ZH
RU
ES

Glass material model

Glass material model, Total:500 items.

In the international standard classification, Glass material model involves: Aircraft and space vehicles in general, Glass, Thermodynamics and temperature measurements, Protection of and in buildings, Materials for the reinforcement of composites, Equipment for the chemical industry, Reinforced plastics, Insulating materials, Protection against crime, Road vehicle systems, Medical equipment, Wastes, Construction materials, Bottles. Pots. Jars, Materials for aerospace construction, Vocabularies, Road engineering, Measurement of volume, mass, density, viscosity, Paints and varnishes, Seals, glands, Rubber and plastics products, Shipbuilding and marine structures in general, TESTING, Elements of buildings, Refractories, Kitchen equipment, Installations in buildings, Heat recovery. Thermal insulation, Transport, Plastics, Waxes, bituminous materials and other petroleum products, Small craft, Analytical chemistry, Pipeline components and pipelines, Petroleum, petroleum products and natural gas handling equipment, ENERGY AND HEAT TRANSFER ENGINEERING, Raw materials for rubber and plastics, Rails and railway components, Insulation, Products of the textile industry, Non-ferrous metals, Seagoing vessels, Products of the chemical industry, Solar energy engineering.


FMVSS - Federal Motor Vehicle Safety Standards, Glass material model

U.S. Military Regulations and Norms, Glass material model

Professional Standard - Building Materials, Glass material model

  • JC/T 425-1991 glassy carbon material
  • JC/T 1008-2018 Prevent weathering of glass material used on glass
  • JC/T 1008-2006 Prevent weathering of glass material used on glass
  • JC/T 941-2004 Pultruded glass fiber reinforced plastics hollow section for doors and windows
  • JC/T 490-2010 Dimensional tolerance of thermosetting glass fibre reinforced plastics pultruded shapes
  • JC/T 805-1988 Test method for exudating temperature of glass phase of refractory for glass melting furnace
  • JC/T 805-2013 Test method for exudating temperature of glass phase of refractory for glass furnace
  • JC/T 676-1997 Test method for flexure of glass material
  • JC/T 806-1988 Method for static test for corrasion resistance of refractories of glass melting furnace to molten glass
  • JC/T 806-2013 Test method of static corrosion resistance of refractories for glass furnace to molten glass
  • JC/T 490-1992 Dimensional tolerance of extruded sections of fiber glass reinforced thermosetting plastic

国家建筑材料工业局, Glass material model

  • JC 425-1991 glassy carbon materials
  • JC/T 490-1991 Dimensional tolerances for glass fiber reinforced thermoset plastic pultruded profiles

ZA-SANS, Glass material model

  • SANS 1263-3:2007 Safety and security glazing materials for buildings Part 3: Bullet-resistant glazing materials
  • SANS 1263-2:2007 Safety and security glazing materials for buildings Part 2: Burglar-resistant and vandal-resistant glazing materials
  • SANS 1472:2005 Plastics safety glazing materials for motor vehicles
  • SANS 51424:1997 Road marking materials - Premix glass beads
  • SANS 1263-1:2006 Safety and security glazing materials for buildings Part 1: Safety performance of glazing materials under human impact

(U.S.) Ford Automotive Standards, Glass material model

Association Francaise de Normalisation, Glass material model

  • NF C26-157-1*NF EN 61067-3-1:1995 Glass and glass polyester fibre woven tapes. Part 3 : specifications for individual materials. Sheet 1 : types 1, 2 and 3 tapes.
  • NF H35-081:2008 Bottling industry - Glass bottles - 27, 29, 34 head cork stopper - Neck glass finish - Composite stopper - Overcapsule.
  • NF H35-081:1991 Bottling industry. Glass bottles. 27, 29, 34 head cork stopper. Neck glass finish. Composite stopper. Overcapsule.
  • NF R18-230:1979 Rubber strips for fixed windows.
  • NF EN 3861:2013 Série aérospatiale - Matériaux non-métalliques - Transparents en verre - Norme de matériaux - Feuilles de verre sodo calcique flotté trempées thermiquement
  • NF EN 3862:2013 Série aérospatiale - Matériaux non-métalliques - Transparents en verre - Norme de matériaux - Feuilles de verre sodo calcique flotté trempées chimiquement
  • NF D11-112:1987 Sanitary appliances. Vitreous enamelled materials baths.
  • NF L17-705*NF EN 3861:2013 Aerospace series - Non-metallic materials - Glass transparencies - Material standard - Thermally tempered soda lime float glass
  • NF L17-706*NF EN 3862:2013 Aerospace series - Non-metallic materials - Glass transparencies - Material standard - Chemically tempered soda lime float glass
  • NF C26-401-3*NF EN 60672-3:1998 Ceramic and glass-insulating materials. Part 3 : specifications for individual materials.
  • NF R14-601:2000 Road vehicles - Tests for rigid plastic safety glazing materials.
  • NF P98-660:1997 Road marking materials. Drop on materials. Glass beads, antiskid aggregates and mixtures of the two.
  • NF P78-201-1-2:2006 Building works - Glazing and mirror-glass works - Part 1-2 : general criteria for selection of materials.
  • NF R14-602:2000 Road vehicles - Safety glazing materials - Mechanical tests.
  • NF B40-106:1973 Produits réfractaires - Dimensions des briques d'empilage pour four de verrerie.
  • NF EN 61067-3-1:1995 Rubans tissés en fibres de verre et en fibres de verre et de polyester - Partie 3 : spécifications pour les matériaux particuliers - Feuille 1 : rubans de types 1, 2 et 3
  • NF EN 15683-1:2013 Verre dans la construction - Verre de silicate sodo-calcique profilé de sécurité trempé thermiquement - Partie 1 : définition et description
  • NF T57-153:1973 PLASTICS MATERIALS REINFORCED WITH TEXTILE GLASS. PREPARATION OF GLASS FIBRE REINFORCED,RESIN BONDED,LOW-PRESSURE LAMINATED PLATES OR PANELS FOR TEST PURPOSES.
  • NF F56-101:1976 Fixed railway installations. Equipment for overhead telecommunication and signalling lines. Type dc 3 glass insulators.
  • NF M87-243-1:2003 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1 : vocabulary, symbols, applications and materials.
  • NF M87-243-1*NF EN ISO 14692-1:2017 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1 : vocabulary, symbols, applications and materials
  • NF EN ISO 14692-1:2017 Industries du pétrole et du gaz naturel - Canalisations en plastique renforcé de verre (PRV) - Partie 1 : vocabulaire, symboles, applications et matériaux
  • NF EN 61006:2004 Matériaux isolants électriques - Méthodes d'essai pour la détermination de la température de transition vitreuse
  • NF ISO 11336-1:2012 Grands yachts - Résistance, étanchéité aux intempéries et étanchéité à l'eau des ouvertures vitrées - Partie1 : critères de conception, matériaux, encadrement et essais des ouvertures vitrées indépendantes
  • NF EN 60672-3:1998 Matériaux isolants à base de céramique ou de verre - Partie 3 : spécifications pour matériaux particuliers.
  • NF EN 1170-8:2008 Méthode d'essai des composites ciment-verre - Partie 8 : essai type de durabilité par cycle

Taiwan Provincial Standard of the People's Republic of China, Glass material model

Korean Agency for Technology and Standards (KATS), Glass material model

Cooling Technology Institute, Glass material model

Japanese Industrial Standards Committee (JISC), Glass material model

GOSTR, Glass material model

  • GOST R 57801-2017 Pultruded profiles from glass-fiber-reinforced plastic. Tolerances
  • GOST 9553-2017 Glass and glass products. Density determination method
  • GOST 11103-2018 Inorganic glass and glass-ceramic materials. Heat resistance determination method
  • GOST 10134.3-2017 Glass and glass products. Methods for determination of chemical resistance. Determination of alkali resistance

German Institute for Standardization, Glass material model

  • DIN 7079-1 Bb.1:1996 Pressure resistant circular glass-to-metal used sight glasses - Part 1: For holders with recess; design, glass in material No. 1.4462
  • DIN 52242:1996 Testing of glass and raw materials for the production of glass - Determination of chloride content
  • DIN EN 1051-1:2003-04 Glass in building - Glass blocks and glass pavers - Part 1: Definitions and description; German version EN 1051-1:2003
  • DIN EN 1424:2003 Road marking materials - Premix glass beads (includes Amendment A1:2003); German version EN 1424:1997 + A1:2003
  • DIN EN 61067-3-1:1998 Glass and glass polyester fibre woven tapes - Part 3: Specifications for individual materials; Sheet 1: Type 1, 2 and 3 tapes (IEC 61067-3-1:1995); German version EN 61067-3-1:1995
  • DIN EN 3861:2013-05 Aerospace series - Non-metallic materials - Glass transparencies - Material standard - Thermally tempered soda lime float glass; German and English version of EN 3861:2013
  • DIN EN 1051-2:2007-12 Glass in building - Glass blocks and glass pavers - Part 2: Evaluation of conformity/Product standard; German version EN 1051-2:2007
  • DIN 16944:1988 Glass fibre reinforced reaction resin moulding materials; test methods
  • DIN EN 3862:2013-04 Aerospace series - Non-metallic materials - Glass transparencies - Material standard - Chemically tempered soda lime float glass; German and English version EN 3862:2013
  • DIN ISO 3536:2001 Road vehicles - Safety glazing materials - Vocabulary (ISO 3536:1999)
  • DIN EN 60672-3:1999 Ceramic and glass-insulating materials - Part 3: Specifications for individual materials (IEC 60672-3:1997); German version EN 60672-3:1997
  • DIN 18174:1981 Cellular glass as insulating material for building construction; Insulating materials for thermal insulation
  • DIN 65060:1991 Aerospace; textile glass; textile glass filament rovings for reinforcement of plastics; technical specification
  • DIN 61854-2:1987-04 Textile glass; woven glass fabrics for plastics reinforcement; woven glass filament fabric and woven roving; types
  • DIN ISO 17449:2017 Road vehicles - Safety glazing materials - Test methods for properties of electrically heated glazing (ISO 17449:2015)
  • DIN ISO 3537:2018-02 Road vehicles - Safety glazing materials - Mechanical tests (ISO 3537:2015)
  • DIN 52354:2020 Headform impact test with deceleration measurement on glass and plastic safety panes for vehicle glazing
  • DIN 16948-2:1975 Glass fibre reinforced reaktion moulding materials in the moulded state; properties of special moulding materials
  • DIN 61854-2:1987 Textile glass; woven glass fabrics for plastics reinforcement; woven glass filament fabric and woven roving; types
  • DIN EN ISO 1172:2022-11 Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods (ISO/DIS 1172:2022); German and English version prEN ISO 1172:2022 / Note: Date of issu...
  • DIN ISO 3536:2017 Road vehicles - Safety glazing materials - Vocabulary (ISO 3536:2016)
  • DIN EN ISO 14692-1:2018-02 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1: Vocabulary, symbols, applications and materials (ISO 14692-1:2017); English version EN ISO 14692-1:2017
  • DIN 7863-3:2022 Elastomer glazing and panel gaskets for windows and claddings - Material requirements - Part 3: TPE glazing gaskets
  • DIN EN ISO 14692-1:2005 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1: Vocabulary, symbols, applications and materials (ISO 14692-1:2002); English version EN ISO 14692-1:2002
  • DIN ISO 15082:2018 Road vehicles - Tests for rigid plastic safety glazing materials (ISO 15082:2016)
  • DIN EN 1423:2013-03 Road marking materials - Drop on materials - Glass beads, antiskid aggregates and mixtures of the two; German version EN 1423:2012 + AC:2013

RU-GOST R, Glass material model

  • GOST 9553-1974 Silica glass and glass crystal materials. Determinationn of density
  • GOST R 56212-2014 Glassfibre. Silica fiber, materials and products based on it. Types. Brands
  • GOST 27380-1987 Section electrical insulating fiber-glass reinforced plastics. General specifications
  • GOST 10134.2-1982 Glass inorganic and glass-crystal materials. Method for determination of acid resistance
  • GOST 11103-1985 Inorganic glass and glass crystal materials. Method for the determination of thermal stability
  • GOST 11067-1985 Inorganic glass and glass-crystal materials. Method for the determination of impact strength
  • GOST 6943.12-1979 Glass textile products. Method of sagging determination
  • GOST 17478-1995 Moulding materials. Measuring glass-fibre-base laminate and granulated glass-fibre-base laminate. Specifications
  • GOST 17478-1972 Moulding material DSV. Specifications
  • GOST 27989-1988 Glass fillers for the domestic vacuum flasks. Types, parameters and sizes
  • GOST 6943.3-1979 Glass textile products. Method of abrasion resistance determination
  • GOST 6943.11-1993 Textile glass. Woven fabrics. Method for determination of conventional flexural stiffness. Fixed angle flexometer method
  • GOST R 53201-2008 Fiber-glass plastic pipes and fittings. Specifications
  • GOST 6943.11-1979 Glass textile products. Methods of flexible rigidity
  • GOST 10978-1983 Inorganic glass and glass-crystal materials. Determination of linear thermal expansion coefficient
  • GOST 10134.3-1982 Glass inorganic and glass-crystal materials. Method for determination of alkale resistance
  • GOST 9900-1985 Inorganic glass and glasscrystal materials. Methods for the determination of elastic module at cross static bending
  • GOST R 59574-2021 Bulk materials on the basis of the cellula glass. Specifications
  • GOST 6943.5-1979 Glass textile products. Method of filament rupture stress determination
  • GOST 6943.6-1979 Glass textile products. Methods of density and non-inflamability determination
  • GOST 6943.8-1979 Glass textile products. Method for determination of moisture and substances content ivaporated by tempering
  • GOST 29101-1991 Textile glass products. Packing, marking, transportation and storage
  • GOST R 56208-2014 Glassfibre. Silica fiber, materials and products based on it. Quality characteristics nomenclature
  • GOST R 56210-2014 Glassfibre. Quartz fiber, materials and products based on it. Grades and nomenclature of indices
  • GOST 6943.2-1979 Methods for determination of filament and fibre diameter
  • GOST 6943.9-1979 Glass textile products. Method of dinamic bending resistance determination
  • GOST 6943.18-1994 Textile glass. Woven fabrics. Non-woven cloth. Methods for determination of thikness
  • GOST 10134.1-1982 Glass inorganic and glass-crystal materials. Method for determination of water-resisting property at 98 °C

工业和信息化部, Glass material model

  • JC/T 941-2016 Pultruded glass fiber reinforced plastics hollow section for doors and windows
  • JC/T 2536-2019 Cement-water glass grouting material
  • JC/T 60004-2019 Regulations for the use of refractory materials for glass kilns

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Glass material model

  • GB/T 25041-2016 Glass fibre filter
  • GB/T 25041-2010 Glass fibre filter
  • GB/T 7134-2008 Poly(methyl methacrylate)cast sheets
  • GB/T 7134-1996 Poly (methyl methacrylate) cast sheets, rods and tubes
  • GB/T 8411.3-2009 Ceramic and glass insulating materials.Part 3:Specifications for individual materials
  • GB/T 7190.2-1997 Glass fiber reinforced plastic cooling tower--Part 2: Large glass fiber reinforced plastic cooling tower
  • GB/T 7190.2-2008 Glass fiber reinforced plastic cooling tower.Part2:Large glass fiber reinforced plastic cooling tower
  • GB/T 7190.1-1997 Glass fiber reinforced plastic cooling tower--Part 1: Middle-small type glass fiber reinforced plastic cooling tower
  • GB/T 7190.1-2008 Glass fiber reinforced plastic cooling tower.Part 1:Middle and small glass fiber reinforced plastic cooling tower
  • GB/T 29165.1-2022 Petroleum and natural gas industries—Glass-reinforced plastics (GRP) piping—Part 1:Vocabulary, symbols, applications and materials
  • GB/T 29165.1-2012 Petroleum and natural gas industries.Glass-reinforced plastics(GRP) piping.Part 1: Vocabulary, symbols, applications and materials

Underwriters Laboratories (UL), Glass material model

  • UL 972-1984 Burglary resisting glazing material
  • UL 972-1995 Burglary resisting glazing material
  • UL 972 BULLETIN-2014 UL Standard for Safety Burglary Resisting Glazing Material
  • UL 972 BULLETIN-2005 UL Standard for Safety Burglary Resisting Glazing Material
  • UL 972-2006 UL Standard for Safety Burglary Resisting Glazing Material (Sixth Edition)
  • UL 972-2002 UL Standard for Safety Burglary Resisting Glazing Material (Fifth Edition)

Group Standards of the People's Republic of China, Glass material model

Society of Automotive Engineers (SAE), Glass material model

American National Standards Institute （ANSI), Glass material model

  • ANSI/UL 972-2006 Burglary Resistant Glazing Material (Proposals dated 12/2/05)
  • ANSI/ABYC H-3-2008 Exterior Windows, Windshields, Hatches, Doors, Port Lights, and Glazing Materials

Professional Standard - Medicine, Glass material model

  • YY/T 0964-2014 Implants for surgery.Bioglass and glass ceramic biomaterials

VN-TCVN, Glass material model

  • TCVN 6758-2015 Road vehicles - Safety glazing and glazing material - Requirements and test methods in type approval
  • TCVN 6926-2001 Raw materials for producing construction glass.Dolomite
  • TCVN 6758-2000 Road vehicles.Safety glazing and glazing material.Requirements and test methods in type approval
  • TCVN 6300-1997 Raw material for producing of construction ceramics.Clay.Technical requirements

British Standards Institution (BSI), Glass material model

  • BS EN 61067-3-1:1995 Glass and glass polyester fibre woven tapes. Specifications for individual materials. Type 1, 2 and 3 tapes
  • BS EN 60672-3:1998 Ceramic and glass insulating materials. Specifications for individual materials
  • BS ISO 17449:2015 Road vehicles. Safety glazing materials. Test methods for properties of electrically heated glazing
  • BS EN 1424:1998 Road marking materials - Premix glass beads
  • BS ISO 3536:2016 Road vehicles. Safety glazing materials. Vocabulary
  • BS EN 3861:2013 Aerospace series. Non-metallic materials. Glass transparencies. Material standard. Thermally tempered soda lime float glass
  • BS EN 60672-2:2000 Ceramic and glass insulating materials. Methods of test
  • BS EN ISO 14692-1:2003 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Vocabulary, symbols, applications and materials
  • BS EN 14020-1:2002 Reinforcements - Specification for textile glass rovings - Designation
  • BS ISO 3537:2015 Road vehicles. Safety glazing materials. Mechanical tests
  • BS EN 60672-1:1996 Ceramic and glass insulating materials. Definitions and classification
  • BS ISO 11336-1:2012 Large yachts. Strength, weathertightness and watertightness of glazed openings. Design criteria, materials, framing and testing of independent glazed opening
  • BS EN ISO 14692-1:2017 Tracked Changes. Petroleum and natural gas industries. Glass-reinforced plastics (GRP) piping. Vocabulary, symbols, applications and materials
  • BS AU 182:1982 Specification for plastics safety glazing materials for use in road vehicles
  • BS ISO 22975-4:2023 Solar energy. Collector components and materials - Glazing material durability and performance
  • BS EN 14020-3:2002 Reinforcements - Specification for textile glass rovings - Specific requirements

TH-TISI, Glass material model

ES-UNE, Glass material model

  • UNE 43751:1978 ERRATUM GLASS RAW MATERIALS. GRANULOMETRIC TEST
  • UNE-EN 3861:2013 Aerospace series - Non-metallic materials - Glass transparencies - Material standard - Thermally tempered soda lime float glass (Endorsed by AENOR in March of 2013.)
  • UNE-EN 3862:2013 Aerospace series - Non-metallic materials - Glass transparencies - Material standard - Chemically tempered soda lime float glass (Endorsed by AENOR in March of 2013.)
  • UNE-EN ISO 14692-1:2017 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1: Vocabulary, symbols, applications and materials (ISO 14692-1:2017) (Endorsed by Asociación Española de Normalización in October of 2017.)
  • UNE-EN 1423:2013/AC:2013 Road marking materials - Drop on materials - Glass beads, antiskid aggregates and mixtures of the two

JSAE - Society of Automotive Engineers of Japan@ Inc., Glass material model

American Society for Testing and Materials (ASTM), Glass material model

  • ASTM F1538-03 Standard Specification for Glass and Glass Ceramic Biomaterials for Implantation
  • ASTM C800-05 Standard Specification for Glass Fiber Blanket Insulation (Aircraft Type)
  • ASTM C800-02e1 Standard Specification for Glass Fiber Blanket Insulation (Aircraft Type)
  • ASTM C800-02 Standard Specification for Glass Fiber Blanket Insulation (Aircraft Type)
  • ASTM C800-03 Standard Specification for Glass Fiber Blanket Insulation (Aircraft Type)
  • ASTM C800-03e2 Standard Specification for Glass Fiber Blanket Insulation (Aircraft Type)
  • ASTM C800-08 Standard Specification for Glass Fiber Blanket Insulation (Aircraft Type)
  • ASTM C800-14 Standard Specification for Fibrous Glass Blanket Insulation 40;Aircraft Type41;
  • ASTM E688-94(1999) Standard Test Methods for Waste Glass as a Raw Material for Glass Manufacturing
  • ASTM E688-94(2011) Standard Test Methods for Waste Glass as a Raw Material for Glass Manufacturing
  • ASTM F1538-03(2009) Standard Specification for Glass and Glass Ceramic Biomaterials for Implantation
  • ASTM F1538-94 Standard Specification for Glass and Glass Ceramic Biomaterials for Implantation
  • ASTM F1538-03e1 Standard Specification for Glass and Glass Ceramic Biomaterials for Implantation
  • ASTM F1538-03(2017) Standard Specification for Glass and Glass Ceramic Biomaterials for Implantation
  • ASTM C552-03 Standard Specification for Cellular Glass Thermal Insulation
  • ASTM C552-12b Standard Specification for Cellular Glass Thermal Insulation
  • ASTM C552-13 Standard Specification for Cellular Glass Thermal Insulation
  • ASTM D879-62 Specification for Communication and Signal Pin-Type Lime-Glass Insulators
  • ASTM D87-87(1999) Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
  • ASTM C552-00e1 Standard Specification for Cellular Glass Thermal Insulation
  • ASTM C552-00 Standard Specification for Cellular Glass Thermal Insulation
  • ASTM C552-12a Standard Specification for Cellular Glass Thermal Insulation
  • ASTM C552-88 Standard Specification for Cellular Glass Thermal Insulation
  • ASTM C552-21 Standard Specification for Cellular Glass Thermal Insulation
  • ASTM C552-21a Standard Specification for Cellular Glass Thermal Insulation
  • ASTM C552-22 Standard Specification for Cellular Glass Thermal Insulation
  • ASTM C552-17 Standard Specification for Cellular Glass Thermal Insulation
  • ASTM C552-15 Standard Specification for Cellular Glass Thermal Insulation
  • ASTM C552-12 Standard Specification for Cellular Glass Thermal Insulation
  • ASTM C552-14 Standard Specification for Cellular Glass Thermal Insulation
  • ASTM C552-16 Standard Specification for Cellular Glass Thermal Insulation
  • ASTM C552-16a Standard Specification for Cellular Glass Thermal Insulation
  • ASTM C1294-07(2011) Standard Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials
  • ASTM C552-07 Standard Specification for Cellular Glass Thermal Insulation
  • ASTM C1559-15(2021) Standard Test Method for Determining Wicking of Fibrous Glass Blanket Insulation (Aircraft Type)
  • ASTM C155-97(2022) Standard Classification of Insulating Firebrick
  • ASTM C1559-15 Standard Test Method for Determining Wicking of Fibrous Glass Blanket Insulation (Aircraft Type)
  • ASTM D3917-15 Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes
  • ASTM D3917-15e1 Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes
  • ASTM D2291/D2291M-22 Standard Practice for Fabrication of Ring Test Specimens for Glass-Resin Composites
  • ASTM D2291/D2291M-16 Standard Practice for Fabrication of Ring Test Specimens for Glass-Resin Composites
  • ASTM C1294-01 Standard Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials
  • ASTM C1294-95 Standard Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials
  • ASTM C1071-19 Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material)
  • ASTM F1233-98(2004) Standard Test Method for Security Glazing Materials And Systems
  • ASTM C1355/C1355M-96(2001) Standard Specification for Glass Fiber Reinforced Gypsum Composites
  • ASTM F1233-98 Standard Test Method for Security Glazing Materials And Systems
  • ASTM F1233-08 Standard Test Method for Security Glazing Materials And Systems
  • ASTM C1355/C1355M-96 Standard Specification for Glass Fiber Reinforced Gypsum Composites
  • ASTM F1233-21 Standard Test Method for Security Glazing Materials And Systems
  • ASTM F1233-08(2019) Standard Test Method for Security Glazing Materials And Systems
  • ASTM F1233-08(2013) Standard Test Method for Security Glazing Materials And Systems
  • ASTM C1355/C1355M-96(2020) Standard Specification for Glass Fiber Reinforced Gypsum Composites
  • ASTM C1071-98 Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material)
  • ASTM C1071-00 Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material)
  • ASTM C1071-05 Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material)
  • ASTM C1071-16 Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material)
  • ASTM C1071-05e1 Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material)
  • ASTM D3917-96(2002)e1 Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes
  • ASTM D3917-96 Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes
  • ASTM D3917-08 Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes
  • ASTM C1294-20 Standard Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials

AT-ON, Glass material model

PL-PKN, Glass material model

European Committee for Standardization (CEN), Glass material model

  • EN 1424:1997/prA1:2002 Amd PRA1 Road Marking Materials - Premix Glass Beads
  • EN 3861:2013 Aerospace series - Non-metallic materials - Glass transparencies - Material standard - Thermally tempered soda lime float glass
  • EN 3862:2013 Aerospace series - Non-metallic materials - Glass transparencies - Material standard - Chemically tempered soda lime float glass
  • HD 426.3 S1-1987 Specification for ceramic and glass insulating materials; part 3: individual materials
  • EN ISO 14692-1:2017 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1: Vocabulary@ symbols@ applications and materials
  • EN 1424:1997/A1:1997 Road Marking Materials - Premix Glass Beads Ratified European Text
  • prEN 61067-3-1-1992 Specification for glass and glass polyester fibre woven tapes for electrical purposes; part 3: specifications for individual materials; sheet 1: specifications for type 1, 2 and 3 tapes
  • EN 1424:1997 Road Marking Materials - Premix Glass Beads (Incorporates Amendment A1: 2003)
  • EN 14118-1:2003 Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 1: Designation

未注明发布机构, Glass material model

BE-NBN, Glass material model

CZ-CSN, Glass material model

Professional Standard - Chemical Industry, Glass material model

SE-SIS, Glass material model

Professional Standard - Machinery, Glass material model

  • JB/T 6819.7-1993 Instrument material terminology - Optical material and special glass
  • JB/T 5890-1991 Performance and test method of glass materials for insulators

Lithuanian Standards Office , Glass material model

  • LST EN 3861-2013 Aerospace series - Non-metallic materials - Glass transparencies - Material standard - Thermally tempered soda lime float glass
  • LST EN 1424-2001 Road marking materials - Premix glass beads
  • LST EN 1424-2001/A1-2003 Road marking materials - Premix glass beads
  • LST EN 3862-2013 Aerospace series - Non-metallic materials - Glass transparencies - Material standard - Chemically tempered soda lime float glass
  • LST EN 1423-2012 Road marking materials - Drop on materials - Glass beads, antiskid aggregates and mixtures of the two
  • LST EN 1423-2012/AC-2013 Road marking materials - Drop on materials - Glass beads, antiskid aggregates and mixtures of the two

Danish Standards Foundation, Glass material model

  • DS/EN 3861:2013 Aerospace series - Non-metallic materials - Glass transparencies - Material standard - Thermally tempered soda lime float glass
  • DS/EN 1424/A1:2003 Road marking materials - Premix glass beads
  • DS/EN 1424:1998 Road marking materials - Premix glass beads
  • DS/EN 3862:2013 Aerospace series - Non-metallic materials - Glass transparencies - Material standard - Chemically tempered soda lime float glass
  • DS/IEC 672-3:1986 Specification for ceramic and glass insulating materials. Part 3: Individual materials
  • DS/EN 2374:1991 Aerospace series. Glass fibre reinforced mouldings and sandwich composites. Production of test panels
  • DS/EN 60672-3:1998 Ceramic and glass-insulating materials - Part 3: Specifications for individual materials
  • DS/EN ISO 14692-1:2003 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1: Vocabulary, symbols, applications and materials
  • DS/EN 1423/AC:2013 Road marking materials - Drop on materials - Glass beads, antiskid aggregates and mixtures of the two
  • DS/EN 1423:2012 Road marking materials - Drop on materials - Glass beads, antiskid aggregates and mixtures of the two
  • DS/EN 2833-005:2013 Aerospace series - Glass fibre thermosetting preimpregnates - Technical specification - Part 005: Glass fabric/phenolic resin preimpregnate

Standard Association of Australia （SAA）, Glass material model

  • AS/NZS 2009:2006/AMD1:2007 Amendment No. 1 to AS/NZS 2009:2006 Glass beads for pavement marking materials
  • AS 2047.1:1996 Windows in buildings - Specification for materials and performance
  • AS/NZS 2208:1996 Safety glazing materials in buildings
  • AS 4049.1:2005 Paints and related materials - Pavement marking materials - Solvent-borne paint - For use with surface applied glass beads
  • AS/NZS 2208/AMD 1:1999 Safety glazing materials in buildings; Amendment No.1
  • AS ISO 14692.1:2022 Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping, Part 1: Vocabulary, symbols, applications and materials
  • AS 3571:1989 Glass filament reinforced thermosetting plastics (GRP) pipes - Polyester based - Water supply, sewerage and drainage applications
  • AS 4049.3/AMD 1:2006 Amendment No.1 to AS 4049.3-2005 Paints and related--Pavement marking materials Part 3: Waterborne paint--For use with surface applied glass beads
  • AS/NZS 2009:2006/AMD 1:2007 Amendment No. 1 to AS/NZS 2009:2006 Glass beads for pavement marking materials

International Organization for Standardization (ISO), Glass material model

  • ISO 20492-2:2008 Glass in buildings - Insulating glass - Part 2: Chemical fogging tests
  • ISO/CD 11983:2023 Road vehicles — Safety glazing materials — Test methods for electro-switchable glazing
  • ISO 17449:2015 Road vehicles - Safety glazing materials - Test methods for properties of electrically heated glazing
  • ISO 3536:1992 Road vehicles — Safety glazing materials — Vocabulary
  • ISO 3536:2016 Road vehicles - Safety glazing materials - Vocabulary
  • ISO/DIS 6041:2023 Road vehicles — Glazing Materials — Method for the determination of optical characteristics of glazing camera zones
  • ISO 15082:1999 Road vehicles - Tests for rigid plastic safety glazing materials
  • ISO 3268:1978 Plastics; Glass reinforced materials; Determination of tensile properties
  • ISO 8605:1989 Textile glass reinforced plastics; sheet moulding compound (SMC); basis for a specification
  • ISO 20492-1:2008 Glass in buildings - Insulating glass - Part 1: Durability of edge seals by climate tests
  • ISO 14692-1:2002 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1: Vocabulary, symbols, applications and materials
  • ISO 14692-1:2017 Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 1: Vocabulary, symbols, applications and materials
  • ISO/FDIS 11336-1 Large yachts — Strength, weathertightness and watertightness of glazed openings — Part 1: Design criteria, materials, framing and testing of independent glazed openings
  • ISO 3537:1999 Road vehicles - Safety glazing materials - Mechanical tests
  • ISO 3537:1993 Road vehicles; safety glazing materials; mechanical tests
  • ISO 3537:2015 Road vehicles - Safety glazing materials - Mechanical tests
  • ISO 11336-1:2023 Large yachts — Strength, weathertightness and watertightness of glazed openings — Part 1: Design criteria, materials, framing and testing of independent glazed openings

GM Europe, Glass material model

  • GME QK 001138-1988 Polyamid 66 mit Glasfasern und -kugeln Polyamide 66 with Glass Fibres and Glass Spheres English/German
  • GME TM 942500-2013 Compression Molded Composite Material for Formed Headliners, Substrate based on Glass Fibres
  • GME TM 942500-1996 Verbundwerkstoff, formgepre遲, f黵 Formhimmel, Tr鋑er auf Glasfaserbasis Compression Molded Composite Material for Formed Headliners, Substrate based on Glass Fibres English/German
  • GME QK 000508-2004 Polyurethane Elastomer with Glass Fibres and Minerals (English/German)

HU-MSZT, Glass material model

US-CPSC, Glass material model

SAE - SAE International, Glass material model

  • SAE J674-1983 Safety Glazing Materials - Motor Vehicles
  • SAE J674-1990 Safety Glazing Materials - Motor Vehicles@ Recommended Practice (November 1990)
  • SAE J674-2005 SAFETY GLAZING MATERIALS—MOTOR VEHICLES
  • SAE J674-2013 Safety Glazing Materials - Motor Vehicles and Motor Vehicle Equipment
  • SAE Z26.1 ADD A-1980 Safety Code for Safety Glazing Materials for Glazing Motor Vehicles Operating on Land Highways
  • SAE J1907-2021 Peel Adhesion Test for Glass to Elastomeric Material for Automotive Glass Encapsulation@ Recommended Practice
  • SAE Z26.1-1983 SAFETY GLAZING MATERIALS FOR GLAZING MOTOR VEHICLES OPERATING ON LAND HIGHWAYS - SAFETY CODE
  • SAE AMS3812C-2016 Rods@ Glass Fiber@ Polyester Resin@ Loaded Pultrusion

AENOR, Glass material model

  • UNE-EN 1424/A1:2003 Road marking materials - Premix glass beads
  • UNE-EN 1424:1998 ROAD MARKING MATERIALS. PREMIX GLASS BEADS.
  • UNE-EN 60672-3:1999 CERAMIC AND GLASS-INSULATING MATERIALS. PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS.
  • UNE 26499:2003 Road vehicles. Safety glazing materials. Mechanical tests.
  • UNE-EN 1423:2013 Road marking materials - Drop on materials - Glass beads, antiskid aggregates and mixtures of the two

GM North America, Glass material model

European Association of Aerospace Industries, Glass material model

  • AECMA PREN 3861-2001 Aerospace Series Non-Metallic Materials Glass Transparencies Material Standard Thermally Tempered Soda Lime Float Glass Edition P 1
  • AECMA PREN 3862-2001 Aerospace Series Non-Metallic Materials Glass Transparencies Material Standard Chemically Tempered Soda Lime Float Glass Edition P 1

ES-AENOR, Glass material model

NZ-SNZ, Glass material model

  • AS/NZS 2009:2006 Glass beads for pavement-marking materials (Incorporates Amendment No 1: December 2007)

International Electrotechnical Commission (IEC), Glass material model

  • IEC 61067-3-1:1995 Glass and glass polyester fibre woven tapes - Part 3: Specifications for individual materials - Sheet 1: Type 1, 2 and 3 tapes
  • IEC 60672-3:1997 Ceramic and glass-insulating materials - Part 3: Specifications for individual materials
  • IEC 60672-3:1984 Specification for ceramic and glass insulating materials. Part 3 : Individual materials

European Committee for Electrotechnical Standardization（CENELEC）, Glass material model

  • EN 61067-3-1:1995 Glass and Glass Polyester Fibre Woven Tapes Part 3: Specifications for Individual Materials Sheet 1: Type 1, 2 and 3 Tapes
  • HD 426.3 S1-1988 Specification for Ceramic and Glass Insulating Materials- Part 3: Individual Materials

国家市场监督管理总局、中国国家标准化管理委员会, Glass material model

RO-ASRO, Glass material model

Chongqing Provincial Standard of the People's Republic of China, Glass material model

KR-KS, Glass material model

Professional Standard - Traffic, Glass material model

  • JT/T 1035.2-2016 Glass beads for road retroreflective mateirals.Part 2: Glass beads for retroreflective sheeting
  • JT/T 1035.3-2016 Glass beads for road retroreflective mateirals.Part 3: Glass beads for retroreflective cloth

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Glass material model

  • PREN 3861-2001 Aerospace Series Non-Metallic Materials Glass Transparencies Material Standard Thermally Tempered Soda Lime Float Glass (Edition P 1)
  • PREN 3862-2001 Aerospace Series Non-Metallic Materials Glass Transparencies Material Standard Chemically Tempered Soda Lime Float Glass (Edition P 1)

YU-JUS, Glass material model

  • JUS N.A8.302-1990 Ceramic and glass insulating materials for electrical purposes. Requirements for individua! materials
  • JUS N.A8.301-1990 Ceramic andglass insulating materiats for electrical purposes. Methods of test
  • JUS N.A8.300-1990 Ceramic andglass insulating materials for electrical purposes. Definitions and ctassification

NO-SN, Glass material model

  • NS 9512-1985 Plastics - Glass reinforced materials - Determination of tensile properties

SG-SPRING SG, Glass material model

  • SS 309-1985 Method For The Determination Of Shading Coefficients Of Glazing Materials

IT-UNI, Glass material model

  • UNI 6534-1974 Glazing and fixing of glass for buildings. Design, materials and laying.
  • UNI EN 61-1978 Glass reinforced plastics. Determination of tensile properties.

Military Standard of the People's Republic of China-General Armament Department, Glass material model

  • GJB 9791-2020 Specification for chalcogenide glass materials for use in optical systems
  • GJB 2730-1996 Material specification for glass-ceramic missile radomes
  • GJB 2730A-2021 Material specification for glass-ceramic missile radomes
  • GJB 1039-1990 Injection molding epoxy glass cloth reinforced plastic

Indonesia Standards, Glass material model

  • SNI 04-6970.3-2003 Ceramic and glass-insulating materials. Part 3: Specification for individual materials

American Water Works Association (AWWA), Glass material model

  • AWWA D120-2009 Thermosetting Fiberglass-Reinforced Plastic Tanks
  • AWWA F101-2002 Contact-Molded, Fiberglass-Reinforced Plastic Wash Water Troughs and Launders

Aerospace, Security and Defence Industries Association of Europe (ASD), Glass material model

  • ASD-STAN PREN 3861-2001 Aerospace Series Non-Metallic Materials Glass Transparencies Material Standard Thermally Tempered Soda Lime Float Glass (Edition P 1)
  • ASD-STAN PREN 3862-2001 Aerospace Series Non-Metallic Materials Glass Transparencies Material Standard Chemically Tempered Soda Lime Float Glass (Edition P 1)

Electronic Components, Assemblies and Materials Association, Glass material model

IN-BIS, Glass material model

ECIA - Electronic Components Industry Association, Glass material model

  • RS-505-1983 Packing for Return CRT Glass Component Packaging Material

United States Navy, Glass material model

Guangdong Provincial Standard of the People's Republic of China, Glass material model

FI-SFS, Glass material model

Professional Standard - Coal, Glass material model

  • MT 558.3-2005 Plastic pipes in coal mining Part 3: Fibre-reinforced plastic pipes

国家发展和改革委员会, Glass material model

  • MT 958.3-2005 Plastic pipes for underground coal mines Part 3: FRP pipes

Defense Logistics Agency, Glass material model

  • DLA MIL-PRF-19978/2 E-2009 CAPACITORS, FIXED, PLASTIC (OR PAPER-PLASTIC) DIELECTRIC, (HERMETICALLY SEALED IN CERAMIC OR GLASS CASES), STYLE CQ20

International Federation of Trucks and Engines, Glass material model

住房和城乡建设部, Glass material model

  • JG/T 517-2017 Hollow glass microsphere thermal insulation material for engineering use

机械电子工业部, Glass material model

  • JB 5890-1991 Properties and testing methods of glass materials for insulators

PT-IPQ, Glass material model

  • NP 2216-1988 Textile glass reinforced plastics Determination of loss in mass by calcination

Professional Standard - Aviation, Glass material model

  • HB 5011-1994 Low-pressure formed glass fiber reinforced plastic aerospace parts

  glass material, glass material, Glass material standard, glass impregnated material, Glass material simulation, glass expansion material, glass thermoelectric material, glass raw material, Glass material model, dma glass material, Glass model, k9 glass model, glass material, new glass material, material glass, Magnetic Material Model, glass raw material, Material model, Glass Material Luminosity, Glass k9 model.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved