ZH

RU

ES

Atmospheric particle meter

Atmospheric particle meter, Total:500 items.

In the international standard classification, Atmospheric particle meter involves: Geology. Meteorology. Hydrology, Air quality, Particle size analysis. Sieving, Occupational safety. Industrial hygiene, Plastics, Vocabularies, Test conditions and procedures in general, Floor treatment appliances, Protective equipment, Fuels, Farming and forestry, Environmental protection, Products of the chemical industry, Miscellaneous domestic and commercial equipment, Natural gas, Lubricants, industrial oils and related products, Tobacco, tobacco products and related equipment, Textile machinery, Ventilators. Fans. Air-conditioners, Analytical chemistry, Mining and quarrying, Wastes, Domestic electrical appliances in general, Welding, brazing and soldering, Installations in buildings, Internal combustion engines, Water quality, Inorganic chemicals, Wood technology processes, Power stations in general, Continuous handling equipment, Construction industry, Conducting materials, Medical equipment, Animal feeding stuffs, Electricity. Magnetism. Electrical and magnetic measurements, Small craft, Road vehicle systems.


Professional Standard - Meteorology, Atmospheric particle meter

  • QX/T 271-2015 Interval of maintenance and intercomparison for Aethalometer based on optical attenuation method
  • QX/T 72-2007 Determination of number size distribution of submicron particle by using Electrical Mobility Method

Henan Provincial Standard of the People's Republic of China, Atmospheric particle meter

  • DB41/T 1431-2017 Particle Meter
  • DB41/T 1327-2016 Technical specifications for the construction of fixed pollution source particulate matter and flue gas (SO2, NOx) automatic monitoring base stations
  • DB41/T 1327-2019 Technical specifications for the construction of fixed pollution source particulate matter and flue gas (SO2, NOX) automatic monitoring base stations
  • DB41/T 1344-2019 Technical specifications for operation and maintenance of fixed pollution source particulate matter and flue gas (SO2, NOX) automatic monitoring base station
  • DB41/T 1344-2016 Technical specifications for operation and maintenance of fixed pollution source particulate matter and flue gas (CO₂, NOx) automatic monitoring base station

Heilongjiang Provincial Standard of the People's Republic of China, Atmospheric particle meter

  • DB23/T 2011-2017 Guidelines for Source Apportionment and Monitoring of Atmospheric Particulate Matter
  • DB23/T 2482-2019 Laser Scattering Method for Determination of Exhaust Gas Particles from Stationary Pollution Sources

Association Francaise de Normalisation, Atmospheric particle meter

  • NF X43-276*NF EN 481:1993 Workplace atmospheres. Size fraction definitions for measurement of airborne particles.
  • NF X43-003:1966 Atmospheric pollution. Method of weight determination of solid particles entrained by combustion gases.
  • NF X43-905:2016 Biomonitoring of air - Passive biomonitoring of atmospheric mineral contaminants in particulate deposits on conifer needles
  • NF X43-040*NF ISO 10473:2000 Ambient air - Measurement of the mass of particulate matter on a filter medium - Beta-ray absorption method
  • XP X43-174*XP CEN/TS 17434:2020 Ambient air - Determination of the particle size spectra of atmospheric aerosol using a Mobility Particle Size Spectrometer (MPSS)
  • NF X43-404-34*NF ISO 16000-34:2019 Indoor air - Part 34 : strategies for the measurement of airborne particles
  • XP CEN/TS 17434:2020 Air ambiant - Détermination de la distribution granulométrique de particules d'un aérosol atmosphérique à l'aide d'un spectromètre de granulométrie à mobilité électrique (MPSS)
  • NF ISO 8573-4:2019 Air comprimé - Mesurage des polluants - Partie 4 : teneur en particules
  • NF EN 1827/IN1:2009 Appareils de protection respiratoire - Demi-masques sans soupape inspiratoire et avec filtres démontables, contre les gaz, contre les gaz et les particules, ou contre les particules uniquement - Exigences, essais, marquage
  • NF EN 1827+A1:2009 Appareils de protection respiratoire - Demi-masques sans soupape inspiratoire et avec filtres démontables, contre les gaz, contre les gaz et les particules, ou contre les particules uniquement - Exigences, essais, marquage
  • NF ISO 10315:2022 Cigarettes - Dosage de la nicotine dans la matière particulaire totale du courant principal de fumée - Méthode par chromatographie en phase gazeuse
  • NF X43-026:1990 Air quality. Ambient air. Determination of lead in airborne particulate. Atomic absorption spectrometry.
  • NF V37-026*NF ISO 10315:2022 Cigarettes - Determination of nicotine in total particulate matter from the mainstream smoke - Gas-chromatographic method
  • NF ISO 10362-1:2020 Cigarettes - Dosage de l'eau dans la matière particulaire totale du courant principal de fumée - Partie 1 : méthode par chromatographie en phase gazeuse
  • FD X43-221*FD ISO/TR 27628:2007 Workplace atmospheres - Ultrafine, nanoparticle and nano-structured aerosols - Inhalation exposure characterization and assessment
  • NF EN ISO 13138:2012 Qualité de l'air - Conventions de prélèvement de particules aéroportées en fonction de leur dépôt dans les voies respiratoires humaines
  • NF EN 14530:2004 Air des lieux de travail - Dosage des matières particulaires émises par les moteurs diesel - Exigences générales
  • NF EN 16450:2017 Air ambiant - Systèmes automatisés de mesurage de la concentration de matière particulaire (PM10;PM2,5)
  • FD ISO 8518:2002 Air des lieux de travail - Dosage du plomb particulaire et des composés particulaires du plomb - Méthode par spectrométrie d'absorption atomique dans la flamme ou méthode par spectrométrie d'absorption avec atomisation électrothermique
  • NF X43-267:2004 Workplace atmosphere - Measurement of chemical agents present as mixtures of airborne particles and vapour - Requirements and test methods.
  • NF X43-021*NF EN 16450:2017 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10;PM2,5)
  • NF V37-011-1*NF ISO 10362-1:2020 Cigarettes - Determination of water in total particulate matter from the mainstream smoke - Part 1 : gas-chromatographic method
  • NF ISO 10473:2000 Air ambiant - Mesurage de la masse des matières particulaires sur un milieu filtrant - Méthode par absorption de rayons bêta
  • NF X43-133*NF EN ISO 28439:2011 Workplace atmospheres - Characterization of ultrafine aerosols/nanoaerosols - Determination of the size distribution and number concentration using differential mobility analysing systems.
  • NF EN 13205-4:2014 Exposition sur les lieux de travail - Évaluation des performances des dispositifs de prélèvement pour le mesurage des concentrations de particules en suspension dans l'air - Partie 4 : essai de performances en laboratoire par comparaison des concen...
  • NF EN ISO 14644-1:2016 Salles propres et environnements maîtrisés apparentés - Partie 1 : classification de la propreté particulaire de l'air
  • NF ISO 22253:2019 Cigarettes - Dosage de la nicotine dans la matière particulaire totale provenant du courant principal de fumée avec un régime de fumage intense - Méthode par chromatographie en phase gazeuse
  • XP X43-458*XP CEN/TS 17458:2021 Ambient air - Methodology to assess the performance of receptor oriented source apportionment modelling applications for particulate matter
  • NF E37-211-2:1996 Reciprocating internal combustion engines. Exhaust emission measurement. Part 2 : measurement of gaseous and particulate exhaust emissions at site.
  • NF EN ISO 18854:2015 Petits navires - Moteurs alternatifs à combustion interne mesurage des émissions de gaz d'échappement - Mesurage des émissions de gaz et de particules au banc
  • NF X43-049*NF EN 12341:2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
  • FD CEN/TR 16013-3:2012 Exposition au poste de travail - Guide d'utilisation des instruments à lecture directe pour la surveillance des aérosols - Partie 3 : évaluation des concentrations de particules en suspension dans l'air à l'aide de photomètres
  • NF E37-211-1:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1 : test-bed measurement of gaseous and particulate exhaust emissions.
  • NF E37-211-1:1997 Reciprocating internal combustion engines. Exhaust emission measurement. Part 1 : test-bed measurement of gaseous and particulate exhaust emissions.
  • FD X43-711-3*FD CEN/TR 16013-3:2012 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3 : evaluation of airborne particle concentrations using photometers
  • NF EN 14902:2005 Qualité de l'air ambiant - Méthode normalisée pour la mesure du plomb, cadmium, de l'arsenic et du nickel dans la fraction MP10 de la matière particulaire en suspension
  • NF E37-211-1*NF ISO 8178-1:2020 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1 : test-bed measurement systems of gaseous and particulate emissions
  • NF S95-189-2*NF EN ISO 18562-2:2020 Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 2 : tests for emissions of particulate matter
  • NF EN ISO 18562-2:2020 Évaluation de la biocompatibilité des voies de gaz respiratoires dans les applications de soins de santé - Partie 2 : essais concernant les émissions de matières particulaires

Japanese Industrial Standards Committee (JISC), Atmospheric particle meter

  • JIS B 7954:2001 Automatic monitors for suspended particulate matter in ambient air
  • JIS B 7954:1988 Automatic moniters for suspended particulate matter in ambient air
  • JIS T 8157:2018 Powered air purifying respirator for particulate matter
  • JIS Z 8813:1994 Measuring methods for suspended particulate matter concentration in air-general requirements
  • JIS B 7953:2004 Continuous analyzers for oxides of nitrogen in ambient air
  • JIS B 7953:1997 Continuous analysers for oxides of nitrogen in ambient air

API - American Petroleum Institute, Atmospheric particle meter

  • API PUBL 4076-1971 EMISSIONS@ CONCENTRATIONS@ AND FATE OF PARTICULATE ATMOSPHERIC POLLUTANTS
  • API 922-1961 REMOVAL OF PARTICULATE MATTER FROM GASEOUS WASTES FILTRATION
  • API 26-60070- AIR QUALITY MONOGRAPHS Monograph #75-23 Gaseous and Particulate Sulfur Compounds in Urban Atmospheres
  • API 4348-1982 ELEMENTS OF AIRBORNE PARTICLE BEHAVIOR IN THE UNITED STATES
  • API PUBL 931 C13-1974 MANUAL ON DISPOSAL OF REFINERY WASTES VOLUME ON ATMOSPHERIC EMISSIONS - CHAPTER 13-FILTERS AND WET COLLECTORS FOR THE REMOVAL OF PARTICULATE MATTER
  • API 26-60057-1969 AIR QUALITY MONOGRAPHS Monograph #69-1 Ambient Air quality Standards for Particulates-Review and Evaluation

Korean Agency for Technology and Standards (KATS), Atmospheric particle meter

  • KS B 3278-1992
  • KS H ISO 15593:2009 Environmental tobacco smoke-Estimation of its contribution to respirable suspended particles-Determination of particulate matter by ultraviolet absorbance and by fluorescence
  • KS I ISO 21438-3-2012(2017) Workplace atmospheres-Determination of inorganic acids by ion chromatography-Part 3:Hydrofluoric acid and particulate fluorides
  • KS I ISO 27628:2021 Workplace atmospheres — Ultrafine, nanoparticle and nano-structured aerosols — Inhalation exposure characterization and assessment
  • KS B 5360-1990 Continuous Analysers for Oxides of Nitrogen in Ambient Air
  • KS B 5360-2001 Continuous Analysers for Oxides of Nitrogen in Ambient Air
  • KS H ISO 10362-1:2020 Cigarettes — Determination of water in total particulate matter from the mainstream smoke — Part 1: Gas-chromatographic method
  • KS I ISO 10473:2010 Ambient air-Measurement of the mass of particulate matter on a filter medium-Beta-ray absorption method
  • KS H ISO 18144:2009 Environmental tobacco smoke-Estimation of its contribution to respirable suspended particles-Method based on solanesol
  • KS B 5357-1981 Continuous analyzers for hydrocarbons in ambient air
  • KS I ISO 10473:2020 Ambient air — Measurement of the mass of particulate matter on a filter medium — Beta-ray absorption method
  • KS I 30011-2012 Workplace air-Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry
  • KS I ISO 8518:2006 Workplace air-Determination of particulate lead and lead compounds(Flame electrothermal atomic absorption spectrometric method)
  • KS R ISO 8178-1:2007 Reciprocating internal combustion engines-Exhaust emission measurement-Part 1 : Test-bed measurement of gaseous and particulate exhaust emissions
  • KS I ISO 12884:2008 Ambient air-Determination of total (gas and particle-phase) polycyclic aromatic hydrocarbons-Collection on sorbent-backed filters with gas chromatographic/mass spectrometric analyses
  • KS I ISO 30011-2012(2017) Workplace air-Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry
  • KS I ISO 16740-2007(2017) Workplace air-Determination of hexavalent chromium in airborne particulate matter-Method by ion chromatography and spectrophotometric measurement using diphenyl carbazide
  • KS I 2209-2008 Form, size and performance testing methods of filtration media for collecting airborne particulate matters
  • KS I ISO 11174:2019 Workplace air ― Determination of particulate cadmium and cadmium compounds ― Flame and electrothermal atomic absorption spectrometric method
  • KS I ISO 8518-2006(2017) Workplace air-Determination of particulate lead and lead compounds(Flame electrothermal atomic absorption spectrometric method)
  • KS I ISO 11041:2019 Workplace air ― Determination of particulate arsenic and arsenic compounds and arsenic trioxide vapour ― Method by hydride generation and atomic absorption spectrometry

Association of German Mechanical Engineers, Atmospheric particle meter

  • VDI 3867 Blatt 4-2011 Measurement of particles in ambient air - Determination of the particle number concentration and particle size distribution of aerosols - Optical aerosol spectrometer
  • VDI 3867 Blatt 5-2013 Measurement of particles in ambient air - Determination of the particle number concentration and particle size distribution of aerosols - Time-of-flight spectrometer
  • VDI 3867 Blatt 3-2012 Measurement of particles in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Electrical mobility spectrometer
  • VDI 2463 Blatt 4-1976 Particulate matter measurement; Measurement of particulate matter in ambient air; LIB-filter method
  • VDI 3491 Blatt 1-1980 Particulate matter measurement; characteristics of suspended particulate matter in gases; terms and definitions
  • VDI 2463 Blatt 1-1999 Particulate matter measurement - Gravimetric determination of mass concentration of suspended particulate matter in ambient air - General principles
  • VDI 2260-2003 Technical warranty for gas cleaning equipment - Particulate and gaseous matter
  • VDI 3489 Blatt 8-1996 Particulate matter measurement - Methods for characterizing and monitoring test aerosols - Time-of-flight spectrometer
  • VDI 2463 Blatt 7-2014 Particulate matter measurement - Determination of suspended particulate matter and gaseous chemical compounds in ambient air and indoor air - Active sampling via low-volume sampler (LVS)
  • VDI 3867 Blatt 6-2012 Measurement of particles in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Electrical Low Pressure Impactor (ELPI)
  • VDI 3786 Blatt 10-1994 Environmental meteorology; measurement of the atmospheric turbidity due to aerosol particles with sunphotometers
  • VDI 3867 Blatt 2-2008 Measurement of particulate matter in ambient air - Methods for characterizing test aerosols - Determination of the particle number concentration and particle size distribution - Condensation Particle Counter (CPC)
  • VDI 3867 Blatt 1-2009 Measurement of particulate matter in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Fundamentals
  • VDI 2463 Blatt 8-2014 Particulate matter measurement - Determination of suspended particulate matter in ambient air and indoor air - Non-fractioning sampling system for low-volume samplers (LVS)
  • VDI 3491 Blatt 7-1987 Particulate matter measurement; generation of test aerosols; Rapaport-Weinstock generator
  • VDI 3491 Blatt 16-1996 Particulate matter measurement - Generation of carbon aerosols using a spark aerosol generator
  • VDI 3491 Blatt 6-1980 Particulate matter measurement; generation of test aerosols; platinum oxide generator
  • VDI 3489 Blatt 3-1997 Particulate matter measurement - Methods of characterizing and monitoring test aerosols - Optical particle counter
  • VDI 3491 Blatt 3-1980 Particulate matter measurement; generation of latex aerosols using nozzle atomizers
  • VDI 3491 Blatt 12-1990 Particulate matter measurement; generation of test aerosols using centrifugal atomizers
  • VDI 3491 Blatt 13-1996 Particulate matter measurement - Generation of test aerosols using a vibrating-orifice generator
  • VDI 3491 Blatt 11-1990 Particulate matter measurement; generation of test aerosols using ultrasonic atomizers
  • VDI 3491 Blatt 4-1980 Particulate matter measurement; generation of test aerosols; Sinclair-La Mer-generator
  • VDI 3491 Blatt 2-1980 Particulate matter measurement; production methods of test aerosols; foundations and synoptics
  • VDI 3491 Blatt 9-1989 Particulate matter measurement; generation of test aerosols with a rotating brush generator
  • VDI 2066 Blatt 5-1994 Particulate matter measurement - Dust measurement in flowing gases; particle size selective measurement by impaction method - Cascade impactor
  • VDI 4300 Blatt 11-2013 Measurement of indoor air pollution - Measurement strategies for determination of airborne particles in indoor environment - PM2,5-fraction
  • VDI 2267 Blatt 2-1983 Determination of suspended particulates in ambient air; measurement of lead by X-ray fluorescence
  • VDI 3491 Blatt 5-1980 Particulate matter measurement; generation of test aerosols by nebulization of dye-solutions with nozzle atomizers
  • VDI 3491 Blatt 8-1989 Particulate matter measurement; generation of test aerosols from powders using a belt feed unit
  • VDI 2264-2001 Commissioning, operation and maintenance of separator systems for the removal of gaseous and particulate substances from gas streams
  • VDI 3491 Blatt 10-1990 Particulate matter measurement; generation of test aerosols from fibrous powders using a vibrating bed aerosol generator
  • VDI 2066 Blatt 1-2006 Particulate matter measurement - Dust measurement in flowing gases - Gravimetric determination of dust load
  • VDI 3491 Blatt 15-1996 Particulate matter measurement - Generation of test aerosols - Dilution systems with continuous volumetric flow

KR-KS, Atmospheric particle meter

  • KS B 5645-2018(2023) Automatic moniters for suspended particulate matter in ambient air
  • KS I ISO 21438-3-2022 Workplace atmospheres Determination of inorganic acids by ion chromatography Part 3: Hydrofluoric acid and particulate fluorides
  • KS I ISO 16740-2022 Workplace air Determination of hexavalent chromium in airborne particulate matter Method by ion chromatography and spectrophotometric measurement using diphenyl carbazide
  • KS I ISO 27628-2021 Workplace atmospheres — Ultrafine, nanoparticle and nano-structured aerosols — Inhalation exposure characterization and assessment
  • KS H ISO 10362-1-2020 Cigarettes — Determination of water in total particulate matter from the mainstream smoke — Part 1: Gas-chromatographic method
  • KS I ISO 10473-2020 Ambient air — Measurement of the mass of particulate matter on a filter medium — Beta-ray absorption method
  • KS H ISO 10315-2022 Cigarettes — Determination of nicotine in total particulate matter from the mainstream smoke — Gas-chromatographic method
  • KS I ISO 11174-2019 Workplace air ― Determination of particulate cadmium and cadmium compounds ― Flame and electrothermal atomic absorption spectrometric method
  • KS I ISO 30011-2022 Workplace air Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry
  • KS I ISO 11041-2019 Workplace air ― Determination of particulate arsenic and arsenic compounds and arsenic trioxide vapour ― Method by hydride generation and atomic absorption spectrometry

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Atmospheric particle meter

  • GB 11667-1989 Hygienic standard for inhalable particles in ambient air of residential areas
  • GB/T 38517-2020 Particulate—Bioaerosols sampling and analysis—General principles
  • GB/T 27893-2011 Natural gas.Determination of particles content.Gravimetric method
  • GB/T 38517-2020(英文版) Particulate—Bioaerosols sampling and analysis—General principles
  • GB/T 15432-1995 Ambient Air--Determination of total suspended particulates--Gravimetric method
  • GB/T 16157-1996 The determination of particulates and sampling methods of gaseous pollutants emitted from exhaust gas of stationary source
  • GB/T 21133-2007 Environmental tobacco smoke.Estimation of its contribution to respirable suspended particles.Method based on solanesol
  • GB/T 21131-2007 Environmental tobacco smoke.Estimation of its contribuion to respirable suspended particles.Determination of particulate matter by ultraviolet absorbance and by fluorescence
  • GB/T 8190.2-2011 Reciprocating internal combustion engines.Exhaust emission measurement.Part 2: Measurement of gaseous and particulate exhaust emissions at site
  • GB/T 8190.2-1999 Reciprocating internal combustion engines Exhaust emission measurement--Part 2: Measurement of gaseous and particulate exhaust emissions at site

Shandong Provincial Standard of the People's Republic of China, Atmospheric particle meter

  • DB37/ 1996-2011 Integrated Emission Standards for Air Particulate Matter from Stationary Sources in Shandong Province
  • DB37/T 4378-2021 Portable beta-ray method for the determination of particulate matter in ambient air
  • DB37/T 3785-2019 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method
  • DB37/T 2537-2014 Gravimetric method for determination of low-concentration particulate matter in exhaust gas from stationary pollution sources in Shandong Province

TH-TISI, Atmospheric particle meter

  • TIS 2574-2012 Airborne particulate matter sampling and analysis in workplace environment

Danish Standards Foundation, Atmospheric particle meter

  • DS/EN 14530:2004 Workplace atmospheres - Determination of diesel particulate matter - General requirements
  • DS/EN ISO 13982-2:2005 Protective clothing for use against solid particulates - Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits
  • DS/CEN/TS 15439:2007 Biomass gasification - Tar and particles in product gases - Sampling and analysis
  • DS/EN 13205:2002 Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations
  • DS/ISO 10315:2021 Cigarettes – Determination of nicotine in total particulate matter from the mainstream smoke – Gas-chromatographic method
  • DS/EN ISO 13982-1/A1:2010 Protective clothing for use against solid particulates - Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing)
  • DS/EN ISO 13982-1:2005 Protective clothing for use against solid particulates - Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing)
  • DS/CEN/TS 16450:2013 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)
  • DS/EN 61788-9:2005 Superconductivity - Part 9: Measurements for bulk high temperature superconductors - Trapped flux density of large grain oxide superconductors
  • DS/CEN/TS 17458:2021 Ambient air – Methodology to assess the performance of receptor oriented source apportionment modelling applications for particulate matter
  • DS/EN 14902/AC:2007 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
  • DS/EN 14902:2005 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
  • DS/EN 14907:2005 Ambient air quality - Reference gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
  • DS/EN ISO 29462:2013 Field testing of general ventilation filtration devices and systems for in situ removal efficiency by particle size and resistance to airflow

Lithuanian Standards Office , Atmospheric particle meter

  • LST EN 14530-2004 Workplace atmospheres - Determination of diesel particulate matter - General requirements
  • LST EN 481-2001 Workplace atmospheres - Size fraction definitions for measurement of airborne particles
  • LST EN 13205-2002 Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations
  • LST EN ISO 13982-2:2005 Protective clothing for use against solid particulates - Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits (ISO 13982-2:2004)
  • LST EN ISO 13982-1:2005 Protective clothing for use against solid particulates - Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) (ISO 13982-1:2004)
  • LST ISO 10473:2001 Ambient air. Measurement of the mass of particulate matter on a filter medium. Beta-ray absorption method
  • LST EN 14907-2005 Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
  • LST EN 61788-9-2005 Superconductivity. Part 9: Measurements for bulk high temperature superconductors. Trapped flux density of large grain oxide superconductors (IEC 61788-9:2005)
  • LST CEN/TS 17458-2021 Ambient air - Methodology to assess the performance of receptor oriented source apportionment modelling applications for particulate matter
  • LST EN 14902-2005 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
  • LST EN 14902-2005/AC-2007 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
  • LST EN 12341-2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
  • LST EN ISO 13982-1:2005/A1:2011 Protective clothing for use against solid particulates - Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) - Amendment 1 (ISO 13982-1:2004/Amd.1:20

ES-UNE, Atmospheric particle meter

  • UNE-EN 14530:2004 Workplace atmospheres - Determination of diesel particulate matter - General requirements
  • UNE-CEN/TS 16976:2016 Ambient air - Determination of the particle number concentration of atmospheric aerosol (Endorsed by Asociación Española de Normalización in January of 2021.)
  • UNE-CEN/TS 17434:2020 Ambient air - Determination of the particle number size distribution of atmospheric aerosol using a Mobility Particle Size Spectrometer (MPSS) (Endorsed by Asociación Española de Normalización in May of 2020.)
  • UNE-CEN/TS 17458:2020 Ambient air - Methodology to assess the performance of receptor oriented source apportionment modelling applications for particulate matter (Endorsed by Asociación Española de Normalización in February of 2021.)
  • UNE-EN 14902:2006/AC:2006 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
  • UNE-EN ISO 18562-2:2020 Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 2: Tests for emissions of particulate matter (ISO 18562-2:2017) (Endorsed by Asociación Española de Normalización in April of 2020.)

RO-ASRO, Atmospheric particle meter

German Institute for Standardization, Atmospheric particle meter

  • DIN EN 14530:2004-06 Workplace atmospheres - Determination of diesel particulate matter - General requirements; German version EN 14530:2004
  • DIN EN 13205:2002 Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations; German version EN 13205:2001
  • DIN EN 16450:2017-07 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5); German version EN 16450:2017
  • DIN ISO 16000-34 Berichtigung 1:2019-05 Indoor air - Part 34: Strategies for the measurement of airborne particles (ISO 16000-34:2018); Corrigendum 1
  • DIN ISO 16000-34:2019-01 Indoor air - Part 34: Strategies for the measurement of airborne particles (ISO 16000-34:2018)
  • DIN CEN/TS 17434:2020-06 Ambient air - Determination of the particle number size distribution of atmospheric aerosol using a Mobility Particle Size Spectrometer (MPSS); German version CEN/TS 17434:2020
  • DIN 51813:1989 Determination of solid matter content of lubricating greases (particle sizes above 25 m)
  • DIN ISO 10473:2002 Ambient air - Measurement of the mass of particulate matter on a filter medium - Beta-ray absorption method (ISO 10473:2000)
  • DIN CEN/TS 15439:2006-08 Biomass gasification - Tar and particles in product gases - Sampling and analysis; German version CEN/TS 15439:2006
  • DIN 51938:1994 Testing of carbon materials; determination of particle size distribution by sieving; solid matters
  • DIN 51938:2015 Testing of carbonaceous materials - Determination of particle size distribution by sieving - Solid matters
  • DIN EN 14530:2004 Workplace atmospheres - Determination of diesel particulate matter - General requirements; German version EN 14530:2004
  • DIN ISO 16000-34:2019 Indoor air - Part 34: Strategies for the measurement of airborne particles (ISO 16000-34:2018)
  • DIN EN ISO 13982-2:2005-03 Protective clothing for use against solid particulates - Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits (ISO 13982-2:2004); German version EN ISO 13982-2:2004
  • DIN ISO 10362-1:2021-02 Cigarettes - Determination of water in total particular matter from the mainstream smoke - Part 1: Gas-chromatographic method (ISO 10362-1:2019)
  • DIN 33899-2:2014-02 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
  • DIN ISO 10473:2002-08 Ambient air - Measurement of the mass of particulate matter on a filter medium - Beta-ray absorption method (ISO 10473:2000)
  • DIN 33899-2:2014 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
  • DIN EN ISO 13982-1:2011-02 Protective clothing for use against solid particulates - Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) (ISO 13982-1:2004 + Amd. 1:2010); Ger...
  • DIN 71460-1:2006-04 Road vehicles - Air filters for motor passenger compartments - Part 1: Test for particulate filtration
  • DIN ISO 12884:2000 Ambient air - Determination of total (gas and particle phase) polycyclic aromatic hydrocarbons - Collection on sorbent-backed filters with gas chromatographic/mass spectrometric analysis (ISO 12884:2000)
  • DIN CEN/TS 17458:2021-02 Ambient air - Methodology to assess the performance of receptor oriented source apportionment modelling applications for particulate matter; German version CEN/TS 17458:2020
  • DIN 33899-3:2014-09 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3: Evaluation of airborne particle concentrations using photometers
  • DIN 71460-1:2006 Road vehicles - Air filters for motor passenger compartments - Part 1: Test for particulate filtration
  • DIN EN 14902 Berichtigung 1:2007-01 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter; German version EN 14902:2005, Corrigenda to DIN EN 14902:2005-10; German version EN 14902:2005/AC:2006
  • DIN EN 14902:2005-10 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter; German version EN 14902:2005
  • DIN EN ISO 18562-2:2022-12 Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 2: Tests for emissions of particulate matter (ISO/DIS 18562-2:2022); German and English version prEN ISO 18562-2:2022 / Note: Date of issue 2022-11-18*Intended as r...
  • DIN EN ISO 18562-2:2020-05 Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 2: Tests for emissions of particulate matter (ISO 18562-2:2017); German version EN ISO 18562-2:2020 / Note: To be replaced by DIN EN ISO 18562-2 (2022-12).

Group Standards of the People's Republic of China, Atmospheric particle meter

  • T/CSP 7-2020 Particle technology—Technical requirements for ultraviolet-induced influorescence bioaerosol monitoring apparatus
  • T/SAEPI 011-2022 Particle filter for air cleaner
  • T/ACEF 081-2023 Fixedwing general aviation platforms Technical guidance for airbornein-situ measurement of atmospheric particulate matters
  • T/CAEPI 27-2020 Technical requirement for agglomeration equipment of flue gas particles
  • T/SAEPI 003-2019 Commercial Indoor Particles Concentration Detection System
  • T/SDAS 447-2022 Detection method of main parameters of mask particle filtration efficiency detector
  • T/CAQI 35-2017 Graduation for particle purifying performance of fresh air type air cleaner
  • T/CAQI 17-2016 Graduation for particle purifying performance of filter-type air cleaner
  • T/GDBX 009-2019 Non-precious metal catalytic diesel engine exhaust particulate filter
  • T/BSPT 003-2018 Performance test method for fine particulate matter (PM2.5 )mass concentration measurement instruments based on light scattering principle
  • T/AHEMA 22-2022 Technical Code for Cruise Monitoring of Particulate Matter by Light Scattering Method
  • T/XZFW 004-2023 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method
  • T/CIECCPA 048-2023 Test method for condensable particulate matter in flue gas of coal-fired power plant — Impinger method
  • T/CECS 10136-2021 Test method for filtration efficiency of air filter media on spherical particulate matter from 20 nm to 500 nm
  • T/BSPT 003-2020 Powder Technology—Performance test method for fine particulate matter (PM2.5)mass concentration measurement instruments based on light scattering principle
  • T/XZFW 006-2023 Digital processor for monitoring results of low-concentration particulate matter in exhaust gas from fixed pollution sources
  • T/XZFW 010-2023 Stationary source emission —data processor for monitoring of particulate matter at low concentration

NATO - North Atlantic Treaty Organization, Atmospheric particle meter

  • AFLP-3713-2014 DETERMINATION OF PARTICULATE MATTER IN AEROSPACE HYDRAULIC FLUIDS USING A PARTICLE ANALYSER (ED A@ Ver 1; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (
  • STANAG 3713-1990 Determination of Particulate Matter in Aerospace Hydraulic Fluids Using a Particle Size Analyser (ED 3 AMD 1; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +

US-FCR, Atmospheric particle meter

中国气象局, Atmospheric particle meter

  • QX/T 509-2019 GRIMM 180 Particulate Matter Concentration Monitor Calibration Specifications

IN-BIS, Atmospheric particle meter

Professional Standard - Agriculture, Atmospheric particle meter

British Standards Institution (BSI), Atmospheric particle meter

  • BS PD CEN/TS 16976:2016 Ambient air. Determination of the particle number concentration of atmospheric aerosol
  • BS EN ISO 18846:2016 Solid biofuels. Determination of fines content in quantities of pellets
  • BS ISO 16000-34:2018 Indoor air. Strategies for the measurement of airborne particles
  • BS ISO 8573-4:2019 Compressed air. Contaminant measurement - Particle content
  • PD CEN/TS 17434:2020 Ambient air. Determination of the particle number size distribution of atmospheric aerosol using a Mobility Particle Size Spectrometer (MPSS)
  • DD CEN/TS 15439:2006 Biomass gasification. Tar and particles in product gases. Sampling and analysis
  • BS EN 16450:2017 Tracked Changes. Ambient air. Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)
  • BS EN 14530:2004(2009) Workplace atmospheres - Determination of diesel particulate matter - General requirements
  • BS EN 14530:2004 Workplace atmospheres - Determination of diesel particulate matter - General requirements
  • DD ENV 13936-2001 Workplace atmospheres. Measurement of chemical agents present as mixtures of airborne particles and vapour. Requirements and test methods
  • BS ISO 10362-1:2019 Tracked Changes. Cigarettes. Determination of water in total particulate matter from the mainstream smoke. Gas-chromatographic method
  • BS ISO 8178-1:2017 Reciprocating internal combustion engines. Exhaust emission measurement. Test-bed measurement systems of gaseous and particulate emissions
  • BS ISO 8178-1:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions
  • BS PD CEN/TS 17458:2020 Ambient air. Methodology to assess the performance of receptor oriented source apportionment modelling applications for particulate matter
  • BS ISO 18562-2:2017 Biocompatibility evaluation of breathing gas pathways in healthcare applications. Tests for emissions of particulate matter
  • BS EN ISO 18562-2:2020 Biocompatibility evaluation of breathing gas pathways in healthcare applications. Tests for emissions of particulate matter
  • BS ISO 8178-2:2009 Reciprocating internal combustion engines. Exhaust emission measurement. Measurement of gaseous and particulate exhaust emissions under field conditions
  • BS ISO 8178-2:2008 Reciprocating internal combustion engines - Exhaust emission measurement - Measurement of gaseous and particulate exhaust emissions under field conditions
  • BS EN 12341:2014 Ambient air. Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
  • 20/30414922 DC BS ISO 10315. Cigarettes. Determination of nicotine in total particulate matter from the mainstream smoke. Gaschromatographic method
  • BS ISO 10315:2021 Tracked Changes. Cigarettes. Determination of nicotine in total particulate matter from the mainstream smoke. Gas-chromatographic method
  • BS ISO 30011:2010 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Atmospheric particle meter

American Society of Mechanical Engineers (ASME), Atmospheric particle meter

National Metrological Technical Specifications of the People's Republic of China, Atmospheric particle meter

  • JJF 1736-2018 Program of Pattern Evaluation of Total Suspended Particulates Samplers

American Society for Testing and Materials (ASTM), Atmospheric particle meter

  • ASTM D4600-22 Standard Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres
  • ASTM D4096-91(1997)e1 Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High-Volume Sampler Method)
  • ASTM D3268-91(2000)e1 Standard Test Method for Separation and Collection of Particulate and Gaseous Fluorides in the Atmosphere (Sodium Bicarbonate-Coated Glass Tube and Particulate Filter Method)
  • ASTM D3268-91(2018) Standard Test Method for Separation and Collection of Particulate and Gaseous Fluorides in the Atmosphere (Sodium Bicarbonate-Coated Glass Tube and Particulate Filter Method)
  • ASTM D4600-95(2005) Standard Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres
  • ASTM D4600-95(2010) Standard Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres
  • ASTM F50-21 Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles
  • ASTM D4096-17 Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High–Volume Sampler Method)
  • ASTM D4096-17(2017) Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High–Volume Sampler Method)
  • ASTM D6494-22 Standard Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction
  • ASTM D7439-08 Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasmax2013;Mass Spectrometry
  • ASTM D7439-14 Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasmandash;Mass Spectrometry
  • ASTM F25/F25M-21 Standard Test Method for Sizing and Counting Airborne Particulate Contamination in Cleanrooms and Other Dust-Controlled Areas
  • ASTM D3685/D3685M-13(2021) Standard Test Methods for Sampling and Determination of Particulate Matter in Stack Gases
  • ASTM D3266-91(2000)e1 Standard Test Method for Automated Separation and Collection of Particulate and Acidic Gaseous Fluoride in the Atmosphere (Double Paper Tape Sampler Method)
  • ASTM D3267-20 Standard Test Method for Separation and Collection of Particulate and Water-Soluble Gaseous Fluorides in the Atmosphere (Filter and Impinger Method)
  • ASTM D3266-91(2018) Standard Test Method for Automated Separation and Collection of Particulate and Acidic Gaseous Fluoride in the Atmosphere (Double Paper Tape Sampler Method)
  • ASTM D3267-12 Standard Test Method for Separation and Collection of Particulate and Water-Soluble Gaseous Fluorides in the Atmosphere (Filter and Impinger Method)
  • ASTM D1704/D1704M-95e1 Standard Test Method for Determining the Amount of Particulate Matter in the Atmosphere by Measurement of the Light Absorbance of a Filter Sample
  • ASTM F50-12(2015) Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles
  • ASTM D3267-91(2000)e1 Standard Test Method for Separation and Collection of Particulate and Water-Soluble Gaseous Fluorides in the Atmosphere (Filter and Impinger Method)
  • ASTM D3268-91(2005) Standard Test Method for Separation and Collection of Particulate and Gaseous Fluorides in the Atmosphere (Sodium Bicarbonate-Coated Glass Tube and Particulate Filter Method)
  • ASTM D8358-21 Standard Guide for Assessment and Inclusion of Wall Deposits in the Analysis of Single-Stage Samplers for Airborne Particulate Matter
  • ASTM D7650-21 Standard Practice for Sampling of Particulate Matter in High Pressure Gaseous Fuels with an In-Stream Filter
  • ASTM D3268-91(2011) Standard Test Method for Separation and Collection of Particulate and Gaseous Fluorides in the Atmosphere (Sodium Bicarbonate-Coated Glass Tube and Particulate Filter Method)
  • ASTM D7650-13 Standard Test Method for Sampling of Particulate Matter in High Pressure Hydrogen used as a Gaseous Fuel with an In-Stream Filter
  • ASTM F25/F25M-09(2015) Standard Test Method for Sizing and Counting Airborne Particulate Contamination in Cleanrooms and Other Dust-Controlled Areas

BE-NBN, Atmospheric particle meter

  • NBN T 96-101-1978 Gravimetrie determination of the total suspended particulate content in work place atmospheres

HU-MSZT, Atmospheric particle meter

Institute of Environmental Sciences and Technology, Atmospheric particle meter

国家林业局, Atmospheric particle meter

  • LY/T 2669-2016 Technical regulations for monitoring air particulate matter in forests
  • LY/T 2673-2016 Technical regulations for evaluation of the impact of forest vegetation on air particulate matter

North Atlantic Treaty Organization Standards Agency, Atmospheric particle meter

  • STANAG 3713-2008 DETERMINATION OF PARTICULATE MATTER IN AEROSPACE HYDRAULIC FLUIDS USING A PARTICLE SIZE ANALYSER

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Atmospheric particle meter

Professional Standard - Petrochemical Industry, Atmospheric particle meter

国家市场监督管理总局、中国国家标准化管理委员会, Atmospheric particle meter

  • GB/T 39990-2021 Particulate─Bioaerosol sampler─Technical specification
  • GB/T 39193-2020 Ambient air—Determination of particulate matter mass concentration—Gravimetric method
  • GB/T 35099-2018 Microbeam analysis—Scanning electron microscopy with energy dispersive X-ray spectrometry—Morphology and element analysis of single fine particles in ambient air
  • GB/T 38340-2019 Small craft—Reciprocating internal combustion engines exhaust emission measurement—Test-bed measurement of gaseous and particulate exhaust emissions

廊坊市市场监督管理局, Atmospheric particle meter

  • DB1310/T 225-2020 Method for determining the ability of woody plants to absorb airborne particles

中华人民共和国国家卫生和计划生育委员会, Atmospheric particle meter

  • GB/T 17095-1997 Hygienic standard for inhalable particulate matter in indoor air
  • WS/T 206-2001 Method for determination of inhalabnle particulate matter (PM10) in air of public place----Light scattering method

RU-GOST R, Atmospheric particle meter

  • GOST 17.2.4.05-1983 Nature protection. Atmosphere. Gravimetric method for determination of suspended dust particles
  • GOST R 59667-2021 Atmospheric air quality. Methods for determining the fractional composition of dust by optical method. Calculation of suspended particle concentrations PM2.5, PM10 in atmospheric air based on fractional composition
  • GOST R 59668-2021 Emissions of the polluting substances in the atmosphere. Method for calculating the concentrations of suspended particles PM2.5 and PM10 in industrial emissions based on the fractional composition of dust
  • GOST 13496.8-1972 Mixed feeds. Methods for the determination of size of crushed particle and the content of uncrushed seed of cultured and wild plants
  • GOST R EN ISO 13982-1-2009 Occupational safety standards system. Protective clothing for use against solid particulates. Part 1. Performance requirements for chemical protective clothing providing protection to full body against airborne solid particulates (type 5 clothing)
  • GOST R ISO 15202-1-2014 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Part 1. Sampling
  • GOST R ISO 15202-2-2014 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Part 2. Sample preparation
  • GOST ISO 8178-2-2013 Reciprocating internal combustion engines. Exhaust emission measurement. Part 2. Measurement of gaseous and particulate exhaust emissions under field conditions
  • GOST R ISO 30011-2017 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry

Standard Association of Australia (SAA), Atmospheric particle meter

  • AS/NZS 3580.9.11:2008 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM10 beta attenuation monitors
  • AS/NZS 3580.9.12:2022 Methods for sampling and analysis of ambient air, Method 9.12: Determination of suspended particulate matter — PM2.5 beta attenuation monitors
  • AS/NZS 3580.9.11:2022 Methods for sampling and analysis of ambient air, Method 9.11: Determination of suspended particulate matter — PM10 beta attenuation monitors
  • AS 3853.1:2006 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator?s breathing zone - Sampling of airborne particles
  • AS/NZS 3580.9.3:2015 Methods for sampling and analysis of ambient air, Method 9.3: Determination of suspended particulate matter — Total suspended particulate matter (TSP) — High volume sampler gravimetric method
  • AS/NZS 3580.10.2:2013
  • AS/NZS 3580.10.1:2016 Methods for sampling and analysis of ambient air, Method 10.1: Determination of particulate matter — Deposited matter — Gravimetric method
  • AS 2365.7:2006 Methods for sampling and analysis of indoor air - Determination of total suspended particulate matter - Gravimetric method
  • AS/NZS 3580.9.6:2015
  • AS/NZS 3580.9.12:2013
  • AS 3580.13.3:1993 Methods for sampling and analysis of ambient air Method 13.3: Determination of fluorides-Total gaseous and acid-soluble airborne particulate fluoride-Sodium acetate coated tube absorption

International Organization for Standardization (ISO), Atmospheric particle meter

  • ISO 15593:2001 Environmental tobacco smoke - Estimation of its contribution to respirable suspended particles - Determination of particulate matter by ultraviolet absorbance and by fluorescence
  • ISO 16000-34:2018 Indoor air - Part 34: Strategies for the measurement of airborne particles
  • ISO 10882-1:2001 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles
  • ISO 10362-1:2019 Cigarettes — Determination of water in total particulate matter from the mainstream smoke — Part 1: Gas-chromatographic method
  • ISO 10473:2000 Ambient air - Measurement of the mass of particulate matter on a filter medium - Beta-ray absorption method
  • ISO 18144:2003 Environmental tobacco smoke - Estimation of its contribution to respirable suspended particles - Method based on solanesol
  • ISO 8518:2001 Workplace air - Determination of particulate lead and lead compounds - Flame or electrothermal atomic absorption spectrometric method
  • ISO 22253:2019 Cigarettes — Determination of nicotine in total particulate matter from the mainstream smoke with an intense smoking regime — Gas-chromatographic method
  • ISO 12884:2000 Ambient air - Determination of total (gas- and particle-phase) polycyclic aromatic hydrocarbons - Collection on sorbent-backed filters with gas chromatographic/mass spectrometric analyses
  • ISO 21832:2018 Workplace air - Metals and metalloids in airborne particles - Requirements for evaluation of measuring procedures
  • ISO 8178-1:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
  • ISO 8178-1:2017 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1: Test-bed measurement systems of gaseous and particulate emissions
  • ISO/DIS 18562-2 Biocompatibility evaluation of breathing gas pathways in healthcare applications — Part 2: Tests for emissions of particulate matter
  • ISO 8178-2:2008 Reciprocating internal combustion engines - Exhaust emission measurement - Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
  • ISO 14644-1:2015 Cleanrooms and associated controlled environments - Part 1: Classification of air cleanliness by particle concentration
  • ISO 8178-2:1996 Reciprocating internal combustion engines - Exhaust emission measurement - Part 2: Measurement of gaseous and particulate exhaust emissions at site
  • ISO 18562-2:2017 Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 2: Tests for emissions of particulate matter
  • ISO/FDIS 18562-2:2014 Biocompatibility evaluation of breathing gas pathways in healthcare applications — Part 2: Tests for emissions of particulate matter

U.S. Military Regulations and Norms, Atmospheric particle meter

Professional Standard - Environmental Protection, Atmospheric particle meter

  • HJ 1263-2022 Ambient air—Determination of total suspended particle —Gravimetric method
  • HJ 1133-2020 Determination of arsenic, selenium, bismuth and antimony in ambient air and exhaust gas particulate matter by atomic fluorescence method
  • HJ 646-2013 Ambient air and stationary source emissions.Determination of gas and particle-phase polycyclic aromatic hydrocarbons with gas chromatography/mass spectrometry
  • HJ 656-2013 Technical specifications for gravimetric measurement methods for PM<下标2.5> in ambient air
  • HJ 75-2017 Specifications for continuous emissions monitoring of SO2, NOX, andparticulate matter in the flue gas emitted fromstationarysources
  • HJ 93-2013 Specifications and test procedures for PM<下标10> and PM<下标2.5> sampler
  • HJ 647-2013 Ambient air and stationary source emissions.Determination of gas and particle-phase polycyclic aromatic hydrocarbons.High performance liquid chromatography
  • HJ 949-2018 Technical specification for investigation of permeability coefficient of ambient air particulate matter (PM 2.5 ) in civil buildings
  • HJ 1100-2020 Technical guidelines for automatic monitoring of particulate matter (PM10 and PM2.5) in ambient air by β-ray method
  • HJ 1271-2022 Ambient Air—Determination of formic acid, acetic acid and oxalic acid in particulate matter—Ion chromatography
  • HJ 657-2013 Ambient air and stationary source emission.Determination of metals in ambient particulate matter.Inductively coupled plasma/mass spectrometry (ICP-MS)
  • HJ 777-2015 Ambient air and waste gas from stationary sources emission -Determination of metal elements in ambient particle matter-Inductively coupled plasma optical emission spectrometry
  • HJ 655-2013 Technical specifications for installation and acceptance of ambient air quality continuous automated monitoring system for PM<下标10> and PM<下标2.5>
  • HJ 653-2013 Specifications and test procedures for ambient air quality continuous automated monitoring system for PM<下标10> and PM<下标2.5>
  • HJ 656-2013(XG1-2018) Ambient Air Particulate Matter (PM2.5) Manual Monitoring Method (Gravimetric Method) Technical Specification "No. 1 Amendment"
  • HJ 830-2017 Ambient air -Determination of inorganic elements in ambient particle matter- Wavelength dispersive X-ray fluorescence spectroscopy (WD-XRF) method
  • HJ 817-2018 Ambient air particulate matter (PM10 and PM2.5) continuous automatic monitoring system operation and quality control technical specifications
  • HJ 653-2021 Technical requirements and detection methods for continuous automatic monitoring system of ambient air particulate matter (PM10 and PM2.5)
  • HJ 829-2017 Ambient air -Determination of inorganic elements in ambient particle matter- Energy dispersive X-ray fluorescence spectroscopy (ED-XRF) method

Society of Automotive Engineers (SAE), Atmospheric particle meter

GOSTR, Atmospheric particle meter

Indonesia Standards, Atmospheric particle meter

  • SNI 13-6341-2000 Determination of curve related to liberation degree with particle sizes of milling product minerals
  • SNI 13-6977-2003 Mineral grain - Determination of specific surface area using test methods of Lea and Nurse permeabilities
  • SNI 7117.17-2009

SAE - SAE International, Atmospheric particle meter

  • SAE AIR6037-2010 Aircraft Exhaust Nonvolatile Particle Matter Measurement Method Development
  • SAE AIR6037A-2018 Aircraft Exhaust Nonvolatile Particle Matter Measurement Method Development

Hebei Provincial Standard of the People's Republic of China, Atmospheric particle meter

  • DB13/T 2376-2016 Determination of particulate matter in exhaust gas from stationary pollution sources β-ray method
  • DB13/T 2375-2016 Gravimetric method for determination of low-concentration particulate matter in exhaust gas from stationary pollution sources

工业和信息化部, Atmospheric particle meter

  • YB/T 4917-2021 Technical Specifications for Determination of Primary Flue Gas Particulate Matter from Converter Steelmaking

American National Standards Institute (ANSI), Atmospheric particle meter

  • ANSI/ASHRAE 52.2b-2008 Method of Testing General Ventilation Air-Cleaning Devices for Removal by Particle Size
  • ANSI/NFPA 91-2010 Standard for Exhaust Systems for Air Conveying of Vapors, Gases, Mists, and Noncombustible Particulate Solids

CEN - European Committee for Standardization, Atmospheric particle meter

  • PD CEN/TS 15439:2006 Biomass gasification - Tar and particles in product gases - Sampling and analysis
  • EN 16450:2017 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2@5)
  • EN ISO 8178-2:1996 Reciprocating Internal Combustion Engines - Exhaust Emission Measurement - Part 2: Measurement of Gaseous and Particulate Exhaust Emissions at Site

European Committee for Standardization (CEN), Atmospheric particle meter

  • CEN/TS 15439:2006 Biomass gasification - Tar and particles in product gases - Sampling and analysis
  • EN 14530:2004 Workplace atmospheres - Determination of diesel particulate matter - General requirements
  • EN ISO 13982-1:2004 Protective clothing for use against solid particulate chemicals - Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulate chemicals (type 5 clothing) (ISO 13982-1:2004)
  • PD CEN/TR 13205-3:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 3: Analysis of sampling efficiency data
  • PD CEN/TS 16450:2013 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)
  • CEN/TR 16013-2:2010 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
  • EN ISO 13982-1:2004/A1:2010 Protective clothing for use against solid particulates - Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits
  • EN ISO 13982-2:2004 Protective clothing for use against solid particulates - Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits
  • EN ISO 21832:2020 Workplace air - Metals and metalloids in airborne particles - Requirements for evaluation of measuring procedures (ISO 21832:2018)
  • CEN/TS 17458:2020 Ambient air - Methodology to assess the performance of receptor oriented source apportionment modelling applications for particulate matter
  • PD CEN/TS 17458:2020 Ambient air - Methodology to assess the performance of receptor oriented source apportionment modelling applications for particulate matter
  • FprEN 12341 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
  • CEN/TR 16013-3:2012 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3: Evaluation of airborne particle concentrations using photometers
  • EN ISO 14644-1:2015 Cleanrooms and associated controlled environments - Part 1: Classification of air cleanliness by particle concentration (ISO 14644-1:2015)
  • EN 12341:2023 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
  • EN ISO 18562-2:2020 Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 2: Tests for emissions of particulate matter (ISO 18562-2:2017)

Beijing Provincial Standard of the People's Republic of China, Atmospheric particle meter

  • DB11/T 1819-2021 Technical specifications for grid monitoring and evaluation of ambient air particulate matter
  • DB11/T 2056-2022 Technical specifications for grid-based monitoring of total suspended particulate matter in ambient air

Jiangsu Provincial Standard of the People's Republic of China, Atmospheric particle meter

  • DB32/T 4535-2023 Technical Specifications for Rapid Monitoring of Exhaust Particulate Matter from Stationary Pollution Sources
  • DB32/T 4343-2022 Portable Oscillating Balance Method for Determination of Exhaust Gas Particulates from Stationary Pollution Sources

AT-ON, Atmospheric particle meter

  • ONORM M 9453-1976 Emission limits for air contaminants; particulate matter emitted from asphalt processing plants
  • ONORM M 9462-1996 Emission limits for air contaminating particulate matter emitted from wood processing plants
  • ONORM M 5858-1997 Air analysis - Ambient air monitoring - Requirements for monitors for suspended particulate matter - Marking of conformity

CU-NC, Atmospheric particle meter

  • NC 93-02-221-1986 Standards System for Environmental Protection. Atmosphere. Gravimetric Determination of Float Dust

NL-NEN, Atmospheric particle meter

  • NEN-EN 779-1994 Particulate air filters for general ventilation. Requirements, testing, marking
  • NEN 2785-1990 Air quality - Ambient air - Collection of particulate matter for the determination of the content of metals - HVS-method

Gansu Provincial Standard of the People's Republic of China, Atmospheric particle meter

  • DB62/T 4391-2021 Determination of Exhaust Gas Particulates from Stationary Pollution Sources β-ray Absorption Method

Professional Standard - Electricity, Atmospheric particle meter

  • DL/T 1520-2016 Specifications for fine particles(PM2.5)monitoring in the thermal power plants-gravimetric method
  • DL/T 2091-2020 Test method for condensable particulate matter in flue gas of coal-fired power plants dry impact bottle method

Qinghai Provincial Standard of the People's Republic of China, Atmospheric particle meter

  • DB63/T 1873-2020 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method

Liaoning Provincial Standard of the People's Republic of China, Atmospheric particle meter

  • DB21/T 3270-2020 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method

Jiangxi Provincial Standard of the People's Republic of China, Atmospheric particle meter

  • DB36/T 1386-2021 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method

Inner Mongolia Provincial Standard of the People's Republic of China, Atmospheric particle meter

  • DB15/T 2362-2021 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method

Jilin Provincial Standard of the People's Republic of China, Atmospheric particle meter

  • DB22/T 3426-2023 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method

Anhui Provincial Standard of the People's Republic of China, Atmospheric particle meter

  • DB34/T 392-2004 Test method for laser determination of inhalable particulate matter in indoor air

PL-PKN, Atmospheric particle meter

  • PN Z04097 Arkusz 04-1974 Air purity protection Tests for size composition of dust Determination of weight particie size of dust with the aid of sedimentation pipette
  • PN Z04102-06-1986 Air purity protection Tests for cadmium and its compounds Determination of cadmium and its compounds in suspended particles in the ambient air (imision) by atomie absorption spectrometry
  • PN Z04139-05-1986 Air purity protection Tests for lead and its compounds Determination of lead and its compounds in suspended particies in the ambient air (imision) by atomie absorption spectrometry
  • PN Z04097 Arkusz 06-1974 Air purity protection Tests for size composition of dust Determination of particie size of dust with the aid of rotary separator

AENOR, Atmospheric particle meter

  • UNE-EN ISO 13982-2:2005 Protective clothing for use against solid particulates - Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits (ISO 13982-2:2004)
  • UNE-EN 481:1995 WORKPLACE ATMOSPHERES. SIZE FRACTION DEFINITIONS FOR MEASUREMENT OF AIRBORNE PARTICLES.
  • UNE-EN 16450:2017 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)
  • UNE-EN ISO 13982-1:2005 Protective clothing for use against solid particulates - Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) (ISO 13982-1:2004)
  • UNE-ISO 10473:2005 Ambient air -- Measurement of the mass of particulate matter on a filter medium -- Beta-ray absorption method
  • UNE-EN 14902:2006 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
  • UNE-EN 12341:2015 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
  • UNE-EN ISO 13982-1:2005/A1:2011 Protective clothing for use against solid particulates - Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) - Amendment 1 (ISO 13982-1:2004/AM 1:201
  • UNE 81587:2017 Workplace exposure. Determination of metals and metalloids in airborne particles. Atomic Spectrometry method.

Shanxi Provincial Standard of the People's Republic of China, Atmospheric particle meter

  • DB14/T 1440-2017 Maintenance Requirements for Airborne Atmospheric Physical Detection Instruments

ES-AENOR, Atmospheric particle meter

American Welding Society (AWS), Atmospheric particle meter

  • AWS F1.4-1997 Methods for Analysis of Airborne Particulates Generated by Welding and Allied Processes

Canadian General Standards Board (CGSB), Atmospheric particle meter

AWS - American Welding Society, Atmospheric particle meter

  • F1.1-1985 METHOD FOR SAMPLING AIRBORNE PARTICULATES GENERATED BY WELDING AND ALLIED PROCESSES

Hubei Provincial Standard of the People's Republic of China, Atmospheric particle meter

  • DB42/T 1904-2022 Portable β-ray method for the determination of low-concentration particulate matter in exhaust gas from stationary pollution sources

IT-UNI, Atmospheric particle meter

  • UNI CEN/TS 17458-2021 Ambient air - Methodology to assess the performance of receptor oriented source apportionment modelling applications for particulate matter

VN-TCVN, Atmospheric particle meter

  • TCVN 6852-2-2010 Reciprocating internal combustion engines.Exhaust emission measurement.Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions

未注明发布机构, Atmospheric particle meter

  • BS EN 12341:2023 Ambient air — Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved