ZH
RU
ES

95 of the standard deviation

95 of the standard deviation, Total:500 items.

In the international standard classification, 95 of the standard deviation involves: Metrology and measurement in general, Organic chemicals, Fasteners, Paint ingredients, Quality, Products of the textile industry, Software development and system documentation, Bottles. Pots. Jars, Linear and angular measurements, Aerospace electric equipment and systems, Textile fibres, Products of non-ferrous metals, Optics and optical measurements, Test conditions and procedures in general, Thermodynamics and temperature measurements, Open systems interconnection (OSI), Iron and steel products, Road vehicle systems, Applications of information technology, Cutting tools, Particle size analysis. Sieving, Audio, video and audiovisual engineering, Rotating machinery, Analytical chemistry, Paints and varnishes, Earthworks. Excavations. Foundation construction. Underground works, Road engineering, Information technology (IT) in general, Raw materials for rubber and plastics, Screw threads, Lighting, Coals, Occupational safety. Industrial hygiene, Pipeline components and pipelines, Packaging and distribution of goods in general, Packaging materials and accessories, Nuclear energy engineering, FOOD TECHNOLOGY, Shafts and couplings, Technical drawings, Tyres.

Aerospace Industries Association, 95 of the standard deviation

AIA NAS 335-2000 Screw, Shear, 100 Degree Standard Flush Head, Close Tolerance, 95 KSI Fsu ,Close Tolerance, 95 KSI Fsu FSC 5305; REV 14
AIA NAS 333-2000 Screw, Shear, 100 Degree Standard Flush Head, Close Tolerance, 95 KSI Fsu FSC 5305; REV 14
AIA NAS 333-340-2000 Screw, Shear, 100 Degree Standard Flush Head, Close Tolerance, 95 KSI Fsu FSC 5305; REV. 14
AIA NAS 334-2000 Screw, Shear, 100 Degree Standard Flush Head, Close Tolerance, 95 KSI Fsu FSC 5305; REV 14
AIA NAS 336-2000 Screw, Shear, 100 Degree Standard Flush Head, Close Tolerance, 95 KSI Fsu FSC 5305; REV 14
AIA NAS 337-2000 Screw, Shear, 100 Degree Standard Flush Head, Close Tolerance, 95 KSI Fsu FSC 5305; REV 14
AIA NAS 338-2000 Screw, Shear, 100 Degree Standard Flush Head, Close Tolerance, 95 KSI Fsu FSC 5305; REV 14
AIA NAS 339-2000 Screw, Shear, 100 Degree Standard Flush Head, Close Tolerance, 95 KSI Fsu FSC 5305; REV 14
AIA NAS 340-2000 Screw, Shear, 100 Degree Standard Flush Head, Close Tolerance, 95 KSI Fsu Fsc 5305; REV 14

Aerospace Industries Association/ANSI Aerospace Standards, 95 of the standard deviation

AIA/NAS NAS333-340-2012 SCREW, SHEAR, 100?STANDARD FLUSH HEAD, CLOSE TOLERANCE, 95 KSI Fsu Rev 15
AIA/NAS NAS333-340-2013 SCREW, SHEAR, 100?STANDARD FLUSH HEAD, CLOSE TOLERANCE, 95 KSI Fsu Rev.16
AIA/NAS NAS 333-2000 Screw, Shear, 100 Degree Standard Flush Head, Close Tolerance, 95 KSI Fsu FSC 5305; REV 14
AIA/NAS NAS 333-340-2000 Screw, Shear, 100 Degree Standard Flush Head, Close Tolerance, 95 KSI Fsu FSC 5305; REV. 14
AIA/NAS NAS 334-2000 Screw, Shear, 100 Degree Standard Flush Head, Close Tolerance, 95 KSI Fsu FSC 5305; REV 14
AIA/NAS NAS 335-2000 Screw, Shear, 100 Degree Standard Flush Head, Close Tolerance, 95 KSI Fsu ,Close Tolerance, 95 KSI Fsu FSC 5305; REV 14
AIA/NAS NAS 336-2000 Screw, Shear, 100 Degree Standard Flush Head, Close Tolerance, 95 KSI Fsu FSC 5305; REV 14
AIA/NAS NAS 337-2000 Screw, Shear, 100 Degree Standard Flush Head, Close Tolerance, 95 KSI Fsu FSC 5305; REV 14
AIA/NAS NAS 338-2000 Screw, Shear, 100 Degree Standard Flush Head, Close Tolerance, 95 KSI Fsu FSC 5305; REV 14
AIA/NAS NAS 339-2000 Screw, Shear, 100 Degree Standard Flush Head, Close Tolerance, 95 KSI Fsu FSC 5305; REV 14
AIA/NAS NAS 340-2000 Screw, Shear, 100 Degree Standard Flush Head, Close Tolerance, 95 KSI Fsu Fsc 5305; REV 14
AIA/NAS NAS 5319-2008 SCREW, SHEAR, 100 DEG FLUSH HEAD, CLOSE TOLERANCE, NAS1800 SIX LOBE RECESS, 95 KSI FSU Rev 2

American Society for Testing and Materials (ASTM), 95 of the standard deviation

ASTM D6091-03 Standard Practice for 99 %/95 % Interlaboratory Detection Estimate (IDE) for Analytical Methods with Negligible Calibration Error
ASTM D6091-97 Standard Practice for 99 %/95 % Interlaboratory Detection Estimate (IDE) for Analytical Methods with Negligible Calibration Error
ASTM D6091-07 Standard Practice for 99 %/95 % Interlaboratory Detection Estimate (IDE) for Analytical Methods with Negligible Calibration Error
ASTM D1718-09(2017) Standard Specification for Isobutyl Acetate (95 % Grade)
ASTM D6091-07(2014) Standard Practice for 99?%/95?% Interlaboratory Detection Estimate 40;IDE41; for Analytical Methods with Negligible Calibration Error
ASTM D2634-07(2021) Standard Specification for Methyl Amyl Acetate (95 % Grade)
ASTM D2634-86(1998) Standard Specification for Methyl Amyl Acetate (95% Grade)
ASTM D2634-02 Standard Specification for Methyl Amyl Acetate (95% Grade)
ASTM D2634-07 Standard Specification for Methyl Amyl Acetate (95 % Grade)
ASTM D2634-07(2013) Standard Specification for Methyl Amyl Acetate (95?% Grade)
ASTM D1718-03 Standard Specification for Isobutyl Acetate (95% Grade)
ASTM D1718-09 Standard Specification for Isobutyl Acetate (95% Grade)
ASTM D3887-96(2004) Standard Specification for Tolerances for Knitted Fabrics
ASTM D3887-96 Standard Specification for Tolerances for Knitted Fabrics
ASTM D3887-96(2008) Standard Specification for Tolerances for Knitted Fabrics
ASTM D2244-23 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2644-02(2007) Standard Tolerances for Yarns Spun on the Woolen System
ASTM D2644-81(1996)e1 Standard Tolerances for Yarns Spun on the Woolen System
ASTM D2644-02 Standard Tolerances for Yarns Spun on the Woolen System
ASTM D2644-12 Standard Tolerances for Yarns Spun on the Woolen System
ASTM E2164-08 Standard Test Method for Directional Difference Test
ASTM D2644-12(2018) Standard Tolerances for Yarns Spun on the Woolen System
ASTM E967-03 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM E967-08 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM E967-18 Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM E2862-18 Standard Practice for Probability of Detection Analysis for Hit/Miss Data
ASTM D1464-07 Standard Test Method for Differential Dyeing Behavior of Cotton
ASTM D2911-10 Standard Specification for Dimensions and Tolerances for Plastic Bottles
ASTM D2911-94(2005) Standard Specification for Dimensions and Tolerances for Plastic Bottles
ASTM D2911-94(2001) Standard Specification for Dimensions and Tolerances for Plastic Bottles
ASTM E2164-01(2007) Standard Test Method for Directional Difference Test
ASTM E2164-16 Standard Test Method for Directional Difference Test
ASTM D2911/D2911M-16 Standard Specification for Dimensions and Tolerances for Plastic Bottles
ASTM E967-08(2014) Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM D2244-09a Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-93(2000) Standard Test Method for Calculation of Color Differences From Instrumentally Measured Color Coordinates
ASTM D2244-21 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-22 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-15e1 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-07e1 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-09 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM E968-02(2008) Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters
ASTM D2244-15 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-15a Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-16 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2497-95 Standard Tolerances for Man-Made Organic-Base Filament Single Yarns
ASTM D2497-01 Standard Tolerances for Man-Made Organic-Base Filament Single Yarns
ASTM D2497-07(2018) Standard Tolerances for Manufactured Organic-Base Filament Single Yarns
ASTM D249-89(1996) Standard tolerances for manufactured organic-based filament single yarns
ASTM D2244-07 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-09b Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-11 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM E3040-15 Standard Test Method for Evaluation of Instrumental Color Difference with a Gray Scale
ASTM D2616-12 Standard Test Method for Evaluation of Visual Color Difference With a Gray Scale
ASTM D1464-90(2002) Standard Test Method for Differential Dyeing Behavior of Cotton
ASTM E1684-00 Standard Specification for Miniature Thermocouple Connectors
ASTM D1464-12 Standard Practice for Differential Dyeing Behavior of Cotton
ASTM E2164-01 Standard Test Method for Directional Difference Test
ASTM E2603-15 Standard Practice for Calibration of Fixed-Cell Differential Scanning Calorimeters
ASTM D1464-90(1996) Standard Test Method for Differential Dyeing Behavior of Cotton
ASTM D2497-07(2012) Standard Tolerances for Manufactured Organic-Base Filament Single Yarns
ASTM D1464-12(2019) Standard Practice for Differential Dyeing Behavior of Cotton
ASTM E2578-07 Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions
ASTM E2578-07(2018) Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions
ASTM E2578-07(2022) Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions
ASTM E968-02 Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters
ASTM E968-02(2014) Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters
ASTM E2069-00 Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters
ASTM D2244-02 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-02e1 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-05 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2906-97 Standard Practice for Statements on Precision and Bias for Textiles
ASTM D2906-97(2002) Standard Practice for Statements on Precision and Bias for Textiles
ASTM E2373-09 Standard Practice for Use of the Ultrasonic Time of Flight Diffraction (TOFD) Technique
ASTM D2645-07(2012) Standard Tolerances for Yarns Spun on the Cotton or Worsted Systems
ASTM E3040-18 Standard Practice for Evaluation of Instrumental Color Difference with a Gray Scale
ASTM E2729-16(2021) Standard Practice for Rectification of Spectrophotometric Bandpass Differences
ASTM E3040-22 Standard Practice for Evaluation of Instrumental Color Difference with a Gray Scale
ASTM E3040-16 Standard Practice for Evaluation of Instrumental Color Difference with a Gray Scale
ASTM E2729-16 Standard Practice for Rectification of Spectrophotometric Bandpass Differences
ASTM E2729-09 Standard Practice for Rectification of Spectrophotometric Bandpass Differences
ASTM D2616-19 Standard Test Method for Evaluation of Visual Color Difference With a Gray Scale
ASTM D3134-15(2019) Standard Practice for Establishing Color and Gloss Tolerances
ASTM D6617-00 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material
ASTM D6617-05 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material
ASTM D6617-08 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material
ASTM D4543-85(1991)e1 Standard Practices for Preparing Rock Core Specimens and Determining Dimensional and Shape Tolerances
ASTM D4543-01 Standard Practices for Preparing Rock Core Specimens and Determining Dimensional and Shape Tolerances
ASTM E2069-06(2018) Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters
ASTM E2069-19 Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters
ASTM E2603-15(2023) Standard Practice for Calibration of Fixed-Cell Differential Scanning Calorimeters
ASTM D2645-95(2001) Standard Tolerances for Yarns Spun on the Cotton or Worsted Systems
ASTM D2645-95 Standard Tolerances for Yarns Spun on the Cotton or Worsted Systems
ASTM D2645-07(2018) Standard Tolerances for Yarns Spun on the Cotton or Worsted Systems
ASTM D2911-94 Standard Specification for Dimensions and Tolerances for Plastic Bottles
ASTM D4695-03(2015) Standard Guide for General Pavement Deflection Measurements
ASTM D4695-03(2020) Standard Guide for General Pavement Deflection Measurements
ASTM D2911/D2911M-16(2023) Standard Specification for Dimensions and Tolerances for Plastic Bottles
ASTM E2578-07(2012) Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions
ASTM D6617-17 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material
ASTM D6617-21 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material
ASTM D3134-97(2003) Standard Practice for Establishing Color and Gloss Tolerances
ASTM D3134-97 Standard Practice for Establishing Color and Gloss Tolerances
ASTM D3134-97(2008)e1 Standard Practice for Establishing Color and Gloss Tolerances
ASTM D4356-84(1996) Standard Practice for Establishing Consistent Test Method Tolerances
ASTM D3134-15 Standard Practice for Establishing Color and Gloss Tolerances
ASTM E2603-08 Standard Practice for Calibration of Fixed-Cell Differential Scanning Calorimeters
ASTM D1729-96 Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
ASTM D2645-07 Standard Tolerances for Yarns Spun on the Cotton or Worsted Systems
ASTM E1543-00(2006) Standard Test Method for Noise Equivalent Temperature Difference of Thermal Imaging Systems
ASTM E2253-03 Standard Method for Enthalpy Measurement Validation of Differential Scanning Calorimeters
ASTM D1729-96(2003) Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
ASTM E1543-00 Standard Test Method for Noise Equivalent Temperature Difference of Thermal Imaging Systems
ASTM D4821-99 Standard Guide for Carbon Black8212;Validation of Test Method Precision and Bias
ASTM D4821-01a Standard Guide for Carbon Black8212;Validation of Test Method Precision and Bias
ASTM D1729-96(2009) Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
ASTM E2253-08e1 Standard Method for Enthalpy Measurement Validation of Differential Scanning Calorimeters
ASTM E1543-00(2011) Standard Test Method for Noise Equivalent Temperature Difference of Thermal Imaging Systems
ASTM E1543-14 Standard Practice for Noise Equivalent Temperature Difference of Thermal Imaging Systems
ASTM D4821-16 Standard Guide for Carbon Black&x2014;Validation of Test Method Precision and Bias
ASTM D2244-14 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM E805-94 Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials
ASTM D6518-02 Standard Practice for Bias Testing a Mechanical Coal Sampling System
ASTM D6518-03 Standard Practice for Bias Testing a Mechanical Coal Sampling System
ASTM D6518-02a Standard Practice for Bias Testing a Mechanical Coal Sampling System
ASTM D3670-91(2001) Standard Guide for Determination of Precision and Bias of Methods of Committee D22
ASTM D6518-06e1 Standard Practice for Bias Testing a Mechanical Coal Sampling System
ASTM D6518-06 Standard Practice for Bias Testing a Mechanical Coal Sampling System
ASTM E1543-14(2018) Standard Practice for Noise Equivalent Temperature Difference of Thermal Imaging Systems
ASTM E1543-14(2022) Standard Practice for Noise Equivalent Temperature Difference of Thermal Imaging Systems
ASTM F1181-19 Standard Test Method for Measuring Binocular Disparity in Transparent Parts
ASTM E805-12a(2017) Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials
ASTM D4821-14 Standard Guide for Carbon Blackmdash;Validation of Test Method Precision and Bias
ASTM C1215-92(1997) Standard Guide for Preparing and Interpreting Precision and Bias Statements in Test Method Standards Used in the Nuclear Industry
ASTM C1215-18 Standard Guide for Preparing and Interpreting Precision and Bias Statements in Test Method Standards Used in the Nuclear Industry
ASTM D4821-06 Standard Guide for Carbon Black-Validation of Test Method Precision and Bias
ASTM D4821-07 Standard Guide for Carbon Black-Validation of Test Method Precision and Bias
ASTM D4821-04 Standard Guide for Carbon Black8212;Validation of Test Method Precision and Bias
ASTM D4821-03 Standard Guide for Carbon Black8212;Validation of Test Method Precision and Bias
ASTM D4821-03a Standard Guide for Carbon Black8212;Validation of Test Method Precision and Bias
ASTM E2729-09(2015) Standard Practice for Rectification of Spectrophotometric Bandpass Differences
ASTM E1486-98(2004) Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria

American National Standards Institute （ANSI), 95 of the standard deviation

ASTM D1718-09(2023) Standard Specification for Isobutyl Acetate (95 % Grade)
ANSI H35.2-2013 Standard Dimensional Tolerances for Aluminum Mill Products
ANSI H35.2M-2013 Standard Dimensional Tolerances for Aluminum Mill Products
ANSI/ASTM D6617:2021 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material

AENOR, 95 of the standard deviation

UNE 66053:1978 ESTIMATION OF THE VARIANCE OR OF THE STANDARD DEVIATION OF A LOT
UNE 66055:1982 COMPARISON OF TWO VARIANCES OR TWO STANDARD DEVIATIONS
UNE 66054:1978 COMPARISON OF THE VARIANCE OR OF THE STANDARD DEVIATION OF A LOT WITH A GIVEN VALUE
UNE 66056:1978 ESTIMATION OF THE RATIO OF TWO VARIANCES OR OF TWO STANDARD DEVIATIONS
UNE-EN ISO 12818:2015 Glass packaging - Standard tolerances for flaconnage (ISO 12818:2013)
UNE 1128:1995 TECHNICAL DRAWINGS. GEOMETRICAL TOLERANCING. DATUMS AND DATUM-SYSTEMS FOR GEOMETRICAL TOLERANCES.

American Society of Mechanical Engineers (ASME), 95 of the standard deviation

ASME SEC V B SE-709-2001 Standard Guide for Magnetic Particle Examination ASTM E709-95
ASME SEC V B SE-165-2001 Standard Test Method for Liquid Penetrant Examination ASTM E165-95

HU-MSZT, 95 of the standard deviation

Japanese Industrial Standards Committee (JISC), 95 of the standard deviation

JIS Z 9042:1962 Significance test of difference between the population mean and the standard (standard deviation known, one-sided)
JIS Z 9043:1962 Significance test of difference between the population mean and the standard (standard deviation known, two-sided)
JIS Z 9044:1962 Significance test of difference between the population mean and the standard (standard deviation unknown, one-sided)
JIS Z 9045:1962 Significance test of difference between the population mean and the standard (standard deviation unknown, two-sided)
JIS Z 9046:1965 Significance test of difference between the two population means (standard deviations known, one-sided)
JIS Z 9047:1979 Significance test of difference between the two population means (standard deviations known, two-sided)
JIS Z 9048:1979 Significance test of difference between the two population means (standard deviations unknown, one-sided)
JIS Z 9049:1965 Significance test of difference between the two population means (standard deviations unknown, two-sided)
JIS B 0401-2:1998 ISO system of limits and fits -- Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts
JIS Z 9052:1963 Interval estimation of the difference between two population means (standard deviations known)
JIS Z 9053:1963 Interval estimation of the difference between two population means (standard deviations unknown)
JIS B 0419:1991 General tolerances -- Part 2: Geometrical tolerances for features without individual tolerance indications
JIS Z 9010:1979 Sequential sampling inspection plans for percent defectives having desired operating characteristics by variables (standard deviation known)
JIS B 0417:1979 Permissible deviation in dimensions without tolerance indication for gas cut steel plates
JIS B 0022:1984 Datums and datum-systems for geometrical tolerances

GM North America, 95 of the standard deviation

GM 9985036-1980 Oil Differential (Standard)
GM 9985055-1980 Oil Differential (Standard) SAE 80
GM 9985154-1996 Lubricant - Hypoid Gear, Standard Differential
GM 9985044-1996 Lubricant, Hypoid Gear, Standard Differential, 80W

ES-UNE, 95 of the standard deviation

UNE 66055:1983 ERRATUM COMPARISON OF TWO VARIANCES OR TWO STANDARD DEVIATIONS
UNE-EN 2240-012:2010 Aerospace series - Lamps, incandescent - Part 012: Lamp, code 95 - Product standard (Endorsed by AENOR in April of 2010.)

Korean Agency for Technology and Standards (KATS), 95 of the standard deviation

KS K 0042-2011 Standard tolerances for knit goods
KS A 3252-2002 SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION KNOWN, ONE-SIDED)
KS A 3252-1985 SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION KNOWN, ONE-SIDED)
KS K 0044-2022 Standard tolerances for yarn spun on the woolen system
KS K 0044-1986 Standard tolerances for yarn spun on the woolen system
KS A 3252-1968(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION KNOWN, ONE-SIDED)
KS A 3253-1969(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION KNOWN, TWO-SIDED)
KS A 3253-2002 SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION KNOWN, TWO-SIDED)
KS A 3254-2002 SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION UNKNOWN, ONE-SIDED)
KS A 3255-2002 SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION UNKNOWN, TWO-SIDED)
KS A 3262-1969(2001) INTERVAL ESTIMATION OF THE DIFFERENCE BETWEEN TWO POPULATION MEANS(STANDARD DEVIATIONS UNKNOWN)
KS K 0046-2012 Standard tolerances for yarns spun on the cotton or worsted systems
KS K 0042-2017 Standard tolerances for knit goods
KS K 0042-1975 Standard tolerances for knit goods
KS K 0046-1976 Standard tolerances for yarns spun on the cotton or worsted systems
KS K 0044-2016 Standard tolerances for yarn spun on the woolen system
KS K 0040-2011 Standard tolerances for manufactured organic-base man-made filament single yarns
KS K 0044-2016(2021) Standard tolerances for yarn spun on the woolen system
KS A 3254-1969(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION UNKNOWN, ONE-SIDED)
KS A 3254-1987 SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION UNKNOWN, ONE-SIDED)
KS B 0507-1975(2011) Roughness Comparison Specimens
KS A 3255-1969(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION UNKNOWN, TWO-SIDED)
KS A 3255-1987 SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION UNKNOWN, TWO-SIDED)
KS A 3262-2002 INTERVAL ESTIMATION OF THE DIFFERENCE BETWEEN TWO POPULATION MEANS(STANDARD DEVIATIONS UNKNOWN)
KS A 3262-1986 INTERVAL ESTIMATION OF THE DIFFERENCE BETWEEN TWO POPULATION MEANS(STANDARD DEVIATIONS UNKNOWN)
KS K 0045-2007 Standard tolerances for tire cords made from man-made fibers
KS K 0045-1982 Standard tolerances for tire cords made from man-made fibers
KS K 0042-2022 Standard specification for tolerances for knitted fabrics
KS A 3256-1969(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEANS (STANDARD DEVIATIONS KNOWN, ONE-SIDED)
KS A 3256-2002 SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEANS (STANDARD DEVIATIONS KNOWN, ONE-SIDED)
KS A 3259-2002 SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEANS (STANDARD DEVIATIONS UNKNOWN, TWO-SIDED)
KS A 3263-2002 INTERVAL ESTIMATION OF THE DIFFERENCE BETWEEN TWO POPULATION MEANS(STANDARD DEIVATIONS UNKNOWN)
KS Q 0001-2010 Single sampling inspection plans by variables having desired operating characteristics(known standard deviation)
KS Q 0001-2013 Single sampling inspection plans by variables and attributes
KS A 3260-2002 INTERVAL ESTIMATION OF THE POPULATION MEANS (STANDARD DEVIATION KNOWN)
KS A 3261-2002 INTERVAL ESTIMATION OF THE POPULATION MEANS (STANDARD DEVIATIONUNKNOWN)
KS A 3260-1986 INTERVAL ESTIMATION OF THE POPULATION MEANS (STANDARD DEVIATION KNOWN)
KS K 0040-2019 Standard tolerances for manufactured organic-base man-made filament single yarns
KS K 0040-1975 Standard tolerances for manufactured organic-base man-made filament single yarns
KS A 3260-1969(2001) INTERVAL ESTIMATION OF THE POPULATION MEANS (STANDARD DEVIATION KNOWN)
KS K 0046-2017 Standard tolerances for yarns spun on the cotton or worsted systems
KS K 0044-2011 Standard tolerances for yarn spun on the woolen system
KS A 3257-1991(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE TWO POPULATION MEANS(STANDARD DEVIATIONS KNOWN, TWO-SIDED)
KS K 0040-2016 Standard tolerances for manufactured organic-base man-made filament single yarns
KS A 3265-1971(2001) SIGNIFICANCE TEST OF EQUALITY OF THE POPULATION VARIANCES AND THE STANDARD (TWO-SIDED)
KS K 0041-2006 Standard tolerances for cotton and cotton man－made fiber blend fabrics
KS A 3265-1985 SIGNIFICANCE TEST OF EQUALITY OF THE POPULATION VARIANCES AND THE STANDARD (TWO-SIDED)
KS B ISO 286-2:2009 ISO system of limits and fits-Part 2:Tables of standard tolerance grades and limit deviations for holes and shafts
KS B ISO 286-2:2014 ISO system of limits and fits-Part 2:Tables of standard tolerance grades and limit deviations for holes and shafts
KS B ISO 286-2:2015 Geometrical product specifications(GPS) — ISO code system fortolerances on linear sizes — Part 2: Tables of standard toleranceclasses and limit deviations for holes and shafts
KS A 3259-1969(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEANS (STANDARD DEVIATIONS UNKNOWN, TWO-SIDED)
KS A 3265-2002 SIGNIFICANCE TEST OF EQUALITY OF THE POPULATION VARIANCES AND THE STANDARD (TWO-SIDED)
KS B 0213-1974 Limits and Tolerances for Unified Coarse Screw Threads
KS B 0216-1974 Limits and Tolerances for Unified Fine Screw Threads
KS B ISO 286-2:2020 Geometrical product specifications(GPS) — ISO code system for tolerances on linear sizes — Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
KS A 3258-1991(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE TWO POPULATION MEANS(STANDARD DEVIATIONS UNKNOWN, ONE-SIDED)
KS B 0146-2006 GENERAL TOLERANCES-PART2:GEOMETRICAL TOLERANCES FOR FEATURES WITHOUT INDIVIDUAL TOLERANCE INDICATIONS
KS T 2015-2010 Tolerances of rack structure for automatic highrised warehouse
KS T 1349-2011 Standard test methods for determining the effects of high altitude on packaging systems by vacuum method
KS A 3264-2002 SIGNIFICANCE TEST OF EQUALITY OF THE POPULATION VARIANCE AND THE STANDARD (ONE-SIDED)
KS A 3264-1971 SIGNIFICANCE TEST OF EQUALITY OF THE POPULATION VARIANCE AND THE STANDARD (ONE-SIDED)

AASHTO - American Association of State Highway and Transportation Officials, 95 of the standard deviation

T 59-1997 Standard Specification for Testing Emulsified Asphalts (Nineteenth Edition; ASTM D244-95)
M92-1996 Standard Specification for Wire-Cloth Sieves for Testing Purposes (Nineteenth Edition; ASTM E11-95)
M169-1997 Standard Specification for Steel Bars@ Carbon@ Cold-Finished@ Standard Quality (Twentieth Edition; ASTM A108-95)
T 201-1995 Standard Specification for Kinematic Viscosity of Asphalts (Bitumens) (Nineteenth Edition; ASTM D2170-95)
M103M/M103-1997 Standard Specification for Steel Castings@ Carbon@ for General Application (Nineteenth Edition; ASTM A27/A27M-95)
M175-1997 Standard Specification for Perforated Concrete Pipe (Nineteenth Edition; ASTM C444-95)
T157-1997 Standard Specification for Air-Entraining Admixtures for Concrete (Nineteenth Edition; ASTM C233-95)
M154-1997 Standard Specification for Air-Entraining Admixtures for Concrete (Nineteenth Edition; ASTM C260-95)
M 270M/M 270-1996 Standard Specification for Stuctural Steel for Bridges (Eighteenth Edition; ASTM A709/A709M-95)
M176-1998 Standard Specification for Porous Concrete Pipe (Twentieth Edition; ASTM C654-95)
T49-1997 Standard Method of Test for Penetration of Bituminous Materials (Twentieth Edition; ASTM D5-95)
M107-1997 Standard Specification for Bronze Castings for Bridges and Turntables (Nineteenth Edition; ASTM B22-95)
T 133-1998 Standard Specification of Test for Density of Hydraulic Cement (ASTM Designation: C 188-95)
M171-1997 Standard Specification for Sheet Materials for Curing Concrete (Nineteenth Edition; ASTM C171-95)
T197-1997 Standard Specification for Time of Setting of Concrete Mixtures by Penetration Resistance (Nineteenth Edition; ASTM C403-95)
M 92-1996 Standard Specification for Wire-Cloth Sieves for Testing Purposes (HM-22; PART IA; ASTM Designation: E 11-95)
T186-1997 Standard Specification for Early Stiffening of Hydraulic Cement (Paste Method) (Nineteenth Edition; ASTM C451-95)
M232M/M232-1997 Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware (Nineteenth Edition; ASTM A153/A153M-95)
M175M-1997 Standard Specification for Perforated Concrete Pipe (Metric) (Nineteenth Edition; ASTM C444M-95)
M176M-1998 Standard Specification for Porous Concrete Pipe (Metric) (Twentieth Edition; ASTM C654M-95)
T50-1993 Standard Specification for Float Test for Bituminous Materials (Nineteenth Edition; ASTM D139-95)
T155-1991 Standard Method of Test for Water Retention by Concrete Curing Materials (Twentieth Edition; ASTM C156-95)
M 279-1997 Standard Specification for Zinc-Coated (Galvanized) Steel Woven Wire Fence Fabric (Nineteenth Edition; ASTM A116-95)
M17-1995 Standard Specification for Mineral Filler for Bituminous Paving Mixtures (Nineteenth Edition; ASTM D242-95)
M 17-1995 Standard Specification for Mineral Filler for Bituminous Paving Mixtures (ASTM Designation: ASTM D242-95 (2000))
T 137-1997 Standard Specification for Air Content of Hydraulic Cement Mortar (Nineteenth Edition; ASTM C185-95)
M196-1992 Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains (Twentieth Edition; ASTM B745/B745M-95)
M102M/M102-1996 Standard Specification for Steel Forgings@ Carbon and Alloy@ for General Industrial Use (Eighteenth Edition; ASTM A668M/A668-95)
M86-1998 Standard Specification for Concrete Sewer@ Storm Drain@ and Culvert Pipe (Twentieth Edition; ASTM C14-95)
M86M-1998 Standard Specification for Concrete Sewer@ Storm Drain@ Culvert Pipe (Metric) (Nineteenth Edition; ASTM C14M-95)
T 192-1997 Standard Specification for Fineness of Hydraulic Cement by the 45-Micrometer (No. 325) Sieve (Nineteenth Edition; ASTM C430-95)
T47-1998 Standard Method of Test for Loss on Heating of Oil and Asphaltic Compounds (ASTM Designation: D 6-95 (2000))
M302-1997 Standard Specification for Ground Granulated Blast-Furnace Slag for Use in Concrete and Mortars (Nineteenth Edition; ASTM C989-95)
M 175-1997 Standard Specification for Perforated Concrete Pipe (HM-22: Part IA; ASTM Designation: C444-95)
T 49-1997 Standard Method of Test for Penetration of Bituminous Materials (HM-22; Part IIA; ASTM Designation D 5-95)
M 107-1997 Standard Specification for Bronze Castings for Bridges and Turntables (HM-22; PART IA; ASTM Designation: B 22-95)
M 103M/M 103-1997 Standard Specification for Steel Castings@ Carbon@ for General Application (HM-22; PART IA; ASTM Designation: A 27/A 27M-95)
M163M/M163-1997 Standard Specification for Castings@ Iron-Chromium@ Iron-Chromium-Nickel@ Corrosion Resistant@ for General Application (Nineteenth Edition; ASTM A743/A743M-95)
T 23-1997 Standard Method of Test for Making and Curing Concrete Test Specimens in the Field (Twentieth Edition; ASTM C 31-95)
T 213M/T 213-1997 Standard Method of Test for Mass [Weight] of Coating on Aluminum-Coated Iron or Steel Articles (Twentieth Edition; ASTM A428/A428M-95)
T 201-2001 Standard Method of Test for Kinematic Viscosity of Asphalts (Bitumens) (HM-22; Part IIB; ASTM Designation D 2170-95)
T 47-1998 Standard Method of Test for Loss on Heating of Oil and Asphaltic Compounds (ASTM Designation: D 6-95 (2000); No Replacement)
M 175M-1997 Standard Specification for Perforated Concrete Pipe (Metric) (HM-22; Part IA; ASTM Designation C 444M-95)
T 155-1991 Standard Method of Test for Water Retention by Concrete Curing Materials (HM-22; Part IIA; ASTM Designation: C 156-95)
T 243M/T 243-1997 Standard Method of Test for Sampling Procedure for Impact Testing of Structural Steel (HM-22; PART IIB; ASTM A 673/A 673M-95)
M 292M/M 292-1996 Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure and High-Temperature Service (Eighteenth Edition; ASTM A194/A194M-95)

ISA - International Society of Automation, 95 of the standard deviation

ISA ROAD INTGRTN-2007 The Road to Integration: A Guide to Applying the ISA-95 Standard in Manufacturing

British Standards Institution (BSI), 95 of the standard deviation

BS ISO 17258:2015 Statistical methods. Six Sigma. Basic criteria underlying benchmarking for Six Sigma in organisations
BS EN 2240-012:2010 Aerospace series - Lamps, incandescent - Lamp, code 95 - Product standard
BS EN ISO 12818:2015 Glass packaging. Standard tolerances for flaconnage
BS EN 15904:2010 Glass packaging. Standard tolerances for flaconnage
BS ISO 9058:2008 Glass containers - Standard tolerances for bottles
BS EN ISP 10607-5:1997 Information technology - International standardized profiles AFTnn - File transfer, access and management - AFT22 - Positional file access service (flat) (regional variant of ISO/IEC ISP 10607-5:1995)
BS ISO 12818:2013 Glass packaging. Standard tolerances for flaconnage
BS EN ISO 286-2:1990 Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes. Tables of standard tolerance classes and limit deviations for holes and shafts
BS CWA 15236:2005 Analysis of standardization requirements and standardization gaps for eprocurement in Europe
BS ISO 13053-1:2011 Quantitative methods in process improvement. Six Sigma. DMAIC methodology
BS EN ISO 286-2:2010 Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes. Tables of standard tolerance classes and limit deviations for holes and shafts
BS ISO 13053-2:2011 Quantitative methods in process improvement. Six Sigma. Tools and techniques
BS EN 22768-2:1993 General tolerances - Geometrical tolerances for features without individual tolerance indications

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., 95 of the standard deviation

IEEE 603-1991 Standard Criteria for Safety Systems for Nuclear Power Generating Stations (Correction Sheet 1/30/95)

The American Road & Transportation Builders Association, 95 of the standard deviation

AASHTO T 201-2001 Standard Method of Test for Kinematic Viscosity of Asphalts (Bitumens) HM-22; Part IIB; ASTM Designation D 2170-95
AASHTO M176-1998 Standard Specification for Porous Concrete Pipe Twentieth Edition; ASTM C654-95
AASHTO M279-1997 Standard Specification for Zinc-Coated (Galvanized) Steel Woven Wire Fence Fabric Twentieth Edition; ASTM A116-95
AASHTO M 175-1997 Standard Specification for Perforated Concrete Pipe HM-22: Part IA; ASTM Designation: C444-95 R(2001)
AASHTO M 103M/M 103-1997 Standard Specification for Steel Castings, Carbon, for General Application HM-22; PART IA; ASTM Designation: A 27/A 27M-95 R(2001)
AASHTO M17-1995 Standard Specification for Mineral Filler for Bituminous Paving Mixtures Twentieth Edition; ASTM D242-95 R(1999)
AASHTO T 49-1997 Standard Method of Test for Penetration of Bituminous Materials HM-22; Part IIA; ASTM Designation D 5-95 R(2001)
AASHTO M176M-1998 Standard Specification for Porous Concrete Pipe (Metric) Twentieth Edition; ASTM C654M-95
AASHTO M 175M-1997 Standard Specification for Perforated Concrete Pipe (Metric) HM-22; Part IA; ASTM Designation C 444M-95 R(2001)
AASHTO T 155-1991 Standard Method of Test for Water Retention by Concrete Curing Materials HM-22; Part IIA; ASTM Designation: C 156-95 R(2001)
AASHTO M86-1998 Standard Specification for Concrete Sewer, Storm Drain, and Culvert Pipe Twentieth Edition; ASTM C14-95
AASHTO T47-1998 Standard Method of Test for Loss on Heating of Oil and Asphaltic Compounds Twentieth Edition; ASTM D6-95
AASHTO M 107-1997 Standard Specification for Bronze Castings for Bridges and Turntables HM-22; PART IA; ASTM Designation: B 22-95 R(2001)
AASHTO M86M-1998 Standard Specification for Concrete Sewer, Storm Drain, Culvert Pipe (Metric) Twentieth Edition; ASTM C14M-95
AASHTO T 53-1996 Standard Method of Test for Softening Point of Bitumen (Ring-and-Ball Apparatus) HM-22; Part IIA; ASTM Designation D 36-95 R(2000)
AASHTO T 213M/T 213-1997 Standard Method of Test for Mass [Weight] of Coating on Aluminum-Coated Iron or Steel Articles HM-22; Part IIB; ASTM Designation A 428/A 428M-95 R(2001)
AASHTO M 92-1996 Standard Specification for Wire-Cloth Sieves for Testing Purposes HM-22; PART IA; ASTM Designation: E 11-95 R(2000)
AASHTO M196-1992 Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains Twentieth Edition; ASTM B745/B745M-95 R(2000)
AASHTO T 126-2001 Standard Method of Test for Making and Curing Concrete Test Specimens in the Laboratory HM-22; Part IIA; ASTM Designation: C 192/C 192M-95
AASHTO T 11-1997 Standard Method of Test for Materials Finer Than 75-um (No. 200) Sieve in Mineral Aggregates by Washing HM-22; Part IIA; ASTM Designation C 117-95 R(2000)

Institute of Electrical and Electronics Engineers/Electronic Industry Association, 95 of the standard deviation

IEEE/EIA 12207.0-1996 Industry implementation of International Standard ISO/IEC 12207:1995 - Standard for information technology - Software life cycle processes

Association Francaise de Normalisation, 95 of the standard deviation

NF X06-060:1987 Applications de la statistique - Estimation d'une variance - (d'un écart-type).
NF X06-061:1987 Applications de la statistique - Comparaison d'une variance (d'un écart-type) à une valeur donnée
NF EN ISO 12818:2015 Emballages en verre - Tolérances standard pour flaconnage
NF X06-062:1987 Applications de la statistique - Estimation du rapport de deux variances - (deux écarts-types).
NF Z70-700-4:1996 INFORMATION TECHNOLOGY. INTERNATIONAL STANDARDIZED PROFILES AFTNN. FILE, TRANSFER, ACCESS AND MANAGEMENT. PART 4 : AFT12. POSITIONAL FILE TRANSFER SERVICE (FLAT). (REGIONAL VARIANT OF ISO/CEI ISP 10607-4:1995). (EUROPEAN STANDARD EN ISP 10607-4).
NF Z70-700-3:1996 INFORMATION TECHNOLOGY. INTERNATIONAL STANDARDIZED PROFILES AFTNN. FILE TRANSFER, ACCESS AND MANAGEMENT. PART 3 : AFT11. SIMPLE FILE TRANSFER SERVICE (UNSTRUCTURED). (REGIONAL VARIANT OF ISO/CEI ISP 10607-3:1995). (EUROPEAN STANDARD EN ISP 10607-3).
NF H35-213:2011 Glass packaging - Standard tolerances for flaconnage.
NF H35-213*NF EN ISO 12818:2015 Glass packaging - Standard tolerances for flaconnage
CWA 15236:2005 Analysis of standardization requirements and standardization gaps for eProcurement in Europe
NF E75-079:1987 COATED ABRASIVE PRODUCTS. DIMENSIONAL TOLERANCES ON NON-STANDARD CONVERSIONS.
NF X06-063:1987 Applications de la statistique - Comparaison du rapport de deux variances - (deux écarts-types) à une valeur donnée.
NF L55-050-012*NF EN 2240-012:2010 Aerospace series - Lamps, incandescent - Part 012 : lamp, code 95 - Product standard
NF EN 2240-012:2010 Série aérospatiale - Lampes à incandescence - Partie 012 : lampe, code 95 - Norme de produit
NF P97-401:1977 Lighting columns. Dimensions and tolerances.

International Organization for Standardization (ISO), 95 of the standard deviation

ISO 9058:2008 Glass containers - Standard tolerances for bottles
ISO 12818:2013 Glass packaging - Standard tolerances for flaconnage
ISO 8366:1987 Coated abrasive products; Dimensional tolerances on non-standard conversions
ISO 18404:2015 Quantitative methods in process improvement - Six Sigma - Competencies for key personnel and their organizations in relation to Six Sigma and Lean implementation
ISO 2768:1973 Permissible machining variations in dimensions without tolerance indication
ISO 286-2:1988 ISO system of limits and fits; part 2: tables of standard tolerance grades and limit deviations for holes and shafts

RO-ASRO, 95 of the standard deviation

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, 95 of the standard deviation

GB 1800-1979 Tolerance and fitting,generalities,standard tolerances and basic deviations
GB/T 1800.4-1999 Limits and fits Tables of standard tolerance grades and limit deviations for holes and shafts
GB/T 1800.3-1998 Limits and fits--Bases--Part 3: Numerical values tables of standard toleranes and fundamental deviations

Professional Standard - Agriculture, 95 of the standard deviation

GB/T 1800-1979 General Tolerance and Fit Standard Tolerance and Basic Deviation

Taiwan Provincial Standard of the People's Republic of China, 95 of the standard deviation

CNS 8550-1983 Significance Test of Differencece Between the Two Population Means(Standard Deviations Known, Two - Sided)
CNS 8879-1983 Interval Estimation of the Difference Between Two Population Means(Standard Deviations Known)
CNS 8549-1983 Significance Test of Difference Between the Two Population Means (Standard Deviations, Known, One-Side)
CNS 8746-1983 Significance Test of Difference Between the Two Population Means (Standard Deviations Unknown, Two-Sided)
CNS 8745-1983 Significance Test of Difference Between the Two Population Means(Standard Deviations Unknown, One-Sided)
CNS 8880-1983 Interval Estimation of the Difference Between Two Population Means (Standard Deviations Known)
CNS 8461-1983 Significance Test of Difference Between the Population Mean and the Standard (Standard Deviation Unknown One - Sided)
CNS 8460-1983 Significance Test of Difference Between the Population Mean and the Standard (Standard Deviation Known, Two - Sided)
CNS 8462-1983 Significance Test of Difference Between the Population Mean and the Standard (Standard Deviation Unknown ,Two -Sided)
CNS 8459-1983 Significance Test of Difference Between the Population Mean and the Standart (Standard Deviation Known ,One - Sided)

(U.S.) Ford Automotive Standards, 95 of the standard deviation

FORD WSS-M4C122-A-2003 GASOLINE, UNLEADED, 95 RON ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4C122-B-2003 GASOLINE, UNLEADED, 95 RON ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESH-M11A12-A-2005 SOLDER, 5 SN/95 PB, ALLOYING PIG ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESD-M4C103-A-2004 GASOLINE, UNLEADED, 95 RON 0.003 g/L LEAD ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4C118-A-2010 FUEL, E24, 95 RON, UNLEADED, INITIAL FILL, ARGENTINA ***TO BE USED WITH FORD WSS-M99P1111-A***

Danish Standards Foundation, 95 of the standard deviation

DS/EN 15904:2011 Glass packaging - Standard tolerances for flaconnage
DS/ISO 9058:2008 Glass containers - Standard tolerances for bottles
DS/EN 2240-012:2010 Aerospace series - Lamps, incandescent - Part 012: Lamp, code 95 - Product standard
DS/EN 20286-2:1993 ISO system of limits and fits. Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts
DS/EN ISO 286-2:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
DS/EN ISO 286-2/AC:2013 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts

Lithuanian Standards Office , 95 of the standard deviation

LST EN 15904-2011 Glass packaging - Standard tolerances for flaconnage
LST EN 2240-012-2010 Aerospace series - Lamps, incandescent - Part 012: Lamp, code 95 - Product standard
LST EN ISO 12818:2015 Glass packaging - Standard tolerances for flaconnage (ISO 12818:2013)

German Institute for Standardization, 95 of the standard deviation

DIN EN ISO 12818:2015-08 Glass packaging - Standard tolerances for flaconnage (ISO 12818:2013); German version EN ISO 12818:2015
DIN 7172:1991-04 Tolerances and limit deviations for sizes above 3150 mm up to 10000 mm; principles, standard tolerances and limit deviations
DIN ISO 286-2:1990 ISO system of limits and fits; tables of standard tolerance grades and limit deviations for holes and shafts; identical with ISO 286-2:1988
DIN 7172:1991 Tolerances and limit deviations for sizes above 3150 mm up to 10000 mm; principles, standard tolerances and limit deviations
DIN EN ISO 1127:1997 Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length (ISO 1127:1992); German version EN ISO 1127:1996
DIN EN ISO 286-2:2019-09 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010 + Cor 1:2013); German version EN ISO 286-2:2010 + AC:2013

ACI - American Concrete Institute, 95 of the standard deviation

ACI 307R-1995 Commentary on Standard Practice for the Design and Construction of Reinforced Concrete Chimneys (ACI 307-95)
ACI 117-1990 Standard Specification for Tolerances for Concrete Construction and Materials
ACI 117/117R-1990 Standard Specification for Tolerances for Concrete Construction and Materials
ACI 117R-1990 Commentary on Standard Specifications for Tolerances for Concrete Construction and Materials

NL-NEN, 95 of the standard deviation

NEN 2890-1990 Derivation of target sizes from modular sizes of building elements

NATO - North Atlantic Treaty Organization, 95 of the standard deviation

STANAG 4133-1992 Method of Specifying Electrical Power Supplies: Standard Types of Electrical Power (ED 2 AMD 1 Amendment 1@ 11/27/95; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@
STANAG 4140-1976 Adoption of a Standard Target Acquisition Meteorological Message (ED 1 AMD 5 Amendment 5@ 7/31/95; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2 – 7
STANAG 1310-1989 Design Criteria for Replenishment Aspects of New Construction Naval Vessels; (ED 1 AMD 2 Amendment 2@ 2/9/95; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +
STANAG 3995-1989 Marking of Portable Fire Extinguishers (ED 1 AMD 4 Amendment 4@ 6/27/95; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2 – 707 5556@ email: nso@nso.na

AIA/NAS - Aerospace Industries Association of America Inc., 95 of the standard deviation

NAS333-340-2013 SCREW@ SHEAR@ 100° STANDARD FLUSH HEAD@ CLOSE TOLERANCE@ 95 KSI Fsu (Rev 16; FREARSON RECESS INACTIVE FOR NEW DESIGN AFTER 30 MARCH@ 1962)
NAS333-340-2012 SCREW@ SHEAR@ 100° STANDARD FLUSH HEAD@ CLOSE TOLERANCE@ 95 KSI Fsu (Rev 15; FREARSON RECESS INACTIVE FOR NEW DESIGN AFTER 30 MARCH@ 1962)
NAS333-340-2000 Screw@ Shear@ 100 Degree Standard Flush Head@ Close Tolerance@ 95 KSI Fsu (Rev 14; FREARSON RECESS INACTIVE FOR NEW DESIGN AFTER 30 MARCH@ 1962)

RU-GOST R, 95 of the standard deviation

GOST 34038-2016 Glass packaging. Flacons. Standard tolerances from nominal dimensions
GOST 8.381-1980 State system for ensuring the uniformity of measurements. Standards. The ways of expressing the errors
GOST R ISO 9058-2010 Glass containers. Bottles. Standard tolerances of nominal dimensions
GOST ISO 9058-2013 Glass containers. Bottles. Standard tolerances from nominal dimensions
GOST R ISO 17258-2015 Statistical methods. Quantitative methods in process improvement «Six Sigma». Benchmarking

BR-ABNT, 95 of the standard deviation

U.S. Air Force, 95 of the standard deviation

AIR FORCE DI-TMSS-81641-2003 ALLOWANCE STANDARD CODE (ASC) UPDATE PACKAGE

European Committee for Standardization (CEN), 95 of the standard deviation

EN 15904:2010 Glass packaging - Standard tolerances for flaconnage
CWA 15236-2005 Analysis of standardization requirements and standardization gaps for eProcurement in Europe
EN 2240-012:2010 Aerospace series - Lamps, incandescent - Part 012: Lamp, code 95 - Product standard
EN ISO 12818:2015 Glass packaging - Standard tolerances for flaconnage

Society of Automotive Engineers (SAE), 95 of the standard deviation

SAE J1058-1999 Standard Sheet Steel Thickness and Tolerances
SAE AMS2204G-1994 TOLERANCES Aluminum Alloy Standard Structural Shapes
SAE AMS2204E-1983 TOLERANCES Aluminum Alloy Standard Structural Shapes
SAE AMS2204D-1973 TOLERANCES Aluminum Alloy Standard Structural Shapes
SAE AMS2204F-2011 TOLERANCES Aluminum Alloy Standard Structural Shapes
SAE MAM2204A-1994 TOLERANCES, METRIC Aluminum Alloy Standard Structural Shapes
SAE MAM2204-1983 TOLERANCES, METRIC Aluminum Alloy Standard Structural Shapes
SAE MAM2204B-1994 TOLERANCES, METRIC Aluminum Alloy Standard Structural Shapes
SAE AS4833-1995 Aircraft New Tire Standard - Bias and Radial

PL-PKN, 95 of the standard deviation

PN M02155-1989 Round screw threads Tolerances for gauges
PN M02141-1986 Height and deph limit gauges Tolerances
PN M02158-1990 Trapezoidal multi - start screw threads Tolerances for gauges

SAE - SAE International, 95 of the standard deviation

SAE J1058-1991 Sheet Steel Thickness and Profile@ Recommended Practice
SAE J1058-1976 Sheet Steel Thickness and Profile
SAE J1058-2015 Sheet Steel Thickness and Profile
SAE AMS2204H-1996 Tolerances Aluminum Alloy Standard Structural Shapes
SAE AMS2204G-1989 Tolerances Aluminum Alloy Standard Structural Shapes
SAE MAM2204B-1989 Tolerances@ Metric Aluminum Alloy Standard Structural Shapes
SAE MAM2204C-1996 Tolerances@ Metric Aluminum Alloy Standard Structural Shapes
SAE AMS2204B-1964 TOLERANCES Aluminum Rolled or Extruded Standard Structural Shapes

North Atlantic Treaty Organization Military Agency for Standardization (NATO-MAS), 95 of the standard deviation

STANAG 4585-2021 COMMON STANDARDS FOR LOW FREQUENCY ACTIVE SONAR AND MULTISTATIC OPERATIONS - ANEP-95 EDITION A

VN-TCVN, 95 of the standard deviation

TCVN 2245-1999 ISO system of limits and fits.Tables of standard tolerance grades and limit deviations for holes and shafts
TCVN 2263-2-2007 General tolerances.Part2:Geometrical tolerances for features without individual tolerance indications
TCVN 7294-2-2003 General tolerances.Part 2: Geometrical tolerances for features without individual tolerance indications

ES-AENOR, 95 of the standard deviation

UNE 25 016

KR-KS, 95 of the standard deviation

KS K 0046-2017(2022) Standard tolerances for yarns spun on the cotton or worsted systems
KS B ISO 286-2-2020 Geometrical product specifications(GPS) — ISO code system for tolerances on linear sizes — Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts

SE-SIS, 95 of the standard deviation

SIS SMS 1486-1950
SIS SMS 715-1968
SIS SMS 1357-1950
SIS SMS 1488-1950
SIS SS 2090-1990 ISO system of limits and fits — Standard tolerances
SIS SMS 1338-1950

CU-NC, 95 of the standard deviation

NC 16-13-1984 Basic Interchangeability Standards. Bevel and Hypoíd Gear Transmissions. Tolerances
NC 01-05-1967 Deviation of dimensions without tolerance indication.

IX-EU/EC, 95 of the standard deviation

EU/EC M 289 Mandate addressed to CEN, CENELEC and ETSI in the field of Information Society Standardization [Refer To: EU 95/46/EC]
EU/EC M 290 Standardization mandate addressed to CEN, CENELEC and ETSI in the field of Information Society Standardization [Refer To: EU 95/46/EC]
EEC/2092/91-1991 Council Regulation on Organic Production of Agricultural Products and Indications Referring Thereto on Agricultural Products and Foodstuffs ((Amended by COM(2002) 561 FINAL, COM(2003) 14 FINAL, and EC 1201/95, EC 1202/95, and EC 1935/95))
89/398/EEC-1989 Council Directive on the Approximation of the Laws of the Member States Relating to Foodstuffs Intended for Particular Nutritional Uses (for Related Standard See TEST 89/398)

Professional Standard - Light Industry, 95 of the standard deviation

QB/T 2267-1996 Tolerance and fit dimensions for timing instruments to 18mm insert standard tolerance values for intermediate tolerance classes

Standard Association of Australia （SAA）, 95 of the standard deviation

AS 1654.2:1995 ISO system of limits and fits - Tables of standard tolerance grades and limit deviations for holes and shafts

CZ-CSN, 95 of the standard deviation

CSN 33 0128-1984 Standard frequencies in tho range of 0,1 to 10000 Hz and their tolerances .
CSN 34 0033-1966 Standard frequencies in the range of 0,1 to 10 000 Hz and their tolerances
CSN 01 4203 Za-1990
CSN ISO 2768-2:1994 General tolerances - Part 2: Geometrical tolerances for features without individual tolerance indications
CSN 42 6710-1978 Cold-drawn seamless tubes with normal tolerances of steel grade 11-16. Dimensions
CSN 01 4240 Zb-1982

The Aluminum Association, 95 of the standard deviation

AA H35.2-2013 American National Standard Dimensional Tolerances for Aluminum Mill Products

Institute of Electrical and Electronics Engineers (IEEE), 95 of the standard deviation

SMPTE ST 2066:2012 ST 2066:2012 - SMPTE Standard - Disparity Map Representation for Stereoscopic 3D

AT-ON, 95 of the standard deviation

ONORM ISO 2768 Teil.2:1990 General tolerances; geometrical tolerances for features without individual tolerance indications
ONORM ISO 286 Teil.2:1990 ISO System oflimits andfits; tables of Standard tolerance grades and limit deviations for holes and shafts

Professional Standard - Electron, 95 of the standard deviation

SJ/T 9507-1993 Grading standard of quality for television transposer

国家市场监督管理总局、中国国家标准化管理委员会, 95 of the standard deviation

GB/T 37851-2019 Glass containers—Standard tolerances for flaconnage

Professional Standard - Machinery, 95 of the standard deviation

JB/T 8995.1-1999 Tolerances and fits for large-size of large electrical machines and hydraulic turbines.General standard tolerances and fundamental deviations

ISUZU - Isuzu Motors Ltd., 95 of the standard deviation

ISC-A140-1992 Standard Dimensions and Tolerances of Steel Materials (Japanese/English Version)

Group Standards of the People's Republic of China, 95 of the standard deviation

T/SCQA 211-2021 Standard for urban road level difference planning and design

Professional Standard - Military and Civilian Products, 95 of the standard deviation

WJ 1266-1981 Dimensional tolerance of plastic parts (limited standard)

European Association of Aerospace Industries, 95 of the standard deviation

AECMA PREN 2240-012-1996 Aerospace Series Lamps, Incandescent Part 012 : Lamp, Code 95 Product Standard Edition P 1

Aerospace, Security and Defence Industries Association of Europe (ASD), 95 of the standard deviation

ASD-STAN PREN 2240-012-1996 Aerospace Series Lamps, Incandescent Part 012 : Lamp, Code 95 Product Standard (Edition P 1)
ASD-STAN PREN 4434-2003 Aerospace Series Copper or Copper Alloy Lightweight Conductors for Electrical Cables Product Standard (Normal and tight tolerances) (Edition P 2)

National Metrological Verification Regulations of the People's Republic of China, 95 of the standard deviation

JJG(铁道) 162-1996 The Rules of Error for Specifical Measuring Standards of Railway

International Telecommunication Union (ITU), 95 of the standard deviation

ITU-T L SUPP 14-2015 ITU-T L.1500 - Standardization gap analysis for smart water management
ITU-T RESOLUCION 44 SPANISH-2008 Bridging the standardization gap between developing and developed countries

Canadian General Standards Board （CGSB), 95 of the standard deviation

CGSB 171.100-2009-CAN/CGSB-2009 North American Profile of ISO 19115:2003 ?Geographic Information ?Metadata (NAP ?Metadata) [Superseded By: CGSB 171.3-95-CAN/CGSB]

NO-SN, 95 of the standard deviation

NS 1428-1982 Technical drawings - Geometrical tolerancing - Datums and datum-systems for geometrical tolerances

TH-TISI, 95 of the standard deviation

TIS 377-1981 Standard for tolerances for bolts, screws, nuts and studs

IT-UNI, 95 of the standard deviation

UNI 6777-1971

European Telecommunications Standards Institute (ETSI), 95 of the standard deviation

ETSI TS 103 901-2015 PowerLine Telecommunications (PLT); Coexistence of Narrow Band PLT technologies operating in the frequency bands 3kHz to 95 kHz, 95 kHz to 125 kHz and 125 kHz to 140 kHz; [IEEE Std 1901.2TM - 2013, IEEE Standard for Low-Frequency (less than 500 kHz) Narro

ETSI - European Telecommunications Standards Institute, 95 of the standard deviation

TS 103 901-2015 PowerLine Telecommunications (PLT); Coexistence of Narrow Band PLT technologies operating in the frequency bands 3kHz to 95 kHz@ 95 kHz to 125 kHz and 125 kHz to 140 kHz; [IEEE Std 1901.2TM - 2013@ IEEE Standard for Low-Frequency (less than 500 kHz) Narro

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, 95 of the standard deviation

PREN 2240-012-1996 Aerospace Series Lamps@ Incandescent Part 012 : Lamp@ Code 95 Product Standard (Edition P 1)

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., 95 of the standard deviation

ASHRAE 4604-2003 Development of Pressurization Airflow Design Criteria for Spaces Under Required Pressure Differentials

ZA-SANS, 95 of the standard deviation

SANS 286-2:1988 ISO system of limits and fits Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts

未注明发布机构, 95 of the standard deviation

BS EN 20286-2:1993(2002) ISO system of limits and fits — Part 2 : Tables of standard tolerance grades and limit deviations for holes and shafts

TZ-TBS, 95 of the standard deviation

TZS 199-1984 Tanzania Standard Leather — Determination of pH value and difference figure of an agueous extract

Underwriters Laboratories (UL), 95 of the standard deviation

UL 61010C-1 (ND)-2002 National Differences For UL 61010C-1 Standard for Process Control Equipment (First Edition)