ZH
RU
ES

pc material

pc material, Total:64 items.

In the international standard classification, pc material involves: Plastics, Vocabularies, Tobacco, tobacco products and related equipment, Fibre optic communications, Printed circuits and boards.

国家市场监督管理总局、中国国家标准化管理委员会, pc material

GB/T 40006.7-2021 Plastics—Recycled plastics—Part 7: Polycarbonate(PC) materials
GB/T 1632.4-2020 Plastics—Determination of the viscosity of polymers in dilute solution using capillary viscometers—Part 4:Polycarbonate(PC) moulding and extrusion materials

Professional Standard - Chemical Industry, pc material

HG/T 3020-1999 Polycarbonate(PC) moulding and extrusion materials.Designation system

(U.S.) Ford Automotive Standards, pc material

FORD WSB-M4D627-A-2010 POLYCARBONATE (PC) MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D627-A2-2010 POLYCARBONATE (PC) MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M4D796-A1-2010 POLYCARBONATE (PC), MODIFIED, HIGH HEAT RESISTANT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M4D796-A2-2010 POLYCARBONATE (PC), MODIFIED, HIGH HEAT RESISTANT MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M4D797-A-2010 POLYCARBONATE (PC), 22% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D879-A3-2010 POLYCARBONATE + POLYETHYLENE TEREPHTHALATE BLEND (PC + PET) MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D796-A3-2010 POLYCARBONATE (PC), MODIFIED, HIGH FLOW AND HIGH HEAT RESISTANT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D926-A2-2010 POLYCARBONATE (PC), IMPACT MODIFIED, 25% MINIMUM RECYCLED CONTENT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***

British Standards Institution (BSI), pc material

BS EN ISO 7391-2:2006 Plastics - Polycarbonate (PC) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 7391-1:2006 Plastics - Polycarbonate (PC) moulding and extrusion materials - Designation system and basis for specifications
BS EN ISO 21305-1:2019 Tracked Changes. Plastics. Polycarbonate (PC) moulding and extrusion materials. Designation system and basis for specifications
BS EN ISO 21305-2:2019 Tracked Changes. Plastics. Polycarbonate (PC) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN 61755-3-6:2007 Fibre optic connector optical interfaces - Optical interface - 2, 5 mm and 1,25 mm diameter cylindrical 8 degrees angled-PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre
BS EN 61755-3-6:2006+A1:2012 Fibre optic connector optical interfaces. Optical interface. 2, 5 mm and 1,25 mm diameter cylindrical 8 degrees angled-PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre
BS EN 61755-3-6:2006 Fibre optic connector optical interfaces - Part 3-6: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre

Professional Standard - Tobacco, pc material

YC/T 271.7-2008 Tobacco machinery-Modality design-Part 7:PMMA and PC Observing windows

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, pc material

GB/T 35513.2-2017 Plastics—Polycarbonate (PC) moulding and extrusion materials—Part 2: Preparation of test specimens and determination of properties
GB/T 35513.1-2017 Plastics—Polycarbonate (PC) moulding and extrusion materials—Part 1: Designation system and basis for specifications

European Committee for Standardization (CEN), pc material

EN ISO 7391-2:1999 Plastics - Polycarbonate (PC) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties ISO 7391-2:1996
EN ISO 7391-2:2006 Plastics ?Polycarbonate (PC) moulding and extrusion materials ?Part 2: Preparation of test specimens and determination of properties

CEN - European Committee for Standardization, pc material

EN ISO 21305-1:2019 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 1: Designation system and basis for specifications
EN ISO 21305-2:2019 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties

Korean Agency for Technology and Standards (KATS), pc material

KS M ISO 7391-1:2006 Plastics－Polycarbonate(PC) moulding and extrusion materials－Part 1：Designation system and basis for specifications
KS M ISO 7391-2-2016(2021) Plastics－Polycarbonate(PC) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 7391-1-2006(2016) Plastics－Polycarbonate(PC) moulding and extrusion materials－Part 1：Designation system and basis for specifications
KS M ISO 7391-1-2006(2021) Plastics－Polycarbonate(PC) moulding and extrusion materials－Part 1：Designation system and basis for specifications

Japanese Industrial Standards Committee (JISC), pc material

JIS K 6719-1:2011 Plastics -- Polycarbonate (PC) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
JIS K 6719-2:2011 Plastics -- Polycarbonate (PC) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 6719-2:1999 Plastics -- Polycarbonate (PC) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties

Danish Standards Foundation, pc material

DS/EN ISO 7391-1:2006 Plastics – Polycarbonate (PC) moulding and extrusion materials – Part 1: Designation system and basis for specifications
DS/EN ISO 7391-2:2006 Plastics – Polycarbonate (PC) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties

KR-KS, pc material

KS M ISO 7391-2-2016 Plastics－Polycarbonate(PC) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties

International Organization for Standardization (ISO), pc material

ISO 21305-1:2019 Plastics — Polycarbonate (PC) moulding and extrusion materials — Part 1: Designation system and basis for specification
ISO 21305-2:2019 Plastics — Polycarbonate (PC) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
ISO 1628-4:1986 Plastics; Determination of viscosity number and limiting viscosity number; Part 4 : Polycarbonate (PC) moulding and extrusion materials
ISO 1628-4:1999 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 4: Polycarbonate (PC) moulding and extrusion materials

ES-UNE, pc material

UNE-EN ISO 21305-1:2020 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 21305-1:2019)
UNE-EN ISO 21305-2:2020 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21305-2:2019)

German Institute for Standardization, pc material

DIN EN ISO 21305-1:2019-05 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 21305-1:2019); German version EN ISO 21305-1:2019
DIN EN ISO 21305-2:2019-05 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21305-2:2019); German version EN ISO 21305-2:2019
DIN EN ISO 21305-2:2019 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21305-2:2019)
DIN EN ISO 21305-1:2019 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 21305-1:2019)
DIN EN ISO 21305-1:2017 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO/DIS 21305-1:2017); German and English version prEN ISO 21305-1:2017
DIN EN ISO 21305-2:2017 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO/DIS 21305-2:2017); German and English version prEN ISO 21305-2:2017
DIN EN 61755-3-6:2007 Fibre optic connector optical interfaces - Part 3-6: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre (IEC 61755-3-6:2006); German version

Association Francaise de Normalisation, pc material

NF EN ISO 21305-1:2019 Plastiques - Matériaux à base de polycarbonate (PC) pour moulage et extrusion - Partie 1 : système de désignation et base de spécifications
NF T53-032-1:2006 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 1 : designation system and basis for specifications.
NF C93-919-3-6/A1*NF EN 61755-3-6/A1:2012 Fibre optic connector optical interfaces - Part 3-6 : optical interface - 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre

American Society for Testing and Materials (ASTM), pc material

ASTM D3935-15 Standard Classification System and Basis for Specification for Polycarbonate (PC) Unfilled and Reinforced Material
ASTM D3935-21 Standard Classification System and Basis for Specification for Polycarbonate (PC) Unfilled and Reinforced Material

International Electrotechnical Commission (IEC), pc material

IEC 61755-3-5:2006 Fibre optic connector optical interfaces - Part 3-5: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre
IEC 61755-3-6:2006 Fibre optic connector optical interfaces - Part 3-6: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre
IEC 61755-3-6:2012 Fibre optic connector optical interfaces - Part 3-6: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre
IEC 61755-3-7:2009 Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 3-7: Optical interface 2,5 mm and 1,25 mm diameter cylindrical PC composite ferrule using titanium as fibre surrounding material, single mode

Lithuanian Standards Office , pc material

LST EN ISO 7391-1:2006 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 7391-1:2006)
LST EN ISO 7391-2:2006 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7391-2:2006)

AENOR, pc material

UNE-EN ISO 7391-1:2006 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 7391-1:2006)
UNE-EN ISO 7391-2:2006 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7391-2:2006)
UNE-ISO 1628-4:2013 Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 4: Polycarbonate (PC) moulding and extrusion materials

European Committee for Electrotechnical Standardization（CENELEC）, pc material

EN 61755-3-5:2006 Fibre optic connector optical interfaces Part 3-5: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre
EN 61755-3-6:2006 Fibre optic connector optical interfaces Part 3-6: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre (Incorporates Amendment A1: 2012)