ZH
RU
ES
sheet metal
sheet metal, Total:113 items.
In the international standard classification, sheet metal involves: Barrels. Drums. Canisters, Testing of metals, Chipless working equipment, Iron and steel products, Manufacturing forming processes, Diagnostic, maintenance and test equipment, Equipment for the metallurgical industry, Powder metallurgy, Springs, Graphic technology, Electric road vehicles, Magnetic materials, Elements of buildings, Components for aerospace construction, Products of non-ferrous metals, Welding, brazing and soldering, Materials for aerospace construction, Protection of and in buildings, Non-ferrous metals.
Association Francaise de Normalisation, sheet metal
- NF EN ISO 1478:1999 Filetage de vis à tôle
- FD E81-020:2019 Lignes directrices pour l'établissement de spécifications pour les produits lubrifiants pour le travail des métaux en feuilles
- NF EN 1506:2007 Ventilation des bâtiments - Conduits en tôle et accessoires à section circulaire - Dimensions
- NF C28-930:1983 Produits sidérurgiques - Tôles découpées pour circuits magnétiques de transformateurs - Découpage sans déchets
- NF A03-652*NF EN ISO 20482:2014 Metallic materials - Sheet and strip - Erichsen cupping test
Korean Agency for Technology and Standards (KATS), sheet metal
General Motors Corporation (GM), sheet metal
- GM 9981833-2001 Mill Oil - Corrosion Preventative for Sheet Metal Revision C
Professional Standard - Aviation, sheet metal
- HB 6736-1993 Method of Shear Test for Sheet Metal
- HB 6660-2011 Test method for thermal fatigue of metals with rectangular plate specimen
- HB 6660-1992 Test method for thermal fatigue of sheet metal
- HB 5261-1983 KR curve test method for sheet metal
- HB 5279-1984 Test method for surface crack fracture toughness of sheet metal
- HB 5180-1981 Test method for cold bending of metal plate and strip
TR-TSE, sheet metal
AWS - American Welding Society, sheet metal
- D9.1-1984 SPECIFICATION FOR WELDING OF SHEET METAL; ERRATA
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, sheet metal
- GB/T 8651-2015 Flaw detection method by the ultrasonic plate wave for metal plates
- GB/T 8651-2002 Metal plates-Flaw detection method by the ultrasonic plate wave
- GB/T 41859-2022 Sheet metal precise cold bending—Technical specification
- GB/T 7732-1987 Standard test method for surface-crack fracture toughness Kle of metallie plates
RU-GOST R, sheet metal
- GOST 10510-1980 Metals. Erikson test method for sheets and strips extrusion
IN-BIS, sheet metal
Indonesia Standards, sheet metal
Professional Standard - Ferrous Metallurgy, sheet metal
- YB/T 4056-2006 Technical specifications of work roll for plate straightener
- YB 4056-1991 Specifications for working rolls of sheet metal leveling machines
- YB/T 4056-1991 Specifications for working rolls of sheet metal leveling machines
工业和信息化部, sheet metal
- YB/T 4056-2021 Technical conditions for work rolls of sheet metal straightening machines
- YS/T 1273-2018 Iron-nickel-aluminum composite metal sheets for rail transit
- YS/T 1266-2018 Test method for creep properties of refractory metal plates and rods
- YS/T 1250-2018 Test method for high temperature tensile properties of refractory metal sheets and rods
American National Standards Institute （ANSI), sheet metal
- ANSI/ASTM E855:1990 Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading
- ANSI/ASTM E643:1984 Test Method for Ball Punch Deformation of Metallic Sheet Material
American Society for Testing and Materials (ASTM), sheet metal
- ASTM E643-84(1995) Standard Test Method for Ball Punch Deformation of Metallic Sheet Material
- ASTM E2712-09e1 Standard Test Methods for Forming Superplastic Metallic Sheet
- ASTM E2448-22 Standard Test Method for Determining the Superplastic Properties of Metallic Sheet Materials
- ASTM E2448-18 Standard Test Method for Determining the Superplastic Properties of Metallic Sheet Materials
- ASTM E2448-11 Standard Test Method for Determining the Superplastic Properties of Metallic Sheet Materials
- ASTM E2448-11e1 Standard Test Method for Determining the Superplastic Properties of Metallic Sheet Materials
- ASTM E855-90(2000) Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading
- ASTM E855-08 Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading
- ASTM E855-08(2013) Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading
- ASTM E643-09 Standard Test Method for Ball Punch Deformation of Metallic Sheet Material
SE-SIS, sheet metal
Professional Standard - Machinery, sheet metal
- JB/T 4115-1999 Sintered bimetal plates for side-plates of the hydraulic pump and motor
- JB/T 4115-2022 Sintered bimetal sheet for hydraulic pump and hydraulic motor side plate
KR-KS, sheet metal
Professional Standard - Press and Publication, sheet metal
- CY/T 214-2020 Sheet-fed sheet metal offset printing product quality requirements and inspection methods
- CY/T 215-2020 Production process control requirements and inspection methods for offset printing of sheet-fed metal sheets
Society of Automotive Engineers (SAE), sheet metal
- SAE J863-1963 Methods of Determining Plastic Deformation in Sheet Metal Stampings, Recommended Practice
- SAE AMS-I-7068-1999 Ingot, Zinc Alloy (for Sheet Metal Forming Dies) FSC 9650; Should Be Used Instead of MIL-I-7068A, Which Was Cancelled on 23 August 1999
- SAE AMS4258A-2006 Laminated Sheet, Aluminum Alloy, Aramid Fiber Reinforced, 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (Alclad, One Side 7475-T761) 5 or 7 Ply
Japanese Industrial Standards Committee (JISC), sheet metal
- JIS Z 2257:2021 Biaxial tensile testing method for sheet metals using a cruciform test piece
Group Standards of the People's Republic of China, sheet metal
- T/CSAE 52-2016 Test method for mechanical properties of sheet metal at high strain rates
International Organization for Standardization (ISO), sheet metal
- ISO 16630:2009 Metallic materials - Sheet and strip - Hole expanding test
- ISO 11531:2015 Metallic materials - Sheet and strip - Earing test
- ISO 16630:2017 Metallic materials - Sheet and strip - Hole expanding test
- ISO 10113:2020 Metallic materials — Sheet and strip — Determination of plastic strain ratio
- ISO 8490:1986 Metallic materials; Sheet and strip; Modified Erichsen cupping test
- ISO 10275:2020 Metallic materials — Sheet and strip — Determination of tensile strain hardening exponent
- ISO 11531:2022 Metallic materials — Sheet and strip — Earing test
British Standards Institution (BSI), sheet metal
- BS ISO 16630:2017 Metallic materials. Sheet and strip. Hole expanding test
- BS EN ISO 10113:2020 Metallic materials. Sheet and strip. Determination of plastic strain ratio
- BS ISO 11531:2022 Tracked Changes. Metallic materials. Sheet and strip. Earing test
- BS ISO 24213:2008 Metallic materials - Sheet and strip - Method for springback evaluation in stretch bending
- BS ISO 11531:2015 Metallic materials. Sheet and strip. Earing test
- BS EN ISO 10275:2020 Metallic materials. Sheet and strip. Determination of tensile strain hardening exponent
- BS ISO 10113:2006 Metallic materials - Sheet and strip - Determination of plastic strain ratio
European Committee for Standardization (CEN), sheet metal
- EN 501:1994 Roofing products from metal sheet - Specification for fully supported roofing products of zinc sheet
- EN 14783:2013 Fully supported metal sheet and strip for roofing, external cladding and internal lining - Product specification and requirements
- EN ISO 20482:2003 Metallic materials Sheet and strip Erichsen cupping test ISO 20482: 2003
German Institute for Standardization, sheet metal
- DIN 9003-5:1986-12 Aerospace; bending of light metal sheet and strip; dimensions, limit deviations and compensation values / Note: To be replaced by DIN EN 3071 (1997-09).
- DIN 2032:1987 Metal packages; screwed closures of light gauge metal
- DIN 9003-3:1994 Aerospace - Bending of light metal sheets and strips - Part 3: Bending radii, directions for design
- DIN 9003-3:1994-08 Aerospace - Bending of light metal sheets and strips - Part 3: Bending radii, directions for design
- DIN EN ISO 10113:2014 Metallic materials - Sheet and strip - Determination of plastic strain ratio (ISO 10113:2006); German version EN ISO 10113:2014
- DIN EN ISO 10113:2021-06 Metallic materials - Sheet and strip - Determination of plastic strain ratio (ISO 10113:2020, Corrected version 2020-11); German version EN ISO 10113:2020
- DIN EN ISO 20482:2014-03 Metallic materials - Sheet and strip - Erichsen cupping test (ISO 20482:2013); German version EN ISO 20482:2013
- DIN EN 501:1994 Roofing products from metal sheet - Specification for fully supported roofing products from zinc sheet; German version EN 501:1994
- DIN EN ISO 10113:2017 Metallic materials - Sheet and strip - Determination of plastic strain ratio (ISO/DIS 10113:2017); German and English version prEN ISO 10113:2017
Professional Standard - Aerospace, sheet metal
- QJ 905-1985 Compression test method for sheet metal materials
Lithuanian Standards Office , sheet metal
- LST EN 14783-2006 Fully supported metal sheet and strip for roofing, external cladding and internal lining - Product specification and requirements
- LST EN ISO 20482:2014 Metallic materials - Sheet and strip - Erichsen cupping test (ISO 20482:2013)
Danish Standards Foundation, sheet metal
- DS/EN 14783:2013 Fully supported metal sheet and strip for roofing, external cladding and internal lining - Product specification and requirements
AENOR, sheet metal
- UNE-EN 14783:2015 Fully supported metal sheet and strip for roofing, external cladding and internal lining - Product specification and requirements
ES-UNE, sheet metal
- UNE-EN ISO 10113:2020 Metallic materials - Sheet and strip - Determination of plastic strain ratio (ISO 10113:2020, Corrected version 2020-11)
- UNE-EN ISO 10275:2021 Metallic materials - Sheet and strip - Determination of tensile strain hardening exponent (ISO 10275:2020)
Association of German Mechanical Engineers, sheet metal
- DVS 2614-1-2009
- VDI 3418-2013 Realization of benchmarks for FE simulations of sheet metal forming - Planning, realization, evaluation, interpretation and documentation of practical tests
GM North America, sheet metal
- GM GM4471P-2012 Cup Ductility Test for Sheet and Strip Metal (Issue 5; Do Not Use on New Programs; Replaced by GMW16854)
RO-ASRO, sheet metal
- STAS 10417-1975 Tests of metals SIMPLE BEND TEST FOR LIGHT METAL AND LIGHT METAL ALLOY SHEETS AND STRIPS
ZA-SANS, sheet metal
- SANS 10275:2009 Metallic materials - Sheet and strip - Determination of tensile strain hardening exponent
Professional Standard - Non-ferrous Metal, sheet metal
TH-TISI, sheet metal
- TIS 2174-2004 Reverse bend test for metallic sheet and strip 3 mm thick or less [iso title: metallic materials.sheet and strip 3 mm thick or less.reverse bend test]