ZH
RU
ES

Composite interface

Composite interface, Total:499 items.

In the international standard classification, Composite interface involves: Ceramics, Wastes, Non-destructive testing, Reinforced plastics, Semi-manufactures of timber, Rubber and plastics products, Protection of and in buildings, Plastics, Wood-based panels, Mechanical testing, Construction materials, Products of the textile industry, Materials for aerospace construction, Vocabularies, Raw materials for rubber and plastics, Ground service and maintenance equipment, Fluid storage devices, Equipment for entertainment, Road engineering, Test conditions and procedures in general, Adhesives, Materials and articles in contact with foodstuffs, Testing of metals, Cycles, Pipeline components and pipelines, Materials for the reinforcement of composites, Aircraft and space vehicles in general, Soil quality. Pedology, Sports equipment and facilities, Products of the chemical industry, Footwear, Information sciences. Publishing, Dentistry, Seals, glands, Equipment for the rubber and plastics industries, Road vehicles in general, Non-ferrous metals, Vibrations, shock and vibration measurements, Protection against fire, Furniture, Electrical wires and cables, Thermodynamics and temperature measurements, Installations in buildings, Nuclear energy engineering, Cases. Boxes. Crates, Products of non-ferrous metals, Insulating materials, Analytical chemistry, Spices and condiments. Food additives, Paper and board, Company organization and management, Electrical accessories, Semiconductor devices, Services, Materials and components for railway engineering, Optical equipment, Paints and varnishes.

British Standards Institution (BSI), Composite interface

BS DD CEN/TS 15881:2009 Advanced technical ceramics - Ceramic composites - Determination of the fibre/matrix interfacial frictional shear stress at room temperature by tensile tests on mini-composites
DD CEN/TS 15881:2009 Advanced technical ceramics. Ceramic composites. Determination of the fibre/matrix interfacial frictional shear stress at room temperature by tensile tests on mini-composites
BS EN 16245-4:2013 Fibre-reinforced plastic composites. Declaration of raw material characteristics. Specific requirements for fabrics
BS EN ISO 14126:1999 Fibre-reinforced plastic composites. Determination of compressive properties in the in-plane direction
23/30442752 DC BS ISO 8060. Composites and reinforcements fibres. Carbon fibre reinforced plastics (CFRPs) and metal assemblies. Characterization of durability of adhesive interfaces by wedge rupture test
BS ISO 23930:2023 Fibre-reinforced plastic composites. Full-section compressive test for pultruded profiles
PD ISO/TR 13086-5:2022 Gas cylinders. Information for design of composite cylinders. Impact testing of composite cylinders
BS EN 15534-6:2015 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)). Specifications for fencing profiles and elements
BS EN 15534-6:2015+A1:2017 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)). Specifications for fencing profiles and elements
BS EN 15534-1:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)). Test methods for characterisation of compounds and products
BS EN 15534-1:2014+A1:2017 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)). Specifications for cladding profiles and tiles
BS EN 15534-4:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)). Specifications for decking profiles and tiles
BS EN 15534-5:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)). Specifications for cladding profiles and tiles
BS EN 13121-2:2003 GRP tanks and vessels for use above ground - Composite materials - Chemical resistance
BS ISO 16616:2015 Test methods for natural fibre-reinforced plastic composite (NFC) deck boards
DD CEN/TS 15880:2009 Advanced technical ceramics. Ceramic composites. Determination of the fibre/matrix interfacial frictional shear stress at room temperature by a single fibre pushout method
22/30420635 DC BS ISO 23930. Fibre-reinforced plastic composites. Full section compression test for pultruded profiles
BS ISO 19095-5:2023 Plastics. Evaluation of the adhesion interface performance in plastic-metal assemblies - Fracture energy
22/30420646 DC BS ISO 4410. Experimental characterization of in-plane permeability of fibrous reinforcements for liquid composite moulding
DD CEN/TS 15534-2:2007 Wood-plastics composites (WPC) — Part 2: Characterisation of WPC materials
BS ISO 4410:2023 Test methods for the experimental characterization of in-plane permeability of fibrous reinforcements for liquid composite moulding
22/30409908 DC BS EN ISO 14126. Fibre-reinforced plastic composites. Determination of compressive properties in the in-plane direction
BS DD CEN/TS 15880:2009 Advanced technical ceramics - Ceramic composites - Determination of the fibre/matrix interfacial frictional shear stress at room temperature by a single fibre pushout method
19/30384123 DC BS EN 15534-5. Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5. Specifications for cladding profiles and tiles
BS PD ISO/TR 22293:2021 Evaluation of methods for assessing the release of nanomaterials from commercial, nanomaterial-containing polymer composites
BS ISO 15034:1999 Composites - Prepregs - Determination of resin flow
BS ISO 15034:2000 Composites. Prepregs. Determination of resin flow
BS EN 16245-5:2013 Fibre-reinforced plastic composites. Declaration of raw material characteristics. Specific requirements for core materials
PD ISO/TR 22293:2021 Evaluation of methods for assessing the release of nanomaterials from commercial, nanomaterial-containing polymer composites
BS EN 16245-1:2013 Fibre-reinforced plastic composites. Declaration of raw material characteristics. General requirements
BS ISO 19095-6:2021 Plastics. Evaluation of the adhesion interface performance in plastic-metal assemblies. Accelerated degradation test
BS EN ISO 14125:1998 Fibre-reinforced plastic composites - Determination of flexural properties
BS EN ISO 14125:1998+A1:2011 Fibre-reinforced plastic composites. Determination of flexural properties
BS EN 16245-3:2013 Fibre-reinforced plastic composites. Declaration of raw material characteristics. Specific requirements for fibre
PD CEN ISO/TS 23818-2:2022 Assessment of conformity of plastics piping systems for the rehabilitation of existing pipelines. Resin-fibre composite (RFC) material
BS ISO 13124:2011 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for interfacial bond strength of ceramic materials
PD ISO/TR 4673:2022 Gas cylinders. Service life performance of composite cylinders and tubes
BS EN 13677-1:2003 Reinforced thermoplastic moulding compounds - Specification for GMT - Designation
BS ISO 20819-1:2020 Tracked Changes. Plastics. Wood-plastic recycled composites (WPRC). Specification
BS EN 60455-3-4:2003 Resin based reactive compounds used for electrical insulation - Specifications for individual materials - Filled polyurethane compounds - Sheet 4: Filled polyurethane compounds
BS ISO 20263:2017 Microbeam analysis. Analytical electron microscopy. Method for the determination of interface position in the cross-sectional image of the layered materials
BS EN 60455-3-3:2003 Resin based reactive compounds used for electrical insulation - Specifications for individual materials - Unfilled polyurethane compounds - Sheet 3: Unfilled polyurethane compouds
DD ENV 12289-1996 Advanced technical ceramics. Mechanical properties of ceramic composites at ambient temperature. Determination of in-plane shear properties
BS EN 13677-3:2003 Reinforced thermoplastic moulding compounds - Specification for GMT - Specific requirements

European Committee for Standardization (CEN), Composite interface

PD CEN/TS 15881:2009 Advanced technical ceramics - Ceramic composites - Determination of the fibre/matrix interfacial frictional shear stress at room temperature by tensile tests on mini-composites
CEN/TS 15881:2009 Advanced technical ceramics - Ceramic composites - Determination of the fibre/matrix interfacial frictional shear stress at room temperature by tensile tests on mini-composites
EN 15534-6:2015 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 6: Specifications for fencing profiles and elements
PD CEN/TS 17158:2018 Composites made from cellulose based materials and thermoplastics (usually called wood polymer composites (WPC) or natural fibre composites (NFC)) - Determination of particle size of lignocellosic material
EN 15534-1:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1: Test methods for characterisation of compounds and products
PD CEN/TR 17112:2017 Cycles - Composite material used in bicycles - Specific tests suitable for components manufactured from composite materials
CEN/TR 17112:2017 Cycles - Composite material used in bicycles - Specific tests suitable for components manufactured from composite materials
prEN ISO 14126 Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction (ISO/DIS 14126:2022)
PD CEN/TS 15880:2009 Advanced technical ceramics - Ceramic composites - Determination of the fibre/matrix interfacial frictional shear stress at room temperature by a single fibre push-out method
CEN/TS 15880:2009 Advanced technical ceramics - Ceramic composites - Determination of the fibre/matrix interfacial frictional shear stress at room temperature by a single fibre push-out method
EN 13121-2:2003 GRP tanks and vessels for use above ground - Part 2: Composite materials; Chemical resistance
EN 16245-5:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 5: Specific requirements for core materials
EN ISO 3990:2023 Dentistry - Evaluation of antibacterial activity of dental restorative materials, luting materials, fissure sealants and orthodontic bonding or luting materials (ISO 3990:2023)

Danish Standards Foundation, Composite interface

DS/CEN/TS 15881:2009 Advanced technical ceramics - Ceramic composites - Determination of the fibre/matrix interfacial frictional shear stress at room temperature by tensile tests on mini-composites
DS/EN 14233:2003 Materials and articles in contact with foodstuffs - Plastics - Temperature at the plastics/food interface - Determination of temperature of plastics and materials and articles at the plastics/food interface during microwave and conventional oven heating i
DS/EN ISO 14126:2000 Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction (ISO 14126:1999)
DS/CEN/TS 15534-2:2007 Wood-plastics composites (WPC) - Part 2: Characterisation of WPC materials
DS/CEN/TS 15880:2009 Advanced technical ceramics - Ceramic composites - Determination of the fibre/matrix interfacial frictional shear stress at room temperature by a single fibre push-out method
DS/EN ISO 15310:2005 Fibre-reinforced plastic composites - Determination of the in-plane shear modulus by the plate twist method
DS/ISO/TR 22293:2021 Evaluation of methods for assessing the release of nanomaterials from commercial, nanomaterial-containing polymer composites
DS/EN ISO 4049:2009 Dentistry - Polymer-based restorative materials
DS/EN ISO 14126/AC:2002 Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction (ISO 14126:1999/Cor.1:2001)
DS/EN 13421:2006 Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites
DS/EN ISO 14125/A1:2011 Fibre-reinforced plastic composites - Determination of flexural properties
DS/EN ISO 14125/Corr.1:2002 Fibre-reinforced plastic composites - Determination of flexural properties
DS/EN ISO 14125:1999 Fibre-reinforced plastic composites - Determination of flexural properties
DS/EN 60626-3:2008 Combined flexible materials for electrical insulation - Part 3: Specifications for individual materials
DS/EN 60626-3/A1:2012 Combined flexible materials for electrical insulation - Part 3: Specifications for individual materials
DS/EN 1007-3:2003 Advanced technical ceramics - Ceramic composites - Methods of test for reinforcement - Part 3: Determination of filament diameter and cross-section area
DS/EN 16245-5:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 5: Specific requirements for core materials
DS/CEN/TS 15534-1:2007 Wood-plastics composites (WPC) - Part 1: Test methods for characterisation of WPC materials and products

Association Francaise de Normalisation, Composite interface

XP B43-401*XP CEN/TS 15881:2010 Advanced technical ceramics - Ceramic composites - Determination of the fibre/matrix interfacial frictional shear stress at room temperature by tensile tests on mini-composites
XP CEN/TS 15881:2010 Céramiques techniques avancées - Céramiques composites - Détermination de la contrainte de frottement en cisaillement à l'interface fibre/matrice à température ambiante - Essais de traction sur minicomposites
NF EN IEC 61788-26:2020 Supraconductivité - Partie 26 : mesurage du courant critique - Courant critique continu des composites supraconducteurs de RE-Ba-Cu-O
NF EN 61788-10:2006 Supraconductivité - Partie 10 : mesure de la température critique - Température critique des composites supraconducteurs par une méthode par résistance
NF EN ISO 14126:2000 Composites plastiques renforcés de fibres - Détermination des caractéristiques en compression dans le plan
NF T57-120-4*NF EN 16245-4:2013 Fibre-reinforced plastic composites -Declaration of raw material characteristics - Part 4 : specific requirements for fabrics
NF T57-103*NF EN ISO 14126:2000 Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction
NF EN 15534-5:2014 Composites à base de matières cellulosiques et de thermoplastiques (communément appelés composites bois-polymères (WPC) ou composites fibres d'origine naturelle (NFC)) - Partie 5 : spécifications relatives aux lames et plaques pour bardage et la...
NF EN 15534-6/IN1:2018 Composites à base de matières cellulosiques et de thermoplastiques (communément appelés composites bois-polymères (WPC) ou composites fibres d'origine naturelle (NFC)) - Partie 6 : Spécifications relatives aux profiles et éléments pour clôtures
NF EN 15534-6+A1:2018 Composites à base de matières cellulosiques et de thermoplastiques (communément appelés composites bois-polymères (WPC) ou composites fibres d'origine naturelle (NFC)) - Partie 6 : Spécifications relatives aux profilés et éléments pour clôtures
NF EN 15534-1/IN1:2018 Composites à base de matières cellulosiques et de thermoplastiques (communément appelés composites bois-polymères (WPC) ou composites fibres d'origine naturelle (NFC)) - Partie 1 : Méthodes d'essai pour la caractérisation des compositions et d...
NF EN 15534-1+A1:2018 Composites à base de matières cellulosiques et de thermoplastiques (communément appelés composites bois-polymères (WPC) ou composites fibres d'origine naturelle (NFC)) - Partie 1 : Méthodes d'essai pour la caractérisation des compositions et d...
NF T58-300-6*NF EN 15534-6+A1:2018 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) Part 6 : Specifications for fencing profiles and elements
NF T58-300-6/IN1*NF EN 15534-6/IN1:2018 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 6 : specifications for fencing profiles and elements
NF S54-205:2008 Impact attenuating playground surfacing - Determination of critical fall height.
NF EN 15534-4:2014 Composites à base de matières cellulosiques et de thermoplastiques (communément appelés composites bois-polymères (WPC) ou composites fibres d'origine naturelle (NFC)) - Partie 4 : spécifications relatives aux lames et dalles pour platelage
NF T58-300-1/IN1*NF EN 15534-1/IN1:2018 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1 : Test methods for characterisation of compounds and products
NF T58-300-1*NF EN 15534-1+A1:2018 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1 : Test methods for characterisation of compounds and products
NF ISO 17095:2013 Céramiques techniques - Méthode d'essai pour la résistance de l'interface des matériaux céramiques à des températures élevées
XP T58-300-2*XP CEN/TS 15534-2:2007 Wood-plastics composites (WPC) - Part 2 : characterisation of WPC materials
XP CEN/TS 15534-2:2007 Composites bois-plastiques (WPC) - Partie 2 : caractérisation des matièriaux en WPC
NF T58-300-5*NF EN 15534-5:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5 : specifications for cladding profiles and tiles
NF T58-300-4*NF EN 15534-4:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 4 : specifications for decking profiles and tiles
NF EN 12970:2000 Composites - Préimprégnés - Détermination du temps de gélification
NF ISO 15040:2001 Composites - Préimprégnés - Détermination du temps de gélification
NF T58-300-1:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1 : test methods for characterisation of compounds and products
XP B43-400*XP CEN/TS 15880:2010 Advanced technical ceramics - Ceramic composites - Determination of the fibre/matrix interfacial frictional shear stress at room temperature by the single fibre push-out method
NF EN ISO 15310:2005 Composites plastiques renforcés de fibres - Détermination du module de cisaillement dans le plan par la méthode de torsion de plaque
NF ISO 15024:2002 Composites plastiques renforcés de fibres - Détermination de la ténacité à la rupture interlaminaire en mode I, Gic, de matériaux composites à matrice polymère renforcés de fibres unidirectionnelles
NF G62-010:1982 FOOTWEAR. DETERMINATION OF THE RESISTANCE TO REPEATED FLEXING OF FOREGOING MATERIALS.
NF ISO 15034:2001 Composites - Préimprégnés - Détermination de l'écoulement de résine
NF T57-403*NF EN ISO 15310:2005 Fibre-reinforced plastic composites - Determination of the in-plane shear modulus by the plate twist method
NF E68-001:2014 Equipment for the manufacture of products made of composite materials - Terminology
NF EN 13421:2006 Plastiques - Compositions de moulage thermodurs - Composites et fibres de renfort - Préparation des éprouvettes pour déterminer l'anisotropie des propriétés des composites de moulage par compression
NF EN ISO 14125:1998 Composites plastiques renforcés de fibres - Détermination des propriétés de flexion
NF T57-120-5*NF EN 16245-5:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 5: specific requirements for core materials
NF T57-105*NF EN ISO 14125:1998 Fibre-reinforced plastic composites. Determination of flexural properties.
NF B43-106:1990 Ceramic matrix composites for thermostructural applications - Composites with continuous reinforcement 1D,2D,3D - Determination of tensile properties at high temperature
NF EN 16245-5:2013 Composites plastiques renforcés de fibres - Déclaration des caractéristiques des matières premières - Partie 5 : exigences particulières pour les matériaux d'âme
NF L19-003:1992 Aéronautique et espace - Matériaux alvéolaires à cellules tubulaires - (M.A.C.T.) en matériaux composites et non métalliques - Généralités.
NF F11-296:1991 Railway rolling stock. Disk brake linings made of composite materials.
NF T57-120-1*NF EN 16245-1:2013 Fibre-reinforced plastic composites -Declaration of raw material characteristics - Part 1: general requirements
NF B43-306*NF EN 12289:2005 Advanced technical ceramics - Mechanical properties of ceramic composites at ambiant temperature - Determination of in-plane shear properties

German Institute for Standardization, Composite interface

DIN CEN/TS 15881:2009-08*DIN SPEC 1017:2009-08 Advanced technical ceramics - Ceramic composites - Determination of the fibre/matrix interfacial frictional shear stress at room temperature by tensile tests on mini-composites; German version CEN/TS 15881:2009
DIN SPEC 1017:2009 Advanced technical ceramics - Ceramic composites - Determination of the fibre/matrix interfacial frictional shear stress at room temperature by tensile tests on mini-composites; German version CEN/TS 15881:2009
DIN CEN/TS 15534-3:2007 Wood-plastics composites (WPC) - Part 3: Characterisation of WPC products; German version CEN/TS 15534-3:2007
DIN EN ISO 14126:2022-10 Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction (ISO/DIS 14126:2022); German and English version prEN ISO 14126:2022 / Note: Date of issue 2022-09-16*Intended as replacement for DIN EN ISO 14126 (...
DIN EN 15534-5:2019 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5: Specifications for cladding profiles and tiles; German and English version prEN 15534-5:2019
DIN CEN/TS 17158:2018-06*DIN SPEC 68158:2018-06 Composites made from cellulose based materials and thermoplastics (usually called wood polymer composites (WPC) or natural fibre composites (NFC)) - Determination of particle size of lignocellosic material; German version CEN/TS 17158:2018
DIN EN 15534-6:2018-01 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 6: Specifications for fencing profiles and elements; German version EN 15534-6:2015+A1:2017
DIN EN 15534-5:2019-02 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5: Specifications for cladding profiles and tiles; German and English version prEN 15534-5:2019 / ...
DIN EN 15534-4:2014-04 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 4: Specifications for decking profiles and tiles; German version EN 15534-4:2014
DIN EN ISO 14126:2000-12 Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction (ISO 14126:1999); German version EN ISO 14126:1999 / Note: To be replaced by DIN EN ISO 14126 (2022-10).
DIN SPEC 1016:2009 Advanced technical ceramics - Ceramic composites - Determination of the fibre/matrix interfacial frictional shear stress at room temperature by a single fibre push-out method; German version CEN/TS 15880:2009
DIN CEN/TS 15534-1:2007 Wood-plastics composites (WPC) - Part 1: Test methods for characterisation of WPC materials and products; German version CEN/TS 15534-1:2007
DIN CEN/TS 15534-2:2007-08 Wood-plastics composites (WPC) - Part 2: Characterisation of WPC materials; German version CEN/TS 15534-2:2007
DIN CEN/TS 15880:2009-08*DIN SPEC 1016:2009-08 Advanced technical ceramics - Ceramic composites - Determination of the fibre/matrix interfacial frictional shear stress at room temperature by a single fibre push-out method; German version CEN/TS 15880:2009
DIN EN 15534-5:2014-04 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5: Specifications for cladding profiles and tiles; German version EN 15534-5:2014 / Note: To be re...
DIN EN 15534-1:2018-02 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1: Test methods for characterisation of compounds and products; German version EN 15534-1:2014+A1:...
DIN EN 15534-6:2018 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 6: Specifications for fencing profiles and elements (includes Amendment A1:2017)
DIN EN 15534-1:2018 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1: Test methods for characterisation of compounds and products (includes Amendment A1:2017)
DIN EN ISO 15310:2005-10 Fibre-reinforced plastic composites - Determination of the in-plane shear modulus by the plate twist method (ISO 15310:1999); German version EN ISO 15310:2005
DIN EN 15534-5:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5: Specifications for cladding profiles and tiles; German version EN 15534-5:2014
DIN EN 15534-4:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 4: Specifications for decking profiles and tiles; German version EN 15534-4:2014
DIN EN ISO 9693:2000 Dental ceramic fused to metal restorative materials (ISO 9693:1999); German version EN ISO 9693:2000
DIN 66084:2021 Classification of burning behaviour of upholstered compounds
DIN 66084:2003 Classification of burning behaviour of upholstered compounds
DIN EN 15534-1:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1: Test methods for characterisation of compounds and products; German version EN 15534-1:2014
DIN EN 13421:2006-05 Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites; German version EN 13421:2005
DIN EN ISO 14125:2011-05 Fibre-reinforced plastic composites - Determination of flexural properties (ISO 14125:1998 + Cor.1:2001 + Amd.1:2011); German version EN ISO 14125:1998 + AC:2002 + A1:2011
DIN 65187:1986 Aerospace; inserts for composite materials, with clearance hole, aluminium alloy
DIN EN 16245-5:2013-08 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 5: Specific requirements for core materials; German version EN 16245-5:2013

Korean Agency for Technology and Standards (KATS), Composite interface

KS I 3170-2014 Building facade recycled composite
KS I 3170-2016 Building facade recycled composite
KS M ISO 14126-2012(2022) Fibre-reinforced plastic composites－Determination of compressive properties in the in-plane direction
KS M ISO 14126-2012(2017) Fibre-reinforced plastic composites－Determination of compressive properties in the in-plane direction
KS M ISO 15310-2002(2017) Fibre－reinforced plastic composites－Determination of the in－plane shear modulus by the plate twist method
KS M 3526-2007 Reclaimed plastic for manufacture composite of bowl
KS M ISO 15310-2002(2022) Fibre－reinforced plastic composites－Determination of the in－plane shear modulus by the plate twist method
KS B ISO 10112:2001 Damping materials-Graphical presentation of the complex modulus
KS B ISO 10112_2001:2001 Damping materials-Graphical presentation of the complex modulus
KS B ISO 10112_2001:2016 Damping materials－Graphical presentation of the complex modulus
KS M ISO 14125:2012 Fibre-reinforced plastic composites－Determination of flexural properties
KS M ISO 14125-2012(2017) Fibre-reinforced plastic composites－Determination of flexural properties
KS M ISO 14125-2012(2022) Fibre-reinforced plastic composites－Determination of flexural properties
KS K 0741-2015 Standard test method for determining the bond strength(ply adhesion) of geocomposites
KS K 0741-2011 Test method for adhesion and bonding strength of geocomposites
KS M ISO 5435:2012 Rubber compounding ingredients－Carbon black－Determination of tinting strength

American Society for Testing and Materials (ASTM), Composite interface

ASTM D5377-93(1998) Standard Classification for Rubber Compounding Materials-Ground Coal
ASTM D7499/D7499M-09(2023) Standard Test Method for Measuring Geosynthetic-Soil Resilient Interface Shear Stiffness
ASTM D3878-00 Standard Terminology Composite Materials
ASTM D3878-01 Standard Terminology Composite Materials
ASTM D3878-03 Standard Terminology for Composite Materials
ASTM D3878-03a Standard Terminology for Composite Materials
ASTM D3878-04a Standard Terminology for Composite Materials
ASTM D3878-04 Standard Terminology for Composite Materials
ASTM D3878-07 Standard Terminology for Composite Materials
ASTM D3878-07(2013) Standard Terminology for Composite Materials
ASTM D3878-15 Standard Terminology for Composite Materials
ASTM D3878-23 Standard Terminology for Composite Materials
ASTM D5461-93(1998) Standard Test Method for Rubber Additives-Wet Sieve Analysis of Powdered Rubber Chemicals
ASTM D5461-06(2021) Standard Test Method for Rubber Compounding Materials—Wet Sieve Analysis of Powdered Rubber Compounding Materials
ASTM D5461-06(2017) Standard Test Method for Rubber Compounding Materials&x2014;Wet Sieve Analysis of Powdered Rubber Compounding Materials
ASTM D6088-06(2011) Standard Practice for Installation of Geocomposite Pavement Drains
ASTM D4762-88(2001) Standard Guide for Testing Automotive/Industrial Composite Materials
ASTM D4762-88(1995)e1 Standard Guide for Testing Automotive/Industrial Composite Materials
ASTM D7745-19 Standard Practice for Testing Pultruded Composites
ASTM D4528-88(2021) Standard Classification for Rubber Compounding Materials—Sulfur
ASTM D4762-16 Standard Guide for Testing Polymer Matrix Composite Materials
ASTM D5448/D5448M-93 Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders
ASTM D5448/D5448M-93(2000) Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders
ASTM D1331-20 Standard Test Methods for Surface and Interfacial Tension of Solutions of Paints, Solvents, Solutions of Surface-Active Agents, and Related Materials
ASTM D4762-04 Standard Guide for Testing Polymer Matrix Composite Materials
ASTM D4762-11 Standard Guide for Testing Polymer Matrix Composite Materials
ASTM D4762-11a Standard Guide for Testing Polymer Matrix Composite Materials
ASTM D4762-08 Standard Guide for Testing Polymer Matrix Composite Materials
ASTM D4762-18 Standard Guide for Testing Polymer Matrix Composite Materials
ASTM D4762-23 Standard Guide for Testing Polymer Matrix Composite Materials
ASTM F868-91(1997)e1 Standard Classification for Laminated Composite Gasket Materials
ASTM F868-02 Standard Classification for Laminated Composite Gasket Materials
ASTM F868-02(2009) Standard Classification for Laminated Composite Gasket Materials
ASTM F868-17 Standard Classification for Laminated Composite Gasket Materials
ASTM D5377-93(2021) Standard Classification for Rubber Compounding Materials—Ground Coal
ASTM D1331-14 Standard Test Methods for Surface and Interfacial Tension of Solutions of Paints, Solvents, Solutions of Surface-Active Agents, and Related Materials
ASTM D5448/D5448M-22 Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders
ASTM B976-11(2015) Standard Specification for Fiber Reinforced Aluminum Matrix Composite (AMC) Core Wire for Aluminum Conductors, Composite Reinforced (ACCR)
ASTM D4817-88(1999) Standard Classification for Rubber Compounding Materials-Stearic Acid
ASTM D4295-89(1999) Standard Classification for Rubber Compounding Materials-Zinc Oxide
ASTM D4817-88(2021) Standard Classification for Rubber Compounding Materials—Stearic Acid
ASTM D4295-89(2021) Standard Classification for Rubber Compounding Materials—Zinc Oxide
ASTM D4528-88(2017) Standard Classification for Rubber Compounding Materials—Sulfur
ASTM D5377-93(2017) Standard Classification for Rubber Compounding Materials—Ground Coal
ASTM D8364/D8364M-21 Standard Specification for Geosynthetic Cementitious Composite Mat (GCCM) Materials
ASTM D3518/D3518M-18 Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a ±45° Laminate
ASTM D5448/D5448M-93(2006) Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders
ASTM D4255/D4255M-20 Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method
ASTM D3171-99(2004) Standard Test Methods for Constituent Content of Composite Materials
ASTM F1276-99 Standard Test Method for Creep Relaxation of Laminated Composite Gasket Materials
ASTM F1276-99(2003) Standard Test Method for Creep Relaxation of Laminated Composite Gasket Materials
ASTM D7745-11 Standard Practice for Testing Pultruded Composites
ASTM D2291/D2291M-22 Standard Practice for Fabrication of Ring Test Specimens for Glass-Resin Composites
ASTM D7931-18 Standard Guide for Specifying Drainage Geocomposites
ASTM D4817-88(2017) Standard Classification for Rubber Compounding Materials—Stearic Acid
ASTM D4676-94(2021) Standard Classification for Rubber Compounding Materials—Antidegradants
ASTM D4677-87(2022) Standard Classification for Rubber Compounding Materials—Titanium Dioxide
ASTM D4295-89(2017) Standard Classification for Rubber Compounding Materials—Zinc Oxide
ASTM D3171-22 Standard Test Methods for Constituent Content of Composite Materials
ASTM D2291/D2291M-16 Standard Practice for Fabrication of Ring Test Specimens for Glass-Resin Composites
ASTM D3171-15 Standard Test Methods for Constituent Content of Composite Materials
ASTM D8484-23 Standard Specification for Plastic Lumber Materials and Wood-Plastic Composite Materials Used as Exterior Wall Coverings
ASTM D4255/D4255M-01 Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method
ASTM D4255/D4255M-83(1994)e1 Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method
ASTM D4255/D4255M-20e1 Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method
ASTM D4255/D4255M-15 Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method
ASTM D4255/D4255M-15a Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method
ASTM F806-99a Standard Test Method for Compressibility and Recovery of Laminated Composite Gasket Materials
ASTM D589-97(2007) Standard Test Method for Opacity of Paper (15&176; Diffuse Illuminant A, 89 % Reflectance Backing and Paper Backing)
ASTM D5899-98 Standard Classification System for Rubber Compounding Materials for Use in Computer Material Management Systems
ASTM D5899-98(2019) Standard Classification System for Rubber Compounding Materials for Use in Computer Material Management Systems
ASTM D5899-98(2013) Standard Classification System for Rubber Compounding Materials for Use in Computer Material Management Systems
ASTM D3530/D3530M-97(2003) Standard Test Method for Volatiles Content of Composite Material Prepreg
ASTM D3530/D3530M-97 Standard Test Method for Volatiles Content of Composite Material Prepreg
ASTM D3530-20 Standard Test Method for Volatiles Content of Composite Material Prepreg
ASTM B976-21 Standard Specification for Fiber Reinforced Aluminum Matrix Composite (AMC) Core Wire for Aluminum Conductors Aluminum Matrix Composite Reinforced (ACAMCR) (formerly known as ACCR)
ASTM D7264/D7264M-06 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
ASTM D3039/D3039M-07 Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials
ASTM D3039/D3039M-00(2006) Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials
ASTM D3039/D3039M-00 Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials
ASTM D7264/D7264M-21 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
ASTM D3039/D3039M-17 Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials
ASTM D7264/D7264M-15 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
ASTM D8335-20 Standard Guide for Identification of Fiber-Reinforced Polymer-Matrix Composite Materials
ASTM D3039/D3039M-14 Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials
ASTM D303-85 Standard test method for tensile properties of polymer matrix composites
ASTM D4676-94 Standard Classification for Rubber Compounding Materials—Antidegradents
ASTM D4676-94(2001) Standard Classification for Rubber Compounding Materials—Antidegradents
ASTM D4818-21 Standard Classification for Rubber Compounding Materials—Vulcanization Accelerators
ASTM D4676-94(2017) Standard Classification for Rubber Compounding Materials—Antidegradants
ASTM D4315-21 Standard Test Methods for Rubber Compounding Material—Zinc Oxide
ASTM D4677-87(2018) Standard Classification for Rubber Compounding Materials—Titanium Dioxide
ASTM D3479/D3479M-12 Standard Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials
ASTM D7001-06 Standard Specification for Geocomposites for Pavement Edge Drains and Other High-Flow Applications
ASTM D3530M-97(2008)e1 Standard Test Method for Volatiles Content of Composite Material Prepreg
ASTM D3530-97(2008)e2 Standard Test Method for Volatiles Content of Composite Material Prepreg
ASTM D3530/D3530M-97(2008) Standard Test Method for Volatiles Content of Composite Material Prepreg

Group Standards of the People's Republic of China, Composite interface

T/CSTM 00433-2023 Nondestructive testing- Bonding interface of mullite fiber composites- Terahertz time-Domain spectroscopy detection method
T/HEBQIA 082-2022 Modular composite cornice for gas station canopy
T/DASI 018-2021 Building wall flexible inorganic sheet composite decoration system materials
T/CRRA 2001-2021 Composite solid powders prepared from paint slag
T/CECS 10001-2017 Anti-crack and anti-permeability composite materials used for concrete
T/CECS 10001-2019 Anti-crack and anti-permeability composites used in concrete

Professional Standard - Aviation, Composite interface

HB 7237-1995 In-plane shear test method for composite laminates
HB 7736.2-2004 Test method for physical properties of composite material prepreg Part 2:Determination of mass per unit area
HB 7736.3-2004 Test method for physical properties of composite material prepreg Part 3:Determination of fiber mass per unit area

GOSTR, Composite interface

GOST R 57970-2017 Carbon composites. Carbon composites reinforced with carbon fiber. Classification
GOST R 57831-2017 Polymer composites. The methods of determining the size and aspect ratio of carbon composites fragments destined for recycling
GOST R 56661-2019 Polymer composites. Method for determination of ？sandwich？ core materials Poisson's Ratio
GOST R 57953-2017 Ceramics composites. Test Method for bond strength of ceramic materials
GOST 34367.2-2017 Polymer composites. Acquisition and presentation of comparable numerical property data for long-fibre-reinforced composites
GOST R 57778-2017 Polymer composites. Determination of in-plane shear properties by the rail shear method
GOST R 57859-2017 Polymer composites. Test method for determining resistance of synthetic polymeric materials to fungi
GOST R 56680-2015 Polymer composites. Determination facing’s mechanical flexural properties of sandwich construction by long beam flexure method
GOST R 57864-2017 Polymer composites. Test method for determination of through-thickness flatwise tensile strength and elastic modulus
GOST R 56678-2019 Polymer composites. Method for determination of sandwich core materials dimensional stability
GOST R 57696-2017 Polymer composites. Method for determination of diffuse light transmission factor of building panels
GOST R 57785-2017 Polymer composites. Prepregs and premixes. Determination of compression moulding shrinkage
GOST R 57753-2017 Polymer composites. Test method for determination of apparent interlaminar shear strength of pultruded glass composite rods

RU-GOST R, Composite interface

GOST 32649-2014 Polymer composites. Determination of mass per unit area of prepregs
GOST R 56793-2015 Polymer composites. Method for determination of fatigue delamination of unidirectional reinforced composites
GOST R 56814-2015 Polymer composites. Ultrasonic testing of sandwich constructions face sheet and core material
GOST 33846-2016 Polymer composites. Methods for determination of resins, fibers and voids in carbon composite
GOST R 56660-2015 Polymer composites. Method for determination of depth of dye penetration in a composite rod
GOST R 56806-2015 Polymer composites. Identification of polymer composites in electronic databases
GOST R 57845-2017 Polymer composites. Calculation of normative values for structural materials
GOST R 57745-2017 Polymer composites. Determination of plane shear strength of laminates by short-beam method
GOST 33843-2016 Polymer composites. Method for determination of shear modulus in the plane by torsion
GOST R 56808-2015 Polymer composites. Method for determination interlaminar fracture toughness of unidirectional-reinforced composites
GOST R 56655-2015 Polymer composites. Method for determination of in-plane shear strength of pultruded glass-reinforced plastic rods
GOST R 56786-2015 Polymer composites. Method for determination of shear strength in the plane of the reinforcement
GOST R 56656-2015 Metal composites. Method for determination of tensile properties of fiber reinforced metal matrix composites
GOST R 56679-2015 Polymer composites. Method for determination of voids
GOST R 57866-2017 Polymer composites. Determination of flexural properties
GOST 32653-2014 Polymer composites. Determination of gel time of prepregs
GOST 33847-2016 Polymer composites. Determination of the moisture content of the reinforcing fillers
GOST R 57930-2017 Polymer composites. Determination of surface profile at exposure in climatic conditions through 3D microscopy
GOST R 56809-2015 Polymer composites. Method for determination of compressive strength parallel to the plane of sandwich constructions
PNST 101-2016 Table tennis. Tabletops from composite materials. Technical requirements and test methods
GOST R 56654-2015 Polymer composites. Method for determination of density of sandwich core materials
GOST R 59555-2021 Layout profile products from wood-polymeric composite. Specifications
GOST R 56740-2015 Polymer composites. Method for determination of translaminar fracture toughness characteristic of polymer composite laminates and pultruded polymer composites
GOST R 57733-2017 Polymer composites. Test method for determination of inplane shear properties of hoop wound samples
GOST R 57946-2017 Polymer composites. Calculating of materials thermal endurance from thermogravimetric decomposition data
GOST R 57049-2016 Polymer composites. Test method for shear fatigue of sandwich core materials
GOST 32660-2014 Polymer composites. Prepregs. Determination of resin flow
GOST R 57755-2017 Polymer composites. Prepregs. Determination of the degree of fibre wetting
GOST R 56805-2015 Polymer composites. Methods for determination of flexural properties
GOST R 56761-2015 Polymer composites. Method for determination of Barcol hardness
GOST R 57712-2017 Polymer composites. Test method for determination of specific heat
GOST R 56763-2015 Polymer composites. Method for determination of tensile strength of sandwich core materials
GOST R 56651-2015 Polymer composites. Method for determination of shear properties of sandwich core materials
GOST R 56816-2015 Polymer composites. Determination of flatwise compressive properties of sandwich cores
GOST R 56796-2015 Polymer composites. Prepregs. Method for determination of constituent content of prepreg
GOST R 56975-2016 Polymer composites. Appearance of glass-reinforced plastic laminate products
GOST R 56795-2015 Polymer composites. Shearography of polymer composite materials, sandwich core materials and filament-wound pressure vessels
GOST 34033-2016 Package of paperboard and composite materials for food-stuffs. Specifications
GOST R 56800-2015 Polymer composites. Determination of tensile properties of unreinforced and reinforced materials
GOST 33495-2015 Polymer composites. Test method for compression after impact
GOST R 57734-2017 Polymer composites. Determination of impact energy to break sample
GOST R 57715-2017 Polymer composites. Determination of impact energy to break sample
GOST R 56789-2015 Polymer composites. Prepreg. Method for determination of volatiles content in prepreg
GOST R 56807-2015 Polymer composites. Recording of mechanical test data of polymer composites in electronic databases. General requirements
GOST R 57865-2017 Polymer composites. Normalization of physical-mechanical properties depending on of reinforcing filler
GOST R 56652-2015 Polymer composites. Methods for determination of water absorption of core materials for sandwich constructions
GOST R 57843-2017 Wood polymer composites. Test methods for determination of flexural mechanical properties
GOST R 57041-2016 Polymer composites. Method of determination of the characteristics of flexural curved beams
GOST R 57746-2017 Polymer composites. Determination of cleavage strength of adhesive bonded joints
GOST R 56741-2015 Composites. Method of measuring the uniformity of absorbing electrochromic coating on a glazing surface
GOST 32654-2014 Polymer composites. Thermosetting prepregs and premixes. Determination of cure characteristics
GOST 32664-2014 Polymer composites. Prepregs and premixes. Determination of apparent volatile-matter content
GOST R 56684-2015 Polymer composites. Method for determination of sandwich constructions` damage resistances
GOST R EN 40-7-2013 Fibre reinforced polymer composite of lighting columns. Technical specifications
GOST R 56782-2015 Polymer composites. Prepregs. Determenation of constituent content of prepreg by Soxhlet extraction
GOST R 56760-2015 Polymer composites. Identification of fibers, fillers and core materials in computerized materials property databases
GOST R 57728-2017 Polymer composites. Determination of shear strength of adhesive bond by the block-shear method
GOST R 56764-2015 Polymer composites. Method for measurement of thickness of sandwich construction cores

International Organization for Standardization (ISO), Composite interface

ISO 23930:2023 Fibre-reinforced plastic composites — Full-section compressive test for pultruded profiles
ISO/DIS 8060:2023 Composites and reinforcements fibres — Carbon fibre reinforced plastics (CFRPs) and metal assemblies — Characterization of durability of adhesive interfaces by wedge rupture test
ISO 14126:1999 Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction
ISO/FDIS 14126:2023 Fibre-reinforced plastic composites — Determination of compressive properties in the in-plane direction
ISO 14126:2023 Fibre-reinforced plastic composites — Determination of compressive properties in the in-plane direction
ISO 16616:2015 Test methods for natural fibre-reinforced plastic composite (NFC) deck boards
ISO 15040:1999 Composites - Prepregs - Determination of gel time
ISO 15034:1999 Composites - Prepregs - Determination of resin flow
ISO/PRF 4410:2023 Test methods for the experimental characterization of in-plane permeability of fibrous reinforcements for liquid composite moulding
ISO 4410:2023 Test methods for the experimental characterization of in-plane permeability of fibrous reinforcements for liquid composite moulding
ISO 14126:1999/cor 1:2001 Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction; Technical corrigendum 1
ISO/TR 22293:2021 Evaluation of methods for assessing the release of nanomaterials from commercial, nanomaterial-containing polymer composites
ISO 3990:2023 Dentistry — Evaluation of antibacterial activity of dental restorative materials, luting materials, fissure sealants and orthodontic bonding or luting materials
ISO 19095-5:2023 Plastics — Evaluation of the adhesion interface performance in plastic-metal assemblies — Part 5: Fracture energy
ISO 5435:2008 Rubber compounding ingredients - Carbon black - Determination of tinting strength
ISO 5435:2017 Rubber compounding ingredients - Carbon black - Determination of tinting strength
ISO 14125:1998/Amd 1:2011 Fibre-reinforced plastic composites - Determination of flexural properties; Amendment 1
ISO/CD 20263:2023 Microbeam analysis — Analytical electron microscopy — Method for the determination of interface position in the cross-sectional image of the layered materials
ISO 19095-6:2021 Plastics - Evaluation of the adhesion interface performance in plastic-metal assemblies - Part 6: Accelerated degradation test
ISO 20144:2019 Fibre-reinforced plastic composites — Standard qualification plan (SQP) for composite materials, including reduced qualification plan (RQP) and extended qualification plan (EQP) schemes
ISO/CD TR 22785-6:2023 Coatings on plastics and composites — Part 6: Stone chip resistance

Professional Standard - Building Materials, Composite interface

JC/T 2028-2018 Composite facing material for mineral wool thermal insulation products
JC/T 2028-2010 Composite facing materials wool's thermal insulation

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Composite interface

GB/T 28889-2012 Test method for in-plane shear properties of composite materials
GB/T 43116-2023 Fiber-reinforced plastic composites include composites standard certification schemes for reduced and extended certifications
GB 15146.5-1994 Nuclear criticality safety for fissile materials outside reactors-Nuclear criticality control criteria and subcritical limits for plutonium-natural uranium mixtures
GB/T 43087-2023 Method for determining the interface position in cross-sectional images of layered materials using microbeam analysis and electron microscopy

SAE - SAE International, Composite interface

SAE AS7118A-2008 Nadcap Requirements for Composites
SAE PT-200-2019 Damage and Repair of Aerospace Composite Materials
SAE ARP6287-2018 Environmental Degradation of Composite Materials
SAE ARP5143A-2018 Vacuum Bagging of Thermosetting Composite Repairs
SAE PT-202-2019 Material and Process Modeling of Aerospace Composites
SAE R-401-2011 ENGINEERED TRIBOLOGICAL COMPOSITES The Art of Friction Material Development
SAE PT-165-2015 Biocomposites in Automotive Applications
SAE T-122-2009 Engineering Plastics and Plastic Composites In Automotive Applications
SAE J2253-2017 Test Procedures for Automotive Structural Composite Materials
SAE AIR5552-2010 Development and Qualification of Composite Landing Gears
SAE AE-27-1997 Design of Durable@ Repairable@ and Maintainable Aircraft Composites
SAE AMS3915A-2015 Advanced Composites Prepreg - Nominal 250 degree F Cure - Glass Fiber and Epoxy Resin, 7781 Weave Fabric
SAE R-336-2005 Care and Repair of Advanced Composites (Second Edition)
SAE PT-172-2015 The Use of Nano Composities in Automotive Applications
SAE AMS3892C-2016 Fibers@ Carbon@ Tow and Yarn For Structural Composites

Society of Automotive Engineers (SAE), Composite interface

SAE ARP4118A-2013 Isolation and Corrosion Protection of Dissimilar Materials, Carbon Composite Structure Repair
SAE ARP4977-1996 Drying of Thermosetting Composite Materials
SAE ARP4977-2021 DRYING OF THERMOSETTING COMPOSITE MATERIALS
SAE ARP4991-1998 Core Restoration of Thermosetting Composite Components
SAE ARP5143-2011 Vacuum Bagging of Thermosetting Composite Repairs
SAE ARP4991A-2014 Core Restoration of Thermosetting Composite Components
SAE J2253-1995 Test Procedures for Automotive Structural Composite Materials
SAE AIR5552-2020 Development and Qualification of Composite Landing Gears
SAE ARP4118B-2019 Isolation and Corrosion Protection of Dissimilar Materials, Carbon Composite Structure Repair
SAE ARP5143-2002 Vacuum Bagging of Thermosetting Composite Repairs
SAE AMS3915-2013 Advanced Composites Prepreg - Nominal 250 degree F Cure - Glass Fiber and Epoxy Resin, 7781 Weave Fabric
SAE ARP6262-2014 Basic Composite Repair Technician Certification Standard

Japanese Industrial Standards Committee (JISC), Composite interface

JIS K 7018:1999 Fiber-reinforced plastic composites -- Determination of compressive properties in the in-plane direction
JIS K 7021:2007 Fibre-reinforced plastic composites -- Determination of the in-plane shear modulus by the plate twist method
JIS H 7006:1991 Glossary of terms used in metal matrix composites
JIS K 7017:1999 Fibre-reinforced plastics composites -- Determination of flexural properties

未注明发布机构, Composite interface

BS EN ISO 14126:1999(2003) Fibre - reinforcedplastic composites — Determination of compressive properties in the in - plane direction
BS EN ISO 3990:2023 Dentistry — Evaluation of antibacterial activity of dental restorative materials, luting materials, fissure sealants and orthodontic bonding or luting materials

ES-UNE, Composite interface

UNE-EN ISO 14126/AC:2002 Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction. (ISO 14126:1999/Cor. 1:2001).
UNE-EN 15534-6:2016+A1:2018 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 6: Specifications for fencing profiles and elements
UNE-EN 15534-1:2014+A1:2018 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1: Test methods for characterisation of compounds and products
UNE-CEN/TS 17158:2018 Composites made from cellulose based materials and thermoplastics (usually called wood polymer composites (WPC) or natural fibre composites (NFC)) - Determination of particle size of lignocellosic material (Endorsed by Asociación Española de Normaliz...
UNE-CEN ISO/TS 23818-2:2022 Assessment of conformity of plastics piping systems for the rehabilitation of existing pipelines - Part 2: Resin-fibre composite (RFC) material (ISO/TS 23818-2:2021) (Endorsed by Asociación Española de Normalización in October of 2022.)
UNE-EN ISO 14125/AC:2002 Fibre-reinforced plastic composites - Determination of flexural properties. (ISO 14125:1998/Cor. 1:2001)

ESDU - Engineering Sciences Data Unit, Composite interface

ESDU 91003-1991 Delamination of tapered composites.
ESDU 83014 A-1986 Failure criteria for an individual layer of a fibre reinforced composite laminate under in-plane loading.
ESDU 84018 D-1995 Failure analysis of fibre reinforced composite laminates.
ESDU 03001-2003 Elastic buckling of long@ flat@ symmetrically-laminated (AsBoDf)@ composite stiffened panels and struts in compression
ESDU 03001 A-2008 Elastic buckling of long@ flat@ symmetrically-laminated (AsBoDf)@ composite stiffened panels and struts in compression.

International Federation of Trucks and Engines, Composite interface

NAVISTAR TMS 7083-1994 VOID - Trim Panel Composite, Polystyrene Foam Core
NAVISTAR MPAPS D-7133-2014 Material, Process and Quality Control Requirements for Liquid Composite Molded Parts
NAVISTAR TMS 7133-2015 VOID - Material, Process and Quality Control Requirements for Liquid Composite Molded Parts

Aerospace, Security and Defence Industries Association of Europe (ASD), Composite interface

ASD-STAN PREN 3796-1997 Aerospace Series Anaerobic Polymerisable Compounds Test Method Determination of Ability of Anaerobic Polymerisable Compounds to Set on Metal Surfaces (Edition P1)

CEN - European Committee for Standardization, Composite interface

PREN 15534-5-2019 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5: Specifications for cladding profiles and tiles

AENOR, Composite interface

UNE-EN 15534-4:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 4: Specifications for decking profiles and tiles
UNE-EN 15534-5:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5: Specifications for cladding profiles and tiles
UNE-CEN/TS 15534-2:2008 EX Wood-plastics composites (WPC) - Part 2: Characterisation of WPC materials
UNE-EN ISO 14126:2001 FIBRE-REINFORCED PLASTIC COMPOSITES. DETERMINATION OF COMPRESSIVE PROPERTIES IN THE IN-PLANE DIRECTION. (ISO 14126:1999)
UNE-EN 13421:2006 Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites
UNE 64017:1971 COMPOUND FEEDS AND RAW MATERIALS. QUANTITATIVE DETERMINATION OF PHOSPHOROUS. COLORIMETRIC METHOD OF PHOSPHONIOLIBDOVANTE.
UNE-EN ISO 15310:2006 Fibre-reinforced plastic composites - Determination of the in-plane shear modulus by the plate twist method (ISO 15310:1999)
UNE-EN 14233:2003 Materials and articles in contact with foodstuffs - Plastics - Determination of temperature of plastics materials and articles at the plastics/food interface during microwave and conventional oven heating in order to select the appropriate temperature for
UNE-EN 16245-5:2014 Fibre-reinforced plastic composites. Declaration of raw material characteristics. Part 5: Specific requirements for core materials
UNE-EN ISO 14125:1999 FIBRE-REINFORCED PLASTICS COMPOSITES. DETERMINATION OF FLEXURAL PROPERTIES (ISO 14125:1998)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Composite interface

GB/T 34445-2017 Test method of hot-tack property for heat sealing surfaces of thermoplastic polymer and thermoplastic composite material

GM North America, Composite interface

GM GM9003P-1988 Corrosion Test for Seal Compounds

GM Daewoo, Composite interface

GMKOREA EDS-M-6683-2010

Compressed Gas Association (U.S.), Composite interface

CGA C-22-2012 WATER CORROSION OF COMPOSITES WITH AA6061 LINERS

American Society of Mechanical Engineers (ASME), Composite interface

ASME STP-PT-017-2008 Properties for Composite Materials in Hydrogen Science

Lithuanian Standards Office , Composite interface

LST EN ISO 14126:2001 Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction (ISO 14126:1999)
LST EN ISO 14126:2001/AC:2004 Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction (ISO 14126:1999/Cor.1:2001)
LST EN 13421-2006 Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites
LST EN ISO 15310:2005 Fibre-reinforced plastic composites - Determination of the in-plane shear modulus by the plate twist method (ISO 15310:1999)
LST EN 14233-2003 Materials and articles in contact with foodstuffs - Plastics - Determination of temperature of plastics materials and articles at the plastics/food interface during microwave and conventional oven heating in order to select the appropriate temperature for
LST EN 1007-3-2003 Advanced technical ceramics - Ceramic composites - Methods of test for reinforcement - Part 3: Determination of filament diameter and cross-section area
LST EN ISO 14125+AC:2002 Fibre-reinforced plastic composites - Determination of flexural properties (ISO 14125:1998)

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Composite interface

GJB 5452-2005 Specification for polyurethane primer and top coat for helicoptercomposite materials

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Composite interface

IPC TM-650 2.1.5-1982 Surface Examination, Unclad and Metal Clad Material; Revision A - December 1982

BELST, Composite interface

STB 1064-97 Floor tiles from thermoplastic material. Composites. Specifications
STB 1227-2000 Sanitary wares on the base of composite materials. Specifications
STB 1065-97 Roof tile from thermoplastic material composites. Specifications
STB 1345-2002 Cold asphalt mix for repairing of road pavements. Technical conditions
STB 2200-2011 Materials polymeric composite. Methods of definition of colour stability under influence of artificial climatic factors
STB GOST R 50302-2003 Regrind-able super-hand material (composite) tipped cartridges for tool-holders. Specifications
STB 1509-2004 Storage emulsion - aggregate mixtures for repairing of road pavements. Specifications

US-FCR, Composite interface

FCR COE MOGS-02365-1983 PILING; COMPOSITE, WOOD AND CAST-IN-PLACE CONCRETE, UNIFORM TAPER AND CONSTANT SECTION

U.S. Military Regulations and Norms, Composite interface

ARMY MIL-HDBK-17-1 F-2002 VOLUME 1. POLYMER MATRIX COMPOSITES GUIDELINES FOR CHARACTERIZATION OF STRUCTURAL MATERIALS
ARMY MIL-HDBK-793-1989 NONDESTRUCTIVE TESTING TECHNIQUES FOR STRUCTURAL COMPOSITES
ARMY MIL-HDBK-793 VALID NOTICE 1-2013 NONDESTRUCTIVE TESTING TECHNIQUES FOR STRUCTURAL COMPOSITES
ARMY MIL-HDBK-754-1991 PLASTIC MATRIX COMPOSITES WITH CONTINUOUS FIBER REINFORCEMENT
ARMY MIL-HDBK-787 VALID NOTICE 1-1993 NONDESTRUCTIVE TESTING METHODS OF COMPOSITE MATERIALS-ULTRASONIC
ARMY MIL-HDBK-787-1988 NONDESTRUCTIVE TESTING METHODS OF COMPOSITE MATERIALS-ULTRASONIC
ARMY MIL-HDBK-731 VALID NOTICE 1-1992 NONDESTRUCTIVE TESTING METHODS OF COMPOSITE MATERIALS - THERMOGRAPHY
ARMY MIL-HDBK-731-1984 NONDESTRUCTIVE TESTING METHODS OF COMPOSITE MATERIALS - THERMOGRAPHY
ARMY MIL-HDBK-733 VALID NOTICE 1-1992 NONDESTRUCTIVE TESTING METHODS OF COMPOSITE MATERIALS - RADIOGRAPHY
ARMY MIL-HDBK-733-1986 NONDESTRUCTIVE TESTING METHODS OF COMPOSITE MATERIALS - RADIOGRAPHY
ARMY MIL-HDBK-732 A-1991 NONDESTRUCTIVE TESTING METHODS OF COMPOSITE MATERIALS ACOUSTIC EMISSION

Standard Association of Australia （SAA）, Composite interface

AS/NZS 5024(Int):2005 Potting mixes, composts and other matrices - Examination for legionellae
AS 3558.4:1999 Methods of testing plastics and composite materials sanitary plumbing fixtures - Determination of resistance to surface scratching
AS 1145.5:2001 Determination of tensile properties of plastics materials - Test conditions for fibre-reinforced plastic composites
AS 3558.23:1999 Methods of testing plastics and composite materials sanitary plumbing fixtures - Determination of resistance to heat of the surface of sinks
AS 3558.24:1999 Methods of testing plastics and composite materials sanitary plumbing fixtures - Determination of resistance to hot liquids of the surface of sinks
AS 3558.6:1999 Methods of testing plastics and composite materials sanitary plumbing fixtures - Visual examination of surface finish for defects

United States Navy, Composite interface

NAVY MIL-C-81904 B (1)-1992 COATING COMPOUND, THERMAL-INSULATION, ABLATIVE
NAVY MIL-C-81904 B-1991 COATING COMPOUND, THERMAL-INSULATION, ABLATIVE

工业和信息化部, Composite interface

JC/T 2555-2019 Wood plastic composites for 3D printing

ACI - American Concrete Institute, Composite interface

ACI 364.5T-2010 Importance of Modulus of Elasticity in Surface Repair Materials
ACI SP-324-2018 Composites with Inorganic Matrix for Repair of Concrete and Masonry Structures

AT-ON, Composite interface

ONORM S 2109-2-2000 Destruction of documents and data-Plastics and composite materials

Underwriters Laboratories (UL), Composite interface

UL 1694-1997 Tests for flammability of small polymeric component materials

国家市场监督管理总局、中国国家标准化管理委员会, Composite interface

GB/T 37897-2019 Fibre-reinforced plastic composites—Determination of the in-plane shear modulus by the plate twist method

RO-ASRO, Composite interface

STAS 10259-1981 BOARD FOR STUFFING USED IN TEMPERATE CLIMATE
STAS 8364-1989 VENEERS, PLYWOODS AND BOARDS OF LIGNOCELLULOSIC MATERIALS Minimum radius curve determination

GM Europe, Composite interface

GME TM 374200-2002 Akustische Anforderungen an Werkstoffverbund Acoustical Requirements to Material Compound English/German

American National Standards Institute （ANSI), Composite interface

ANSI/AWWA D107-2010 Composite Elevated Tanks for Water Storage
ANSI H35.5-1993 Nomenclature System for Aluminum Metal Matrix Composite Materials
ANSI H35.5-2013 Standard Nomenclature System for Aluminum Metal Matrix Composites

National Aeronautics and Space Administration (NASA), Composite interface

NASA-CR-2057-1972 Tensile failure criteria for fiber composite materials

AIA/NAS - Aerospace Industries Association of America Inc., Composite interface

NAS2014-1991 Pin-Rivet@ Grooved; and Collar for Composite Materials
NAS2014-2012 PIN@ RIVET@ GROOVED@ AND COLLAR@ FOR COMPOSITE MATERIALS (Rev 1)

WRC - Welding Research Council, Composite interface

BULLETIN 207-1975 JOINING OF METAL-MATRIX FIBER-REINFORCED COMPOSITE MATERIALS
BULLETIN 385-1993 JOINING OF 6061 ALUMINUM MATRIX-CERAMIC PARTICLE REINFORCED COMPOSITES

American Welding Society (AWS), Composite interface

WRC 207:1975 Joining of Metal-Matrix Fiber-Reinforced Composite Materials
WRC 385:1993 Joining of 6061 Aluminum Matrix-Ceramic Particle Reinforced Composites

European Committee for Electrotechnical Standardization（CENELEC）, Composite interface

EN 60626-3:2008/corrigendum Oct. 2008 Combined flexible materials for electrical insulation - Part 3: Specifications for individual materials
EN 60626-3:2008 Combined flexible materials for electrical insulation - Part 3: Specifications for individual materials

Professional Standard - Traffic, Composite interface

JT/T 669-2006 Geosynthetics in highway engineerings Sort, capability demand and test method of composite materials

ZA-SANS, Composite interface

SANS 53121-2:2009 GRP tanks and vessels for use above ground Part 2: Composite materials - Chemical resistance

Professional Standard - Aerospace, Composite interface

QJ 2331A-2014 Process technical requirements for honeycomb sandwich construction carbon/epoxy composite facing

Liaoning Provincial Standard of the People's Republic of China, Composite interface

DB21/T 2837-2017 On-site test method for mass per unit area of polymer waterproof material composite sheet (FS2)

Anhui Provincial Standard of the People's Republic of China, Composite interface

DB34/T 3701-2020 Application guidelines for asphalt pavement subsidence treatment technology of composite organic hydraulic materials

International Electrotechnical Commission (IEC), Composite interface

IEC 62047-31:2019 Semiconductor devices - Micro-electromechanical devices - Part 31: Four-point bending test method for interfacial adhesion energy of layered MEMS materials

Professional Standard - Machinery, Composite interface

JB/T 12074-2014 Quantitative analysis of composition metal.Electron probe microanalysis

(U.S.) Ford Automotive Standards, Composite interface

FORD ESB-M5G31-A-1982 DEADENER, COMPOSITE PAD - ADHESIVE BACKED

ES-AENOR, Composite interface

UNE 84-068-1987

NATO - North Atlantic Treaty Organization, Composite interface

ANEP 45-2002 Electro-Magnetic Compatibility (EMC) in Composite Vessels (ED 2; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2 – 707 5556@ email: nso@nso.nato.int.

IN-BIS, Composite interface

IS 12467-1988