ZH
RU
ES

flexural modulus+

flexural modulus+, Total:479 items.

In the international standard classification, flexural modulus+ involves: Wood-based panels, Ground service and maintenance equipment, Mechanical testing, Footwear, Wood, sawlogs and sawn timber, Cellular materials, Plastics, Paper and board, Construction materials, Ceramics, Cork and cork products, Products of the chemical industry, Tyres, Fibre optic communications, Wood technology processes, Iron and steel products, Glass, Sports equipment and facilities, Reinforced plastics, Road engineering, Testing of metals, Materials for aerospace construction, Surface treatment and coating, Elements of buildings, Interface and interconnection equipment, Paper products, Rubber, Adhesives, Road vehicle systems, Semiconducting materials, Non-ferrous metals, Products of the textile industry, Waxes, bituminous materials and other petroleum products, Pipeline components and pipelines, Insulating materials, Soil quality. Pedology, Chipless working equipment, Raw materials for rubber and plastics.

RO-ASRO, flexural modulus+

STAS SR EN 310-1996 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
STAS 5855-1990 CHIPBOARDS AND WOOD FIBREBOARDS Strength and elasticity modulus deter- minatiou at slalic bending
STAS 337/2-1989 Wood DETERMINATIONOFMODULUS OF ELASTICITY IN STATIC BENDING
STAS 7168-1971 PLYWOOD Determination of the strength and moduls of elasticity bending

European Committee for Standardization (CEN), flexural modulus+

EN 310:1993 Wood-based panels; determination of modulus of elasticity in bending and of bending strength
prEN 310-1992 Wood-based panels; determination of modulus elasticity, in bending and bending strength
EN 1966:2009 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method

Danish Standards Foundation, flexural modulus+

DS/EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
DS/EN 310:1994 Wood-based panels - Determination of modulus of elasticity in bending and bending strength
DS/ISO 23486:2021 Metallic and other inorganic coatings – Measurement of Young's modulus of thermal barrier coatings at elevated temperature by flexural resonance method
DS/IEC/TR 62547:2013 Guidelines for the measurement of high-power damage sensitivity of single-mode fibre to bends - Guidance for interpretation of results
DS/EN 1170-5:1998 Precast concrete products - Test method for glass-fibre reinforced cement - Part 5: Measuring bending strength, ""Complete bending test"" method
DS/EN 1170-4:1998 Precast concrete products - Test method for glass-fibre reinforced cement - Part 4: Measuring bending strength, ""Simplified bending test"" method

British Standards Institution (BSI), flexural modulus+

BS EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
BS ISO 11093-7:2011 Paper and board. Testing of cores. Determination of flexural modulus by the three-point method
PD IEC TR 62221:2001 Optical fibres. Measurement methods. Microbending sensitivity
PD IEC/TR 62547:2013 Guidelines for the measurement of high-power damage sensitivity ofsinglemode fibre to bends. Guidance for the interpretation of results
BS 8530:2010 Traditional-style half round, beaded half round, Victorian ogee and moulded ogee aluminium rainwater systems - Specification
15/30300655 DC BS ISO 19477. Metallic and other inorganic coatings. Measurement of Young’s modulus of thermal barrier coatings by beam bending
BS ISO 11093-8:1998 Paper and board. Testing of cores. Determination of natural frequency and flexural modulus by experimental modal analysis
BS ISO 11093-8:2012 Paper and board. Testing of cores. Determination of natural frequency and flexural modulus by experimental modal analysis
BS ISO 11093-8:2017 Paper and board. Testing of cores. Determination of natural frequency and flexural modulus by experimental modal analysis
20/30382553 DC BS ISO 23486. Metallic and other inorganic coatings. Measurement of Young’s modulus of thermal barrier coatings at elevated temperature by flexural resonance method
BS ISO 23486:2021 Metallic and other inorganic coatings. Measurement of Young's modulus of thermal barrier coatings at elevated temperature by flexural resonance method
BS 2782-3 Method 323G:1997 Methods of testing plastics. Mechanical properties. Complex shear viscosity using a parallel-plate oscillatory rheometer
PD IEC TR 62245:2002 Optical fibres. Measurement methods. Bend loss for A3 and A4 type fibres
BS ISO 4152:2021 Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the apparent axial long-term modulus of pipes subject to beam bending
BS EN 60793-1-47:2002 Optical fibres - Measurement methods and test procedures - Macrobending loss
BS EN 60793-1-47:2009 Optical fibres - Measurement methods and test procedures - Macrobending loss
20/30409883 DC BS ISO 4152. Glass‐reinforced thermosetting plastics (GRP) pipes. Determination of the apparent axial long‐term modulus of pipes subject to beam bending
BS ISO 10619-3:2011 Rubber and plastics hoses and tubing. Measurement of flexibility and stiffness. Bending tests at high and low temperatures
BS EN ISO 10619-1:2011 Rubber and plastics hoses and tubing. Measurement of flexibility and stiffness. Bending tests at ambient temperature
BS IEC 62899-501-1:2019 Printed electronics - Quality assessment. Failure modes and mechanical testing. Flexible or bendable primary or secondary cells

German Institute for Standardization, flexural modulus+

DIN EN 310:1993 Wood-based panels; determination of modulus of elasticity in bending and of bending strength; German version EN 310:1993
DIN EN 310:1993-08 Wood-based panels; determination of modulus of elasticity in bending and of bending strength; German version EN 310:1993
DIN ISO 6267:1980 Alpine skis; measurement of bending vibrations
DIN ISO 11093-7:2012-10 Paper and board - Testing of cores - Part 7: Determination of flexural modulus by the three-point method (ISO 11093-7:2011)
DIN ISO 6267:1980-09 Alpine skis; measurement of bending vibrations
DIN 53121:1996 Testing of paper and board - Determination of the bending stiffness by the beam method
DIN ISO 11093-8:2018 Paper and board - Testing of cores - Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis (ISO 11093-8:2017)
DIN EN 1170-5:1998-01 Precast concrete products - Test method for glass-fibre reinforced cement - Part 5: Measuring bending strength; "complete bending test" method; German version EN 1170-5:1997
DIN EN 1170-4:1998-01 Precast concrete products - Test method for glass-fibre reinforced cement - Part 4: Measuring bending strength; "simplified bending test" method; German version EN 1170-4:1997
DIN ISO 11093-8:2013 Paper and board - Testing of cores - Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis (ISO 11093-8:2012 + Cor. 1:2012)
DIN ISO 11093-8:2016 Paper and board - Testing of cores - Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis (ISO 11093-8:2012 + Cor. 1:2012)

Lithuanian Standards Office , flexural modulus+

LST EN 310-1999 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
LST EN 1170-5-2003 Precast concrete products - Test method for glass-fibre reinforced cement - Part 5: Measuring bending strength, "Complete bending test" method
LST EN 1170-4-2000 Precast concrete products - Test method for glass-fibre reinforced cement - Part 4: Measuring bending strength, "Simplified bending test" method

Indonesia Standards, flexural modulus+

SNI ISO 16978:2010 Wood-based panels - Determination of modulus elasticity in bending and of bending strength

AENOR, flexural modulus+

UNE-EN 310:1994 WOOD-BASED PANELS. DETERMINATION OF MODULUS OF ELASTICITY IN BENDING AND OF BENDING STRENGTH.
UNE-ISO 1209-2:2011 Rigid cellular plastics. Determination of flexural properties. Part 2: Determination on flexural strength and apparent flexural modulus of elasticity
UNE 43713:1980 FLEXURE TESTING OF FLAT GLASS. DETERMINATION OF MODULUS OF RUPTURE

Association Francaise de Normalisation, flexural modulus+

NF EN 310:1993 Panneaux à base de bois - Détermination du module d'élasticité en flexion et de la résistance à la flexion
NF B51-124*NF EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength.
NF EN 14771:2012 Bitumes et liants bitumineux - Détermination du module de rigidité en flexion - Rhéomètre à flexion de barreau (BBR)
NF B57-041:1974 Expanded pure agglomerated cork. Determination of the modulus of rupture by bending.
NF S52-710*NF ISO 6267:1994 Alpine skis. Measurement of bending vibrations.
NF A91-054*NF ISO 19477:2016 Metallic and other inorganic coatings - Measurement of Young's modulus of thermal barrier coatings by beam bending
NF ISO 19477:2016 Revêtements métalliques et autres revêtements inorganiques - Mesurage du module de Young des revêtements barrières thermiques par flexion de poutre
NF ISO 6267:1994 Skis alpins - Mesurage des vibrations en flexion.
NF EN 993-6:2018 Méthodes d'essai pour produits réfractaires façonnés (denses) - Partie 6 : détermination du module de rupture par flexion à température ambiante
NF P98-260-2:1992 Test relating to pavements. Measurement of rheological properties on bituminous mixes. Part 2 : determination of the dynamic bending modulus.

未注明发布机构, flexural modulus+

BS EN 310:1993(1999) Wood - based panels — Determination of modulus of elasticity in bending and of bending strength
BS 6319-3:1990(2011) Testing of resin and polymer / cement compositions for use in construction — Part 3 : Methods for measurement of modulus of elasticity in flexure and flexural strength

Professional Standard - Aviation, flexural modulus+

HB 4369-1989 Curved die block
HB 4343-1989 Curved female frame
HB 1981-1975 Typical combination of bending die without guide post
HB 1980-1975 Typical combination of bending die without guide post
HB 1978-1975 Typical Combination of Bending Die for Rear Guide Pillar
HB 1979-1975 Typical Combination of Bending Die for Symmetrical Guide Post

GM North America, flexural modulus+

GMP.EEBC+PBT.006-2002 Copolyester Elastomer - 300 MPa Flexural Modulus Revision B
GM GMP.PA66.085-2002 Flexible Nylon 66 600 Flexural Modulus
GM GMP.E/P.039-2003 Polyolefin Alloy 700 MPa Flexural Modulus
GM GMP.E/P.049-1992 Polyolefin Alloy - 375 MPa Flexural Modulus
GM GMP.E/P.074-1996 Polyolefin Alloy - 800 MPa Flexural Modulus
GMP.E/P.039-2003 Polyolefin Alloy - 700 MPa Flexural Modulus Revision B
GM GMP.EEBC+ PBT.002-1993 Copolyester Elastomer - 700 MPa Flexural Modulus
GM GMP.E/P.064R-1994 Polyolefin Alloy - Recycled, 550 MPa Flexural Modulus
GMP.PUR.041-1999 Polyurethane RRIM - High Heat, 20% MICA, 1320 MPa Flexural Modulus
GMP.PUR.018-1995 Polyurethane RRIM - 20% Glass Fiber, 700 MPa Flexural Modulus Revision A
GM GMP.PU.019-1991 Polyurea RRIM - 15% Flake Glass, 875 MPa Flexural Modulus
GM GMP.E/P.069-1994 Polyolefin Alloy - Weather Resistant, 925 MPa Flexural Modulus
GM GMP.E/P.099-2003 Polyolefin Alloy 900 MPa Flexural Modulus, High Flow
GM GMP.E/P.048-1993 Polyolefin Alloy - 925 MPa Flexural Modulus, Injection Molding Grade, Black
GM GMP.E/P.089-2004 Polyolefin Alloy 20% Mineral Filled, 1950 MPa Flexural Modulus
GM GMP.E/P.125-2002 Polyolefin Alloy High Impact, 550 MPa Flexural Modulus
GM GMP.PU.021-1999 Polyurea RRIM - High Heat, 20% Calcium Silicate (9986021), 1625 MPA Flexural Modulus
GM GMP.E/P.041-1990 Polyolefin Alloy - 35% Mineral Filled, 700 MPa Flexural Modulus, Black
GM GMP.E/P.062-1996 Polyolefin Alloy - 15% Mineral Filled, 550 MPa Flexural Modulus, Low CLTE
GM GMP.E/P.063-1996 Polyolefin Alloy - 25% Mineral Filled, 1200 MPa Flexural Modulus, Low CLTE
GMP.EEBC.013-2002 Thermoplastic Polyester Elastomer - 49 Type D Hardness, 87 MPa Flexural Modulus
GM GMP.E/P.014-1992 Polyolefin Alloy - Weather Resistant, 18% Mineral Filled, 1200 MPa Flexural Modulus
GM GMP.E/P.045-1992 Polyolefin Alloy - Weather Resistant, 320 MPa Flexural Modulus, Extrusion Grade, Black
GM GMP.E/P.050-1995 Polyolefin Alloy - Weather Resistant, 15% Mineral Filled, 1200 MPa Flexural Modulus
GM GMP.E/P.056-1993 Polyolefin Alloy - Weather Resistant, 27% Mineral Filled, 1600 MPa Flexural Modulus
GM GMP.E/P.076-2004 Polyolefin Alloy - Weather Resistant, 20% Mineral Filled, 1950 MPa Flexural Modulus
GM GMP.PBTP+PETP.002-2001 PBTP+PETP - 40% Glass Fiber Reinforced/Mineral Filled, 6150 MPa Flexural Modulus
GM GMP.E/P.121-2003 Polyolefin Alloy 1300 MPa Flexural Modulus, 20% Mineral Filled, High Flow
GM GMP.E/P.032-1990 Polyolefin Alloy - 900 MPa Flexural Modulus, Interior UV Light Stabilized, Injection Molding Grade
GM GMP.E/P.051-1997 Polyolefin Alloy - Weatherable, 15% Mineral Filled, 550 MPa Flexural Modulus, Low CLTE
GM GMP.E/P.047-1993 Polyolefin Alloy - Weather Resistant, 8% Maximum Glass/Mineral Filled, 575 MPa Flexural Modulus
GMP.EEBC.019-2005 Thermoplastic Elastomer - Poly(ether ester) Block Copolymer, Shore D 49, 250 MPa Flexural Modulus
GM GMP.E/P.030-1991 Polyolefin Alloy - Blow Molding Grade, 85 MPa Flexural Modulus, Integrally Colored, UV Light Stable
GM GMP.E/P.068-1996 Polyefin Alloy - Weatherable, 25% Glass and Mineral Filled, 1200 MPa Flexural Modulus, Low CLTE
GM GMP.E/P.023-2012 Poluolefin Alloy - 550 MPa Flexural Modulus (Issue 2; Do Not Use on New Programs; No Replacement)
GM GMP.E/P.059-2012 Polyolefin Alloy - 320 MPa Flexural Modulus (Issue 2; Do Not Use on New Programs; Replaced by GMW16622)
GM GMP.PBTP+PETP.003-1998 PBTP+PETP - 40% Glass Fiber Reinforced/Mineral Filled, 9600 MPa Flexural Modulus Replaced by GMP.PBT+PET.003
GMP.PA66.085-2011 Flexible Nylon 66 ?600 Flexural Modulus Issue 2; Do Not Use on New Programs; No Replacement
GMP.E/P.039-2011 Polyolefin Alloy ?700 MPa Flexural Modulus Issue 4; Do Not Use on New Programs; No Replacement
GMP.E/P.074-2011 Polyolefin Alloy ?800 MPa Flexural Modulus Issue 2; Do Not Use on New Programs; No Replacement
GM GMP.E/MA.016-2003 E/MA-Ionomer - UV Stabilized, 4% Glass Fiber Filled, 900 MPa Flexural Modulus, Injection Molded
GMP.E/P.152-2011 Polyolefin Alloy ?2500 MPa Flexural Modulus Issue 2; Do Not Use on New Programs; Replaced by GMW15740
GMP.TES.014-2005 Thermoplastic Elastomer - Styrene Block Copolymer, Shore D34, 240 MPa Flexural Modulus, Interior, Integrally Colored Revision B
GMP.E/P.064R-2011 Polyolefin Alloy ?Recycled, 550 MPa Flexural Modulus Issue 2; Do Not Use on New Programs; No Replacement
GMP.E/P.069-2011 Polyolefin Alloy ?Weather Resistant, 925 MPa Flexural Modulus Issue 2; Do Not Use on New Programs; No Replacement
GM GMP.E/P.020-2012 Polyolefin Alloy - 15% Mineral Filled, 1200 MPa Flexural Modulus (Issue 3; Do Not Use on New Programs; No Replacement)
GM GMN7305-2003 Thermoplastic Elastomer - Styrene Block Copolymer, Shore D40, 160 MPa Flexural Modulus, Interior, Integrally Colored
GM GMP.TES.012-2003 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A89, 100 MPa Flexural Modulus, Interior, Integrally Colored
GM GMP.TES.014-2003 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A93, 240 MPa Flexural Modulus, Interior, Integrally Colored
GMP.E/P.149-2011 Polyolefin Alloy ?Weather Resistant, 2500 MPa Flexural Modulus Issue 2; Do Not Use on New Programs; Replaced by GMW15739
GM GMP.E/P.087-2012 Polyolefin Alloy - Weather Resistant, 275 MPa Flexural Modulus, Injection Molding Grade (Issue 2; Do Not Use on New Programs; Replaced by GMW16490)
GMP.E/P.099-2011 Polyolefin Alloy ?900 MPa Flexural Modulus, High Flow Issue 2; Do Not Use on New Programs; No Replacement
GMP.E/P.133-2011 Polyolefin Alloy ?1000 MPa Flexural Modulus, High Flow Issue 2; Do Not Use on New Programs; Replaced by GMW15185
GMP.E/P.048-2011 Polyolefin Alloy ?925 MPa Flexural Modulus, Injection Molding Grade, Black Issue 3; Do Not Use on New Programs; No Replacement
GM GMP.E/P.023-1992 Polyolefin Alloy - 550 MPa Flexural Modulus
GM GMP.E/P.059-1993 Polyolefin Alloy - 320 MPa Flexural Modulus
GM GMP.EEBC+ PBT.001-1992 Copolyester Elastomer - 700 MPa Flexural Modulus
GM GMP.EEBC+PBT.002-2002 Copolyester Elastomer - 850 MPa Flexural Modulus
GM GMP.E/P.026-2012 Polyolefin Alloy - 8% Maximum Glass/Mineral Filled, 575 MPa Flexural Modulus (Issue 2; Do Not Use on New Programs; No Replacement)
GM GMP.EEBC.004-2013 Thermoplastic Polyester Elastomer 47 Type D Hardness, 90 MPa Flexural Modulus (Issue 2; Do Not Use on New Programs; No Replacement)
GM GMP.EEBC.015-2013 Thermoplastic Polyester Elastomer - 55 Type D Hardness, 400 MPa Flexural Modulus (Issue 3; Do Not Use on New Programs; No Replacement)
GM GMP.PBT+PET.003-2014 PBT+PET - 40% Glass Fiber Reinforced/Mineral Filled, 9200 MPa Flexural Modulus (Issue 2; Do Not Use on New Programs; No Replacement)
GMP.E/P.089-2011 Polyolefin Alloy ?20% Mineral Filled, 1950 MPa Flexural Modulus Issue 2; Do Not Use on New Programs; Replaced by GMW16336
GM GMN7302-2001 Copolyester Elastomer - 200MPa Flexural Modulus
GM GMP.E/P.025-1994 Polyolefin Alloy - Weather Resistant, 700 MPa Flexural Modulus
GM GMP.EEBC+PBT.006-2002 Copolyester Elastomer - 300 MPa Flexural Modulus
GM GMP.E/P.019-1993 Polyolefin Alloy - 26% Mineral Reinforced, 1550 MPa Flexural Modulus Do Not Use on New Drawings; Scheduled for Deletion Replaced by GMP.E/P.013
GM GMP.E/P.021-1993 Polyolefin Alloy - 28% Mineral Filled, 1600 MPa Flexural Modulus Do Not Use on New Drawings; Scheduled for Deletion Replaced by GMP.E/P.013
GMP.E/P.050-2011 Polyolefin Alloy ?Weather Resistant, 15% Mineral Filled, 1200 MPa Flexural Modulus Issue 3; Do Not Use on New Programs; No Replacement
GMP.E/P.056-2011 Polyolefin Alloy ?Weather Resistant, 27% Mineral Filled, 1600 MPa Flexural Modulus Issue 2; Do Not Use on New Programs; No Replacement
GMP.E/P.062-2011 Polyolefin Alloy ?15% Mineral Filled, 550 MPa Flexural Modulus, Low CLTE Issue 4; Do Not Use on New Programs; No Replacement
GMP.E/P.063-2011 Polyolefin Alloy ?25% Mineral Filled, 1200 MPa Flexural Modulus, Low CLTE Issue 3; Do Not Use on New Programs; No Replacement
GMP.E/P.076-2011 Polyolefin Alloy ?Weather Resistant, 20% Mineral Filled, 1950 MPa Flexural Modulus Issue 2; Do Not Use on New Programs; No Replacement
GM GMP.E/P.028-2003 Polyolefin Alloy Weather Resistant, 550 MPa Flexural Modulus

AT-ON, flexural modulus+

ONORM EN 310-1993 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
ONORM S 4025-1978 Alpine ski; bending vibrations; measurement method
ONORM M 3124 Teil.1-1973 Sheet (sheet and strip) of soft unalloyed steel; Drawing quality; Quality Specifications.

CZ-CSN, flexural modulus+

CSN 49 0116-1976 Sawn timbor Testing ní' iikkIuIus of elasticity in bending
CSN 49 0116-1980 Wood. Determination of the modulus of elasticity in static bending
CSN 49 0131-1982 Sawn timber. Determination of modulus of elasticity in static bending
CSN 64 0614-1981 Testing of plnstios. Determination f modulus of elasticity from tensile, ompresion and flexural tests
CSN ISO 6267:1993 Alpine skis. Measurement of bending vibrations

ZA-SANS, flexural modulus+

SANS 6112:1988 Bending modulus of steel shanks for footwear
SANS 6083:2004 Modulus of elasticity and modulus of rupture in static bending of solid timber and glued laminated timber in structural sizes
SANS 6015:2004 Modulus of elasticity and modulus of rupture in static bending of fibreboards

Professional Standard - Aerospace, flexural modulus+

QJ 773.30-1983 Small Combination Die Bending Bending Punch
QJ 2533.4-1993 Small Combination Bending Die Components Bending Die
QJ 773.32-1983 Small Combination Die Bending Die
QJ 2533.11-1993 Small Combined Bending Die Component C Type Bending Punch
QJ 2533.10-1993 Small Combined Bending Die Components Type B Bending Punch
QJ 2533.9-1993 Small Combined Bending Die Component A Type Bending Punch
QJ 2532.4-1993 Small combined bending die element length 1020mm bending upper die base
QJ 2532.5-1993 680mm long bending upper die base for small combined bending die elements
QJ 2532.6-1993 Small combined bending die element length 340mm bending upper die base
QJ 2531.3-1993 Lower die for large combined bending die components
QJ 2532.10-1993 Die shank for small combined bending die components
QJ 2312.2-1992 Universal trough bending die (L≤220mm) punch
QJ 2312.3-1992 Universal trough bending die (L≤220mm) handle
QJ 2312.4-1992 Universal trough bending die (L≤220mm) die
QJ 2315.2-1992 Universal trough bending die (L≤1200mm) punch
QJ 2315.4-1992 Universal trough bending die (L≤2000mm) die
QJ 2313.2-1992 Universal trough bending die (L≤600mm) punch
QJ 2313.4-1992 Universal trough bending die (L≤600mm) die
QJ 2314.2-1992 Universal trough bending die (L≤1200mm) punch
QJ 2314.4-1992 Universal trough bending die (L≤1200mm) die
QJ 773.36-1983 Small Combination Die R Bending Punch
QJ 773.37-1983 Small Combination Die R Bending Die
QJ 2314-1992 Universal trough bending die (L≤1200mm)
QJ 2312-1992 Universal trough bending die (L≤220mm)
QJ 2313-1992 Universal trough bending die (L≤660mm)
QJ 2315-1992 Universal trough bending die (L≤2000mm)
QJ 773.38-1983 Adjustable Bending Die for Small Combined Die
QJ 2312.1-1992 Universal trough bending die (L≤220mm) lower die base
QJ 773.39-1983 Adjustable Bending Punch with Small Combined Die
QJ 2315.1-1992 Universal trough bending die (L≤2000mm) lower die base
QJ 2315.3-1992 Universal trough bending die (L≤2000mm) upper die base
QJ 2313.1-1992 Universal trough bending die (L≤600mm) lower die base
QJ 2313.3-1992 Universal trough bending die (L≤600mm) upper die base
QJ 2314.1-1992 Universal trough bending die (L≤1200mm) lower die base
QJ 2314.3-1992 Universal trough bending die (L≤1200mm) upper die base
QJ 773.35-1983 Small Combination Die Small R Bending Punch
QJ 773.31-1983 Small Combination Die Straight Bending Punch
QJ 773.33-1983 Combination of small combined die and bending punch
QJ 773.34-1983 Combination of small combined punching die and bending die
QJ 777.16-1983 Small combination die bending gasket
QJ 773.40-1983 Small Combination Die Bending Platen
QJ 773.52-1983 Small Combination Die Bending Mandrel
QJ 2312.9-1992 General groove bending die (L≤220mm) key
QJ 749-1982 Typical combination of bending die without guide post
QJ 750-1982 Typical combination of bending die without guide post
QJ 2531.1-1993 Type A Upper Die of Large Combination Bending Die Components
QJ 2531.2-1993 B-type upper mold of large combined bending mold element
QJ 2533.3-1993 Die inserts for small combined bending die elements
QJ 2533.5-1993 Small Combined Bending Die Component A Type Punch
QJ 2533.6-1993 Small Combined Bending Die Components Type B Punch
QJ 2533.7-1993 Small Combined Bending Die Component C-Type Punch
QJ 2533.8-1993 Combination of small combined bending die components punching board
QJ 2532.1-1993 The upper die base of the small combined bending die element is 1020mm long
QJ 2532.2-1993 680mm long upper die base for small combined bending die elements
QJ 2532.3-1993 Small combination bending die element length 340mm upper die base
QJ 2532.7-1993 Small combined bending die element length 1020mm lower die base
QJ 2532.8-1993 680mm long lower die base for small combined bending die elements
QJ 2532.9-1993 Small combined bending die element length 340mm lower die base
QJ 2534.1-1993 Small combination bending die element punch fixed plate
QJ 2529.1-1993 Flat key of large combined bending die element
QJ 2315.6-1992 Universal trough bending die (L≤2000mm) ejector
QJ 2530.2-1993 Large combined bending die element connecting plate
QJ 2530.3-1993 Ejector rod of large combined bending die element
QJ 2316-1992 Specifications for General Slot Bending Dies
QJ 2312.10-1992 Universal trough bending die (L≤220mm) pieces
QJ 2313.6-1992 Universal trough bending die (L≤600mm) ejector pin
QJ 2314.6-1992 Universal trough bending die (L≤1200mm) ejector
QJ 2530.1-1993 Large Combination Bending Die Element Screws
QJ 2534.5-1993 Backing plate for small combined bending die element
QJ 2535.2-1993 Small combined bending die element block
QJ 2536.1-1993 Ejector rod of small combined bending die element
QJ 2529.5-1993 Large combined bending die element pressing block
QJ 2534.3-1993 Press plate of A-type punch for small combined bending die element
QJ 2534.4-1993 B-type punch press plate for small combined bending die components
QJ 2529.3-1993 Inclined Pad Blocks for Large Combination Bending Die Elements
QJ 2315.5-1992 Universal trough bending die (L≤2000mm) top block
QJ 2315.7-1992 Universal trough bending die (L≤2000mm) positioning plate
QJ 2313.5-1992 Universal trough bending die (L≤600mm) top block
QJ 2313.7-1992 Universal trough bending die (L≤600mm) positioning plate
QJ 2314.5-1992 Universal trough bending die (L≤1200mm) top block
QJ 2314.7-1992 Universal slot bending die (L≤1200mm) positioning plate
QJ 2528.18-1993 Large combined bending die element thick backing plate
QJ 2312.5-1992 Universal trough bending die (L≤220mm) top block
QJ 2528.20-1993 Thin backing plate for large combined bending die components
QJ 2534.2-1993 Binder plate for small combined bending die components
QJ 2535.1-1993 Component Locator for Small Combined Bending Die
QJ 2536.2-1993 Small combined bending die element top piece block
QJ 2533.1-1993 Fixed Block of A-type Die Die for Small Combination Bending Die Components
QJ 2533.2-1993 B-type concave die fixing block of small combined bending die element
QJ 2529.2-1993 Adjustable leveling key for large combined bending die elements
QJ 2531.4-1993 A-shaped top plate of large combined bending mold element
QJ 2531.5-1993 B-type top plate of large combined bending die element
QJ 2496-1993 Technical conditions for large combined bending die components
QJ 2528.19-1993 Medium-thick backing plate for large combined bending die components
QJ 2312.6-1992 Universal trough bending die (L≤220mm) unloading screw
QJ 2312.7-1992 Universal trough bending die (L≤220mm) left positioning plate
QJ 2312.8-1992 Universal trough bending die (L≤220mm) right positioning plate
QJ 2536.3-1993 Small Combined Bending Die Components Forming Rubber
QJ 2537-1993 Technical conditions for small combined bending die components
QJ 2529.6-1993 Large combined bending die element A-type angle iron
QJ 2529.7-1993 B-type angle iron of large combined bending die element
QJ 2529.4-1993 Large-scale combined bending die element double-hole inclined pad
QJ 2528.8-1993 Short support backing plate for large combined bending die components
QJ 2528.16-1993 Rectangular Support of Large Combination Bending Die Components
QJ 2528.17-1993 Long support backing plate for large combined bending die element
QJ 2529.8-1993 A-type positioning plate for large combined bending die components
QJ 2529.9-1993 B-type positioning plate for large combined bending die components
QJ 2528.3-1993 Square short support for large combined bending die element
QJ 2527.4-1993 D-shaped lower groove base part of large combined bending die element
QJ 2527.5-1993 E-type lower groove base part of large combined bending die element
QJ 2527.7-1993 B-type upper groove base part of large combined bending die element
QJ 2527.8-1993 C-type upper groove base part of large combined bending die element
QJ 2527.9-1993 D-type upper groove base part of large combined bending die element
QJ 2527.10-1993 Large-scale combined bending die element E-shaped upper groove basic part
QJ 2528.1-1993 A-type rectangular short support for large combined bending die element
QJ 2528.2-1993 B-type rectangular short support for large combined bending die element
QJ 2528.4-1993 C-type rectangular short support for large combined bending die element
QJ 2528.5-1993 D-type rectangular short support for large combined bending die element
QJ 2528.6-1993 E-type Rectangular Short Support for Large Combined Bending Die Components
QJ 2528.7-1993 F-Type Rectangular Short Support for Large Combination Bending Die Components
QJ 2528.9-1993 A-type rectangular long support of large combined bending die element
QJ 2528.10-1993 B-type rectangular long support of large combined bending die element
QJ 2528.11-1993 C-type rectangular long support of large combined bending die element
QJ 2528.12-1993 D-type rectangular long support of large combined bending die element
QJ 2528.13-1993 E-type rectangular long support for large combined bending die element
QJ 2528.14-1993 F-Type Rectangular Long Support of Large Combination Bending Die Components
QJ 2528.15-1993 G-Type Rectangular Long Support of Large Combination Bending Die Components
QJ 2527.1-1993 Type A Lower Groove Basic Parts of Large Combination Bending Die Elements
QJ 2527.2-1993 B-type lower groove base part of large combined bending die element
QJ 2527.3-1993 C-shaped lower groove base part of large combined bending die element
QJ 2527.6-1993 Type A Upper Groove Basic Parts of Large Combination Bending Die Elements

BE-NBN, flexural modulus+

NBN-EN 310-1994
NBN-ISO 2077:1992 Pure expanded corkboard. Determination of the modulus of rupture by bending
NBN T 41-002-1977 Glass reinforced plastics - Determination of flexural properties - Three point method

International Organization for Standardization (ISO), flexural modulus+

ISO 1209-2:2004 Rigid cellular plastics - Determination of flexural properties - Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
ISO/TR 4137:1978 Plastics; Determination of modulus of elasticity by alternating flexure
ISO 2077:1979/Amd 1:1980 Pure expanded corkboard; determination of the modulus of rupture by bending
ISO 2077:1979 Pure expanded corkboard; determination of the modulus of rupture by bending
ISO 1209-2:2007 Rigid cellular plastics - Determination of flexural properties - Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
ISO 6721:1983 Plastics; Determination of damping properties and complex modulus by bending vibration
ISO 6267:1980 Alpine skis; Measurement of bending vibrations
ISO 19477:2016 Metallic and other inorganic coatings - Measurement of Young's modulus of thermal barrier coatings by beam bending
ISO 23486:2021 Metallic and other inorganic coatings - Measurement of Young's modulus of thermal barrier coatings at elevated temperature by flexural resonance method
ISO 11093-8:2012 Paper and board - Testing of cores - Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis
ISO 11093-8:2017 Paper and board - Testing of cores - Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis
ISO 16978:2003 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
ISO 3349:1975 Wood; Determination of modulus of elasticity in static bending
ISO 4152:2021 Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent axial long-term modulus of pipes subject to beam bending
ISO 11093-8:2012/cor 1:2013 Paper and board - Testing of cores - Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis; Technical Corrigendum 1

Korean Agency for Technology and Standards (KATS), flexural modulus+

KS M ISO 1209-2-2012(2022) Rigid cellular plastics－Determination of flexural properties－Part 2：Determination of flexural strength and apparent flexural modulus of elasticity
KS M ISO 2077:2004 Pure expanded corkboard－Determination of the modulus of rupture by bending
KS M ISO 2077:2008 Pure expanded corkboard－Determination of the modulus of rupture by bending
KS M ISO 1209-2-2012(2017) Rigid cellular plastics－Determination of flexural properties－Part 2：Determination of flexural strength and apparent flexural modulus of elasticity
KS L 1591-1994 Testing method for flexural strength(modulus of rupture) of high performance ceramics
KS F 2208-2004 Method of bending test for wood
KS M ISO 11093-7:2020 Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method
KS M ISO 11093-7:2014 Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method
KS G ISO 6267:2004 Alpine skis－Measurement of bending vibrations
KS G ISO 6267-2004(2019) Alpine skis－Measurement of bending vibrations
KS M ISO 11093-8:2020 Paper and board — Testing of cores —Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis
KS M ISO 11093-8:2014 Paper and board — Testing of cores — Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis
KS F 2150-2004 Method of static bending test for full sized structural lumber
KS M ISO 14679-2007(2017) Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS M ISO 14679-2007(2022) Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS M ISO 11093-7:2008 Paper and board-Testing of cores-Part 7:Determination of flexural modulus by the three-point method
KS D 0259-2012(2022) Methods of measurement of thickness,thickness variation and bow for silicon wafer
KS M ISO 14679:2007 Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS M ISO 11093-8:2008 Paper and board-Testing of cores-Part 8:Determination of natural frequency and flexural modulus by experimental modal analysis
KS M 3819-2011 Plastics－Determination of resistance to environmental stress cracking(ESC)－Bent strip method

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, flexural modulus+

GB/T 8812.2-2007 Rigid cellular plastics.Determination of flexural properties.Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
GB/T 10700-2006 Test methods for elastic moduli of fine ceramics (advanced ceramics,advanced technical ceramics).Bending method
GB/T 29895-2013 Standard test methods for nondestructive evaluation of wood-based flexural members using transverse vibration
GB/T 5985-2003 Test method for specific flexivity constant of ther mostat metals
GB/T 9771.7-2022 Single-mode optical fibres for telecommunication—Part 7: Characteristics of a bending loss insensitive single-mode optical fibre
GB/T 9771.7-2012 Single-mode optical fibres for telecommunication.Part 7:Characteristics of a bending loss insensitive single-mode optical fibre for the access network
GB/T 1936.2-1991 Method for determination of the modulus of elasticity in static bending of wood
GB/T 1936.2-2009 Method for determination of the modulus of elasticity in static bending of wood

Professional Standard - Electron, flexural modulus+

SJ 3009.6-1988 Combined dies--Bending point
SJ 3008.1-1988 Combined dies--90°bending point
SJ 3008.2-1988 Combined dies--Special 90°bending point
SJ 3008.4-1988 Combined dies--90°bending point
SJ 3008.5-1988 Combined dies--90°bending point
SJ 2995.1-1988 Combined dies--Holder of bending cutting edge
SJ 2995.2-1988 Combined dies--Holder of bending cutting edge
SJ 3009.1-1988 Combined dies--R bend point
SJ 3009.2-1988 Combined dies--R bend point
SJ 3009.5-1988 Combined dies--Upper bending point
SJ 3008.6-1988 Combined dies--90°bending point
SJ 3039.2-1988 Combined dies--Holder of bend point
SJ 3039.3-1988 Combined dies--90°bending point
SJ 3008.3-1988 Combined dies--90°bending point
SJ 3009.3-1988 Combined dies--Π-form bend point
SJ 3009.4-1988 Combined dies--П-form bend point
SJ 3039.1-1988 Combined dies--Compounds of special 90°bending point
SJ/T 11847.3.1-2022 Flexible display devices Part 3-1: Detailed specifications for side-bending flexible display modules

American Society for Testing and Materials (ASTM), flexural modulus+

ASTM C120-06e1 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
ASTM C120-06 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
ASTM C120/C120M-09 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
ASTM C1352-96(2002) Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM C1352-96 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM C1352-96(2008) Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM C1352/C1352M-09 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM C1352/C1352M-21 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM C1352/C1352M-15 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM C1025-91(2005) Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite
ASTM C1025-15(2020) Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite
ASTM C1025-91(2010)e1 Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite
ASTM D5023-01 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM C158-95 Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM C158-95(2000) Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM C158-02 Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM D747-02 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
ASTM D747-08 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
ASTM F417-78(1996) Test Method for Flexural Strength (Modulus of Rupture) of Electronic-Grade Ceramics (Withdrawn 2001)
ASTM D747-10 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
ASTM C120/C120M-15 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
ASTM C120-00 Standard Test Methods of Flexure Testing of Slate (Modulus of Rupture, Modulus of Elasticity)
ASTM D8069-17a Standard Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross Sections under Bending
ASTM D8069-17 Standard Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross Sections under Bending
ASTM F394-78(1996) Test Method for Biaxial Flexure Strength (Modulus of Rupture) of Ceramic Substrates (Withdrawn 2001)
ASTM D4695-96 Standard Guide for General Pavement Deflection Measurements
ASTM D4695-03 Standard Guide for General Pavement Deflection Measurements
ASTM D4695-03(2008) Standard Guide for General Pavement Deflection Measurements
ASTM C120/C120M-12 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
ASTM C120-05 Standard Test Methods of Flexure Testing of Slate (Modulus of Rupture, Modulus of Elasticity)
ASTM D7811-13(2022) Standard Test Method for Bow and Skew Using a Measuring Tool
ASTM E2769-13 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2769-15 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2769-16 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM D8295-19 Standard Test Method for Determination of Shear Wave Velocity and Initial Shear Modulus in Soil Specimens using Bender Elements
ASTM E2769-18 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM C1072-06 Standard Test Method for Measurement of Masonry Flexural Bond Strength
ASTM E2769-22 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2769-11 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM D5934-96 Standard Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending

YU-JUS, flexural modulus+

JUS D.C8.108-1983 Testing ofparticle boards. Determination modu/us ofelasticity in bending
JUS D.Z8.046-1990 Cork. Pure expanded corkboard. Determination of the modulus of rupture by bending
JUS D.A1.035-1979 Testingofwood. Determination ofmodulus ofelasticitv in static ben?ing
JUS U.J6.236-1983 Testing of plastics and damped laminated systems.Bending vibration test;determination of complex modulus of elasticity

Professional Standard - Machinery, flexural modulus+

JB/T 6544-1993 Drawing and bending elastic modulus of plastics - Test method

KR-KS, flexural modulus+

KS M ISO 2077-2004 Pure expanded corkboard－Determination of the modulus of rupture by bending
KS M ISO 11093-7-2020 Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method
KS M ISO 11093-8-2020 Paper and board — Testing of cores —Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis

ES-AENOR, flexural modulus+

Standard Association of Australia （SAA）, flexural modulus+

AS/NZS 4266.5(Int):2001 Reconstituted wood-based panels - Methods of test - Modulus of elasticity in bending and bending strength
AS/NZS 4266.5/AMD 1:2006 Amendment No.1 to AS/NZS 4266.5-2004 Reconstituted wood-based panels--Methods of test Part 5: Modulus of elasticity in bending and bending strength
AS 1774.31.1:2000(R2013)

Japanese Industrial Standards Committee (JISC), flexural modulus+

JIS K 7221-2:2006 Rigid cellular plastics -- Determination of flexural properties -- Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
JIS H 0611:1994 Methods of measurement of thickness, thickness variation and bow for silicon wafer

PT-IPQ, flexural modulus+

NP EN 310-2002 Wood-based panels Determination of modulus of elasticity in bending and of bending strength
NP 49-1961

IN-BIS, flexural modulus+

GM Global, flexural modulus+

GMW 15187-2012 Polyolefin Alloy - 1700 MPa Flexural Modulus, High Flow Issue 2; English
GMW 15185-2013 Polyolefin Alloy - 1000 MPa Flexural Modulus, High Flow Issue 2; English
GMW 16826-2013 Polyolefin Alloy - 1700 MPa Flexural Modulus, High Flow, Low Density Issue 2; English
GMW 16827-2012 Polyolefin Alloy - 1700 MPa Flexural Modulus, Weather Resistant, High Flow, Low Density Issue 1; English

NZ-SNZ, flexural modulus+

AS/NZS 4266.5:2004 Reconstituted wood-based panels - Methods of test Method 5: Modulus of elasticity in bending and bending strength (Incorporating Amendment 1:02/03/2006)

Group Standards of the People's Republic of China, flexural modulus+

T/CRIA 29001-2022 Tire crown bending modal test method
T/SSEA 0069-2020 Measuring method of bending degree of bar
T/CMA YJ069-0201 Technical Requirements for Measurement of Steel Bar Bending Testing Machine
T/ZZB 041-2015 Characteristics of a bending loss insensitive single mode optical fiber B6.a2
T/ZZB 0181-2017 A bending loss insensitive a2 single mode optical fibre perform for the access network

工业和信息化部, flexural modulus+

YD/T 2964-2015 Measurement method for bend loss insensitive single-mode optical fiber for access network
YD/T 2965-2015 Bend loss insensitive multimode optical fiber characteristics
YD/T 1954-2022 Bend loss insensitive single-mode fiber characteristics
JC/T 2373-2016 Test methods for elastic modulus and flexural strength of glass pipes notched ring method

US-FCR, flexural modulus+

FCR COE HL-92-9 FINAL REPORT-1992 DEPTH-AVERAGED NUMERICAL MODELING FOR CURVED CHANNELS

机械工业部, flexural modulus+

JB/T 7642.5-1994 Die parts and their technical conditions. Universal mold base for punch molds. Lower mold base for bending molds.

PL-PKN, flexural modulus+

PN N97022-1992 Alpin skis. Measurement of bending vibrations

VN-TCVN, flexural modulus+

TCVN 7756-6-2007 Wood based panels.Test methods.Part 6: Determination of modulus of elasticity in bending and bending strength

Society of Automotive Engineers (SAE), flexural modulus+

SAE RS-210-1-1944 RS210 Bend Allowances for Fullscale Layout
SAE RS-208-1-1944 RS208 Bend Allowances for Fullscale Layout
SAE RS-209-1-1944 RS209 Bend Allowances for Fullscale Layout
SAE AMS6379A-1973 Bars, Die Drawn, 0.95Cr 0.29Mo 0.05Te (0.40-0.53C), Tempered, 165,000 psi Yield (Noncurrent: 01 Jul 1981) (Reaffirmed: 01 Apr 1994)
SAE J949-2003 Test Method for Determining Stiffness (Modulus of Bending) of Interior Trim Materials and Substrates
SAE J356-2006 Welded Flash-Controlled Low-Carbon Steel Tubing Normalized for Bending, Double Flaring, and Beading
SAE J356-2013 Welded Flash-Controlled Low-Carbon Steel Tubing Normalized for Bending, Double Flaring, and Beading
SAE J356-2019 Welded Flash-Controlled Low-Carbon Steel Tubing Normalized for Bending, Double Flaring, and Beading

RU-GOST R, flexural modulus+

GOST 9550-1981 Plastics. Methods for determination of elasticity modulus at strength, compression and bending
GOST 10828-1975 Rubber. Method for the determination of dynamic modulus and internal friction modulus under variable sing flexure with rotation
GOST 10635-1988 Particle boards. Methods for determinining of ultimate strength and modulus of elasticity in bendind
GOST 9900-2013 Glass and glass products. Methods for determination of mechanical properties. Determination of elasticity modulus at cross static bending
GOST 9625-1987 Laminated glued wood. Method for determination of strength and elasticity module in static bending
GOST 9625-2013 Laminated glued wood. Methods for determination of ultimate and modulus of elasticity in static bending
GOST 11412-1975 Blacksmith's hand and hammer tools. Bottom swages for bending. Design. And dimensions

Taiwan Provincial Standard of the People's Republic of China, flexural modulus+

CNS 12701-1990 Method of Test for Flexural Strength ( Modulus of Rupture ) of High Performance Ceramics

GM Daewoo, flexural modulus+

GMKOREA EDS-T-7510-2006 TESTING OF PLASTICS DETERMINATION OF THE MODULUS OF ELASTICITY BY TENSILE, COMPRESSION AND FLEXURAL TEST (VERSION: 4)

International Telecommunication Union (ITU), flexural modulus+

ITU-T Q.136-1989 Loop Transmission Measurements - Specifications of Signalling Systems Nos. 4 and 5 (Study Group XI) 1 pp
ITU-T G.657 ARABIC-2006 Characteristics of a bending loss insensitive single mode optical fibre and cable for the access network
ITU-T G.657 CHINESE-2006 Characteristics of a bending loss insensitive single mode optical fibre and cable for the access network
ITU-T G.657 RUSSIAN-2006 Characteristics of a bending loss insensitive single mode optical fibre and cable for the access network
ITU-T G.657 SPANISH-2006 Characteristics of a bending loss insensitive single mode optical fibre and cable for the access network Caracter韘ticas de las fibras y cables 髉ticos monomodo insensibles a la p閞dida por flexi髇 para la red de acceso
ITU-T G.657 FRENCH-2006 Characteristics of a bending loss insensitive single mode optical fibre and cable for the access network Caracteristiques des cables et fibres optiques monomodes insensibles aux pertes par courbure pour les reseaux d'acces

Professional Standard - Light Industry, flexural modulus+

QB/T 2803-2006 Method for measuring bending degree of rigid plastic pipes

Professional Standard - Post and Telecommunication, flexural modulus+

YD/T 1954-2009 Characteristics of a Bending Loss Insensitive Signal Mode Optical Fiber for the Access Network
YD/T 1954-2013 Characteristics of bending loss insensitive single-mode fiber for access network

International Electrotechnical Commission (IEC), flexural modulus+

IEC TR 62547:2009 Guidelines for the measurement of high-power damage sensitivity of single-mode fibres to bends and guidance for interpretation of results
IEC TR 62547:2013 Guidelines for the measurement of high-power damage sensitivity of single-mode fibre to bends - Guidance for interpretation of results
IEC TR 62245:2002 Optical fibres - Measurement methods - Bend loss for A3 and A4 type fibres

CU-NC, flexural modulus+

NC 43-11-1968 Particle boards and fibre boards Determination of bending strength

HU-MSZT, flexural modulus+

MSZ 15444-1970

(U.S.) Ford Automotive Standards, flexural modulus+

FORD ESB-M2D348-A3-2004 POLYURETHANE ELASTOMER, REACTION INJECTION MOLDED (RIM) - HIGH FLEXURAL MODULUS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD FLTM BS 105-1-2000 DETERMINATION OF FLEXURAL STRENGTH AND THE ELASTICITY MODULUS
FORD FLTM BS 105-01-2000 DETERMINATION OF FLEXURAL STRENGTH AND THE ELASTICITY MODULUS

SAE - SAE International, flexural modulus+

SAE J949-1981 Test Method for Determining Stiffness (Modulus of Bending) of Fiberboards@ Standard (August 1981)
SAE J356-1996 Welded Flash-Controlled Low-Carbon Steel Tubing Normalized for Bending, Double Flaring, and Beading
SAE J356-1991 Welded Flash-Controlled Low-Carbon Steel Tubing Normalized for Bending, Double Flaring, and Beading
SAE J356-1980 Welded Flash Controlled Low Carbon Steel Tubing Normalized for Bending@ Double Flaring@ and Beading

NL-NEN, flexural modulus+

NEN-EN 310-1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength

The American Road & Transportation Builders Association, flexural modulus+

AASHTO TP 87-2010 Standard Method of Test for Measuring Low-Temperature Flexural Creep Stiffness of Bituminous Sealants and Fillers by Bending Beam Rheometer (BBR)

AASHTO - American Association of State Highway and Transportation Officials, flexural modulus+

T 368-2017 Standard Method of Test for Measuring Low-Temperature Flexural Creep Stiffness of Hot-Poured Asphalt Crack Sealant by Bending Beam Rheometer (BBR)
TP 87-2010 Standard Method of Test for Measuring Low-Temperature Flexural Creep Stiffness of Bituminous Sealants and Fillers by Bending Beam Rheometer (BBR)

TR-TSE, flexural modulus+

TS 2478-1976 WOOD - DETERMINATION OF MODULUS OF ELASTICITY IN STATIC BENDING

American National Standards Institute （ANSI), flexural modulus+

ANSI/ASTM D4473:2001 Measuring the Cure Behavior of Thermosetting Resins Using Dynamic Mechanical Properties (08.03)
ANSI/ASTM D5023:2001 Test Method for Measuring the Dynamic Mechanical Properties of Plastics Using Three Point Bending (08.03)
ANSI/ASTM D5934:1997 Test Method for Determination of the Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three Point Bending

ES-UNE, flexural modulus+

UNE-EN 1170-5:1998 Precast concrete products - Test method for glass-fibre reinforced cement - Part 5: Measuring bending strength, "Complete bending test" method
UNE-EN 1170-4:1998 Precast concrete products - Test method for glass-fibre reinforced cement - Part 4: Measuring bending strength, "Simplified bending test" method

WRC - Welding Research Council, flexural modulus+

BULLETIN 180-1973 ELASTIC-PLASTIC BENDING OF A CONSTRAINED CIRCULAR PERFORATED PLATE UNDER UNIFORM PRESSURE (TRIANGULAR PENETRATION PATTERN)

American Welding Society (AWS), flexural modulus+

WRC 180:1973 Elastic-Plastic Bending of a Constrained Circular Perforated Plate Under Uniform Pressure (Triangular Penetration Pattern)