ZH
RU
ES

How to check and accept the test equipment

How to check and accept the test equipment, Total:64 items.

In the international standard classification, How to check and accept the test equipment involves: Rails and railway components, Linear and angular measurements, Air quality, Vocabularies, Mining and quarrying, Construction materials, Switchgear and controlgear, Protection against fire, Installations in buildings, Protection against crime, Welding, brazing and soldering, Gas and steam turbines. Steam engines, Medical equipment, Vibrations, shock and vibration measurements, Shipbuilding and marine structures in general, Environmental protection.

Korean Agency for Technology and Standards (KATS), How to check and accept the test equipment

KS R 9229-2005 Railway rolling stock－Radiator element－Inspection methods
KS B ISO 10360-1:2004 Geometrical Product Specifications(GPS)-Acceptance and reverification tests for coordinate measuring machines(CMM)-Part 1:Vocabulary
KS B ISO 10360-1:2014 Geometrical Product Specifications(GPS) — Acceptance and reverification tests for coordinate measuring machines(CMM) — Part 1: Vocabulary
KS B ISO 10360-5:2004 Geometrical Product Specifications(GPS)-Acceptance and reverification test for coordinate measuring machines(CMM)-Part 5:CMMs using multiple-stylus probing systems
KS B ISO 10360-5:2014 Geometrical product specifications(GPS) — Acceptance and reverification tests for coordinate measuring machines(CMM) — Part 5: CMMs using single and multiple stylus contacting probing systems
KS B ISO 10360-7:2004 Geometrical Product Specifications(GPS)-Acceptance and reverification tests for coordinate measuring machines(CMM)-Part 7:CMMs used for measuring
KS B ISO 10360-7:2015 Geometrical Product Specifications(GPS)-Acceptance and reverification tests for coordinate measuring machines(CMM)-Part 7:CMMs used for measuring
KS B ISO 10360-7:2020 Geometrical product specifications(GPS) — Acceptance and reverification tests for coordinate measuring machines(CMM) —Part 7: CMMs equipped with imaging probing systems
KS B ISO 10360-6:2014 Geometrical Product Specifications(GPS) — Acceptance and reverification tests for coordinate measuring machines(CMM) — Part 6: Estimation of errors in computing Gaussian associated features
KS B ISO 10360-6:2004 Geometrical Product Specifications(GPS)-Acceptance and reverification tests for coordinate measuring achines(CMM)-Part 6:Estimation of errors in computing Gsussian associated features
KS B ISO 10360-4:2004 Geometrical Product Specifications(GPS)-Acceptance and reverification tests for coordinate measuring machines(CMM)-Part 4:CMMs used in scanning measuring mode
KS B ISO 10360-4:2014 Geometrical Product Specifications(GPS) — Acceptance and reverification tests for coordinate measuring machines(CMM) — Part 4: CMMs used in scanning measuring mode
KS B ISO 10360-2:2003 Geometrical product specifications(GPS)-Acceptance and reverification tests for coodinate measuring machines(CMM)-Part 2:CMMs used for measuring size
KS B ISO 10360-2:2014 Geometrical product specifications(GPS)-Acceptance and reverification tests for coodinate measuring machines(CMM)-Part 2:CMMs used for measuring size

CZ-CSN, How to check and accept the test equipment

CSN OEG 38 1020-1966 Acceptance tests of power station equipments
CSN 12 4015-1989 Separation equipment. Acceptance rules and testing methods

Association of German Mechanical Engineers, How to check and accept the test equipment

VDI/VDE/DGQ 2618 Blatt 1.2-2003 Inspection of measuring and test equipment - Instructions for the inspection of measuring and test equipment for geometrical quantities - Uncertainty of measurement
VDI/VDE/DGQ 2618 Blatt 10.4-2008 Inspection of measuring and test equipment - Instructions to inspect measuring and test equipment for geometrical quantities - Test instruction for micrometer heads
VDI/VDE/DGQ 2618 Blatt 1.1-2001 Inspection of measuring and test equipment - Instructions to inspect measuring and test equipment for geometrical quantities - Basic principals

PL-PKN, How to check and accept the test equipment

PN B10090-1969 Built-in fitmen?s Specifications and acCep?ance tests
PN M34140-11-1989 Instalations for the water treatment Instalations for ozonizations of water Re?uirements and aceptans tests
PN M34129-1987 Dust extraction plants forsteam boilers Reguirements and post — assembly acceptance tests

Association Francaise de Normalisation, How to check and accept the test equipment

NF E11-150-4:2000 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 4 : CMMs used in scanning measuring mode.
NF E11-096:2013 Geometrical product specification (GPS) - Dimensional measuring equipment - Reception and verification of depth gauges
NF E11-056:2013 Geometrical product specification (GPS) - Dimensional measuring equipment - Reception and verification of digital dial gauge
NF E11-095:2013 Geometrical product specification (GPS) - Dimensional measuring equipment - Reception and verification of micrometers for external measurements
NF E11-056:2016 Geometrical product specification (GPS) - Dimensional measuring equipment - Reception and verification of digital dial gauge with plunger
NF E11-150-3*NF EN ISO 10360-3:2000 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3 : CMMs with the axis of a rotary table as the fourth axis.
FD E10-201-6*FD ISO/TR 14253-6:2013 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 6 : generalized decision rules for the acceptance and rejection of instruments and workpieces
NF EN ISO 10360-7:2011 Spécification géométrique des produits (GPS) - Essais de réception et de vérification périodique des machines à mesurer tridimensionnelles (MMT) - Partie 7 : MMT équipées de systèmes de palpage imageurs
NF E11-098-2:2019 Geometrical product specifications (GPS) - Dimensional measuring equipments - Part 2 : internal micrometer with tow spindles - Acceptance and reverification
NF E11-150-7*NF EN ISO 10360-7:2011 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7 : CMMs equipped with imaging probing systems

U.S. Military Regulations and Norms, How to check and accept the test equipment

ARMY MIL-A-70625 A REINST NOTICE 2-2000 AUTOMATED ACCEPTANCE INSPECTION EQUIPMENT DESIGN, TESTING AND APPROVAL, OF
ARMY MIL-A-70625 A-1989 AUTOMATED ACCEPTANCE INSPECTION EQUIPMENT DESIGN, TESTING AND APPROVAL, OF

European Committee for Standardization (CEN), How to check and accept the test equipment

EN 13373:2003 Natural stone test methods - Determination of geometric characteristics on units
EN 12952-15:2003 Water-tube boilers and auxiliary installations - Part 15: Acceptance tests

RU-GOST R, How to check and accept the test equipment

GOST 26748-1985 Low voltage complete devices. Acceptage rules. Methods of tests
GOST 8554-1989 Fire equipment. Motor-pomps. Acceptance and test methods
GOST R 51111-1997 Equipment for bank protection. Acceptance rules and test methods
GOST IEC 62052-21-2014 Electricity metering equipment (a.c.). General requirements, tests and test conditions. Part 21. Tariff and load control equipment
GOST R 54117-2010 The Global Navigation Satellite Systems. Maritime differential subsystems. Navigation receiver equipment. Performance standards, methods of testing and required test results

American National Standards Institute （ANSI), How to check and accept the test equipment

ANSI/NETA ATS-2021 STANDARD FOR ACCEPTANCE TESTING SPECIFICATIONS FOR ELECTRICAL POWER EQUIPMENT & SYSTEMS
ANSI/ASA S2.26-2001 Vibration Testing Requirements and Acceptance Criteria for Shipboard Equipment

British Standards Institution (BSI), How to check and accept the test equipment

BS EN 62052-21:2005 Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Tariff and load control equipment
BS EN 62052-21:2004 Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 21: Tariff and load control equipment
BS EN ISO 10360-5:2010 Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). CMMs using single and multiple stylus contacting probing systems

US-CFR-file, How to check and accept the test equipment

CFR 46-159.005-9-2014 Shipping. Part159:Approval of equipment and materials. Section159.005–9:Approval inspections and tests.
CFR 40-1054.505-2014 Protection of Environment. Part1054:Control of emissions from new, small nonroad spark-ignition engines and equipment. Section1054.505:How do I test engines?
CFR 46-160.021-4-2014 Shipping. Part160:Lifesaving equipment. Section160.021–4:Approval and productiontests.
CFR 46-160.024-4-2014 Shipping. Part160:Lifesaving equipment. Section160.024–4:Approval and productiontests.
CFR 46-160.036-4-2014 Shipping. Part160:Lifesaving equipment. Section160.036–4:Approval and productiontests.

German Institute for Standardization, How to check and accept the test equipment

DIN 65153:1997-06 Aerospace - Acceptance testing of plasma arc welding equipment
DIN 15030:1977-11 Lifting Equipment; Acceptance Testing of Crane Installations; Principles
DIN EN ISO 10360-7:2011-09 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011); German version EN ISO 10360-7:2011

RO-ASRO, How to check and accept the test equipment

STAS SR EN 28206-1995 Acceptance tests for oxygen cutting machines - Reproducible accuracy - Operational characteristics

International Organization for Standardization (ISO), How to check and accept the test equipment

ISO 10360-1:2000/cor 1:2002 Geometrical Product Specifications (GPS) - Acceptance and reverification test for coordinate measuring machines (CMM) - Part 1: Vocabulary; Technical Corrigendum 1
ISO 10360-7:2011 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems

Standard Association of Australia （SAA）, How to check and accept the test equipment

AS/NZS 4184.3.4:2002 Evaluation and routine testing in medical imaging departments - Acceptance tests - Imaging performance of dental X-ray equipment

American Society for Testing and Materials (ASTM), How to check and accept the test equipment

ASTM E1108-86(2004) Standard Test Method for Determination of the Recovery of a Product in a Materials Separation Device

KR-KS, How to check and accept the test equipment

KS B ISO 10360-7-2020 Geometrical product specifications(GPS) — Acceptance and reverification tests for coordinate measuring machines(CMM) —Part 7: CMMs equipped with imaging probing systems

Danish Standards Foundation, How to check and accept the test equipment

DS/EN ISO 10360-7:2011 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems

Group Standards of the People's Republic of China, How to check and accept the test equipment

T/ZS 0216-2021 Technical code for installation and acceptance of dust on-line monitoring equipment（trail implementation）

Lithuanian Standards Office , How to check and accept the test equipment

LST EN ISO 10360-7:2011 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011)

AENOR, How to check and accept the test equipment

UNE-EN ISO 10360-7:2012 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011)