ZH
RU
ES

Detection of combustible and organic gases

Detection of combustible and organic gases, Total:451 items.

In the international standard classification, Detection of combustible and organic gases involves: Occupational safety. Industrial hygiene, Electrical and electronic testing, Industrial automation systems, Linear and angular measurements, Alarm and warning systems, Electrical equipment for working in special conditions, Electromagnetic compatibility (EMC), Fuels, Semiconductor devices, Explosion protection, Protective equipment, Air quality, Mining equipment, Analytical chemistry, Accident and disaster control, Measurement of volume, mass, density, viscosity, Measurement of fluid flow, Products of the chemical industry, Protection against fire, Burners. Boilers, Internal combustion engines, Fluid storage devices, Metrology and measurement in general, Valves, Coals, Vocabularies, Electrical engineering in general, Crude petroleum, Shipbuilding and marine structures in general, Small craft, Pipeline components and pipelines, Installations in buildings, Rubber and plastics products, Mechanical structures for electronic equipment, Vibrations, shock and vibration measurements, Gas and steam turbines. Steam engines, Insulating fluids, Power transmission and distribution networks, Road vehicle systems, Water quality, Soil quality. Pedology, Heat pumps, Electrical wires and cables, Natural gas.


Henan Provincial Standard of the People's Republic of China, Detection of combustible and organic gases

  • DB41/T 1522-2018 Technical specification for inspection and detection of flammable and toxic gas alarms
  • DB4102/T 014-2020 Installation and use requirements for combustible gas detection and alarm

Heilongjiang Provincial Standard of the People's Republic of China, Detection of combustible and organic gases

  • DB23/T 1802-2016 Technical specification for detection of combustible gas and toxic gas alarm system

Association Francaise de Normalisation, Detection of combustible and organic gases

  • NF EN 50270:2015 Compatibilité électromagnétique - Appareils de détection et de mesure de gaz combustible, de gaz toxique et d'oxygène
  • NF C23-570:2000 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen.
  • NF C23-596*NF EN 50402:2017 Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen - Requirements on the functional safety of gas detection systems
  • NF EN 50402:2017 Matériel électrique pour la détection et la mesure des gaz ou vapeurs combustibles ou toxiques ou de l'oxygène - Exigences relatives à la sécurité fonctionnelle des systèmes de détection de gaz
  • NF C23-571:2010 Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies.
  • NF C23-541-2:2005 Specification for open path apparatus for the detection of combustible or toxic gases and vapours - Part 2 : performance requirements for apparatus for the detection of combustible gases.
  • NF C23-571*NF EN 50271:2018 Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies
  • NF EN 50271:2018 Appareils électriques de détection et de mesure des gaz combustibles, des gaz toxiques ou de l'oxygène - Exigences et essais pour les appareils utilisant un logiciel et/ou des technologies numériques
  • NF C23-570:2007 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen.
  • NF C23-570*NF EN 50270:2015 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
  • NF EN 50545-1/A1:2016 Appareil électrique de détection et de mesure de gaz combustible et toxique dans les parcs de stationnement et les tunnels - Partie 1 : exigences de performance générales et méthodes pour la détection et la mesure du monoxyde de carbone et d'oxy...
  • NF EN 50545-1:2012 Appareil électrique de détection de mesure de gaz combustible et toxique dans les parcs de stationnement et les tunnels - Partie 1 : exigences de performance générales et méthodes pour la détection et la mesure du monoxyde de carbone et d'oxyde ...
  • NF E29-645-2:1997 Transportable gas cylinders. Gases and gas mixtures. Part 2 : determination of flammability and oxidizing ability of gases and gas mixtures.
  • NF C23-544*NF EN 50244:2016 Electrical apparatus for the detection of combustible gases in domestic premises - Guide on the selection, installation, use and maintenance
  • NF C23-560-1/A11:2005 Electrical apparatus for the detection and measurement of flammable gases - Part 1 : general requirements and test methods.
  • NF C23-560-1:2005 Electrical apparatus for the detection and measurement of flammable gases - Part 1 : general requirements and test methods.
  • NF C23-560-5:2005 Electrical apparatus for the detection and measurement of flammable gases - Part 5 : performance requirements for group II apparatus indicating a volume fraction up to 100 % gas.
  • NF C23-558:1992 Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for group II apparatus indicating up to 100 per cent (V/V) gas.
  • NF EN 50194-1:2009 Matériels électriques pour la détection des gaz combustibles dans les locaux à usage domestique - Partie 1 : méthodes d'essai et exigences d'aptitude à la fonction
  • NF D36-510:1994 Automatic gas burner control systems for gas burnes and gas burning appliances with or without fans.
  • NF EN 50244:2016 Appareils électriques pour la détection des gaz combustibles dans les locaux à usage domestique - Guide de sélection, d'installation, d'utilisation et de maintenance
  • NF E29-743*NF EN ISO 7866:2012 Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing
  • NF C23-596:2005 Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen - Requirements on the functional safety of fixed gas detection systems.
  • NF C23-579-29-2*NF EN 60079-29-2:2018 Explosive atmospheres - Part 29-2 : gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen
  • NF EN 60079-29-2:2018 Atmosphères explosives Partie 29-2 : détecteurs de gaz - Sélection, installation, utilisation et maintenance des détecteurs de gaz inflammables et d'oxygène
  • NF C23-579-29-2:2008 Explosive atmospheres - Part 29-2 : gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen.
  • NF C23-557:1992 Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for group II apparatus indicating up to 100 per cent lower explosive limit.
  • NF C23-596/A1:2008 Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen - Requirements on the functional safety of fixed gas detection systems.
  • NF C23-504-1/A1*NF EN 50545-1/A1:2016 Electrical apparatus for the detection and measurement of toxic and combustible gases in car parks and tunnels - Part 1 : general performance requirements and test methods for the detection and measurement of carbon monoxide and nitrogen oxides
  • NF C23-541-1/A1:2005 Specification for open path apparatus for the detection of combustible or toxic gases and vapours - Part 1 : general requirements and test methods.
  • NF C23-541-1:2005 Specification for open path apparatus for the detection of combustible or toxic gases and vapours - Part 1 : general requirements and test methods.
  • NF C23-560-2:2005 Electrical apparatus for the detection and measurement of flammable gases - Part 2 : performance requirements for group I apparatus indicating a volume fraction up to 5 % methane in air.
  • NF C23-560-3:2005 Electrical apparatus for the detection and measurement of flammable gases - Part 3 : performance requirements for group I apparatus indicating a volume fraction up to 100 % methane in air.
  • NF C23-504-1*NF EN 50545-1:2012 Electrical apparatus for the detection and measurement of toxic and combustible gases in car parks and tunnels - Part 1 : general performance requirements and test methods for the detection and measurement of carbon monoxide and nitrogen oxides.
  • NF X43-246-3*NF EN 45544-3:2015 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 3 : performance requirements for apparatus used for general gas detection
  • NF EN 16340:2014 Dispositifs de commande et de sécurité pour brûleurs et appareils utilisant des combustibles gazeux ou liquides - Dispositifs de détection des produits de combustion
  • NF T54-069:1988 PLASTICS. MECHANICAL UNIONS FOR POLYETHYLENE DISTRIBUTION NETWORKS FOR GASEOUS COMBUSTIBLE. SPECIFICATIONS AND TEST METHODS.
  • NF EN 13631-16:2005 Explosifs à usage civil - Explosifs - Partie 16 : détection et mesurage des gaz toxiques
  • NF C23-560-4:2005 Electrical apparatus for the detection and measurement of flammable gases - Part 4 : performance requirements for group II apparatus indicating a volume fraction up to 100 % lower explosive limit.
  • NF C23-594-1*NF EN 50194-1:2009 Electrical apparatus for the detection of combustible gases in domestic premises - Part 1 : test methods and performance requirements
  • NF ISO 8178-2:2022 Moteurs alternatifs à combustion interne - Mesurage des émissions de gaz d'échappement - Partie 2 : mesurage des émissions de gaz et de particules sur site
  • NF EN 16617:2015 Tuyauterie - Tuyaux flexibles métalliques onduleux pour les gaz combustibles - Exigences de performances, essais et marquage
  • NF EN 50194-2:2019 Matériels électriques pour la détection des gaz combustibles dans les locaux à usage domestique - Partie 2 : matériels électriques en fonctionnement continu et en installation fixe dans les véhicules de loisir et locaux similaires - Méthodes d...
  • NF E37-211-2*NF ISO 8178-2:2022 Reciprocating internal combustion engines - Exhaust emission measurement - Part 2 : measurement of gaseous and particulate exhaust emissions under field conditions
  • NF EN 14624:2020 Performances des détecteurs de fuites portables et des détecteurs de gaz fixes pour tous les fluides frigorigènes
  • NF EN 60749-21:2012 Dispositifs à semiconducteurs - Méthodes d'essais mécaniques et climatiques - Partie 21 : brasabilité
  • NF E37-211-2:1996 Reciprocating internal combustion engines. Exhaust emission measurement. Part 2 : measurement of gaseous and particulate exhaust emissions at site.
  • NF E37-211-1:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1 : test-bed measurement of gaseous and particulate exhaust emissions.
  • NF E37-211-1:1997 Reciprocating internal combustion engines. Exhaust emission measurement. Part 1 : test-bed measurement of gaseous and particulate exhaust emissions.
  • NF ISO 8178-1:2020 Moteurs alternatifs à combustion interne - Mesurage des émissions de gaz d'échappement - Partie 1 : mesurage des émissions de gaz et de particules au banc d'essai
  • NF EN 60749-32/A1:2011 Dispositifs à semiconducteurs - Méthodes d'essais mécaniques et climatiques - Partie 32 : inflammabilité des dispositifs à encapsulation plastique (cas d'une cause extérieure d'inflammation)
  • NF EN 60749-32:2003 Dispositifs à semiconducteurs - Méthodes d'essais mécaniques et climatiques - Partie 32 : inflammabilité des dispositifs à encapsulation plastique (cas d'une cause extérieure d'inflammation)
  • NF C96-022-39*NF EN 60749-39:2006 Semiconductor devices - Mechanical and climatic test methods - Part 39 : measurement of moisture diffusivity and water solubility in organic materials used for semiconductor components
  • NF E35-422*NF EN 14624:2020 Performance of portable locating leak detectors and of fixed gas detectors for all refrigerants
  • NF E37-211-1*NF ISO 8178-1:2020 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1 : test-bed measurement systems of gaseous and particulate emissions
  • NF S62-003:1991 Explosion protection systems. Part 3 : determination of explosion indices of fuel/air mixtures other than dust/air and gas/air mixtures.
  • NF C32-074-22:2000 Common test methods for cables under fire conditions - Test on gas evolved during combustion of materials from cables - Part 2-2 : procedures - Determination of degree of acidity of gases for materials by measuring pH and conductivity.

Hebei Provincial Standard of the People's Republic of China, Detection of combustible and organic gases

  • DB13/T 2518-2017 Specifications for inspection and testing of combustible gas and toxic gas detection and alarm systems in industrial enterprises

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Detection of combustible and organic gases

  • GB 50493-2009 Specification for design of combustible gas and toxic gas detection and alarm for petrochemical industry
  • GB/T 50493-2019 Petrochemical industry combustible gas and toxic gas detection alarm design standards
  • GB/T 26073-2010 Safety guideline for the evaluation of toxic and flammable gas detection systems
  • GB 15322-1994 Technical requirements and test methods for combustible gas detectors
  • GB 20936.1-2007 Electrical apparatus for the detection and measurement of flammable gases- Part 1: General requirement and test methods
  • GB/T 20936.1-2007 Electrical apparatus for the detection and measurement of flammable gases—Part 1:General requirement and test methods
  • GB/T 20800.1-2006 Electrical apparatus for explosive gas atmosphere--Part 9: Encapsulation
  • GB 20800.1-2006 General rules of explosion-protect techniques of reciprocating internal combustion engines for explosive atmospheres Part 1: Group Ⅱ engines for use in flammable gas and vapor atmospheres

British Standards Institution (BSI), Detection of combustible and organic gases

  • BS EN 50270:2007 Electromagnetic compatibility. Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
  • BS EN 50270:1999 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
  • BS EN 50241-2:1999 Specification for open path apparatus for the detection of combustible or toxic gases and vapours - Performance requirements for apparatus for the detection of combustible gases
  • 19/30398559 DC BS EN 50270. Electromagnetic compatibility. Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
  • BS EN 50402:2017 Tracked Changes. Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen. Requirements on the functional safety of gas detection systems
  • BS EN 50270:2006 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
  • BS EN 50270:2015 Electromagnetic compatibility. Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
  • BS EN 50271:2002 Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies
  • BS EN 50271:2018 Tracked Changes. Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen. Requirements and tests for apparatus using software and/or digital technologies
  • BS EN 50054:1991 Electrical apparatus for the detection and measurement of combustible gases. General requirements and test methods
  • BS EN 50054:1999 Electrical apparatus for the detection and measurement of combustible gases. General requirements and test methods
  • BS 6020-1:1981 Instruments for the detection of combustible gases - Specification for general requirements and test methods
  • BS EN 61779-1:2000 Electrical apparatus for the detection and measurement of flammable gases - General requirements and test methods
  • BS EN 50241-1:1999 Specification for open path apparatus for the detection of combustible or toxic gases and vapours - General requirements and test methods
  • BS 6020-5:1982 Instruments for the detection of combustible gases - Specification for performance requirements for Group II instruments reading up to 100% gas
  • BS EN 50058:1999 Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for Group II apparatus indicating up to 100% (V/V) gas
  • BS EN 50058:1991 Specification for electrical apparatus for the detection and measurement of combustible gases. Performance requirements for Group II apparatus indicating up to 100 % (V/V) gas
  • BS EN 50194:2000 Electrical apparatus for the detection of combustible gases in domestic premises. Test methods and performance requirements
  • BS EN 60079-29-2:2015 Tracked Changes. Explosive atmospheres. Gas detectors. Selection, installation, use and maintenance of detectors for flammable gases and oxygen
  • BS EN 61779-5:2000 Electrical apparatus for the detection and measurement of flammable gases - Performance requirements for group II apparatus indicating a volume fraction up to 100% gas
  • BS EN 50271:2010 Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen. Requirements and tests for apparatus using software and/or digital technologies
  • BS EN 50402:2005 Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen - Requirements on the functional safety of fixed gas detection systems
  • BS EN 50402:2005+A1:2008 Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen. Requirements on the functional safety of fixed gas detection systems
  • BS EN 50545-1:2011+A1:2016 Electrical apparatus for the detection and measurement of toxic and combustible gases in car parks and tunnels - General performance requirements and test methods for the detection and measurement of carbon monoxide and nitrogen oxides
  • BS EN 61779-2:2000 Electrical apparatus for the detection and measurement of flammable gases - Performance requirements for group I apparatus indicating a volume fraction up to 5% methane in the air
  • BS EN 61779-3:2000 Electrical apparatus for the detection and measurement of flammable gases - Performance requirements for group I apparatus indicating a volume fraction up to 100% methane in air
  • BS EN 50194-1:2009 Electrical apparatus for the detection of combustible gases in domestic premises. Test methods and performance requirements
  • BS EN 50194-2:2006+A1:2016 Electrical apparatus for the detection of combustible gases in domestic premises. Test methods and performance requirements
  • BS EN 50244:2016 Tracked Changes. Electrical apparatus for the detection of combustible gases in domestic premises. Guide on the selection, installation, use and maintenance
  • BS EN 61779-4:2000 Electrical apparatus for the detection and measurement of flammable gases - Performance requirements for group II apparatus indicating a volume fraction up to 100% lower explosive limit
  • BS EN 50057:1991 Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for Group II apparatus indicating up to 100 % lower explosive limit
  • BS EN 50057:1999 Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for Group II apparatus indicating up to 100% lower explosive limit
  • BS EN 45544-3:2015 Tracked Changes. Workplace atmospheres. Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours. Performance requirements for apparatus used for general gas detection
  • BS EN 50056:1999 Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for Group I apparatus indicating up to 100% (V/V) methane in air
  • BS EN 50055:1991 Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for Group I apparatus indicating up to 5 % (V/V) methane in air
  • BS EN 50055:1999 Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for Group I apparatus indicating up to 5 % (V/V) methane in air
  • BS EN 50244:2000 Electrical apparatus for the detection of combustible gases in domestic premises - Guide on the selection, installation, use and maintenance
  • BS EN 50056:1991 Specification for electrical apparatus for the detection and measurement of combustible gases. Performance requirements for Group I apparatus indicating up to 100 % (V/V) methane
  • BS 6020-2:1981 Instruments for the detection of combustible gases - Specification for safety and performance requirements for Group I instruments reading up to 5% methane in air
  • 22/30440600 DC BS EN 50194-1. Electrical apparatus for the detection of flammable gases in household and non-industrial premises - Part 1. Test methods and performance requirements
  • BS EN ISO 18854:2015 Small craft. Reciprocating internal combustion engines exhaust emission measurement. Test-bed measurement of gaseous and particulate exhaust emissions
  • BS 6020-3:1982 Instruments for the detection of combustible gases - Specification for safety and performance requirements for Group I instruments reading up to 100% methane
  • BS ISO 8178-1:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions
  • BS EN 45544-1:2000 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - General requirements and test methods
  • BS ISO 8178-1:2020 Reciprocating internal combustion engines. Exhaust emission measurement - Test-bed measurement systems of gaseous and particulate emissions
  • BS EN 45544-4:2000 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Guide for selection, installation, use and maintenance
  • BS EN 60749-39:2006 Semiconductor devices - Mechanical and climatic test methods - Measurement of moisture diffusivity and water solubility in organic materials used for semiconductor components
  • BS 6020-4:1981 Instruments for the detection of combustible gases - Specification for performance requirements for Group II instruments reading up to 100% lower explosive limit
  • BS 60080:2020 Explosive and toxic atmospheres. Hazard detection mapping. Guidance on the placement of permanently installed flame and gas detection devices using software tools and other techniques
  • BS EN 50545-1:2011 Electrical apparatus for the detection and measurement of toxic and combustible gases in car parks and tunnels. General performance requirements and test methods for the detection and measurement of carbon monoxide and nitrogen oxides
  • BS ISO 8178-2:2021 Tracked Changes. Reciprocating internal combustion engines. Exhaust emission measurement. Measurement of gaseous and particulate exhaust emissions under field conditions
  • 20/30383140 DC BS 60080. Explosive and toxic atmospheres. Hazard detection mapping. Guidance on the placement of permanently installed flame and gas detection devices using software tools and other techniques
  • BS EN 60749-3:2017 Semiconductor devices. Mechanical and climatic test methods - External visual examination
  • BS ISO 10816-4:2009 Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Gas turbine sets with fluid-film bearings
  • BS ISO 8178-2:2009 Reciprocating internal combustion engines. Exhaust emission measurement. Measurement of gaseous and particulate exhaust emissions under field conditions
  • BS ISO 8178-2:2008 Reciprocating internal combustion engines - Exhaust emission measurement - Measurement of gaseous and particulate exhaust emissions under field conditions
  • BS EN 45544-1:2015 Tracked Changes. Workplace atmospheres. Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours. General requirements and test methods
  • BS ISO 7919-4:2009 Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Gas turbine sets with fluid-film bearings
  • BS EN 45544-2:2000 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Performance requirements for apparatus used for measuring concentrations in the region of limit values
  • BS EN 1834-1:2000 Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Group II engines for use in flammable gas and vapour atmospheres
  • BS EN 50194-2:2019 Tracked Changes. Electrical apparatus for the detection of combustible gases in domestic premises. Electrical apparatus for continuous operation in a fixed installation in recreational vehicles and similar premises. Additional test methods and performa...
  • BS EN 15984:2011 Petroleum industry and products. Determination of composition of refinery heating gas and calculation of carbon content and calorific value. Gas chromatography method
  • BS EN 15984:2017 Petroleum industry and products. Determination of composition of refinery heating gas and calculation of carbon content and calorific value. Gas chromatography method
  • BS EN 50194-2:2006 Electrical apparatus for the detection of combustible gases in domestic premises - Electrical apparatus for continuous operation in a fixed installation in recreational vehicles and similar premises - Additional test methods and performance requirements
  • 21/30426008 DC BS ISO 8178-2. Reciprocating internal combustion engines. Exhaust emission measurement. Part 2. Measurement of gaseous and particulate exhaust emissions under field conditions
  • BS ISO 20950-1:2018 Water quality. Determination of available weak and dissociable (WAD) cyanide - Method using ligand exchange, flow injection analysis (FIA), gas-diffusion and amperometric detection
  • BS EN 45544-3:2000 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Performance requirements for apparatus used for measuring concentrations well above limit values

Danish Standards Foundation, Detection of combustible and organic gases

  • DS/EN 50270:2007 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
  • DS/EN 50402/A1:2008 Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen - Requirements on the functional safety of fixed gas detection systems
  • DS/EN 50402:2006 Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen - Requirements on the functional safety of fixed gas detection systems
  • DS/EN 50271:2010 Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies
  • DS/EN 14756:2007 Determination of the limiting oxygen concentration (LOC) for flammable gases and vapours
  • DS/EN 50244:2000 Electrical apparatus for the detection of combustible gases in domestic premises - Guide on the selection, installation, use and maintenance
  • DS/EN 50194-1:2009 Electrical apparatus for the detection of combustible gases in domestic premises - Part 1: Test methods and performance requirements
  • DS/EN 60079-29-2/Corr. 1:2008 Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen
  • DS/EN 60079-29-2:2008 Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen
  • DS/EN 50545-1:2011 Electrical apparatus for the detection and measurement of toxic and combustible gases in car parks and tunnels - Part 1: General performance requirements and test methods for the detection and measurement of carbon monoxide and nitrogen oxides
  • DS/EN 50058:1994 Electrical apparatus for the detection and measurement of combustible gases - Performance requirements for Group II apparatus indication up to 100% (v/v) gas
  • DS/EN 50054:1994 Electrical apparatus for the detection measurement of combustible gases - General requirements and test methods
  • DS/EN 13631-16:2004 Explosives for civil uses - High explosives - Part 16: Detection and measurement of toxic gases
  • DS/EN 50055:1994 Electrical apparatus for the detection and measurement of combustible gases - Performance requirements for Group I apparatus indicating up to 5% (v/v) methane in air
  • DS/EN 50056:1994 Electrical apparatus for the detection and measurement of combustible gases - Performance requirements for Group I apparatus indicating up to 100% (v/v) methane
  • DS/EN 60749-21:2011 Semiconductor devices - Mechanical and climatic test methods - Part 21: Solderability
  • DS/EN 45544-1:2000 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 1: General requirements and test methods

Lithuanian Standards Office , Detection of combustible and organic gases

  • LST EN 50270-2007 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
  • LST EN 50402-2005/A1-2008 Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen - Requirements on the functional safety of fixed gas detection systems
  • LST EN 50402-2005 Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen. Requirements on the functional safety of fixed gas detection systems
  • LST EN 50402-2005/AC-2009 Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen. Requirements on the functional safety of fixed gas detection systems
  • LST EN 50271-2010 Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies
  • LST EN 14756-2007 Determination of the limiting oxygen concentration (LOC) for flammable gases and vapours
  • LST EN 50244-2002 Electrical apparatus for the detection of combustible gases in domestic premises. Guide on the selection, installation, use and maintenance
  • LST EN 50194-1-2009 Electrical apparatus for the detection of combustible gases in domestic premises - Part 1: Test methods and performance requirements
  • LST EN 50545-1-2012 Electrical apparatus for the detection and measurement of toxic and combustible gases in car parks and tunnels -- Part 1: General performance requirements and test methods for the detection and measurement of carbon monoxide and nitrogen oxides
  • LST EN 60079-29-2-2008 Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen (IEC 60079-29-2:2007)
  • LST EN 60079-29-2-2008/AC-2008 Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen (IEC 60079-29-2:2007)
  • LST EN 13631-16-2004 Explosives for civil uses - High explosives - Part 16: Detection and measurement of toxic gases
  • LST EN 45544-1-2001 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 1: General requirements and test methods
  • LST EN 50194-2-2006 Electrical apparatus for the detection of combustible gases in domestic premises -- Part 2: Electrical apparatus for continuous operation in a fixed installation in recreational vehicles and similar premises - Additional test methods and performance requi

European Committee for Electrotechnical Standardization（CENELEC）, Detection of combustible and organic gases

  • FprEN 50270:2021 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
  • EN 50270:2015 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
  • EN 50271:2010 Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies
  • EN 50271:2018 Electrical apparatus for the detection and measurement of combustible gases@ toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies
  • EN 50402:2017 Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen - Requirements on the functional safety of gas detection systems
  • EN 50194-1:2023 Electrical apparatus for the detection of flammable gases in household premises - Part 1: Test methods and performance requirements
  • EN 60079-29-2:2015 Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen
  • EN 50402:2005 Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen - Requirements on the functional safety of fixed gas detection systems (Incorporates Amendment A1: 2008)
  • EN 50244:2016 Electrical apparatus for the detection of combustible gases in domestic premises - Guide on the selection@ installation@ use and maintenance

German Institute for Standardization, Detection of combustible and organic gases

  • DIN EN 50270:2007 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen; German version EN 50270:2006
  • DIN 51853:2011 Testing of fuel gases - Sampling
  • DIN EN 50270:2015 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen; German version EN 50270:2015
  • DIN 51862:1982 Testing of gaseous fuels and other gases; determination of naphthalene content (crude naphthalene)
  • DIN 51872-4:1990 Testing of gaseous fuels and other gases; determination of the components; gaschromatographic procedure
  • DIN EN 50271:2011 Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies; German version EN 50271:2010
  • DIN EN 50545-1:2017 Electrical apparatus for the detection and measurement of toxic and combustible gases in car parks and tunnels - Part 1: General performance requirements and test methods for the detection and measurement of carbon monoxide and nitrogen oxides
  • DIN 51863-2:1983 Testing of gaseous fuels and other gases; determination of hydrogen cyanide content; bromide cyanogen method
  • DIN 51863-1:1983 Testing of gaseous fuels and other gases; determination of hydrogen cyanide content; nickel carbonate method
  • DIN EN 50270 Berichtigung 1:2016 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen; German version EN 50270:2015, Corrigendum to DIN EN 50270 (VDE 0843-30):2015-10; German version EN 50270:2015/AC:2016
  • DIN 51869:2000 Testing of gaseous fuels and other gases - Determination of water content according to Karl Fischer - coulometric method
  • DIN 51859:1990 Testing of gaseous fuels and other gases; gravimetric determination of the content of condensate as a function of pressure and temperature
  • DIN EN 50545-1:2012 Electrical apparatus for the detection and measurement of toxic and combustible gases in car parks and tunnels - Part 1: General performance requirements and test methods for the detection and measurement of carbon monoxide and nitrogen oxides; German ver
  • DIN 51855-7:1986-12 Testing of gaseous fuels and other gases; determination of the content of sulfur compounds; gaschromatographic determination of the content of odoriferous sulfur compounds using an electrochemical detector
  • DIN 51870:1981 Testing of gaseaus fuels and other gases; determination of relative density according to the balance method and calculation of density
  • DIN EN 50402:2009 Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen - Requirements on the functional safety of fixed gas detection systems; German version EN 50402:2005 + A1:2008
  • DIN 51871:1985 Testing of gaseous fuels and other technical gases; determination of dew point of water vapour; method of means of cooled mirror
  • DIN 51855-7:1986 Testing of gaseous fuels and other gases; determination of the content of sulfur compounds; gaschromatographic determination of the content of odoriferous sulfur compounds using an electrochemical detector
  • DIN 51756-3:1987 Testing of liquid and gaseous fuels; determination of knocking characteristics (octane number); determination with the BASF-motor
  • DIN 8541-2:2021-08 Hoses for welding, cutting and allied processes - Part 2: Hoses with coatings for fuel gas, oxygen and other non combustible gases / Note: DIN 8541-2 (1987-12) remains valid alongside this standard until 2022-01-31.
  • DIN 51855-1:2011 Testing of gaseous fuels and other gases - Determination of the content of sulphur compounds - Part 1: Field of application, terms
  • DIN EN 45544-3:2015 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 3: Performance requirements for apparatus used for general gas detection; German version EN 45544-3:2015
  • DIN 51855-4:1995 Testing of gaseous fuels and other gases - Determination of sulphur compounds content - Part 4: Content of hydrogen sulfide, zinc acetate method
  • DIN EN 60749-32:2011-01 Semiconductor devices - Mechanical and climatic test methods - Part 32: Flammability of plastic-encapsulated devices (externally induced) (IEC 60749-32:2002 + Cor. :2003 + A1:2010); German version EN 60749-32:2003 + Cor. :2003 + A1:2010 / Note: DIN EN ...
  • DIN EN 60749-31:2003-12 Semiconductor devices - Mechanical and climatic test methods - Part 31: Flammability of plastic encapsulated devices (internally induced) (IEC 60749-31:2002 + Corr. 1:2003); German version EN 60749-31:2003 / Note: Under certain conditions, DIN EN 60749...
  • DIN EN ISO 18854:2015-08 Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions (ISO 18854:2015); German version EN ISO 18854:2015
  • DIN EN ISO 18854:2015 Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions (ISO 18854:2015)
  • DIN EN 13631-16:2004-11 Explosives for civil uses - High explosives - Part 16: Detection and measurement of toxic gases; German version EN 13631-16:2004
  • DIN 51855-8:1997 Testing of gaseous fuels and other gases - Determination of sulfur compounds content - Part 8: Gaschromatographic determination of dihydrogen sulfide, carbonyl sulfide and other sulfur compounds using specific detectors
  • DIN EN 60749-21:2012-01 Semiconductor devices - Mechanical and climatic test methods - Part 21: Solderability (IEC 60749-21:2011); German version EN 60749-21:2011 / Note: DIN EN 60749-21 (2005-06) remains valid alongside this standard until 2014-05-12.
  • DIN EN 45544-1:2000 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 1: General requirements and test methods; German version EN 45544-1:1999
  • DIN 33831-2:1989 Heat pumps; ready to use heat pump units with internal combustion engine driven compressors, requirements on the gas equipment, testing
  • DIN EN 16617:2015-07 Pipework - Corrugated metal hose assemblies for combustible gas - Performance requirements, testing and marking; German version EN 16617:2015
  • DIN 51666:2007 Testing of petroleum products - Determination of composition for calculation refinery of heating gas carbon content and calorific value by gas chromatography
  • DIN EN 60749-39:2007 Semiconductor devices - Mechanical and climatic test methods - Part 39: Measurement of moisture diffusivity and water solubility in organic materials used for semiconductor components (IEC 60749-39:2006); German version EN 60749-39:2006
  • DIN EN 1827:2009-11 Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking; German version EN 1827:1999+A1:2009
  • DIN EN 45544-4:2000 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 4: Guide for selection, installation, use and maintenance; German version EN 45544-4:1999
  • DIN EN 14624:2020 Performance of portable locating leak detectors and of fixed gas detectors for all refrigerants
  • DIN EN 14624:2020-08 Performance of portable locating leak detectors and of fixed gas detectors for all refrigerants; German version EN 14624:2020
  • DIN ISO 20816-4:2018 Mechanical vibration - Measurement and evaluation of machine vibration - Part 4: Gas turbines in excess of 3 MW, with fluid-film bearings (ISO 20816-4:2018)
  • DIN 51855-6:2000 Testing of gaseous fuels and other technical gases - Determination of sulfur compounds content - Part 6: Content of hydrogen sulfide, mercaptan sulfur and carbonylsulfide sulfur; potentiometric method

RU-GOST R, Detection of combustible and organic gases

  • GOST EN 50270-2012 Electromagnetic compatibility. Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
  • GOST R 52140-2003 Electrical apparatus for the detection and measurement of flammable gases. Part 5. Performance requirements for group II apparatus indicating a volume fraction up to 100 % gas
  • GOST IEC 61779-1-2006 Electrical apparatus for the detection and measurement of flammable gases. Part 1. General requirements and test methods
  • GOST R 53174-2008 Electric generating plants with diesel and gas internal combustion engines. General specifications
  • GOST R 52136-2003 Electrical apparatus for the detection and measurement of flammable gases. Part 1. General requirements and test methods
  • GOST R 8.922-2016 State system for ensuring the traceability of measurements. Gas analyzers and gas alarm devices for determination of combustible gases and vapors in working zone air. Testing method
  • GOST 8.618-2013 State system for ensuring the traceability of measurements. Gas analyzers and gas alarm devices for determination of combustible gases and vapors in working zone air. Verification procedure
  • GOST IEC 61779-5-2006 Electrical apparatus for the detection and measurement of flammable gases. Part 5. Performance requirements for group II apparatus indicating a volume fraction up to 100% gas
  • GOST R 53176-2008 Electric generating plants with gasoline, diesel and gas internal combustion engines. Reliability indexes. Requirements and test methods
  • GOST R 53178-2008 Electric generating plants with gasiline, diesel and gas internal combustion engines. Test methods
  • GOST R 52137-2003 Electrical apparatus for the detection and measurement of flammable gases. Part 2. Performance requirements for group I apparatus indicating a volume fraction up to 5 % methane in air
  • GOST R 52138-2003 Electrical apparatus for the detection and measurement of flammable gases. Part 3. Performance requirements for group I apparatus indicating a volume fraction up to 100 % methane in air
  • GOST R 52139-2003 Electrical apparatus for the detection and measurement of flammable gases. Part 4. Performance requirements for group I1 apparatus indicating a volume fraction up to 100 % lower explosive limit
  • GOST R EN 50194-2008 Electrical apparatus for the detection of combustible gases in domestic premises. General requirements and control methods
  • GOST R IEC 60079-35-1-2011 Caplights for use in mines susceptible to firedamp. Part 1. General requirements and test methods in relation to the risk of explosion
  • GOST 8.629-2013 State system for ensuring the traceability of measurements. Stationary and mobile verification means for combustible gases and vapors gas analyzers and gas alarm devices. General technical requirements
  • GOST IEC 61779-3-2006 Electrical apparatus for the detection and measurement of flammable gases. Part 3. Performance requirements for group I apparatus indicating a volume fraction up to 100% methane in air
  • GOST IEC 61779-2-2006 Electrical apparatus for the detection and measurement of flammable gases. Part 2. Performance requirements for group I apparatus indicating a volume fraction up to 5% methane in air
  • GOST IEC 61779-4-2006 Electrical apparatus for the detection and measurement of flammable gases. Part 4. Performance requirements for group II apparatus indicating a volume fraction up to 100% lower explosive limit
  • GOST R EN 50194-1-2012 Alarm-only apparatus for the detection of combustible gases in domestic premises. Part 1. Test methods and performance requirements
  • GOST R 57975.1-2017 Associated oil gas. Determination of composition by gas chromatography method. Part 1. Determination of hydrocarbons C1-C8+ and inorganic gases content by flame ionization detector and thermal conductivity detector

CENELEC - European Committee for Electrotechnical Standardization, Detection of combustible and organic gases

  • EN 50241-2:1999 Specification for Open Path Apparatus for the Detection of Combustible or Toxic Gases and Vapours - Part 2: Performance Requirements for Apparatus for the Detection of Combustible Gases
  • EN 50270:1999 Electromagnetic Compatibility - Electrical Apparatus for the Detection and Measurement of Combustible Gases@ Toxic Gases or Oxygen
  • EN 50073:1999 Guide for Selection@ Installation@ Use and Maintenance of Apparatus for the Detection and Measurement of Combustible Gases or Oxygen
  • EN 50241-1:1999 Specification for Open Path Apparatus for the Detection of Combustible or Toxic Gases and Vapours@ Part 1: General Requirements and Test Methods
  • EN 61779-1:2000 Electrical Apparatus for the Detection and Measurement of Flammable Gasesm Part 1: General Requirements and Test Methods
  • EN 50194-1:2009 Electrical apparatus for the detection of combustible gases in domestic premises - Part 1: Test methods and performance requirements
  • EN 50271:2001 Electrical Apparatus for the Detection and Measurement of Combustible Gases@ Toxic Gases or Oxygen - Requirements and Tests for Apparatus Using Software and/or Digital Technologies
  • EN 50545-1:2011 Electrical apparatus for the detection and measurement of toxic and combustible gases in car parks and tunnels Part 1: General performance requirements and test methods for the detection and measurement of carbon monoxide and nitrogen oxides
  • EN 61779-5:2000 Electrical Apparatus for the Detection and Measurement of Flammable Gases - Part 5: Performance Requirements for Group II Apparatus Indicating a Volume Fraction Up to 100% Gas
  • EN 60079-29-2:2007 Explosive atmospheres - Part 29-2: Gas detectors - Selection@ installation@ use and maintenance of detectors for flammable gases and oxygen (Incorporating Corrigendum December 2007)
  • EN 50055:1998 Electrical Apparatus for the Detection and Measurement of Combustible Gases Performance Requirements for Group I Apparatus Indicating up to 5 % (v/v) Methane in Air (Ratified European Text)
  • EN 50058:1998 Electrical Apparatus for the Detection and Measurement of Combustible Gases - Performance Requirements for Group II Apparatus Indicating up to 100 % (V/V) Gas
  • EN 50056:1998 Electrical Apparatus for the Detection and Measurement of Combustible Gases - Performance Requirements for Group I Apparatus Indicating up to 100 % (V/V) Methane in Air
  • EN 50057:1998 Electrical Apparatus for the Detection and Measurement of Combustible Gases - Performance Requirements for Group II Apparatus Indicating up to 100 % Lower Explosive Limit
  • EN 61779-3:2000 Electrical Apparatus for the Detection and Measurement of Flammable Gases - Part 3: Performance Requirements for Group I Apparatus Indicating a Volume Fraction Up to 100% Methane in Air
  • EN 61779-4:2000 Electrical Apparatus for the Detection and Measurement of Flammable Gases - Part 4: Performance Requirements for Group II Apparatus Indicating a Volume Fraction Up to 100% Lower Explosive Limit

ES-UNE, Detection of combustible and organic gases

  • UNE-EN 50270:2016/AC:2016-08 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
  • UNE-EN 50270:2016 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
  • UNE-EN 50402:2017 Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen - Requirements on the functional safety of gas detection systems (Endorsed by Asociación Española de Normalización in June of 2017.)
  • UNE-EN 50271:2019 Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies
  • UNE-EN 50244:2018 Electrical apparatus for the detection of combustible gases in domestic premises - Guide on the selection, installation, use and maintenance
  • UNE-EN 60079-29-2:2016 Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen
  • UNE-EN 45544-3:2015 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 3: Performance requirements for apparatus used for general gas detection (Endorsed by AENOR in March of 20...
  • UNE-EN 50545-1:2012/A1:2016 Electrical apparatus for the detection and measurement of toxic and combustible gases in car parks and tunnels - Part 1: General performance requirements and test methods for the detection and measurement of carbon monoxide and nitrogen oxides
  • UNE-EN ISO 18854:2015 Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions (ISO 18854:2015)
  • UNE-EN 16617:2015 Pipework - Corrugated metal hose assemblies for combustible gas - Performance requirements, testing and marking
  • UNE-EN 45544-1:2015 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 1: General requirements and test methods (Endorsed by AENOR in March of 2015.)
  • UNE-EN 60749-21:2011 Semiconductor devices - Mechanical and climatic test methods - Part 21: Solderability (Endorsed by AENOR in November of 2011.)
  • UNE-EN 45544-4:2016 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 4: Guide for selection, installation, use and maintenance (Endorsed by AENOR in June of 2016.)
  • UNE-EN 14624:2021 Performance of portable locating leak detectors and of fixed gas detectors for all refrigerants
  • UNE-EN 45544-2:2015 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 2: Performance requirements for apparatus used for exposure measurement (Endorsed by AENOR in March of 2015.)

未注明发布机构, Detection of combustible and organic gases

  • BS EN 50270:2015(2016) Electromagnetic compatibility — Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
  • BS EN 720-2:1997 Transportable gas cylinders - Gases and gas mixtures Part 2. Determination of flammability and oxidizing ability of gases and gas mixtures
  • BS EN 50241-1:1999(2004) Specification for open path apparatus for the detection of combustible or toxic gases and vapours — Part 1 : General requirements and test methods
  • BS EN 61779-1:2000(2004) Electrical apparatus for the detection and measurement of flammable gases — Part 1 : General requirements and test methods
  • DIN EN ISO 8178-1:1996 Reciprocating internal combustion engines, Exhaust emission measurement — Part 1: Test-bed measurement of gaseous and particulate exhaust emissions

Professional Standard - Petrochemical Industry, Detection of combustible and organic gases

  • SH 3063-1999 Specification for the design of combustble gas and toxic gas detection and alarm for petrochemical industry

Korean Agency for Technology and Standards (KATS), Detection of combustible and organic gases

  • KS C 6566-2002(2022) Gas sensors for detecting flammable gas
  • KS C 6566-2002(2017) Gas sensors for detecting flammable gas
  • KS E 4116-2006(2011) Hot wire type gas alarms
  • KS C IEC 61779-6:2003 Electrical apparatus for the detection and measurement of flammable gases－Part 6：Guide for the selection, installation, use and maintenance of apparatus for the detection and measurement of flammable gases
  • KS C 6591-2007 Installation, operation and maintenance of combustible gas detection instruments
  • KS E 4115-2006(2011) Interferometer type gas alarms
  • KS E 4115-1980 Interferometer type gas alarms
  • KS C IEC 61779-6-2003(2018)
  • KS C 6591-2007(2018) Installation, operation and maintenance of combustible gas detection instruments
  • KS C 6598-2007(2018) Electrical apparatus for the detection of combustible gases in domestic premises－Test methods and performance requirements
  • KS C 6599-2007(2018) Installation, operation and maintenance of combustible gases detection instruments in domestic premises
  • KS C IEC 61779-1-2003(2018)
  • KS C IEC 61779-5-2003(2018)
  • KS C IEC 61779-1:2003 Electrical apparatus for the detection and measurement of flammable gases－Part 1：General requirements and test methods
  • KS C IEC 60079-29-2:2012 Explosive atmospheres－Part 29-2：Gas detectors－Selection, installation, use and maintenance of detectors for flammable gases and oxygen
  • KS C IEC 60079-29-2-2012(2022) Explosive atmospheres－Part 29-2：Gas detectors－Selection, installation, use and maintenance of detectors for flammable gases and oxygen
  • KS C IEC 61779-2-2003(2018)
  • KS C IEC 61779-3-2003(2018)
  • KS E 3733-2014 Determination or carbon monoxide and temperature in combustion gases of holed briquette
  • KS C 6599-2007 Installation, operation and maintenance of combustible gases detection instruments in domestic premises
  • KS R ISO 8178-1:2007 Reciprocating internal combustion engines－Exhaust emission measurement－Part 1 : Test-bed measurement of gaseous and particulate exhaust emissions
  • KS C IEC 61779-5:2003 Electrical apparatus for the detection and measurement of flammable gases－Part 5：Performance requirements for groupⅡ apparatus indicating a volume fraction up to 100% gas
  • KS C 6593-2007(2018) Installation, operation and maintenance of toxic gas-Detection instruments：Hydrogen sulfide
  • KS C IEC 61779-4-2003(2018)
  • KS R ISO 8178-1:2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
  • KS B ISO 11513-2012(2022) Gas cylinders－Refillable welded steel cylinders containing materials for sub-atmospheric gas packaging(excluding acetylene)－Design, construction, testing, use and periodic inspection
  • KS R ISO 8178-2:2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
  • KS C IEC 61779-3:2003 Electrical apparatus for the detection and measurement of flammable gases- Part 3:Performance requirements for groupⅠapparatus indicating a volume fraction up to 100% methane in air
  • KS B ISO 11513:2022 Gas cylinders — Refillable welded steel cylinders containing materials for sub-atmospheric gas packaging(excluding acetylene) — Design, construction, testing, use and periodic inspection
  • KS C IEC 60749-21:2020 Semiconductor devices — Mechanical and climatic test methods — Part 21: Solderability
  • KS C IEC 61779-4:2003 Electrical apparatus for the detection and measurement of flammable gases－ Part 4：Performance requirements for groupⅡapparatus indicating a volume fraction up to 100% lower explosive limit
  • KS C IEC 61779-2:2003 Electrical apparatus for the detection and measurement of flammable gases－Part 2 : Performance requirements for group Iapparatus indicating a volume fraction up to 5% methane in air
  • KS B ISO 23551-4:2019 Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 4: Valve-proving systems for automatic shut-off valves
  • KS C IEC 60749-39:2006 Semiconductor devices－Mechanical and climatic test methods－Part 39：Measurement of moisture diffusivity and water solubility in organic materials used for semiconductor components
  • KS R ISO 6460:2006 Road vehicles-Measurement method of gaseous pollutants emitted by motorcycles equipped with a controlled ignition engine
  • KS R ISO 6460-2006(2011) Road vehicles－Measurement method of gaseous pollutants emitted by motorcycles equipped with a controlled ignition engine

国家能源局, Detection of combustible and organic gases

  • SY/T 6503-2022 Safety Specifications for Combustible Gas and Toxic Gas Detection and Alarm Systems in Petroleum and Natural Gas Engineering
  • SY/T 6503-2016 Safety Specifications for Combustible Gas Detection and Alarm Systems in Petroleum and Natural Gas Engineering

National Metrological Verification Regulations of the People's Republic of China, Detection of combustible and organic gases

  • JJG 693-2004 the Alarmer Detectors of Combustible Gas
  • JJG 693-2011 Verification Regulation of Alarmer Detectors of Combustible Gas

CZ-CSN, Detection of combustible and organic gases

AENOR, Detection of combustible and organic gases

  • UNE-EN 50402:2006 Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen - Requirements on the functional safety of fixed gas detection systems
  • UNE-EN 50402:2006/A1:2008 Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen - Requirements on the functional safety of fixed gas detection systems
  • UNE-EN 50271:2011 Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies
  • UNE-EN 14756:2007 Determination of the limiting oxygen concentration (LOC) for flammable gases and vapours
  • UNE-EN 50244:2001 Electrical apparatus for the detection of combustible gases in domestic premises - Guide on the selection, installation, use and maintenance.
  • UNE-EN 50194-1:2011 Electrical apparatus for the detection of combustible gases in domestic premises -- Part 1: Test methods and performance requirements
  • UNE-EN 60079-29-2:2011 Explosive atmospheres -- Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen
  • UNE-EN 50545-1:2012 Electrical apparatus for the detection and measurement of toxic and combustible gases in car parks and tunnels - Part 1: General performance requirements and test methods for the detection and measurement of carbon monoxide and nitrogen oxides
  • UNE-EN 13631-16:2005 Explosives for civil uses - High explosives - Part 16: Detection and measurement of toxic gases
  • UNE-EN 50194-2:2007 Electrical apparatus for the detection of combustible gases in domestic premises -- Part 2: Electrical apparatus for continuous operation in a fixed installation in recreational vehicles and similar premises - Additional test methods and performance requi
  • UNE-EN 16509:2015 Transportable gas cylinders - Non-refillable, small transportable, steel cylinders of capacities up to and including 120 ml containing compressed or liquefied gases (compact cylinders) - Design, construction, filling and testing

Jiangxi Provincial Standard of the People's Republic of China, Detection of combustible and organic gases

  • DB36/T 759-2019 Technical specifications for safety inspection of combustible gas and toxic gas alarm system in industrial enterprises
  • DB36/ 759-2013 Technical specifications for safety inspection of combustible gas and toxic gas alarm system in industrial enterprises

Japanese Industrial Standards Committee (JISC), Detection of combustible and organic gases

  • JIS M 7653:1996 Portable type combustible gas detector
  • JIS B 8008-1:2023 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 1: Test-bed measurement systems of gaseous and particulate emissions

ISA - International Society of Automation, Detection of combustible and organic gases

KR-KS, Detection of combustible and organic gases

European Committee for Standardization (CEN), Detection of combustible and organic gases

  • EN 50270:2006 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
  • EN 50054:1998 Electrical Apparatus for the Detection and Measurement of Combustible Gases - General Requirements and Test Methods
  • EN 50054:1991 Electrical apparatus for the detection and measurement of combustible gases; general requirements and test methods
  • EN 720-2:1996 Transportable Gas Cylinders - Gases and Gas Mixtures - Part 2: Determination of Flammability and Oxidizing Ability of Gases and Gas Mixtures
  • EN 50055:1991 Electrical apparatus for the detection and measurement of combustible gases; performance requirements for group I apparatus indicating up to 5 % (v/v) methane in air
  • EN 50244:2000 Electrical Apparatus for the Detection of Combustible Gases in Domestic Premises - Guide on the Selection, Installation, Use and Maintenance
  • EN 1839:2017 Determination of the explosion limits and the limiting oxygen concentration(LOC) for flammable gases and vapours
  • EN 50056:1991 Electrical apparatus for the detection and measurement of combustible gases; performance requirements for group I apparatus indicating up to 100 % (v/v) methane
  • EN 50058:1991 Electrical apparatus for the detection and measurement of combustible gases; performance requirements for group II apparatus indicating up to 100 % (v/v) gas
  • EN 1834-1:2000 Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 1: Group II engines for use in flammable gas and vapour atmospheres
  • EN ISO 18854:2015 Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions (ISO 18854:2015)
  • EN 50057:1991 Electrical apparatus for the detection and measurement of combustible gases; performance requirements for group II apparatus indicating up to 100 % lower explosive limit
  • EN 417:2012 Non-refillable metallic gas cartridges for liquefied petroleum gases, with or without a valve, for use with portable appliances - Construction, inspection, testing and marking
  • EN 12619:1999 Stationary Source Emissions - Determination of the Mass Concentration of Total Gaseous Organic Carbon at Low Concentrations in Flue Gases - Continuous Flame Ionization Detector Method
  • EN 45544-1:1999 Workplace Atmospheres - Electrical Apparatus Used for the Direct Detection and Direct Concentration Measurement of Toxic Gases and Vapours - Part 1: General Requirements and Test Methods
  • EN 45544-1:2015 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 1: General requirements and test methods
  • EN 15984:2011 Petroleum industry and products - Determination of composition of refinery heating gas and calculation of carbon content and calorific value - Gas chromatography method
  • EN 15984:2017 Petroleum industry and products - Determination of composition of refinery heating gas and calculation of carbon content and calorific value - Gas chromatography method

Standard Association of Australia （SAA）, Detection of combustible and organic gases

  • AS/NZS 61779.6:2000 Electrical apparatus for the detection and measurement of flammable gases Part 6: Guide for the selection,installation,use and maintenance of apparatus for the detection and measurement of flammable gases
  • AS/NZS 60079.20:2000 Electrical apparatus for explosive gas atmospheres - Data for flammable gases and vapours, relating to the use of electrical apparatus
  • AS 2896:2011
  • AS 2896:2021 Medical gas systems — Installation and testing of non-flammable medical gas pipeline systems
  • AS/NZS 61779.1:2000 Electrical apparatus for the detection and measurement of flammable gases Part 1: General requirements and test methods
  • AS/NZS 60079.29.2:2016 Explosive atmospheres, Part 29.2: Gas detectors — Selection, installation, use and maintenance of detectors for flammable gases and oxygen
  • AS 4955.3:2003 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Autogenous ignition test in oxygen atmospheres
  • AS/NZS 4641(Int):2005 Electrical apparatus for detection of oxygen and other gases and vapours at toxic levels--General requirements and test methods
  • AS/NZS 4641:2018 Electrical equipment for detection of oxygen and other gases and vapours at toxic levels — General requirements and test methods
  • AS/NZS 61779.1/AMD 1:2005 Amendment No.1 to AS/NZS 61779.1:2000 Electrical apparatus for the detection and measurement of flammable gases Part 1: General requirements and test methods
  • AS 4215.1:1995 Methods of test for determining fire extinguishing and inerting concentrations for flammable liquids and gases - Determination of fire extinguishing concentrations
  • AS 4215.2:1995 Methods of test for determining fire extinguishing and inerting concentrations for flammable liquids and gases - Determination of fire inerting concentrations
  • AS 4215.0:1995 Methods of test for determining fire extinguishing and inerting concentrations for flammable liquids and gases - General introduction and list of methods

International Electrotechnical Commission (IEC), Detection of combustible and organic gases

  • IEC 61779-6:1999 Electrical apparatus for the detection and measurement of flammable gases - Part 6: Guide for the selection, installation, use and maintenance of apparatus for the detection and measurement of flammable gases
  • IEC 61779-1:1998 Electrical apparatus for the detection and measurement of flammable gases - Part 1: General requirements and test methods
  • IEC 61779-5:1998 Electrical apparatus for the detection and measurement of flammable gases - Part 5: Performance requirements for group II apparatus indicating a volume fraction up to 100 % gas
  • IEC TR3 60079-20:1996 Electrical apparatus for explosive gas atmospheres - Part 20: Data for flammable gases and vapours, relating to the use of electrical apparatus
  • IEC 61779-2:1998 Electrical apparatus for the detection and measurement of flammable gases - Part 2: Performance requirements for group I apparatus indicating a volume fraction up to 5 % methane in air
  • IEC 61779-3:1998 Electrical apparatus for the detection and measurement of flammable gases - Part 3: Performance requirements for group I apparatus indicating a volume fraction up to 100 % methane in air
  • IEC 61779-4:1998 Electrical apparatus for the detection and measurement of flammable gases - Part 4: Performance requirements for group II apparatus indicating a volume fraction up to 100 % lower explosive limit

Professional Standard - Petroleum, Detection of combustible and organic gases

  • SY 6503-2000 Regulation for using combustible gas detection and alarm instruments
  • SY 6503-2016 Safety specification of combustible gas detection and alarm system for petroleum and natural gas engineering
  • SY 6503-2008 Safety technical specification of combustible gas detection and alarm system for petroleum and natural gas engineering

National Aeronautics and Space Administration (NASA), Detection of combustible and organic gases

NZ-SNZ, Detection of combustible and organic gases

  • AS/NZS 60079.29.2:2008 Explosive atmospheres Part 29.2: Gas detectors-Selection, installation, use and maintenance of detectors for flammable gases and oxygen
  • AS/NZS 4641:2007 Electrical apparatus for detection of oxygen and other gases and vapours at toxic levels-General requirements and test methods (Incorporating Amendment 1: June 2008)

Instrument Society of America (ISA), Detection of combustible and organic gases

  • ISA TR84.00.07-2010 Guidance on the Evaluation of Fire, Combustible Gas and Toxic Gas System Effectiveness
  • ISA 60079-29-2-2012 Explosive Atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen (12.13.02)
  • ISA RP12.13.02-2003 Recommended Practice for the Installation, Operation, and Maintenance of Combustible Gas Detection Instruments

SE-SIS, Detection of combustible and organic gases

  • SIS SS-EN 50 054-1992 Electrical apparatus for the detection and measurement of combustible gases — General requirements and test methods
  • SIS SS-EN 50 058-1992 Electrical apparatus for the detection and measurement of combustible gases - Performance requirements for Group II apparatus indicating up to 100 % (v/v) gas
  • SIS SS-EN 50 055-1992 Electrical apparatusfor the detection and measurement ofcombustible gases - Performance requirements for Group I apparatus indicating upto5% (v/v) methane in air
  • SIS SS-EN 50 057-1992 Electrical apparatusfor the detection and measurement of combustible gases - Performance requirements for Group II apparatus indicating up to 100 % lower explosive limit
  • SIS SS-EN 50 056-1992 Electrical apparatus for the detection and measurement of combustible gases — Performance requireménts for Group I apparatus indicating up to 100 % (v/v) methane

National Metrological Technical Specifications of the People's Republic of China, Detection of combustible and organic gases

  • JJF 1368-2012 Program of Pattern Evaluation of Combustible.Gas Alarm Detectors

Group Standards of the People's Republic of China, Detection of combustible and organic gases

  • T/YSG 001-2022 Specifications for Field Calibration of Combustible Gas Detection and Alarms
  • T/CAS ES380926001-2022 Rules for quality grading and evaluating of industrial products—Online analyzers – Online combustible and toxic gas detector
  • T/CIC 401-2021 High temperature non-dispersive infrared absorption method for detection of inorganic harmful gas factors in waste gas from fixed pollution sources in metallurgical industry
  • T/CEEIA 543-2021 Guide to the detection and diagnosis of gases dissolved in synthetic organic ester transformer oil in service

BE-NBN, Detection of combustible and organic gases

  • NBN-EN 50058-1993 Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for Group II apparatus indicating up to 100 % (v/v) gas
  • NBN-EN 50054-1993 Electrical apparatus for the detection and measurement of combustible gases. General requirements and test methods
  • NBN-EN 298-1994 Automatic gas burner control systems for gas burners and gas burning appliances with or without fans
  • NBN-EN 50057-1993 Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for Group II apparatus indicating up to 100 % lower explosive limit
  • NBN-EN 50055-1993 Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for Group I apparatus indicating up to 5 % (v/v) methane in air
  • NBN-EN 50056-1993 Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for Group I apparatus indicating up to 100 % (v/v) methane in air

Taiwan Provincial Standard of the People's Republic of China, Detection of combustible and organic gases

  • CNS 3376-20-2002 Electrical apparatus for explosive gas atmospheres - Part 20: Data for flammable gases and vapours, relating to the use of electrical apparatus
  • CNS 3376.20-2002 Electrical apparatus for explosive gas atmospheres - Part 20: Data for flammable gases and vapours, relating to the use of electrical apparatus

ZA-SANS, Detection of combustible and organic gases

  • SANS 61779-6:1999 Electrical apparatus for the detection and measurement of flammable gases Part 6: Guide for the selection, installation, use and maintenance of apparatus for the detection and measurement of flammable gases
  • SANS 60079-20:1996 Electrical apparatus for explosive gas atmospheres Part 20: Data for flammable gases and vapours relating to the use of electrical apparatus
  • SANS 1825:2005 Gas container test stations - General requirements for periodic inspection and testing of portable and transportable refillable gas containers
  • SANS 1515-2:2006 Gas measuring equipment primarily for use in mines Part 2: Fixed, transportable, and vehicle-mounted flammable gas measuring and warning sensor heads and instruments
  • SANS 1515-1:2006 Gas measuring equipment primarily for use in mines Part 1: Battery-operated portable, flammable gas measuring instruments and warning devices
  • ARP 068-2007 Inspection and non-destructive testing of previously-installed OEM airbag inflator modules in motor vehicles

ES-AENOR, Detection of combustible and organic gases

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Detection of combustible and organic gases

  • GB/T 20936.2-2017 Gas detectors for explosive atmospheres—Part 2：Selection，installation，use and maintenance of detectors for flammable gases and oxygen

American National Standards Institute （ANSI), Detection of combustible and organic gases

  • ANSI/ISEA 102-1990(R2015) American National Standard For Gas Detector Tube Units - Short Term Type for Toxic Gases and Vapors in Working Environments
  • ANSI/ISO 14065:2007 Greenhouse gases - Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition

Professional Standard - Energy, Detection of combustible and organic gases

  • NB/SH/T 0919-2015 Standard test method for determination of sulfur compounds in gaseous fuels and natural gas by gas chromatography and chemiluminescence

Underwriters Laboratories (UL), Detection of combustible and organic gases

  • UL 60079-29-2 BULLETIN-2023 UL Standard for Safety Explosive Atmospheres – Part 29-2: Gas Detectors - Selection, Installation, Use and Maintenance of Detectors for Flammable Gases and Oxygen

American Society for Testing and Materials (ASTM), Detection of combustible and organic gases

  • ASTM D7493-08 Standard Test Method for Online Measurement of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatograph and Electrochemical Detection
  • ASTM D3827-92(2020) Standard Test Method for Estimation of Solubility of Gases in Petroleum and Other Organic Liquids
  • ASTM D7493-22 Standard Test Method for Online Measurement of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatograph and Electrochemical Detection

SG-SPRING SG, Detection of combustible and organic gases

  • CP 85-2000 CODE OF PRACTICE FOR Cylinders in bundles for permanent and liquefiable gases (excluding acetylene) -Inspection at time of filling

International Organization for Standardization (ISO), Detection of combustible and organic gases

  • ISO 18854:2015 Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions
  • ISO 20816-4:2018 Mechanical vibration - Measurement and evaluation of machine vibration - Part 4: Gas turbines in excess of 3 MW, with fluid-film bearings
  • ISO 8178-2:2021 Reciprocating internal combustion engines — Exhaust emission measurement — Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
  • ISO 8178-2:2008 Reciprocating internal combustion engines - Exhaust emission measurement - Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
  • ISO 20950-1:2018 Water quality - Determination of available weak and dissociable (WAD) cyanide - Part 1: Method using ligand exchange, flow injection analysis (FIA), gas-diffusion and amperometric detection
  • ISO 8178-1:2020 Reciprocating internal combustion engines — Exhaust emission measurement — Part 1: Test-bed measurement systems of gaseous and particulate emissions

Association of German Mechanical Engineers, Detection of combustible and organic gases

  • VDI 3481 Blatt 4-2007 Gaseous emission measurement - Measurement of the concentrations of total organic carbon and methane carbon using the flame ionisation detector (FID)
  • VDI 3865 Blatt 3-1998 Measurement of organic soil pollutants - Gas-chromatographic determination of volatile organic compounds in soil gas adsorption at activated carbon and desorption with organic solvents
  • VDI 2100 Blatt 4-2015 Gaseous ambient air measurement - Indoor air pollution measurement - Gas chromatographic determination of organic compounds - Methods of preparing calibration gases and calibration solutions
  • VDI 3481 Blatt 3-1995 Gaseous emission measurement - Determination of volatile organic compounds, especially solvents, flame ionization detector (FID)

GOSTR, Detection of combustible and organic gases

  • GOST R 8.968-2019 State system for ensuring the uniformity of measurements. Alarm only apparatus for determination of combustible gases and vapors. Verification procedure

US-CFR-file, Detection of combustible and organic gases

  • CFR 46-38.25-1-2014 Shipping. Part38:Liquefied flammable gases. Section38.25-1:Tests and inspections—TB/ALL.

AT-ON, Detection of combustible and organic gases

  • ONORM M 7345-1985 Technical specifications for delivery of valves; alves for gas pipelines, gas supply installations nd combustible liquids; dditional tests for type testing

RO-ASRO, Detection of combustible and organic gases

  • STAS 11773-1980 Plants and installations for heat treatment COMBUSTIBLE GAS HEATED FIXED HEARTH CHAMBER FURNACES Main parameters

  Electromagnetic compatibility - Electrical equipment for the detection and measurement of flammable gases, toxic gases or oxygen, Electromagnetic Compatibility - Electrical Instruments for the Detection and Measurement of Combustible Gases, Toxic Gases or Oxygen, Electrical instruments for the detection and measurement of flammable gases, toxic gases or oxygen, Electrical instruments for detection and measurement of combustible gases and toxic gases, Detection of combustible and organic gases, Detection of combustible gas and organic gas, Design of detection alarm for combustible gas and toxic gas in petrochemical industry, Design of flammable gas and toxic gas detection and alarm in petrochemical enterprises.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved