ZH
RU
ES

Deuterium content detection technology

Deuterium content detection technology, Total:498 items.

In the international standard classification, Deuterium content detection technology involves: Farming and forestry, Test conditions and procedures in general, Road engineering, Linear and angular measurements, Products of the chemical industry, Natural gas, Law. Administration, Measurement of volume, mass, density, viscosity, Astronomy. Geodesy. Geography, Water quality, Wastes, Photography, Ferrous metals, Equipment for petroleum and natural gas industries, Services, Geology. Meteorology. Hydrology, Optics and optical measurements, Road vehicles in general, Agricultural machines, implements and equipment, Earthworks. Excavations. Foundation construction. Underground works, Fruits. Vegetables, Materials for the reinforcement of composites, Animal feeding stuffs, Hydraulic energy engineering, Tunnel construction, Medical equipment, Protection against fire, Veterinary medicine, Information sciences. Publishing, Construction industry, Petroleum, petroleum products and natural gas handling equipment, Testing of metals, Milk and milk products, Iron and steel products, Medical sciences and health care facilities in general, Solar energy engineering, Biology. Botany. Zoology, CIVIL ENGINEERING, Mining equipment, Packaging machinery, Applications of information technology, Vocabularies, Power transmission and distribution networks, Nuclear energy engineering, Fertilizers, Paper and board, Diagnostic, maintenance and test equipment, Raw materials for rubber and plastics, Non-ferrous metals, Aerospace electric equipment and systems, Energy and heat transfer engineering in general, Hydraulic construction, Civil engineering in general, Electrical engineering in general, Physics. Chemistry, Document imaging applications, Open systems interconnection (OSI), Construction materials, Structures of buildings, Occupational safety. Industrial hygiene, Electrical and electronic testing, Welding, brazing and soldering, Radiocommunications, Quality, Bridge construction, Environmental protection, Metrology and measurement in general, Analytical chemistry, Spices and condiments. Food additives, Soil quality. Pedology, Non-destructive testing, Pharmaceutics, Physical planning. Town planning, Software development and system documentation, Edible oils and fats. Oilseeds, Plastics, Character sets and information coding, Jewellery, Air quality, Rubber, Fuels, Coals, Powder metallurgy, Construction of waterways and ports, Ceramics, Laboratory medicine, Extraction and processing of petroleum and natural gas, Dentistry, Leather technology, Railway rolling stock, Shipbuilding and marine structures in general, Petroleum products in general, Company organization and management, Internal combustion engines for road vehicles, Terminology (principles and coordination), Electromechanical components for electronic and telecommunications equipment, Telecommunication systems.

Liaoning Provincial Standard of the People's Republic of China, Deuterium content detection technology

DB21/T 3239-2020 Technical specification for rapid detection of humic acid content
DB21/T 2778-2017 Technical specification for detection of SBS modifier content in road modified asphalt
DB21/T 3762-2023 Technical regulations for quality inspection of hydraulic tunnels
DB21/T 3005-2018 Technical regulations for bovine frozen semen quality testing
DB21/T 3179-2019 Technical specification for quality inspection of bridge concrete based on acoustic tomography

HU-MSZT, Deuterium content detection technology

Professional Standard - Construction Industry, Deuterium content detection technology

JGJ/T 322-2013 Technical specification for test of chloride ion content in concrete
JGJ/T 182-2009 Technical specification for nondestructive testing of rock bolt system
JGJ/T 277-2012 Technical specification for inspecting the defects of exterior walls cement coating of building with infrared thermography method

Gansu Provincial Standard of the People's Republic of China, Deuterium content detection technology

DB62/T 4344-2021 Technical specification for detection of SBS modifier content in road modified asphalt
DB62/T 4343-2021 Technical specification for dynamic modulus testing of roadbed compaction quality

RU-GOST R, Deuterium content detection technology

GOST 22601-1977 Control bars. Specifications
GOST R ISO 8891-2005 Dental casting alloys with noble metal content of at least 25 % but less than 75 %. Technical requirements. Test methods
GOST ISO/TR 14735-2015 Cosmetics. Analytical methods. Technical guidance document for minimizing and determining N-nitrosamines

Jiangsu Provincial Standard of the People's Republic of China, Deuterium content detection technology

DB32/T 3566-2019 Technical specification for detection of SBS modifier content in asphalt pavement modified asphalt
DB32/T 3166.1-2016 Integrity Specifications for Quality and Technology Supervision, Inspection and Testing Part 1: Product Quality Inspection and Testing
DB32/T 3166.2-2016 Integrity Specifications for Quality and Technical Supervision, Inspection and Testing Part 2: Inspection and Testing of Special Equipment
DB32/T 4303-2022 Technical Management Regulations for Quality Inspection of Construction Projects (Revised)
DB32/T 3762.20-2022 Technical Specifications for Novel Coronavirus Detection Part 20: Quality Control of Nucleic Acid Fluorescence PCR Testing
DB32/T 3693-2019 Technical specification for electrochemical non-destructive quantitative detection of steel corrosion in concrete
DB32/T 3762.11-2020 Novel Coronavirus Detection Technical Specifications Part 11: Whole Genome High-throughput Sequencing
DB32/T 4115-2021 Technical specifications for quality inspection of bored piles and underground diaphragm walls
DB32/T 3762.10-2020 Novel Coronavirus Detection Technical Specification Part 10: Trace Serum Neutralization Test

PL-PKN, Deuterium content detection technology

PN C04288-12-1987 Technical fats Methods of testing Determination of water content
PN C04288-13-1987 Technical fats Methods of testing Determination of sulphur content
PN C04288-16-1989 Technical fats Methods of testing Determination of phosphorus content
PN C84002-17-1986 Sodium hydroxide technical Determination of calcium and magnesium content Complexometric methods
PN C04288-14-1987 Technical fats Methods of testing Determination of protein content
PN C04288-04-1987 Technical fats Methods of testing Determination of fatty matter content
PN C84002-09-1986 Sodium hydroxide technical Determination of iron content Photocolorimetric method
PN C84002-11-1988 Sodium hydroxide technical Determination of sodium sulphate content
PN C84039-07-1987 Potassium hydroxide technical Determination of iron content Photocolorimetric method
PN C84039-09-1988 Potassium hydroxide technical Determination of heavy metals content
PN C84039-10-1988 Potassium hydroxide technical Determination of chlorides content
PN C84039-11-1988 Potassium hydroxide technical Determination of sulphates content
PN C84002-18-1986 Sodium hydroxide technical Determination of mercury content Photocolorimetric method
PN C84039-12-1988 Potassium hydroxide technical Determination of chlorates content
PN C84002-21-1986 Sodium hydroxide technical Determination of sodium chlorate content Photocolorimetric method
PN C84002-06-1986 Sodium hydroxide technical Determination of silica content Photocolorimetric method
PN C84002-02-1988 Sodium hydroxide technical Determination of sodium hydroxide and sodium carbonate content
PN C84039-06-1987 Potassium hydroxide technical Determination of potassium hydroxide and potassium carbonate content

Chongqing Provincial Standard of the People's Republic of China, Deuterium content detection technology

DB50/T 961-2019 Shale Gas Content Testing Technical Specifications
DB50/T 24-2011 Technical regulations for quality inspection of building fire protection facilities

Yunnan Provincial Standard of the People's Republic of China, Deuterium content detection technology

DB53/T 663-2014 Seedling quality inspection technical regulations
DB53/T 1145-2023 Technical procedures for high-throughput identification and detection of cut flower lily virus species

CN-STDBOOK, Deuterium content detection technology

图书 A-4686 Mechanical Product Quality Inspection Technology
图书 A-4619 Material quality inspection and analysis technology
图书 a-4407 Gamma knife quality control detection technology
图书 a-4570 Quality control detection technology of medical linear accelerator
图书 a-4383 Top-down uncertainty assessment of quality control technology in inspection and testing laboratories
图书 A-4337 Quality control detection technology for medical magnetic resonance imaging equipment
图书 A-4692 The principle and detection technology of metering instruments for operating passenger cars
图书 a-4541 Helical tomotherapy system (TOMO) quality control testing technology

Group Standards of the People's Republic of China, Deuterium content detection technology

T/EPIAJL 1-2018 Technical specifications for detection of hydrogen content in the inner cooling water tank of water inner cooling generators and hydrogen leakage in the inner cooling water system
T/GDFS 15-2022 Technical Regulations for Quality Inspection of Wuzhi Peach
T/NJ 1323-2022 Technical code for rapid detection oftrash percentage and moisture regain of seed cotton
T/CECS 596-2019 Technical specification for testing of borehole of cast-in-place piles
T/NTRPTA 0062-2021 Technical regulations for quality inspection of quick-frozen edamame kernels
T/CSPSTC 55-2020 Technical code for quality undestructive detecting of tunnel lining
T/QGCML 1211-2023 Technical specifications for quality inspection of real estate surveying and mapping results
T/GDFS 14-2022 Technical Regulations for Quality Inspection of Mujiang Yeke Sweet Tea
T/CEC 596-2022 Quantum IPSec VPN equipment function and detection technical specifications
T/QGCML 1618-2023 Technical Specifications for Internet of Vehicles Service Quality Detection System
T/CIQA 27-2021 Guidelines for Service Quality Evaluation of Inspection and Testing Public Technology Service Platforms
T/CPSS 1009-2021 Technical specification for field test of power quality online monitoring devices
T/JSEE 004-2018 Testing specification for metering performance of merging unit with analog input
T/ZJCIA 002-2021 Quality grade and detection technology of nuts in Carya cathayensis
T/JAASS 39-2022 Technical specification on quality detection of animal-derived manure of high quality
T/CHTS 10056-2022 Technical Code for Nondestructive Testing of Highway Tunnel Lining
T/CECS 1382-2023
T/SZGIA 3-2018 The Standard of High-throughout Sequencing in Preimplantation Genetic Screening techniques
T/HNCAA 033-2022 Standard for testing soil subgrade resilience modulus by falling ball method
T/CEC 279-2019 Technical specification for detection of hydrogen leakage in generator stator cooling water
T/HXCY 003-2021 Code of Practice for Determination of Cellulose Content of Saccharum arundinaceum Based on the Method of Near Infrared Spectrum (NIRS)
T/ZSM 0011-2022 Technical requirements for remote intelligent testing-measuring platform data Interface
T/YNBX 064-2022 Technical Regulations for Quality Inspection of Wheat Retail Propagation Seed Purchasing
T/SCAS 03-2022 Technical specification for testing the quality of tunnel lining concrete by acoustic vibration method
T/ZZXJX 127-2022 Technical regulations for testing the quality of concrete structure engineering by radar method
T/QGCML 043-2020 Constant temperature and humidity automatic weighing system technical requirements and testing methods
T/ZZXJX 123-2022 Technical specification for quality inspection of concrete crack grouting filling and repairing
T/CAS 601-2022 Technical specifications for research on safety testing indicators in the quality of traditional Chinese medicine injections
T/CECS 683-2020 Technical specification for sleeve grouting quality inspection of prefabricated concrete structures
T/CVMA 111.2-2023 Technical specification for physical examination of canine and feline—Part 2: Measurement of non-invasive arterial blood pressure
T/CEC 563-2021 Technical specifications for quality inspection of concrete protective caps for foundation bolts of transmission towers
T/SZAS 34-2021 Application specification of Duchenne / Becker muscular dystrophy detection based on high-throughput sequencing technology
T/CSES 43-2021 Technical specifications for online monitoring equipment of Biochemical Oxygen Demand based on in situ biofilm
T/HNCAA 041-2023 Technical Specification for Building Waste Recycled Materials Testing in Subgrade Construction
T/WHHLW 11-2023 Oil and gas wellhead production and gas tree detection technology methods and quality classification
T/CAME 9-2019 Specification for testing of quality control in radiation dose verification system of medical linear accelerator (LA)
T/CEC 5001-2016 Technical regulations for testing sand and gravel compacted mass density bucket method in hydropower and water conservancy projects
T/GDSZ 001-2023 Technical specification for quality detecting and defect strengthening of connecting nodes of prefabricated municipal bridge
T/SHZSAQS 015-2020 Technical regulations for efficient detection of SNP sites of Fecb gene in sheep with multiple fetuses by real-time fluorescent quantitative PCR
T/SXQCA 001-2022 Technical specification for protective equipment and installation quality inspection of civil air defense engineering of urban rail transit

Professional Standard - Surveying and Mapping, Deuterium content detection technology

CH/T 1028-2012 Technical rules for quality inspection and acceptance of deformation surveying results
CH/T 1033-2014 Technical regulations for quality inspection of pipeline measurement results
CH/T 1021-2010 Technical specifications for quality inspection and acceptance of vertical control surveying products
CH/T 1024-2011 Technical rules for quality inspection and acceptance of image control surveying products
CH/T 1022-2010 Technical regulations for quality inspection of plane control measurement results
CH/T 1034-2014 Technical regulations for quality inspection of surveying, surveying and mapping results
CH/T 1039-2018 Technical regulations for inspection of aerial triangulation results

British Standards Institution (BSI), Deuterium content detection technology

BS ISO 10348:1996 Photography - Processing wastes - Determination of silver content
BS ISO 10348:1993 Photography - Processing wastes - Determination of silver content
BS ISO 8300:2013 Nuclear fuel technology. Determination of plutonium content in plutonium dioxide of nuclear grade quality. Gravimetric method
BS EN ISO 14253-5:2015 Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment. Uncertainty in verification testing of indicating measuring instruments
BS ISO 17278:2020 Rubber, raw natural. Determination of the gel content of technically specified rubber (TSR)
19/30388674 DC BS ISO 17278. Rubber, raw natural. Determination of the gel content of technically specified rubber (TSR)
BS EN ISO 14253-2:2011 Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment. Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
PD ISO/TS 23690:2023 Nanotechnologies. Multiwall carbon nanotubes. Determination of carbon impurity content by thermogravimetric analysis
BS 7164-22.2:1992 Chemical tests for raw and vulcanized rubber - Determination of chlorine content - Oxygen flask combustion technique for determination of bromine and chlorine
BS EN ISO 10360-4:2001 Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). CMMs used in scanning measuring mode
BS EN ISO 14253-3:2011 Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment. Guidelines for achieving agreements on measurement uncertainty statements
BS ISO 14869-3:2017 Soil quality. Dissolution for the determination of total element content. Dissolution with hydrofluoric, hydrochloric and nitric acids using pressurised microwave technique
BS ISO 16145-4:2013 Ships and marine technology. Protective coatings and inspection method. Automated measuring method for the total amount of water-soluble salts
BS EN ISO 10360-12:2016 Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS). Articulated arm coordinate measurement machines (CMM)
BS EN ISO 10360-7:2011 Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). CMMs equipped with imaging probing systems
BS EN ISO 10360-1:2001 Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). Vocabulary
23/30457108 DC BS ISO 7383. Fine bubble technology. Evaluation method for determining oxygen content in fine bubble dispersions in water
BS EN 1007-1:2002 Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Determination of size content

CZ-CSN, Deuterium content detection technology

CSN 42 0533-1984 Chemical analysis of technical iron. Determination of the antimony content
CSN 70 4241-1967 Glass apparatus for the determination of carbon in technical iron
CSN 65 2082-1984 Sodium cnrbonate technicnl Pliotocolorimntric m;:thod of iron contont dcturmination
CSN 65 2102-1985 Potassium hydroxide technical Photocolorimetric method for determination of iron content
CSN 65 2085-1984 Sodium carbonate technical Gravimetric method of sulphate content determination
CSN 65 2081-1984 Sodium carbonate technical Titrimetric method of chlorides content determination
CSN 65 2101-1985 Potassium hydroxide technical. Determination of potassium hydroxide content. Total alkalinity and potassium carbonate content. Titrimetrical method
CSN 65 2103-1985 Potassium hydroxide technical Complexometric deterraination of the sum of calcium and magnesium contents

PT-IPQ, Deuterium content detection technology

NP 1923-1987
NP 637-1987
NP 702-1991 Yogurt Determination of fat content. Ròse-Gottlieb method. Reference method
NP 3104-1985

Professional Standard - Petroleum, Deuterium content detection technology

SY/T 5378-1991 Specifications for Drilling Fluid Sand Content Tester
SY 5378-2009 Specifications of drilling fluid sand content logging tool
SY/T 6880-2012 Technical code for spectrometric detection of steel material in high hydrogen sulfide gas field
SY 6880-2012 Technical specifications for spectral detection of steel materials in high hydrogen sulfide gas fields
SY 6970-2013 Technical specifications for on-line corrosion detection of surface gathering and transportation systems in high hydrogen sulfide gas fields

国家能源局, Deuterium content detection technology

SY/T 5378-2009 Technical specifications of drilling fluid sand content measuring instrument
SY/T 6880-2021 Technical specifications for spectral detection of steel materials in gas fields with high hydrogen sulfide content
NB/T 10185-2019 Technical specifications for performance testing and quality assessment of key equipment used in grid-connected photovoltaic power stations

Professional Standard - Agriculture, Deuterium content detection technology

NY/T 1674-2008 Detection procedures for quality evaluation in embryos of bovine and ovine

Professional Standard - Goods and Materials, Deuterium content detection technology

WB/T 1030-2006 Standard for paving technology and quality inspection of wooden flooring

Guangxi Provincial Standard of the People's Republic of China, Deuterium content detection technology

DB45/T 1682-2018 Technical regulations for quality inspection of buffalo embryos
DB45/T 2121-2020 Tunnel Engineering Quality and Environmental Testing Technical Specifications

Hebei Provincial Standard of the People's Republic of China, Deuterium content detection technology

DB13/T 5380-2021 Pump station engineering quality inspection technical regulations
DB1304/T 440-2023 Technical regulations for quantitative fluorescence detection of calf diarrhea pathogens
DB13/T 5147-2019 Technical Requirements for Detection of Ozone Release from Organic Waste Gas Purification Devices
DB13/T 2480-2017 Technical specification for testing the quality of dense grouting in bridge prestressed tunnels

水利部, Deuterium content detection technology

SL/T 734-2016 Technical regulations for quality inspection of water conservancy projects

Shaanxi Provincial Standard of the People's Republic of China, Deuterium content detection technology

DB61/T 1689-2023 Technical Specifications for Classroom Lighting Quality Inspection

Japanese Industrial Standards Committee (JISC), Deuterium content detection technology

JIS D 1050:1998 Road vehicles -- Techniques of measurement in impact tests -- Instrumentation
JIS K 0400-61-20:2001 Water quality -- Determination of arsenic -- Atomic absorption spectrometric method (hydride technique)
JIS Z 2354:1992 Method for measurement of ultrasonic attenuation coefficient of solid by pulse echo technique
JIS B 0641-1:2001 Geometrical Product Specifications (GPS) -- Inspection by measurement of workpieces and measuring equipment -- Part 1: Decision rules for proving conformance or nonconformance with specifications
JIS B 7440-5:2004 Geometrical Product Specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 5: CMMs using multiple-stylus probing systems

Professional Standard - Electricity, Deuterium content detection technology

DL/T 1862-2018 Power quality monitoring terminal detection technical specification
DL/T 2419-2021 Technical specification for flue gas oxygen content measuring device in thermal power plant
DL/T 821-2017 Radiographic Inspection Technology and Quality Grading of Metal Fusion Welded Butt Joints
DL/T 2435.4-2021 Technical Regulations for Airborne LiDAR Measurement of Overhead Transmission Lines Part 4: Operation and Maintenance Inspection

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Deuterium content detection technology

GB/T 24762-2009 Geometrical Product Specifications(GPS).Acceptance test and reverification test for video measuring machine
GB/T 16857.1-2002 Geometrical product specification(GPS)-Acceptance and reverification tests for coordinate measuring machines--Part 1: Vocabulary
GB/T 16857.2-2006 Geometrical Product Specifications(GPS). Acceptance and reverification tests for coordinate measuring machines(CMM). Part 2:CMMs used for measuring size
GB/T 38457-2020 Specification of packaging quality inspector for bottled liquid products
GB/T 16857.4-2003 Geometrical product specifications(GPS)--Acceptance and reverification tests for coordinate measuring machines(CMM)--Part 4: CMMs used in scanning measuring mode
GB/T 16857.5-2004 Geometrical Product Specifications(GPS)-Acceptance and reverification tests for coordinate measuring machines(CMM)-Part 5:CMMs using multiple-stylus probing systems
GB/T 17473.1-2008 Test method of precious metals pastes used for microelectronics.Determination of solids content
GB/T 16857.12-2022 Geometrical product specifications (GPS)—Acceptance and reverification tests for coordinate measuring systems (CMS)—Part 12: Articulated arm coordinate measurement machines (CMM)
GB/T 8988-1988 Micrographics--Manufacture of test target for inspecting the quality of micrography of technical drawings
GB/T 17473.1-1998 Test methods of precious metal pastes used for thick film microelectronics--Determination of solids content
GB/T 16857.9-2022 Geometrical product specifications (GPS)—Acceptance and reverification tests for coordinate measuring systems (CMS)—Part 9:CMMs with multiple probing systems
GB/T 16857.7-2022 Geometrical product specifications (GPS)—Acceptance and reverification tests for coordinate measuring systems (CMS)—Part 7: CMMs equipped with imaging probing systems
GB/T 16857.10-2022 Acceptance testing and re-inspection testing of product geometry specification (GPS) coordinate measuring system (CMS) Part 10: Laser tracker
GB/T 16857.8-2022 Geometrical product specifications (GPS)—Acceptance and reverification tests for coordinate measuring systems (CMS)—Part 8: CMMs with optical distance sensors
GB/T 16857.3-2009 Geometrical Product Specifications(GPS).Acceptance and reverification tests for coordinate measuring machines(CMM).Part 3:CMMs with the axis of a rotary table as the fourth axis
GB/T 35395-2017 General technical specification for mobile testing laboratory of quality and safety of agricultural products
GB/T 18779.2-2004 Geometrical Product Specifications(GPS)-Inspection by measurement of workpieses and measuring equipment-Part 2:Guide to the estimation of uncertainty in GPS measurement,in calibration of measuring equipment and in product verification
GB/T 1958-2004 Geometrical Product Specifications(GPS)Geometrical tolerance Verification prescription
GB/T 17286.3-1998 Liquid hydrocarbons--Dynamic measurement--Proving systems for volumetric meters--Part 3: Pulse interpolation techniques
GB/T 17286.3-2010 Liquid hydrocarbons.Dynamic measurement.Proving system for volumetric meters.Part 3:Pulse interpolation techniques
GB/T 8990-1988 Micrographics--Reflectance test target used in the test target for inspecting the quality of micrography of technical drawing
GB 8990-1988 Micrographics—Reflectance test target used in the test target for inspecting the quality of micrography of technical drawing
GB/T 18779.1-2002 Geometrical product specifications (GPS)-Inspection by measurement of workpieces and measuring equipment--Part 1:Decision rules for proving conformance or non-conformance with specifications
GB 50618-2011 Testing technology management code for building and municipal infrastructure engineering quality
GB/T 16857.6-2006 Geometrical Product Specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). Part 6: Estimation of errors in computing Gaussian associated features
GB/T 38261-2019(英文版) Nanotechnology—Determination of silver contents in biological samples-Inductively coupled plasma mass spectrometry
GB/T 18779.2-2023 Geometric Product Specification (GPS) Measurement Inspection of Workpieces and Measuring Equipment Part 2: Guidance for the Evaluation of Measurement Uncertainty in GPS Measurements, Measurement Equipment Calibration, and Product Verification
GB/T 18779.3-2023 Geometric Product Specification (GPS) Measurement Inspection of Workpieces and Measuring Equipment Part 3: Guidance on reaching a consensus on the expression of measurement uncertainty
GB/T 18779.3-2009 Geometric product specification (GPS) Measurement inspection of workpieces and measuring equipment Part 3: Guidance on reaching a consensus on the expression of measurement uncertainty

Inner Mongolia Provincial Standard of the People's Republic of China, Deuterium content detection technology

DB15/T 2613-2022 Technical regulations for lightweight testing of highway pavements

VN-TCVN, Deuterium content detection technology

TCVN 3797-1983 Sodium hydroxide technical.Photometric method of test for iron content
TCVN 3803-1983 Sodium hydroxide technical.Photometric method of test for aluminium content

CU-NC, Deuterium content detection technology

NC 24-42-1985 Inorganic Chemical products. Technical Hydrochloric Acid. Determination of Iron Content
NC 24-49-1985 Inorganic Chemical Products. Technical Chlorhydric Acid. Determination of Sulfatized Ashes Content
NC 24-67-1987 Inorganic Chemical Products Techical Chlorhydric Acid Determination of Mercury Content by Means of the Dithizone Method
NC 24-69-1-1987 Inorganic Chemical Products Technical Aluminum Sulfate Determination of Insoluble Matter Content
NC 24-43-1985 Inorganic Chemical Products. Technical Hydrochloric Acid. Determination of Reducing or Oxidizing Substances by Volumetric Method

International Organization for Standardization (ISO), Deuterium content detection technology

ISO 10548:2002/cor 1:2008 Carbon fibre - Determination of size content; Technical Corrigendum 1
ISO 8968-4:2001/Cor 1:2011 Milk - Determination of nitrogen content - Part 4: Determination of non-protein-nitrogen content; Technical Corrigendum 1
ISO 8300:2013 Nuclear fuel technology.Determination of plutonium content in plutonium dioxide of nuclear grade quality.Gravimetric method
ISO/CD 7383-2:2023 Fine bubble technology — Evaluation method for determining gas content in fine bubble dispersions in water — Part 2: Hydrogen content
ISO 6853:1987 Photography; Processing waste; Determination of ammoniacal nitrogen content; Microdiffusion method
ISO 927:2009/cor 1:2012 Spices and condiments - Determination of extraneous matter and foreign matter content; Technical Corrigendum 1
ISO 14253-5:2015 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments
ISO/DIS 7383-1:2023 Fine bubble technology — Evaluation method for determining gas content in ultrafine bubble dispersions in water — Part 1: Oxygen content
ISO 11465:1993/Cor 1:1994 Soil quality; determination of dry matter and water content on a mass basis; gravimetric method; technical corrigendum 1
ISO 8420:2002/cor 1:2004 Animal and vegetable fats and oils - Determination of content of polar compounds; Technical Corrigendum 1
ISO 9874:2006/Cor 1:2007 Milk - Determination of total phosphorus content - Method using molecular absorption spectrometry; Technical Corrigendum 1
ISO 14896:2000/Cor 1:2005 Plastics - Polyurethane raw materials - Determination of isocyanate content; Technical Corrigendum 1
ISO 126:1989/Cor 1:1992 Natural rubber latex concentrate; determination of dry rubber content; technical corrigendum 1
ISO 17278:2020 Rubber, raw natural — Determination of the gel content of technically specified rubber (TSR)
ISO/TS 23690:2023 Nanotechnologies — Multiwall carbon nanotubes — Determination of carbon impurity content by thermogravimetric analysis
ISO/TS 14253-2:1999/Cor 1:2007 Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification; Technical Co
ISO 5983-1:2005/cor 1:2008 Animal feeding stuffs - Determination of nitrogen content and calculation of crude protein content - Part 1: Kjeldahl method; Technical Corrigendum 1
ISO 11427:1993/Cor 1:1994 Determination of silver in silver jewellery alloys - Volumetric (potentiometric) method using potassium bromide; Technical Corrigendum 1
ISO 625:1996/cor 1:1996 Solid mineral fuels - Determination of carbon and hydrogen - Liebig method; Technical Corrigendum 1
ISO/DIS 7383 Fine bubble technology — Evaluation method for determining oxygen content in fine bubble dispersions in water
ISO 19739:2004/cor 1:2009 Natural gas - Determination of sulfur compounds using gas chromatography; Technical Corrigendum 1
ISO/TS 14253-2:1999 Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
ISO 609:1996/Cor 1:1996 Solid mineral fuels - Determination of carbon and hydrogen - High temperature combustion method
ISO 6851:1987 Photography; Processing waste; Determination of total amino nitrogen; Microdiffusion Kjeldahl method
ISO 10360-2:2001 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring size
ISO 8968-3:2004/Cor 1:2011 | IDF 20-3:2004/Cor 1:2011 Milk — Determination of nitrogen content — Part 3: Block-digestion method (Semi-micro rapid routine method) — Technical Corrigendum 1
ISO/TS 14253-3:2002 Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements
ISO 3930:1993 Road vehicles; measurement equipment for exhaust gas emissions during inspection or maintenance; technical specifications
ISO 17226-2:2008/Cor 1:2009 | IULTCS/IUC 19-2 Leather — Chemical determination of formaldehyde content — Part 2: Method using colorimetric analysis — Technical Corrigendum 1
ISO 14253-1:2013 Geometrical product specifications (GPS).Inspection by measurement of workpieces and measuring equipment.Part 1: Decision rules for proving conformity or nonconformity with specifications
ISO 14253-1:1998 Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipments - Part 1: Decision rules for proving conformance or non-conformance with specifications
ISO 14253-1:2017 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications
ISO 2453:1991/cor 1:2003 Rubber, raw styrene-butadiene, emulsion-polymerized - Determination of bound styrene content - Refractive index method; Technical Corrigendum 1
ISO 14253-2:2011/cor 1:2013 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification; Technica
ISO 10360-4:2000/cor 1:2002 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 4: CMMs used in scanning measuring mode; Technical Corrigendum 1
ISO 11873:2005/cor 1:2008 Hardmetals - Determination of sulfur and carbon contents in cobalt metal powders - Infrared detection method; Technical Corrigendum 1
ISO 16586:2003/Cor 1:2009 Soil quality - Determination of soil water content as a volume fraction on the basis of known dry bulk density - Gravimetric method; Technical Corrigendum 1
ISO 14596:1998/Cor 1:1999 Petroleum products - Determination of sulfur content - Wavelength-dispersive X-ray fluorescence spectrometry; Technical corrigendum 1
ISO 17226-2:2008/cor 1:2009 Leather - Chemical determination of formaldehyde content - Part 2: Method using colorimetric analysis; Technical Corrigendum 1
ISO 10360-5:2000 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 5: CMMs using multiple-stylus probing systems
ISO 22475-1:2006 Geotechnical investigation and testing - Sampling methods and groundwater measurements - Part 1: Technical principles for execution
ISO 22475-1:2021 Geotechnical investigation and testing - Sampling methods and groundwater measurements - Part 1: Technical principles for the sampling of soil, rock and groundwater
ISO 10360-2:2009 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions
ISO 14869-3:2017 Soil quality - Dissolution for the determination of total element content - Part 3: Dissolution with hydrofluoric, hydrochloric and nitric acids using pressurised microwave technique

AENOR, Deuterium content detection technology

UNE 37254:1986 LEAD. DETERMINATION OF ZINC CONTENT. SPECTROMETRIC METHOD ABSORPTION TECHNIQUE.
UNE 37251:1986 LEAD. DETERMINATION OF SILVER CONTENT. SPECTROMETRIC METHOD BY ATOMIC ABSORTION TECHNIQUE.
UNE 37255:1986 LEAD. DETERMINATION OF IRON CONTENT. SPECTROMETRIC METHOD BY ATOMIC ABSORTION TECHNIQUE.
UNE 37253:1986 LEAD. DETERMINATION OF COPPER CONTENT. SPECTROMETRIC METHOD BY ATOMIC ABSORPTION TECHNIQUE.
UNE 37256:1986 LEAD. DETERMINATION OF ANTIMONY CONTENT IN LEAD. SPECTROMETRIC METHODS BY ATOMIC ABSORPTION TECHNIQUE.

ES-UNE, Deuterium content detection technology

UNE 37254:1987 ERRATUM LEAD. DETERMINATION OF ZINC CONTENT. SPECTROMETRIC METHOD ABSORPTION TECHNIQUE.
UNE-EN ISO 927:2010/AC:2012 Spices and condiments - Determination of extraneous matter and foreign matter content - Technical Corrigendum 1 (ISO 927:2009/Cor 1:2012)
UNE-EN 1007-1:2002 Advanced technical ceramics - Ceramic composites - Methods of test for reinforcement - Part 1: Determination of size content (Endorsed by AENOR in November of 2002.)

Professional Standard - Commodity Inspection, Deuterium content detection technology

SN/T 1797.3-2008 Technical regulation on safety and sanitation for insepcetion of iron ore.Part 3:Silicon content for quality evaluation
SN/T 1797.4-2008 Technical regulation on safety and sanitation for insepcetion of iron ore.Part 4:Aluminium content for quality evaluation
SN/T 1797.2-2008 Technical regulation on safety and sanitation for insepcetion of iron ore.Part 2:Total iron for quality evaluation
SN/T 1797.6-2008 Technical regulation on safety and sanitation for insepcetion of iron ore.Part 6:Moisture content for quality evaluation
SN/T 3374.1-2012 Test methods for information technology equipment for import and export.Part 1:Measurement for the power consumption

Shandong Provincial Standard of the People's Republic of China, Deuterium content detection technology

DB37/T 3824.2-2019 Silage Quality Testing and Evaluation Technical Specifications Part 2: Determination of Absorbable Starch Content in Silage Corn
DB37/T 5262-2023 Technical Standard for Quality Inspection of Underground Holes and Grooves
DB37/T 2995-2017 Fluorescent quantitative PCR detection technique for Haemophilus parasuis
DB37/T 4510-2022 Technical specification for power quality inspection of mine power supply system
DB37/T 3824.4-2019 Silage Quality Testing and Evaluation Technical Specifications Part 4: Technical Specifications for Mycotoxin Detection in Silage
DB37/T 4496-2022 Technical specification for quality inspection of hydraulic concrete surface coating
DB37/T 4187-2020 Technical specification for inspection and appraisal of civil air defense engineering protection quality
DB3703/T 036-2005 Technical Standards for Quality Inspection of Pollution-free Vegetable Products in Zibo City
DB37/T 2977-2017 Technical Regulations for Determination of SBS Modifier Content in Road Asphalt (Infrared Spectroscopy)
DB37/T 2641-2015 Technical requirements and detection methods of portable multi-gas measurement system by ultraviolet absorption method
DB37/T 3824.3-2019 Technical specification for quality inspection and evaluation of silage feed Part 3: Technical specification for operation quality of multifunctional forage grinder
DB37/T 5010-2021 Technical management regulations for quality inspection of housing construction and municipal infrastructure projects
DB37/T 3824.1-2019 Technical specifications for quality inspection and evaluation of silage feed Part 1: Technical specifications for mechanical kneading quality evaluation of whole plant corn silage production
DB37/T 3624-2019 Technical regulations for the detection of aerosol Mycobacterium tuberculosis complex in cattle farms by fluorescence quantitative PCR
DB37/T 3625-2019 Technical regulations for identification and detection of aerosol Brucella by fluorescent quantitative PCR in cattle and sheep farms

Professional Standard - Energy, Deuterium content detection technology

NB/T 35058-2015 Technical specification for inspection of rock mass quality of hydropower projects
NB/T 32006-2013 Test code for power quality of photovoltaic power station
NB/T 32008-2013 Testing code for power quality of inverters used in photovoltaic power station
NB/T 20610-2021 Measurement of sludge height on secondary side of steam generator tube sheet in nuclear power plant based on eddy current detection technology

Professional Standard - Urban Construction, Deuterium content detection technology

CJJ/T 164-2011 Standard for quality inspection of shield tunnel segment

Sichuan Provincial Standard of the People's Republic of China, Deuterium content detection technology

DB5115/T 13-2019 Yibin camphor crude oil quality inspection technical specification
DB51/T 2275-2016 Technical regulations for quality inspection of real estate surveying and mapping results
DB51/T 2274-2016 Technical regulations for quality inspection of surveying and mapping results dedicated to geological disaster prevention and control
DB51/T 2190-2016 General Technical Specifications for On-line Detection and Status Evaluation System of Electric Energy Metering Devices

Anhui Provincial Standard of the People's Republic of China, Deuterium content detection technology

DB34/T 2938-2017 Dendrobium Huoshanense Fengdou quality inspection technical regulations
DB34/T 3457-2019 Construction project quality inspection technology management regulations
DB34/T 2937-2017 Huoshan Dendrobium candidum Fengdou quality inspection technical regulations
DB34/T 2207-2014 Technical regulations for testing the quality of earthwork filling works by static penetrating sounding method
DB34/T 4238-2022 Technical regulations for construction quality inspection of hydraulic concrete aging protection treatment

Jilin Provincial Standard of the People's Republic of China, Deuterium content detection technology

DB22/T 1922-2013 Technical service specification for quality inspection of fitted glasses
DB22/T 1922-2018 Technical service specification for quality inspection of fitted glasses
DB22/T 2959-2018 Fluorescent Quantitative Gene Rapid Detection Technical Regulations
DB22/T 3567-2023 Tumor gene mutation detection—high-throughput sequencing technology specifications
DB22/T 2987-2019 Technical specifications for the detection of Bt protein expression in insect-resistant corn
DB22/T 2042-2014 Specifications for quality control of test results of motor vehicle safety technical inspection institutions
DB22/T 3459-2023 Technical regulations for pesticide application quality inspection of plant protection UAV aeronautical operations
DB22/T 1840-2013 Standards for Supervision and Management of Technical Institution Test Report/Certificate Quality Level

Professional Standard - Archives, Deuterium content detection technology

DA/T 81-2019 Technical specifications for air quality testing in archive warehouses

RO-ASRO, Deuterium content detection technology

STAS 7352/1-1988 APPARATUS FOR BLOOD PRESSURE MEASUREMENT WITH MERCURY GAUGES General technical requirements for quality
STAS 12913-1991 Alpha, beta and slpha-beta, contamination meters and monitors. General technical requirements
STAS 5270-1990 Solid fuels. Sulphur content determination under different chemical and technological forms
STAS 12341/1-1985 DETERMINATION OF THE DELTA FERR1TE CONTENT IN A US TENITIC STAINLESS WELD METAL Magnetic contact method. Technical requirements

Standard Association of Australia （SAA）, Deuterium content detection technology

AS 3507.2:2006 Non-destructive testing - Radiographic determination of quality of ferrous castings

国家市场监督管理总局、中国国家标准化管理委员会, Deuterium content detection technology

GB/T 37871-2019 Technical specification for quality evaluation of nucleic acid test kit
GB/T 40259-2021 General specification for supporting quality of longwall face
GB/T 37498-2019 Rubber,raw natural—Determination of the gel content of technically specified rubber (TSR)
GB/T 16857.901-2020 Geometrical product specifications (GPS)—Acceptance and reverification tests for coordinate measuring machines (CMM)—Part 901: CMMs with multiple imaging probing system
GB/T 18779.5-2020 Geometrical product specifications (GPS)—Inspection by measurement of workpieces and measuring equipment—Part 5: Uncertainty in verification testing of indicating measuring instruments
GB/T 38261-2019 Nanotechnology—Determination of silver contents in biological samples—Inductively coupled plasma mass spectrometry
GB/T 40458-2021 Specification of nucleic acid extraction used for high-throughput detection of pathogenic microorganisms
GB/T 41067-2021 Nanotechnologies—Determination of sulfur, fluorine, chlorine and bromine content in graphene flakes—Combustion ion chromatography method
GB/T 41068-2021 Nanotechnologies—Determination of water-soluble anions content in graphene powder—Ion chromatography method
GB/T 40742.1-2021 Geometrical product specifications (GPS)—Geometrical precision verification—Part 1：Basic concept and measurement—Symbol, terminology, measuring conditions and procedures
GB/T 34874.6-2020 Geometrical product specifications (GPS)—X-ray three dimensional size measuring machines—Part 6: Testing method of workpieces
GB/T 40742.5-2021 Geometrical product specifications (GPS)—Geometrical precision verification—Part 5: Estimation of uncertainty of measurement for geometrical characteristics verification

API - American Petroleum Institute, Deuterium content detection technology

API PUBL 4698-1999 A Review of Technologies to Measure the Oil and Grease Content of Produced Water from Offshore Oil and Gas Production Operations

ES-AENOR, Deuterium content detection technology

CN-QIYE, Deuterium content detection technology

Q/GDW 11364-2014 Technical specification for measurement performance testing of analog input merging unit

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Deuterium content detection technology

GB/T 16857.2-2017 Geometrical product specifications (GPS)—Acceptance and reverification tests for coordinate measuring machines (CMM)—Part 2: CMMs used for measuring linear dimensions
GB/T 34890-2017 Geometrical product specification（GPS）—Acceptance and reverification tests for digital photogrammetry 3D coordinate measuring system
GB/T 34874.3-2017 Geometrical product specifications (GPS)—X-ray three dimensional size measuring machines—Part 3：Acceptance and reverification tests
GB/T 35725-2017 General requirements for automatic testing system of power quality monitoring equipment
GB/T 33249-2016 Nanotechnology—Quantification of gold nanorods in living cells—Extinction spectroscopy
GB/T 34916-2017 Nanotechnologies—Multi-walled carbon nanotubes—Determination of amorphous carbon content by thermogravimetric analysis
GB/T 16857.5-2017 Geometrical product specifications(GPS)—Acceptance and reverification tests for coordinate measuring machines (CMM)—Part 5:CMMs using single or multiple stylus contacting probing systems
GB/T 34881-2017 Geometrical product specifications (GPS)—Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty
GB/T 36084-2018 Nanotechnology—Determination of copper, manganese and chromium ions in aqueous solution—Ultraviolet-visible spectrophotometry

Association Francaise de Normalisation, Deuterium content detection technology

NF EN ISO 16828:2014 Essais non destructifs - Contrôle par ultrasons - Technique de diffraction du temps de vol utilisée comme méthode de détection et de dimensionnement des discontinuités
NF M60-405*NF ISO 8425:2014 Nuclear fuel technology - Determination of plutonium in pure plutonium nitrate solutions - Gravimetric method
NF M60-404*NF ISO 8300:2014 Nuclear fuel technology - Determination of plutonium content in plutonium dioxide of nuclear grade quality - Gravimetric method
NF ISO 247-1:2018 Caoutchouc - Détermination du taux de cendres - Partie 1 : technique de combustion sèche
NF EN ISO 3690:2018 Soudage et techniques connexes - Détermination de la teneur en hydrogène dans le métal fondu pour le soudage à l'arc
NF E11-150-5:2010 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 5 : CMMs using single and multiple stylus contacting probing systems.
NF E11-091:2013 Geometrical product specification (GPS) - Dimensional measuring equipment - Reception and verification of callipers
NF M60-406:2009 Nuclear energy - Nuclear fuel technology - Determination of plutonium in nitric acid solutions by spectrophotometry.
NF M60-406*NF EN ISO 9463:2021 Nuclear Energy - Nuclear Fuel Technology - Determination of plutonium in nitric acid solutions by spectrophotometry
NF E11-150-2*NF EN ISO 10360-2:2010 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2 : CMMs used for measuring linear dimensions
XP T16-104*XP CEN/TS 17010:2017 Nanotechnologies - Guidance on measurands for characterising nano-objects and materials that contain them
NF E10-201-3*NF EN ISO 14253-3:2011 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3 : guidelines for achieving agreements on measurement uncertainty statements
NF P94-510-1:2007 Geotechnical investigation and testing - Sampling methods and groundwater measurements - Part 1 : technical principles for execution.
NF R10-019:1996 Road vehicles. Measurement equipment for exhaust gas emissions during inspection or maintenance. Technical specifications.

Beijing Provincial Standard of the People's Republic of China, Deuterium content detection technology

DB11/T 998-2022 Technical regulations for quality inspection and acceptance of basic surveying and mapping results
DB11/T 325-2005 Technical specification for environmental quality testing and evaluation of vegetable production bases
DB11/T 1649-2019 Technical regulations for inspection and acceptance of construction project planning verification and measurement results
DB11/T 1674-2019 Technical regulations for quality inspection and acceptance of geographic national conditions census and monitoring results

Heilongjiang Provincial Standard of the People's Republic of China, Deuterium content detection technology

DB23/T 2475-2019 Technical specifications for the construction of forestry carbon sink measurement and detection system
DB23/T 3350-2022 Heilongjiang Provincial Construction Engineering Quality Inspection Organization On-site Inspection Technology Management Standard
DB23/T 3012-2021 Specifications for quality control of test results of motor vehicle safety technical inspection institutions

German Institute for Standardization, Deuterium content detection technology

DIN 55437-3:2008 Testing of board - Creasings - Part 3: Determination of the technical quality
DIN EN ISO 16828:2014-06 Non-destructive testing - Ultrasonic testing - Time-of-flight diffraction technique as a method for detection and sizing of discontinuities (ISO 16828:2012); German version EN ISO 16828:2014
DIN EN ISO 10360-2:2010 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions (ISO 10360-2:2009); German version EN ISO 10360-2:2009
DIN EN ISO 10545-2:1997 Ceramic tiles - Part 2: Determination of dimensions and surface quality (ISO 10545-2:1995, including Technical Corrigendum 1:1997); German version EN ISO 10545-2:1997
DIN 55437-3:2021 Testing of folding cartonboard - Creasings - Part 3: Determination of the technical quality of creasings
DIN EN 725-3:2007 Advanced technical ceramics - Methods of test for ceramic powders - Part 3: Determination of the oxygen content of non-oxides by thermal extraction with a carrier gas; English version of DIN EN 725-3:2007-04
DIN EN 725-4:2006 Advanced technical ceramics - Methods of test for ceramic powders - Part 4: Determination of oxygen content in aluminium nitride by XRF analysis; English version of DIN EN 725-4:2006-07
DIN VDE 0119-207-9:2005 State of the railway vehicles - Control and instrumentation technology - Part 207-9: Fire-extinguishing and fire-detection equipment
DIN EN ISO 10360-7:2011 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011); German version EN ISO 10360-7:2011
DIN ISO/TS 14253-3:2008 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO/TS 14253-3:2002); German version CEN ISO/TS 14253-3:2007
DIN 51855-1:2011 Testing of gaseous fuels and other gases - Determination of the content of sulphur compounds - Part 1: Field of application, terms
DIN EN ISO 14253-5:2016 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments (ISO 14253-5:2015); German version EN ISO 14253-5:2015
DIN EN ISO 8420 Berichtigung 1:2008 Animal and vegetable fats and oils - Determination of content of polar compounds (ISO 8420:2002); German version EN ISO 8420:2002, Corrigendum to DIN EN ISO 8420:2002-08; German version EN ISO 8420:2002/AC:2008
DIN 41636-1:1980 Sensitive switches for communication technology; climatic test categories, measuring methods and testing procedures

国家文物局, Deuterium content detection technology

WW/T 0016-2008 Technical specifications for environmental quality inspection of cultural relics in collections

国家质量监督检验检疫总局, Deuterium content detection technology

SN/T 4800-2017 Technical Regulations for Quality Evaluation of ELISA Test Kits for Entry and Exit Animal Quarantine

Professional Standard - Public Safety Standards, Deuterium content detection technology

GA/T 1713-2020 Information Security Technology Abnormal Traffic Detection and Cleaning Product Safety Technical Requirements
GA/T 1714-2020 Information Security Technology Abnormal Traffic Detection and Cleaning Product Safety Technical Requirements

未注明发布机构, Deuterium content detection technology

ISO 665:2000/Cor 1:2002 Oilseeds -Determinationof moisture and volatile matter content
ISO 4935:1989/Cor 1:1990 Steel and iron — Determination of sulfur content — Infrared absorption method after combustion in an induction furnace
ISO 1391-4:1976/Cor 1:1977 Test methods for industrial paraformaldehyde Part 4: Determination of water-insoluble matter content Corrigendum 1

CENELEC - European Committee for Electrotechnical Standardization, Deuterium content detection technology

EN 60060-2-2011(1) High-Voltage Test Techniques - Part 2: Measuring Systems (Incorporates Amendment A11: 1998)
EN 61000-4-30:2015+A1:2021 Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods
EN 61400-11:2003 Wind turbine generator systems Part 11: Acoustic noise measurement techniques (Incorporates Amendment A1: 2006)

European Committee for Standardization (CEN), Deuterium content detection technology

EN ISO 10360-7:2011 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011)
EN ISO 10360-1:2000/AC:2002 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 1: Vocabulary (ISO 10360-1:2000/Cor.1:2002)
EN ISO 14253-2:2011/AC:2013 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification - Technic
EN ISO 16828:2014 Non-destructive testing - Ultrasonic testing - Time-of-flight diffraction technique as a method for detection and sizing of discontinuities
EN ISO 14253-5:2015 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments (ISO 14253-5:2015)
EN ISO 14253-3:2011 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO 14253-3:2011)
EN 725-3:2007 Advanced technical ceramics - Methods of test for ceramic powders - Part 3: Determination of the oxygen content of non-oxides by thermal extraction with a carrier gas
EN 725-3:1994 Advanced Technical Ceramics - Methods of Test for Ceramic Powders Part 3. Determination of the Oxygen Content of Non-Oxides by Thermal Extraction with a Carrier Gas
PD CEN/TS 17010:2016 Nanotechnologies - Guidance on measurands for characterising nano-objects and materials that contain them
EN ISO 14253-1:2013 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for proving conformity or nonconformity with specification
EN ISO 14253-1:2017 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications (ISO 14253-1:2017)
EN 725-4:2006 Advanced technical ceramics - Methods of test for ceramic powders - Part 4: Determination of oxygen content in aluminium nitride by XRF analysis
EN ISO 14253-2:2011 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
EN ISO 10360-2:1995 Coordinate Metrology - Part 2. Performance Assessment of Coordinate Measuring Machines (ISO 10360-2 : 1994)
EN ISO 10360-2:2009 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions (ISO 10360-2:2009)
EN ISO 7779:2001/A1:2003 Acoustics - Measurement of airborne noise emitted by information technology and telecommunications equipment - Amendment 1: Noise measurement specification for CD/DVDROM drives Ratified European Text; ISO 7779:2001/AM 1:2003
EN ISO 10360-1:2000 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 1: Vocabulary
EN ISO 10360-6:2001/AC:2008 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features (ISO 10360-6:2001/Cor 1:2007)
EN ISO 14253-1:1998 Geometrical Product Specifications (GPS) - Inspection by Measurement of Workpieces and Measuring Equipment - Part 1: Decision Rules for Proving Conformance or Non-Conformance with Specifications ISO 14253-1:1998
ENV ISO 14253-2:2001 Geometrical Product Specifications (GPS)- Inspection by Measurement of Workpieces and Measuring Equipments - Part 2: Guide to the Estimation of Uncertainty in GPS Measurement, in Calibration of Measuring Equipment and in Product Verification
CEN ISO/TS 14253-4:2010 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 4: Background on functional limits and specification limits in decision rules (ISO/TS 14253-4:2010)
PD CEN/TS 16429:2013 Stationary source emissions - Sampling and determination of hydrogen chloride content in ducts and stacks - Infrared analytical technique
DD ENV 1007-1-1993 Advanced Technical Ceramics - Ceramic Composites - Methods of Test for Reinforcements - Part 1: Determination of Size Content
EN ISO 463:2006/AC:2009 Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006/Cor 1:2007/Cor 2:2009)
EN ISO 10360-2:2001 Geometrical Product Specifications (GPS) - Acceptance and Reverification Tests for Coordinate Measuring Machines (CMM) - Part 2: CMMs Used for Measuring Size ISO 10360-2: 2001
EN ISO 10360-4:2000 Geometrical Product Specifications (GPS) - Acceptance and Reverification Tests for Coordinate Measuring Machines (CMM) - Part 4: CMMs Used in Scanning Measuring Mode ISO 10360-4:2000
EN ISO 10360-10:2021 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers (ISO 10360-10:2021)

U.S. Military Regulations and Norms, Deuterium content detection technology

ARMY MIL-HDBK-682 VALID NOTICE 1-2004 TOLERANCING, DIMENSIONING, AND GAGING TECHNIQUES FOR THE DESIGN OF INSPECTION EQUIPMENT
ARMY MIL-HDBK-682-1991 TOLERANCING, DIMENSIONING, AND GAGING TECHNIQUES FOR THE DESIGN OF INSPECTION EQUIPMENT

Fujian Provincial Standard of the People's Republic of China, Deuterium content detection technology

DB35/T 1412-2014 Prestressed anchor (cable) tension and quality inspection technical regulations
DB35/T 2094-2022 Technical regulations for quality inspection of highway engineering completion (handover) acceptance
DB35/T 2075-2022 Technical specification for non-destructive testing of construction quality of inverted arches in highway tunnels
DB35/T 1638-2017 Technical regulations for quality inspection and evaluation of prestressed construction of highway concrete bridges
DB35/T 1447-2014 Technical regulations for detection of chloride ion penetration resistance (electric flux method) of concrete for water transportation projects in Fujian Province

Professional Standard - Post and Telecommunication, Deuterium content detection technology

YD/T 2668-2013 Technical requirements for detection and control of abnormal traffic in telecommunication networks
YD/T 791-1995 Technical requirement and test method for radio paging receivers
YD/T 4348-2023

Hubei Provincial Standard of the People's Republic of China, Deuterium content detection technology

DB42/T 1071-2015 Technical Specifications for Quality Inspection of Land Consolidation Projects in Hubei Province
DB42/T 2086.1-2023 Management Requirements for Agricultural Product Quality and Safety Inspection Institutions Part 1: Technical File Management

National Metrological Technical Specifications of the People's Republic of China, Deuterium content detection technology

JJF 1261.15-2018 Measuring and testing rules for energy efficiency of household refrigerators Measuring technical specifications

Tianjin Provincial Standard of the People's Republic of China, Deuterium content detection technology

DB12/T 494-2013 Technical specification for quality and safety supervision and testing of aquatic compound feed
DB12/T 841-2018 Technical specifications for quantitative detection of components of transgenic plants and their products Micro-droplet digital PCR method

American Society for Testing and Materials (ASTM), Deuterium content detection technology

ASTM E2261-03 Standard Practice for Examination of Welds Using the Alternating Current Field Measurement Technique
ASTM E2261-07 Standard Practice for Examination of Welds Using the Alternating Current Field Measurement Technique
ASTM E2261/E2261M-17(2021) Standard Practice for Examination of Welds Using the Alternating Current Field Measurement Technique
ASTM E2261/E2261M-17 Standard Practice for Examination of Welds Using the Alternating Current Field Measurement Technique
ASTM D4125-05 Standard Test Methods for Asphalt Content of Bituminous Mixtures by the Nuclear Method
ASTM E1569-09 Standard Test Method for Determination of Oxygen in Tantalum Powder by Inert Gas Fusion Technique
ASTM E2928/E2928M-23 Standard Practice for Examination of Drillstring Threads Using the Alternating Current Field Measurement Technique
ASTM E2928/E2928M-17 Standard Practice for Examination of Drillstring Threads Using the Alternating Current Field Measurement Technique
ASTM E2261/E2261M-12 Standard Practice for Examination of Welds Using the Alternating Current Field Measurement Technique
ASTM E385-90 Standard Test Method for Oxygen Content Using a 14-MeV Neutron Activation and Direct-Counting Technique
ASTM E1409-97 Standard Test Method for Determination of Oxygen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique
ASTM D4218-96(2001) Standard Test Method for Determination of Carbon Black Content in Polyethylene Compounds By the Muffle-Furnace Technique
ASTM E385-22 Standard Test Method for Oxygen Content Using a 14-MeV Neutron Activation and Direct-Counting Technique
ASTM E140-12a Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness
ASTM E140-12 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
ASTM E2928/E2928M-13 Standard Practice for Examination of Drillstring Threads Using the Alternating Current Field Measurement Technique
ASTM D4218-96(2008) Standard Test Method for Determination of Carbon Black Content in Polyethylene Compounds By the Muffle-Furnace Technique
ASTM D4218-96 Standard Test Method for Determination of Carbon Black Content in Polyethylene Compounds By the Muffle-Furnace Technique
ASTM E385-90(1996) Standard Test Method for Oxygen Content Using a 14-MeV Neutron Activation and Direct-Counting Technique
ASTM D4218-20 Standard Test Method for Determination of Carbon Black Content in Polyethylene Compounds by the Muffle-Furnace Technique
ASTM E1409-04 Standard Test Method for Determination of Oxygen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique
ASTM E1937-97 Standard Test Method for Determination of Nitrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique
ASTM D4218-15 Standard Test Method for Determination of Carbon Black Content in Polyethylene Compounds By the Muffle-Furnace Technique
ASTM E1019-11 Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Fusion Techniques
ASTM D4075-02 Standard Test Methods for Compounding Materials-Flame Atomic Absorption Technique-Determination of Metals
ASTM E385-11 Standard Test Method for Oxygen Content Using a 14-MeV Neutron Activation and Direct-Counting Technique
ASTM D6966-13 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals

Professional Standard - Business, Deuterium content detection technology

SB/T 10750-2012 Technical specification for product quality testing laboratory of the staple food processing & distributing center

Professional Standard - Environmental Protection, Deuterium content detection technology

HJ 15-2019 Ultrasonic open channel sewage flowmeter technical requirements and testing methods
HJ 845-2017 Measurement method and specifications for exhaust pollutants from in-use diesel vehicles by remote sensing method
HJ 377-2019 Technical requirements and detection methods of chemical oxygen demand (CODCr) water quality online automatic monitor

Hunan Provincial Standard of the People's Republic of China, Deuterium content detection technology

DB43/T 1997-2021 Technical Specifications for Integral Error Detection of Digital Electric Energy Metering Devices

Henan Provincial Standard of the People's Republic of China, Deuterium content detection technology

DB41/T 2454-2023 Technical Specifications for Validity Confirmation of Verification and Calibration Certificates for Measuring Instruments
DB41/T 2311-2022 Technical specification for quality inspection of prestressed tunnel grouting in highway bridges

Jiangxi Provincial Standard of the People's Republic of China, Deuterium content detection technology

DB36/T 1135-2019 Technical guidelines for continuous compaction quality control and PFWD detection of highway subgrade

Guangdong Provincial Standard of the People's Republic of China, Deuterium content detection technology

DB44/T 2389-2022 Technical requirements for the digital processing system of metrological testing data and results

Korean Agency for Technology and Standards (KATS), Deuterium content detection technology

KS C CISPR 24-2004 Information technology equipment-Immunity characteristics- Limits and methods of measurement
KS B ISO 10360-7:2004 Geometrical Product Specifications(GPS)-Acceptance and reverification tests for coordinate measuring machines(CMM)-Part 7:CMMs used for measuring
KS B ISO 10360-7:2015 Geometrical Product Specifications(GPS)-Acceptance and reverification tests for coordinate measuring machines(CMM)-Part 7:CMMs used for measuring
KS B ISO 14253-1:2012 Geometrical Product Specifications(GPS)-Inspection by measurement of workpieces and measuring equipment-Part 1:Decision rules for proving conformance or non-conformance with specifications
KS B ISO 14253-1:2014 Geometrical Product Specifications(GPS)-Inspection by measurement of workpieces and measuring equipment-Part 1:Decision rules for proving conformance or non-conformance with specifications
KS B ISO 14253-1:2015 Geometrical product specifications(GPS) — Inspection by measurement of workpieces and measuring equipment — Part 1: Decision rules for proving conformity or nonconformity with specifications
KS B ISO 10360-2:2003 Geometrical product specifications(GPS)-Acceptance and reverification tests for coodinate measuring machines(CMM)-Part 2:CMMs used for measuring size
KS B ISO 10360-2:2014 Geometrical product specifications(GPS)-Acceptance and reverification tests for coodinate measuring machines(CMM)-Part 2:CMMs used for measuring size
KS M ISO 7278-3-2003(2018)
KS M ISO 10349-6:2002 Photography－Photographic－grade chemicals－Test methods－Part 6：Determination of halide content
KS M ISO 10349-10:2002 Photography－Photographic－grade chemicals－Test methods－Part 10：Determination of sulfide content
KS X ISO/IEC 19796-3:2011 Information technology-Learning, education and training-Quality management, assurance and metrics-Part 3:Reference methods and metrics
KS X ISO/IEC 19796-1:2009 Information technology-Learning, education and training-Quality management, assurance and metrics-Part 1:General approach
KS M ISO 10349-5:2002 Photography－Photographic－grade chemicals－Test methods－Part 5：Determination of heavy metals and iron content
KS B ISO 14253-3:2014 Geometrical product specifications(GPS) — Inspection by measurement of workpieces and measuring equipment — Part 3: Guidelines for achieving agreements on measurement uncertainty statements
KS B ISO 14253-3:2012 Geometrical Product Specifications(GPS)-Inspection by measurement of workpieces and measuring equipment-Part 3:Guide lines for achieving agreements on measurement uncertainty statements
KS V ISO 16145-4-2017(2022) Ships and marine technology — Protective coatings and inspection method — Part 4: Automated measuring method for the total amount of water-soluble salts

YU-JUS, Deuterium content detection technology

JUS H.P8.089-1988 Testing of pesticides.Atrazine,technical.Determination of active ingradient content.Gas-liquid chromatography

Canadian Standards Association (CSA), Deuterium content detection technology

CAN/CSA-ISO/CEI-15416:2002 Technologies de l’information — Techniques d’identification automatique et de capture des données — Spécifications pour essai de qualité d’impression des codes à barres — Symboles linéaires
CAN/CSA-ISO/IEC 15415:2009 Information technology — Automatic identification and data capture techniques — Bar code print quality test specification — Two-dimensional symbols

Professional Standard - Petrochemical Industry, Deuterium content detection technology

SH 3505.4-1999 Technical code for construction safety in petrochemical engineering (Constructional measures and physicochemical tests)
SH 3505.4-1999（条文说明） Petrochemical construction safety technical regulations (construction survey and physical and chemical inspection)

American National Standards Institute （ANSI), Deuterium content detection technology

ANSI/ASTM D4218:1996 Test Method for Carbon Black Content in Polyethylene Compounds by the Muffle-Furnace Technique (08.03)

Professional Standard - Aerospace, Deuterium content detection technology

QJ 1441-1988 Main technical parameters and measurement methods of DC power supply for ground detection of missiles and launch vehicles

国家药监局, Deuterium content detection technology

YY/T 1865-2022 General technical requirements for BRCA gene mutation detection kits and databases (high-throughput sequencing method)

AT-ON, Deuterium content detection technology

ONORM ENV 1007-1-1993 Advanced technical ceramics - Ceramic cormposites -Methods of test for reinforcements - Part 1: Determination of size content
ONORM ENV 725-2-1994 Advanced technical ceramics. Methods of test for ceramic powders. Part 2: Determination of impurities in barium titanate

BE-NBN, Deuterium content detection technology

NBN T 63-128-1980 Surface active agents - Analysis of technical alkane sulphonates - Deermination of alkane monosulphonates content

Agricultural Standard of the People's Republic of China, Deuterium content detection technology

农业部1485号公告-14-2010 Detection of genetically modified plants and derived products.Technical specification for quantitative detection of exogenous proteins in Bt transgenic cotton
农业部1943号公告-4-2013 Detection of genetically modified plants and derived products.Technical specification for quantitative detection of exogenous proteins in Bt transgenic cotton

Lithuanian Standards Office , Deuterium content detection technology

LST EN ISO 927:2010/AC:2012 Spices and condiments - Determination of extraneous matter and foreign matter content - Technical Corrigendum 1 (ISO 927:2009/Cor.1:2012)

Indonesia Standards, Deuterium content detection technology

SNI ISO 7278-3:2011 Liquid hydrocarbons - Dynamic measurement - Proving systems forvolumetric meters - Part 3: Pulse interpolation techniques

Professional Standard - Railway, Deuterium content detection technology

TB/T 3015.2-2001 Overall dimensions of the overall wheel of railway vehicles Measuring tools Technical conditions Wheel rim inner diameter caliper
TB/T 3015.4-2001 Technical conditions of measuring tools for overall wheel dimensions of railway vehicles Wheel hub outer diameter calipers
TB/T 3015.6-2001 Overall dimensions of the overall wheel of railway vehicles Measuring tools Technical conditions Rim width calipers
TB/T 3015.1-2001 Rolling circle diameter calipers
TB/T 3015.3-2001 Measuring tools for overall wheel dimensions of railway vehicles Technical conditions Inner rim-hub distance calipers
TB/T 3015.5-2001 Technical conditions of measuring tools for overall wheel dimensions of railway vehicles Rim thickness difference calipers

Danish Standards Foundation, Deuterium content detection technology

DS/CEN/TS 16429:2013 Stationary source emissions - Sampling and determination of hydrogen chloride content in ducts and stacks - Infrared analytical technique

PH-BPS, Deuterium content detection technology

PNS ISO/TS 21237:2021 Nanotechnologies - Air filter media containing polymeric nanofibres - Specification of characteristics and measurement methods

GOSTR, Deuterium content detection technology

GOST R 59108-2020 Trunk pipeline transport of oil and oil products. Technical diagnostics. Metrological assurance of inline inspection

工业和信息化部, Deuterium content detection technology

YD/T 2931-2015 The technology of deep packet inspection system based on separation architecture requires independent traffic collection equipment

NEMA - National Electrical Manufacturers Association, Deuterium content detection technology

NEMA MITA WP 1-2017 Computed Tomography Image Quality (CTIQ): Low-Contrast Detectability (LCD) Assessment When Using Dose Reduction Technology