ZH
RU
ES
Plasticity
Plasticity, Total:497 items.
In the international standard classification, Plasticity involves: Welding, brazing and soldering, Fuels, Plastics, Wastes, Coals, Reinforced plastics, Road engineering, Pipeline components and pipelines, Iron and steel products, Rubber and plastics products, Cellular materials, Farm buildings, structures and installations, Paints and varnishes, Rubber, Analytical chemistry, Sacks. Bags, Construction materials, Protection against fire, Electrical accessories, Non-metalliferous minerals, Installations in buildings, Valves.
HU-MSZT, Plasticity
YU-JUS, Plasticity
- JUS G.S2.818-1990 Plastics. Cellular plastics, rigid. Determination of water absorption
- JUS G.S2.741-1996 Plastics - Optical properties of thermoplastic films - Determination of clarity of transparent plastic films
- JUS G.S2.813-1990 Cellular plastics. Compression test for rigid materials
- JUS G.S2.612-1982 Plastics. Determination of tensile properties
- JUS G.S2.740-1996 Plastics - Optical properties of thermoplastic films - Determination of specular gloss of plastic films
- JUS G.S2.617-1988 Plastics. Determination of Izod impact strength of rigid materials
RO-ASRO, Plasticity
American National Standards Institute （ANSI), Plasticity
- ANSI/AWS B2.4:2012 Specification for Welding Procedure and Performance Qualification for Thermoplastics
- ANSI/ASTM E5870:1997 Practice for Calculating the Property Retention Index of Plastics
- ANSI/ASTM D4804:1998 Test Method for Determining the Flammability Characteristics of Non-Rigid Solid Plastics (08.03)
RU-GOST R, Plasticity
- GOST 32561-2013 Hard coal. Determination of plastic properties. Gieseler plastometer method
- GOST R 54247-2010 Hard coal. Determination of plastic properties by Gieseler plastometer method
- GOST R 57222-2016 Plastics. Methods for the preparation of samples for biodegradation testing of plastic materials
- GOST 15088-2014 Plastics. Method for determination of Vicat softening temperature of thermoplastics
- GOST 18336-1973 Rigid cellular plastics. Method of test for modulus of elasticity
- GOST 20869-1975 Rigid cellular plastics. Method for determination of water absorption
- GOST 23630.2-1979 Plastics. Method for the determination of thermal conductivity
- GOST 25139-1993 Plastics. Determination of pourability
- GOST 21207-1981 Plastics. Method for determination of flammability
- GOST 28157-1989 Tests for flammability of plastic materials
- GOST R 50131-1992 Plastics. Determination of pourability
- GOST 28157-2018 Plastics. Methods for determining the resistance to burning
- GOST 21216.1-1993 Clay raw materials. Method for determination of plasticity
- GOST 4650-1980 Plastics. Methods for the determination of water absorption
- GOST 11012-2017 Plastics. Method of test for resistance to abrasion
- GOST 15882-1984 Plastics. Method of measuring elastic-viscous characteristics and curing kinetics of thermosets
AENOR, Plasticity
- UNE 32321:1995 HARD COAL. DETERMINATION OF PLASTIC PROPERTIES BY THE CONSTANT TORQUE GIESELER PLASTOMETER.
- UNE-EN ISO 293:2006 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2004)
- UNE-EN ISO 306:2015 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2013)
- UNE-EN ISO 3994:2014 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (ISO 3994:2014)
- UNE-EN ISO 7808:1999 PLASTICS - THERMOSETTING MOULDING MATERIALS - DETERMINATION OF TRANSFER FLOW (ISO 7808:1992)
- UNE-EN 12575:1999 PLASTICS. THERMOSET MOULDING COMPOUNDS. DETERMINATION OF THE DEGREE OF FIBRE WET OUT IN SMC.
- UNE 53246:1981 PLASTICS. DETERMINATION OF DIMENSION STABILITY OF THERMOPLASTIC MOULDED ARTICLES
- UNE-EN ISO 294-3:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2002)
- UNE 53126:2014 Plastics. Determination of coefficient of linear thermal expansion
- UNE-EN ISO 12114:1997 FIBRE-REINFORCED PLASTICS. THERMOSETTING MOULDING COMPOUNDS AND PREPREGS. DETERMINATION OF CURE CHARACTERISTICS. (ISO 12114:1997).
- UNE 53319:2001 Cellular plastics, rigid. Test for dimensional stability.
- UNE-EN 14447:2006 Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification
- UNE-EN 15860:2011 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
- UNE-EN 1778:2000 Characteristic values for welded thermoplastics constructions - Determination of allowable stresses and moduli for design of thermoplastics equipment
- UNE-EN ISO 294-2:1999 PLASTICS - INJECTION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS - PART 2: SMALL TENSILE BARS (ISO 294-2:1996)
- UNE-EN ISO 294-2:1999/A1:2006 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:1996/Amd 1:2004)
- UNE-EN 13421:2006 Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites
- UNE-EN 917:1997 PLASTICS PIPING SYSTEMS. THERMOPLASTICS VALVES. TEST METHODS FOR RESISTANCE TO INTERNAL PRESSURE AND LEAKTIGHTNESS.
Japanese Industrial Standards Committee (JISC), Plasticity
- JIS K 7212:1999 Plastics -- Determination of thermal stability of thermoplastics -- Oven method
- JIS Z 7311:2010 Refuse derived paper and plastics densified fuel
- JIS K 7206:1999 Plastics -- Thermoplastic materials -- Determination of Vicat softening temperature (VST)
- JIS K 7206:2016 Plastics -- Thermoplastic materials -- Determination of Vicat softening temperature (VST)
- JIS K 7151:1995 Plastics -- Compression moulding test specimens of thermoplastic materials
- JIS K 7152:1995 Plastics -- Injection moulding of test specimens of thermoplastic materials
- JIS K 7151 AMD 1:2009 Plastics -- Compression moulding test specimens of thermoplastic materials(Amendment 1)
- JIS K 7152-3:1999 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 3: Small plates
- JIS K 7152-3:2006 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 3: Small plates
- JIS K 7152-2:1999 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 2: Small tensile bars
- JIS K 7152-4:2001 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 4: Determination of moulding shrinkage
- JIS K 7152-4:2006 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 4: Determination of moulding shrinkage
- JIS K 5981:1992 Thermoplastic and thermosetting powder coating films
- JIS K 7210:1999 Plastics -- Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
- JIS C 8411:1999 Pliable plastics conduits
- JIS C 8411:2019 Pliable plastics conduits
- JIS K 7181:2011 Plastics -- Determination of compressive properties
- JIS K 7316:2013 Plastics -- Determination of scratch properties
- JIS K 7208:1995 Testing method for compressive properties of plastics
- JIS K 7171:2022 Plastics -- Determination of flexural properties
- JIS A 5709:1979 Thermoplastic bathtubs
- JIS K 7152-5:2007 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 5: Preparation of standard specimens for investigating anisotropy
Korean Agency for Technology and Standards (KATS), Plasticity
British Standards Institution (BSI), Plasticity
- BS EN ISO 293:2006 Plastics - Compression moulding of test specimens of thermoplastic materials
- BS EN ISO 7808:1993 Plastics. Thermosetting moulding materials. Determination of transfer flow
- BS ISO 16790:2005 Plastics - Determination of drawing characteristics of thermoplastics in the molten state
- BS PD CEN/TS 16892:2015 Plastics. Welding of thermoplastics. Specification of welding procedures
- BS EN ISO 294-3:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Small plates
- BS EN ISO 306:2013 Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST)
- BS EN ISO 294-3:2020 Plastics. Injection moulding of test specimens of thermoplastic materials - Small plates
- BS EN ISO 293:2023 Tracked Changes. Plastics. Compression moulding of test specimens of thermoplastic materials
- 22/30445226 DC BS EN ISO 293. Plastics. Compression moulding of test specimens of thermoplastic materials
- BS EN ISO 306:2022 Tracked Changes. Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST)
- 21/30430498 DC BS EN ISO 306. Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST)
- 20/30406605 DC BS ISO 16790. Plastics. Determination of drawing characteristics of thermoplastics in the molten state
- BS ISO 16790:2021 Tracked Changes. Plastics. Determination of drawing characteristics of thermoplastics in the molten state
- BS EN ISO 1133:2005 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
- BS EN ISO 294-2:2018 Tracked Changes. Plastics. Injection moulding of test specimens of thermoplastic materials. Small tensile bars
- BS ISO 294-5:2011 Plastics. Injection moulding of test specimens of thermoplastic materials. Preparation of standard specimens for investigating anisotropy
- BS ISO 4665:2016 Tracked Changes. Rubber, vulcanized or thermoplastic. Resistance to weathering
- 18/30382609 DC BS EN 1871. Road marking materials. Paint, thermoplastic and cold plastic materials. Physical properties
- BS EN ISO 178:2003 Plastics - Determination of flexural properties
- BS ISO 23673:2021 Plastics. Elasticity index. Determination of elastic property of melts
- BS EN ISO 1133-1:2011 Plastics. Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics. Standard method
- BS EN ISO 295:2004 Plastics - Compression moulding of test specimens of thermosetting materials
- BS EN ISO 3671:1978 Plastics - Aminoplastic moulding materials - Determination of volatile matter
- BS EN ISO 294-4:2019 Tracked Changes. Plastics. Injection moulding of test specimens of thermoplastic materials. Determination of moulding shrinkage
- 18/30382578 DC BS EN ISO 294-3. Plastics. Injection moulding of test specimens of thermoplastic materials. Part 3. Small plates
- BS 4998:1985 Specification for moulded thermoplastics dustbins (excluding lids)
- BS EN 14447:2005 Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification
- BS EN ISO 178:2010+A1:2013 Plastics. Determination of flexural properties
- BS EN ISO 604:2003 Plastics - Determination of compressive properties
- BS EN 917:1997 Plastics piping systems. Thermoplastics valves. Test methods for resistance to internal pressure and leaktightness
- BS CP 312-1:1973 Code of practice for plastics pipework (thermoplastics material) - General principles and choice of material
American Society for Testing and Materials (ASTM), Plasticity
- ASTM D7265-06 Standard Specification for Hydrogen Thermophysical Property Tables
- ASTM D7265-12 Standard Specification for Hydrogen Thermophysical Property Tables
- ASTM D5870-95 Standard Practice for Calculating Property Retention Index of Plastics
- ASTM D5870-22 Standard Practice for Calculating Property Retention Index of Plastics
- ASTM E2448-11 Standard Test Method for Determining the Superplastic Properties of Metallic Sheet Materials
- ASTM D5422-03 Standard Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer
- ASTM D5422-00 Standard Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer
- ASTM D5870-16 Standard Practice for Calculating Property Retention Index of Plastics
- ASTM D695-02a Standard Test Method for Compressive Properties of Rigid Plastics
International Organization for Standardization (ISO), Plasticity
- ISO 293:2004 Plastics - Compression moulding of test specimens of thermoplastic materials
- ISO 293:1986 Plastics; Compression moulding test specimens of thermoplastic materials
- ISO 293:2023 Plastics — Compression moulding of test specimens of thermoplastic materials
- ISO 10329:2009 Coal - Determination of plastic properties - Constant-torque Gieseler plastometer method
- ISO 293:1974 Plastics — Compression moulding test specimens of thermoplastic materials
- ISO 7808:1992 Plastics; thermosetting moulding materials; determination of transfer flow
- ISO 16790:2005 Plastics - Determination of drawing characteristics of thermoplastics in the molten state
- ISO 16790:2021 Plastics - Determination of drawing characteristics of thermoplastics in the molten state
- ISO 1133:1981 Plastics — Determination of the melt flow rate of thermoplastics
- ISO 306:1974 Plastics — Determination of the Vicat softening temperature of thermoplastics
- ISO 306:1994 Plastics - Thermoplastic materials - Determination of Vicat Softening Temperature (VST)
- ISO 11248:1993 Plastics; thermosetting moulding materials; evaluation of short-term performance at elevated temperatures
- ISO 306:2022 Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)
- ISO 2577:1984 Plastics; Thermosetting moulding materials; Determination of shrinkage
- ISO 13968:2008 Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility
- ISO 306:2004 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)
- ISO 306:2013 Plastics.Thermoplastic materials.Determination of Vicat softening temperature (VST)
- ISO 4899:1993 Textile-glass reinforced thermosetting plastics; properties and test methods
- ISO 294-3:2002 Plastics - Injection moulding of test specimens of thermoplastics materials - Part 3: Small plates
- ISO 4899:1982 Textile glass reinforced thermosetting plastics; Properties and test methods
- ISO 2577:2007 Plastics - Thermosetting moulding materials - Determination of shrinkage
- ISO 294-3:2020 Plastics — Injection moulding of test specimens of thermoplastic materials — Part 3: Small plates
- ISO 294-2:1996 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars
- ISO 6187:2001 Rigid cellular plastics - Determination of friability
- ISO 294-3:2002/Amd 1:2006 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates; Amendment 1
- ISO 294-2:1996/Amd 1:2004 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars; Amendment 1
- ISO 2796:1980 Cellular plastics — Test for dimensional stability of rigid materials
- ISO 178:1972 Title missing - Legacy paper document
- ISO 178:2010 Plastics - Determination of flexural properties
- ISO 178:2001 Plastics - Determination of flexural properties
- ISO 62:1999 Plastics - Determination of water absorption
- ISO 178:1993 Plastics; determination of flexural properties
- ISO 6186:1980 Plastics; Determination of pourability
- ISO 62:1980 Plastics; Determination of water absorption
- ISO 62:2008 Plastics - Determination of water absorption
- ISO 295:1974 Plastics; Compression moulding test specimens of thermosetting materials
- ISO 23673:2021 Plastics — Elasticity index — Determination of elastic property of melts
- ISO 1133:1997 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
- ISO 295:2004 Plastics - Compression moulding of test specimens of thermosetting materials
- ISO 295:1991 Plastics; compression moulding of test specimens of thermosetting materials
- ISO/R 1326:1970 Plastics; Determination of flammability and burning rate of plastics in the form of film
- ISO 2577:1975 Plastics — Thermosetting moulding materials — Determination of shrinkage of compression moulded test specimens in the form of bars
- ISO 3671:1976 Plastics; Aminoplastic moulding materials; Determination of volatile matter
- ISO 8328:1989 Plastics; amorphous thermoplastic moulding materials; determination of maximum reversion
- ISO 604:2002 Plastics - Determination of compressive properties
- ISO 19252:2008 Plastics - Determination of scratch properties
- ISO 604:1973 Plastics — Determination of compressive properties
- ISO 604:1993 Plastics; Determination of compressive properties
- ISO/R 527:1966 Plastics — Determination of tensile properties
- ISO/CD 19252:2023 Plastics — Determination of scratch properties
- ISO 180:1982 Plastics — Determination of Izod impact strength of rigid materials
- ISO 844:2004 Rigid cellular plastics - Determination of compression properties
- ISO 844:2007 Rigid cellular plastics — Determination of compression properties
- ISO 17771:2003 Plastics - Thermoset moulding compounds - Determination of the degree of fibre wet out in SMC
Association Francaise de Normalisation, Plasticity
- NF T58-003*NF EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials
- NF T51-018:1981 Plastics. Modulus of longitudinal elasticity of rigid plastics.
- NF T51-566:2006 Plastics - Determination of drawing characteristics of thermoplastics in the molten state.
- NF P98-603*NF EN 1871:2020 Road marking materials - Paint, thermoplastic and cold plastic materials - Physical properties
- NF EN ISO 293:2023 Plastiques - Moulage par compression des éprouvettes en matières thermoplastiques
- NF EN ISO 11248:1999 Plastiques - Matières à mouler thermodurcissables - Évaluation des performances à court terme aux températures élevées
- NF EN ISO 306:2022 Plastiques - Matières thermoplastiques - Détermination de la température de ramollissement Vicat (VST)
- NF B38-002*NF ISO 4899:1995 Textile-glass-reinforced thermosetting plastics. Properties and test methods.
- NF ISO 4665:2016 Caoutchouc vulcanisé ou thermoplastique - Résistance aux intempéries
- NF T51-294-3*NF EN ISO 294-3:2020 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3 : small plates
- NF T51-294-2/A1:2005 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2 : small tensile bars.
- NF T51-294-2*NF EN ISO 294-2:2018 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars
- NF ISO 4899:1995 Plastiques thermodurcissables renforcés au verre textile - Caractéristiques et méthodes d'essai
- NF EN ISO 294-3:2020 Plastiques - Moulage par injection des éprouvettes de matériaux thermoplastiques - Partie 3 : plaques de petites dimensions
- NF EN ISO 294-2:2018 Plastiques - Moulage par injection des éprouvettes de matériaux thermoplastiques - Partie 2 : Barreaux de traction de petites dimensions
- NF T54-202:2002 Silage thermoplastic films.
- NF ISO 4662:2017 Caoutchouc vulcanisé ou thermoplastique - Détermination de la résilience de rebondissement
- NF R80-501:1980 Flexible plastics and flexible cellular plastics. Staining capability.
- NF T51-116-2*NF EN ISO 6603-2:2002 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2 : instrumented puncture test
- NF EN ISO 13968:2008 Systèmes de canalisations et de gaines en matières plastiques - Tubes en matières thermoplastiques - Détermination de la flexibilité annulaire
- NF T51-021:1997 Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST).
- NF T54-913*NF EN ISO 13968:2008 Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility
- NF T51-294-4*NF EN ISO 294-4:2019 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4 : determination of moulding shrinkage
- NF EN ISO 294-4:2019 Plastiques - Moulage par injection des éprouvettes de matériaux thermoplastiques - Partie 4 : détermination du retrait au moulage
- NF T51-116-1*NF EN ISO 6603-1:2000 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1 : non-instrumented impact testing
- NF T51-001:2011 Plastics - Determination of flexural properties.
- NF T51-705*NF EN ISO 6186:1998 Plastics. Determination of pourability. .
- NF T51-166*NF EN ISO 62:2008 Plastics - Determination of water absorption
- NF T51-001:1997 Plastics. Determination of flexural properties.
- NF EN ISO 6186:1998 Plastiques - Détermination de l'aptitude à l'écoulement
- NF R84-001:1980 Plastiques souples - Caractéristiques permettant leur sélection.
- NF T47-254:1981 TEXTILE-REINFORCED THERMOPLASTICS COMPRESSED AIR HOSES FOR INDUSTRIAL USE. CHARACTERISTICS.
- NF T58-005*NF EN ISO 295:2004 Plastics - Compression moulding of test specimens of thermosetting materials
- NF T54-411*NF EN 15860:2018 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
- NF P85-513:1985 Sealants. Plastic type mastics for packing seals. Plasticity test.
- NF T57-541*NF EN 14447:2005 Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification
- NF EN 14447:2005 Plastiques renforcés de fibres - Thermoplastiques renforcés de mats de verre (GMT) - Détermination de la fluidité et de la solidification
- NF ISO 812:2017 Caoutchouc vulcanisé ou thermoplastique - Détermination de la fragilité à basse température
- NF T51-101*NF EN ISO 604:2004 Plastics - Determination of compressive properties.
- NF T51-101:1997 Plastics. Determination of compressive properties.
- NF T51-001*NF EN ISO 178:2019 Plastics - Determination of flexural properties
- NF T54-190:2017 Plastics - Thermoplastic covering films for use in agriculture and horticulture
- NF EN ISO 12114:1997 Plastiques renforcés de fibres - Compositions de moulage thermodurcissables et préimprégnés - Détermination des caractéristiques de durcissement.
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Plasticity
- GB/T 9352-2008 Plastic.Compression moulding of test specimens of thermoplastic materials
- GB/T 5471-2008 Plastic.Compression moulding of test specimens of thermosetting materials
- GB/T 1446-1983 The generals of test methods for properties of fiber-reinforced plastics
- GB/T 1446-2005 Fiber-reinforced plastics composites-The generals for determination of properties
- GB/T 41927-2022 Plastics—Thermosetting moulding materials—Evaluation of short-term performance at elevated temperatures
- GB/T 36532-2018 Fibre-reinforced plastics.Thermosetting moulding compounds and prepregs.Determination of cure characteristics
- GB/T 17037.3-2003 Plastics--Injection moulding of test specimens of thermoplastic materials--Part 3: Small plates
- GB/T 17037.4-2003 Plastic--Injection moulding of test specimens of thermoplastic materials--Part 4: Determination of moulding shrinkage
- GB/T 1034-2008 Plastics.Determination of water absorption
- GB/T 21060-2007 Plastics.Determination of pourability
- GB/T 1034-1998 Plastics--Determination of water absorption
- GB/T 1041-2008 Plastics.Determination of compressive properties
- GB/T 41878-2022 Plastics—Determination of scratch properties
- GB/T 9341-2008 Plastic.Determination of flexural properties
- GB/T 27725-2011 Butterfly valves of thermoplastics materials
SE-SIS, Plasticity
ZA-SANS, Plasticity
- SANS 737:2009 Coal - Determination of plastic properties - Constant-torque Gieseler plastometer method
- SANS 5600:1978 Acute systemic toxicity of plastics for medical use
PL-PKN, Plasticity
- PN C89418-1990 Plastics Determination of volatile matter in thermoplastics
- PN-EN 1871-2021-03 E Road marking materials -- Paint, thermoplastic and cold plastic materials -- Physical properties
- PN C89012-1988 Plastics Recommended practice for injection moulding test specirnens of thermoplastic materials
- PN-EN ISO 294-3-2021-01 E Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020)
- PN C89043-1972 Plastics Delermination of ?echnological proper?ies of thermosetting materials
- PN C89044-1975 Plastics Phenolic resins Determination of free phenols
- PN C89077-02-1993 Cellular plastice rigid. Flexural tests. Determination of fluxural properties
German Institute for Standardization, Plasticity
- DIN EN 1871:2020 Road marking materials - Paint, thermoplastic and cold plastic materials - Physical properties; German version EN 1871:2020
- DIN EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2004); English version of DIN EN ISO 293
- DIN 35230:2016-09 Plastics - Welding of thermoplastics - Specification of welding procedures; German version CEN/TS 16892:2015
- DIN EN ISO 293:2023-06 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023); German version EN ISO 293:2023
- DIN EN ISO 7808:1998 Plastics - Thermosetting moulding materials - Determination of transfer flow (ISO 7808:1992); German version EN ISO 7808:1998
- DIN EN 1871:2020-12 Road marking materials - Paint, thermoplastic and cold plastic materials - Physical properties; German version EN 1871:2020
- DIN EN ISO 294-3:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2002); German version EN ISO 294-3:2003
- DIN EN ISO 293:2023 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023)
- DIN EN ISO 306:2023 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2022)
- DIN EN ISO 306:2023-03 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2022); German version EN ISO 306:2022
- DIN 53428:1986 Determination of the behaviour of cellular plastics when exposed to fluids, vapours and solids
- DIN 5059-2:2012-04 Packaging - Metallic and flexible plastics tubes - Part 2: Flexible plastics tubes; Tube nozzles
- DIN EN ISO 294-2:2006 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:1996 + Amd.1:2004); English version of DIN EN ISO 294-2:2006-05
- DIN EN ISO 294-3:2020-11 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020); German version EN ISO 294-3:2020
- DIN EN 14447:2005 Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification; German version of EN 14447:2005
- DIN EN ISO 3994:2015-11 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (ISO 3994:2014); German version EN ISO 3994:2014
- DIN EN ISO 13968:2009 Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility (ISO 13968:2008); English version of DIN EN ISO 13968:2009-01
- DIN EN ISO 294-2:2019-03 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:2018); German version EN ISO 294-2:2018
- DIN EN ISO 62:2008 Plastics - Determination of water absorption (ISO 62:2008); German version EN ISO 62:2008
- DIN EN ISO 6186:2023-02 Plastics - Determination of pourability (ISO/DIS 6186:2023); German and English version prEN ISO 6186:2023 / Note: Date of issue 2023-01-20*Intended as replacement for DIN EN ISO 6186 (1998-08).
- DIN 8038:2020-04 Twist drills with parallel shank with carbide tips for drilling plastics (thermosetting plastics)
- DIN EN 1842:1997-11 Plastics - Thermoset moulding compounds (SMC - BMC) - Determination of compression moulding shrinkage; German version EN 1842:1997
- DIN EN ISO 12114:1997-08 Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of cure characteristics (ISO 12114:1997); German version EN ISO 12114:1997
- DIN EN ISO 294-2:2019 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:2018)
- DIN EN ISO 293:2023-10 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023); German version EN ISO 293:2023
- DIN EN ISO 6186:1998 Plastics - Determination of pourability (ISO 6186:1998); German version EN ISO 6186:1998
- DIN 8038:2020 Twist drills with parallel shank with carbide tips for drilling plastics (thermosetting plastics)
- DIN EN 26590-2:1993 Packaging; sacks; vocabulary and types; part 2: sacks made from thermoplastic flexible film (ISO 6590-2:1986); german version EN 26590-2:1992
- DIN EN ISO 295:2004 Plastics - Compression moulding of test specimens of thermosetting materials (ISO 295:2004); German version EN ISO 295:2004
- DIN EN ISO 13968:2009-01 Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility (ISO 13968:2008); German version EN ISO 13968:2008
- DIN EN 15860:2018 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
- DIN EN ISO 3671:1998 Plastics - Aminoplastic moulding materials - Determination of volatile matter (ISO 3671:1976); German version EN ISO 3671:1998
- DIN EN ISO 294-4:2019-04 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2018); German version EN ISO 294-4:2019
- DIN EN 14447:2005-07 Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification; German version of EN 14447:2005
- DIN EN 13421:2006-05 Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites; German version EN 13421:2005
- DIN EN ISO 604:2003 Plastics - Determination of compressive properties (ISO 604:2002); German version EN ISO 604:2003
- DIN EN ISO 178:2019-08 Plastics - Determination of flexural properties (ISO 178:2019); German version EN ISO 178:2019
- DIN EN ISO 604:2003-12 Plastics - Determination of compressive properties (ISO 604:2002); German version EN ISO 604:2003
- DIN EN 917:1997-03 Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leaktightness; German version EN 917:1997
- DIN EN 13207:2018-05 Plastics - Thermoplastic silage films and tubes for use in agriculture; German version EN 13207:2018
- DIN EN ISO 294-1:1998 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles, and moulding of multipurpose and bar test specimens (ISO 294-1:1996); German version EN ISO 294-1:1998
European Committee for Standardization (CEN), Plasticity
- EN ISO 293:2023 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023)
- EN ISO 293:2003 Plastics - Compression moulding test specimens of thermoplastic materials ISO 293: 1986
- EN ISO 306:2022 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2022)
- EN ISO 306:1996 Plastics - Thermoplastic Materials - Determination of Vicat Softening Temperature (VST) ISO 306:1994
- EN ISO 306:2013 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)
- PD CEN/TS 16892:2015 Plastics - Welding of thermoplastics - Specification of welding procedures
- CEN/TS 16892:2015 Plastics - Welding of thermoplastics - Specification of welding procedures
- EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2004)
- EN ISO 178:1996 Plastics - Determination of Flexural Properties ISO 178: 1993
- EN ISO 178:2019 Plastics - Determination of flexural properties (ISO 178:2019)
- EN ISO 178:2010 Plastics - Determination of flexural properties (ISO 178:2010)
- EN ISO 13968:2008 Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility
- EN ISO 294-3:2020 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020)
- EN ISO 294-3:1998 Plastics - Injection Moulding of Test Specimens of Thermoplastic Materials - Part 3: Small Plates ISO 294-3:1996
- EN ISO 294-3:2003 Plastics - Injection Moulding of Test Specimens of Thermoplastic Materials - Part 3: Small Plates ISO 294-3: 2002
- EN ISO 294-4:1998 Plastics - Injection Moulding of Test Specimens of Thermoplastic Materials - Part 4: Determination of Moulding Shrinkage ISO 294-4:1997
- EN ISO 294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage
- EN 15860:2010 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
- EN 15860:2018 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
- EN ISO 62:2008 Plastics - Determination of water absorption (ISO 62:2008)
- EN 638:1994 Plastics Piping and Ducting Systems - Thermoplastics Pipes - Determination of Tensile Properties
- EN ISO 295:1998 Plastics - Compression Moulding of Test Specimens of Thermosetting Materials ISO 295:1991
- EN 14447:2005 Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification
- EN ISO 604:1996 Plastics - Determination of Compressive Properties ISO 604:1993
- EN ISO 294-1:2017 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles@ and moulding of multipurpose and bar test specimens
CZ-CSN, Plasticity
Danish Standards Foundation, Plasticity
- DS/EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials
- DS/EN ISO 306:2004 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)
- DS/EN 1871:2020 Road marking materials – Paint, thermoplastic and cold plastic materials – Physical properties
- DS/EN ISO 3994:2011 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification
- DS/EN ISO 294-3:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates
- DS/EN ISO 12114:1997 Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of cure characteristics
- DS/EN ISO 294-2/A1:2005 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars
- DS/EN ISO 294-2:1999 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars.
- DS/INSTA 219:1990 Plastics pipes. Sealing rings of thermoplastic elastomers
- DS/EN 12575:1999 Plastics - Thermoset moulding compounds - Determination of the degree of fibre wet out in SMC
- DS/EN 1842:1998 Plastics - Thermoset moulding compounds (SMC-BMC) - Determination of compression moulding shrinkage
- DS/EN ISO 13968:2008 Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility
- DS/EN ISO 294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage
- DS/EN ISO 6186:1999 Plastics - Determination of pourability
- DS/EN 14447:2005 Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification
- DS/EN ISO 12115:1997 Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs Determination of flowability, maturation and shelf life
- DS/EN 15860:2010 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
- DS/EN ISO 178:2011 Plastics - Determination of flexural properties
- DS/EN ISO 178/A1:2013 Plastics - Determination of flexural properties
- DS/EN ISO 604:2003 Plastics - Determination of compressive properties
- DS/EN 1778:2000 Characteristic values for welded thermoplastics constructions - Determination of allowable stresses and moduli for design of thermoplastics equipment
- DS/EN 13421:2006 Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites
- DS/EN 917:1998 Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leaktightness
CEN - European Committee for Standardization, Plasticity
- EN ISO 7808:1998 Plastics - Thermosetting moulding materials- Determination of transfer flow
- EN ISO 1133:2005 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
- EN ISO 1133:1999 Plastics - Determination of the Melt Mass-Flow Rate (MFR) and the Melt Volume-Flow Rate (MVR) of Thermoplastics
- EN ISO 306:2004 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)
- PREN 1871-2018 Road marking materials - Paint@ thermoplastic and cold plastic materials - Physical properties
- EN ISO 294-4:2019 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage
- EN ISO 3671:1998 Plastics - Aminoplastic moulding materials - Determination of volatile matter
Group Standards of the People's Republic of China, Plasticity
United States Navy, Plasticity
海关总署, Plasticity
- SN/T 5408-2022 How to identify recycled plastics and modified plastics
未注明发布机构, Plasticity
- DIN EN ISO 293:2003 Plastics — Compression molding test specimens of thermoplastic materials
- DIN EN ISO 294-2:1998 Plastics — Injection molding of test specimens of thermoplastic materials — Part 2: Small tensile bars
- BS EN 638:1995(1999) Plastics piping and ducting systems — Thermoplastics pipes — Determination of tensile properties
- DIN EN ISO 306:2004 Plastics – Thermoplastics – Determination of Vicat softening temperature (VST) (ISO 306:2004); German version EN ISO 306:2004
- DIN EN ISO 7792-1:2004 Plastics – Thermoplastic polyester (TP) molding compounds – Part 1: Designation system and basis for specifications
- DIN EN ISO 1133:2005 Plastics – Determination of melt mass flow rate (MFR) and melt volume flow rate (MVR) of thermoplastics
- BS EN 1446:1996 Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility
- DIN EN ISO 294-3:1998 Plastics Injection molding of thermoplastic test specimens Part 3: Small plates
TR-TSE, Plasticity
- TS 986-1971 PLASTICS DETERMINATION OF INCANDESCENCE RESISTANCE OF RIGID SELFEXTINGUISHING THERMOSETTING PLASTICS
- TS 1825-1975 PLASTICS DETERMINATION OF THE VICAT SOFTENING TEMPERATURE OF THERMOPLASTICS
- TS 1850-1975 PLASTICS DETERMINATION OF FLAMMABILITY OF PLASTICS ?N THE FORM OF BARS
- TS 985-1971 PLASTICS DETERMINATION OF FLEXURAL PROPERTIES OF RIGID PLASTICS
- TS 702-1969 P L A S T I C S DETERMINATION OF WATER ABSORPTION
- TS 1856-1975 RIGID CELLULAR PLASTICS — DETERMINATION OF LINEAR DIMENSIONS
- TS 1408-1978 PLASTICS - COMPRESSION MOULDING TEST SPECIMENS OF THERMOSETTING MATERIALS
- TS 3154-1978 PLASTICS - AMINOPLASTIC MOULDING MATERIALSDETERMINATION OF VOLATILE MATTER
Lithuanian Standards Office , Plasticity
- LST EN ISO 3994:2011 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (ISO 3994:2007)
- LST EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2004)
- LST EN 1871-2021 Road marking materials - Paint, thermoplastic and cold plastic materials - Physical properties
- LST EN ISO 306:2004 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2004)
- LST EN ISO 11248:2002 Plastics - Thermosetting moulding materials - Evaluation of short-term performance at elevated temperatures (ISO 11248:1993)
- LST EN 12575-2001 Plastics - Thermoset moulding compounds - Determination of the degree of fibre wet out in SMC
- LST EN ISO 294-3:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2002)
- LST EN ISO 12114:2000 Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of cure characteristics (ISO 12114:1997)
- LST EN ISO 294-2:2000 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:1996)
- LST EN 14447-2005 Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification
- LST EN 15860-2010 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
- LST EN 1778-2000 Characteristic values for welded thermoplastics constructions - Determination of allowable stresses and moduli for design of thermoplastics equipment
- LST EN ISO 294-2:2000/A1:2005 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:1996/Amd 1:2004)
- LST EN 13421-2006 Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites
- LST EN 917-2001 Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leaktightness
Indonesia Standards, Plasticity
- SNI ISO 306:2011 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)
ES-UNE, Plasticity
- UNE-EN ISO 306:2023 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2022)
- UNE-EN 1871:2021 Road marking materials - Paint, thermoplastic and cold plastic materials - Physical properties
- UNE-EN ISO 294-3:2021 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020)
- UNE-EN ISO 294-4:2019 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2018)
- UNE-EN ISO 294-2:2019 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:2018)
- UNE-EN ISO 178:2020 Plastics - Determination of flexural properties (ISO 178:2019)
- UNE-EN ISO 294-5:2018 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy (ISO 294-5:2017)
- UNE-EN 13207:2018 Plastics - Thermoplastic silage films and tubes for use in agriculture
AT-ON, Plasticity
- OENORM EN 1871-2020 Road marking materials - Paint, thermoplastic and cold plastic materials - Physical properties
- ONORM C 9515-1982 Testing of plastics; Determination of the Melt-Flow-Index of tbermoplastics
- OENORM EN ISO 294-3:2020 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020)
U.S. Military Regulations and Norms, Plasticity
- ARMY MIL-HDBK-797-1994 POLYAMIDE (NYLON) PLASTICS: PROPERTIES, PROCESSING, PERFORMANCE, AND MILITARY APPLICATIONS
GOSTR, Plasticity
- GOST R 59150-2020 Vapor-insulating flexible polymeric materials (thermoplastic and elastomeric). General specifications
- GOST 20869-2017 Rigid cellular plastics. Method for determination of water absorption
International Federation of Trucks and Engines, Plasticity
(U.S.) Ford Automotive Standards, Plasticity
CH-SNV, Plasticity
国家市场监督管理总局、中国国家标准化管理委员会, Plasticity
- GB/T 39818-2021 Plastics—Thermosetting moulding materials—Determination of shrinkage
- GB/T 39385-2020 Plastics piping and ducting systems—Thermoplastics pipes—Determination of ring flexibility
- GB/T 17037.2-2020 Plastics—Injection moulding of test specimens of thermoplastic materials—Part 2:Small tensile bars
- GB/T 17037.5-2020 Plastics—Injection moulding of test specimens of thermoplastic materials—Part 5: Preparation of standard specimens for investigating anisotropy
- GB/T 37842-2019 Ball valves of thermoplastics materials
- GB/T 38008-2019 Gate valves of thermoplastics materials
IX-SA, Plasticity
FI-SFS, Plasticity
- SFS 3257-1976 MUOVIT. KESTOMUOVISET RUISKUPURISTETUT KOEKAPPALEET
CU-NC, Plasticity
- NC 30-61-1987 Plastics. Compression Moulding of Thermoplastic Materials. General Requirements
工业和信息化部, Plasticity
- SH/T 1824-2019 Determination of antimony content in plastic thermoplastic polyesters
GM Europe, Plasticity
KR-KS, Plasticity
BE-NBN, Plasticity
GM North America, Plasticity
SAE - SAE International, Plasticity
Society of Automotive Engineers (SAE), Plasticity
General Motors Corporation (GM), Plasticity
CO-ICONTEC, Plasticity
International Truck and Engine Corporation (ITEC), Plasticity
Taiwan Provincial Standard of the People's Republic of China, Plasticity
- CNS 8516-1982 Method of Test for Flow Rates of Thermoplastics by Extrusion Plastometer
ES-AENOR, Plasticity
PT-IPQ, Plasticity
GM Global, Plasticity
- GMW 15725-2013 Performance Requirements for Engine Compartment Plastic Parts Issue 2; English
IT-UNI, Plasticity
Aerospace Industries Association/ANSI Aerospace Standards, Plasticity
Guangdong Provincial Standard of the People's Republic of China, Plasticity