ZH
RU
ES

What is the ignition point of plastic

What is the ignition point of plastic, Total:155 items.

In the international standard classification, What is the ignition point of plastic involves: Plastics, Protection against fire, Raw materials for rubber and plastics, Analytical chemistry, Fuels, Reinforced plastics, Pipeline components and pipelines, Installations in buildings.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, What is the ignition point of plastic

GB/T 9343-1988 Test method for flammability of plastics--Flash-ignition temperature and self-ignition temperature test
GB/T 4610-1984 Test for flammability of plastics--Ignition temperature test

American Society for Testing and Materials (ASTM), What is the ignition point of plastic

ASTM D1929-12 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM D1929-11 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM D1929-13 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM D1929-13a Standard Test Method for Determining Ignition Temperature of Plastics
ASTM D6296-98(2017) Standard Test Method for Total Olefins in Spark-ignition Engine Fuels by Multidimensional Gas Chromatography
ASTM D6296-22 Standard Test Method for Total Olefins in Spark-ignition Engine Fuels by Multidimensional Gas Chromatography
ASTM D6296-98(2008) Standard Test Method for Total Olefins in Spark-ignition Engine Fuels by Multidimensional Gas Chromatography
ASTM D6296-98(2003)e1 Standard Test Method for Total Olefins in Spark-Ignition Engine Fuels by Multi-dimensional Gas Chromatography
ASTM D6296-98 Standard Test Method for Total Olefins in Spark-Ignition Engine Fuels by Multi-dimensional Gas Chromatography
ASTM D6296-98(2013) Standard Test Method for Total Olefins in Spark-ignition Engine Fuels by Multidimensional Gas Chromatography
ASTM D7754-19 Standard Test Method for Determination of Trace Oxygenates in Automotive Spark-Ignition Engine Fuel by Multidimensional Gas Chromatography
ASTM D7754-11e1 Standard Test Method for Determination of Trace Oxygenates in Automotive Spark-Ignition Engine Fuel by Multidimensional Gas Chromatography
ASTM D7754-16 Standard Test Method for Determination of Trace Oxygenates in Automotive Spark-Ignition Engine Fuel by Multidimensional Gas Chromatography
ASTM D6839-21 Standard Test Method for Hydrocarbon Types, Oxygenated Compounds, and Benzene in Spark Ignition Engine Fuels by Gas Chromatography
ASTM D6839-21a Standard Test Method for Hydrocarbon Types, Oxygenated Compounds, Benzene, and Toluene in Spark Ignition Engine Fuels by Multidimensional Gas Chromatography

Professional Standard - Chemical Industry, What is the ignition point of plastic

HG/T 4670-2014 Determination of black speck and impurity in flame retardant for plastic modification

British Standards Institution (BSI), What is the ignition point of plastic

BS ISO 871:2006 Plastics - Determination of ignition temperature using a hot-air furnace
BS EN ISO 11403-1:1996 Plastics - Acquisition and presentation of comparable multipoint data - Mechanical properties
BS EN ISO 11403-1:2014 Plastics. Acquisition and presentation of comparable multipoint data. Mechanical properties
BS EN ISO 11403-1:2003 Plastics - Acquisition and presentation of comparable multipoint data - Mechanical properties
BS EN ISO 11403-3:2001 Plastics. Acquisition and presentation of comparable multipoint data. Environmental influences on properties
BS EN ISO 11403-3:2014 Plastics. Acquisition and presentation of comparable multipoint data. Environmental influences on properties
BS EN ISO 11403-2:1996 Plastics - Acquisition and presentation of comparable multipoint data - Thermal and processing properties
BS EN ISO 11403-1:2021 Tracked Changes. Plastics. Acquisition and presentation of comparable multipoint data. Mechanical properties
BS ISO 11403-1:1996 Plastics. Acquisition and presentation of comparable multipoint data. Mechanical
BS ISO 11403-2:1996 Plastics. Acquisition and presentation of comparable multipoint data. Thermal and processing properties
BS EN ISO 11403-2:2012 Plastics. Acquisition and presentation of comparable multipoint data. Thermal and processing properties
BS EN ISO 11403-3:2021 Tracked Changes. Plastics. Acquisition and presentation of comparable multipoint data. Environmental influences on properties
BS EN ISO 11403-2:2022 Tracked Changes. Plastics. Acquisition and presentation of comparable multipoint data. Thermal and processing properties
20/30419798 DC BS EN ISO 11403-1. Plastics. Acquisition and presentation of comparable multipoint data. Part 1. Mechanical properties
20/30419802 DC BS EN ISO 11403-3. Plastics. Acquisition and presentation of comparable multipoint data. Part 3. Environmental influences on properties
21/30377404 DC BS EN ISO 11403-2. Plastics. Acquisition and presentation of comparable multipoint data. Part 2. Thermal and processing properties
BS 2782-1 Method 140A:1992 Methods of testing plastics. Thermal properties. Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source
BS ISO 17484-1:2014 Plastics piping systems. Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa). Specifications for systems

AENOR, What is the ignition point of plastic

UNE 53950:2004 Plastics. Raw materials test for polyurethane. Determination of Cloud Point of polyols
UNE 53993:2009 IN Plastics. Thermoplastic tanks above ground or pit installation for liquid fuels including biodiesel with flashpoint higher than 55 oC.
UNE 53127:2002 Cellular plastics - Determination of horizontal burning characteristics of small specimens subjected to a small flame.
UNE-EN ISO 11403-1:2014 Plastics - Acquisition and presentation of comparable multipoint data - Part 1: Mechanical properties (ISO 11403-1:2014)
UNE-EN ISO 11403-2:2012 Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties (ISO 11403-2:2012)
UNE-EN ISO 11403-3:2014 Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties (ISO 11403-3:2014)
UNE-EN ISO 9773:1998 PLASTICS. DETERMINATION OF BURNING BEHAVIOUR OF THIN FLEXIBLE VERTICAL SPECIMENS IN CONTACT WITH A SMALL-FLAME IGNITION SOURCE. (ISO 9773:1998).
UNE-EN ISO 9773/A1:2004 Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source - Amendment 1: Specimens (ISO 9773:1998/Amd 1:2003)

Standard Association of Australia （SAA）, What is the ignition point of plastic

AS 2122.1:1993 Combustion characteristics of plastics - Determination of flame propagation - Surface ignition of vertically oriented specimens of cellular plastics
AS 2122.3:1993 Combustion characteristics of plastics - Determination of smoke-release - Cellular polyurethanes and polyisocyanurates

CZ-CSN, What is the ignition point of plastic

CSN 67 0535-2-1994 Inorganic pigments. Determination of optical constants of coloured pigments. Part 2: "Multipoint" test method

Japanese Industrial Standards Committee (JISC), What is the ignition point of plastic

JIS K 7241:2023 Cellular plastics -- Determination of horizontal burning characteristics of small specimens subjected to a small flame
JIS K 7141-1:2006 Plastics -- Acquisition and presentation of comparable multipoint data -- Part 1: Mechanical properties
JIS K 7141:1996 Plastics -- Acquisition and presentation of comparable multipoint data -- Part 1: Mechanical properties
JIS K 7341:2006 Plastics -- Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
JIS K 7141-2:1999 Plastics -- Acquisition and presentation of comparable multipoint data Part 2: Thermal and processing properties
JIS K 7141-3:2002 Plastics -- Acquisition and presentation of comparable multipoint data -- Part 3: Environmental influences on properties
JIS K 7141-2:2006 Plastics -- Acquisition and presentation of comparable multipoint data -- Part 2: Thermal and processing properties
JIS K 7053:1999 Textile glass reinforced plastics -- Determination of void content -- Loss on ignition, mechanical disintegration and statistical counting methods
JIS K 1557-7:2011 Plastics -- Polyols for use in the production of polyurethanes -- Part 7: Determination of basicity, expressed as percent nitrogen and total amine value

European Committee for Standardization (CEN), What is the ignition point of plastic

EN ISO 11403-1:1999 Plastics - Acquisition and Presentation of Comparable Multipoint Data - Part 1: Mechanical Properties ISO 11403-1: 1994;
EN ISO 11403-1:2021 Plastics - Acquisition and presentation of comparable multipoint data - Part 1: Mechanical properties (ISO 11403-1:2021)
EN ISO 11403-2:2012 Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties (ISO 11403-2:2012)
EN ISO 11403-2:1999 Plastics - Acquisition and Presentation of Comparable Multipoint Data - Part 2: Thermal and Processing Properties ISO 11403-2: 1995
EN ISO 11403-2:2022 Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties (ISO 11403-2:2022)
EN ISO 11403-3:2021 Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties (ISO 11403-3:2021)
EN ISO 11403-1:2014 Plastics - Acquisition and presentation of comparable multipoint data - Part 1: Mechanical properties
EN ISO 11403-1:2003 Plastics - Acquisition and presentation of comparable multipoint data - Part 1: Mechanical properties ISO 11403-1:2001
EN ISO 11403-3:2014 Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties
prEN ISO 11403-2:2021 Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties (ISO/DIS 11403-2:2021)
EN ISO 11403-2:2004 Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties ISO 11403-2:2004

International Organization for Standardization (ISO), What is the ignition point of plastic

ISO 11403-1:2001 Plastics - Acquisition and Presentation of Comparable Multipoint Data - Part 1: Mechanical Properties (Third edition)
ISO 11403-1:2014 Plastics - Acquisition and presentation of comparable multipoint data - Part 1: Mechanical properties
ISO 11403-1:1994 Plastics - Acquisition and presentation of comparable multipoint data - Part 1: Mechanical properties
ISO 11403-1:2021 Plastics — Acquisition and presentation of comparable multipoint data — Part 1: Mechanical properties
ISO 11403-2:2004 Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties
ISO 11403-2:1995 Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties
ISO 11403-2:2012 Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties
ISO 11403-3:2014 Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties
ISO 11403-3:1999 Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties
ISO 11403-3:2021 Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties
ISO/CD 9773 Plastics — Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
ISO 11403-2:2022 Plastics — Acquisition and presentation of comparable multipoint data — Part 2: Thermal and processing properties
ISO 17484-1:2006 Plastics piping systems Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) Part 1: Specifications for systems (Second Edition)
ISO 17484-1:2014 Plastics piping systems - Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) - Part 1: Specifications for systems
ISO 17484-1:2006/cor 1:2008 Plastics piping systems - Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) - Part 1: Specifications for systems; Technical Corrigendum 1

Korean Agency for Technology and Standards (KATS), What is the ignition point of plastic

KS M ISO 11403-1:2007 Plastics-Acquisition and presentation of comparable multipoint data-Part 1:Mechanical properties
KS M ISO 11403-1:2016 Plastics－Acquisition and presentation of comparable multipoint data－Part 1：Mechanical properties
KS M ISO 11403-1-2016(2021) Plastics－Acquisition and presentation of comparable multipoint data－Part 1：Mechanical properties
KS M ISO 11403-2:2013 Plastics — Acquisition and presentation of comparable multipoint data — Part 2: Thermal and processing properties
KS M ISO 11403-2:2007 Plastics-Acquisition and presentation of comparable multipoint data-Part 2:Thermal and processing properties
KS M ISO 11403-3:2007 Plastics－Acquisition and presentation of comparable multipoint data－Part 3：Environmental influences on properties
KS M ISO 11403-3:2017 Plastics－Acquisition and presentation of comparable multipoint data－Part 3：Environmental influences on properties
KS M ISO 9773-2016(2021) Plastics－Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
KS M ISO 11403-2:2018 Plastics — Acquisition and presentation of comparable multipoint data — Part 2: Thermal and processing properties

国家市场监督管理总局、中国国家标准化管理委员会, What is the ignition point of plastic

GB/T 37188.1-2019 Plastics—Acquisition and presentation of comparable multipoint data—Part 1: Mechanical properties
GB/T 37188.3-2019 Plastics—Acquisition and presentation of comparable multipoint data—Part 3:Environmental influences on properties
GB/T 37188.2-2018 Plastics—Acquisition and presentation of comparable multipoint data—Part 2:Thermal and processing properties

Danish Standards Foundation, What is the ignition point of plastic

DS/EN ISO 11403-1:2003 Plastics - Acquisition and presentation of comparable multipoint data - Part 1: Mechanical properties
DS/ISO 11403-1:2021 Plastics – Acquisition and presentation of comparable multipoint data – Part 1: Mechanical properties
DS/EN ISO 11403-2:2012 Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties
DS/EN ISO 11403-3:2001 Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties
DS/ISO 11403-3:2021 Plastics – Acquisition and presentation of comparable multipoint data – Part 3: Environmental influences on properties
DS/EN ISO 9773:1998 Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
DS/EN ISO 11403-1:2021 Plastics – Acquisition and presentation of comparable multipoint data – Part 1: Mechanical properties (ISO 11403-1:2021)
DS/EN ISO 11403-3:2021 Plastics – Acquisition and presentation of comparable multipoint data – Part 3: Environmental influences on properties (ISO 11403-3:2021)
DS/EN ISO 9773/A1:2004 Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source - Amendment 1: Specimens

IT-UNI, What is the ignition point of plastic

UNI EN ISO 11403-1:2021 Plastics - Acquisition and presentation of comparable multipoint data - Part 1: Mechanical properties
UNI EN ISO 11403-3:2021 Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties

KR-KS, What is the ignition point of plastic

KS M ISO 11403-1-2016 Plastics－Acquisition and presentation of comparable multipoint data－Part 1：Mechanical properties
KS M ISO 11403-3-2017 Plastics－Acquisition and presentation of comparable multipoint data－Part 3：Environmental influences on properties
KS M ISO 11403-3-2017(2022) Plastics－Acquisition and presentation of comparable multipoint data－Part 3：Environmental influences on properties
KS M ISO 9773-2016 Plastics－Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
KS M ISO 11403-2-2018 Plastics — Acquisition and presentation of comparable multipoint data — Part 2: Thermal and processing properties

German Institute for Standardization, What is the ignition point of plastic

DIN EN ISO 11403-1:2021-09 Plastics - Acquisition and presentation of comparable multipoint data - Part 1: Mechanical properties (ISO 11403-1:2021); German version EN ISO 11403-1:2021
DIN EN ISO 11403-1:2003 Plastics - Acquisition and presentation of comparable multipoint data - Part 1: Mechanical properties (ISO 11403-1:2001); German version EN ISO 11403-1:2003
DIN EN ISO 11403-3:2021-09 Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties (ISO 11403-3:2021); German version EN ISO 11403-3:2021
DIN EN ISO 11403-2:2022-10 Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties (ISO 11403-2:2022); German version EN ISO 11403-2:2022
DIN EN ISO 9773:2004-02 Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source (ISO 9773:1998 + Amd. 1:2003); German version EN ISO 9773:1998 + A1:2003 / Note: To be replaced by DIN EN ISO 9773 (2011-04).
DIN EN ISO 11403-1:2020 Plastics - Acquisition and presentation of comparable multipoint data - Part 1: Mechanical properties (ISO/DIS 11403-1:2020); German and English version prEN ISO 11403-1:2020
DIN EN ISO 11403-3:2020 Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties (ISO/DIS 11403-3:2020); German and English version prEN ISO 11403-3:2020
DIN EN ISO 11403-1:2021 Plastics - Acquisition and presentation of comparable multipoint data - Part 1: Mechanical properties (ISO 11403-1:2021); German version EN ISO 11403-1:2021
DIN EN ISO 11403-3:2021 Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties (ISO 11403-3:2021); German version EN ISO 11403-3:2021
DIN EN ISO 11403-1:2014 Plastics - Acquisition and presentation of comparable multipoint data - Part 1: Mechanical properties (ISO 11403-1:2014); German version EN ISO 11403-1:2014
DIN EN ISO 11403-2:2013 Plastics.Acquisition and presentation of comparable multipoint data.Part 2: Thermal and processing properties (ISO 11403-2:2012); German version EN ISO 11403-2:2012
DIN EN ISO 11403-3:2014 Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties (ISO 11403-3:2014); German version EN ISO 11403-3:2014
DIN EN ISO 11403-3:2002 Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties (ISO 11403-3:1999); German version EN ISO 11403-3:2001

ES-UNE, What is the ignition point of plastic

UNE-EN ISO 11403-1:2022 Plastics - Acquisition and presentation of comparable multipoint data - Part 1: Mechanical properties (ISO 11403-1:2021)
UNE 53993:2009 IN ERRATUM:2010 Plastics. Thermoplastic tanks above ground or pit installation for liquid fuels including biodiesel with flashpoint higher than 55 ºC.
UNE-EN ISO 11403-3:2022 Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties (ISO 11403-3:2021)
UNE-EN ISO 11403-2:2023 Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties (ISO 11403-2:2022)
UNE 53008-2:2016 Plastics piping systems. Multilayer pipe systems for gas installations pipework with a maximum operating pressure up to and including 5 bar (500 kPa). Part 2: Design, installation and maintenance

CEN - European Committee for Standardization, What is the ignition point of plastic

EN ISO 11403-3:2001 Plastics - Acquisition and Presentation of Comparable Multipoint Data - Part 3: Environmental Influences of Properties

NL-NEN, What is the ignition point of plastic

NEN 7200-1988 Plastics pipelines for the transport of gas, drinking water and waste water Buttwelding of PE pipes and fittings with a density of at least 930 kg/m3

Association Francaise de Normalisation, What is the ignition point of plastic

NF T50-064-1:2003 Plastics - Acquisition and presentation of comparable multipoint data - Part 1 : mechanical properties.
NF T50-064-1:2014 Plastics - Acquisition and presentation of comparable multipoint data - Part 1 : mechanical properties
NF T50-064-1*NF EN ISO 11403-1:2021 Plastics - Acquisition and presentation of comparable multipoint data - Part 1 : Mechanical properties
NF T50-064-2*NF EN ISO 11403-2:2012 Plastics - Acquisition and presentation of comparable multipoint data - Part 2 : thermal and processing properties
NF EN ISO 9773:1998 Plastiques - Détermination du comportement au feu d'éprouvettes minces verticales souples au contact d'une petite flamme comme source d'allumage
NF T50-064-3*NF EN ISO 11403-3:2021 Plastics - Acquisition and presentation of comparable multipoint data - Part 3 : environmental influences on properties
NF T50-064-3:2014 Plastics - Acquisition and presentation of comparable multipoint data - Part 3 : environmental influences on properties
NF EN 60749-32/A1:2011 Dispositifs à semiconducteurs - Méthodes d'essais mécaniques et climatiques - Partie 32 : inflammabilité des dispositifs à encapsulation plastique (cas d'une cause extérieure d'inflammation)
NF EN 60749-32:2003 Dispositifs à semiconducteurs - Méthodes d'essais mécaniques et climatiques - Partie 32 : inflammabilité des dispositifs à encapsulation plastique (cas d'une cause extérieure d'inflammation)
NF EN ISO 9773/A1:2004 Plastiques - Détermination du comportement au feu d'éprouvettes minces verticales souples au contact d'une petite flamme comme source d'allumage - Amendement 1 : éprouvettes

Lithuanian Standards Office , What is the ignition point of plastic

LST EN ISO 11403-1:2004 Plastics - Acquisition and presentation of comparable multipoint data - Part 1: Mechanical properties (ISO 11403-1:2001)
LST EN ISO 11403-1:2021 Plastics - Acquisition and presentation of comparable multipoint data - Part 1: Mechanical properties (ISO 11403-1:2021)
LST EN ISO 11403-2:2012 Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties (ISO 11403-2:2012)
LST EN ISO 9773:2001 Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source (ISO 9773:1998)
LST EN ISO 11403-3:2002 Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties (ISO 11403-3:1999)
LST EN ISO 11403-3:2021 Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties (ISO 11403-3:2021)
LST EN ISO 9773:2001/A1:2004 Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source - Amendment 1: Specimens (ISO 9773:1998/Amd 1:2003)

AT-ON, What is the ignition point of plastic

OENORM EN ISO 11403-1:2021 Plastics - Acquisition and presentation of comparable multipoint data - Part 1: Mechanical properties (ISO 11403-1:2021)
OENORM EN ISO 11403-3:2021 Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties (ISO 11403-3:2021)

CH-SNV, What is the ignition point of plastic

SN EN ISO 11403-1:2021 Plastics - Acquisition and presentation of comparable multipoint data - Part 1: Mechanical properties (ISO 11403-1:2021)
SN EN ISO 11403-3:2021 Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties (ISO 11403-3:2021)

未注明发布机构, What is the ignition point of plastic

BS EN ISO 9773:1999(2004) Plastics — Determination of burning behaviour of thin flexible vertical specimens in contact with a small - flame ignition source
DIN EN ISO 11403-2:2004 Plastics – Determination and presentation of comparable multi-point characteristics – Part 2: Thermal and processing properties (ISO 11403-2:2004); German version EN ISO 11403-2:2004
BS 2782-1-Method 140A:1992(1999) Methods of testing Plastics — Part 1 : Thermal properties — Method 140A : Determination of the burning behaviour of horizontal and vertical specimens in contact with a small - flame ignition source

ZA-SANS, What is the ignition point of plastic

SANS 17484-1:2010 Plastics piping systems - Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) Part 1: Specifications for systems