ZH

RU

ES

Sampling methods for particulate matter in ambient air

Sampling methods for particulate matter in ambient air, Total:319 items.

In the international standard classification, Sampling methods for particulate matter in ambient air involves: Air quality, Vocabularies, Occupational safety. Industrial hygiene, Wastes, Construction materials, Radiation measurements, Tobacco, tobacco products and related equipment, Welding, brazing and soldering, Analytical chemistry, Microbiology, Physics. Chemistry, Environmental protection, Nuclear energy engineering, Radiation protection.


Standard Association of Australia (SAA), Sampling methods for particulate matter in ambient air

  • AS/NZS 3580.9.3:2015 Methods for sampling and analysis of ambient air, Method 9.3: Determination of suspended particulate matter — Total suspended particulate matter (TSP) — High volume sampler gravimetric method
  • AS/NZS 3580.9.17:2018 Methods for sampling and analysis of ambient air, Method 9.17: Demonstration of equivalence for ambient particulate matter monitoring methods
  • AS/NZS 3580.10.1:2016 Methods for sampling and analysis of ambient air, Method 10.1: Determination of particulate matter — Deposited matter — Gravimetric method
  • AS 3580.9.10:2017 Methods for sampling and analysis of ambient air, Method 9.10: Determination of suspended particulate matter — PM 2. low volume sampler — Gravimetric method
  • AS 3580.9.9:2017 Methods for sampling and analysis of ambient air, Method 9.9: Determination of suspended particulate matter — PM 10 low volume sampler — Gravimetric method
  • AS/NZS 3580.9.7:2009
  • AS 3580.9.7:1990 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM(sub)10(/sub) dichotomous sampler - Gravimetric method
  • AS/NZS 3580.9.12:2022 Methods for sampling and analysis of ambient air, Method 9.12: Determination of suspended particulate matter — PM2.5 beta attenuation monitors
  • AS/NZS 3580.9.11:2022 Methods for sampling and analysis of ambient air, Method 9.11: Determination of suspended particulate matter — PM10 beta attenuation monitors
  • AS/NZS 3580.10.2:2013
  • AS/NZS 3580.9.6:2015
  • AS/NZS 3580.9.15:2014
  • AS 3580.13.3:1993 Methods for sampling and analysis of ambient air Method 13.3: Determination of fluorides-Total gaseous and acid-soluble airborne particulate fluoride-Sodium acetate coated tube absorption
  • AS/NZS 3580.9.12:2013
  • AS/NZS 3580.9.11:2008 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM10 beta attenuation monitors
  • AS/NZS 3580.13.2:2013
  • AS/NZS 3580.14:2014
  • AS 3580.9.8:2001 Methods for sampling and analysis of ambient air Method 9.8: Determination of suspended particulate matter--PM continuous direct mass method using a tapered element oscillating microbalance analyser
  • AS/NZS 3580.9.13:2022 Methods for sampling and analysis of ambient air, Method 9.13: Determination of suspended particulate matter — PM2.5 continuous direct mass method using a tapered element oscillating microbalance monitor
  • AS/NZS 3580.9.14:2013
  • AS 3580.5.1:2023 Methods for sampling and analysis of ambient air, Method 5.1: Determination of oxides of nitrogen — Direct-reading instrumental method
  • AS 1141.32:2008 Methods for sampling and testing aggregates - Weak particles (including clay lumps, soft and friable particles) in coarse aggregates
  • AS 3580.3.1:1990 Methods for sampling and analysis of ambient air - Determination of acid gases - Titrimetric method
  • AS 3580.9.8:2022 Methods for sampling and analysis of ambient air, Method 9.8: Determination of suspended particulate matter — PM10 continuous direct mass method using a tapered element oscillating microbalance analyser
  • AS 3580.8.1:1990 Methods for sampling and analysis of ambient air - Determination of hydrogen sulfide - Automatic intermittent sampling - Gas chromatographic method
  • AS/NZS 3580.11.1:2013
  • AS 3580.6.1:2023 Methods for sampling and analysis of ambient air, Method 6.1: Determination of ozone — Direct-reading instrumental method
  • AS 3580.2.2:1990 Methods for sampling and analysis of ambient air - Preparation of reference test atmospheres - Compressed gas method
  • AS/NZS 3580.15:2014
  • AS/NZS 3580.2.2:2016 Methods for sampling and analysis of ambient air, Method 2.2: Preparation of reference test atmospheres — Compressed gas method
  • AS 3853.2:2006 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator?s breathing zone - Sampling of gases
  • AS 3580.6.1:1990 Methods for sampling and analysis of ambient air - Determination of ozone - Direct-reading instrumental method
  • AS 2365.7:2006 Methods for sampling and analysis of indoor air - Determination of total suspended particulate matter - Gravimetric method
  • AS 3580.4.1:2023 Methods of sampling and analysis of ambient air, Method 4.1: Determination of sulfur dioxide — Direct reading instrumental method
  • AS/NZS 3580.12.1:2015 Methods for sampling and analysis of ambient air, Method 12.1: Determination of light scattering — Integrating nephelometer method
  • AS 3580.7.1:2023 Methods for sampling and analysis of ambient air, Method 7.1: Determination of carbon monoxide — Direct-reading instrumental method
  • AS/NZS 3580.9.13:2013
  • AS/NZS 3580.9.9:2006 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM(sub)10(/sub) low volume sampler - Gravimetric method
  • AS/NZS 3580.9.10:2006 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM (sub)2.5(/sub) low volume sampler - Gravimetric method
  • AS 3580.13.1:1993 Methods for sampling and analysis of ambient air - Determination of fluorides - Gaseous and acid-soluble particulate fluorides - Automated, double paper tape sampling
  • AS 3580.13.2:1991 Methods for sampling and analysis of ambient air - Determination of fluorides - Gaseous and acid-soluble particulate fluorides - Manual, double filter paper sampling
  • AS 3580.9.8:2008 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM10 continuous direct mass method using a tapered element oscillating microbalance analyser
  • AS 3580.5.1:2011
  • AS 3580.4.1:2008 Methods of sampling and analysis of ambient air - Determination of sulfur dioxide - Direct reading instrumental method

Association of German Mechanical Engineers, Sampling methods for particulate matter in ambient air

  • VDI 2463 Blatt 8-2014 Particulate matter measurement - Determination of suspended particulate matter in ambient air and indoor air - Non-fractioning sampling system for low-volume samplers (LVS)
  • VDI 2463 Blatt 7-2014 Particulate matter measurement - Determination of suspended particulate matter and gaseous chemical compounds in ambient air and indoor air - Active sampling via low-volume sampler (LVS)
  • VDI 2463 Blatt 4-1976 Particulate matter measurement; Measurement of particulate matter in ambient air; LIB-filter method
  • VDI 2463 Blatt 1-1999 Particulate matter measurement - Gravimetric determination of mass concentration of suspended particulate matter in ambient air - General principles
  • VDI 3867 Blatt 2-2008 Measurement of particulate matter in ambient air - Methods for characterizing test aerosols - Determination of the particle number concentration and particle size distribution - Condensation Particle Counter (CPC)
  • VDI 2463 Blatt 8-1982 Particulate matter measurement; measurement of mass concentration in ambient air; standard method for the comparsion of nonfractionating methods
  • VDI 2267 Blatt 2-1983 Determination of suspended particulates in ambient air; measurement of lead by X-ray fluorescence
  • VDI 3867 Blatt 4-2011 Measurement of particles in ambient air - Determination of the particle number concentration and particle size distribution of aerosols - Optical aerosol spectrometer
  • VDI 3867 Blatt 5-2013 Measurement of particles in ambient air - Determination of the particle number concentration and particle size distribution of aerosols - Time-of-flight spectrometer
  • VDI 3867 Blatt 3-2012 Measurement of particles in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Electrical mobility spectrometer
  • VDI 3867 Blatt 1-2009 Measurement of particulate matter in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Fundamentals
  • VDI 2463 Blatt 7-1982 Particulate matter measurement; measurement of mass concentration in ambient air; filter method; small filter device GS 050
  • VDI 3867 Blatt 6-2012 Measurement of particles in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Electrical Low Pressure Impactor (ELPI)
  • VDI 2267 Blatt 8-2000 Determination of suspended particles in ambient air - Measurement of the mass concentration of mercury - Sampling by sorption as amalgam and determination by atomic absorption spectrometry (AAS) with cold vapour technique
  • VDI 2463 Blatt 11-1996 Particulate matter measurement - Measurement of mass concentration in ambient air - Filter method; Digitel DHA-80 filter changer
  • VDI 3497 Blatt 4-1991 Determination of particulate anions in ambient air; analysis of chloride, nitrate, and sulphate by ion chromatography using single-column-technique after aerosol sampling on PTFE-filters
  • VDI 2267 Blatt 9-2002 Determination of suspended particulates matter in ambient air - Measurement of the mass concentration of mercury - Sampling by sorption as amalgam and determination by atomic fluorescense spectrometry (AFS) with cold vapour technique
  • VDI 4202 Blatt 1-2010 Performance criteria for performance tests of automated ambient air measuring systems - Point-related measurement methods for gaseous and particulate air pollutants
  • VDI 3497 Blatt 3-1988 Determination of particulate anions in ambient air; analysis of chloride, nitrate, and sulfate by ion chromatography using suppressor technique after aerosol sampling on PTFE-filters
  • VDI 2119-2013 Ambient air measurements - Sampling of atmospheric particles > 2,5 ?m on an acceptor surface using the Sigma-2 passive sampler - Characterisation by optical microscopy and calculation of number settling rate and mass concentration
  • VDI 4252 Blatt 2-2004 Measurement of airborne microorganisms and viruses in ambient air - Active sampling of bioaerosols - Separation of airborne mould on gelatine/polycarbonate filters
  • VDI 4252 Blatt 3-2008 Measurement of airborne microorganisms and viruses in ambient air - Active sampling of bioaerosols - Separation of airborne bacteria with impingers using the principle of critical nozzle
  • VDI 4253 Blatt 2-2004 Measurement of airborne microorganisms and viruses in ambient air - Culture based method for the determination of the concentration of mould in air - Indirect method after sampling with gelatine/polycarbonate filters
  • VDI 4253 Blatt 3-2008 Measurement of airborne microorganisms and viruses in ambient air - Culture based method for the quantitative determination of bacteria in air - Method after separation in liquids

Professional Standard - Environmental Protection, Sampling methods for particulate matter in ambient air

  • HJ 93-2013 Specifications and test procedures for PM<下标10> and PM<下标2.5> sampler
  • HJ 93-2013(XG1-2018) Ambient air particulate matter (PM10 and PM2.5) sampler technical requirements and detection methods "No. 1 Amendment"
  • HJ 1263-2022 Ambient air—Determination of total suspended particle —Gravimetric method
  • HJ 1133-2020 Determination of arsenic, selenium, bismuth and antimony in ambient air and exhaust gas particulate matter by atomic fluorescence method
  • HJ 646-2013 Ambient air and stationary source emissions.Determination of gas and particle-phase polycyclic aromatic hydrocarbons with gas chromatography/mass spectrometry
  • HJ 647-2013 Ambient air and stationary source emissions.Determination of gas and particle-phase polycyclic aromatic hydrocarbons.High performance liquid chromatography
  • HJ 656-2013 Technical specifications for gravimetric measurement methods for PM<下标2.5> in ambient air
  • HJ 1271-2022 Ambient Air—Determination of formic acid, acetic acid and oxalic acid in particulate matter—Ion chromatography
  • HJ 1100-2020 Technical guidelines for automatic monitoring of particulate matter (PM10 and PM2.5) in ambient air by β-ray method
  • HJ 830-2017 Ambient air -Determination of inorganic elements in ambient particle matter- Wavelength dispersive X-ray fluorescence spectroscopy (WD-XRF) method
  • HJ 829-2017 Ambient air -Determination of inorganic elements in ambient particle matter- Energy dispersive X-ray fluorescence spectroscopy (ED-XRF) method
  • HJ 800-2016 Ambient air-Determination of the water soluble cations(Li+、Na+、NH4+、K+、Ca2+、Mg2+) from atmospheric particles-Ion chromatography
  • HJ 656-2013(XG1-2018) Ambient Air Particulate Matter (PM2.5) Manual Monitoring Method (Gravimetric Method) Technical Specification "No. 1 Amendment"
  • HJ 759-2015 Ambient air-Determination of volatile organic compounds- Collected by specially-prepared canistersand analyzed by gas chromatography/mass spectrometry
  • HJ 799-2016 Determination of water-soluble anions (F-, Cl-, Br-, NO2-, NO3-, PO43-, SO32-, SO42-) in ambient air particulate matter by ion chromatography
  • HJ 480-2009 Ambient air.Determination of the fluoride.Filter sampling followed by fluorine ion-selective electrode method
  • HJ 955-2018 Determination of fluoride in ambient air by fluoride ion selective electrode method for filter membrane sampling
  • HJ 955 Determination of ambient air fluoride filter membrane sampling fluoride ion selective electrode method
  • HJ 653-2013 Specifications and test procedures for ambient air quality continuous automated monitoring system for PM<下标10> and PM<下标2.5>
  • HJ 653-2021 Technical requirements and detection methods for continuous automatic monitoring system of ambient air particulate matter (PM10 and PM2.5)
  • HJ 481-2009 Ambient air.Determination of the fluoride.Lime-paper sampling followed by fluorine ion-selective electrode method
  • HJ 644-2013 Ambient air.Determination of volatile organic compounds.Sorbent adsorption and thermal desorption/gas chromatography mass spectrometry method
  • HJ 653-2013(XG1-2018) Ambient Air Particulate Matter (PM10 and PM2.5) Continuous Automatic Monitoring System Technical Requirements and Detection Methods "No. 1 Amendment"

TH-TISI, Sampling methods for particulate matter in ambient air

  • TIS 2574-2012 Airborne particulate matter sampling and analysis in workplace environment

British Standards Institution (BSI), Sampling methods for particulate matter in ambient air

  • PD ISO/TR 14644-21:2023 Cleanrooms and associated controlled environments. Airborne particle sampling techniques
  • BS 1747-6:1983 Methods for measurement of air pollution. Sampling equipment used for the determination of gaseous sulphur compounds in ambient air
  • BS EN 14902:2005 Ambient air quality - Standard method for the measurement of Pb, Cd, AS, and Ni in the PM 10 fraction of suspended particulate matter
  • BS EN 14902:2005(2009) Ambient air quality - Standard method for the measurement of Pb, Cd, AS, and Ni in the PM 10 fraction of suspended particulate matter
  • BS EN ISO 11665-11:2019 Measurement of radioactivity in the environment. Air: radon-222. Test method for soil gas with sampling at depth
  • BS PD CEN/TS 17458:2020 Ambient air. Methodology to assess the performance of receptor oriented source apportionment modelling applications for particulate matter
  • BS ISO 11665-11:2016 Measurement of radioactivity in the environment. Air: radon-222. Test method for soil gas with sampling at depth
  • BS ISO 15202-1:2012 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Sampling
  • BS ISO 15202-1:2020 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Sampling
  • BS EN 12341:2014 Ambient air. Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
  • 22/30443631 DC BS EN 12341. Ambient air. Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
  • BS PD CEN/TS 16868:2015 Ambient air. Sampling and analysis of airborne pollen grains and fungal spores for allergy networks. Volumetric Hirst method
  • BS EN 14907:2005 Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
  • BS EN 14907:2005(2010) Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
  • 21/30404333 DC BS ISO 20044-1. Measurement of radioactivity in the environment. Air: aerosols. Test method using sampling by filter media. Part 1. Aerosols sampling
  • PD ISO/TS 4240-1:2023 Fine bubble technology. Environmental applications. Inspection method using online particle counter in dissolved air flotation (DAF) plant
  • 21/30394853 DC BS EN ISO 23861. Workplace air. Chemical agent present as a mixture of airborne particles and vapours. Requirements for evaluation of measuring procedures using samplers
  • BS ISO 20045:2023 Measurement of the radioactivity in the environment. Air: tritium. Test method using bubbler sampling
  • BS ISO 20044:2022 Measurement of radioactivity in the environment. Air: aerosols. Test method using sampling by filter media
  • 19/30383008 DC BS ISO 15202-1. Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Part 1. Sampling
  • BS 1747-9:1987 Methods for measurement of air pollution. Determination of the mass concentration of nitrogen oxides in ambient air: chemiluminescence method
  • BS 1747-13:1994 Methods for measurement of air pollution. Determination of the particulate lead content of aerosols collected on filters: atomic absorption spectrometric method
  • 19/30383011 DC BS ISO 15202-2. Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Part 2. Sample preparation
  • BS ISO 15202-2:2020 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Sample preparation
  • 22/30404742 DC BS ISO 20045. Measurement of the radioactivity in the environment. Air: tritium. Test Method using bubbler sampling
  • PD ISO/TS 21361:2019 Nanotechnologies. Method to quantify air concentrations of carbon black and amorphous silica in the nanoparticle size range in a mixed dust manufacturing environment

Professional Standard - Agriculture, Sampling methods for particulate matter in ambient air

  • 空气和废气监测分析方法 7.2.3-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulate Matter Chapter 2 Sample Collection of Atmospheric Particulate Matter Emission Sources Three-source Sample Collection Methods
  • 空气和废气监测分析方法 7.2.4-2003 Part Seven Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulate Matter Chapter Two Atmospheric Particulate Matter Emission Source Sample Collection Four-source Sample Processing Methods
  • 空气和废气监测分析方法 7.3.4-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulates Chapter 3 Environmental Receptor Sample Collection 4 Sampling Time Sampling Period and Sampling Requirements
  • 空气和废气监测分析方法 7.2.2-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulate Matter Chapter 2 Sample Collection of Atmospheric Particulate Matter Emission Sources 2 Other Classification Methods
  • 空气和废气监测分析方法 7.2.1-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulate Matter Chapter 2 Sample Collection of Atmospheric Particulate Matter Emission Sources—Classification of Particulate Matter Pollutio
  • 空气和废气监测分析方法 7.3.2-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulates Chapter 3 Environmental Receptor Sample Collection 2 Sampling Instrument Selection
  • GB/T 16157-1996(XG1-2018) "Determination of Particulate Matter in Exhaust from Stationary Pollution Sources and Sampling Methods of Gaseous Pollutants" Amendment No. 1
  • 空气和废气监测分析方法 7.3.5-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulates Chapter 3 Environmental Receptor Sample Collection 5 Sample Storage and Transportation
  • GB/T 15432-1995(XG1-2018) Gravimetric Method for Determination of Total Suspended Particulate Matter in Ambient Air "Revision No. 1"
  • 空气和废气监测分析方法 7.3.3-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulates Chapter 3 Environmental Receptor Sample Collection Three Filter Membrane Selection
  • 空气和废气监测分析方法 7.3.1-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulates Chapter 3 Environmental Receptor Sample Collection Point and Layout Principle
  • HJ 759-2023 Determination of 65 Volatile Organic Compounds in Ambient Air Tank Sampling/Gas Chromatography-Mass Spectrometry
  • 空气和废气监测分析方法 7.4.1-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulates Chapter 4 Analytical Methods of Source and Receptor Samples—Weighing of Filter
  • 空气和废气监测分析方法 7.4.2-2003 Part Seven Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particles Chapter Four Analytical Methods of Source and Receptor Samples Two Analytical Techniques of Source and Receptor Samples
  • 空气和废气监测分析方法 7.5.1-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulate Matter
  • 空气和废气监测分析方法 7.5.2-2003 Part Seven Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulate Matter
  • 空气和废气监测分析方法 7.6.2-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulates
  • 空气和废气监测分析方法 7.5.4-2003 Part Seven Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particles Chapter Five Particle Composition Spectrum Establishment Four Source and Receptor Composition Spectrum Data Evaluation
  • 空气和废气监测分析方法 7.5.3-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulate Matter Chapter 5 Establishment of Particulate Matter Composition Spectrum Three Sources and Receptor Chemical Composition Scope
  • 空气和废气监测分析方法 7.6.1-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Analysis of Ambient Air Particulates
  • 空气和废气监测分析方法 7.6.3-2003 Chapter 7 The Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Analysis of Ambient Air Particulates

KR-KS, Sampling methods for particulate matter in ambient air

  • KS B 5645-2018(2023) Automatic moniters for suspended particulate matter in ambient air
  • KS I ISO 10473-2020 Ambient air — Measurement of the mass of particulate matter on a filter medium — Beta-ray absorption method
  • KS I ISO 15202-1-2019 Workplace air — Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry — Part 1: Sampling
  • KS I ISO 15202-2-2019 Workplace air — Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry — Part 2: Sample preparation

Association Francaise de Normalisation, Sampling methods for particulate matter in ambient air

  • XP X43-058:2007 Ambient air - Determination of crop protection substances (pesticides) in ambient air - Active sampling
  • NF ISO 20044:2023 Mesurage de la radioactivité dans l'environnement - Air : particules d'aérosol - Méthode d'essai utilisant l'échantillonnage par un média filtrant
  • NF EN 14902:2005 Qualité de l'air ambiant - Méthode normalisée pour la mesure du plomb, cadmium, de l'arsenic et du nickel dans la fraction MP10 de la matière particulaire en suspension
  • NF X43-023:1991 Air quality. Ambient atmosphere. Measurement of the concentration of particulate matter suspended in the ambient air. Gravimetric method.
  • NF EN 16868:2019 Air ambiant - Échantillonnage et analyse des grains de pollen en suspension dans l'air et des spores fongiques pour les réseaux relatifs à l'allergie - Méthode volumétrique de Hirst
  • NF X43-026*NF EN 14902:2005 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter.
  • XP X43-458*XP CEN/TS 17458:2021 Ambient air - Methodology to assess the performance of receptor oriented source apportionment modelling applications for particulate matter
  • NF ISO 10473:2000 Air ambiant - Mesurage de la masse des matières particulaires sur un milieu filtrant - Méthode par absorption de rayons bêta
  • NF ISO 20045:2023 Mesurage de la radioactivité dans l'environnement - Air : tritium - Méthode d'essai à l'aide d'un prélèvement par barbotage
  • NF X43-055:2007 Ambient air - Metrology applied to the measurement of gaseous atmospheric pollutants - Sampling of ambient air and implementation of calibration gases.
  • NF EN ISO 11665-11:2019 Mesurage de la radioactivité dans l'environnement - Air : radon 222 - Partie 11 : méthode d'essai pour le gaz du sol avec un prélèvement en profondeur
  • NF X43-142*NF EN 17346:2020 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive Samplers
  • NF EN 17346:2020 Air ambiant - Méthode normalisée pour la détermination de la concentration en ammoniac au moyen d'échantillonneurs par diffusion
  • NF EN 16339:2013 Air ambiant - Méthode pour la détermination de la concentration du dioxyde d'azote au moyen d'échantillonneurs par diffusion
  • NF EN 12341:2014 Air ambiant - Méthode normalisée de mesurage gravimétrique pour la détermination de la concentration massique MP10 ou MP2,5 de matière particulaire en suspension
  • NF X43-049*NF EN 12341:2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
  • NF ISO 15202-1:2020 Air des lieux de travail - Détermination des métaux et métalloïdes dans les particules en suspension dans l'air par spectrométrie d'émission atomique avec plasma à couplage inductif - Partie 1 : prélèvement d'échantillons
  • NF EN 16414:2014 Air ambiant - Biosurveillance à l'aide de mousses - Accumulation des contaminants atmosphériques dans les mousses prélevées in situ : de la récolte à la préparation des échantillons
  • XP CEN/TS 17458:2021 Air ambiant - Méthode d'évaluation de la performance d'applications d'un système de modélisation de la contribution des sources de particules en suspension de type "récepteur-orienté"
  • NF V37-046*NF ISO 18144:2004 Environmental tobacco smoke - Estimation of its contribution to respirable suspended particles - Method based on solanesol.
  • NF EN ISO 16017-2:2003 Air intérieur, air ambiant et air des lieux de travail - Échantillonnage et analyse des composés organiques volatils par tube à adsorption/désorption thermique/chromatographie en phase gazeuse sur capillaire - Partie 2 : échantillonnage par diffu...
  • NF X43-355*NF EN 15841:2010 Ambient air quality - Standard method for determination of arsenic, cadmium, lead and nickel in atmospheric deposition.
  • NF EN 14662-1:2005 Qualité de l'air ambiant - Méthode normalisée pour le mesurage des concentrations en benzène - Partie 1 : échantillonnage par pompage suivi d'une désorption thermique et d'une méthode chromatographie en phase gazeuse
  • NF ISO 15202-2:2020 Air des lieux de travail - Détermination des métaux et métalloïdes dans les particules en suspension dans l'air par spectrométrie d'émission atomique avec plasma à couplage inductif - Partie 2 : préparation des échantillons
  • NF X44-014-5*NF EN ISO 29463-5:2022 High-efficiency filters and filter media for removing particles in air - Part 5 : test method for filter elements
  • NF M60-764:2004 Nuclear energy - Measurement of environmental radioactivity - Air - Radon 222 : methods for integrated measurement of the alpha potential energy of short-life decay products of radon in the atmospheric environment.
  • NF M60-765:2004 Nuclear energy - Measurement of radioactivity in the enviromment - Air - Radon 222 : methods for spot measurement of the alpha potential energy of short-life decay products of radon in the atmospheric environnement.
  • FD X43-070-6:2019 Air quality - Practical guidance for estimating the uncertainty of measurement on polluant concentration in ambient air - Part 6 : estimation of the uncertainties on mass concentrations of particulate matters measured automatically
  • NF EN ISO 29463-5:2022 Filtres à haut rendement et filtres pour l'élimination des particules dans l'air - Partie 5 : méthode d'essai des éléments filtrants
  • NF M60-763:2004 Nuclear energy - Measurement of radioactivity in the enviromment - Air - Radon 222 and its short-life decay products in the atmospheric environment : their origins and measuring methods.
  • NF M60-763:1998 Nuclear energy. Measurement of radioactivity in the environment-Air. Radon 222 and its short-life decay products in the atmospheric environment : their origins and measuring methods.
  • NF EN ISO 29463-3:2018 Filtres à haut rendement et filtres pour l'élimination des particules dans l'air - Partie 3 : méthode d'essai des filtres à feuille plate

NZ-SNZ, Sampling methods for particulate matter in ambient air

  • AS/NZS 3580.17:2016 Methods for sampling and analysis of ambient air Method 17: Determination of gaseous compounds in ambient air-Direct-reading cavity ring-down spectroscopy instrumental method

International Organization for Standardization (ISO), Sampling methods for particulate matter in ambient air

  • ISO 20044:2022 Measurement of radioactivity in the environment — Air: aerosol particles — Test method using sampling by filter media
  • ISO 4219:1979 Air quality; Determination of gaseous sulphur compounds in ambient air; Sampling equipment
  • ISO 9855:1993 Ambient air; determination of the particulate lead content of aerosols collected on filters; atomic absorption spectrometric method
  • ISO 22253:2019 Cigarettes — Determination of nicotine in total particulate matter from the mainstream smoke with an intense smoking regime — Gas-chromatographic method
  • ISO 12884:2000 Ambient air - Determination of total (gas- and particle-phase) polycyclic aromatic hydrocarbons - Collection on sorbent-backed filters with gas chromatographic/mass spectrometric analyses
  • ISO 11665-11:2016 Measurement of radioactivity in the environment — Air: radon-222 — Part 11: Test method for soil gas with sampling at depth
  • ISO 15202-1:2012 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 1: Sampling
  • ISO 15202-1:2000 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 1: Sampling
  • ISO/TS 4240-1:2023 Fine bubble technology — Environmental applications — Part 1: Inspection method using online particle counter in dissolved air flotation (DAF) plant
  • ISO/FDIS 20045 Measurement of the radioactivity in the environment – Air: tritium – Test Method using bubbler sampling
  • ISO 20045 Measurement of the radioactivity in the environment – Air: tritium – Test Method using bubbler sampling
  • ISO 20045:2023 Measurement of the radioactivity in the environment — Air: tritium — Test method using bubbler sampling
  • ISO/TS 21361:2019 Nanotechnologies — Method to quantify air concentrations of carbon black and amorphous silica in the nanoparticle size range in a mixed dust manufacturing environment
  • ISO 15202-2:2012 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 2: Sample preparation
  • ISO 15202-2:2001 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 2: Sample preparation
  • ISO 15202-1:2020 Workplace air — Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry — Part 1: Sampling
  • ISO 15202-2:2020 Workplace air — Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry — Part 2: Sample preparation

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Sampling methods for particulate matter in ambient air

  • GB/T 15432-1995 Ambient Air--Determination of total suspended particulates--Gravimetric method
  • GB/T 16157-1996 The determination of particulates and sampling methods of gaseous pollutants emitted from exhaust gas of stationary source

Shandong Provincial Standard of the People's Republic of China, Sampling methods for particulate matter in ambient air

  • DB37/T 4378-2021 Portable beta-ray method for the determination of particulate matter in ambient air
  • DB37/T 4434-2021 Determination of 57 kinds of ozone precursors in ambient air by tank sampling gas chromatography-hydrogen flame ionization detector mass spectrometry

AWS - American Welding Society, Sampling methods for particulate matter in ambient air

  • F1.1-1985 METHOD FOR SAMPLING AIRBORNE PARTICULATES GENERATED BY WELDING AND ALLIED PROCESSES

AENOR, Sampling methods for particulate matter in ambient air

  • UNE-EN 14902:2006 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
  • UNE 77202:1991 AIR QUALITY. DETERMINATION OF GASEOUS SULPHUR COMPOUNDS IN AMBIENT AIR. SAMPLING EQUIPMENT.
  • UNE-ISO 10473:2005 Ambient air -- Measurement of the mass of particulate matter on a filter medium -- Beta-ray absorption method
  • UNE-EN 16414:2014 Ambient air - Biomonitoring with mosses - Accumulation of atmospheric contaminants in mosses collected in situ: from the collection to the preparation of samples
  • UNE-EN 12341:2015 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter

Danish Standards Foundation, Sampling methods for particulate matter in ambient air

  • DS/EN 14902/AC:2007 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
  • DS/EN 14902:2005 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
  • DS/CEN/TS 17458:2021 Ambient air – Methodology to assess the performance of receptor oriented source apportionment modelling applications for particulate matter
  • DS/EN 14907:2005 Ambient air quality - Reference gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
  • DS/EN 14662-3:2005 Ambient Air Quality - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography

Lithuanian Standards Office , Sampling methods for particulate matter in ambient air

  • LST EN 14902-2005 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
  • LST EN 14902-2005/AC-2007 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
  • LST CEN/TS 17458-2021 Ambient air - Methodology to assess the performance of receptor oriented source apportionment modelling applications for particulate matter
  • LST ISO 10473:2001 Ambient air. Measurement of the mass of particulate matter on a filter medium. Beta-ray absorption method
  • LST EN 14907-2005 Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
  • LST EN 12341-2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
  • LST EN 14662-3-2005 Ambient Air Quality - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography

PL-PKN, Sampling methods for particulate matter in ambient air

  • PN Z04008-07-1989 Air puri?y pro?ection Sampling methods Prindplcs of air sampling in work environment and interpretation of results
  • PN Z04092-08-1989 Air purity protection Tests for nitric acid and nitrogen oxides Determination of nitrogen dioxide in ambient air (imision) by spectrophotometric method with passive sampling

IN-BIS, Sampling methods for particulate matter in ambient air

German Institute for Standardization, Sampling methods for particulate matter in ambient air

  • DIN EN 14902:2005-10 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter; German version EN 14902:2005
  • DIN EN 14902 Berichtigung 1:2007-01 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter; German version EN 14902:2005, Corrigenda to DIN EN 14902:2005-10; German version EN 14902:2005/AC:2006
  • DIN EN 14902:2005 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter; English version of DIN EN 14902
  • DIN CEN/TS 17458:2021-02 Ambient air - Methodology to assess the performance of receptor oriented source apportionment modelling applications for particulate matter; German version CEN/TS 17458:2020
  • DIN ISO 10473:2002-08 Ambient air - Measurement of the mass of particulate matter on a filter medium - Beta-ray absorption method (ISO 10473:2000)
  • DIN ISO 12884:2000 Ambient air - Determination of total (gas and particle phase) polycyclic aromatic hydrocarbons - Collection on sorbent-backed filters with gas chromatographic/mass spectrometric analysis (ISO 12884:2000)
  • DIN ISO 2889 Beiblatt 2:2012-08 Sampling airborne radioactive materials from the stacks and ducts of nuclear facilities - Supplement 2: Assessment of the changes in the concentration of aerosol particles due to non-isokinetic sampling
  • DIN EN 16868:2019-09 Ambient air - Sampling and analysis of airborne pollen grains and fungal spores for networks related to allergy - Volumetric Hirst method; German version EN 16868:2019
  • DIN EN 17346:2020-08 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers; German version EN 17346:2020
  • DIN EN 12341:2022 Ambient air - Standard gravimetric measurement method for the determination of the PM or PM mass concentration of suspended particulate matter; German and English version prEN 12341:2022
  • DIN EN 16868:2019 Ambient air - Sampling and analysis of airborne pollen grains and fungal spores for networks related to allergy - Volumetric Hirst method
  • DIN EN 14902 Berichtigung 1:2007 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter; German version EN 14902:2005, Corrigenda to DIN EN 14902:2005-10; German version EN 14902:2005/AC:2006
  • DIN EN 14907:2005 Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter; English version of DIN EN 14907
  • DIN ISO 2889 Beiblatt 1:2012-10 Sampling airborne radioactive materials from the stacks and ducts of nuclear facilities - Supplement 1: Distribution of activity via the diameter of aerosol particles
  • DIN CEN/TS 17458:2021 Ambient air - Methodology to assess the performance of receptor oriented source apportionment modelling applications for particulate matter; German version CEN/TS 17458:2020
  • DIN EN ISO 23861:2023 Workplace air - Chemical agent present as a mixture of airborne particles and vapour - Requirements for evaluation of measuring procedures using samplers (ISO 23861:2022)
  • DIN ISO 5884:2020-11 Aerospace series - Fluid systems and components - Methods for system sampling and measuring the solid particle contamination in hydraulic fluids (ISO 5884:2018)
  • DIN EN 12341:2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter; German version EN 12341:2014
  • DIN EN 14662-4:2005-08 Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography; German version EN 14662-4:2005
  • DIN ISO 5884:2020 Aerospace series - Fluid systems and components - Methods for system sampling and measuring the solid particle contamination in hydraulic fluids (ISO 5884:2018)
  • DIN EN 12341:2023-10 Ambient air - Standard gravimetric measurement method for the determination of the PM<(Index)10> or PM<(Index)2,5> mass concentration of suspended particulate matter; German version EN 12341:2023

ES-UNE, Sampling methods for particulate matter in ambient air

  • UNE-EN 14902:2006/AC:2006 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
  • UNE-CEN/TS 17458:2020 Ambient air - Methodology to assess the performance of receptor oriented source apportionment modelling applications for particulate matter (Endorsed by Asociación Española de Normalización in February of 2021.)
  • UNE-EN 17346:2021 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers
  • UNE-EN ISO 11665-11:2019 Measurement of radioactivity in the environment - Air: radon-222 - Part 11: Test method for soil gas with sampling at depth (ISO 11665-11:2016) (Endorsed by Asociación Española de Normalización in November of 2019.)
  • UNE-EN 16868:2020 Ambient air - Sampling and analysis of airborne pollen grains and fungal spores for networks related to allergy - Volumetric Hirst method

VN-TCVN, Sampling methods for particulate matter in ambient air

  • TCVN 6152-1996 Ambient air.Determination of the particulate lead content of aerosols collected on filters.Atomic absorption spectrometric method

Korean Agency for Technology and Standards (KATS), Sampling methods for particulate matter in ambient air

  • KS I ISO 9855:2005 Ambient air-Determination of the particulate lead content of aerosols collected on filters(Atomic absorption spectrometric method)
  • KS I ISO 10473:2020 Ambient air — Measurement of the mass of particulate matter on a filter medium — Beta-ray absorption method
  • KS I 2209-2008 Form, size and performance testing methods of filtration media for collecting airborne particulate matters
  • KS I ISO 12884:2008 Ambient air-Determination of total (gas and particle-phase) polycyclic aromatic hydrocarbons-Collection on sorbent-backed filters with gas chromatographic/mass spectrometric analyses
  • KS I ISO 9855-2005(2020) Ambient air-Determination of the particulate lead content of aerosols collected on filters(Atomic absorption spectrometric method)
  • KS I ISO 15202-1:2006 Workplace air-Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry-Part 1:Sampling
  • KS I ISO 15202-1:2014 Workplace air — Determination of metals and metalloids in Workplace air — Determination of metals and metalloids in emission spectrometry — Part 1: Sampling
  • KS I 30011-2012 Workplace air-Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry
  • KS I ISO 15202-2:2008 Workplace air-Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry-Part 2:Sample preparation
  • KS I ISO 15202-2:2014 Workplace air — Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry — Part 2: Sample preparation
  • KS I ISO 15202-1:2019 Workplace air — Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry — Part 1: Sampling
  • KS I ISO 15202-2:2019 Workplace air — Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry — Part 2: Sample preparation

NL-NEN, Sampling methods for particulate matter in ambient air

  • NEN 2785-1990 Air quality - Ambient air - Collection of particulate matter for the determination of the content of metals - HVS-method

American Society for Testing and Materials (ASTM), Sampling methods for particulate matter in ambient air

  • ASTM D4096-91(1997)e1 Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High-Volume Sampler Method)
  • ASTM D8358-21 Standard Guide for Assessment and Inclusion of Wall Deposits in the Analysis of Single-Stage Samplers for Airborne Particulate Matter
  • ASTM D3685/D3685M-13(2021) Standard Test Methods for Sampling and Determination of Particulate Matter in Stack Gases
  • ASTM D4600-95(2016) Standard Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres
  • ASTM D6209-98(2012) Standard Test Method for Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air (Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Anal
  • ASTM D6209-13 Standard Test Method for Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air (Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Anal
  • ASTM D4600-95(2000)e1 Standard Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres
  • ASTM D6831-02 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
  • ASTM D6831-11 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
  • ASTM D6831-11(2018) Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
  • ASTM D3267-91(2000)e1 Standard Test Method for Separation and Collection of Particulate and Water-Soluble Gaseous Fluorides in the Atmosphere (Filter and Impinger Method)
  • ASTM D4096-17 Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High–Volume Sampler Method)
  • ASTM D4096-17(2017) Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High–Volume Sampler Method)
  • ASTM D4532-10 Standard Test Method for Respirable Dust in Workplace Atmospheres Using Cyclone Samplers
  • ASTM D4532-15 Standard Test Method for Respirable Dust in Workplace Atmospheres Using Cyclone Samplers
  • ASTM D7650-13 Standard Test Method for Sampling of Particulate Matter in High Pressure Hydrogen used as a Gaseous Fuel with an In-Stream Filter
  • ASTM D6209-98e1 Standard Test Method for Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air (Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Analysis)
  • ASTM D6209-98(2004) Standard Test Method for Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air (Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Analysis)
  • ASTM D6494-99 Standard Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction
  • ASTM D6494-99(2004)e1 Standard Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction
  • ASTM D6209-21 Standard Test Method for Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air (Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Anal
  • ASTM D6494-99(2010) Standard Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction
  • ASTM D6494-99(2015) Standard Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction
  • ASTM D3266-91(2000)e1 Standard Test Method for Automated Separation and Collection of Particulate and Acidic Gaseous Fluoride in the Atmosphere (Double Paper Tape Sampler Method)
  • ASTM D3266-91(2018) Standard Test Method for Automated Separation and Collection of Particulate and Acidic Gaseous Fluoride in the Atmosphere (Double Paper Tape Sampler Method)
  • ASTM D3266-91(2011) Standard Test Method for Automated Separation and Collection of Particulate and Acidic Gaseous Fluoride in the Atmosphere (Double Paper Tape Sampler Method)
  • ASTM D7439-21 Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry
  • ASTM F306-70(1999) Practice for Sampling Particulates from Man-Accessible Storage Vessels for Aerospace Fluids by Vacuum Entrainment Technique (General Method) (Withdrawn 2000)
  • ASTM D1704/D1704M-95e1 Standard Test Method for Determining the Amount of Particulate Matter in the Atmosphere by Measurement of the Light Absorbance of a Filter Sample
  • ASTM D6831-05a Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
  • ASTM D6831-05 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
  • ASTM E2864-18 Standard Test Method for Measurement of Airborne Metal Oxide Nanoparticle Surface Area Concentration in Inhalation Exposure Chambers using Krypton Gas Adsorption
  • ASTM F25/F25M-21 Standard Test Method for Sizing and Counting Airborne Particulate Contamination in Cleanrooms and Other Dust-Controlled Areas

IT-UNI, Sampling methods for particulate matter in ambient air

  • UNI CEN/TS 17458-2021 Ambient air - Methodology to assess the performance of receptor oriented source apportionment modelling applications for particulate matter

European Committee for Standardization (CEN), Sampling methods for particulate matter in ambient air

  • CEN/TS 17458:2020 Ambient air - Methodology to assess the performance of receptor oriented source apportionment modelling applications for particulate matter
  • PD CEN/TS 17458:2020 Ambient air - Methodology to assess the performance of receptor oriented source apportionment modelling applications for particulate matter
  • EN 12341:2023 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
  • EN ISO 11665-11:2019 Measurement of radioactivity in the environment - Air: radon-222 - Part 11: Test method for soil gas with sampling at depth (ISO 11665-11:2016)
  • FprEN 12341 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
  • EN 14907:2005 Ambient air quality Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
  • EN 14902:2005 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
  • EN 16414:2014 Ambient air - Biomonitoring with mosses - Accumulation of atmospheric contaminants in mosses collected in situ: from the collection to the preparation of samples

未注明发布机构, Sampling methods for particulate matter in ambient air

  • BS EN 12341:2023 Ambient air — Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter

Japanese Industrial Standards Committee (JISC), Sampling methods for particulate matter in ambient air

  • JIS Z 8813:1994 Measuring methods for suspended particulate matter concentration in air-general requirements
  • JIS K 0901:1991 Form, size and performance testing methods of filtration media for collecting airborne particulate matters

Anhui Provincial Standard of the People's Republic of China, Sampling methods for particulate matter in ambient air

  • DB34/T 392-2004 Test method for laser determination of inhalable particulate matter in indoor air

Professional Standard - Nuclear Industry, Sampling methods for particulate matter in ambient air

  • EJ 192.1-1982 Environmental samples.Method for analyzing fluoride content in atmosphere

Heilongjiang Provincial Standard of the People's Republic of China, Sampling methods for particulate matter in ambient air

  • DB23/T 2076-2018 Determination of Pb, Cd and As elements in ambient air fine particulate matter (PM2.5) by wavelength dispersive-X-ray fluorescence spectrometry

CEN - European Committee for Standardization, Sampling methods for particulate matter in ambient air

  • PREN 16868-2017 Ambient air - Sampling and analysis of airbone pollen grains and fungal spores for networks related to allergy - Volumetric Hirst method
  • EN 16868:2019 Ambient air - Sampling and analysis of airbone pollen grains and fungal spores for networks related to allergy - Volumetric Hirst method

PT-IPQ, Sampling methods for particulate matter in ambient air

Liaoning Provincial Standard of the People's Republic of China, Sampling methods for particulate matter in ambient air

  • DB21/T 3071-2018 Determination of Volatile Organic Compounds in Ambient Air Passive Sampling/Thermal Desorption/Gas Chromatography-Mass Spectrometry

BE-NBN, Sampling methods for particulate matter in ambient air

  • NBN T 94-201-1975 Air sampling and analysis methods — Determination of sulphur dioxide (SO2) content in ambient air — Hydrogen peroxide method

国家文物局, Sampling methods for particulate matter in ambient air

  • WW/T 0047-2012 Gas Diffusion Sampling and Determination Method for Environmental Detection of Cultural Relics Preservation in Collections Determination of Ammonia
  • WW/T 0046-2012 Gas diffusion sampling and determination method for environmental testing of cultural relics in collections. Determination of formic acid and acetic acid.

RU-GOST R, Sampling methods for particulate matter in ambient air

  • GOST R ISO 15202-1-2014 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Part 1. Sampling
  • GOST R 56929-2016 Emissions of the polluting substances in the atmosphere. Research of fractional composition of dust by optical method at rationing quality of atmospheric air
  • GOST R ISO 15202-2-2014 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Part 2. Sample preparation

IX-EU/EC, Sampling methods for particulate matter in ambient air

  • 1999/30/EC-1999 Council Directive Relating to Limit Values for Sulphur Dioxide, Nitrogen Dioxide and Oxides of Nitrogen, Particulate Matter and Lead in Ambient Air

国家市场监督管理总局、中国国家标准化管理委员会, Sampling methods for particulate matter in ambient air

  • GB/T 35097-2018 Microbeam analysis—Scanning electron microscopy with energy dispersive X-ray spectrosmetry—Determination of numberical concentration of inorganic fibrous particles in ambient air




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved