ZH
RU
ES

Insulation Electrical Aging Thermal Aging

Insulation Electrical Aging Thermal Aging, Total:286 items.

In the international standard classification, Insulation Electrical Aging Thermal Aging involves: Industrial furnaces, Insulating materials, Electricity. Magnetism. Electrical and magnetic measurements, Transformers. Reactors, Insulating fluids, Electrical accessories, Insulation, Rotating machinery, Construction materials, Test conditions and procedures in general, Electrical wires and cables, Radiation measurements, Protection of and in buildings, Elements of buildings, Glass, Vocabularies, Nuclear energy engineering, Electrical engineering in general, Reinforced plastics, Rubber, Rubber and plastics products, Aerospace electric equipment and systems, Materials for aerospace construction.

German Institute for Standardization, Insulation Electrical Aging Thermal Aging

DIN EN 60216-4-3:2001 Electrical insulating materials - Thermal endurance properties - Part 4-3: Ageing ovens; Multi-chamber ovens (IEC 60216-4-3:2000); German version EN 60216-4-3:2000
DIN EN 60216-4-1:2006 Electrical insulating materials - Thermal endurance properties - Part 4-1: Ageing ovens - Single-chamber ovens (IEC 60216-4-1:2006); German version EN 60216-4-1:2006
DIN EN 61065:1994 Method for evaluating the low temperature flow properties of mineral insulating oils after ageing (IEC 61065:1991); German version EN 61065:1993
DIN EN 60216-4-2:2001 Electrical insulating materials - Thermal endurance properties - Part 4-2: Ageing ovens; Precision ovens for use up to 300 °C (IEC 60216-4-2:2000); German version EN 60216-4-2:2000
DIN EN 60450:2008 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials (IEC 60450:2004 + A1:2007); German version EN 60450:2004 + A1:2007
DIN EN 60216-1:2014 Electrical insulating materials.Thermal endurance properties.Part 1: Ageing procedures and evaluation of test results (IEC 60216-1:2013); German version EN 60216-1:2013
DIN EN 60811-401:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven (IEC 60811-401:2012); German version EN 60811-401:2012
DIN EN 60811-412:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb (IEC 60811-412:2012); German version EN 60811-412:2012
DIN EN 60544-5:2012 Electrical insulating materials - Determination of the effects of ionizing radiation - Part 5: Procedures for assessment of ageing in service (IEC 60544-5:2011); German version EN 60544-5:2012
DIN EN 4057-306:2008 Aerospace series - Cable ties for harnesses - Test methods - Part 306: Heat ageing test; German and English version EN 4057-306:2006

PT-IPQ, Insulation Electrical Aging Thermal Aging

British Standards Institution (BSI), Insulation Electrical Aging Thermal Aging

BS EN 60216-4-1:2006 Electrical insulating materials - Thermal endurance properties - Ageing ovens - Single-chamber ovens
BS EN 60216-1:2013 Electrical insulating materials. Thermal endurance properties. Ageing procedures and evaluation of test results
BS EN 60216-4-3:2000 Guide for the determination of thermal endurance properties of electrical insulating materials. Electrical insulating materials. Thermal endurance properties. Ageing ovens. Multi-chamber ovens
BS 7836:1996 Measurement of the average viscometric degree of polymerization of new and aged electric papers
BS 5691-4.1:1995 Guide for the determination of thermal endurance properties of electrical insulating materials - Ageing ovens - Single chamber ovens
BS EN 61065:1993 Method for evaluating the low temperature flow properties of mineral insulating oils after ageing
BS EN 60216-1:2002 Guide for the determination of thermal endurance properties of electrical insulating materials - Ageing procedures and evaluation of test results
BS EN IEC 60544-5:2022 Electrical insulating materials. Determination of the effects of ionizing radiation - Procedures for assessment of ageing in service
BS ISO 11561:1999 Ageing of thermal insulation materials - Determination of the long-term change in thermal resistance of closed-cell plastics (accelerated laboratory test methods)
BS EN 60811-1-2:1995 Insulating and sheathing materials of electric cables - Common test methods - General application - Thermal ageing methods
BS EN 60811-401:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Miscellaneous tests. Thermal ageing methods. Ageing in an air oven
BS EN 60544-5:2003 Electrical insulating materials. Determination of the effects of ionizing radiation. Procedures for assessment of ageing in service
BS EN 60544-5:2012 Electrical insulating materials. Determination of the effects of ionizing radiation. Procedures for assessment of ageing in service
BS EN 60811-412:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Miscellaneous tests. Thermal ageing methods. Ageing in an air bomb
BS EN 60811-401:2012+A1:2017 Electric and optical fibre cables. Test methods for non-metallic materials - Miscellaneous tests. Thermal ageing methods. Ageing in an air oven
20/30398376 DC BS EN IEC 60544-5. Electrical insulating materials. Determination of the effects of ionizing radiation. Part 5. Procedures for assessment of ageing in service
BS EN 4057-306:2007 Aerospace series - Cable ties for harnesses - Test methods - Heat ageing test
BS EN 4057-306:2006 Aerospace Series. Cable Ties for Harnesses. Test Methods. Part 306: Heat Ageing Test

European Committee for Electrotechnical Standardization（CENELEC）, Insulation Electrical Aging Thermal Aging

EN 60216-4-3:2000 Electrical Insulating Materials - Thermal Endurance Properties Part 4-3: Ageing Ovens - Multi-Chamber Ovens
EN 60216-4-1:2006 Electrical insulating materials - Thermal endurance properties Part 4-1: Ageing ovens - Single-chamber ovens
EN 60544-5:2012 Electrical insulating materials - Determination of the effects of ionizing radiation - Part 5: Procedures for assessment of ageing in service
EN 61065:1993 Method for Evaluating the Low Temperature Flow Properties of Mineral Insulating Oils After Ageing
EN 60216-4-2:2000 Electrical Insulating Materials - Thermal Endurance Properties Part 4-2: Ageing Ovens - Precision Ovens for Use up to 300 Degrees Celsius
HD 505.1.2 S1-1988 Common Test Methods for Insulating and Sheathing Materials of Electric Cables Part 1: Methods for General Application Section Two - Thermal Ageing Methods
HD 611.1 S1-1992 Guide for the Determination of Thermal Endurance Properties of Electrical Insulating Materials Part 1: General Guidelines for Ageing Procedures and Evaluation of Test Results
EN 60811-412:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb
EN 60811-401:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven
EN 60450:2004 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials (Incorporates Amendment A1: 2007)
HD 505.1.2 S2-1991 Common Test Methods for Insulating and Sheathing Materials of Electric Cables Part 1: Methods for General Application Section Two - Thermal Ageing Methods

Taiwan Provincial Standard of the People's Republic of China, Insulation Electrical Aging Thermal Aging

CNS 14952-4-1-2005 Guide for the determination of thermal endurance properties of electrical insulating materials - Part 4: Ageing ovens - section 1: single-chamber ovens
CNS 14954-2005 Principle aspects of functional evaluation of electrical insulation systems - Ageing mechanisms and diagnostic procedures
CNS 14952-1-2005 Guide for the determination of thermal endurance properties of electrical insulating materials - Part 1: General guidelines for ageing procedure and evaluation of test results

American National Standards Institute （ANSI), Insulation Electrical Aging Thermal Aging

ANSI/ASTM D3251:2004 Test Method for Thermal-Aging Characteristics of Electrical Insulating Varnishes Applied Over Film-Insulated Magnet Wire (10.02)
ANSI/IEEE 1205Corrigendum 1:2006 Guide for Assessing, Monitoring, and Mitigating Aging Effects on Class 1E Equipment Used in Nuclear Power Generating Stations - Corrigendum 1: Thermal Aging Model Corrections
ANSI/ASTM D2903:2011 Specification for Crosslinked Chlorinated Polyolefin Heat-Shrinkable Tubing for Electrical Insulation

Association Francaise de Normalisation, Insulation Electrical Aging Thermal Aging

NF C26-304:1990 Determination of thermal endurance properties of electrical insulating materials. Ageing ovens. Section 1 : single-chamber ovens.
NF EN 60216-4-3:2000 Matériaux isolants électriques - Propriétés d'endurance thermique - Partie 4-3 : étuves de vieillissement - étuves à chambres multiples
NF C26-304-1*NF EN 60216-4-1:2006 Electrical insulating materials - Thermal endurance properties - Part 4-1 : ageing ovens - Single-chamber ovens
NF C26-304-3*NF EN 60216-4-3:2000 Electrical insulating materials - Thermal endurance properties - Part 4-3 : ageing ovens - Multi-chamber ovens
NF EN 60216-4-1:2006 Matériaux isolants électriques - Propriétés d'endurance thermique - Partie 4-1 : étuves de vieillissement - Étuves à une chambre
NF C26-301:2002 Electrical insulating materials - Properties of thermal endurance - Part 1 : ageing procedures and evaluation of test results.
NF EN 60216-1:2013 Matériaux isolants électriques - Propriétés d'endurance thermique - Partie 1 : méthodes de vieillissement et évaluation des résultats d'essai
NF C26-301*NF EN 60216-1:2013 Electrical insulating materials - Thermal endurance properties - Part 1: ageing procedures and evaluation of test results
NF C26-301:1990 Determination of thermal endurance properties of electrical insulating materials. General guidelines for ageing procedures and evaluation of test results.
NF C26-202:1975 Méthodes d'essai des matières isolantes - Analyse statistique de données d'essais de vieillissement.
NF C26-270/A1*NF EN 60450/A1:2007 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials
NF C26-304-2*NF EN 60216-4-2:2001 Electrical insulating materials - Thermal endurance properties - Part 4-2 : ageing ovens - Precision ovens for use up to 300 oC
NF C27-110*NF EN 61065:1993 Method for evaluating the low temperature flow properties of mineral insulating oils after ageing.
NF EN 61065:1993 Méthode d'évaluation des propriétés d'écoulement à basse température des huiles minérales isolantes , après vieillissement
NF EN 60216-4-2:2001 Matériaux isolants électriques - Propriétés d'endurance thermique - Partie 4-2 : étuves de vieillissement - Étuves de précision pour des utilisations pouvant atteindre 300 oC
NF C26-270*NF EN 60450:2004 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials
NF P75-460-1*NF ISO 18393-1:2012 Thermal insulating products - Determination of ageing by settlement - Part 1 : blown loose-fill insulation for ventilated attics
NF C32-025/A2:2001 Insulating and sheathing materials of electric cables - Common test methods - Part 1 : general application - Section 2 : thermal ageing methods.
NF C32-025:1996 Insulating and sheathing materials of electric cables - Common test methods - Part 1 : general application - Section 2 : thermal ageing methods.
NF C26-290-5:2003 Electrical insulation materials - Determinination of the effects of ionising - radiation - Part 5 : procedures for assessment of ageing in service.
NF EN IEC 60544-5:2022 Matériaux isolants électriques - Détermination des effets des rayonnements ionisants - Partie 5 : Procédures pour l'évaluation du vieillissement en service
NF EN 60450/A1:2007 Mesure du degré de polymérisation moyen viscométrique des matériaux isolants cellulosiques neufs et vieillis à usage électrique
NF EN 60450:2004 Mesure du degré de polymérisation moyen viscométrique des matériaux isolants cellulosiques neufs et vieillis à usage électrique
NF C32-011-401*NF EN 60811-401:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: miscellaneous tests - Thermal ageing methods - Ageing in an air oven
NF C32-011-412*NF EN 60811-412:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: miscellaneous tests - Thermal ageing methods - Ageing in an air bomb
NF EN 60811-401/A1:2017 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 401 : essais divers - Méthodes de vieillissement thermique - Vieillissement en étuve à air
NF EN 60811-401:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 401 : essais divers - Méthodes de vieillissement thermique - Vieillissement en étuve à air
NF C26-290-5*NF EN 60544-5:2012 Electrical insulating materials - Determination of the effects of ionizing radiation - Part 5: procedures for assessment of ageing in service
NF EN 60811-412:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 412 : essais divers - Méthode de vieillissement thermique - Vieillissement dans une bombe à air
NF C32-011-401/A1*NF EN 60811-401/A1:2017 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401 : miscellaneous tests - Thermal ageing methods - Ageing in an air oven
NF C26-245:1990 Test procedure for thermal indurance of insulating varnishes. Electric strength method.
NF EN 3475-416:2006 Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essais - Partie 416 : vieillissement à la chaleur
NF C32-032:1993 COMMON TEST METHODS FOR INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES. PART 4 : METHODS SPECIFIC TO POLYETHYLENE AND POLYPROPYLENE COMPOUDS. SECTION TWO. ELONGATION AT BREAK AFTER PRE-CONDITIONING. WRAPPING TEST AFTER THERMAL AGEING IN AIR. MEASUR
NF L52-252-306*NF EN 4057-306:2007 Aerospace series - Cable ties for harnesses - Test methods - Part 306 : heat ageing test

Korean Agency for Technology and Standards (KATS), Insulation Electrical Aging Thermal Aging

KS C IEC 60216-4-3:2002 Electrical insulating materials－Thermal endurance properties－Part 4－3：Ageing ovens－Multi－chamber ovens
KS C IEC 60216-4-3:2018 Electrical insulating materials — Thermal endurance properties — Part 4-3: Ageing ovens — Multi-chamber ovens
KS C IEC 60216-1:2008 Electrical insulating materials－Properties of thermal endurance－Part 1：Ageing procedures and evaluation of test results
KS C IEC 60216-1:2019 Electrical insulating materials — Thermal endurance properties — Part 1: Ageing procedures and evaluation of test results
KS C IEC 60216-4-2-2002(2017) Electrical insulating materials－Thermal endurance properties－Part 4－2：Ageing ovens－Precision ovens for use up to 300 ℃
KS C IEC 60450-2008(2018) Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulation materials
KS C IEC 60450:2008 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulation materials
KS C IEC 60216-4-2:2002 Electrical insulating materials－Thermal endurance properties－Part 4－2：Ageing ovens－Precision ovens for use up to 300 ℃
KS C IEC 60216-4-1:2008 Guide for the determination of thermal endurance properties of electrical insulating materials－Part 4：Ageing ovens－Section 1：Single-chamber ovens
KS C IEC 60216-4-2-2002(2022) Electrical insulating materials－Thermal endurance properties－Part 4－2：Ageing ovens－Precision ovens for use up to 300 ℃
KS C IEC 60216-4-1-2008(2018) Guide for the determination of thermal endurance properties of electrical insulating materials－Part 4：Ageing ovens－Section 1：Single-chamber ovens
KS C IEC 61065-2014(2019) Method for evaluating the low temperature flow properties of mineral insulating oils after ageing
KS C IEC 60811-1-2:2002 Common test methods for insulating and sheathing materials of electric cables－Part 1：Methods for general application－Section 2：Thermal ageing methods
KS M ISO 11561:2009 Ageing of thermal insulation materials－Determination of the long-term change in thermal resistance of closed-cell plastics(accelerated laboratory test methods)
KS M ISO 11561-2009(2019) Ageing of thermal insulation materials－Determination of the long-term change in thermal resistance of closed-cell plastics(accelerated laboratory test methods)
KS C IEC 60811-412-2016(2021) Electric and optical fibre cables ― Test methods for non-metallic materials ― Part 412: Miscellaneous tests ― Thermal ageing methods ― Ageing in an air bomb
KS C IEC 60811-401:2020 Electric and optical fibre cables — Test methods for non-metallic materials — Part 401: Miscellaneous tests —Thermal ageing methods — Ageing in an air oven
KS C IEC 60811-412:2016 Electric and optical fibre cables ― Test methods for non-metallic materials ― Part 412: Miscellaneous tests ― Thermal ageing methods ― Ageing in an air bomb
KS C IEC 60811-1-2:2020 Common test methods for insulating and sheathing materials of electric cables — Part 1: Methods for general application —Section 2: Thermal ageing methods
KS M ISO 2951-2014(2019) Rubber, vulcanized or thermoplastic — Determination of insulation resistance
KS C IEC 61858-1:2017 Electrical insulation systems — Thermal evaluation of modifications to an established electrical insulation(EIS)— Part 1:Wire-wound winding EIS

Danish Standards Foundation, Insulation Electrical Aging Thermal Aging

DS/EN 60216-4-1:2006 Electrical insulating materials - Thermal endurance properties - Part 4-1: Ageing ovens - Single-chamber ovens
DS/EN 60216-4-3:2001 Electrical insulating materials - Thermal endurance properties - Part 4-3: Ageing ovens - Multi-chamber ovens
DS/EN 60216-1:2002 Electrical insulating materials - Properties of thermal endurance - Part 1: Ageing procedures and evaluation of test results
DS/EN 60216-1:2013 Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results
DS/EN 61065:1994 Method for evaluating the low temperature flow properties of mineral insulation oils after ageing
DS/IEC 216-4:1982 Guide for the determination of thermal endurance properties of electrical insulating materials. Part 4: Instruction for calculating the thermal endurance profile
DS/EN 60216-4-2:2001 Electrical insulating materials - Thermal endurance properties - Part 4-2: Ageing ovens - Precision ovens for use up to 300 °C
DS/EN 60544-5:2012 Electrical insulating materials - Determination of the effects of ionizing radiation - Part 5: Procedures for assessment of ageing in service
DS/EN 60450:2004 Measurement of the average viscometric degree of polymerisation of new and aged cellulosic electrically insulating materials
DS/IEC 216-1:1991 Guide for the determination of thermal endurance properties of electrical insulating materials. Part 1: General guidelines for ageing procedures and evaluation of test results
DS/EN 60811-412:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb
DS/EN 60811-401:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven
DS/ISO 2951:2012 Rubber, vulcanized or thermoplastic - Determination of insulation resistance

Professional Standard - Energy, Insulation Electrical Aging Thermal Aging

NB/T 42005-2013 Test method for thermal voltage-endurance testing on groundwall insulation of stator coil of high voltage AC machines
NB/T 42004-2013 Test method for voltage-endurance test on groundwall insulation of stator coil of high voltage AC machines
NB/T 20305-2014 Ageing management guideline for feeder pipe of pressurized heavy water nuclear power plants

Japanese Industrial Standards Committee (JISC), Insulation Electrical Aging Thermal Aging

JIS C 2143-4-3:2014 Electrical insulating materials.Thermal endurance properties.Part 4-3: Ageing ovens.Multi-chamber ovens
JIS C 2143-4-1:2014 Electrical insulating materials -- Thermal endurance properties -- Part 4-1: Ageing ovens -- Single-chamber ovens
JIS C 2143-1:2011 Electrical insulating materials -- Properties of thermal endurance -- Part 1: Ageing procedures and evaluation of test results
JIS C 2143-1:2015 Electrical insulating materials -- Thermal endurance properties -- Part 1: Ageing procedures and evaluation of test results
JIS C 2143-4-2:2014 Electrical insulating materials -- Thermal endurance properties -- Part 4-2: Ageing ovens -- Precision ovens for use up to 300 degree C
JIS C 3660-1-2:1998 Common test methods for insulating and sheathing materials of electric cables -- Part 1: Methods for general application -- Section 2: Thermal ageing methods
JIS C 3660-1-2:2003 Common test methods for insulating and sheathing materials of electric and optical cables -- Part 1-2: Methods for general application -- Thermal ageing methods

RU-GOST R, Insulation Electrical Aging Thermal Aging

GOST R IEC 811-1-2-1994 Common test methods for insulating and sheathing materials of electric cables. Termal ageing methods
GOST 27905.2-1988 Electrical insulation systems. Evaluation of performances evaluation, ageing mechanism, diagnostic procedures
GOST IEC 60811-1-2-2011 Common test methods for insulating and sheathing materials of electric and optical cables. Part 1-2. Methods for general application. Thermal ageing methods
GOST IEC 60811-401-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 401. Miscellaneous tests. Thermal ageing methods. Ageing in an air oven
GOST IEC 60811-412-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 412. Miscellaneous tests. Thermal ageing methods. Ageing in an air bomb
GOST R IEC 60811-1-2-2006 Common test methods for insulating and sheathing materials of electric and optical cables. Part 1-2. Methods for general application. Thermal ageing methods
GOST R 56773-2015 Composites. Method of accelerated ageining tests of absorptive electrochromic coatings on sealed insulating glass units

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Insulation Electrical Aging Thermal Aging

GB/T 11026.6-2010 Electrial insulating materials.Thermal endurance properties.Part 6:Ageing ovens.Multi-chamber ovens
GB/T 11026.4-2012 Electrical insulating materials.Thermal endurance properties.Part 4:Ageing ovens.Single-chamber ovens
GB/T 11026.1-2003 Electrical insulating materials-Properties of thermal endurance-Part 1:Ageing procedures and evaluation of test results
GB/T 11026.1-2016 Heat resistance of electrical insulating materials - Part 1: Aging procedures and evaluation of test results
GB/T 11026.4-1999 Guide for the determination of thermal endurance properties of electrical insulating materials-Part 4: Ageing ovens-Single-chamber ovens
GB/T 11026.5-2010 Electrical insulating materials.Thermal endurance properties.Part 5:Ageing ovens.Precision ovens for use up to 300℃
GB/T 29305-2012 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials
GB/T 22566.1-2008 Electrical stresses induced by repetitive pulses in electrical insulation systems - Part 1: General method for electrical aging assessment
GB/T 26168.4-2010 Electrical insulating materials.Determination of the effects of ionizing radiation.Part 4:Procedures for assessment of ageing in service
GB/T 26168.4-2018 Electrical insulating materials.Determination of the effects of ionizing radiation.Part 4:Procedures for assessment of ageing in service
GB/T 2951.2-1997 Common test methods for insulating and sheating materials of electric cables. Part 1: Methods for general application. Section two: Thermal ageing methods
GB/T 2951.12-2008 Common test methods for insulating and sheathing materials of electric and optical cables.Part 12:Methods for general application.Thermal ageing methods
GB/T 11026.1-1989 Guide for the determination of thermal endurance properties of electrical insulating materials--Part 1:General guidelines for ageing procedures and evaluation of test results

Professional Standard - Machinery, Insulation Electrical Aging Thermal Aging

JB/T 1544-2015 Rapid test procedure for thermal endurance of electrical insulating impregnting varnishes and varnished fabrics.Thermogravameric point slope(TPS) method
JB/T 1544-1999 Rapid test procedure for thermal endurance of electrical insulating impregnating varnishes and varnished fabrics-thermogravameric point slope (TPS)method

AENOR, Insulation Electrical Aging Thermal Aging

UNE-EN 60216-4-3:2001 Electrical insulating materials - Thermal endurance properties. Part 4-3: Ageing ovens - Multi-chamber ovens.
UNE-EN 60216-4-2:2001 Electrical insulating materials - Thermal endurance properties -- Part 4-2: Ageing ovens - Precision ovens for use up to 300 °C.
UNE-EN 61065:1996 METHOD FOR EVALUATING THE LOW TEMPERATURE FLOW PROPERTIES OF MINERAL INSULATING OILS AFTER AGEING.
UNE-EN 60811-412:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb
UNE-EN 60811-401:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven

KR-KS, Insulation Electrical Aging Thermal Aging

KS C IEC 60216-4-3-2018 Electrical insulating materials — Thermal endurance properties — Part 4-3: Ageing ovens — Multi-chamber ovens
KS C IEC 60216-1-2019 Electrical insulating materials — Thermal endurance properties — Part 1: Ageing procedures and evaluation of test results
KS C IEC 60811-401-2020 Electric and optical fibre cables — Test methods for non-metallic materials — Part 401: Miscellaneous tests —Thermal ageing methods — Ageing in an air oven
KS C IEC 60811-412-2016 Electric and optical fibre cables ― Test methods for non-metallic materials ― Part 412: Miscellaneous tests ― Thermal ageing methods ― Ageing in an air bomb
KS C IEC 60811-1-2-2020 Common test methods for insulating and sheathing materials of electric cables — Part 1: Methods for general application —Section 2: Thermal ageing methods

Professional Standard - Electricity, Insulation Electrical Aging Thermal Aging

DL/T 984-2005 Guide for the diagnosis of insulation aging in oil-immersed power transformer
DL/T 984-2018 Guidelines for judging insulation aging of oil-immersed transformers
DL/T 492-2009 Guide for aging appraise of generator stator winding insulation with epoxy mica
DL/T 492-1992 Guiding principle for appraising aging of epoxy mica insulation for generator stator

未注明发布机构, Insulation Electrical Aging Thermal Aging

DIN EN 60811-1-2-DIN VDE 0473 Teil 811-1-2:2001 Insulating and sheathing materials for cables and insulated lines General test methods Part 1: General application – Main section 2: Thermal aging
BS EN 60450:2004(2007) Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials
BS EN 60811-1-2:1995(2002) Common test methods for insulating and sheathing materials of electric and optical cables — Part 1 - 2 : General application — Thermal ageing methods
BS ISO 11561:1999(2000) Ageing of thermal insulation materials — Determination of the long - term change in thermal resistance of closed - cell plastics (accelerated laboratory test methods)

IN-BIS, Insulation Electrical Aging Thermal Aging

International Electrotechnical Commission (IEC), Insulation Electrical Aging Thermal Aging

IEC 60216-4-3:2000 Electrical insulating materials - Thermal endurance properties - Part 4-3: Ageing ovens - Multi-chamber ovens
IEC 60216-4-1:2006 Electrical insulating materials - Thermal endurance properties - Part 4-1: Ageing ovens - Single-chamber ovens
IEC 60216-1:2013 Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results
IEC 60216-1:2001 Electrical insulating materials - Properties of thermal endurance - Part 1: Ageing procedures and evaluation of test results
IEC 60216-4-2:2000 Electrical insulating materials - Thermal endurance porperties - Part 4-2: Ageing ovens; Precision ovens for use up to 300 °C
IEC 60450:2004/AMD1:2007 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials; Amendment 1
IEC 61065:1991/COR1:1993 Method for evaluating the low temperature flow properties of mineral insulating oils after ageing
IEC 61065:1991 Method for evaluating the low temperature flow properties of mineral insulating oils after ageing
IEC 60610:1978 Principal aspects of functional evaluation of electrical insulation systems; Ageing mechanisms and diagnostic procedures
IEC 60450:2007 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials
IEC 60216-4-1:1990 Guide for the determination of thermal endurance properties of electrical insulating materials; part 4: ageing ovens; section 1: single-chamber ovens
IEC 60450:2004 Measurement of the average viscometric degree of polymerisation of new and aged cellulosic electrically insulating materials
IEC 60450:2004+AMD1:2007 CSV Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials
IEC 60544-5:2022 Electrical insulating materials - Determination of the effects of ionizing radiation - Part 5: Procedures for assessment of ageing in service
IEC 60544-5:2022 RLV Electrical insulating materials - Determination of the effects of ionizing radiation - Part 5: Procedures for assessment of ageing in service
IEC 60216-1:1990 Guide for the determination of thermal endurance properties of electrical insulating materials; part 1: general guidelines for ageing procedures and evaluation of test results
IEC 60811-401:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven
IEC 60811-401:2017 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven
IEC 60811-1-2:1985 Common test methods for insulating and sheathing materials of electric cables; part 1: methods for general application; section two: thermal ageing methods
IEC 60811-412:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb
IEC 60544-5:2003 Electrical insulating materials - Determination of the effects of ionizing radiation - Part 5: Procedures for assessment of ageing in service
IEC 60544-5:2011 Electrical insulating materials - Determination of the effects of ionizing radiation - Part 5: Procedures for assessment of ageing in service
IEC 60811-401:2012+AMD1:2017 CSV Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven
IEC 60811-401:2012/AMD1:2017 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven; Amendment 1
IEC 60811-1-2:1985/AMD1:1989 Common test methods for insulating and sheathing materials of electric cables; part 1: methods for general application; section two: thermal ageing methods; amendment No. 1 to IEC 60811-1-2:1985
IEC 60811-1-2/COR1:1986 Common test methods for insulating and sheathing materials of electric cables - Part 1: Methods for general application - Section 2: Thermal ageing methods; Corrigendum 1
IEC 60811-1-2:1985/AMD2:2000 Common tests methods for insulating and sheathing materials of electric and optical cables - Part 1-2: Methods for general application; Thermal ageing methods; Amendment 2

American Society for Testing and Materials (ASTM), Insulation Electrical Aging Thermal Aging

ASTM D1934-95(2005) Standard Test Method for Oxidative Aging of Electrical Insulating Petroleum Oils by Open-Beaker Method
ASTM D3251-99 Standard Test Method for Thermal-Aging Characteristics of Electrical Insulating Varnishes Applied Over Film-Insulated Magnet Wire
ASTM D1934-20 Standard Test Method for Oxidative Aging of Electrical Insulating Liquids by Open-Beaker Method
ASTM C1488-01 Standard Practice for Simulated Aging of Loose-Fill Insulation
ASTM D1934-95(2000) Standard Test Method for Oxidative Aging of Electrical Insulating Petroleum Oils by Open-Beaker Method
ASTM D1934-95(2012) Standard Test Method for Oxidative Aging of Electrical Insulating Petroleum Oils by Open-Beaker Method
ASTM E773-97 Standard Test Method for Accelerated Weathering of Sealed Insulating Glass Units
ASTM E773-01 Standard Test Method for Accelerated Weathering of Sealed Insulating Glass Units
ASTM E773-88 Standard Test Methods for Seal Durability of Sealed Insulating Glass Units
ASTM C1488-04 Standard Practice for Simulated Aging of Cellulosic Loose-Fill Insulation
ASTM C1488-04e1 Standard Practice for Simulated Aging of Cellulosic Loose-Fill Insulation
ASTM E2141-21 Standard Test Method for Accelerated Aging of Electrochromic Devices in Sealed Insulating Glass Units
ASTM E2141-14 Standard Test Method for Accelerated Aging of Electrochromic Devices in Sealed Insulating Glass Units
ASTM D1698-97 Standard Test Method for Sediments and Soluble Sludge in Service-Aged Insulating Oils
ASTM D16-08 Standard Terminology for Paint, Related Coatings, Materials, and Applications
ASTM D4243-99(2009) Standard Test Method for Measurement of Average Viscometric Degree of Polymerization of New and Aged Electrical Papers and Boards
ASTM D1698-03 Standard Test Method for Sediments and Soluble Sludge in Service-Aged Insulating Oils
ASTM D1698-03(2008) Standard Test Method for Sediments and Soluble Sludge in Service-Aged Insulating Oils
ASTM E2953-14(2020)e1 Standard Specification for Evaluating Accelerated Aging Performance of Electrochromic Devices in Sealed Insulating Glass Units
ASTM E2953-14 Standard Specification for Evaluating Accelerated Aging Performance of Electrochromic Devices in Sealed Insulating Glass Units
ASTM D4243-99(2004)e1 Standard Test Method for Measurement of Average Viscometric Degree of Polymerization of New and Aged Electrical Papers and Boards
ASTM D4243-99 Standard Test Method for Measurement of Average Viscometric Degree of Polymerization of New and Aged Electrical Papers and Boards

RO-ASRO, Insulation Electrical Aging Thermal Aging

STAS 10514/1-1991 DETERMINATION OF THERMAL RNDURANCE PROFERTIES OF ELECTRICAL INSULATING MATERIALS General guidelines for ageing and evaluation of test results
STAS 11388/2-1983 GABLES AND CORDS METHODS OF TEST Thermal aging
STAS 5162/4-1973 CABLES WITH THERMOPLASTIC MATERIAL, ELASTOMERE AND NATURAL RUBBER INSULATION AND SHEATH Methods of acceleiated aging

CENELEC - European Committee for Electrotechnical Standardization, Insulation Electrical Aging Thermal Aging

EN 60216-1:2001 Electrical Insulating Materials - Properties of Thermal Endurance Part 1: Ageing Procedures and Evaluation of Test Results
EN 60216-1:2013 Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results
EN 60544-5:2003 Electrical insulating materials Determination of the effects of ionizing radiation Part 5: Procedures for assessment of ageing in service
EN 60811-1-2:1995 Insulating and Sheathing Materials of Electric Cables Common Test Methods Part 1: General Application Section 2: Thermal Ageing Methods

ES-UNE, Insulation Electrical Aging Thermal Aging

UNE-EN 60216-1:2013 Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results (Endorsed by AENOR in October of 2013.)
UNE-EN 60216-4-1:2006 Electrical insulating materials - Thermal endurance properties -- Part 4-1: Ageing ovens - Single-chamber ovens (IEC 60216-4-1:2006). (Endorsed by AENOR in August of 2006.)
UNE-EN IEC 60544-5:2022 Electrical insulating materials - Determination of the effects of ionizing radiation - Part 5: Procedures for assessment of ageing in service (Endorsed by Asociación Española de Normalización in October of 2022.)
UNE-EN 60544-5:2012 Electrical insulating materials - Determination of the effects of ionizing radiation - Part 5: Procedures for assessment of ageing in service (Endorsed by AENOR in July of 2012.)
UNE-EN 60811-401:2012/A1:2018 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven

Institute of Electrical and Electronics Engineers (IEEE), Insulation Electrical Aging Thermal Aging

IEEE 943-1986 Guide for aging mechanisms and diagnostic procedures in evaluating electrical insulation systems
IEEE 775-1993 Guide for designing multistress aging tests of electrical insulation in a radiation environment
IEEE Std 775-1993 IEEE Guide for Designing Multistress Aging Tests of Electrical Insulation in a Radiation Environment
ANSI/IEEE Std 943-1986 IEEE Guide for Aging Mechanisms and Diagnostic Procedures in Evaluating Electrical Insulation Systems
IEEE 1205/COR 1-2006 Assessing, monitoring, and mitigating aging effects on class 1E equipment used in nuclear power generating stations - Corrigendum 1: Thermal aging model; Corrections
IEEE Std P1205-Corrigendum1, Dec 2006 IEEE Guide for Assessing, Monitoring, and Mitigating Aging Effects on Class 1E Equipment Used in Nuclear Power Generating Stations - Corrigendum 1: Thermal Aging Model Corrections
IEEE Std 1205-2000/COR 1-2006 IEEE Guide for Assessing, Monitoring, and Mitigating Aging Effects on Class 1E Equipment Used in Nuclear Power Generating Stations - Corrigendum 1: Thermal Aging Model Corrections
IEEE 1205-2000/Cor 1-2006 IEEE Guide for Assessing, Monitoring, and Mitigating Aging Effects on Class 1E Equipment Used in Nuclear Power Generating Stations - Corrigendum 1: Thermal Aging Model Corrections
IEEE Std 1205-2000/Cor 1-2006 (Corrigendum to IEEE Std 1205-2000) IEEE Guide for Assessing, Monitoring, and Mitigating Aging Effects on Class 1E Equipment Used in Nuclear Power Generating Stations - Corrigendum 1: Thermal Aging Model Corrections

Lithuanian Standards Office , Insulation Electrical Aging Thermal Aging

LST EN 60216-4-3-2002 Electrical insulating materials. Thermal endurance properties. Part 4-3: Ageing ovens. Multi-chamber ovens (IEC 60216-4-3:2000)
LST EN 60216-4-1-2006 Electrical insulating materials - Thermal endurance properties -- Part 4-1: Ageing ovens - Single-chamber ovens (IEC 60216-4-1:2006)
LST EN 60216-1-2002 Electrical insulating materials. Properties of thermal endurance. Part 1: Ageing procedures and evaluation of test results (IEC 60216-1:2001)
LST EN 60216-1-2013 Electrical insulating materials - Thermal endurance properties -- Part 1: Ageing procedures and evaluation of test results (IEC 60216-1:2013)
LST EN 61065-2001 Method for evaluating the low temperature flow properties of mineral insulating oils after ageing (IEC 61065:1991)
LST EN 60216-4-2-2002 Electrical insulating materials. Thermal endurance properties. Part 4-2: Ageing ovens. Precision ovens for use up to 300 °C (IEC 60216-4-2:2000)
LST EN 60544-5-2012 Electrical insulating materials - Determination of the effects of ionizing radiation -- Part 5: Procedures for assessment of ageing in service (IEC 60544-5:2011)
LST EN 60811-412-2012 Electric and optical fibre cables - Test methods for non-metallic materials -- Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb (IEC 60811-412:2012)
LST EN 60811-401-2012 Electric and optical fibre cables - Test methods for non-metallic materials -- Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven (IEC 60811-401:2012)

YU-JUS, Insulation Electrical Aging Thermal Aging

JUS N.A5.200-1979 Ageing testing of electrical insulating materials. Statistical analysis ofageing test data. Methods based on mean values ofnormally distributed test results

SE-SIS, Insulation Electrical Aging Thermal Aging

SIS SS IEC 450:1983 Measurement ofthe average viscometric degree of polymerization of new and aged electrical papers

European Committee for Standardization (CEN), Insulation Electrical Aging Thermal Aging

HD 611.4.1 S1-1992 Guide for the determination of thermal endurance properties of electrical insulating materials; part 4: ageing ovens; section 1: single-chamber ovens (IEC 216-4-1:1990)
prEN 61065-1992 Method for evaluating the low temperature flow properties of mineral insulating oils after ageing (IEC 1065:1991)
prEN ISO 18393-1 Thermal insulation products - Determination of ageing by settlement - Part 1: Blown loose fill insulation for ventilated attics simulating humidity and temperature cycling (ISO/DIS 18393-1:2022)
EN 4057-306:2006 Aerospace series - Cable ties for harnesses - Test methods - Part 306: Heat ageing test

ZA-SANS, Insulation Electrical Aging Thermal Aging

SANS 6284-5:2007 Test methods for cross-linked polyethylene (XLPE) insulated electric cables Part 5: Ageing tests
SANS 60811-1-2:1985 Common test methods for insulating and sheathing materials of electric and optical cables Part 1: Methods for general application Section 2: Thermal ageing methods

Group Standards of the People's Republic of China, Insulation Electrical Aging Thermal Aging

T/CEC 439-2021 35kV and below XLPE power cable water tree aging insulation repair technical guidelines
T/CEC 405-2020 On-site Detection Method of Laser Raman Spectroscopy for Aging Signatures in Mineral Insulating Oil
T/ZNL 001-2021 The detection method for anti-thermal aging performance of electric vehicle charging cable Thermogravimetric analysis
T/CEC 621.1-2022 Aging evaluation and repair technology of silicone rubber for external insulation of power system Part 1: Technical conditions of silicone rubber cleaning and repairing agent

International Organization for Standardization (ISO), Insulation Electrical Aging Thermal Aging

ISO 18393-1:2012 Thermal insulation products - Determination of ageing by settlement - Part 1: Blown loose-fill insulation for ventilated attics
ISO 11561:1999 Ageing of thermal insulation materials - Determination of the long-term change in thermal resistance of closed-cell plastics (accelerated laboratory test methods)
ISO/DIS 18393-1 Thermal insulation products — Determination of ageing by settlement — Part 1: Blown loose fill insulation for ventilated attics simulating humidity and temperature cycling
ISO/FDIS 18393-1:2023 Thermal insulation products — Determination of ageing by settlement — Part 1: Blown loose fill insulation for ventilated attics simulating humidity and temperature cycling
ISO 2951:2012 Rubber, vulcanized or thermoplastic - Determination of insulation resistance

BE-NBN, Insulation Electrical Aging Thermal Aging

NBN C 30-811-1-2-1992 COMMON TEST METHODS FOR INSULATING AND SHEATING MATERIALS OF ELECTRIC CABLES Part 1 : Methods for general application Section Two - Thermal ageing methods

NL-NEN, Insulation Electrical Aging Thermal Aging

NEN 11065-1993 Mineral insulating oils. Method for evaluating the low temperature flow properties after ageing (IEC 1065:1991)

ES-AENOR, Insulation Electrical Aging Thermal Aging

UNE 21-170 Pt.1-2-1990

CZ-CSN, Insulation Electrical Aging Thermal Aging

CSN 34 6422-1961 Tests of thermal aging of varnished wires on basis of decrease of electric strength of lacquer film

VN-TCVN, Insulation Electrical Aging Thermal Aging

TCVN 6614-1-2-2008 Common test methods for insulating and sheathing materials of electric cables and optical cables.Part 1-2: Methods for general application.Thermal ageing methods

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Insulation Electrical Aging Thermal Aging

IEEE 1205-2006 Guide for Assessing@ Monitoring@ and Mitigating Aging Effects on Class 1E Equipment Used in Nuclear Power Generating Stations Corrigendum 1: Thermal Aging Model Corrections

Indonesia Standards, Insulation Electrical Aging Thermal Aging

SNI 04-6190.1.2-2001 Common test methods for insulating and sheathing materials of electric cables. Part 1: Methods for general application - Section 2: Thermal ageing methods

Military Standard of the People's Republic of China-General Armament Department, Insulation Electrical Aging Thermal Aging

GJB 7282-2011 Specification for chlorinated polyolefin heat-shrinkable electrical insulation sleeving

Professional Standard - Coal, Insulation Electrical Aging Thermal Aging

MT/T 848.1-2000 Vulcanizing repair tape for rubber sheathed mining cables.Part 1:Rubber insulation repair tape

国家煤炭工业局, Insulation Electrical Aging Thermal Aging

MT 848.1-2000 Rubber sheathed cable vulcanized hot patch tape for coal mines Part 1: Rubber insulated vulcanized hot patch tape

SAE - SAE International, Insulation Electrical Aging Thermal Aging

SAE AS23053/11-2016 INSULATION SLEEVING@ ELECTRICAL@ HEAT-SHRINKABLE FLUORINATED ETHYLENE PROPYLENE@ NON-CROSSLINKED
SAE AS23053/1-2016 INSULATION SLEEVING@ ELECTRICAL@ HEAT SHRINKABLE@ CROSSLINKED CHLORINATED POLYOLEFIN@ FLEXIBLE
SAE AS23053/1A-2018 INSULATION SLEEVING@ ELECTRICAL@ HEAT SHRINKABLE@ CROSSLINKED CHLORINATED POLYOLEFIN@ FLEXIBLE
SAE AMS-DTL-23053/1B-2018 Insulation Sleeving@ Electrical@ Heat Shrinkable@ Crosslinked Chlorinated Polyolefin@ Flexible
SAE AMS-DTL-23053/11B-2018 Insulation Sleeving@ Electrical@ Heat Shrinkable@ Fluorinated Ethylene Propylene@ Non-Crosslinked

Society of Automotive Engineers (SAE), Insulation Electrical Aging Thermal Aging

SAE AMS-DTL-23053/1A-2012 Insulation Sleeving, Electrical, Heat Shrinkable, Crosslinked Chlorinated Polyolefin, Flexible
SAE AS23053/11A-2018 INSULATION SLEEVING, ELECTRICAL, HEAT-SHRINKABLE FLUORINATED ETHYLENE PROPYLENE, NON-CROSSLINKED
SAE AS23053/11B-2022 INSULATION SLEEVING, ELECTRICAL, HEAT-SHRINKABLE FLUORINATED ETHYLENE PROPYLENE, NON-CROSSLINKED
SAE AMS4965K-2011 Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0Al 4.0V Solution Heat Treated and Aged
SAE AMS4965L-2014 Titanium Alloy, Bars, Wire, Forgings, and Rings, 6.0AI - 4.0V, Solution Heat Treated and Aged