ZH
RU
ES

Magnetic and non-magnetic samples

Magnetic and non-magnetic samples, Total:105 items.

In the international standard classification, Magnetic and non-magnetic samples involves: Surface treatment and coating, Iron and steel products, Testing of metals, Corrosion of metals, Electricity. Magnetism. Electrical and magnetic measurements, Magnetic materials, Spices and condiments. Food additives, Standardization. General rules, Components for electrical equipment, Quality, Water quality, Ferrous metals, Dentistry, Protection against fire, Plastics, Construction materials, Analytical chemistry, Metrology and measurement in general, Measurement of volume, mass, density, viscosity, Integrated circuits. Microelectronics, Wastes, Paint ingredients, Air quality, Technical product documentation, Medical equipment, Non-destructive testing.

YU-JUS, Magnetic and non-magnetic samples

JUS C.X5.025-1990 Magnetic materlals. Preparation of specimens for the checking of quality and testing of magnetic properties
JUS C.K5.025-1979 Magnetic sheets. Methods of testing. Preparation of specimens for the checking ofquality and testing of magnetic properties.
JUS N.A5.711-1981 Basic environmental testing procedures. Test Bb: Dry heat for non heat-dissipating specimen vvithgradual change od temperature

National Metrological Verification Regulations of the People's Republic of China, Magnetic and non-magnetic samples

JJG 352-1984 Verification Regulation of Standard Sample of The Magnetic Properties of Permanent Magnet Materials
JJG 493-1987 Verification Rigulation for Audio Magnetic Properties of Standard Specimen of Soft Magnetic Materials (A-C Magnetization Curve and Amplitude Permeability)

RU-GOST R, Magnetic and non-magnetic samples

GOST 29017-1991 Vitreous and porcelain enamels for sheet steel. Production of specimens for testing
GOST 12119.1-1998 Electrical steel. Methods of test for magnetic and electrical properties. Method for measurement of magnetic induction and coercivity in Epshtein apparatus and on ring-shaped specimens in magnetostatic field
GOST R 52482-2005 Food common salt. Sampling and sample preparation. Determination of organoleptic properties
GOST 30415-1996 Steel. Nondestructive testing of mechanical properties and microstructure of steel products by magnetic method
GOST R 51830-2001 Evaluation of biological hazard of medical dental materials and articles. Classification and sampling
GOST 8.315-1997 State system for enshuring the uniformity of measurements. Certified reference materials of composition and properties of substances and materials. Basic principles
GOST 8.315-1991 State system for ensuring the uniformity of measuring. Reference materials. Basic principles, ways of development, certification, approval, registration and use
GOST 8.531-2002 State system for ensuring the uniformity of measurements. Reference materials of composition of solid and disperse materials. Ways of homogeneity assessment
GOST 8.531-1985 State system for ensuring the uniformity of measurements. Homogeneity of powdered certified reference materials of content. Measurement procedure
GOST R ISO 16000-11-2009 Indoor air. Part 11. Determination of the emission of volatile organic compounds from building products and furnishing. Sampling, storage ofsamples and preparation of test specimens
GOST R 51148-1998 Medical devices. Requirements for samples and documentation presented for toxicological tests, sanitary and chemical analyses, tests for sterility and pyrogenicity

Korean Agency for Technology and Standards (KATS), Magnetic and non-magnetic samples

KS D 0070-2002(2022) Method of test for magnetic properties of amorphous metals using single sheet specimen
KS C IEC 60404-14:2022 Magnetic materials — Part 14: Methods of measurement of the magnetic dipole moment of a ferromagnetic material specimen by the withdrawal or rotation method
KS D 0070-2002(2017) Method of test for magnetic properties of amorphous metals using single sheet specimen
KS B ISO 15708-2:2018 Non-destructive testing —Radiation methods for computed tomography — Part 2: Principles, equipment and samples

KR-KS, Magnetic and non-magnetic samples

KS C IEC 60404-14-2022 Magnetic materials — Part 14: Methods of measurement of the magnetic dipole moment of a ferromagnetic material specimen by the withdrawal or rotation method
KS B ISO 15708-2-2018 Non-destructive testing —Radiation methods for computed tomography — Part 2: Principles, equipment and samples

Indonesia Standards, Magnetic and non-magnetic samples

SNI 07-0660-1989 Corrosion test specimens, Method of preparation, cleaning and evaluation
SNI 03-2485-1991 Stones test specimens, Laboratory test method for ultrasonic quick spreading and elastic constant

British Standards Institution (BSI), Magnetic and non-magnetic samples

BS EN 60404-6:2003 Magnetic materials. Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 200 kHz by the use of ring specimens
BS EN IEC 60404-6:2018+A1:2021 Magnetic materials - Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens
20/30403973 DC BS EN 60404-6 AMD1. Magnetic materials. Part 6 Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens
BS ISO 14560:2004 Acceptance sampling procedures by attributes. Specified quality levels in nonconforming items per million
BS 6920-2.1:2000+A3:2008 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water — Part 2: Methods of test — Section 2.1: Samples for testing
BS 6920-2.1:2014 Suitability of non-metallic materials and products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Methods of test. Samples for testing
BS 2782-9 Method 940B:1989 Methods of testing plastics. Sampling and test specimen preparation. Preparation of test specimens of amorphous thermoplastics with a specified reversion by injection moulding rectangular plates
BS EN ISO 15708-2:2019 Non-destructive testing. Radiation methods for Computed tomography. Principles, equipment and samples
BS 6920-2.1:2000 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water - Methods of test - Samples for testing

Association Francaise de Normalisation, Magnetic and non-magnetic samples

NF C28-906:2004 Magnetic materials - Part 6 : methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 200 kHz by the use of ring specimens.
NF T51-076/A1*NF EN ISO 9773/A1:2004 Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source - Amendment 1 : specimens
NF EN ISO 9773/A1:2004 Plastiques - Détermination du comportement au feu d'éprouvettes minces verticales souples au contact d'une petite flamme comme source d'allumage - Amendement 1 : éprouvettes
NF T51-076*NF EN ISO 9773:1998 Plastics. Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source.
NF EN 10341:2006 Bandes et tôles magnétiques laminées à froid en aciers non-allié et en acier allié livrées à l'état semi-fini
NF T51-072:1993 Plastics. Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source.
NF A05-213*NF EN ISO 9226:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Determination of corrosion rate of standard specimens for the evaluation of corrosivity
NF EN ISO 9773:1998 Plastiques - Détermination du comportement au feu d'éprouvettes minces verticales souples au contact d'une petite flamme comme source d'allumage

American National Standards Institute （ANSI), Magnetic and non-magnetic samples

ANSI/ASTM A912:1993 Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Rodial Specimens
ANSI/ASTM A346:1974 Test Method for Alternating-Current Magnetic Performance of Laminated Core Specimens Using the Dieterly Bridge Method
ANSI/ASTM A697:1998 Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using the Voltmeter-Ammeter-Wattmeter Methods
ANSI/ASTM A932:2001 Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Sheet Specimens

ES-UNE, Magnetic and non-magnetic samples

UNE-EN IEC 60404-6:2018/A1:2021 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens (Endorsed by Asociación Española de Normalizac...
UNE-EN IEC 60404-6:2018 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens (Endorsed by Asociación Española de Normalizac...
UNE-EN IEC 60404-6:2018/AC:2018-12 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens (Endorsed by Asociación Española de Normalizac...
UNE-CLC Guide 24:2009 Electromagnetic Compatibility (EMC) Standardization for Product Committees concerned with apparatus. (Endorsed by AENOR in February of 2015.)

Standard Association of Australia （SAA）, Magnetic and non-magnetic samples

AS 1171:1998 Non-destructive testing - Magnetic particle testing of ferromagnetic products, components and structures
AS 4544:2005 Non-destructive testing - Eddy current testing for the detection of surface flaws - Ferromagnetic and non-ferromagnetic metallic products

European Committee for Electrotechnical Standardization（CENELEC）, Magnetic and non-magnetic samples

EN 60404-6:2003 Magnetic materials Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 200 kHz by the use of ring specimens

German Institute for Standardization, Magnetic and non-magnetic samples

DIN EN 60404-6:2004 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range of 20 Hz to 200 kHz by the use of ring specimens (IEC 60404-6:2003); German version EN 60404-6:20
DIN EN 60404-6 Berichtigung 1:2009 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range of 20 Hz to 200 kHz by the use of ring specimens (IEC 60404-6:2003); German version EN 60404-6:20
DIN EN ISO 9773:2004-02 Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source (ISO 9773:1998 + Amd. 1:2003); German version EN ISO 9773:1998 + A1:2003 / Note: To be replaced by DIN EN ISO 9773 (2011-04).

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Magnetic and non-magnetic samples

GB/T 15000.3-2023 Standard sample working guidelines part 3: Standard sample determination and homogeneity and stability evaluation
GB/T 12844-1991 Series and products of nonlinear circuits for semiconductor integrated circuits--Products of sample/hold amplifiers
GB/T 2389-1980 Determination of relative content of hydrolyzed dye in reactive dyes and standards specimens

International Organization for Standardization (ISO), Magnetic and non-magnetic samples

ISO 377-1:1989 Selection and preparation of samples and test pieces of wrought steels; part 1: samples and test pieces for mechanical test
ISO 377:2013 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing
ISO 377:2017 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing
ISO 9226:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Determination of corrosion rate of standard specimens for the evaluation of corrosivity
ISO 9226:1992 Corrosion of metals and alloys; corrosivity of atmospheres; determination of corrosion rate of standard specimens for the evaluation of corrosivity

American Society for Testing and Materials (ASTM), Magnetic and non-magnetic samples

ASTM A596/A596M-95(1999) Standard Test Method for Direct-Current Magnetic Properties of Materials Using the Ballistic Method and Ring Specimens
ASTM A697/A697M-03(2008) Standard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods
ASTM A697/A697M-13 Standard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods
ASTM A912/A912M-04 Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Toroidal Specimens
ASTM A927/A927M-99 Standard Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method
ASTM A697/A697M-13(2018) Standard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods
ASTM A927/A927M-18(2022) Standard Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method
ASTM A927/A927M-11 Standard Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method
ASTM E2977-15(2023) Standard Practice for Measuring and Reporting Performance of Fourier-Transform Nuclear Magnetic Resonance (FT-NMR) Spectrometers for Liquid Samples
ASTM A697-98 Standard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods
ASTM E2977-15 Standard Practice for Measuring and Reporting Performance of Fourier-Transform Nuclear Magnetic Resonance (FT-NMR) Spectrometers for Liquid Samples
ASTM D5608-16 Standard Practices for Decontamination of Sampling and Non Sample Contacting Equipment Used at Low Level Radioactive Waste Sites

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Magnetic and non-magnetic samples

GB/T 19346.1-2017 Amorphous and nanocrystalline alloys measurement methods—Part 1：AC magnetic properties by the use of ring specimens

国家市场监督管理总局、中国国家标准化管理委员会, Magnetic and non-magnetic samples

GB/T 19346.3-2021 Methods of measurement of amorphous and nanocrystalline alloys—Part 3： AC magnetic properties of Fe-based amorphous strip using a single sheet specimen

AIA/NAS - Aerospace Industries Association of America Inc., Magnetic and non-magnetic samples

NASM16208-2000 Bolts@ Machine@ Hexagon Head@ Semifinished Corrosion Resisting Steel UNC-2A@ Nonmagnetic
NASM16206-1999 Bolts@ Machine@ Hexagon Head@ Regular Semi-Finished@ Aluminum Alloy@ Unc-2A@ Non-Magnetic
NASM16208-2013 BOLT@ TENSION@ HEXAGON HEAD@ FINISHED@ CRES@ UNC-2A@ NON-MAGNETIC@ 75 KSI FTU (Rev 3)
NASM16208-2002 Bolts@ Machine@ Hexagon Head@ Semifinished Corrosion Resisting Steel UNC-2A@ Nonmagnetic (Rev 1)
NASM16206-2012 BOLTS@ MACHINE@ HEXAGON HEAD@ REGULAR@ SEMI-FINISHED@ ALUMINUM ALLOY@ UNC-2A@ NON-MAGNETIC (Rev 1)
NASM16205-1999 Bolt@ Machine@ Regular Semi-Finished Hexagon Head@ Copper-Silicon Alloy (Silicon Bronze)@ Unc-2A@ Non-Magnetic
NASM16208-2006 BOLT@ TENSION@ HEXAGON HEAD@ FINISHED@ CORROSION RESISTANT STEEL@ UNC-2A@ NON-MAGNETIC@ 75 KSI Ftu (Rev 2)
NASM16205-2011 BOLT@ MACHINE@ REGULAR SEMI-FINISHED HEXAGON HEAD@ COPPER-SILICON ALLOY (SILICON BRONZE)@ UNC-2A@ NON-MAGNETIC (Rev 1)

Danish Standards Foundation, Magnetic and non-magnetic samples

DS/EN ISO 9773/A1:2004 Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source - Amendment 1: Specimens

European Committee for Standardization (CEN), Magnetic and non-magnetic samples

EN ISO 377:2013 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing
EN ISO 377:2017 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing
EN ISO 377:1997 Steel and Steel Products - Location and Preparation of Samples and Test Pieces for Mechanical Testing ISO 377: 1997
prEN 668-1992 Rubber floor coverings; determination of abrasion resistance using a rotating cylindrical drum device and non-rotating sample holder
EN 16016-2:2011 Non destructive testing - Radiation methods - Computed tomography - Part 2: Principle, equipment and samples

BE-NBN, Magnetic and non-magnetic samples

NBN A 23-114-1983

Professional Standard - Railway, Magnetic and non-magnetic samples

TB/T 2960-1999 Location and preparation of test blocks and specimens for testing mechanical properties of steel and steel products

Aerospace Industries Association, Magnetic and non-magnetic samples

AIA NASM16206-1999 Bolts, Machine, Hexagon Head, Regular Semi-Finished, Aluminum Alloy, Unc-2A, Non-Magnetic FSC 5306
AIA NASM16205-1999 Bolt, Machine, Regular Semi-Finished Hexagon Head, Copper-Silicon Alloy (Silicon Bronze), Unc-2A, Non-Magnetic FSC 5306
AIA NASM16208-2002 Bolts, Machine, Hexagon Head, Semifinished Corrosion Resisting Steel UNC-2A, Nonmagnetic FSC 5306; REV. 1

Aerospace Industries Association/ANSI Aerospace Standards, Magnetic and non-magnetic samples

AIA/NAS NASM16208-2013 BOLT, TENSION, HEXAGON HEAD, FINISHED, CRES, UNC-2A, NON-MAGNETIC, 75 KSI FTU (Rev 3)

CZ-CSN, Magnetic and non-magnetic samples

CSN 01 5250-1988 Mulually delivered products quality as-sessment and certification system Ccrtificate of conformity and test report on product sample testing The lay-out of forms and the way of fil-ling in

AENOR, Magnetic and non-magnetic samples

UNE-EN ISO 9773/A1:2004 Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source - Amendment 1: Specimens (ISO 9773:1998/Amd 1:2003)
UNE 73311-1:2002 Procedure to obtain samples for the determination of environmental radioactivity. Part 1: Soils, not deep layers.

Lithuanian Standards Office , Magnetic and non-magnetic samples

LST EN ISO 9773:2001/A1:2004 Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source - Amendment 1: Specimens (ISO 9773:1998/Amd 1:2003)
LST EN ISO 9773:2001 Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source (ISO 9773:1998)

SG-SPRING SG1, Magnetic and non-magnetic samples

SS 375-2-1-2015 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water - Part 2:1: Methods of test - Samples for testing

Canadian General Standards Board （CGSB), Magnetic and non-magnetic samples

CGSB 43.125-2003-CAN/CGSB-2003 Conception Et Fabrication Des Emballages Destines Au Transport Des Materes Infectieuses, Des Echantillons De Diagnostic, Des Produits Biologieques Et Des Dechets Biomedicaux

未注明发布机构, Magnetic and non-magnetic samples

BS EN ISO 9773:1999(2004) Plastics — Determination of burning behaviour of thin flexible vertical specimens in contact with a small - flame ignition source