ZH

RU

ES

Leak detection series

Leak detection series, Total:378 items.

In the international standard classification, Leak detection series involves: Petroleum, petroleum products and natural gas handling equipment, Fluid storage devices, Non-destructive testing, Vocabularies, Pipeline components and pipelines, Electrical equipment for working in special conditions, MECHANICAL SYSTEMS AND COMPONENTS FOR GENERAL USE, Road vehicle systems, Seals, glands, Radiation protection, Optics and optical measurements, Nuclear energy engineering, Testing of metals, Inorganic chemicals, Mechanical testing, Semiconductor devices, Internal combustion engines for road vehicles, Vacuum technology, Power stations in general, Aircraft and space vehicles in general, Products of the chemical industry, Internal combustion engines, Shipbuilding and marine structures in general, Ventilators. Fans. Air-conditioners, Test conditions and procedures in general, Construction materials, Equipment for the chemical industry, Aerospace electric equipment and systems, Equipment for petroleum and natural gas industries, Air quality, Packaging materials and accessories, Environmental protection, Alarm and warning systems, Protection of and in buildings, Services, Commercial vehicles, Installations in buildings, Electrical wires and cables, Non-ferrous metals, On-board equipment and instruments, Freight distribution of goods, Acoustics and acoustic measurements, Fluid power systems, Sterilization and disinfection, Aerospace fluid systems and components.


Danish Standards Foundation, Leak detection series

  • DS/EN 13160-5/AC:2007 Leak detection systems - Part 5: Tank gauge leak detection systems
  • DS/EN 13160-5:2004 Leak detection systems - Part 5: Tank gauge leak detection systems
  • DS/EN 1518:1999 Non-destructive testing - Leak testing - Characterization of mass spectrometer leak detectors
  • DS/EN 13625:2002 Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage
  • DS/EN 13160-7:2003 Leak detection systems - Part 7: General requirements and test methods for interstitial spaces, leak protecting linings and leak protecting jackets
  • DS/EN 13160-1:2003 Leak detection systems - Part 1: General principles
  • DS/EN 13184/A1:2004 Non-destructive testing - Leak testing - Pressure change method
  • DS/EN 13184:2001 Non-destructive testing - Leak testing - Pressure change method
  • DS/EN 13185/A1:2004 Non-destructive testing - Leak testing - Tracer gas method
  • DS/EN 13160-3:2003 Leak detection systems - Part 3: Liquid systems for tanks
  • DS/EN 1593/A1:2004 Non-destructive testing - Leak testing - Bubble emission techniques
  • DS/EN 1593:2002 Non-destructive testing - Leak testing - Bubble emission techniques
  • DS/EN 13160-2:2003 Leak detection systems - Part 2: Pressure and vacuum systems
  • DS/EN 13185:2001 Non-destructive testing - Leak test - Tracer gas method
  • DS/EN 13160-4:2003 Leak detection systems - Part 4: Liquid and/or vapour sensor systems for use in leakage containments or interstitial spaces
  • DS/EN 1779/A1:2004 Non-destructive testing - Leak testing - Criteria for method and technique selection
  • DS/EN 1779:2002 Non-destructive testing - Leak testing - Criteria for method and technique selection
  • DS/EN 14291:2004 Foam producing solutions for leak detection on gas installations
  • DS/EN 2591-224:2008 Aerospace series - Elements of electrical and optical connection - Test methods - Part 224: RF leakage
  • DS/EN 15727:2010 Ventilation for buildings - Ducts and ductwork components, leakage classification and testing
  • DS/EN 2591-312:1998 Aerospace series - Elements of electrical and optical connection - Test methods - Part 312: Air leakage

Lithuanian Standards Office , Leak detection series

  • LST EN 13160-5-2005 Leak detection systems - Part 5: Tank gauge leak detection systems
  • LST EN 13160-5-2005/AC-2007 Leak detection systems - Part 5: Tank gauge leak detection systems
  • LST EN 1518-2001 Non-destructive testing - Leak testing - Characterization of mass spectrometer leak detectors
  • LST EN 13625-2002 Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage
  • LST EN 13160-7-2004 Leak detection systems - Part 7: General requirements and test methods for interstitial spaces, leak protecting linings and leak protecting jackets
  • LST EN 13160-1-2004 Leak detection systems - Part 1: General principles
  • LST EN 13185-2002 Non-destructive testing - Leak testing - Tracer gas method
  • LST EN 13184-2002 Non-destructive testing - Leak testing - Pressure change method
  • LST EN 13185-2002/A1-2004 Non-destructive testing - Leak testing - Tracer gas method
  • LST EN 13184-2002/A1-2004 Non-destructive testing - Leak testing - Pressure change method
  • LST EN 13160-3-2004 Leak detection systems - Part 3: Liquid systems for tanks
  • LST EN 1593-2001 Non-destructive testing - Leak testing - Bubble emission techniques
  • LST EN 1593-2001/A1-2004 Non-destructive testing - Leak testing - Bubble emission techniques
  • LST EN 13160-2-2004 Leak detection systems - Part 2: Pressure and vacuum systems
  • LST EN 13160-4-2004 Leak detection systems - Part 4: Liquid and/or vapour sensor systems for use in leakage containments or interstitial spaces
  • LST EN 1779-2001 Non-destructive testing - Leak testing - Criteria for method and technique selection
  • LST EN 1779-2001/A1-2004 Non-destructive testing - Leak testing - Criteria for method and technique selection
  • LST EN 14291-2005 Foam producing solutions for leak detection on gas installations
  • LST EN 2591-224-2008 Aerospace series - Elements of electrical and optical connection - Test methods - Part 224: RF leakage
  • LST EN 15727-2010 Ventilation for buildings - Ducts and ductwork components, leakage classification and testing
  • LST EN 2591-312-2001 Aerospace series - Elements of electrical and optical connection - Test methods - Part 312: Air leakage

AENOR, Leak detection series

  • UNE-EN 13160-5:2005 Leak detection systems - Part 5: Tank gauge leak detection systems
  • UNE-EN 13160-7:2017 Leak detection systems - Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets
  • UNE-EN 13160-4:2017 Leak detection systems - Part 4: Requirements and test/assessment methods for sensor based leak detection systems
  • UNE-EN 13160-7:2003 Leak detection systems - Part 7: General requirements and test methods for interstitial spaces, leak protecting linings and leak protecting jackets
  • UNE-EN 13160-1:2017 Leak detection systems - Part 1: General Principles
  • UNE-EN 13160-1:2003 Leak detection systems - Part 1: General principles
  • UNE-EN 13185/A1:2004 Non-destructive testing - Leak testing - Tracer gas method
  • UNE-EN ISO 20484:2017 Non-destructive testing - Leak testing - Vocabulary (ISO 20484:2017)
  • UNE-EN 13184/A1:2004 Non-destructive testing - Leak testing - Pressure change method
  • UNE-EN 13160-3:2004 Leak detection systems - Part 3: Liquid systems for tanks
  • UNE-EN 1593/A1:2004 Non-destructive testing - Leak testing - Bubble emission techniques
  • UNE-EN 13160-2:2003 Leak detection systems - Part 2: Pressure and vacuum systems
  • UNE-EN 13160-6:2017 Leak detection systems - Part 6: Sensors in monitoring wells
  • UNE-EN 13160-4:2003 Leak detection systems - Part 4: Liquid and/or vapour sensor systems for use in leakage containments or interstitial spaces
  • UNE-EN 1518:1999 NON-DESTRUCTIVE TESTING. LEAK TESTING. CHARACTERIZATION OF MASS SPECTROMETER LEAK DETECTORS.
  • UNE-EN 1779/A1:2004 Non-destructive testing - Leak testing - Criteria for method and technique selection
  • UNE-EN 13160-3:2017 Leak detection systems - Part 3: Requirements and test/assessment methods for liquid systems for tanks
  • UNE-EN 14291:2005 Foam producing solutions for leak detection on gas installations
  • UNE-EN 13160-2:2017 Leak detection systems - Part 2: Requirements and test/assessment methods for pressure and vacuum systems
  • UNE-EN 2591-312:1998 AEROSPACE SERIES. ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION. TEST METHODS. PART 312: AIR LEAKAGE.
  • UNE-EN 13160-5:2017 Leak detection systems - Part 5: Requirements and test/assessment methods for in-tank gauge systems and pressurised pipework systems
  • UNE 53968:2005 IN Standard procedures for the assessment of tightness verification and leak detection systems on installations for storaging of liquid oil products.
  • UNE-EN 15727:2010 Ventilation for buildings - Ducts and ductwork components, leakage classification and testing
  • UNE 53968:2005 IN/1M:2015 Standardized procedures for the assessment of tightness verification and leak detection systems in the storage facilities of liquid oil products.

German Institute for Standardization, Leak detection series

  • DIN EN ISO 20486:2018-05 Non-destructive testing - Leak testing - Calibration of reference leaks for gases (ISO 20486:2017); German version EN ISO 20486:2018
  • DIN EN 13160-7:2016-12 Leak detection systems - Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets; German version EN 13160-7:2016 / Note: Applies in conjunction with DIN EN 13160-2 (2016-12), DIN EN 13...
  • DIN EN ISO 20486:2018 Non-destructive testing - Leak testing - Calibration of reference leaks for gases (ISO 20486:2017)
  • DIN EN 1518:2019 Non-destructive testing - Leak testing - Characterization of mass spectrometer leak detectors
  • DIN EN 1518:2019-06 Non-destructive testing - Leak testing - Characterization of mass spectrometer leak detectors; German version EN 1518:1998
  • DIN EN 1518:1998 Non-destructive testing - Leak testing - Characterization of mass spectrometer leak detectors; German version EN 1518:1998
  • DIN EN 13160-4:2016-12 Leak detection systems - Part 4: Requirements and test/assessment methods for sensor based leak detection systems; German version EN 13160-4:2016
  • DIN EN 13625:2002-03 Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage; German version EN 13625:2001
  • DIN EN 13160-1:2016-12 Leak detection systems - Part 1: General Principles; German version EN 13160-1:2016
  • DIN EN ISO 20485:2018-05 Non-destructive testing - Leak testing - Tracer gas method (ISO 20485:2017); German version EN ISO 20485:2018
  • DIN EN 1593:1999-11 Non-destructive testing - Leak testing - Bubble emission techniques; German version EN 1593:1999
  • DIN EN 13184:2001-07 Non-destructive testing - Leak test - Pressure change method; German version EN 13184:2001
  • DIN EN ISO 20484:2017-07 Non-destructive testing - Leak testing - Vocabulary (ISO 20484:2017); German version EN ISO 20484:2017
  • DIN EN 13160-6:2016-12 Leak detection systems - Part 6: Sensors in monitoring wells; German version EN 13160-6:2016
  • DIN EN ISO 20485:2018 Non-destructive testing - Leak testing - Tracer gas method (ISO 20485:2017)
  • DIN EN 1779:1999-10 Non-destructive testing - Leak testing - Criteria for the method and technique selection; German version EN 1779:1999
  • DIN EN 13625:2002 Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage; German version EN 13625:2001
  • DIN EN ISO 20484:2017 Non-destructive testing - Leak testing - Vocabulary (ISO 20484:2017); German version EN ISO 20484:2017
  • DIN EN 13160-3:2016-12 Leak detection systems - Part 3: Requirements and test/assessment methods for liquid systems for tanks; German version EN 13160-3:2016
  • DIN EN 13160-7:2016 Leak detection systems - Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets; German version EN 13160-7:2016
  • DIN EN 13160-2:2016-12 Leak detection systems - Part 2: Requirements and test/assessment methods for pressure and vacuum systems; German version EN 13160-2:2016
  • DIN EN ISO 18081:2016-11 Non-destructive testing - Acoustic emission testing (AT) - Leak detection by means of acoustic emission (ISO 18081:2016); German version EN ISO 18081:2016
  • DIN EN 14291:2005-02 Foam producing solutions for leak detection on gas installations; German version EN 14291:2004
  • DIN EN 2591-224:2009-01 Aerospace series - Elements of electrical and optical connection - Test methods - Part 224: RF leakage; German and English version EN 2591-224:2007 / Note: Applies in conjunction with DIN EN 2591-100 (2006-08).
  • DIN EN 2591-312:1997-12 Aerospace series - Elements of electrical and optical connection; test methods - Part 312: Air leakage; German version EN 2591-312:1997
  • DIN EN 13160-5:2016-12 Leak detection systems - Part 5: Requirements and test/assessment methods for in-tank gauge systems and pressurised pipework systems; German version EN 13160-5:2016
  • DIN 54136-1:1988 Non-destructive testing; magnetic leakage flux testing by scanning with probes; principles
  • DIN EN ISO 18081:2016 Non-destructive testing - Acoustic emission testing (AT) - Leak detection by means of acoustic emission (ISO 18081:2016); German version EN ISO 18081:2016
  • DIN EN 15727:2010-10 Ventilation for buildings - Ducts and ductwork components, leakage classification and testing; German version EN 15727:2010
  • DIN VDE 0472-505:1983 Testing of cables, wires and flexible cords; loss factor, dielectric loss coefficient and leakance [VDE Specification]
  • DIN EN 13160-4:2003 Leak detection systems - Part 4: Liquid and/or vapour sensor systems for use in leakage containments or interstitial spaces; German version EN 13160-4:2003
  • DIN EN 2591-224:2009 Aerospace series - Elements of electrical and optical connection - Test methods - Part 224: RF leakage; German and English version EN 2591-224:2007

Association Francaise de Normalisation, Leak detection series

  • NF EN ISO 20486:2018 Essais non destructifs - Contrôle d'étanchéité - Étalonnage des fuites de référence des gaz
  • NF A09-461*NF EN ISO 20486:2018 Non-destructive testing - Leak testing - Calibration of reference leaks for gases
  • NF E86-601-7*NF EN 13160-7:2017 Leak detection systems - Part 7 : requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets
  • NF A09-462*NF EN 13625:2002 Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage.
  • NF A09-020*NF EN ISO 20484:2017 Non-destructive testing - Leak testing - Vocabulary
  • NF EN ISO 20484:2017 Essais non destructifs - Contrôle d'étanchéité - Vocabulaire
  • NF EN 13625:2002 Essais non destructifs - Contrôle d'étanchéité - Guide pour la sélection des instruments utilisés pour le mesurage des fuites gazeuses
  • NF E86-601-4*NF EN 13160-4:2017 Leak detection systems - Part 4: requirements and test/assessment methods for sensor based leak detection systems
  • NF EN 13160-4:2017 Systèmes de détection de fuites - Partie 4 : exigences et méthodes d'essai/d'évaluation des systèmes de détection de fuite par capteur
  • NF EN 13160-5:2017 Systèmes de détection de fuites - Partie 5 : exigences et méthodes d'essai/d'évaluation des systèmes de détection de fuites en citernes et des systèmes de tuyauterie sous pression
  • NF EN 13160-1:2017 Systèmes de détection de fuites - Partie 1 : principes généraux
  • NF A09-492*NF EN ISO 20485:2018 Non-destructive testing - Leak testing - Tracer gas method
  • NF EN ISO 20485:2018 Essais non destructifs - Contrôle d'étanchéité - Méthode par gaz traceur
  • NF EN 13184/A1:2004 Essais non destructifs - Contrôle d'étanchéité - Méthode par variation de pression
  • NF EN 13184:2001 Essais non destructifs - Contrôle d'étanchéité - Méthode par variation de pression
  • NF EN 1593/A1:2004 Essais non destructifs - Contrôle d'étanchéité - Contrôle à la bulle
  • NF EN 1593:1999 Essais non destructifs - Contrôle d'étanchéité - Contrôle à la bulle
  • NF EN ISO 18081:2016 Essais non destructifs - Contrôle par émissions acoustique - Détection de fuites par émission acoustique
  • NF EN 13160-7:2017 Systèmes de détection de fuites - Partie 7 : exigences et méthodes d'essai/d'évaluation pour les espaces interstitiels, les détecteurs de fuite des revêtements et les détecteurs de fuite d'enveloppes
  • NF A09-026*NF EN ISO 18081:2016 Non-destructive testing - Acoustic emission testing (AT) - Leak detection by means of acoustic emission
  • NF EN 1779/A1:2004 Essais non destructifs - Contrôle d'étanchéité - Critères de choix de la méthode et de la technique
  • NF EN 1779:1999 Essais non destructifs - Contrôle d'étanchéité - Critères de choix de la méthode et de la technique
  • NF ISO 16247:2006 Véhicules routiers - Détection des fuites du dispositif d'échappement - Méthode d'essai à l'hélium et spécification du dispositif de détection
  • NF A09-352:1987 Non-destructive testing. Acoustic emission. Recommended practice for leak detection.
  • NF E86-601-3*NF EN 13160-3:2017 Leak detection systems - Part 3 : requirements and test/assessment methods for liquid systems for tanks
  • NF EN 13160-3:2017 Systèmes de détection de fuites - Partie 3 : exigences et méthodes d'essai/d'évaluation des systèmes à liquide pour des réservoirs
  • NF EN 14291:2005 Solutions moussantes pour détection de fuites sur les installations de gaz
  • NF E86-601-2*NF EN 13160-2:2017 Leak detection systems - Part 2 : requirements and test/assessment methods for pressure and vacuum systems
  • NF EN 13160-2:2017 Systèmes de détection de fuites - Partie 2 : exigences et méthodes d'essai/d'évaluation des systèmes sous pression et à dépression
  • NF R10-022*NF ISO 16247:2006 Road vehicles - Detection of exhaust systems leaks - Helium test method and detection device specification
  • NF E86-601-4:2003 Leak detection systems - Part 4 : liquid and/or vapour sensor systems for use in leakage containments or interstitial spaces.
  • NF E86-601-5*NF EN 13160-5:2017 Leak detection systems - Part 5 : requirements and test/assessment methods for in-tank gauge systems and pressurised pipework systems
  • NF EN 2591-224:2008 Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 224 : fuite HF
  • NF L54-002-031*NF EN 2591-312:1998 Aerospace series. Elements of electrical and optical connection. Test methods. Part 312 : air leakage.
  • NF L54-002-224*NF EN 2591-224:2008 Aerospace series - Elements of electrical and optical connection - Test methods - Part 224 : RF leakage
  • NF E51-712*NF EN 15727:2010 Ventilation for buildings - Ducts and ductwork components, leakage classification and testing

US-FCR, Leak detection series

CEN - European Committee for Standardization, Leak detection series

  • EN ISO 20486:2018 Non-destructive testing - Leak testing - Calibration of reference leaks for gases
  • EN ISO 20485:2018 Non-destructive testing - Leak testing - Tracer gas method
  • PREN 16696-2013 Non-destructive testing - Acoustic emission - Leak detection by means of acoustic emission

International Organization for Standardization (ISO), Leak detection series

  • ISO 20486:2017 Non-destructive testing - Leak testing - Calibration of reference leaks for gases
  • ISO 20484:2017 Non-destructive testing - Leak testing - Vocabulary
  • ISO 20485:2017 Non-destructive testing - Leak testing - Tracer gas method
  • ISO/CD 18081 Non-destructive testing — Acoustic emission testing (AT) — Leak detection by means of acoustic emission
  • ISO/DIS 18081:2011 Non-destructive testing — Acoustic emission testing (AT) — Leak detection by means of acoustic emission
  • ISO 18081:2016 Non-destructive testing - Acoustic emission testing (AT) - Leak detection by means of acoustic emission
  • ISO 16247:2004 Road vehicles - Detection of exhaust system leaks - Helium test method and detection device specification
  • ISO/CD 6366:2023 Non-destructive testing — Leak testing — Radioactive tracer methods for pressured vessels and underground pipelines

ES-UNE, Leak detection series

  • UNE-EN ISO 20486:2018 Non-destructive testing - Leak testing - Calibration of reference leaks for gases (ISO 20486:2017)
  • UNE-EN ISO 20485:2018 Non-destructive testing - Leak testing - Tracer gas method (ISO 20485:2017)
  • UNE-EN ISO 18081:2017 Non-destructive testing - Acoustic emission testing (AT) - Leak detection by means of acoustic emission (ISO 18081:2016)
  • UNE 53968:2005 IN ERRATUM:2006 Standard procedures for the assessment of tightness verification and leak detection systems on installations for storaging of liquid oil products.

British Standards Institution (BSI), Leak detection series

  • BS EN 1518:1998 Non-destructive testing - Leak testing - Characterization of mass spectrometer leak detectors
  • BS EN 13160-4:2016 Tracked Changes. Leak detection systems. Requirements and test/assessment methods for sensor based leak detection systems
  • BS EN 13160-1:2016 Tracked Changes. Leak detection systems. General Principles
  • BS EN ISO 20484:2017 Non-destructive testing. Leak testing. Vocabulary
  • BS EN 13625:2002 Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage
  • BS EN 13625:2002(2007) Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage
  • BS EN 13160-7:2016 Tracked Changes. Leak detection systems. Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets
  • BS EN 13160-7:2003 Leak detection systems - General requirements and test methods for interstitial spaces, leak protecting linings and leak protecting jackets
  • BS ISO 16247:2004 Road vehicles. Detection of exhaust systems leaks. Helium test method and detection device specification
  • 16/30334714 DC BS EN ISO 20485. Non-destructive testing. Leak testing. Tracer gas method
  • 13/30291465 DC BS EN 16696. Non-destructive testing. Acoustic emission. Leak detection by means of acoustic emission
  • BS EN 13160-4:2003 Leak detection systems - Liquid and/or vapour sensor systems for use in leakage containments or interstitial spaces
  • BS EN 13160-3:2016 Tracked Changes. Leak detection systems. Requirements and test/assessment methods for liquid systems for tanks
  • BS EN 13160-2:2016 Tracked Changes. Leak detection systems. Requirements and test/assessment methods for pressure and vacuum systems
  • BS ISO 16247:2006 Road vehicles - Detection of exhaust systems leaks - Helium test method and detection device specification
  • BS EN 50724:2023 Fixed Ultrasonic Gas Leak Detectors (UGLD). General requirements and test methods
  • BS EN 13160-5:2016 Tracked Changes. Leak detection systems. Requirements and test/assessment methods for in-tank gauge systems and pressurised pipework systems
  • 22/30447524 DC BS EN 50724. Fixed Ultrasonic Gas Leak Detectors (UGLD). General requirements and test methods
  • BS EN 2591-224:2007 Aerospace series - Elements of electrical and optical connection - Test methods - Part 224: RF leakage
  • BS EN 13160-6:2003 Leak detection systems - Sensors in monitoring wells
  • BS EN 13160-6:2016 Leak detection systems. Sensors in monitoring wells

HU-MSZT, Leak detection series

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Leak detection series

  • GB/T 12604.7-2014 Non-destructive testing.Terminology.Terms used in leak testing
  • GB/T 12604.7-1995 Terminology for nondestructive testing--Leak testing
  • GB/T 32074-2015 Non-destructive testing.Test method for ammonia leak testing
  • GB/T 15823-2009 Non-destructive testing-Test methods for helium leak testing
  • GB/T 25448-2010 Helium leak testing of PHWR nuclear fuel bundles
  • GB/T 30040.5-2013 Leak detection systems.Part 5:Tank gauge leak detection systems
  • GB 19344-2003 Technique requirement and test method of leaking-safety of gas supply system on using gas vehicle
  • GB/T 25757-2010 Non-destructive testing.Test methods of performance characteristics of automatic magnetic flux leakage testing systems for steel tubes

Korean Agency for Technology and Standards (KATS), Leak detection series

  • KS B ISO 20484:2020 Non-destructive testing — Leak testing — Vocabulary
  • KS R ISO 16247-2006(2016) Road vehicles-Detection of exhaust system leaks-Helium test method and detection device specification
  • KS R ISO 16247-2006(2021) Road vehicles-Detection of exhaust system leaks-Helium test method and detection device specification
  • KS A 0083-2013(2018) Mass spectrometer(type leak) detector general rules for calibration system
  • KS C IEC 61250-2006(2016) Nuclear reactors-Instrumentation and control systems important for safety-Detection of leakage in coolant systems
  • KS C IEC 61250:2006 Nuclear reactors-Instrumentation and control systems important for safety-Detection of leakage in coolant systems
  • KS R ISO 16247:2006 Road vehicles-Detection of exhaust system leaks-Helium test method and detection device specification
  • KS V 7750-2020 Procedure of refrigerant leakage detection test for air conditioning,cooling and heating equipment in accommodation
  • KS R 1168-2009 Test method of refrigerant leakage rates from mobile air conditioning system
  • KS B 5648-2002(2017) Pressure test method and vacuum vessel leak detection methodusing mass spectrometer
  • KS C IEC 61250-2006(2021) Nuclear reactors-Instrumentation and control systems important for safety-Detection of leakage in coolant systems
  • KS B 5648-2002(2022) Pressure test method and vacuum vessel leak detection methodusing mass spectrometer

KR-KS, Leak detection series

国家市场监督管理总局、中国国家标准化管理委员会, Leak detection series

  • GB/T 12604.7-2021 Non-destructive testing—Terminology—Leak testing
  • GB/T 40336-2021 Non-destructive testing—Leak testing—Calibration of reference leaks for gases
  • GB/T 33643-2022 Non-destructive testing—Test methods for leak detection by means of acoustic emission
  • GB/T 40335-2021 Non-destructive testing—Leak testing—Tracer gas method

Shandong Provincial Standard of the People's Republic of China, Leak detection series

  • DB37/T 1879-2011 Acoustic emission detection code for leaks in pressurized systems

European Committee for Standardization (CEN), Leak detection series

  • EN 1518:1998 Non-destructive testing - Leak testing - Characterization of mass spectrometer leak detectors
  • EN 13184:2001 Non-destructive testing - Leak testing - Pressure change method
  • EN 13625:2001 Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage
  • prEN ISO 18081 rev Non-destructive testing — Acoustic emission testing (AT) — Leak detection by means of acoustic emission
  • EN ISO 20484:2017 Non-destructive testing - Leak testing - Vocabulary
  • EN 13160-4:2016 Leak detection systems - Part 4: Requirements and test/assessment methods for sensor based leak detection systems
  • EN 13184:2003 Non-Destructive Testing - Leak Testing - Pressure Change Method (Incorporates Amendment A1: 2003)
  • EN ISO 18081:2016 Non-destructive testing - Acoustic emission testing (AT) - Leak detection by means of acoustic emission (ISO 18081:2016)
  • EN 13160-2:2016 Leak detection systems - Part 2: Requirements and test/assessment methods for pressure and vacuum systems
  • EN 13160-4:2003 Leak detection systems - Part 4: Liquid and/or vapour sensor systems for use in leakage containments or interstitial spaces
  • EN 2591-224:2007 Aerospace series - Elements of electrical and optical connection - Test methods - Part 224: RF leakage

Society of Automotive Engineers (SAE), Leak detection series

  • SAE J2298-2011 Ultraviolet Leak Detection: Procedure for Use of Refrigerant leak Detection Dyes for Service of Mobile Air-Conditioning Systems
  • SAE J1267-1988 Leakage Testing, Information Report;
  • SAE J2298-1996 Ultraviolet Leak Detection: Procedure for Use of Refrigerant Leak Detection Dyes for Service of Mobile Air-Conditioning Systems
  • SAE J2297-1996 Ultraviolet Leak Detection: Stability and Compatibility Criteria of Fluorescent Refrigerant Leak Detection Dyes for Mobile R-134a Air- Conditioning Systems, Standard September 1996
  • SAE J1628-2014 Technician Procedures for Refrigerant Leak Detection in Service of Mobile Air Conditioning Systems
  • SAE J2297-2011 Ultraviolet Leak Detection: Stability and Compatibility Criteria of Fluorescent Refrigerant Leak Detection Dyes for Mobile R-134a and R-1234yf (HFO-1234yf) Air- Conditioning Systems
  • SAE J2297-2013 Ultraviolet Leak Detection: Stability and Compatibility Criteria of Fluorescent Refrigerant Leak Detection Dyes for Mobile R-134a and R-1234yf (HFO-1234yf) Air- Conditioning Systems
  • SAE J2772-2011 Measurement of Passenger Compartment Refrigerant Concentrations Under System Refrigerant Leakage Conditions

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Leak detection series

  • GB/T 34637-2017 Non-destructive testing—Test methods for bubble leak detection
  • GB/T 34638-2017 Non-destructive testing—Test methods for ultrasonic leak detection
  • GB/T 33643-2017 Non-destructive testing—Test methods for leak detection by means of acoustic emission

SAE - SAE International, Leak detection series

  • SAE J1267-1979 Leakage Testing
  • SAE J1267-1984 Leakage Testing@ Information Report;
  • SAE J1267-2018 Leakage Testing
  • SAE J1628-2011 Technician Procedures for Refrigerant Leak Detection in Service of Mobile Air Conditioning Systems
  • SAE J1628-2020 Technician Procedures for Refrigerant Leak Detection in Service of Mobile Air Conditioning Systems
  • SAE J1628-1993 Technician Procedure for Using Electronic Refrigerant Leak Detectors for Service of Mobile Air-Conditioning Systems
  • SAE J2772-2019 Measurement of Passenger Compartment Refrigerant Concentrations Under System Refrigerant Leakage Conditions

API - American Petroleum Institute, Leak detection series

  • API PUBL 346-1998 Results of Range-Finding Testing of Leak Detection and Leak Location Technologies for Underground Pipelines
  • API PUBL 4716-2002 Buried Pressurized Piping Systems Leak Detection Guide
  • API PUBL 325-1994 Evaluation of a Methodology for the Detection of Leaks in Aboveground Storage Tanks
  • API PUBL 1155-1995 Evaluation Methodology for Software Based Leak Detection Systems (First Edition)
  • API PUBL 307-1991 An Engineering Assessment of Acoustic Methods of Leak Detection in Aboveground Storage Tanks
  • API PUBL 322-1994 Engineering Evaluation of Acoustic Methods of Leak Detection in Aboveground Storage Tanks
  • API PUBL 307-1992 Engineering Assessment of Acoustic Methods of Leak Detection in Aboveground Storage Tanks
  • API PUBL 323-1994 Engineering Evaluation of Volumetric Methods of Leak Detection in Aboveground Storage Tanks
  • API PUBL 340-1997 Liquid Release Prevention and Detection Measures for Aboveground Storage Facilities
  • API PUBL 306-1991 An Engineering Assessment of Volumetric Methods of Leak Detection in Aboveground Storage Tanks
  • API RP 1175-2015 Pipeline Leak Detection - Program Management (FIRST EDITION; ERTA: March 2017)
  • API SMART LEAK-2004 Smart Leak Detection and Repair (LDAR) for Control of Fugitive Emissions
  • API TR 1149-2015 Pipeline Variable Uncertainties and Their Effects on Leak Detectability (SECOND EDITION)
  • API PUBL 1149-1993 Pipeline Variable Uncertainties and Their Effects on Leak Detectability (First Edition)

GB-REG, Leak detection series

未注明发布机构, Leak detection series

GM North America, Leak detection series

Group Standards of the People's Republic of China, Leak detection series

  • T/QGCML 1755-2023 Anti-leak detection function rotary joint
  • T/CATSI 02010-2022 Method for Helium leak?detection of gas cylinders
  • T/CNEA 103.8-2021 PWR pressure boundary components—Non-destructive testing— Part8:Leak testing
  • T/CAMS /CICEIA24-2019 Reciprocating internal combustion engine-Turbocharger- Method for leakage-measurement
  • T/AVS 003-2020 Specification for selection of leak detection methods for vacuum components of fusion devices
  • T/ACEF 003-2020 Guidelines for the audit and evaluation of volatile organic compounds Leak Detection and Repair projects
  • T/CEC 540-2021 Guidelines for Operation and Maintenance of Hydrogen Leakage Online Monitoring and Alarm System in Power Plants
  • T/CMES 16003-2021 Hydrogen pressure cycle test and leak/penetration test method of high-pressure hydrogen storage system for vehicles

Indonesia Standards, Leak detection series

  • SNI 18-6937-2002 Radioactive materials - Packaging - Tests for content leakage and radiation leakage

American Society for Testing and Materials (ASTM), Leak detection series

  • ASTM E1066-95(2006) Standard Test Method for Ammonia Colorimetric Leak Testing
  • ASTM E432-91(2017)e1 Standard Guide for Selection of a Leak Testing Method
  • ASTM E432-91(2022) Standard Guide for Selection of a Leak Testing Method
  • ASTM E432-91(2004) Standard Guide for Selection of a Leak Testing Method
  • ASTM E499-95(2000) Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode
  • ASTM E499/E499M-11(2017) Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode
  • ASTM E4-08 Standard Practices for Force Verification of Testing Machines
  • ASTM E4-09 Standard Practices for Force Verification of Testing Machines
  • ASTM E4-09a Standard Practices for Force Verification of Testing Machines
  • ASTM E2024/E2024M-11(2019) Standard Practice for Atmospheric Leaks Using a Thermal Conductivity Leak Detector
  • ASTM E2024/E2024M-11 Standard Practice for Atmospheric Leaks Using a Thermal Conductivity Leak Detector
  • ASTM E427-95(2000) Standard Practice for Testing for Leaks Using the Halogen Leak Detector (Alkali-Ion Diode)
  • ASTM E499/E499M-11 Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode
  • ASTM D3923-94(1998) Standard Practices for Detecting Leaks in Reverse Osmosis Devices
  • ASTM E493/E493M-11(2022) Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode
  • ASTM E493/E493M-11(2017) Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode
  • ASTM E515-11 Standard Practice for Leaks Using Bubble Emission Techniques
  • ASTM E1603/E1603M-11(2017) Standard Practice for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode
  • ASTM D7877-22 Standard Guide for Electronic Methods for Detecting and Locating Leaks in Waterproof Membranes
  • ASTM D3923-23 Standard Practices for Detecting Leaks in Reverse Osmosis and Nanofiltration Devices
  • ASTM D3923-08 Standard Practices for Detecting Leaks in Reverse Osmosis and Nanofiltration Devices
  • ASTM E498-95(2006) Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode
  • ASTM F3287-17 Standard Test Method for Nondestructive Detection of Leaks in Packages by Mass Extraction Method
  • ASTM F3287-17e1 Standard Test Method for Nondestructive Detection of Leaks in Packages by Mass Extraction Method
  • ASTM E498-95(2000) Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode
  • ASTM E498/E498M-11(2017) Standard Practice for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode
  • ASTM E498/E498M-11(2022) Standard Practice for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode
  • ASTM D7877-14 Standard Guide for Electronic Methods for Detecting and Locating Leaks in Waterproof Membranes
  • ASTM E1186-22 Standard Practices for Air Leakage Site Detection in Building Envelopes and Air Barrier Systems
  • ASTM F2096-11 Standard Test Method for Detecting Gross Leaks in Packaging by Internal Pressurization (Bubble Test)
  • ASTM E1603/E1603M-11(2022) Standard Practice for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode
  • ASTM E1554-94 Standard Test Methods for Determining External Air Leakage of Air Distribution Systems by Fan Pressurization
  • ASTM F1929-98 Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration
  • ASTM F1929-98(2004) Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration
  • ASTM G188-05(2017) Standard Specification for Leak Detector Solutions Intended for Use on Brasses and Other Copper Alloys
  • ASTM F3039-23 Standard Test Method for Detecting Leaks in Nonporous Packaging or Flexible Barrier Materials by Dye Penetration
  • ASTM F1929-15 Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration
  • ASTM F2338-09(2020) Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method
  • ASTM D7392-20 Standard Practice for PM Detector and Bag Leak Detector Manufacturers to Certify Conformance with Design and Performance Specifications for Cement Plants
  • ASTM F2164-18 Standard Practice for Field Leak Testing of Polyethylene (PE) and Crosslinked Polyethylene (PEX) Pressure Piping Systems Using Hydrostatic Pressure
  • ASTM F2786-16(2021) Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Gaseous Testing Media Under Pressure (Pneumatic Leak Testing)
  • ASTM F2096-02e1 Standard Test Method for Detecting Gross Leaks in Medical Packaging by Internal Pressurization (Bubble Test)
  • ASTM F2096-02 Standard Test Method for Detecting Gross Leaks in Medical Packaging by Internal Pressurization (Bubble Test)
  • ASTM F2096-01e1 Standard Test Method for Detecting Gross Leaks in Medical Packaging by Internal Pressurization (Bubble Test)
  • ASTM F2096-04 Standard Test Method for Detecting Gross Leaks in Medical Packaging by Internal Pressurization (Bubble Test)
  • ASTM E1211/E1211M-12 Standard Practice for Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors
  • ASTM F2096-01 Standard Test Method for Detecting Gross Leaks in Medical Packaging by Internal Pressurization (Bubble Test)
  • ASTM E1211/E1211M-17 Standard Practice for Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors
  • ASTM F2096-11(2019) Standard Test Method for Detecting Gross Leaks in Medical Packaging by Internal Pressurization (Bubble Test)
  • ASTM E1554/E1554M-13(2023) Standard Test Methods for Determining Air Leakage of Air Distribution Systems by Fan Pressurization
  • ASTM F3169-16 Standard Test Method for Leak Detection in Blister Packaging by Vacuum Deflection Method by Laser Measurement
  • ASTM F303-78(1996) Standard Practices for Sampling Aerospace Fluids from Components
  • ASTM F3039-13 Standard Test Method for Detecting Leaks in Nonporous Packaging or Flexible Barrier Materials by Dye Penetration
  • ASTM F3039-15 Standard Test Method for Detecting Leaks in Nonporous Packaging or Flexible Barrier Materials by Dye Penetration
  • ASTM F303-08(2016) Standard Practices for Sampling for Particles in Aerospace Fluids and Components

National Metrological Verification Regulations of the People's Republic of China, Leak detection series

  • JJG 843-1993 Verification Regulation of Leakage Current Instrument and Meter
  • JJG 776-1992 Venification Regulation of Microwave Radiation and Leakage Energy Measuring Instrument

Japanese Industrial Standards Committee (JISC), Leak detection series

Professional Standard - Energy, Leak detection series

  • NB/T 47013.8-2012 Nondestructive testing of pressure equipments.Part 8:Leak Testing
  • NB/T 20003.8-2010 Non-destructive testing for mechanical components in nuclear island of nuclear power plants-Part 8: Leak testing
  • NB/T 20003.8-2021 Non-destructive testing of nuclear island machinery and equipment in nuclear power plants Part 8: Leakage testing
  • NB/T 20254-2013 Criteria for nuclear power plant reactor coolant system leakage detection

American Nuclear Society (ANS), Leak detection series

ANS - American Nuclear Society, Leak detection series

  • 56.8-1994 Containment System Leakage Testing Requirements
  • 56.8-2002 Containment System Leakage Testing Requirements
  • 56.8-1981 CONTAINMENT SYSTEM LEAKAGE TESTING REQUIREMENTS
  • 56.8-1987 CONTAINMENT SYSTEM LEAKAGE TESTING REQUIREMENTS

American Petroleum Institute (API), Leak detection series

Professional Standard - Aerospace, Leak detection series

  • QJ 1610-1989 Classification of valve gas leakage rate and its detection
  • QJ 3281-2006 Detection method of spacecraft propellant leakage at launch site

Military Standard of the People's Republic of China-General Armament Department, Leak detection series

  • GJB 5848-2006 Detection methods of propellant leak for satellite on launching site

Professional Standard - Urban Construction, Leak detection series

  • CJJ/T 215-2014 Technical specification for leak detection of city gas piping system
  • CJJ/T 254-2016 Technical specification for leakage surveillance system of directly buried heating pipe

American Society of Mechanical Engineers (ASME), Leak detection series

Professional Standard - Electricity, Leak detection series

Professional Standard - Aviation, Leak detection series

  • HB 8424-2014 Leak test method for sealing of aviation components

ISA - International Society of Automation, Leak detection series

  • ISA 67.03-1982 Light Water Reactor Coolant Pressure Boundary Leak Detection

国家能源局, Leak detection series

  • SY/T 6826-2022 Technical specifications for oil pipeline leakage monitoring systems
  • NB/T 20464-2017 In-service helium leakage detection of heat transfer tubes in nuclear power plant steam generators
  • SY/T 7341-2016 Recommended practices for selection and application of underwater leak detection systems
  • NB/Z 20254-2013 Guidelines for Leak Detection of Reactor Coolant Systems in Nuclear Power Plants

International Electrotechnical Commission (IEC), Leak detection series

  • IEC 61250:1994 Nuclear reactors; instrumentation and control systems important for safety; detection of leakage in coolant systems

American National Standards Institute (ANSI), Leak detection series

BELST, Leak detection series

  • STB 34.101.76-2017 Information technology. Security techniques. Systems to detect and prevent leaks from information systems. General requirements

RU-GOST R, Leak detection series

  • PNST 526-2021 Petroleum and natural gas industry. Subsea production systems. Offshore leak detection. Methodology guide

Taiwan Provincial Standard of the People's Republic of China, Leak detection series

  • CNS 13181-7-1995 The Method of Test of Leakages Testing Procedures for LGP Automobile Fuel Systems
  • CNS 13181.7-1995 The Method of Test of Leakages Testing Procedures for LGP Automobile Fuel Systems

Professional Standard - Commodity Inspection, Leak detection series

  • SN/T 2745-2010 Test method for non-destructive detection of leaks in medical packaging trays.CO tracer gas method

Professional Standard - Environmental Protection, Leak detection series

  • HJ 1230-2021 Technical Guidelines for Detection and Repair of Volatile Organic Compound Leakage in Industrial Enterprises
  • HJ 733-2014 Guideline for the determination of volatile organic compound leaks and uncovered liquid surface emissions

Henan Provincial Standard of the People's Republic of China, Leak detection series

  • DB41/T 2364-2022 Technical specifications for detection and repair of volatile organic compounds in industrial enterprises

European Committee for Electrotechnical Standardization(CENELEC), Leak detection series

  • EN 50724:2023 Fixed Ultrasonic Gas Leak Detectors (UGLD) - General requirements and test methods

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Leak detection series

  • ASHRAE 215-2018 Method of Test to Determine Leakage of Operating HVAC Air Distribution Systems
  • ASHRAE 3961-1996 Leakage and Blockage Detection in Water Network of District Heating System

Professional Standard - Nuclear Industry, Leak detection series

  • EJ/T 889-1994 General Requirements for Leak Detection Instruments of PWR Coolant System
  • EJ/T 20150.10-2018 Post-irradiation inspection of pressurized water reactor bundle fuel assemblies-Part 10: Bubble method for fuel rod leak detection
  • EJ/T 20150.11-2018 Post-irradiation Inspection of PWR Bundle Fuel Assemblies Part 11: Helium Mass Spectrometry for Fuel Rod Leakage Detection
  • EJ/T 20150.12-2018 Post-irradiation inspection of PWR rod-bundle fuel assemblies-Part 12: Fuel rod leak detection end compression method

Professional Standard - Railway, Leak detection series

  • TB/T 2293-1991 150, 450MHz railway train wireless repeater, leaky coaxial cable standard series and main technical conditions

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Leak detection series

  • PREN 2591-224-2005 Aerospace series Elements of electrical and optical connection Test methods Part 224: RF leakage (Edition P 1)
  • PREN 2591-C12-1992 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part C12 - Air Leakage (Issue P 1)

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Leak detection series

Jiangsu Provincial Standard of the People's Republic of China, Leak detection series

  • DB32/T 4486-2023 Gasket coefficient (m) and specific pressure (y) test method based on leakage rate

National Metrological Technical Specifications of the People's Republic of China, Leak detection series

  • JJF(石化) 033-2020 Calibration Specification for Portable Volatile Organic Compounds Leak Detector (Hydrogen Flame Ion Method)
  • JJF(石化)033-2020 Calibration Specification for Portable Volatile Organic Compounds Leak Detector (Hydrogen Flame Ion Method)

AT-ON, Leak detection series

  • ONORM B 2538 Teil.2-1987 Long-distance and district-supply pipelines in water supply Systems; pipe-laying and testing for leaks

Professional Standard - Medicine, Leak detection series

  • YY/T 0681.5-2010 Test methods for sterile medical device package.Part 5 :Detecting gross leaks in medical packaging by internal pressurization (bubble test)

Aerospace, Security and Defence Industries Association of Europe (ASD), Leak detection series

  • ASD-STAN PREN 2591-224-2005 Aerospace series Elements of electrical and optical connection Test methods Part 224: RF leakage (Edition P 1)

Underwriters Laboratories (UL), Leak detection series





Copyright ©2007-2023 ANTPEDIA, All Rights Reserved