ZH
RU
ES

pre-sintering temperature

pre-sintering temperature, Total:498 items.

In the international standard classification, pre-sintering temperature involves: Testing of metals, Welding, brazing and soldering, Coals, Ceramics, Powder metallurgy, Construction technology, Road engineering, Metalliferous minerals, Installations in buildings, Materials for aerospace construction, Equipment for the chemical industry, Reinforced plastics, Magnetic materials, Thermodynamics and temperature measurements, Radiation measurements, Plastics, Protection against fire, Pipeline components and pipelines, Construction materials, Graphic technology, Fasteners, Rubber, Explosion protection, Test conditions and procedures in general, Petroleum, petroleum products and natural gas handling equipment, Ferrous metals, Fertilizers, Adhesives, Road vehicles in general, Iron and steel products, Organic chemicals, Non-ferrous metals, Structures of buildings, Lubricants, industrial oils and related products, Products of the chemical industry, Dentistry, Electrical wires and cables, Heat recovery. Thermal insulation, Measurement of volume, mass, density, viscosity, Vibrations, shock and vibration measurements, Paint ingredients, Occupational safety. Industrial hygiene, Printed circuits and boards, Bearings, Protection of and in buildings, Solar energy engineering, Photography, Data storage devices, Domestic, commercial and industrial heating appliances, Water quality, Nuclear energy engineering, Electrical engineering in general, Insulating materials.

国家市场监督管理总局、中国国家标准化管理委员会, pre-sintering temperature

GB/T 6525-2019 Determination of compression strength for sintered metal materials at room temperature
GB/T 40389-2021 Sintered metal materials, excluding hardmetals—Measurement of surface roughness

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, pre-sintering temperature

GB/T 6525-1986 Sintered metal materials--Determination of compression strength at room temperature
GB/T 18591-2001 Welding--Guidance on the measurement of preheating temperature,interpass temperature and preheat maintenance temperature
GB/T 9343-2008 Test method for flammability of plastics.Determination of flash-ignition temperature and self-ignition temperature
GB/T 10421-2002 Sintered metal friction materials--Determination of density
GB/T 5163-1985 Permeable sintered metal materials--Determination of density
GB/T 10424-2002 Sintered metal friction materials--Determination of compressive strength
GB/T 10425-2002 Sintered metal friction materials--Determination of apparent hardness
GB/T 6804-2002 Sintered metal bushes--Determination of radial crushing strength
GB/T 6804-2008 Sintered metal bushes.Determination of radial crushing strength
GB/T 10423-2002 Sintered metal friction materials--Determination of tensile strength
GB/T 4610-1984 Test for flammability of plastics--Ignition temperature test
GB/T 31909-2015 Permeable sintered metal materials.Determination of the air permeability
GB/T 10422-2002 Sintered metal friction materials--Determination of transverse ruptue strength
GB 8209-1987 Iron one pellets and slnter - Determination of tumbler strength
GB/T 5163-2006 Sintered metal materials,excluding hardmetals.Permeable sintered metal materials.Determination of density,oil content,and open porosity
GB/T 4197-1984 Method for measuring the average grain size of sintered bar and rod of tungsten molybdenum and alloys
GB/T 9097-2016 Sintered metal materials, excluding hardmetals.Determination of apparent hardness and mincrohardness
GB/T 9095-1988 Measurement on the carburizing or nitro-caburizing harden case depth of sintering iron-based material
GB/T 5319-2002 Sintered metal materials, excluding hardmetals--Determination of transverse rupture strength
GB/T 5319-1985 Sintered metal materials,excluding hardmetals--Determination of transverse rupture strength

British Standards Institution (BSI), pre-sintering temperature

BS EN ISO 13916:2017 Welding. Measurement of preheating temperature, interpass temperature and preheat maintenance temperature
BS EN ISO 13916:1997 Welding - Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
PD IEC/TR 62518:2009 Rare earth sintered magnets. Stability of the magnetic properties at elevated temperatures
BS ISO 24033:2009 Polyethylene of raised temperature resistance (PE-RT) pipes - Effect of time and temperature on the expected strength
BS EN 14617-2:2008 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
BS EN 12470-3:2000+A1:2009 Clinical thermometers. Performance of compact electrical thermometers (non-predictive and predictive) with maximum device
BS EN ISO 2738:2000 Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity
BS EN ISO 2739:2010 Sintered metal bushes - Determination of radial crushing strength
BS EN ISO 2739:2012 Sintered metal bushings. Determination of radial crushing strength
BS ISO 12230:2012 Polybutene-1 (PB-1) pipes. Effect of time and temperature on the expected strength
BS ISO 23381:2020 Determination of salt out (crystallization) temperature of liquid fertilizers
BS EN 14617-2:2004 Agglomerated stone-Test methods-Part 2:Determination of flexural strength(bending)
BS EN 14399-2:2015 Tracked Changes. High-strength structural bolting assemblies for preloading. Suitability for preloading
BS ISO 28279:2010 Sintered metal materials. Determination of the level of cleanliness of powder-metallurgy parts
BS EN 14399-2:2005 High-strength structural bolting assemblies for preloading. Suitability test for preloading
BS EN ISO 4498:2010 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness
BS EN 14617-1:2013 Agglomerated stone. Test methods. Determination of apparent density and water absorption
BS EN 14617-1:2005 Agglomerated stone - Test methods - Determination of apparent density and water absorption
BS ISO 14317:2007 Sintered metal materials excluding hardmetals - Determination of compressive yield strength
BS ISO 14317:2015 Sintered metal materials excluding hardmetals. Determination of compressive yield strength
BS EN ISO 4498:2007 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness
BS EN ISO 13078-3:2023 Dentistry. Dental furnace - Test method for the evaluation of high temperature sintering furnace measurement with a separate thermocouple
BS ISO 23519:2010 Sintered metal materials, excluding hardmetals - Measurement of surface roughness
20/30379723 DC BS ISO 23381. Determination of Salt Out (Crystallization) Temperature of Liquid Fertilizers
BS EN ISO 3325:1999 Sintered metal materials, excluding hardmetals - Determination of transverse rupture strength
BS EN ISO 18096:2022 Thermal insulating products for building equipment and industrial installations. Determination of maximum service temperature for preformed pipe insulation
BS EN 14399-5:2015 Tracked Changes. High-strength structural bolting assemblies for preloading. Plain washers
BS ISO 10146:2019 Crosslinked polyethylene (PE-X) and crosslinked medium density polyethylene (PE-MDX). Effect of time and temperature on expected strength
BS EN 61189-11:2013 Test methods for electrical materials, printed boards and other interconnection structures and assemblies. Measurement of melting temperature or melting temperature ranges of solder alloys
17/30349922 DC BS EN 13791. Assessment of in-situ compressive strength in structures and precast concrete components
18/30377949 DC BS EN 13791. Assessment of in-situ compressive strength in structures and precast concrete components
BS EN 14399-1:2015 Tracked Changes. High-strength structural bolting assemblies for preloading. General requirements
BS EN 14399-10:2009 High-strength structural bolting assemblies for preloading - Part 10:System HRC - Bolt and nut assemblies with calibrated preload
BS EN ISO 20236:2021 Water quality. Determination of total organic carbon (TOC), dissolved organic carbon (DOC), total bound nitrogen (TN_b) and dissolved bound nitrogen (DN_b) after high temperature catalytic oxidative combustion
BS EN 14399-6:2015 Tracked Changes. High-strength structural bolting assemblies for preloading. Plain chamfered washers
BS ISO 14615:1997 Adhesives. Durability of structural adhesive joints. Exposure to humidity and temperature under load
21/30420738 DC BS EN ISO 18096. Thermal insulating products for building equipment and industrial installations. Determination of maximum service temperature for preformed pipe insulation

Association Francaise de Normalisation, pre-sintering temperature

NF A89-253*NF EN ISO 13916:2018 Welding - Measurement of preheating temperature, interpass temperature and preheat maintenance temperature
NF EN ISO 13916:2018 Soudage - Mesurage de la température de préchauffage, de la température entre passes et de la température de maintien du préchauffage
NF A89-253:1996 Welding. Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature.
NF T57-556:1973 Pre-impregnated glass fabrics. Determination of the thickness of a layer of pre-impregnated product after pressing and curing.
NF EN ISO 2739:2012 Bagues en métal fritté - Détermination de la résistance à l'écrasement radial
NF A95-325*NF EN ISO 2739:2012 Sintered metal bushings - Determination of radial crushing strength.
NF U42-681:2020 Determination of salt out (crystallization) temperature of liquid fertilizers
NF ISO 23381:2020 Détermination de la température de désolubilisation (cristallisation) des engrais liquides
NF A95-311*NF EN ISO 2738:2000 Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity.
NF EN 54-30:2015 Système de détection et d'alarme incendie - Partie 30 : détecteurs d'incendie ponctuels utilisant une combinaison de capteurs de monoxyde de carbone et de température
NF EN ISO 2738:2000 Matériaux métalliques frittés, à l'exclusion des métaux durs - Matériaux métalliques frittés perméables - Détermination de la masse volumique, de la teneur en huile et de la porosité ouverte
NF EN ISO 3369:2010 Matériaux en métal fritté imperméable et métaux-durs - Détermination de la masse volumique
NF B10-602-15:2005 Agglomerated stone - Test methods - Part 15 : determination of compressive strength.
NF A95-323*NF EN ISO 3325:1999 Sintered metal materials, excluding hardmetals. Determination of transverse rupture strength.
NF A95-321:2008 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness.
NF A95-321*NF EN ISO 4498:2010 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness
NF A95-313:1993 Impermeable sintered metal materials and hardmetals. Determination of density.
NF P18-410*NF EN 13791:2019 Assessment of in-situ compressive strength in structures and precast concrete components
NF EN 13791:2019 Évaluation de la résistance à la compression sur site des structures et des éléments préfabriqués en béton
NF EN 14399-2:2015 Boulonnerie de construction métallique à haute résistance apte à la précontrainte - Partie 2 : aptitude à l'emploi pour la mise en précontrainte
NF EN ISO 4498:2010 Matériaux métalliques frittés, à l'exclusion des métaux-durs - Détermination de la dureté apparente et de la microdureté
NF T76-052:2006 Adhesives - Wood adhesives - Determination of tensile strength of lap joints at elevated temperature (WATT '91).
NF B10-602-2:2008 Agglomerated stone - Test methods - Part 2 : determination of flexural strength (bending).
NF B10-602-2*NF EN 14617-2:2016 Agglomerated stone - Test methods - Part 2 : determination of flexural strength (bending)
NF EN ISO 3325:1999 Matériaux métalliques frittés à l'exclusion des métaux-durs - Détermination de la résistance à la rupture transversale
XP L17-740-2*XP PR EN 2833-2:1995 Aerospace series. Glass fibre thermosetting preimpregnates. Technical specification. Part 2 : glass fabric/epoxy resin preimpregnates curing at up to 125 degrees celsius for continuous use up to 80 degrees celsius.
NF A95-311:1977 POWDER METALLURGY. PERMEABLE SINTERED METAL MATERIALS. DETERMINATION OF DENSITY AND OPEN POROSITY.
NF P18-410:2007 Assessment of in-situ compressive strength in structures and precast concrete components.
NF EN 14399-5:2015 Boulonnerie de construction métallique à haute résistance apte à la précontrainte - Partie 5 : rondelles plates
NF EN 14399-9:2018 Boulonnerie de construction métallique à haute résistance apte à la précontrainte - Partie 9 : système HR ou HV - Boulons avec rondelles indicatrices de précontrainte
NF X35-203:1995 Moderate thermal environments. Determination of the pmv and ppd indices and specification of the conditions for thermal comfort.
NF A95-321-3:1988 Powder metallurgy. Sintered metal materials, excluding hardmetals. Determination of hardness. Part 3 : sintered products hardened on a surface by other treatments than in NF A 95-321-2.
NF B10-602-1:2005 Agglomerated stone - Test methods - Part 1 : determination of apparent density and water absorption.
NF B10-602-1*NF EN 14617-1:2013 Agglomerated stone - Test methods - Part 1: determination of apparent density and water absorption
NF P50-732*NF EN ISO 10211:2017 Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations
NF EN ISO 4589-2:2017 Plastiques - Détermination du comportement au feu au moyen de l'indice d'oxygène - Partie 2 : essai à la température ambiante
NF B40-374:1987 REFRACTORY PRODUCTS. PREPARED UNSHAPED MATERIALS. DENSE AND INSULATING HYDRAULIC CASTABLES. DETERMINATION OF CHARACTERISTICS OF NON-FIRED TEST PIECES AT AMBIENT TEMPERATURE.
NF D36-395*NF EN 16830:2022 Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Temperature Control function
NF A95-329:1986 Powder metallurgy. Sintered metal materials excluding hardmetals. Measurement of Vickers microhardness.
NF T90-236*NF EN ISO 20236:2021 Water quality - Determination of total organic carbon (TOC), dissolved organic carbon (DOC), total bound nitrogen (TNb) and dissolved bound nitrogen (DNb) after high temperature catalytic oxidative combustion
NF EN ISO 20236:2021 Qualité de l'eau - Dosage du carbone organique total (COT), carbone organique dissous (COD), azote lié total (TNb) et azote lié dissous (DNb) après combustion catalytique oxydante à haute température
NF EN 14399-1:2015 Boulonnerie de construction métallique à haute résistance apte à la précontrainte - Partie 1 : exigences générales
NF P85-519*NF EN ISO 9047:2010 Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at variable temperatures

International Organization for Standardization (ISO), pre-sintering temperature

ISO 13916:2017 Welding - Measurement of preheating temperature, interpass temperature and preheat maintenance temperature
ISO 13916:1996 Welding - Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
ISO/CD 4075 Polysulfone (PSU) — Effect of time and temperature on expected strength
ISO 24033:2006 Pipes made of raised-temperature-resistance polyethylene (PE-RT) - Effect of time and temperature on the expected strength
ISO 24033:2009 Polyethylene of raised temperature resistance (PE-RT) pipes - Effect of time and temperature on the expected strength
ISO/CD 4076 Polyphenylsulphone (PPSU) — Effect of time and temperature on expected strength
ISO 2739:2012 Sintered metal bushings - Determination of radial crushing strength
ISO 2739:2006 Sintered metal bushes - Determination of radial crushing strength
ISO 2739:1973 Sintered metal bushes; Determination of radial crushing strength
ISO 3213:2009 Polypropylene (PP) pipes - Effect of time and temperature on the expected strength
ISO 12230:1996 Polybutene (PB) pipes - Effect of time and temperature on the expected strength
ISO/CD 4070 Polyvinylidene fluoride (PVDF) — Effect of time and temperature on expected strength
ISO 23381:2020 Determination of salt out (crystallization) temperature of liquid fertilizers
ISO 12230:2012 Polybutene-1 (PB-1) pipes - Effect of time and temperature on the expected strength
ISO 471:1983 Rubber; Standard temperatures, humidities and times for the conditioning and testing of test pieces
ISO 10146:1997 Crosslinked polyethylene(PE-X)pipes - Effect of time and temperature on the expected strength
ISO 7060:1982 Caprolactam for industrial use; Determination of crystallizing point
ISO 28279:2010 Sintered metal materials - Determination of the level of cleanliness of powder-metallurgy parts
ISO 3369:1975 Impermeable sintered metal materials and hardmetals; Determination of density
ISO 2738:1973 Permeable sintered metal materials — Determination of density and open porosity
ISO 2738:1987 Permeable sintered metal materials; Determination of density, oil content, and open porosity
ISO 12982-1:2000 Carbonaceous materials used in the production of aluminium - Calcined coke; Determination of the reactivity to air - Part 1: Ignition temperature method
ISO 4498:2005 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness
ISO 4498:2010 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness
ISO 14317:2006 Sintered metal materials excluding hardmetals - Determination of compressive yield strength
ISO 14317:2015 Sintered metal materials excluding hardmetals - Determination of compressive yield strength
ISO 23519:2010 Sintered metal materials, excluding hardmetals - Measurement of surface roughness
ISO 3325:1975 Sintered metal materials, excluding hardmetals; Determination of transverse rupture strength
ISO/TR 11696-1:1999 Uses of reaction to fire test results - Part 1: Application of test results to predict fire performance of internal linings and other building products
ISO 3325:1996 Sintered metal materials, excluding hardmetals - Determination of transverse rupture strength
ISO/CD 3325:2023 Sintered metal materials, excluding hardmetals — Determination of transverse rupture strength
ISO 3146:1974 Plastics — Determination of melting temperature of semi-crystalline polymers — Optical method
ISO 10146:2019 Crosslinked polyethylene (PE-X) and crosslinked medium density polyethylene (PE-MDX) — Effect of time and temperature on expected strength
ISO 4507:2000 Sintered ferrous materials, carburized or carbonitrided - Determination and verification of case-hardening depth by a micro-hardness test
ISO 20236:2018 Water quality - Determination of total organic carbon (TOC), dissolved organic carbon (DOC), total bound nitrogen (TNb) and dissolved bound nitrogen (DNb) after high temperature catalytic oxidative combustion
ISO 2738:1999 Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity

German Institute for Standardization, pre-sintering temperature

DIN EN ISO 13916:2018-03 Welding - Measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO 13916:2017); German version EN ISO 13916:2017
DIN 30912-6:1990 Sintered metal materials; sint-guide-lines; part 6: fatigue strength of sintered steels
DIN EN ISO 13916:2018 Welding - Measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO 13916:2017); German version EN ISO 13916:2017
DIN 30912-6:1990-10 Sintered metal materials; sint-guide-lines; part 6: fatigue strength of sintered steels
DIN EN ISO 2739:2012-10 Sintered metal bushings - Determination of radial crushing strength (ISO 2739:2012); German version EN ISO 2739:2012
DIN EN 12470-3:2009 Clinical thermometers - Part 3: Performance of compact electrical thermometers (non-predictive and predictive) with maximum device(includes Amendment A1:2009); English version of DIN EN 12470-3:2009-11
DIN EN 14399-2:2015-04 High-strength structural bolting assemblies for preloading - Part 2: Suitability for preloading; German version EN 14399-2:2015
DIN EN 14617-2:2008 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending); German version EN 14617-2:2008
DIN EN ISO 2738:2000 Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity (ISO 2738:1999); German version EN ISO 2738:1999
DIN EN ISO 2738:2000-02 Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity (ISO 2738:1999); German version EN ISO 2738:1999
DIN ISO 4498:2005 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2005);English version of DIN ISO 4498:2005
DIN EN ISO 4498:2007 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2005); German version EN ISO 4498:2007
DIN EN 13791:2020 Assessment of in-situ compressive strength in structures and precast concrete components
DIN EN 13791:2020-02 Assessment of in-situ compressive strength in structures and precast concrete components; German version EN 13791:2019 / Note: To be amended by DIN EN 13791/A20 (2021-09).
DIN EN ISO 4498:2010-11 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2010); German version EN ISO 4498:2010
DIN EN 14257:2006 Adhesives - Wood adhesives - Determination of tensile strength of lap joints at elevated temperature (WATT'91) English version of DIN EN 14257:2006-09
DIN ISO 3369:1990 Impermeable sintered metal materials and hardmetals; determination of density; identical with ISO 3369:1975
DIN ISO 23519:2015-12 Sintered metal materials, excluding hardmetals - Measurement of surface roughness (ISO 23519:2010)
DIN EN 14399-2:2005 High-strength structural bolting assemblies for preloading - Part 2: Suitability test for preloading; German version EN 14399-2:2005
DIN EN 14399-2:2006 High-strength structural bolting assemblies for preloading - Part 2: Suitability test for preloading English version of DIN EN 14399-2:2006-06
DIN 50969-1:2009 Prevention of hydrogen-induced brittle fracture of high-strength steel building elements - Part 1: Advice on the prevention
DIN EN 14617-16:2005 Agglomerated stone - Test methods - Part 16: Determination of dimensions, geometric characteristics and surface quality of modular tiles; German version EN 14617-16:2005
DIN EN 14617-1:2013-08 Agglomerated stone - Test methods - Part 1: Determination of apparent density and water absorption; German version EN 14617-1:2013
DIN EN ISO 3325:2002-06 Sintered metal materials, excluding hardmetals - Determination of transverse rupture strength (ISO 3325:1996 + AMD 1:2001) (includes Amendment A1:2002); German version EN ISO 3325:1999 + A1:2002
DIN 53180:1996 Binders for paints and varnishes - Determination of the softening temperature of resins
DIN EN 14399-5:2015-04 High-strength structural bolting assemblies for preloading - Part 5: Plain washers; German version EN 14399-5:2015
DIN EN 14399-1:2015-04 High-strength structural bolting assemblies for preloading - Part 1: General requirements; German version EN 14399-1:2015
DIN ISO 23519:2015 Sintered metal materials, excluding hardmetals - Measurement of surface roughness (ISO 23519:2010)
DIN EN 16830:2021 Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Temperature Control function; German and English version prEN 16830:2021
DIN EN 16830:2017 Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Temperature Control function
DIN EN 14399-6:2015-04 High-strength structural bolting assemblies for preloading - Part 6: Plain chamfered washers; German version EN 14399-6:2015
DIN EN 13791/A20:2022-04 Assessment of in-situ compressive strength in structures and precast concrete components; Amendment A20

Standard Association of Australia （SAA）, pre-sintering temperature

AS ISO 13916:2018 Welding — Measurement of preheating temperature, interpass temperature and preheat maintenance temperature
AS EN 12470.3:2004 Clinical thermometers - Performance of compact electrical thermometers (non-predictive and predictive) with maximum device
AS 60695.7.51:2006 Fire hazard testing - Toxicity of fire effluent - Estimation of toxic potency - Calculation and interpretation of test results
AS 60695.7.3:2006 Fire hazard testing - Toxicity of fire effluent - Use and interpretation of test results

Hebei Provincial Standard of the People's Republic of China, pre-sintering temperature

DB13/T 2767-2018 Determination method of slagging property of raw coal for gasification - Sintering temperature method

Korean Agency for Technology and Standards (KATS), pre-sintering temperature

KS B ISO 13916:2003 Welding-Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
KS B ISO 13916:2013 Welding－Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
KS D 0033-2001 Method for determination of density of metal powder sintered materials
KS D 0033-1990 Method for determination of density of metal powder sintered materials
KS D 0033-1985 Method for determination of density of metal powder sintered materials
KS E 3714-2022 Iron ore sinter — Determination of shatter strength
KS E 3714-1981 Iron ore sinter — Determination of shatter strength
KS E 3714-1997(2002) Iron ore sinter－Determination of shatter strength
KS E 3714-2012(2017) Iron ore sinter－Determination of shatter strength
KS D ISO 2738:2011 Sintered metal materials, excluding hardmetals-Permeable sintered metal materials-Determination of density, oil content and open porosity
KS D ISO 2738:2013 Sintered metal materials, excluding hardmetals-Permeable sintered metal materials-Determination of density, oil content and open porosity
KS D ISO 2739:2011 Sintered metal bushes-Determination of radial crushing strength
KS D 0051-2012 Sintered metal bushes－Determination of radial crushing strength
KS D 0051-2002(2007) Sintered metal bushes－Determination of radial crushing strength
KS D 0033-2001(2021) Method for determination of density of metal powder sintered materials
KS E 7002-2005 Methods for determination of carbon monoxide andtemperature from combustion gases generated fromcombustion apparatus for holed coal briquette
KS E 7002-1973 Methods for determination of carbon monoxide andtemperature from combustion gases generated fromcombustion apparatus for holed coal briquette
KS D 0033-2001(2016) Method for determination of density of metal powder sintered materials
KS E 7002-2002 Methods for determination of carbon monoxide andtemperature from combustion gases generated fromcombustion apparatus for holed coal briquette
KS L 1203-2002(2022) Testing method for compressive(crushing)strength of fired whiteware materials
KS M ISO 10146:2004 Crosslinked polyethylene(PE-X) pipes－Effect of time and temperature of the expected strength
KS M ISO 10146:2019 Crosslinked polyethylene(PE-X) pipes — Effect of time and temperature on the expected strength
KS M ISO 14615:2007 Adhesives－Durability of structural adhesive joints－Exposure to humidity and temperature under load
KS D 0069-2002(2017) Method of determining the crystallization temperatures of amorphous metals
KS E 3733-2014 Determination or carbon monoxide and temperature in combustion gases of holed briquette
KS E 3733-2014(2019) Determination or carbon monoxide and temperature in combustion gases of holed briquette
KS D 0069-2002(2022) Method of determining the crystallization temperatures of amorphous metals
KS D ISO 4498:2010 Sintered metal materials, excluding hardmetals-Determination of apparent hardness and microhardness
KS D ISO 14317:2012 Sintered metal materials excluding hardmetals-Determination of compressive yield strength
KS M ISO 4589-2:2016 Plastics－Determination of burning behaviour by oxygen index－Part 2：Ambient-temperature test
KS M ISO 4589-2-2016(2021) Plastics－Determination of burning behaviour by oxygen index－Part 2：Ambient-temperature test
KS D ISO 3325:2011 Sintered metal materials, excluding hardmetals-Determination of transverse rupture strength
KS A ISO 18921-2011(2021) Imaging materials－Compact discs(CD ROM)－Method for estimating the life expectancy based on the effects of temperature and relative humidity
KS A ISO 18921-2011(2016) Imaging materials－Compact discs(CD ROM)－Method for estimating the life expectancy based on the effects of temperature and relative humidity
KS B 2104-2013 Method for determination of radial crushing strength constant of metal powder sintered bearing, oil impregnated
KS B 2104-2005(2010) Method for determination of radial crushing strength constant of metal powder sintered bearing, oil impregnated
KS A ISO 18927:2006 Imaging materials-Recordable compact disc systems ―Method for estimating the life expectancy based on the effects of temperature and relative humidity
KS M 1801-2017 Measuring methods of crystalizing temperature and water absorption in 290 nm for industrial caprolactam

CEN - European Committee for Standardization, pre-sintering temperature

EN ISO 13916:2017 Welding - Measurement of preheating temperature@ interpass temperature and preheat maintenance temperature
PREN 13791-2018 Assessment of in-situ compressive strength in structures and precast concrete components
EN 14617-2:2004 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
EN ISO 3325:1999 Sintered Metal Materials@ Excluding Hardmetals - Determination of Transverse Rupture Strength
EN 14617-1:2005 Agglomerated stone - Test methods - Part 1: Determination of apparent density and water absorption
EN 14399-10:2018 High-strength structural bolting assemblies for preloading - Part 10: System HRC - Bolt and nut assemblies with calibrated preload

Danish Standards Foundation, pre-sintering temperature

DS/EN ISO 13916:1997 Welding - Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
DS/ISO 24033:2009 Polyethylene of raised temperature resistance (PE-RT) pipes - Effect of time and temperature on the expected strength
DS/ISO 1392:1986 Determination of crystallizing point — General method
DS/EN ISO 2739:2012 Sintered metal bushings - Determination of radial crushing strength
DS/ISO 471:1985 Rubber. Standard temperatures, humidities and times for the conditioning and testing of test pieces
DS/ISO 12230:2012 Polybutene-1 (PB-1) pipes - Effect of time and temperature on the expected strength
DS/EN ISO 2738:2000 Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity
DS/EN 23369:1994 Impermeable sintered metal materials and hardmetals-Determination of density
DS/EN ISO 3369:2010 Impermeable sintered metal materials and hardmetals - Determination of density
DS/EN 13791:2007 Assessment of in-situ compressive strength in structures and precast concrete components
DS/EN ISO 4498:2010 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness
DS/EN ISO 3325:2000 Sintered metal materials, excluding hardmetals - Determination of transverse rupture strength
DS/EN ISO 10211:2008 Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations
DS/ISO 18927:2013 Imaging materials - Recordable compact disc systems - Method for estimating the life expectancy based on the effects of temperature and relative humidity
DS/EN ISO 3325/A1:2002 Sintered metal materials, excluding hardmetals - Determination of transverse rupture strength - Amendment 1: Precision statement

Japanese Industrial Standards Committee (JISC), pre-sintering temperature

JIS Z 3703:2004 Welding -- Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
JIS Z 2505:1989 Method for determination of density of metal powder sintered materials
JIS M 8711 AMD 1:2017 Iron ore sinter -- Determination of shatter strength (Amendment 1)
JIS Z 2507:2000 Sintered metal bearing -- Determination of radial crushing strength
JIS H 7151:1991 Method of determining the crystallization temperatures of amorphous metals
JIS K 6795:1998 Crosslinked polyethylene (PE-X) pipes -- Effect of time and temperature on the expected strength
JIS Z 2501:2000 Sintered metal materials -- Determination of density, oil content, and open porosity

Professional Standard - Light Industry, pre-sintering temperature

QB/T 1547-2016 Test method for sintering temperature range of ceramic material
QB/T 1547-1992 Method for determination of sintering temperature range of ceramic materials

ES-UNE, pre-sintering temperature

UNE-EN ISO 13916:2018 Welding - Measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO 13916:2017)
UNE-EN 14399-2:2016 High-strength structural bolting assemblies for preloading - Part 2: Suitability for preloading
UNE-EN 13791:2020 Assessment of in-situ compressive strength in structures and precast concrete components
UNE-EN 14399-5:2016 High-strength structural bolting assemblies for preloading - Part 5: Plain washers
UNE-EN 14399-1:2016 High-strength structural bolting assemblies for preloading - Part 1: General requirements
UNE-EN ISO 20236:2022 Water quality - Determination of total organic carbon (TOC), dissolved organic carbon (DOC), total bound nitrogen (TNb) and dissolved bound nitrogen (DNb) after high temperature catalytic oxidative combustion (ISO 20236:2018)
UNE-EN 14399-6:2016 High-strength structural bolting assemblies for preloading - Part 6: Plain chamfered washers
UNE-EN 14399-10:2019 High-strength structural bolting assemblies for preloading - Part 10: System HRC - Bolt and nut assemblies with calibrated preload

CZ-CSN, pre-sintering temperature

CSN 44 1789-1985 Iron ores, aglomerates and pellets. Method for determination of start temperature and temperature interval of softening.
CSN 42 0891 Cast.3-1982 Hardness test for sintered products
CSN 65 0311-1981 Method for determination of rystallization temperature
CSN 42 0892 Cast.3-1980 Testing of sintered carbides. Determination of density
CSN 72 5034-1973 Testing of fired ceramic materials. Definition of the resistance to temperature change
CSN 42 0891 Cast.4-1986 Testing of sintered products. Deflection test
CSN 42 0891 Cast.10-1986 Testing of sintered products. Determination of radial crushing strength
CSN 42 0892 Cast.8-1981 Testing of sintered carbides. Vickers hardness test.
CSN 25 8158-1973 Thermometers for determination of congealing point on bulb
CSN 42 0349-1988 Metal testing. Determination of the nil-ductility transition temperature of structural steels
CSN 42 0892 Cast.5-1980 Testing of sintered carbides. Determination of transverse rupture strength
CSN 42 0892 Cast.4-1981 Testing of sintered carbides. Rockwell hardness test (scale A)
CSN 42 0892 Cast.11-1983 Testing of sintered carbides Determination of porosity and uncombined carbon.
CSN 44 1824-1980 Iron ores, aglomerates and pellets. Method for determination of strenght in rotating drum
CSN 44 1788-1984 Iron ores, aglomerates and pellets. Method of determination of reduction strenght
CSN 44 1822-1989 Iron ores and manganese ores, agglomerates and pellets. Methods for determination of specific, apparent and bulk density
CSN 42 0350-1987 Metal testing. Determination of brittleness temperature of structural steels by impact bending test
CSN 72 7032-1983 Determination of water-vapour diffusion of building materials and constructions by method with temperature gradient.
CSN 44 1823-1983 Iron ores, aglomerates and pellets. Methods for determination of strength by shatter test
CSN 44 1784-1987 Iron ores, agglomerates and pellets. Lowtemperature disintegration test. Method using cold tumbling after static reduction

American Concrete Institute, pre-sintering temperature

ACI 209R-1992 Prediction of Creep, Shrinkage, and Temperature Effects in Concrete Structures
ACI 435R-2020 Report on Deflection of Nonprestressed Concrete Structures (IN-LB Units and SI Units)

AT-ON, pre-sintering temperature

ONORM EN ISO 13916:1996 Welding-Guidance on the measurement of preheating trmperature,interpass temperature and preheat maintenance temperature
ONORM H 5195-1-2001 Prevention of damage by corrosion and scale formation in closed warm-water-heating systems up to 100 ℃ operating tempertures
OENORM EN 16830-2021 Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Temperature Control function

European Committee for Standardization (CEN), pre-sintering temperature

EN ISO 13916:1996 Welding - Guidance on the Measurement of Preheating Temperature, Interpass Temperature and Preheat Maintenance Temperature ISO 13916: 1996
EN ISO 2739:2010 Sintered metal bushes - Determination of radial crushing strength
EN ISO 2739:2012 Sintered metal bushings - Determination of radial crushing strength (ISO 2739:2012)
EN 14617-2:2008 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
EN 12470-3:2000 Clinical thermometers - Part 3: Performance of compact electrical thermometers (non-predictive and predictive) with maximum device Incorporates Amendment A1: 2009
EN ISO 2739:1998 Sintered Metal Bushes - Determination of Radial Crushing Strength ISO 2739:1973
EN 14617-15:2005 Agglomerated stone - Test methods - Part 15: Determination of compressive strength
prEN 23369-1992 Impermeable sintered metal materials and hardmetals; determination of density (ISO 3369:1975)
EN 14399-2:2005 High-strength structural bolting assemblies for preloading - Part 2: Suitability test for preloading
EN 14399-2:2015 High-strength structural bolting assemblies for preloading - Part 2: Suitability for preloading
EN ISO 4498:2010 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2010)
EN ISO 7625:2010 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content
EN 14617-2:2016 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
EN 13494:2002 Thermal insulation products for building applications - Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material
EN 13470:2001 Thermal insulating products for building equipment and industrial installations - Determination of the apparent density of preformed pipe insulation
EN 14707:2012 Thermal insulating products for building equipment and industrial installations - Determination of maximum service temperature for preformed pipe insulation
EN 23369:1993 Impermeable Sintered Metal Materials and Hardmetals - Determination of Density (ISO 3369: 1975)
EN 14617-1:2013 Agglomerated stone - Test methods - Part 1: Determination of apparent density and water absorption
EN ISO 10211:2017 Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations
EN ISO 3369:2010 Impermeable sintered metal materials and hardmetals - Determination of density (ISO 3369:2006)
EN 16830:2017 Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Temperature Control function
FprEN 16830-2021 Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Temperature Control function
EN 14399-10:2009 High-strength structural bolting assemblies for preloading - Part 10: System HRC - Bolt and nut assemblies with calibrated preload
EN ISO 4498:2007 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness [Superseded: CEN EN 24498-1]
EN ISO 20236:2021 Water quality - Determination of total organic carbon (TOC), dissolved organic carbon (DOC), total bound nitrogen (TNb) and dissolved bound nitrogen (DNb) after high temperature catalytic oxidative combustion (ISO 20236:2018)

Group Standards of the People's Republic of China, pre-sintering temperature

T/CECS 1023-2022 Technical specifications for prefabricated self-insulating walls of sintered silt porous bricks
T/REIANM 0302-2022 Sintered NdFeB alloy powder—Determination of Density Part 1 ：Determination of Aerated Bulk density
T/REIANM 0303-2022 Sintered NdFeB alloy powder—Determination of Density Part 2 ：Determination of Packed Bulk Density

AASHTO - American Association of State Highway and Transportation Officials, pre-sintering temperature

T 317-2004 Standard Method of Test for Prediction of Asphalt-Bound Pavement Layer Temperatures
T 317-2002 Standard Method of Test for Prediction of Asphalt-Bound Pavement Layer Temperatures (HM-22; Part IIB)

American Society for Testing and Materials (ASTM), pre-sintering temperature

ASTM D7228-06a(2011) Standard Test Method for Prediction of Asphalt-Bound Pavement Layer Temperatures
ASTM E377-96(2002) Standard Practice for Internal Temperature Measurements in Low-Conductivity Materials
ASTM E377-96 Standard Practice for Internal Temperature Measurements in Low-Conductivity Materials
ASTM E377-08(2015) Standard Practice for Internal Temperature Measurements in Low-Conductivity Materials
ASTM F470-89(2003) Standard Practice for Caking Temperature of Dry Electrostatic Toner
ASTM E1502-98(2003)e1 Standard Guide for Use of Freezing-Point Cells for Reference Temperatures
ASTM E1502-16 Standard Guide for Use of Fixed-Point Cells for Reference Temperatures
ASTM E2021-06 Standard Test Method for Hot-Surface Ignition Temperature of Dust Layers
ASTM E2021-01 Standard Test Method for Hot-Surface Ignition Temperature of Dust Layers
ASTM E2021-00 Standard Test Method for Hot-Surface Ignition Temperature of Dust Layers
ASTM E377-08 Standard Practice for Internal Temperature Measurements in Low-Conductivity Materials
ASTM E2021-15 Standard Test Method for Hot-Surface Ignition Temperature of Dust Layers
ASTM E2021-09(2013) Standard Test Method for Hot-Surface Ignition Temperature of Dust Layers
ASTM E2021-09 Standard Test Method for Hot-Surface Ignition Temperature of Dust Layers
ASTM B294-10 Standard Test Method for Hardness Testing of Cemented Carbides
ASTM D7228-06a(2015) Standard Test Method for Prediction of Asphalt-Bound Pavement Layer Temperatures
ASTM D7228-06 Standard Test Method for Prediction of Asphalt-Bound Pavement Layer Temperatures
ASTM D7228-06a Standard Test Method for Prediction of Asphalt-Bound Pavement Layer Temperatures
ASTM B406-96(2010) Standard Test Method for Transverse Rupture Strength of Cemented Carbides
ASTM B771-11 Standard Test Method for Short Rod Fracture Toughness of Cemented Carbides
ASTM D3829-02 Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil
ASTM D3829-20 Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil
ASTM D3829-93(1998) Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil
ASTM D3829-18 Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil
ASTM D3829-17 Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil
ASTM D3829-20a Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil
ASTM D3829-02(2007) Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil
ASTM D3829-12 Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil
ASTM D3829-14 Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil
ASTM C1146-96(2003) Standard Guide for Prefabricated Panel Insulation Systems for Ducts and Equipment Operating at Temperatures Above Ambient Air
ASTM C1146-09(2013) Standard Guide for Prefabricated Panel and Hndash;bar Insulation Systems for Vessels, Ducts and Equipment Operating at Temperatures Above Ambient Air
ASTM C1146-09 Standard Guide for Prefabricated Panel and Hx2013;bar Insulation Systems for Vessels, Ducts and Equipment Operating at Temperatures Above Ambient Air
ASTM B312-96(2002) Standard Test Method for Green Strength for Compacted Metal Powder Specimens
ASTM B312-96 Standard Test Method for Green Strength for Compacted Metal Powder Specimens
ASTM B312-09 Standard Test Method for Green Strength of Specimens Compacted from Metal Powders
ASTM D1151-00(2022) Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds
ASTM C667-09 Standard Specification for Prefabricated Reflective Insulation Systems for Equipment and Pipe Operating at Temperatures above Ambient Air
ASTM C667-09(2014) Standard Specification for Prefabricated Reflective Insulation Systems for Equipment and Pipe Operating at Temperatures above Ambient Air
ASTM B328-96(2003) Standard Test Method for Density, Oil Content, and Interconnected Porosity of Sintered Metal Structural Parts and Oil-Impregnated Bearings
ASTM C1847-21 Standard Specification for Direct Buried Pre-Insulated and Jacketed Polyurethane Bonded Low Temperature Hot Water Piping Systems
ASTM D7998-15 Standard Test Method for Measuring the Effect of Temperature on the Cohesive Strength Development of Adhesives using Lap Shear Bonds under Tensile Loading
ASTM B328-96 Standard Test Method for Density, Oil Content, and Interconnected Porosity of Sintered Metal Structural Parts and Oil-Impregnated Bearings
ASTM B328-96(2003)e1 Standard Test Method for Density, Oil Content, and Interconnected Porosity of Sintered Metal Structural Parts and Oil-Impregnated Bearings
ASTM A1077/A1077M-21 Standard Specification for Structural Steel with Improved Yield Strength at High Temperature for Use in Buildings
ASTM A1077/A1077M-14 Standard Specification for Structural Steel with Improved Yield Strength at High Temperature for Use in Buildings
ASTM C907-03 Standard Test Method for Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method
ASTM C907-03(2008) Standard Test Method for Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method
ASTM C907-03(2012) Standard Test Method for Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method
ASTM D1151-00 Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds
ASTM D1151-00(2006) Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds
ASTM E900-21 Standard Guide for Predicting Radiation-Induced Transition Temperature Shift in Reactor Vessel Materials

RU-GOST R, pre-sintering temperature

GOST 26517-1985 Irom ores, agglomerates and pellets. Method for determination of initial softening point and temperature range of softening
GOST 27446-1987 Iron ores, aglomerates and pellets. Method for determination of strength after low-temperature static reduction
GOST 16126-1991 Coal. Determination of caking power. Gray-King method
GOST R 57360-2016 Construction of concrete prefabricated. Determination of strength of concrete in compression
GOST 20784-1975 Manganese ore concentrates and agglomerates. Methods of sampling and sample preparation for mechanical strength determination
GOST 27034-1986 Sintered hard metals. Method of compression and yield strength determination
GOST 18228-1994 Sintered metal materials excluding hard metals. Determination of transverse rupture strength
GOST 18228-1985 Powder metallurgy. Determination of bending strength limit
GOST 25698-1998 Sintered metal materials, excluding hardmetals. Determination of apparent hardness. Materials of essentially uniform section hardness
GOST 25698-1983 Powder articles. Methods of determination of hardness
GOST 33121-2014 Glued timber structures. Methods for determining the resistance of glue joints to the temperature and humidity effects
GOST 28976-1991 Photovoltaic devices of crystalline silicon. Procedures for temperature and irradiance corrections to measured current voltage characteristics
GOST 15137-1977 Iron and manganese ores, agglomerates and pellets. Determination of tumbler strength

VN-TCVN, pre-sintering temperature

TCVN 4645-1988 Sintered materials.Determination of hardness
TCVN 4646-1988 Sintered materials.Method for testing impact strength
TCVN 4648-2009 Sintered metal bushes.Determination of radial crushing strength

American Welding Society (AWS), pre-sintering temperature

AWS PHSS WC& DC-1996 Suggested Pretemperatures for Welding Structural Steel Materails Wall and Desk Charts
WRC 147:1970(1976) Transition-Temperature Data for Five Structural Steels

工业和信息化部, pre-sintering temperature

YB/T 4606-2017 Determination of drop strength of sinter
YS/T 1482-2021 Determination of strength of tubular compacts of sintered metal porous materials
JB/T 14680-2022 Determination of effective hardening depth after induction hardening of sintered iron-based parts

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), pre-sintering temperature

ASHRAE NA-04-8-4-2004 Predicting Indoor Temperature and Humidity Conditions Including Hygrothermal Interactions with the Building Envelope

Society of Automotive Engineers (SAE), pre-sintering temperature

SAE AMS7725D-2007 Tungsten Heavy Alloy Shapes, Sintered, High Density
SAE AMS7725E-2012 Tungsten Alloy Shapes, Sintered, High Density
SAE AMS7910C-2010 Beryllium Near-Net Preforms Standard Grade Cold Isostatic Pressed, Sintered
SAE AMS3657C-1993 Polytetrafluoroethylene Extrusions, Premium Strength, As Sintered
SAE AMS3656E-1993 Polytetrafluoroethylene Extrusions, Normal Strength, As Sintered
SAE AMS3657D-2008 Polytetrafluoroethylene (PTFE) Extrusions, Premium Strength, As Sintered
SAE AMS3656F-2008 Polytetrafluoroethylene (PTFE) Extrusions, Normal Strength, As Sintered
SAE AMS3657F-2011 Polytetrafluoroethylene (PTFE) Extrusions, Premium Strength, As Sintered
SAE AMS3657E-2010 Polytetrafluoroethylene (PTFE) Extrusions, Premium Strength, As Sintered
SAE AMS3656H-2011 Polytetrafluoroethylene (PTFE) Extrusions, Normal Strength, As Sintered
SAE AMS3659C-1993 Polytetrafluoroethylene Extrusions, Premium Strength, Sintered and Stress-Relieved
SAE AMS3659F-2011 Polytetrafluoroethylene (PTFE) Extrusions, Premium Strength, Sintered and Stress-Relieved

BE-NBN, pre-sintering temperature

International Electrotechnical Commission (IEC), pre-sintering temperature

IEC TR 62518:2009 Rare earth sintered magnets - Stability of the magnetic properties at elevated temperatures
IEC 61034-1:2013 Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus
IEC 61034-1:2019 Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus
IEC 61034-1:2005+AMD1:2013 CSV Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus
IEC 61034-2:2019 Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements
IEC 61034-2:2005+AMD1:2013 CSV Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., pre-sintering temperature

ASHRAE 4492-2001 Relative Humidity and Temperature Measurements and Predictions in Supermarkets
ASHRAE 4139-1998 A Simple Methodology to Predict Local Temperature and Humidity
ASHRAE 3763-1994 Predicting the Temperature@ Humidity@ Pressure@ and/or Density Effects on Velocity Instrumentation
ASHRAE 3630-1993 Simplified Model for Predicting Vertical Temperature Distribution in a Large Space
ASHRAE 4716-2004 Effect of Boundary Condition on the Prediction of Temperature Distribution for Curtain Walls
ASHRAE CH-93-2-1993 Heat Transfer Psychrometrics and Coil Frosting at Freezer Temperatures
ASHRAE AC-02-10-1-2002 Economic Assessment of Low Firing Temperature Absorption Chiller Systems
ASHRAE CH-03-10-1-2003 THERM Simulations of Window Indoor Surface Temperatures for Predicting Condensation
ASHRAE 4401-2000 Air Temperature Depression and Potential Icing at the Inlet of Stationary Combustion Turbines (RP-1019)
ASHRAE 3955-1996 Application of an Unsteady-State Model for Predicting Vertical Temperature Distribution to an Existing Atrium
ASHRAE SE-99-12-03-1999 New Approach to Edge-Glass Temperature Prediction and its Application to Predicting Thermal Breakage in Insulated Glazing Units
ASHRAE TO-98-23-4-1998 Prediction of Short-Term and Long-Term VOC Emissions from SBR Bitumen-Backed Carpet under Different Temperatures
ASHRAE 4418-2001 Prediction of Skin and Clothing Temperatures Under Thermal Transient Considering Moisture Accumulation in Clothing
ASHRAE AT-01-15-3-2001 Condensation and Icing in Gas Turbine Systems: Inlet Air Temperature and Humidity Limits
ASHRAE ST-16-012-2016 Optimizing Excess Air in Relation to Energy@ Temperature@ and Reduction of Emissions of Methane Gas in a Combustion Nozzle— Using Numerical Combustion Modeling
ASHRAE 4836-2006 Model Predictive Control of Supply Air Temperature and Outside Air Intake Rate of a VAV Air-Handling Unit
ASHRAE 3934-1996 Ambient Temperature and Solar Radiation Prediction for Predictive Control of HVAC Systems and a Methodology for Optimal Building Heating Dynamic Operation

Association of German Mechanical Engineers, pre-sintering temperature

VDI/VDE 3511 Blatt 4.2-2014 Temperature measurement in industry - Radiation thermometry - Maintenance and intended operation of radiation thermometers

Underwriters Laboratories (UL), pre-sintering temperature

UL 1709-2005 UL Standard for Safety Rapid Rise Fire Tests of Protection Materials for Structural Steel Third Edition, Reprint with Revisions Through and Including April 6, 2007

IN-BIS, pre-sintering temperature

未注明发布机构, pre-sintering temperature

JIS M 8711:2023 Iron ore sinter -- Determination of shatter strength
BS EN ISO 3325:1999(2002) Sintered metal materials, excluding hardmetals — Determination of transverse rupture strength
IPC TR-465-2 Effect of Steam Aging Time and Temperature on Solderability Test Results
BS EN ISO 20236:2021(2022) Water quality — Determination of total organic carbon (TOC), dissolved organic carbon (DOC), total bound nitrogen (TNb) and dissolved bound nitrogen (DNb) after high temperature catalytic oxidative combustion

Lithuanian Standards Office , pre-sintering temperature

LST EN 12470-3-2001+A1-2009 Clinical thermometers - Part 3: Performance of compact electrical thermometers (non-predictive and predictive) with maximum device
LST EN ISO 2739:2012 Sintered metal bushings - Determination of radial crushing strength (ISO 2739:2012)
LST EN ISO 2738:2002 Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity (ISO 2738:1999)
LST EN 13791-2007 Assessment of in-situ compressive strength in structures and precast concrete components
LST EN ISO 3369:2010 Impermeable sintered metal materials and hardmetals - Determination of density (ISO 3369:2006)
LST EN ISO 4498:2010 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2010)

Professional Standard - Ferrous Metallurgy, pre-sintering temperature

YB/T 5166-1993 Determination of drum strength of sinter and pellets

AENOR, pre-sintering temperature

UNE 31011:1976 IMFLAMMATION TEMPERATURE OF NITROCELUSOSES, POWDERS AND EXPLOSIVES.
UNE-EN ISO 2739:2012 Sintered metal bushings - Determination of radial crushing strength (ISO 2739:2012)
UNE 40462:1983 TEXTILE FLOOR COVERINGS. BURNING BEHAVIOUR. TABLET TES AT AMBIENT TEMPERATURE
UNE-EN 13791:2009 Assessment of in-situ compressive strength in structures and precast concrete components
UNE-EN ISO 2738:2000 SINTERED METAL MATERIALS, EXCLUDING HARDMETALS. PERMEABLE SINTERED METAL MATERIALS. DETERMINATION OF DENSITY, OIL CONTENT AND OPEN POROSITY (ISO 2738:1999)
UNE-EN ISO 3369:2011 Impermeable sintered metal materials and hardmetals - Determination of density (ISO 3369:2006)
UNE-EN ISO 4498:2011 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2010)

AGMA - American Gear Manufacturers Association, pre-sintering temperature

P149.03-1983 Prediction of the Peak Temperature on the Surface of Thermoplastic Gear Teeth

Professional Standard - Non-ferrous Metal, pre-sintering temperature

YS/T 1009-2014 Sintered metal porous materials.Determination of shear strength
YS/T 1010-2014 Test method for ring tensile strength of sintered porous metal
YS/T 485-2005 Sintered bimetal material-Determination of shear strength
YS/T 63.22-2009 Carbonaceous materials used in the production of aluminium.Part 22:Determination of baking level expressed by equivalent temperature

SE-SIS, pre-sintering temperature

SIS 11 22 52-1974 Sintered metal bushes. Determination of radial crushing strength
SIS 16 22 21-1974 Rubber. Determination of temperature of retraction after freezing
SIS SS 11 70 11-1982 Powder metallurgy - Sintered steel - Determination of case hardened depth

PL-PKN, pre-sintering temperature

PN H04942-1986 Sintered metal materials Determination of transverse rupture strength
PN C04187-1993 Petroleum products. Predicting of bordeline pumping temperature (BPT) of engine oils
PN C89425-1992 Plastics. Determination of melting temperature of semi-crystalline polymers
PN C45301-08-1993 Caprolactam. Method of test. Determination of crystalizing point
PN B02015-1986 Actions on building structures Variable environmental actions Temperature action

KR-KS, pre-sintering temperature

KS D ISO 2739-2011 Sintered metal bushes－Determination of radial crushing strength
KS M ISO 10146-2019 Crosslinked polyethylene(PE-X) pipes — Effect of time and temperature on the expected strength
KS D ISO 2738-2011 Sintered metal materials, excluding hardmetals－Permeable sintered metal materials－Determination of density, oil content and open porosity
KS D ISO 3369-2011 Impermeable sintered metal materials and hardmetals－Determination of density
KS D ISO 4498-2010 Sintered metal materials, excluding hardmetals－Determination of apparent hardness and microhardness
KS M ISO 4589-2-2016 Plastics－Determination of burning behaviour by oxygen index－Part 2：Ambient-temperature test
KS D ISO 14317-2012 Sintered metal materials excluding hardmetals－Determination of compressive yield strength
KS D ISO 3325-2011 Sintered metal materials, excluding hardmetals－Determination of transverse rupture strength

ZA-SANS, pre-sintering temperature

SANS 471:2003 Rubber - Temperatures, humidities and times for conditioning and testing

American National Standards Institute （ANSI), pre-sintering temperature

ANSI/UL 1709-2005 Standard for Safety for Rapid Rise Fire Tests of Protection Materials for Structural Steel
ANSI/UL 1709-2007 Standard for Rapid Rise Fire Tests of Protection Materials for Structural Steel (Proposals dated 12-22-06)

WRC - Welding Research Council, pre-sintering temperature

BULLETIN 147-1970 TRANSITION-TEMPERATURE DATA FOR FIVE STRUCTURAL STEELS
BULLETIN 148-1970 TRANSITION-TEMPERATURE DATA FOR FIVE STRUCTURAL STEELS

AWS - American Welding Society, pre-sintering temperature

PHSS WC & DC-1996 Suggested Pretemperatures for Welding Structural Steel Materails Wall and Desk Charts

RO-ASRO, pre-sintering temperature

STAS 8265-1979 Sintered metal powder products EST OF THE TRANSVERSE RUPTURE STRENGTH
STAS 10101/23-1975 Actions upon structures LOADS DUE TO THE EXTERNAL TEMPERATURE
STAS SR EN 23369-1995 Impermeable sintered metal materials and hardmetals. Determination of density
STAS SR ISO 2738:1994 Permeable sintered metal materials - Determination of density, oil content, and open porosity
STAS 6877/9-1976 ELECTRICAL EQUIPMENTS FOR EXPLOSIVE ATMOSPHERES Determination of ignition tcmperature of gases and. vapours
STAS 10101/23A-1978 Actions upon structures LOADS DUE TO THE EXTERNAL TEMPERATURE UPON NON-INDUSTRIAL AND INDUSTRIAL STRUCTURES

Professional Standard - Building Materials, pre-sintering temperature

JC/T 796-2013 The method of evaluating the fired common brick strength grading by rebound hammer
JC/T 796-1999 The method of evaluating the fired common brick strength grading by rebound hammer

The American Road & Transportation Builders Association, pre-sintering temperature

AASHTO T 317-2004 Standard Method of Test for Prediction of Asphalt-Bound Pavement Layer Temperatures
AASHTO T 317-2002 Standard Method of Test for Prediction of Asphalt-Bound Pavement Layer Temperatures HM-22; Part IIB

CU-NC, pre-sintering temperature

NC 33-67-1987 Oil Industry. Fuels for Engines Determination of Roilling Temperatures, Crystallization Start and Crystallization

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, pre-sintering temperature

GB/T 34905-2017 Sintered metal materials—Determination of the level of cleanliness of powder-metallurgy parts

Professional Standard - Machinery, pre-sintering temperature

JB/T 7378-2010 Metallographic method of measurment on the carbunitrided harden case depth of sintering iron-based material

IT-UNI, pre-sintering temperature

EC 1-2021 UNI EN 13791-2021 Assessment of in-situ compressive strength in structures and precast concrete components

ANSI - American National Standards Institute, pre-sintering temperature

IT9.21-1996 Life Expectancy of Compact Discs (CD-Rom) - Method for Estimating@ Based on Effects of Temperature and Relative Humidity (IS&T)
IT9.26-1997 Imaging Materials - Life Expectancy of Magneto-Optic (MO) Disks - Method for Estimating@ Based on Effects of Temperature and Relative Humidity (IS&T)

(U.S.) Ford Automotive Standards, pre-sintering temperature

FORD S-M10A1013-A-2003 SINTER STEEL, MEDIUM STRENGTH, COPPER CONTAINING ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSD-M10A88-A-2012 SINTERED IRON, LOW ALLOY, HIGH SPEED, INFILTRATED ***TO BE USED WITH FORD WSS-M99P1111-A***

YU-JUS, pre-sintering temperature

JUS C.A2.041-1990 Perneable sintered metal materials. Determinaticm of densitj, oil content and open porosity

NL-NEN, pre-sintering temperature

NEN-ISO 3369:1993 Impermeable sintered metal materials and hardmetals. Determination of density (ISO 3369:1975)

ATIS - Alliance for Telecommunications Industry Solutions, pre-sintering temperature

0600010.01-2008 Temperature@ Humidity@ and Altitude Requiprements for Network Telecommunications Equipment Utilized in Outside Plant Environments (Pre-Pub)

ES-AENOR, pre-sintering temperature

未注明发布机构, pre-sintering temperature

JIS M 8711:2023 Iron ore sinter -- Determination of shatter strength
BS EN ISO 3325:1999(2002) Sintered metal materials, excluding hardmetals — Determination of transverse rupture strength
IPC TR-465-2 Effect of Steam Aging Time and Temperature on Solderability Test Results
BS EN ISO 20236:2021(2022) Water quality — Determination of total organic carbon (TOC), dissolved organic carbon (DOC), total bound nitrogen (TNb) and dissolved bound nitrogen (DNb) after high temperature catalytic oxidative combustion

GM North America, pre-sintering temperature

GM 9982285-2009 Adhesive, One-Part, Structural, Fracture Toughened, Full Temperature Spectrum

U.S. Air Force, pre-sintering temperature

AIR FORCE QPL-25732-18 (3)-2006 PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT, LIMITED SERVICE AT 275 DEGREES F (135 DEGREES C)
AIR FORCE QPL-25732-18-2003 PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT, LIMITED SERVICE AT 275 DEGREES F (135 DEGREES C)

TR-TSE, pre-sintering temperature

TS 2249-1976 PLASTICS r DETERMINATION OF MELTING TEMPERATURE OF SEMI - CRYSTALLINE POLYMERS , OPTICAL METHOD

Institute of Interconnecting and Packaging Electronic Circuits (IPC), pre-sintering temperature

IPC TR-465-2-1993 Effect of Steam Aging Time and Temperature on Solderability Test Results

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, pre-sintering temperature

PREN 2833-2-1995 Aerospace Series Glass Fibre Thermosetting Preimpregnates Technical Specification Part 2: Glass Fabric/Epoxy Resin Preimpregnates Curing at up to 125 Degrees Celsius for Continuous Use up to 80 Degrees Celsius (Edition P 1)

HU-MSZT, pre-sintering temperature

MSZ 11707-1969