ZH
RU
ES

Orientation Material

Orientation Material, Total:500 items.

In the international standard classification, Orientation Material involves: Magnetic materials, Reinforced plastics, Rubber and plastics products, Photography, Waxes, bituminous materials and other petroleum products, Quality, Welding, brazing and soldering, Fertilizers, Plastics, Testing of metals, Insulating materials, Inorganic chemicals, Conducting materials, Construction materials, Test conditions and procedures in general, Products of the chemical industry, Biology. Botany. Zoology, Nuclear energy engineering, Mechanical testing, Mining and quarrying, Paints and varnishes, Products of non-ferrous metals, ELECTRICAL ENGINEERING, Refractories, Services, Paint ingredients, Rubber, Miscellaneous domestic and commercial equipment, Raw materials for rubber and plastics, Leather technology, Road engineering, Wastes, Powder metallurgy, TESTING, Fluid power systems, Electricity. Magnetism. Electrical and magnetic measurements, Air quality, Semiconducting materials, Materials for the reinforcement of composites, Tobacco, tobacco products and related equipment, Protection against fire, Non-metalliferous minerals, Metalliferous minerals, Products of the textile industry, Fluid storage devices, Radiation protection, Materials for aerospace construction, Space systems and operations, Protective equipment, Fuels, Analytical chemistry, Vocabularies, Tunnel construction, Paper products, Manufacturing forming processes, Pipeline components and pipelines.

SE-SIS, Orientation Material

SIS SS 03 12 14-1987 Flexible materials - Code for stating of reeling direction and prirtt orientation
SIS SS 424 11 02-1978 Overhead line material — Unilateral catch arms, type FE
SIS SS 11 26 22-1983 Metallic materials - Wire - Reverse bend test
SIS SS 11 26 23-1983 Metallic materials - Strip. Sheet - Reverse bend test

International Electrotechnical Commission (IEC), Orientation Material

IEC 60404-8-7:1988 Magnetic materials. Part 8: Specifications for individual materials. Section Seven - Specification for grain-oriented magnetic steel sheet and strip
IEC 60371-3-1:1984 Specification for insulating materials based on mica. Part 3 : Specifications for individual materials. Sheet 1 : Commutator separators and materials
IEC 60371-3-1:2006 Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 1: Commutator separators and materials
IEC 60404-8-7:2020 Magnetic materials - Part 8-7: Specifications for individual materials - Cold-rolled grain-oriented electrical steel strip and sheet delivered in the fully processed state
IEC 60404-8-7:2020 RLV Magnetic materials - Part 8-7: Specifications for individual materials - Cold-rolled grain-oriented electrical steel strip and sheet delivered in the fully-processed state
IEC 60404-8-7:2017 RLV Magnetic materials - Part 8-7: Specifications for individual materials - Cold-rolled grain-oriented electrical steel strip and sheet delivered in the fully processed state
IEC 60404-8-4:2022 RLV Magnetic materials - Part 8-4: Specifications for individual materials - Cold-rolled non-oriented electrical steel strip and sheet delivered in the fully-processed state
IEC 60404-8-4:2022 Magnetic materials - Part 8-4: Specifications for individual materials - Cold-rolled non-oriented electrical steel strip and sheet delivered in the fully-processed state
IEC 60674-3-1:2011 Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors
IEC 60404-8-1:2001 Magnetic materials - Part 8-1: Specifications for individual materials; Magnetically hard materials
IEC 60404-8-1:2004 Magnetic materials - Part 8-1: Specifications for individual materials - Magnetically hard materials
IEC 60404-8-1:2001+AMD1:2004 CSV Magnetic materials - Part 8-1: Specifications for individual materials - Magnetically hard materials
IEC 60404-8-1:2015 Magnetic materials - Part 8-1: Specifications for individual materials - Magnetically hard materials
IEC 60674-3-1:1998+AMD1:2011 CSV Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) films for capacitors
IEC 60674-3-1:2021 RLV Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors
IEC 60674-3-1:2021 Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors

British Standards Institution (BSI), Orientation Material

BS IEC 60404-8-7:2020 Magnetic materials - Specifications for individual materials. Cold-rolled grain-oriented electrical steel strip and sheet delivered in the fully-processed state
BS ISO 15987:2003 Plastics - Film and sheeting - Biaxially oriented polyamide (nylon) films
BS EN 1482:1996 Sampling of solid fertilizers and liming materials
BS ISO 7800:2012 Metallic materials. Wire. Simple torsion test
BS ISO 15988:2003 Plastics - Film and sheeting - Biaxially oriented poly(ethylene terephthalate) (PET) films
BS ISO 8007-3:2005 Carbonaceous materials used in the production of aluminium - Sampling plans and sampling from individual units - Sidewall blocks
BS EN 60674-3-1:1998+A1:2011 Plastic films for electrical purposes. Specifications for individual materials. Sheet 1: Biaxially oriented polypropylene (PP) films for capacitors
15/30334738 DC BS EN 60404-8-7. Magnetic materials. Part 8-7. Specifications for individual materials. Cold-rolled grain-oriented electrical steel strip and sheet delivered in the fully processed state
18/30383939 DC BS IEC 60404-8-7. Magnetic materials. Part 8-7. Specifications for individual materials. Cold-rolled grain-oriented electrical steel strip and sheet delivered in the fully processed state
BS EN 1482-3:2016 Fertilizers and liming materials. Sampling and sample preparation. Sampling of static heaps
20/30403969 DC BS IEC 60404-8-4. Magnetic materials. Part 8-4. Specifications for individual materials. Cold-rolled non-oriented electrical steel strip and sheet delivered in the fully-processed state
21/30435690 DC BS IEC 60404-8-4. Magnetic materials. Part 8-4. Specifications for individual materials. Cold-rolled non-oriented electrical steel strip and sheet delivered in the fully-processed state
BS EN ISO 7799:2000 Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test
BS EN 60371-3-1:2006 Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 1: Commutator separators and materials
BS 6404-8.1:2001 Magnetic materials - Individual materials - Magnetically hard materials
BS ISO 15024:2023 Fibre-reinforced plastic composites. Determination of mode I interlaminar fracture toughness, GIC, for unidirectionally reinforced materials
BS ISO 14624-1:2023 Space systems. Safety and compatibility of materials - Determination of upward flammability of materials
BS EN 60404-8-1:2015 Magnetic materials. Specifications for individual materials. Magnetically hard materials
BS ISO 22262-1:2012 Air quality. Bulk materials. Sampling and qualitative determination of asbestos in commercial bulk materials
BS ISO 9649:2023 Metallic materials. Wire. Reverse torsion test
BS EN 13459:2011 Road marking materials. Sampling from storage and testing
BS EN 1413:1998 Textiles - Determination of pH of aqueous extract
BS EN ISO 10564:1997 Soldering and brazing materials - Methods for the sampling of soft solders for analysis
BS EN 60404-8-6:2009 Magnetic materials. Specifications for individual materials. Soft magnetic metallic materials
BS EN 875:1995 Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination
BS EN ISO 9016:2012 Destructive tests on welds in metallic materials. Impact tests. Test specimen location, notch orientation and examination
BS EN ISO 9016:2011 Destructive tests on welds in metallic materials. Impact tests. Test specimen location, notch orientation and examination
BS EN ISO 10350-1:2017 Plastics. Acquisition and presentation of comparable single-point data. Moulding materials
BS ISO 15024:2002 Fibre-reinforced plastic composites. Determination of mode I interlaminar fracture toughness, $iGic, for unidirectionally reinforced materials
BS EN ISO 1927-2:2012 Monolithic (unshaped) refractory products. Sampling for testing
BS EN ISO/ASTM 52903-1:2021 Additive manufacturing. Material extrusion-based additive manufacturing of plastic materials - Feedstock materials
BS EN ISO/ASTM 52903-2:2020 Additive manufacturing. Material extrusion based additive manufacturing of plastic materials. Process equipment
BS EN ISO 14126:1999 Fibre-reinforced plastic composites. Determination of compressive properties in the in-plane direction
BS EN IEC 60404-17:2021 Magnetic materials - Methods of measurement of the magnetostriction characteristics of grain-oriented electrical steel strip and sheet by means of a single sheet tester and an optical sensor
BS EN ISO 14344:2010 Welding consumables - Procurement of filler materials and fluxes
BS ISO 1099:2017 Metallic materials. Fatigue testing. Axial force-controlled method
BS ISO 12106:2017 Metallic materials. Fatigue testing. Axial-strain-controlled method

YU-JUS, Orientation Material

JUS C.X5.048-1990 Magnetic staterials. Specifications for individual materials. Specification for cold-rolled non-oriented magnetic steel sheet and strip
JUS B.B0.001-1984 Natural aggregates and stone. Sampling
JUS H.C8.030-1989 Rav materials for paints and varnishes. Sampling
JUS C.N2.001-1986 Sintered metal materials, excluding hardmetals — Sampling

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Orientation Material

GB/T 30967-2014 Practice for fiber reinforcement orientation codes for composite materials
GB/T 5021-2002 Commutator separators and materials
GB/T 1427-2016 Sample method of carbon material
GB/T 1427-2000 Sample method of carbon material
GB/T 17617-1998 Refractory products--Sampling of raw materials and unshaped products
GB/T 5019.3-2009 Specification for insulating materials based on mica.Part 3:Commutator separators and materials
GB 9285-1988 Raw materials for paints and varnishes--Sampling
GB/T 28891-2012 Fibre-reinforced plastic composites.Determination of mode I interlaminar fracture toughness G<下标IC> for unidirectionally reinforced materials
GB/T 27793-2011 Beater addition non-asbestos gasket materials
GB/T 239.2-2023 Wire rods of metallic materials - Part 2: Test methods for bidirectional torsion
GB/T 239.1-2023 Wire rods of metallic materials - Part 1: Test method for unidirectional torsion
GB/T 239.1-2012 Metallic materials.Wire.Part 1:Simple torsion test
GB/T 239.2-2012 Metallic materials.Wire.Part 2:Reverse torsion test
GB/T 38719-2020(英文版) Metallic materials Tube Determination of biaxial stress strain curve of tube by hydro bulging test
GB/T 32976-2016 Test method for transverse bending of tubes of metallic materials
GB/T 41791-2022 Plastics—Film and sheeting—Non-oriented poly(ethylene terephthalate) (PET) sheets
GB/T 25043-2010 Multiaxial warp-knitted reinforcement for resin-matrix prepreg
GB/T 13760-2009 Geosynthetics.Sampling and preparation of test specimens
GB/T 6671-2001 Thermoplastics pipes-Determination of longitudinal reversion
GB/T 13891-2008 Test methods of specular gloss for decorative building materials
GB/T 3075-2008 Metallic materials.Fatigue testing.Axial-forece-controlled method
GB/T 43111-2023 Axial force control method for fatigue testing of carbon materials

International Organization for Standardization (ISO), Orientation Material

ISO 15987:2003 Plastics - Film and sheeting - Biaxially oriented polyamide (nylon) films
ISO 10564:1993 Soldering and brazing materials; methods for the sampling of soft solders for analysis
ISO 7800:2003 Metallic materials - Wire - Simple torsion test
ISO 7800:2012 Metallic materials - Wire - Simple torsion test
ISO 7800:1984 Metallic materials; Wire; Simple torsion test
ISO/CD 7801 Metallic materials — Wire — Reverse bend test
ISO 9649:2023 Metallic materials — Wire — Reverse torsion test
ISO/DIS 7801:2023 Metallic materials — Wire — Reverse bend test
ISO 15988:2003 Plastics - Film and sheeting - Biaxially oriented poly(ethylene terephthalate) (PET) films
ISO 8007-1:1999 Carbonaceous materials used in the production of aluminium - Sampling plans and sampling from individual units - Part 1: Cathode blocks
ISO 8007-3:2003 Carbonaceous materials used in the production of aluminium - Sampling plans and sampling from individual units - Part 3: Sidewall blocks
ISO 8007-2:1999 Carbonaceous materials used in the production of aluminium - Sampling plans and sampling from individual units - Part 2: Prebaked anodes
ISO 14820-1:2016 Fertilizers and liming materials - Sampling and sample preparation - Part 1: Sampling
ISO 842:1974 Raw materials for paints and varnishes — Sampling
ISO 14422:1999 Carbonaceous materials used in the production of aluminium - Cold-ramming pastes - Methods of sampling
ISO 8656-1:1988 Refractory products; sampling of raw materials and unshaped products; part 1: sampling scheme
ISO 14820-3:2020 Fertilizers and liming materials — Sampling and sample preparation — Part 3: Sampling of static heaps
ISO 7799:1985 Metallic materials; Sheet and strip 3 mm thick or less; Reverse bend test
ISO 4874:1981 Tobacco - Sampling of batches of raw material - General principles
ISO 20978:2020 Liming material — Determination of neutralizing value — Titrimetric methods
ISO 1099:2006 Metallic materials - Fatigue testing - Axial force-controlled method
ISO 1099:2017 Metallic materials - Fatigue testing - Axial force-controlled method
ISO 14624-1:2003 Space systems - Safety and compatibility of materials - Part 1: Determination of upward flammability of materials
ISO 6257:1980 Carbonaceous materials used in the production of aluminium; Pitch for electrodes; Sampling
ISO 6375:1980 Carbonaceous materials for the production of aluminium; Cokes for electrodes; Sampling
ISO/DIS 9862 Geosynthetics — Sampling and preparation of test specimens
ISO/FDIS 14624-1 Space systems — Safety and compatibility of materials — Part 1: Determination of upward flammability of materials
ISO/DIS 14624-1 Space systems — Safety and compatibility of materials — Part 1: Determination of upward flammability of materials
ISO 14624-1:2023 Space systems — Safety and compatibility of materials — Part 1: Determination of upward flammability of materials
ISO 14126:1999 Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction
ISO 12106:2003 Metallic materials - Fatigue testing - Axial-strain-controlled method
ISO 22407:2021 Metallic materials — Fatigue testing — Axial plane bending method
ISO 12106:2017 Metallic materials - Fatigue testing - Axial-strain-controlled method

BR-ABNT, Orientation Material

ABNT MB-269-1963

IT-UNI, Orientation Material

UNI 4901-1962
UNI 5819-1966
UNI 4908-1970
UNI 7701-1977
UNI 4269-1959
UNI 4271-1960
UNI 4272-1959
UNI 4278-1959
UNI 7410-1975
UNI 5253-1963
UNI 7219-1973
UNI 4270-1959
UNI 6323-1968
UNI 4909-1962
UNI 5642-1965
UNI 4281-1959
UNI 6453-1969
UNI 5802-1966
UNI S 193-1943
UNI 4287-1959
UNI 4301-1959
UNI 4299-1959
UNI 4290-1959
UNI 4292-1959
UNI 4298-1959
UNI 4296-1959
UNI 4300-1959
UNI 4293-1959
UNI 4297-1959
UNI 4267-1959
UNI 5967-1967
UNI 4268-1959
UNI EN ISO/ASTM 52903-1:2021 Additive manufacturing - Material extrusion-based additive manufacturing of plastic materials - Part 1: Feedstock materials
UNI 6061-1967
UNI 5641-1965

VN-TCVN, Orientation Material

TCVN 4641-1988 Sintered materials.Sampling
TCVN 1827-2006 Metallic materials.wire.Simple torsion test
TCVN 7190-1-2002 Refractories.Method for sampling.Part 1: Sampling of raw materials and unshaped products
TCVN 5402-2010 Destructive tests on welds in metallic materials.Impact test.Test specimen location, notch orientation and examination

RU-GOST R, Orientation Material

GOST 27795-1988 Photographic materials. Sampling
GOST 32268-2013 Bituminous materials. Sampling
GOST R ISO 11648-2-2009 Statistical methods. Sampling from bulk materials. Part 2. Sampling of particulate materials
GOST ISO 7800-2013 Metallic materials. Wire. Simple torsion test
GOST R EN 13416-2008 Roofing, hydraulic-insulating, flexible, bitumen-based materials and polymeric (thermoplastic or elastomer) materials. Rules for sampling
GOST R 56782-2015 Polymer composites. Prepregs. Determenation of constituent content of prepreg by Soxhlet extraction
GOST R ISO 8007-3-2014 Carbonaceous materials used in the production of aluminium. Sampling plans and sampling from individual units. Part 3. Sidewall blocks
GOST R ISO 8007-2-2014 Carbonaceous materials used in the production of aluminium. Sampling plans and sampling from individual units. Part 2. Prebaked anodes
GOST EN 1482-1-2013 Fertilizers and liming materials. Sampling and preparation of samples. Part 1. Sampling
GOST 26529-1985 Powder materials. Radial crushing test method
GOST R 56793-2015 Polymer composites. Method for determination of fatigue delamination of unidirectional reinforced composites
GOST R 56683-2015 Polymer composites. Designation of directions of reinforcement
GOST 34367.1-2017 Plastics. Acquisition and presentation of comparable single-point data for moulding materials
GOST R 56808-2015 Polymer composites. Method for determination interlaminar fracture toughness of unidirectional-reinforced composites
GOST R IEC 371-3-1-1993 Insulating mica materials for commutator separators. Specifications
GOST R 54218-2010 Solid biofuels. Sampling. Part 2. Methods for sampling particulate material transported in lorries
GOST R 54255-2010 Carbonaceous materials for industrial use. Sampling. Terms and definitions
GOST ISO 9862-2014 Geosynthetics. Sampling and preparation of test specimens

TH-TISI, Orientation Material

TIS 1255-1994 Sampling of bituminous materials
TIS 2175-2004 Reverse bend test for metallic wire [iso title: metallic materials.wire.reverse bend test]
TIS 2176-2004 Torsion test for metallic wire [iso title: metallic materials.wire.simple torsion test]

AT-ON, Orientation Material

ONORM B 3120 Teil.3-1981 Natural stone; sampling; granular materials

CZ-CSN, Orientation Material

CSN 72 2624-1977 Radial bricks. Material specification
CSN 01 0112-1974 Terminology of materials sampling
CSN 01 5110-1974 Material's sampling. General rules
CSN 01 5111-1974 Sampling of loose and grained materials
CSN 01 5112-1974 Sampling of liquids and paste-like materials
CSN ISO 7801:1994 Metallic materials. Wire. Reverse bend test
CSN ISO 9649:1994 Metallic materials. Wire. Reverse torison test
CSN 64 2301-1983 Aminoplastic moulding materials Moulding materiál 301
CSN 64 2376-1983 Aminoplastic moulding materíals Moulding materiál 376
CSN 44 1308-1996 Solid minerál fuels. Sampling from stockpiles for size analysis
CSN 64 2151-1983 Phenolic moulding materials Moulding materiál 151
CSN 64 2121-1983 Phenolic moulding materials Moulding materiál 121

Korean Agency for Technology and Standards (KATS), Orientation Material

KS Q ISO 11648-2-2016(2021) Statistical aspects of sampling from bulk materials－Part 2：Sampling of particulate materials
KS B ISO 10564:2005 Soldering and brazing materials－Methods for the sampling of soft solders for analysis
KS B ISO 7800:2002 Metallic materials-Wire-Simple torsion test
KS B ISO 7801:2002 Metallic materials-Wire-Reverse bend test
KS B ISO 7801-2002(2012) Metallic materials－Wire－Reverse bend test
KS B ISO 7800:2015 Metallic materials－Wire－Simple torsion test
KS B ISO 7801:2015 Metallic materials－Wire－Reverse bend test
KS C IEC 60404-8-4-2015(2020) Magnetic materials－Part 8－4：Specifications forindividual materials－Cold－rolled non－oriented electrical steel sheet and strip delivered in the fully－processed state
KS C IEC 60404-8-7-2015(2020) Magnetic materials－Part 8－7：Specifications for individual materials－Cold－rolled grain－oriented electrical steel sheet and strip delivered in the fully－processed state
KS M ISO 15528:2003 Paints, varnishes and raw materials for paints and varnishes-Sampling
KS M ISO 15528:2015 Paints, varnishes and raw materials for paints and varnishes－Sampling
KS M ISO 13636-2014(2019) Plastics — Film and sheeting — Non-oriented poly(ethylene terephathalate)(PET) sheets
KS C IEC 60674-3-1:2014 Plastic films for electrical purposes — Part 3: Specifications for individual materials — Sheet 1: Biaxially oriented polypropylene(PP) films for capacitors
KS C IEC 60674-3-1:2019 Plastic films for electrical purposes ― Part 3: Specifications for individual materials ― Sheet 1: Biaxially oriented polypropylene(PP) films for capacitors
KS M ISO 8007-1:2003 Carbonaceous materials used in the production of aluminium-Sampling plans and sampling from individual units-Part 1:Cathode blocks
KS M ISO 8007-3:2010 Carbonaceous materials used in the production of aluminium-Sampling plans and sampling from individual units-Part 3:Sidewall blocks
KS M ISO 8007-1:2013 Carbonaceous materials used in the production of aluminium－Sampling plans and sampling from individual units－Part 1：Cathode blocks
KS M ISO 8007-3:2013 Carbonaceous materials used in the production of aluminium－Sampling plans and sampling from individual units－Part 3：Sidewall blocks
KS M ISO 8007-2:2003 Carbonaceous materials used in the production of aluminium-Sampling plans and sampling from individual units-Part 2:Prebaked anodes
KS M ISO 8007-2:2013 Carbonaceous materials used in the production of aluminium－Sampling plans and sampling from individual units－Part 2：Prebaked anodes
KS D 0039-1982 Method for sampling of precious brazing filler metals
KS C IEC 60371-3-1:2014 Specification for insulating materials based on mica — Part 3: Specifications for individual materials — Sheet 1: Commutator separators and materials
KS C 2359-1993 Rigid mica materials for commutator separators
KS C IEC 60371-3-1-2014(2019) Specification for insulating materials based on mica — Part 3: Specifications for individual materials — Sheet 1: Commutator separators and materials
KS M ISO 15988:2017 Plastics - Film and sheeting - Biaxially oriented poly(ethyleneterephthalate) (PET) films
KS B ISO 7799:2004 Metallic materials-Sheet and strip 3 mm thick or less-Reverse bend test
KS B ISO 7799:2013 Metallic materials－Sheet and strip 3 mm thick or less－Reverse bend test
KS E 3605-1996(2021) Particulate materials -General rules for methods of sampling
KS M ISO 14422:2004 Carbonaceous materials used in the production of aluminium－Cold-ramming paste－Methods of sampling
KS B ISO 10564-2005(2015) Soldering and brazing materials－Methods for the sampling of soft solders for analysis
KS B ISO 1099:2002 Metals－Axial load fatigue testing
KS A 4508-1980(2000) TESTING METHOD OF SCATTERING-RATIO OF LOW-BACKSCATTERING MATERIALS
KS B ISO 1099:2017 Metals－Axial load fatigue testing
KS M ISO 6375:2003 Carbonaceous materials for the production of aluminium-Cokes for electrodes-Sampling
KS K ISO 9862-2012(2017) Geosynthetics－Sampling and preparation of test specimens
KS F 2783-2007(2022) Sampling method for materials of steel fiber reinforced shotcrete
KS K ISO 9862-2012(2022) Geosynthetics－Sampling and preparation of test specimens
KS M ISO 6375:2013 Carbonaceous materials for the production of aluminium－Cokes for electrodes－Sampling
KS B ISO 9016:2021 Destructive tests on welds in metallic materials — Impact tests —Test specimen location, notch orientation and examination
KS B ISO 12106:2004 Metallic materials－Fatigue testing－Axial-strain-controlled method
KS B ISO 12106-2004(2019) Metallic materials－Fatigue testing－Axial-strain-controlled method

Association Francaise de Normalisation, Orientation Material

NF ISO 11648-2:2001 Aspects statistiques de l'échantillonnage des matériaux en vrac - Partie 2 : échantillonnage des matériaux particulaires
NF T58-003:1994 Plastics. Compression moulding test specimens of thermoplastic materials.
NF C26-113-1:1995 Specification for insulating materials based on mica. Part 3 : specifications for individual materials. Sheet 1 : commutator separators and materials.
NF T30-091:2013 Paints, varnishes and raw materials for paints and varnishes - Sampling
NF C26-113-1*NF EN 60371-3-1:2006 Specifications for insulating materials based on mica - Part 3 : specifications for individual materials - Sheet 1 : commutator separators and materials.
NF C26-145-3-1/A1*NF EN 60674-3-1/A1:2012 Plastic films for electrical purposes - Part 3 : specifications for individual materials - Sheet 1 : biaxially oriented polypropylene (PP) film for capacitors
NF P98-619*NF EN 13459:2012 Road marking materials - Sampling from storage and testing
NF B40-201*NF ISO/DIS 8656:1987 Refractory products. Raw materials and unshaped refractories. Sampling.
NF A81-380:1997 Soldering and brazing materials. Methods for sampling of soft solders for analysis.
NF X31-071:1983
FD ISO/TR 13329:2013 Nanomatériaux - Préparation des feuilles de données de sécurité des matériaux (MSDS)
NF EN ISO/ASTM 52903-1:2021 Fabrication additive - Fabrication additive de matériaux plastiques à base d'extrusion de matière - Partie 1 : matières premières
NF EN ISO 9862:2005 Géosynthétiques - Échantillonnage et préparation des éprouvettes
NF T45-136:2007 Rubber compounding ingrdients - Carbon black - Determination of solvent extractable material.
NF EN IEC 60674-3-1:2021 Films plastiques à usages électriques - Partie 3 : spécifications pour matériaux particuliers - Feuille 1 : films de polypropylène biorienté (PP) pour condensateurs
NF U42-400-3*NF EN 1482-3:2016 Fertilizers and liming materials - Sampling and sample preparation - Part 3 : sampling of static heaps
NF T57-404*NF ISO 15024:2002 Fibre-reinforced composites - Determination of mode I interlaminar fracture toughness, Gic, for unidirectionally reinforced materials.
NF A89-202:2013 Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination
NF B49-416:1969 Chemical analysis of refractories. Silica materials, silico-argillaceous and argillaceous materials. Determination of phosphorus.
NF B49-413:1968 Chemical analysis of refractories. Silica materials, silico-argillaceous and argillaceous materials. Determination of iron.
NF B49-412:1968 Chemical analysis of refractories. Silica materials, silico-argillaceous and argillaceous materials. Determination of aluminium.
NF B49-411:1968 Chemical analysis of refractories. Silica materials, silico-argillaceous and argillaceous materials. Determination of silicon (method by insolubilisation in hydrochloric acid medium).
NF B49-414:1968 Chemical analysis of refractories. Silica materials, silico-argillaceous and argillaceous materials. Determination of titanium.
NF B49-415:1968 Chemical analysis of refractories. Silica materials, silico-argillaceous and argillaceous materials. Determination of manganese.
NF A03-401*NF ISO 1099:2021 Metallic materials - Fatigue testing - Axial force-controlled method
NF V37-018:2001 Tobacco - Sampling of batches of raw material - General principles.
NF V37-010:1998 Materials used as cigarette papers, filter plug wrap and filter joining paper, including materials having an oriented permeable zone. Determination of air permeability.
NF EN 10107:2022 Bandes et tôles en acier électrique à grains orientés livrées à l'état fini
NF B49-417:1968 Chemical analysis of refractories. Silica materials, silico-argillaceous and argillaceous materials. Determination of calcium and magnesium.
NF A89-202:1995 Destructive tests on welds in metallic materials. Impact tests. Test specimen location, notch orientation and examination.
NF C28-901-8-1*NF EN 60404-8-1:2015 Magnetic materials - Part 8-1 : specifications for individual materials - Magnetically hard materials
NF C26-145-3-1*NF EN IEC 60674-3-1:2021 Plastic films for electrical purposes - Part 3 : specifications for individual materials - Sheet 1 : biaxially oriented polypropylene (PP) film for capacitors
NF C26-145-3-1*NF EN 60674-3-1:1998 Plastic films for electrical purposes. Part 3 : specifications for individual materials. Sheet 1 : biaxially oriented polypropylene (PP) film for capacitors.
NF A03-403*NF ISO 12106:2021 Metallic materials - Fatigue testing - Axial-strain-controlled method

German Institute for Standardization, Orientation Material

DIN ISO 9649:2018-01 Metallic materials - Wire - Reverse torsion test (ISO 9649:2016)
DIN 51937:1994 Testing of carbon materials; determination of anisotropy degree; solid materials
DIN 51061:2017-04 Testing of ceramic raw and finished materials - Sampling of ceramic raw materials
DIN 51937:1994-07 Testing of carbon materials; determination of anisotropy degree; solid materials
DIN EN ISO 10564:1997 Soldering and brazing materials - Methods for the sampling of soft solders for analysis (ISO 10564:1993); German version EN ISO 10564:1997
DIN ISO 7801:2008-10 Metallic Materials - Wire - Reverse bend test (ISO 7801:1984)
DIN EN 60371-3-1:2007 Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 1: Commutator separators and materials (IEC 60371-3-1:2006); German version EN 60371-3-1:2006
DIN 16941:1986 Thermoplastics extruded profiles; general tolerances of size, form and orientation
DIN EN 1482-1:2007-04 Fertilizers and liming materials - Sampling and sample preparation - Part 1: Sampling; German version EN 1482-1:2007 / Note: To be replaced by DIN EN ISO 14820-1 (2019-01).
DIN 51061-3:1973 Testing of ceramic raw and finished materials; sampling, refractory bricks
DIN EN ISO/ASTM 52903-1:2021-06 Additive manufacturing - Material extrusion-based additive manufacturing of plastic materials - Part 1: Feedstock materials (ISO/ASTM 52903-1:2020); German version EN ISO/ASTM 52903-1:2021
DIN 16941:2012 Thermoplastics extruded profiles - General tolerances of size, form and orientation
DIN 50433-3:1982 Testing of materials for semiconductor technology; determination of the orientation of single crystals by means of Laue back scattering
DIN 15549:2016-04 Imaging materials - Material for photographs - Composition of storage materials
DIN ISO 7800:2008 Metallic Materials - Wire - Simple torsion test (ISO 7800:2003)
DIN ISO 7801:2008 Metallic Materials - Wire - Reverse bend test (ISO 7801:1984); English version of DIN ISO 7801:2008-10
DIN EN 1482-3:2016-10 Fertilizers and liming materials - Sampling and sample preparation - Part 3: Sampling of static heaps; German version EN 1482-3:2016
DIN 19698-1:2014-05 Characterization of solids - Sampling of solid and semi-solid materials - Part 1: Guidance for the segmental sampling of stockpiles of unknown composite
DIN EN ISO 7799:2000 Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test (ISO 7799:1985); German version EN ISO 7799:2000
DIN EN 13459:2011-12 Road marking materials - Sampling from storage and testing; German version EN 13459:2011
DIN 1910-11:1979-02 Welding; terms dependent on materials for metal welding
DIN 13155:2018-11 First aid material - Case for first aid material
DIN 51933:2012-12 Testing of carbonaceous materials - Determination of content of dedusting substances in cokes by extraction - Solid materials
DIN 51060:2000-06 Refractory ceramic raw materials and refractories - Definitions of the terms refractory, high refractory
DIN 51750-3:2023-05 Testing of mineral oils - Sampling - Pasty and solid materials
DIN 51933:2012 Testing of carbonaceous materials - Determination of content of dedusting substances in cokes by extraction - Solid materials
DIN 51940:1992 Testing of carbon materials; sampling and sample preparation; solid materials, solid binders and impregnants
DIN 51940:2012-03 Testing of carbonaceous materials - Sampling and sample preparation - Solid materials, solid binders and impregnants
DIN EN 14700:2023 Welding consumables - Welding consumables for hard-facing
DIN EN 14700:2023-02 Welding consumables - Welding consumables for hard-facing; German version EN 14700:2022
DIN 29971:1991-09 Aerospace; unidirectional carbon fibre-epoxy sheet and tape prepreg; technical specification
DIN IEC 60404-8-1:2005 Magnetic materials - Part 8-1: Specifications for individual materials - Magnetically hard materials (IEC 60404-8-1:2001 + A1:2004)

CH-SNV, Orientation Material

Indonesia Standards, Orientation Material

SNI 19-0428-1998 Guide for sampling of solid materials
SNI 07-3382-1994 Constant amplitudo axial fatigue test for metallic materials
SNI 07-4611-1998 Reverse bend test for metallic material wires
SNI 03-6868-2002 Manual for random sampling of construction materials

HU-MSZT, Orientation Material

KR-KS, Orientation Material

KS M ISO 15987-2017 Plastics - Film and sheeting - Biaxially oriented polyamide(nylon) films
KS C IEC 60674-3-1-2019 Plastic films for electrical purposes ― Part 3: Specifications for individual materials ― Sheet 1: Biaxially oriented polypropylene(PP) films for capacitors
KS M ISO 15988-2017 Plastics - Film and sheeting - Biaxially oriented poly(ethyleneterephthalate) (PET) films
KS B ISO 9016-2021 Destructive tests on welds in metallic materials — Impact tests —Test specimen location, notch orientation and examination

ZA-SANS, Orientation Material

SANS 11648-2:2005 Statistical aspects of sampling from bulk materials Part 2: Sampling of particulate materials
SANS 7801:2003 Metallic materials - Wire - Reverse bend test

SG-SPRING SG, Orientation Material

SS ISO 10564:1993 Soldering And Brazing Materials -Methods For The Sampling Of Soft Solders For Analysis
SS 285 AMD 1-1984 Soldering And Brazing Materials -Methods For The Sampling Of Soft Solders For Analysis

ES-AENOR, Orientation Material

Danish Standards Foundation, Orientation Material

DS/ISO 11648-2:2002 Statistical aspects of sampling from bulk materials - Part 2: Sampling of particulate materials
DS/EN 1482-1:2007 Fertilizers and liming materials - Sampling and sample preparation - Part 1: Sampling
DS/EN 60371-3-1:2007 Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 1: Commutator separators and materials
DS/INSTA 440:1986 Flexible materials. Cod for stating of reeling direction and print orientation
DS/EN ISO 10564:1997 Soldering and brazing materials - Methods for the sampling of soft solders for analysis
DS/EN ISO 9862:2006 Geosynthetics - Sampling and preparation of test specimens
DS 1058.3:1977 Materials. Coverings and linings. Ignition temperature and surface spread of flame
DS/EN 14700:2005 Welding consumables - Welding consumables for hard-facing
DS/ISO 18902:2013 Imaging materials - Processed imaging materials - Albums, framing and storage materials

UY-UNIT, Orientation Material

FI-SFS, Orientation Material

SFS 351-1975
SFS 901-1973
SFS 451-1973
SFS 501-1972
SFS-ISO 842:1987 In case of interpretation disputes the English text applies
SFS 2115-1966
SFS 1101-1977
SFS 3815-1976

American Society for Testing and Materials (ASTM), Orientation Material

ASTM E1287-89(1999) Standard Practice for Aseptic Sampling of Biological Materials
ASTM D6405-99 Standard Practice for Extraction of Tannins from Raw and Spent Materials
ASTM D6405-99(2004) Standard Practice for Extraction of Tannins from Raw and Spent Materials
ASTM D6405-99(2009) Standard Practice for Extraction of Tannins from Raw and Spent Materials
ASTM D6405-99(2014) Standard Practice for Extraction of Tannins from Raw and Spent Materials
ASTM D305-84(2003) Standard Test Method for Solvent-Extractable Material in Black Pigments
ASTM D1009-55 Recommended Code for Designating Form of Material and Direction of Testing Plastics
ASTM C970-87(1997) Standard Practice for Sampling Special Nuclear Materials in Multi-Container Lots
ASTM C970-87(2006) Standard Practice for Sampling Special Nuclear Materials in Multi-Container Lots
ASTM D140/D140M-15 Standard Practice for Sampling Bituminous Materials
ASTM E105-16 Standard Practice for Probability Sampling of Materials
ASTM D305-84(2020) Standard Test Method for Solvent-Extractable Material in Black Pigments
ASTM D305-84(2008) Standard Test Method for Solvent-Extractable Material in Black Pigments
ASTM D305-84(2014) Standard Test Method for Solvent-Extractable Material in Black Pigments
ASTM E1792-96a Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
ASTM D2257-98 Standard Test Method for Extractable Matter in Textiles
ASTM C1385-98 Standard Practice for Sampling Materials for Shotcrete
ASTM E105-04 Standard Practice for Probability Sampling Of Materials
ASTM D2257-98(2004) Standard Test Method for Extractable Matter in Textiles
ASTM E1792-20 Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
ASTM D6404-99(2020) Standard Practice for Sampling Vegetable Materials Containing Tannin

European Committee for Standardization (CEN), Orientation Material

EN ISO 10564:1997 Soldering and Brazing Materials - Methods for the Sampling of Soft Solders for Analysis ISO 10564: 1993
HD 352.3.1 S2-1987 Specification for insulating materials based on mica; part 3: specifications for individual materials; sheet 1: commutator separators and materials
prEN 875-1992 Welding; welded joints in metallic materials; specimen location and notch orientation for impact tests
EN 875:1995 Destructive Tests on Welds in Metallic Materials - Impact Tests - Test Specimen Location, Notch Orientation and Examination
prEN 895-1992 Welding; welded joints in metallic materials; transverse tensile tests

Professional Standard - Nuclear Industry, Orientation Material

EJ/T 1017-1996 General principles for sampling nuclear material in the nuclear fuel cycle

Standard Association of Australia （SAA）, Orientation Material

AS 4433.5:2005 Guide to the sampling of particulate materials - Sampling of slurries
AS 4433.1:1997 Guide to the sampling of particulate materials - Sampling procedures
AS 1580.102.1:2002 Paints and related materials - Methods of test - Sampling procedure
AS 1145.4:2001 Determination of tensile properties of plastics materials - Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
AS 5101.2.2:2008 Methods for preparation and testing of stabilized materials - Sampling - Preparation of stabilized pavement materials
AS 4433.2:1997 Guide to the sampling of particulate materials - Preparation of samples
AS 1141.13:1995 Methods for sampling and testing aggregates Method 13: Material finer than 2 um
AS/NZS 1906.4:2010
AS 2503.5:2003(R2013)
AS ISO/ASTM 52903.1:2021 Additive manufacturing — Material extrusion-based additive manufacturing of plastic materials, Part 1: Feedstock materials
AS/NZS 1906.4:1997 Retroreflective materials and devices for road traffic control purposes - High visibility materials for safety garments

Group Standards of the People's Republic of China, Orientation Material

T/SHDSGY 036-2022 The c-rod material used in automobile switchgear
T/NXSCJS 064-2023 Specifications for outbound extraction and identification materials
T/JJSY 012-2022 Technical specification for general materials for reverse umbrellas
T/MBJX 0002-2019 Permanent magnet (hard magnetic) material sampling and acceptance procedures
T/ZHAA 1-2022 Additive manufacturing process of blue laser Directional Energy Deposition of high-refelective materials
T/CWAN 0079-2023 Raw and auxiliary materials for welding consumables- Technical requirements for procurement of auxiliary materials
T/CAMMT 22-2019 Additive manufacturing – Plastic filament extrusion

GM North America, Orientation Material

GM GM6009M-2003 Radial Lip Seal Materials Replaced by GMN4907
GM GMN4907-2002 Classification Standard for Radial Lip Seal Materials
GM 9981387-1991 Highlighting Fluid Spray Material and MIG Replaced by 9984117

CENELEC - European Committee for Electrotechnical Standardization, Orientation Material

EN 60371-3-1:1995 Specification for Insulation Materials Based on Mica Part 3: Specifications for Individual Materials Sheet 1: Commutator Separators and Materials

European Committee for Electrotechnical Standardization（CENELEC）, Orientation Material

HD 352.3.1 S2-1989 Specification for Insulating Materials Based on Mica-Part 3: Specifications for Individual Materials. Sheet One: Commutator Separators and Materials
EN 60371-3-1:2006 Specification for Insulation Materials Based on Mica Part 3: Specifications for Individual Materials Sheet 1: Commutator Separators and Materials
EN 60404-8-1:2015 Magnetic materials - Part 8-1: Specifications for individual materials - Magnetically hard materials

IN-BIS, Orientation Material

Japanese Industrial Standards Committee (JISC), Orientation Material

JIS R 2551:1985 Sampling method for castable refractories
JIS Z 4818:1984 Reducing materials for back scattering X-rays
JIS R 2651:1957 Sampling method for lightweight castable refractories
JIS M 8100 ERRATUM 1:2000 Particulate materials -- General rules for methods of sampling (Erratum 1)
JIS M 8100:1992 Particulate materials -- General rules for methods of sampling

RO-ASRO, Orientation Material

STAS SR ISO 7801:1993 Metallic materials. Wire. Reverse bend test
STAS SR ISO 1795:1995 Rubber, raw, natural and synthetic material - Sampling and further preparative procedures
STAS SR 220-11-1997 Viticulture planting material Sampling for pnalysis
STAS 4233-1969

United States Navy, Orientation Material

NAVY MIL-STD-289 A VALID NOTICE 1-1988 VISUAL INSPECTION GUIDE FOR RUBBER SHEET MATERIAL
NAVY MIL-STD-289 A-1968 VISUAL INSPECTION GUIDE FOR RUBBER SHEET MATERIAL
NAVY QPL-15280-2013 Plastic, Material, Unicellular(Sheets and Tubes)

Lithuanian Standards Office , Orientation Material

LST EN 1482-1-2007 Fertilizers and liming materials - Sampling and sample preparation - Part 1: Sampling
LST EN 60371-3-1-2006 Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 1: Commutator separators and materials (IEC 60371-3-1:2006)
LST EN 14700-2005 Welding consumables - Welding consumables for hard-facing

AENOR, Orientation Material

UNE-EN 1482-1:2007 Fertilizers and liming materials - Sampling and sample preparation - Part 1: Sampling
UNE 64027:1970 MIXED FEEDS AND RAW MATERIALS. DETERMINATION OF EXTRACTIVE MATTERS NITROGEN FREE.
UNE 7469:1999 METALLIC MATERIALS. WIRE. REVERSE BEND TEST.
UNE 7145:1959 HOT EXTRACTION O ASPHALTIC MATERIALS AND BITUME RECOVERY.
UNE-EN 60371-3-1:2006 Specification for insulating materials based on mica -- Part 3: Specifications for individual materials -- Sheet 1: Commutator separators and materials (IEC 60371-3-1:2006)
UNE-EN 14700:2014 Welding consumables - Welding consumables for hard-facing
UNE 64021:1970 MIXED FEEDS AND RAW MATERIALS. QUANTITATIVE DETERMINATION OF GROSS FAT OF ETHER EXTRACT.

BE-NBN, Orientation Material

NBN T 21-001-1982 Raw materials for paints and varnishes - Sampling
NBN T 03-479-1984 Carbonaceous materials for the production of aluminium - Cokes for elec-trodes - Sampling
NBN T 03-478-1984 Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Sampling

The American Road & Transportation Builders Association, Orientation Material

AASHTO R 66-2015 Standard Practice for Sampling Asphalt Materials
AASHTO DIVISION II 19.3 Materials
AASHTO DIVISION II 14.2 Materials
AASHTO DIVISION II 29.3 Materials

AASHTO - American Association of State Highway and Transportation Officials, Orientation Material

R 66-2015 Standard Practice for Sampling Asphalt Materials
T40-1978 Standard Method of Test for Sampling Bituminous Materials
T 40-2002 Standard Method of Test for Sampling Bituminous Materials
DIVISION II 1.3-1996 Materials
DIVISION II 12.2-1996 Materials
DIVISION I 13.2-1996 Materials
DIVISION II 10.3-1996 Materials
DIVISION II 4.2-1996 Materials
DIVISION II 26.3-1996 Materials
DIVISION II 29.3-1996 Materials
DIVISION II 14.2-1996 Materials
DIVISION II 15.2-1996 Materials
DIVISION II 23.2-1996 Materials
DIVISION II 22.3-1996 Materials
DIVISION II 27.3-1996 Materials
DIVISION II 6.3-1996 Materials
DIVISION II 21.2-1996 Materials
DIVISION II 24.2-1996 Materials
DIVISION II 16.2-1996 Materials
DIVISION II 17.2-1996 Materials
DIVISION II 19.3-1996 Materials

Professional Standard - Aerospace, Orientation Material

QJ 3041-1998 Sampling method for re-examination of non-metallic materials
QJ 2808-1996 Specification for three-way quartz fiber composite products
QJ 10014.1-2008 Safety and Compatibility of Space Materials Part 1: Determination of upward burning performance of materials

工业和信息化部, Orientation Material

QB/T 5303-2018 Geosynthetic four-way stretch plastic geogrid

Association of German Mechanical Engineers, Orientation Material

VDI 4630-2006 Fermentation of organic materials - Characterisation of the substrate, sampling, collection of material data, fermentation tests
VDI 4630-2016 Fermentation of organic materials - Characterization of the substrate, sampling, collection of material data, fermentation tests

Professional Standard - Machinery, Orientation Material

JB/T 6819.3-1993 Instrument material terminology - Resistance material, conducting material and electric contact material
JB/T 6819.4-1993 Instrument material terminology - Magnetic material
JB/T 6819.2-1993 Instrument material terminology - Temperature-measurement material
JB/T 6819.5-1993 Instrument material terminology - Elastic material

Professional Standard - Building Materials, Orientation Material

JC/T 965-2005 Building industrial hydraulic bucket excavator

国家市场监督管理总局、中国国家标准化管理委员会, Orientation Material

GB/T 39253-2020 Additive manufacturing—Specification for directed energy deposition of metal materials
GB/T 3075-2021 Metallic materials—Fatigue testing—Axial force-controlled method

Professional Standard - Commodity Inspection, Orientation Material

SN/T 2811-2011 Determination of extracts in polymer materials and rubber products of export food contact materials
SN/T 2825-2011 Determination of total volatile extractables in polymer materials, acrylic plastics, food contact materials for export
SN/T 2812-2011 Determination of extracts from olefin polymers in polymer materials for export food contact materials
SN/T 2815-2011 Determination of Polyoxymethylene Polyoxymethylene Extract in High Molecular Materials for Export Food Contact Materials
SN/T 3145-2011 Food contact materials for export.Polymers.Determination of extractives in acrylonitrile-butadiene-styrene copolymers, polyethylene phthalate polymers, ethylene-vinyl acetate copolymers and their products
SN/T 2814-2011 Determination of extracts from gaskets used for export food contact materials, polymer materials, food container seals

PL-PKN, Orientation Material

PN BN 7442-09-1965 Composing materia? Blank materia?
PN H04941-1986 Sintered metal materials Determination of radial crushing strength
PN H04942-1986 Sintered metal materials Determination of transverse rupture strength

Electrostatic Discharge Association (ESDA), Orientation Material

ANSI/ESD S7.1-2005 Floor Materials Characterization of Materials

AGMA - American Gear Manufacturers Association, Orientation Material

244.01-59-1959 Materials Nodular Lron Gear Materials

(U.S.) Ford Automotive Standards, Orientation Material

FORD FLTM EU BN 025-1-2001 DETERMINATION OF WRINKLE FORMING TENDENCY OF TRIM COVERING MATERIALS

GB-REG, Orientation Material

REG 33 CFR PART 324-2011 PERMITS FOR OCEAN DUMPING OF DREDGED MATERIAL
REG 46 CFR PART 164-2011 MATERIALS

Professional Standard - Textile, Orientation Material

FZ/T 64091-2022 Carbon/Glass Hybrid Warp Knitted Multiaxial Reinforcement Material

ES-UNE, Orientation Material

UNE 7469:2003 ERRATUM METALLIC MATERIALS. WIRE. REVERSE BEND TEST.
UNE-EN 1482-3:2017 Fertilizers and liming materials - Sampling and sample preparation - Part 3: Sampling of static heaps
UNE-EN ISO/ASTM 52903-1:2021 Additive manufacturing - Material extrusion-based additive manufacturing of plastic materials - Part 1: Feedstock materials (ISO/ASTM 52903-1:2020)
UNE-EN 14700:2023 Welding consumables - Welding consumables for hard-facing

未注明发布机构, Orientation Material

BS EN 1482-3:2016(2017) Fertilizers and liming materials — Sampling and sample preparation Part 3 : Sampling of static heaps
BS EN 14700:2022 Welding consumables — Welding consumables for hard - facing

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Orientation Material

GB/T 4513.2-2017 Monolithic (unshaped) refractory products—Part 2：Sampling for testing

Professional Standard - Public Safety Standards, Orientation Material

GA/T 505-2004 Method of preparing the fire scenario effluents from a material

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Orientation Material

JEDEC JEP142-2002 Obtaining and Accepting Material for Use in Hybrid/MCM Products

应急管理部, Orientation Material

XF/T 505-2004 Material fire scene smoke production method

DE-GPVA, Orientation Material

AD 2000-Merkblatt W10-2016 Materials for pressure vessels. Materials for low temperatures. Ferrous materials
AD 2000-Merkblatt W0-2006 Materials for pressure vessels.General principles for materials

TR-TSE, Orientation Material

TS 681-1969 PLASTICS DETERMINATION OF THE PERCENTAGE OF EXTRACTABLE MATERIALS ?N POLYAMIDES

CEN - European Committee for Standardization, Orientation Material

EN 1482-3:2016 Fertilizers and liming materials - Sampling and sample preparation - Part 3: Sampling of static heaps
PD CEN/TS 14778-2:2005 Solid biofuels - Sampling - Part 2: Methods for sampling particulate material transported in lorries

Professional Standard - Aviation, Orientation Material

HB 5287-1996 Axial loading fatigue test method for metallic materials

Military Standard of the People's Republic of China-General Armament Department, Orientation Material

GJB 1997A-2018 Axial corrosion fatigue test method for metallic materials
GJB 1997-1994 Axial corrosion fatigue test method for metallic materials
GJB 15.1-1992 Specifications for ship materials Hull materials
GJB 15.2-1984 Specifications for ship materials and engine materials

GOSTR, Orientation Material

GOST R ISO 14624-1-2010 Space systems. Safety and compatibility of materials. Part 1. Determination of upward flammability of material

Building Officials and Code Administrators International(U.S.), Orientation Material

BOCA ARTICLE 4 NPC COMM-1990 Materials
BOCA CHAPTER 4 NPC-1993 Materials
BOCA CHAPTER 4 NPC COMM-1993 Materials
BOCA CHAPTER 5 IPSDC-1995 Materials
BOCA IPSDC-1997 CHAPTER 5-1997 Materials

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Orientation Material

IPC TA-721 SECTION 3 Materials

International Code Council, Orientation Material

ICC IPSDC-1997 CHAPTER 5-1997 Materials

National Fire Protection Association (NFPA), Orientation Material

NFPA 99H CHAPTER 7-2002 Materials

Shandong Provincial Standard of the People's Republic of China, Orientation Material

DB37/T 3026-2017 Technical requirements for geosynthetic four-way tensile plastic geogrid

PT-IPQ, Orientation Material

NP 2893-1985

CU-NC, Orientation Material

NC 04-72-1985 Materials Testing. Welded Joints. Transversal Tension Test Pieces

American Society of Mechanical Engineers (ASME), Orientation Material

ASME BPVC.II.A-2015 Materials-Part A-Ferrous Materials Specifications