ZH
RU
ES

Thin Film Analysis Test Method

Thin Film Analysis Test Method, Total:500 items.

In the international standard classification, Thin Film Analysis Test Method involves: Rubber and plastics products, Integrated circuits. Microelectronics, Inks. Printing inks, Equipment for the chemical industry, Air quality, Organic chemicals, Paints and varnishes, Linear and angular measurements, Packaging materials and accessories, Electricity. Magnetism. Electrical and magnetic measurements, Ceramics, Road vehicles in general, Surface treatment and coating, Insulating materials, Road engineering, Electrical wires and cables, Electrical accessories, Paint coating processes, Plastics, Optics and optical measurements, Electromechanical components for electronic and telecommunications equipment, Solar energy engineering, Measurement of force, weight and pressure, Analytical chemistry, Sacks. Bags, Glass, Soil quality. Pedology, Water quality, Electrical and electronic testing, Waxes, bituminous materials and other petroleum products, Crude petroleum, Lubricants, industrial oils and related products, Electronic components in general, Semiconducting materials, Photography, Protection of and in buildings, Sports equipment and facilities, Semiconductor devices, Products of the textile industry, Raw materials for rubber and plastics, Equipment for the paper industry, Construction materials, Products of the chemical industry, Equipment for petroleum and natural gas industries, Inorganic chemicals, Sugar. Sugar products. Starch, Paint ingredients, Manufacturing processes in the rubber and plastics industries, Non-ferrous metals, Products of non-ferrous metals, Microbiology, Sensory analysis, Veterinary medicine, Farming and forestry, Cans. Tins. Tubes, Fuels.

Japanese Industrial Standards Committee (JISC), Thin Film Analysis Test Method

JIS K 7196:1991 Testing method for softening temperature of thermoplastics film and sheeting by thermomechanical analysis
JIS K 7126:1987 Testing method for gas transmission rate through plastic film and sheeting
JIS K 3832:1990 Testing methods for bubble point of membrane filters
JIS K 5601-4-1:2003 Testing methods for paint components -- Part 4: Analysis for components emitted from film -- Section 1: Formaldehyde
JIS K 3831:1990 Testing methods for initial flow rate of membrance filters
JIS K 3833:1990 Testing methods for diffusive flow through membrane filters
JIS K 5601-4-1:2012 Testing methods for paint components.Part 4: Analysis for components emitted from film.Section 1: Determination of Formaldehyde emission
JIS K 7131:1994 Testing method for thermally stimulated current of plastic films
JIS K 6766:1977 Testing methods for polyethylene coatings on metals
JIS K 3835:1990 Testing methods for determining bacterial retention of membrane filters
JIS K 7196 AMD 1:2012 Testing method for softening temperature of thermoplastic film and sheeting by thermomechanical analysis (Amendment 1)
JIS K 5601-4-2:2008 Testing methods for paint components -- Part 4 : Analysis for components emitted from film -- Section 2 : Volatile organic compounds
JIS K 7129:1992 Testing methods for water vapor transmission rate of plastic film and sheeting (instrument method)
JIS K 3834:1990 Testing methods for specific resistivity recovery characteristic of water filtered by membranes
JIS K 6768:1995 Testing method of wettability of polyethylene and polypropylene films
JIS R 1636:1998 Test method for thickness of fine ceramic thin films -- Film thickness by contact probe profilometer
JIS R 1683:2007 Test method for surface roughness of ceramic thin films by atomic force microscopy
JIS R 1683:2014 Test method for surface roughness of ceramic thin films by atomic force microscopy
JIS K 5600-4-5 ERRATUM 1:2002 Testing methods for paints -- Part 4: Visual characteristics of film -- Section 5: Colorimetry (Measurement) (Erratum 1)
JIS K 7129-7:2016 Plastics -- Film and sheeting -- Determination of water vapour transmission rate -- Part 7: Calcium corrosion method
JIS C 5630-2:2009 Semiconductor devices -- Micro-electromechanical devices-- Part 2: Tensile testing method of thin film materials
JIS K 5600-1-7 ERRATUM 1:2002 Testing methods for paints -- Part 1: General rule -- Section 7: Determination of film thickness (Erratum 1)
JIS C 5630-6:2011 Semiconductor devices -- Micro-electromechanical devices -- Part 6: Axial fatigue testing methods of thin film materials
JIS K 7129-5:2016 Plastics -- Film and sheeting -- Determination of water vapour transmission rate -- Part 5: Pressure sensor method
JIS R 1637:1998 Test method for resistivity of conductive fine ceramic thin films with a four-point probe array
JIS H 8688:1998 Test method for determination of mass per unit area of anodic oxide coatings on aluminium and aluminium alloys -- Gravimetric method
JIS K 5600-7-6:2002 Testing methods for paints -- Part 7: Long-period performance of film -- Section 6: Natural weathering

Group Standards of the People's Republic of China, Thin Film Analysis Test Method

T/CSTM 00537-2021 Phase transition temperature measurement of micro-nano thin film -Optical power analysis
T/XAI 9-2021 The test method for solder resist hardness of COF
T/XAI 7-2021 The test method for bending of COF
T/XAI 8-2021 The test method for tin thickness of COF—Coulomb method
T/XAI 12-2021 The method for electrical testing of COF tape
T/CSPSTC 25-2019 Test method for thin-film amorphous silicon based photovoltaic (PV) modules Light Induced Degration (LID)
T/XAI 13-2023 The test method for Peeling of COF
T/CSTM 00313-2021 Testing method of optical constants for 0ptical thin films based on spectro-photo-metric method

German Institute for Standardization, Thin Film Analysis Test Method

DIN 55543-1:2010-01 Packaging test - Test methods for packaging films - Part 1: Determination of the film thickness
DIN 55543-4:2010 Packaging test - Test methods for packaging films - Part 4: Determination of the shrinkage of polyethylene films
DIN 55543-4:2017-03 Packaging test - Test methods for packaging films - Part 4: Determination of the shrinkage of plastic films in a liquid bath
DIN 55543-4:2017 Packaging test - Test methods for packaging films - Part 4: Determination of the shrinkage of plastic films in a liquid bath
DIN 55543-6:2019-04 Packaging test - Test methods for packaging films - Part 6: Determination of grammage
DIN 55543-1:1986 Packaging test; test methods for plastic sacks; determination of the film thickness
DIN 55403:2014 Packaging test - Test method for packaging films - Determination of the tendency to curl
DIN 55543-5:2017-10 Packaging Test - Test methods for packaging films - Part 5: Determination of adhesion strength
DIN 53380-2:2006-11 Testing of plastics - Determination of gas transmission rate - Part 2: Manometric method for testing of plastic films
DIN 55403:2014-07 Packaging test - Test method for packaging films - Determination of the tendency to curl
DIN EN 13523-17:2018 Coil coated metals - Test methods - Part 17: Adhesion of strippable films; German and English version prEN 13523-17:2018
DIN EN 13523-17:2019-12 Coil coated metals - Test methods - Part 17: Adhesion of strippable films; German version EN 13523-17:2019
DIN EN 62047-2:2007-02 Semiconductor devices - Micro-electromechanical devices - Part 2: Tensile testing method of thin film materials (IEC 62047-2:2006); German version EN 62047-2:2006
DIN 55543-3:2010-06 Packaging test - Test methods for packaging films - Part 3: Determination of the strength of longitudinal seams of sacks and bags
DIN 55543-4:1985 Testing of packaging; methods of test for plastic sacks; determination of the shrinkage of polyethylene films
DIN EN 62047-18:2014-04 Semiconductor devices - Micro-electromechanical devices - Part 18: Bend testing methods of thin film materials (IEC 62047-18:2013); German version EN 62047-18:2013
DIN 55543-2:2011-05 Packaging test - Test methods for packaging films - Part 2: Determination of peel resistance of glued seams of sacks
DIN EN 62047-17:2015-12 Semiconductor devices - Micro-electromechanical devices - Part 17: Bulge test method for measuring mechanical properties of thin films (IEC 62047-17:2015); German version EN 62047-17:2015
DIN EN ISO 23900-6:2018-11 Pigments and extenders - Methods of dispersion and assessment of dispersability in plastics - Part 6: Determination by film test (ISO 23900-6:2015); German version EN ISO 23900-6:2018
DIN EN 61234-1:1994 Method of test for the hydrolytic stability of electrical insulating materials - Part 1: Plastic films (IEC 61234-1:1994); German version EN 61234-1:1994
DIN EN ISO 4120:2021-06 Sensory analysis - Methodology - Triangle test (ISO 4120:2021); German version EN ISO 4120:2021
DIN 55543-1:2010 Packaging test - Test methods for packaging films - Part 1: Determination of the film thickness
DIN IEC 60746-4:1996 Expression of performance of electrochemical analyzers - Part 4: Dissolved oxygen in water measured by membrane covered amperometric sensors (IEC 60746-4:1992)
DIN EN 13523-17:2019 Coil coated metals - Test methods - Part 17: Adhesion of strippable films
DIN EN 13523-17:2012 Coil coated metals - Test methods - Part 17: Adhesion of strippable films; German version EN 13523-17:2011
DIN ISO 7765-2:2009 Plastics film and sheeting - Determination of impact resistance by the free-falling dart method - Part 2: Instrumented puncture test (ISO 7765-2:1994); English version of DIN ISO 7765-2:2009-02
DIN EN ISO 10399:2018-04 Sensory analysis - Methodology - Duo-trio test (ISO 10399:2017); German version EN ISO 10399:2018

Korean Agency for Technology and Standards (KATS), Thin Film Analysis Test Method

KS M 3005-2002(2022) Testing method for softening temperature of thermoplastic film and sheet by thermomechanical analysis
KS M 3005-2002(2017) Testing method for softening temperature of thermoplastic film and sheet by thermomechanical analysis
KS M 3052-2002 TESTING METHOD FOR GAS TRANSMISSION RATE THROUGH PLASTIC FILM AND SHEETING
KS F 2347-2007 Testing method for density of soil in place by the rubber-ballon method
KS F 2347-1982 Testing method for density of soil in place by the rubber-ballon method
KS M 3029-2002 TEST METHOD FOR TEAR PROPAGATION RESISTANCE OF PLASTIC FILM AND THIN SHEETING BY A SINGLETEAR METHOD
KS C IEC 60674-2-2014(2019) Specification for plastic films for electrical purposes ― Part 2: Methods of test
KS M 2258-2007(2017) Testing method for effect of heat on thin-film of asphaltic materials
KS M 3053-1990(2001) TESTING METHOD FOR STATIC AND KINETIC COEFFICIENTS OF FRICTION OF PLASTIC FILMS AND SHEETS
KS L 2108-2001(2016) Testing methods for adhesion of thin films on glass substrate
KS I 3210-2016(2021) Testing methods for specific resistivity recoverycharacteristic of water filtered by membranes
KS L 1619-2013(2018) Testing methods for resistivity of conductive fine ceramic thin films with four point probe array
KS M 3005-2002 Testing method for softening temperature of thermoplastic film and sheet by thermomechanical analysis
KS M 3088-2009 Testing methods for water vapor transmission rate of plastic film and sheeting(instrument method)
KS L 1620-2013(2018) Test methods for measuring resistivity of electrically conductive ceramic thin films with Van der Pauw method
KS M 6690-2008(2018) The standard preparation methods of dried or vulcanized compounded latex films for testing
KS M 6690-1986 The standard preparation methods of dried or vulcanized compounded latex films for testing
KS M ISO 4591-2007(2022) Plastics－Film and sheeting－Determiantion of average thickness of a sample, and average thickness and yield of a roll,by gravimetric techniques(gravimetric thickness)
KS M ISO 4591:2007 Plastics-Film and sheeting-Determiantion of average thickness of a sample, and average thickness and yield of a roll,by gravimetric techniques(gravimetric thickness)
KS C IEC 60648-2014(2019) Method of test for coefficients of friction of plastic film and sheeting for use as electrical insulation
KS C IEC 61234-1-2002(2017) Method of test for the hydrolytic stability of electrical insulating materials－Part 1：Plastic films
KS C IEC 61234-1-2002(2022) Method of test for the hydrolytic stability of electrical insulating materials－Part 1：Plastic films
KS M 2452-2003 Test method for oxidation stability of gasoline automotive engine oils by thin-film oxygen uptake(TFOUT)
KS C IEC 61234-1:2002 Method of test for the hydrolytic stability of electrical insulating materials－Part 1：Plastic films
KS M 3053-2002 TESTING METHOD FOR STATIC AND KINETIC COEFFICIENTS OF FRICTION OF PLASTIC FILMS AND SHEETS
KS M ISO 7765-2-2002(2017) Plastics film and sheeting－Determination of impact resistance by the free－falling dart method－Part 2：Instrumented puncture test
KS M ISO 7765-2-2002(2022) Plastics film and sheeting－Determination of impact resistance by the free－falling dart method－Part 2：Instrumented puncture test

American National Standards Institute （ANSI), Thin Film Analysis Test Method

ANSI/ASTM D2457:1997 Test Method for Specular Gloss of Plastic Film and Sheeting
ANSI/ASTM D2923:2001 Test Method for Rigidity of Polyolefin Film and Sheeting (08.02)
ANSI/ASTM D2732:1997 Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting
ANSI/ASTM D2861:1998 Test Methods for Flexible Composites of Copper Foil with Dielectric Film or Treated Fabrics
ANSI/ASTM D5946:2001 Test Method for Corona-Treated Polymer Films Using Water Contact Angle Measurements

国家市场监督管理总局、中国国家标准化管理委员会, Thin Film Analysis Test Method

GB/T 37841-2019 Test method for puncture resistance of plastic film and sheeting
GB/T 40293-2021 Test method for refractive index of infrared optical chalcogenide films
GB/T 13542.2-2021 Plastic films for electrical purposes—Part 2: Methods of test
GB/T 37206-2018 Test method for antibacterial properties of organic separation membrane

American Society for Testing and Materials (ASTM), Thin Film Analysis Test Method

ASTM D1434-82(2003) Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting
ASTM E252-05 Standard Test Method for Thickness of Thin Foil, Sheet, and Film by Mass Measurement
ASTM F390-11 Standard Test Method for Sheet Resistance of Thin Metallic Films With a Collinear Four-Probe Array
ASTM F1151-88(1998) Standard Test Method for Determining Variations in Hardness of Film Ribbon Pancakes
ASTM E252-04 Standard Test Method for Thickness of Thin Foil and Film by Mass Measuerment
ASTM D3633-98 Standard Test Method for Electrical Resistivity of Membrane-Pavement Systems
ASTM D3633-98(2006) Standard Test Method for Electrical Resistivity of Membrane-Pavement Systems
ASTM D1746-97 Standard Test Method for Transparency of Plastic Sheeting
ASTM D1746-03 Standard Test Method for Transparency of Plastic Sheeting
ASTM D1676-17 Standard Test Methods for Film-Insulated Magnet Wire
ASTM D1746-23 Standard Test Method for Transparency of Plastic Sheeting
ASTM F2750-09 Standard Test Method for Determining the Effects of Bending a Membrane Switch or Assembly
ASTM E252-84(1999) Standard Test Method for Thickness of Thin Foil and Film by Weighing
ASTM D3363-22 Standard Test Method for Film Hardness by Pencil Test
ASTM E252-06 Standard Test Method for Thickness of Foil, Thin Sheet, and Film by Mass Measurement
ASTM D3363-05(2011)e1 Standard Test Method for Film Hardness by Pencil Test
ASTM D3363-00 Standard Test Method for Film Hardness by Pencil Test
ASTM D3363-20 Standard Test Method for Film Hardness by Pencil Test
ASTM F1682-96 Standard Test Method for Determining Travel of a Membrane Switch
ASTM F1682-02 Standard Test Method for Determining Travel of a Membrane Switch
ASTM F1663-95 Standard Test Method for Determining the Capacitance of a Membrane Switch
ASTM F1663-95(2002) Standard Test Method for Determining the Capacitance of a Membrane Switch
ASTM F1663-09 Standard Test Method for Determining the Capacitance of a Membrane Switch
ASTM D4321-04 Standard Test Method for Package Yield of Plastic Film
ASTM D1434-82(1998) Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting
ASTM D1434-82(2009)e1 Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting
ASTM D1434-82(2015)e1 Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting
ASTM F1570-94 Standard Test Method for Determining the Tactile Ratio of a Membrane Switch
ASTM F1570-01 Standard Test Method for Determining the Tactile Ratio of a Membrane Switch
ASTM F2592-16 Standard Test Method for Measuring the Force-Displacement of a Membrane Switch
ASTM F2592-08 Standard Test Method for Measuring the Force-Displacement of a Membrane Switch
ASTM F218-95(2000) Standard Test Method for Analyzing Stress in Glass
ASTM F2188-02(2019) Standard Test Method for Determining the Effect of Variable Frequency Vibration on a Membrane Switch or Membrane Switch Assembly
ASTM D2732-08 Standard Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting
ASTM D4198-20 Standard Test Methods for Evaluating Absorbent Pads Used with Membrane Filters for Bacteriological Analysis and Growth
ASTM F2187-02 Standard Test Method for Determining the Effect of Random Frequency Vibration on a Membrane Switch or Membrane Switch Assembly
ASTM F2592-07a Standard Test Method for Measuring the Force-Displacement of a Membrane Switch
ASTM F2592-07 Standard Test Method for Measuring the Force-Displacement of a Membrane Switch
ASTM F1661-96 Standard Test Method for Determining the Contact Bounce Time of a Membrane Switch
ASTM F1661-96(2002) Standard Test Method for Determining the Contact Bounce Time of a Membrane Switch
ASTM F1680-02 Standard Test Method for Determining Circuit Resistance of a Membrane Switch
ASTM F1689-05 Standard Test Method for Determining the Insulation Resistance of a Membrane Switch
ASTM F1661-08 Standard Test Method for Determining the Contact Bounce Time of a Membrane Switch
ASTM F1689-02 Standard Test Method for Determining the Insulation Resistance of a Membrane Switch
ASTM F1689-96 Standard Test Method for Determining the Insulation Resistance of a Membrane Switch
ASTM D3861-91(1998) Standard Test Method for Quantity of Water-Extractable Matter in Membrane Filters
ASTM F2592-06 Standard Test Method for Measuring the Force-Displacement of a Membrane Switch
ASTM F1661-09 Standard Test Method for Determining the Contact Bounce Time of a Membrane Switch
ASTM D1676-03(2011) Standard Test Methods for Film-Insulated Magnet Wire
ASTM F1689-05(2012) Standard Test Method for Determining the Insulation Resistance of a Membrane Switch
ASTM F2592-09 Standard Test Method for Measuring the Force-Displacement of a Membrane Switch
ASTM F2592-10 Standard Test Method for Measuring the Force-Displacement of a Membrane Switch
ASTM D2582-00 Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting
ASTM D4807-88(1999) Standard Test Method for Sediment in Crude Oil by Membrane Filtration
ASTM D4807-05(2010) Standard Test Method for Sediment in Crude Oil by Membrane Filtration
ASTM D4055-04 Standard Test Method for Pentane Insolubles by Membrane Filtration
ASTM F2188-02 Standard Test Method for Determining the Effect of Variable Frequency Vibration on a Membrane Switch or Membrane Switch Assembly
ASTM E252-06(2013) Standard Test Method for Thickness of Foil, Thin Sheet, and Film by Mass Measurement
ASTM F1680-07 Standard Test Method for Determining Circuit Resistance of a Membrane Switch
ASTM F1680-07a Standard Test Method for Determining Circuit Resistance of a Membrane Switch
ASTM D4055-02 Standard Test Method for Pentane Insolubles by Membrane Filtration
ASTM D1922-06 Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
ASTM D1922-06a Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
ASTM D1922-15(2020) Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
ASTM D1922-00a Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
ASTM D1922-15 Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
ASTM D1922-08 Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
ASTM D1922-09 Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
ASTM E2244-05 Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer
ASTM E2244-11 Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer
ASTM E2244-11(2018) Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer
ASTM D2582-21 Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting
ASTM D2582-08 Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting
ASTM D2582-16 Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting
ASTM D1709-04 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
ASTM D1709-03 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
ASTM D1389-06 Standard Test Method for Proof-Voltage Testing of Thin Solid Electrical Insulating Materials
ASTM F1812-02 Standard Test Method for Determining the Effectiveness of Membrane Switch ESD Shielding
ASTM F1597-01 Standard Test Method for Determining the Actuation Force and Contact Force of a Membrane Switch
ASTM F1597-00 Standard Test Method for Determining the Actuation Force and Contact Force of a Membrane Switch
ASTM F1812-97a Standard Test Method for Determining the Effectiveness of Membrane Switch ESD Shielding
ASTM F1812-09 Standard Test Method for Determining the Effectiveness of Membrane Switch ESD Shielding
ASTM F1681-14 Standard Test Method for Determining Current Carrying Capacity of a Membrane Switch Circuit
ASTM F1680-07a(2014) Standard Test Method for Determining Circuit Resistance of a Membrane Switch
ASTM F1661-09(2015) Standard Test Method for Determining the Contact Bounce Time of a Membrane Switch
ASTM F1597-02 Standard Test Method for Determining the Actuation Force and Contact Force of a Membrane Switch
ASTM D3354-08 Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method
ASTM D1922-03a Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
ASTM D1922-03 Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
ASTM D1922-05 Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
ASTM D1922-23 Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
ASTM D1894-08 Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting
ASTM F3300-18 Standard Test Method for Abrasion Resistance of Flexible Packaging Films Using a Reciprocating Weighted Stylus
ASTM F22-21 Standard Test Method for Hydrophobic Surface Films by the Water-Break Test
ASTM F1997-99(2005) Standard Test Method for Determining the Sensitivity (Teasing) of a Tactile Membrane Switch
ASTM F1997-99 Standard Test Method for Determining the Sensitivity (Teasing) of a Tactile Membrane Switch
ASTM D3354-21 Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method
ASTM D4272-08 Standard Test Method for Total Energy Impact of Plastic Films By Dart Drop
ASTM D4272-08a Standard Test Method for Total Energy Impact of Plastic Films By Dart Drop
ASTM D4272-14 Standard Test Method for Total Energy Impact of Plastic Films By Dart Drop
ASTM D4272/D4272M-15 Standard Test Method for Total Energy Impact of Plastic Films by Dart Drop
ASTM F1261M-96 Standard Test Method for Determining the Average Electrical Width of a Straight, Thin-Film Metal Line [Metric]
ASTM D1239-98 Standard Test Method for Resistance of Plastic Films to Extraction by Chemicals
ASTM D2457-97 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics
ASTM F692-97 Standard Test Method for Measuring Adhesion Strength of Solderable Films to Substrates
ASTM D5884-04a Standard Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes
ASTM D5884-04 Standard Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes
ASTM F2749-09 Standard Test Method for Determining the Effects of Creasing a Membrane Switch or Assembly
ASTM F1570-01e1 Standard Test Method for Determining the Tactile Ratio of a Membrane Switch (Withdrawn 2007)
ASTM F1261M-96(2003) Standard Test Method for Determining the Average Electrical Width of a Straight, Thin-Film Metal Line [Metric]
ASTM D1434-23 Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting
ASTM E252-06(2021)e1 Standard Test Method for Thickness of Foil, Thin Sheet, and Film by Mass Measurement
ASTM D1709-01 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
ASTM D1709-98 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
ASTM D1709-15a Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
ASTM D1709-08 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
ASTM D1709-09 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
ASTM D5796-99 Standard Test Method for Measurement of Dry Film Thickness of Thin Film Coil-Coated Systems by Destructive Means Using a Boring Device
ASTM D5796-20 Standard Test Method for Measurement of Dry Film Thickness of Thin-Film Coil-Coated Systems by Destructive Means Using a Boring Device
ASTM D5796-10(2015) Standard Test Method for Measurement of Dry Film Thickness of Thin-Film Coil-Coated Systems by Destructive Means Using a Boring Device
ASTM D1938-06 Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method
ASTM D1938-02 Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method
ASTM D1938-94 Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method
ASTM D1938-08 Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method
ASTM D2176-16(2021) Standard Test Method for Folding Endurance of Paper and Plastics Film by the M.I.T. Tester
ASTM D6583-04 Standard Test Method for Porosity of Paint Film by Mineral Oil Absorption
ASTM D4885-01(2006) Standard Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method
ASTM F1997-07 Standard Test Method for Determining the Sensitivity (Teasing) of a Tactile Membrane Switch
ASTM D3354-04 Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method
ASTM D3354-96 Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method
ASTM D4885-88(1995) Standard Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method
ASTM D6583-04(2010) Standard Test Method for Porosity of Paint Film by Mineral Oil Absorption
ASTM D3354-11 Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method
ASTM D4885-01(2011) Standard Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method
ASTM D1709-22 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
ASTM D2457-21 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics
ASTM D6636-01(2006) Standard Test Method for Determination of Ply Adhesion Strength of Reinforced Geomembranes
ASTM D6636-01 Standard Test Method for Determination of Ply Adhesion Strength of Reinforced Geomembranes
ASTM D6636-01(2011) Standard Test Method for Determination of Ply Adhesion Strength of Reinforced Geomembranes
ASTM D7281-07(2021) Standard Test Method for Determining Water Migration Resistance Through Roof Membranes
ASTM D4272-09 Standard Test Method for Total Energy Impact of Plastic Films By Dart Drop
ASTM D3210-95(2023) Standard Test Method for Comparing Colors of Films from Water-Emulsion Floor Polishes
ASTM D5796-10 Standard Test Method for Measurement of Dry Film Thickness of Thin Film Coil-Coated Systems by Destructive Means Using a Boring Device
ASTM D6214-98(2003) Standard Test Method for Determining the Integrity of Field Seams Used in Joining Geomembranes by Chemical Fusion Methods
ASTM D6214-98 Standard Test Method for Determining the Integrity of Field Seams Used in Joining Geomembranes by Chemical Fusion Methods
ASTM D6214-98(2008) Standard Test Method for Determining the Integrity of Field Seams Used in Joining Geomembranes by Chemical Fusion Methods
ASTM F3136-22 Standard Test Method for Oxygen Gas Transmission Rate through Plastic Film and Sheeting using a Dynamic Accumulation Method
ASTM D3985-05 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor
ASTM D7575-10e1 Standard Test Method for Solvent-Free Membrane Recoverable Oil and Grease by Infrared Determination
ASTM E223-96 Standard Test Methods for Analysis of Sulfuric Acid
ASTM E223-96(2002)e1 Standard Test Methods for Analysis of Sulfuric Acid
ASTM E224-96(2002) Standard Test Methods for Analysis of Hydrochloric Acid
ASTM E224-96 Standard Test Methods for Analysis of Hydrochloric Acid
ASTM D1204-02 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
ASTM D1204-94e1 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
ASTM D6392-99(2006) Standard Test Method for Determining the Integrity of Nonreinforced Geomembrane Seams Produced Using Thermo-Fusion Methods
ASTM D6392-99 Standard Test Method for Determining the Integrity of Nonreinforced Geomembrane Seams Produced Using Thermo-Fusion Methods
ASTM D6392-08 Standard Test Method for Determining the Integrity of Nonreinforced Geomembrane Seams Produced Using Thermo-Fusion Methods
ASTM D1709-16 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
ASTM D1709-16a Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
ASTM D4272/D4272M-23 Standard Test Method for Total Energy Impact of Plastic Films by Dart Drop
ASTM D4881-97 Standard Test Method for Thermal Endurance of Varnished Fibrous- or Film-Wrapped Magnet Wire
ASTM F2359-04(2011) Standard Test Method for Determining Color of a Membrane Switch Backlit with Diffuse Light Source
ASTM F1681-07 Standard Test Method for Determining Current Carrying Capacity of a Conductor as Part of a Membrane Switch Circuit
ASTM F1681-07a Standard Test Method for Determining Current Carrying Capacity of a Conductor as Part of a Membrane Switch Circuit
ASTM D1004-21 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting
ASTM F1762-14 Standard Test Method for Determining the Effects of Atmospheric Pressure Variation on a Membrane Switch
ASTM F2360-08(2015)e1 Standard Test Method for Determining Luminance of a Membrane Switch Backlit with Diffuse Light Source
ASTM F2359-04(2019) Standard Test Method for Determining Color of a Membrane Switch Backlit with Diffuse Light Source
ASTM D4881-05(2017) Standard Test Method for Thermal Endurance of Varnished Fibrous- or Film-Wrapped Magnet Wire
ASTM D1239-14 Standard Test Method for Resistance of Plastic Films to Extraction by Chemicals
ASTM D1004-08 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting
ASTM D5946-04 Standard Test Method for Corona-Treated Polymer Films Using Water Contact Angle Measurements
ASTM D6580-00(2005) Standard Test Method for the Determination of Metallic Zinc Content in Both Zinc Dust Pigment and in Cured Films of Zinc-Rich Coatings
ASTM D6580-00 Standard Test Method for the Determination of Metallic Zinc Content in Both Zinc Dust Pigment and in Cured Films of Zinc-Rich Coatings
ASTM D6580-00(2009) Standard Test Method for the Determination of Metallic Zinc Content in Both Zinc Dust Pigment and in Cured Films of Zinc-Rich Coatings
ASTM D7272-06 Standard Test Method for Determining the Integrity of Seams Used in Joining Geomembranes by Pre-manufactured Taped Methods
ASTM D4272-03 Standard Test Method for Total Energy Impact of Plastic Films By Dart Drop
ASTM D6392-12 Standard Test Method for Determining the Integrity of Nonreinforced Geomembrane Seams Produced Using Thermo-Fusion Methods
ASTM D1938-19 Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method
ASTM F3300-23 Standard Test Method for Abrasion Resistance of Flexible Packaging Films Using a Reciprocating Weighted Stylus
ASTM D5884-99 Standard Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes
ASTM D5884-01 Standard Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes
ASTM E2246-02 Standard Test Method for Strain Gradient Measurements of Thin, Reflecting Films Using an Optical Interferometer
ASTM D2861-87(1998) Standard Test Methods for Flexible Composites of Copper Foil with Dielectric Film or Treated Fabrics
ASTM E2246-05 Standard Test Method for Strain Gradient Measurements of Thin, Reflecting Films Using an Optical Interferometer
ASTM E2244-02 Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer
ASTM E2245-05 Standard Test Method for Residual Strain Measurements of Thin, Reflecting Films Using an Optical Interferometer
ASTM F1681-96(2002) Standard Test Method for Determining Current Carrying Capacity of a Conductor as Part of a Membrane Switch Circuit
ASTM F1681-96 Standard Test Method for Determining Current Carrying Capacity of a Conductor as Part of a Membrane Switch Circuit
ASTM E2245-02 Standard Test Method for Residual Strain Measurements of Thin, Reflecting Films Using an Optical Interferometer
ASTM D3539-87(2004) Standard Test Methods for Evaporation Rates of Volatile Liquids by Shell Thin-Film Evaporometer
ASTM E2246-11 Standard Test Method for Strain Gradient Measurements of Thin, Reflecting Films Using an Optical Interferometer
ASTM D5796-03 Standard Test Method for Measurement of Dry Film Thickness of Thin Film Coil-Coated Systems by Destructive Means Using a Boring Device
ASTM D5796-03(2010) Standard Test Method for Measurement of Dry Film Thickness of Thin Film Coil-Coated Systems by Destructive Means Using a Boring Device
ASTM D8331/D8331M-20 Standard Test Method for Measurement of Film Thickness of Thin-Film Coatings by Non-Destructive Means Using Ruggedized Optical Interference
ASTM D5916-96(2002) Standard Test Method for Detection and Enumeration of Clostridium perfringens from Water and Extracted Sediments by Membrane Filtration (MF)
ASTM D5916-96 Standard Test Method for Detection and Enumeration of Clostridium perfringens from Water and Extracted Sediments by Membrane Filtration (MF)
ASTM E3009-23 Standard Test Method for Sensory Analysis—Tetrad Test
ASTM F1598-95(2007) Standard Test Method for Determining the Effects of Chemical/Solvent Exposure to a Membrane Switch/Graphic Overlay (Spot Test Method)
ASTM F1598-95(2002) Standard Test Method for Determining the Effects of Chemical/Solvent Exposure to a Membrane Switch/Graphic Overlay (Spot Test Method)
ASTM F1598-95 Standard Test Method for Determining the Effects of Chemical/Solvent Exposure to a Membrane Switch/Graphic Overlay (Spot Test Method)
ASTM F1598-95(2014) Standard Test Method for Determining the Effects of Chemical/Solvent Exposure to a Membrane Switch/Graphic Overlay 40;Spot Test Method41;
ASTM F2749-08 Standard Test Method for Determining the Effects of Creasing a Membrane Switch or Assembly
ASTM E2244-11e1 Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer
ASTM E2245-11e1 Standard Test Method for Residual Strain Measurements of Thin, Reflecting Films Using an Optical Interferometer
ASTM E2246-11e1 Standard Test Method for Strain Gradient Measurements of Thin, Reflecting Films Using an Optical Interferometer
ASTM F1663-15 Standard Test Method for Determining the Capacitance of a Membrane Switch or Printed Electronic Device
ASTM F2749-15 Standard Test Method for Determining the Effects of Creasing a Membrane Switch or Printed Electronic Device
ASTM D3985-02e1 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor
ASTM D3985-17 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor
ASTM E870-82(2006) Standard Test Methods for Analysis of Wood Fuels
ASTM E2246-11(2018) Standard Test Method for Strain Gradient Measurements of Thin, Reflecting Films Using an Optical Interferometer
ASTM E2245-11(2018) Standard Test Method for Residual Strain Measurements of Thin, Reflecting Films Using an Optical Interferometer

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Thin Film Analysis Test Method

GB/T 14447-1993 Test method for electrostatic properties of plastic films. Half-life method
GB/T 42674-2023 Optical Functional Thin Film Microstructure Thickness Test Method
GB/T 13542.2-2009 Film for electrical insulation.Part 2:Methods of test
GB/T 27583-2011 Optical functional films.Determination of reflected glare
GB/T 25256-2010 Optical functional films.Release film.The measurement of peeling force at 180°angle and subsequent adhesion
GB/T 6616-2009 Test methods for measuring resistivity of semiconductor wafers or sheet resistance of semiconductor films with a noncontact eddy-current gauge
GB/T 1038.2-2022 Plastics—Film and sheeting—Determination of gas-transmission rate—Part 2:Equal-pressure methods
GB/T 1038.1-2022 Plastics—Film and sheeting—Determination of gas-transmission rate—Part 1:Differential-pressure methods
GB/T 25273-2010 Films for liquid crystal display(LCD).Determination of haze with integrating sphere
GB/T 9639.1-2008 Plastics film and sheeting.Determination of impact resistance by the free-falling dart method.Part1:Staircase method
GB/T 43088-2023 Method for determination of dislocation density in metallic thin crystal specimens by microbeam analysis and electron microscopy
GB/T 11462-1989 Test methods of spectrum analyzers
GB/T 26332.4-2015 Optics and photonics.Optical coatings.Part 4:Specific test methods
GB/T 42269-2022 Determination of pore size for membranes—Gas permeation method
GB/T 25494-2010 Test methods for composition analysis of getters
GB/T 9506.6-1988 Test method for barium film distribution of nitrogen-doped getter

British Standards Institution (BSI), Thin Film Analysis Test Method

BS EN 60674-2:2017+A1:2019 Specification for plastic films for electrical purposes - Methods of test
BS 2782-1 Method 150D:1976 Methods of testing plastics - Thermal properties - Cold crack temperature of film and thin sheeting
BS 2782-8 Method 825A:1996 Methods of testing plastics - Other properties - Film and sheeting - Determination of blocking resistance
PD IEC TS 62804-2:2022 Photovoltaic (PV) modules. Test methods for the detection of potential-induced degradation. Thin-film
BS 2782-3 Method 332A:1976 Methods of testing plastics - Mechanical properties - Stiffness of plastics film
BS 2782 Pt.8 Method 824A:1984 Methods of testing plastics. Other properties. Determination of coefficients of friction of plastics film
BS EN 13900-6:2012 Pigments and extenders. Methods of dispersion and assessment of dispersability in plastics. Determination by film test
BS 6376-1:1983 Reagents for chemical analysis. Methods of test
BS 2782-8 Method 822A:1992 Methods of testing plastics - Other properties - Determination of water vapour transmission rate of plastics films (sachet method)
BS EN 62047-18:2013 Semiconductor devices. Micro-electromechanical devices. Bend testing methods of thin film materials
BS EN ISO 23900-6:2018 Pigments and extenders. Methods of dispersion and assessment of dispersibility in plastics - Determination by film test
BS 2782-5 Method 521A:1992 Methods of testing plastics - Optical and colour properties, weathering - Determination of haze of film and sheet
BS 2782-6 Method 643A:1976 Methods of testing plastics - Dimensional properties - Shrinkage on heating of film intended for shrink wrapping applications
BS EN 61234-1:1994 Method of test for hydrolytic stability of electrical insulating materials. Method of test for hydrolytic stability of electrical insulating materials. Plastic films
BS 2782-3 Method 360C:1991 Methods of testing plastics - Mechanical properties - Determination of tear resistance of plastics film and sheeting by the initiation method
BS 3900-D6:1982 Methods of test for paints. Optical tests on paint films. Determination of contrast ratio (opacity) of light-coloured paints at a fixed spreading rate, using polyester film

工业和信息化部, Thin Film Analysis Test Method

JC/T 2409-2017 Test method for adhesion of fine ceramic films
YS/T 1161.2-2016 Methods of analysis for pseudoboehmite Part 2: Gravimetric method for determination of loss on ignition
YS/T 1161.4-2021 Methods for analysis of pseudoboehmite Part 4: Determination of sodium oxide content

Society of Automotive Engineers (SAE), Thin Film Analysis Test Method

SAE J138-1969 Film Analysis Guides for Dynamic Studies of Test Subjects

SAE - SAE International, Thin Film Analysis Test Method

SAE J138-2019 Performance Requirements for Motor Vehicle Headlamps

Danish Standards Foundation, Thin Film Analysis Test Method

DS/EN 60674-2/A1:2002 Specification for plastic films for electrical purposes - Part 2: Methods of test
DS/EN 60674-2:1999 Specification for plastic films for electrical purposes - Part 2: Methods of test
DS/EN 13523-1:2010 Coil coated metals - Test methods - Part 1: Film thickness
DS/IEC 674-2:1990 Specification for plastic films for electrical purposes. Part 2: Methods of test
DS/EN 13900-6:2013 Pigments and extenders - Methods of dispersion and assessment of dispersability in plastics - Part 6: Determination by film test
DS/EN 61234-1:1998 Method of test for the hydrolytic stability of electrical insulating materials - Part 1: Plastic films
DS/EN 13523-17:2012 Coil coated metals - Test methods - Part 17: Adhesion of strippable films
DS/EN 16284:2013 Packaging - Flexible laminate and plastic tubes - Test method to determine the adhesive strength of the membrane
DS/EN ISO 4120:2007 Sensory analysis - Methodology - Triangle test

AENOR, Thin Film Analysis Test Method

UNE-EN 60674-2:1999 SPECIFICATION FOR PLASTIC FILMS FOR ELECTRICAL PURPOSES. PART 2: METHODS OF TEST.
UNE-EN 60674-2/A1:2002 Specification for plastic films for electrical purposes -- Part 2: Methods of test.
UNE 21376:1986 METHOD OF TEST FOR COEFFICIENTS OF FRICTION OF PLASTIC FILM AND SHEETING FOR USE AS ELECTRICAL INSULATION.
UNE-EN ISO 6383-2:2005 Plastics - Film and sheeting - Determination of tear resistance - Part 2: Elmendorf method (ISO 6383-2:1983)
UNE 53206:2012 Plastics. Large plastic bags made with plastic films. Characteristics and test methods
UNE-EN 13900-6:2013 Pigments and extenders - Methods of dispersion and assessment of dispersability in plastics - Part 6: Determination by film test
UNE-EN 13726-2:2002 Test methods for primary wound dressings. Part 2: Moisture vapour transmission rate of permeable film dressings.
UNE-EN 13523-17:2012 Coil coated metals - Test methods - Part 17: Adhesion of strippable films
UNE-EN 16284:2013 Packaging - Flexible laminate and plastic tubes - Test method to determine the adhesive strength of the membrane
UNE 87016:1986 SENSORY ANALYSIS. METHODOLOGY "A" "NOT A" TEST
UNE 80230:2010 Methods of testing cement. Chemical analysis. Alternative methods.

ES-UNE, Thin Film Analysis Test Method

UNE-EN 60674-2:2017/A1:2019 Specification for plastic films for electrical purposes - Part 2: Methods of test (Endorsed by Asociación Española de Normalización in May of 2019.)
UNE-EN 60674-2:2017/AC:2018-01 Specification for plastic films for electrical purposes - Part 2: Methods of test (Endorsed by Asociación Española de Normalización in March of 2018.)
UNE-EN 60674-2:2017 Specification for plastic films for electrical purposes - Part 2: Methods of test (Endorsed by Asociación Española de Normalización in April of 2017.)
UNE-EN 13523-17:2020 Coil coated metals - Test methods - Part 17: Adhesion of strippable films
UNE-EN 61234-1:1993 METHOD OF TEST FOR THE HYDROSTATIC STABILITY OF ELECTRICAL INSULATING MATERIALS. PART 1: PLASTIC FILMS. (Endorsed by AENOR in November of 1995.)
UNE 53275:2022 Plastics. Specifications and test methods for PE shrink films and their copolymers.
UNE-EN ISO 23900-6:2019 Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 6: Determination by film test (ISO 23900-6:2015)
UNE-EN 62047-18:2013 Semiconductor devices - Micro-electromechanical devices - Part 18: Bend testing methods of thin film materials (Endorsed by AENOR in November of 2013.)
UNE 53954:2017 Plastics. Packaging-stretch polyolefin films for packaging. Characteristics and test methods
UNE-EN 62047-17:2015 Semiconductor devices - Micro-electromechanical devices - Part 17: Bulge test method for measuring mechanical properties of thin films (Endorsed by AENOR in August of 2015.)
UNE-EN 62047-6:2010 Semiconductor devices - Micro-electromechanical devices -- Part 6: Axial fatigue testing methods of thin film materials (Endorsed by AENOR in June of 2010.)
UNE-EN 62047-21:2014 Semiconductor devices - Micro-electromechanical devices - Part 21: Test method for Poisson's ratio of thin film MEMS materials (Endorsed by AENOR in November of 2014.)
UNE-EN ISO 4120:2022 Sensory analysis - Methodology - Triangle test (ISO 4120:2021)
UNE-EN 13726-2:2003 ERRATUM Test methods for primary wound dressings. Part 2: Moisture vapour transmission rate of permeable film dressings.

Association Francaise de Normalisation, Thin Film Analysis Test Method

NF EN 60674-2:2017 Spécification pour les films en matière plastique à usages électriques - Partie 2 : méthodes d'essai.
NF X45-200:1995 Ions separation in liquid phase. Polymeric ion exchange membranes. Characterisation and test methods of homopolar membranes.
NF C26-145-2/A1*NF EN 60674-2/A1:2002 Specification for plastic films for electrical purposes - Part 2 : methods of test
NF C26-145-2*NF EN 60674-2:1998 Specification for plastic films for electrical purposes. . Part 2 : methods of test.
NF C26-145-2/A1*NF EN 60674-2/A1:2019 Specification for plastic films for electrical purposes - Part 2 : methods of test
NF C26-145-2*NF EN 60674-2:2017 Specification for plastic films for electrical purposes - Part 2 : methods of test
NF EN 13523-17:2019 Tôles prélaquées - Méthodes d'essai - Partie 17 : adhérence des films pelables
NF T54-803-1:1994 Plastics. Plasticized polyvinyl chloride membranes for swimming-pools. Specifications and test methods. Part 1 : simple membranes.
NF EN 62047-2:2006 Dispositifs à semiconducteurs - Dispositifs microélectromécaniques - Partie 2 : méthodes d'essais de traction des matériaux en couche mince
NF T54-803-2:1994 Plastics. Plasticized polyvinyl chloride membranes for swimming-pools. Specifications and test methods. Part 2 : reinforced membranes.
NF H34-083*NF EN 16284:2013 Packaging - Flexible laminate and plastic tubes - Test method to determine the adhesive strength of the membrane
NF C26-936/A1:1983 Méthodes d'essai des vernis isolants - Vérification du temps de séchage à l'air des vernis isolants en couche mince.
NF C26-936:1965 Méthodes d'essai des vernis isolants - Vérification du temps de séchage à l'air des vernis isolants en couche mince.
NF EN ISO 23900-6:2018 Pigments et matières de charge - Méthodes de dispersion et évaluation de l'aptitude à la dispersion dans les plastiques - Partie 6 : détermination par essai de film
NF EN 62047-21:2014 Dispositifs à semiconducteurs - Dispositifs microélectromécaniques - Partie 21 : méthode d'essai relative au coefficient de Poisson des matériaux MEMS en couche mince
NF U47-026:2002 Animal health analysis methods - Detection of antibodies against mucosal disease by virus neutralisation test.
NF U47-026:2010 Animal health analysis methods - Detection of antibodies against mucosal disease by virus neutralisation test
NF T31-310-6*NF EN ISO 23900-6:2018 Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 6 : determination by film test
NF T37-001-17:2012 Coil coated metals - Test methods - Part 17 : adhesion of strippable films.
NF T37-001-17*NF EN 13523-17:2019 Coil coated metals - Test methods - Part 17 : adhesion of strippable films
FD T54-193:1997 Plastiques - Films et feuilles à base de polymères pour l'industrie - Critères industriels de caractérisation et méthodes d'essai.
NF T60-182:1990 Produits pétroliers - Méthode d'essai pour déterminer la stabilité des huiles moteur à essence par absorption d'oxygène en couche mince (TFOUT)
NF C26-251:1980 Méthodes d'essai des matières isolantes - Méthode de mesure des coefficients de frottement des films et feuilles de matière plastique utilisés comme isolants électriques.
NF V09-013*NF EN ISO 4120:2021 Sensory analysis - Methodology - Triangle test
NF ISO 8588:2017 Analyse sensorielle - Méthodologie - Essai "A" - "non A"
NF EN ISO 4120:2021 Analyse sensorielle - Méthodologie - Essai triangulaire
NF C96-050-17*NF EN 62047-17:2015 Semiconductor devices - Micro-electromechanical devices - Part 17 : bulge test method for measuring mechanical properties of thin films

Lithuanian Standards Office , Thin Film Analysis Test Method

LST EN 13523-1-2010 Coil coated metals - Test methods - Part 1: Film thickness
LST EN 60674-2-2001/A1-2002 Specification for plastic films for electrical purposes. Part 2: Methods of test (IEC 60674-2:1988/A1:2001)
LST EN 60674-2-2001 Specification for plastic films for electrical purposes. Part 2: Methods of test (IEC 60674-2:1988 + corrigendum 1995)
LST EN ISO 6383-2:2005 Plastics - Film and sheeting - Determination of tear resistance - Part 2: Elmendorf method (ISO 6383-2:1983)
LST EN 13900-6-2013 Pigments and extenders - Methods of dispersion and assessment of dispersability in plastics - Part 6: Determination by film test
LST EN 13523-17-2012 Coil coated metals - Test methods - Part 17: Adhesion of strippable films

GM Daewoo, Thin Film Analysis Test Method

YU-JUS, Thin Film Analysis Test Method

JUS N.A8.231-1995 Specification for plastic films for electrical purposes - Part 2: Methods of test

CU-NC, Thin Film Analysis Test Method

NC 30-71-1988 Plastics Industry. Determination Blocking of Plastic Films Testing Method
NC 30-78-1988 Plastics Industry. Determination of Initial Tearing Strength of Films and Sheets. Testing Method
NC 30-68-1988 Plastics Industry. Determination of Coefficients of Static and Dynamic Friction of Plastic Films. Testing Methods
NC 30-65-1987 Plastics Industry. Determination of Changes in Lineal Dimensions of. Thermoplastic Films by Temperature Elevation. Testing Methods

ES-AENOR, Thin Film Analysis Test Method

Professional Standard - Energy, Thin Film Analysis Test Method

Professional Standard - Aerospace, Thin Film Analysis Test Method

QJ 2524-1993 Test method for stability of antistatic film for satellite

Military Standard of the People's Republic of China-General Armament Department, Thin Film Analysis Test Method

GJB 983.7-1993 Military Rubber Film Test Method Fatigue Life Determination
GJB 983.4-1993 Test methods for military rubber films - Determination of low-temperature elasticity
GJB 983.1-1990 Military Rubber Film Test Method Determination of Change in Thickness of Liquid Immersion
GJB 983.6-1993 Military Rubber Film Test Method for Determination of Metal Corrosion Effect
GJB 983.2-1990 Military Rubber Film Test Method Determination of Mass Change in Liquid Immersion

NZ-SNZ, Thin Film Analysis Test Method

AS/NZS 4266.29:2004 Reconstituted Wood-Based Panels - Methods of Test Method 29: Heat Resistance of PVC Films

SG-SPRING SG, Thin Film Analysis Test Method

SS 323-E2-2013 Methods of test for flexible plastic packaging materials.Part E2: Standard test method for determining gas permeability characteristics of plastic film and sheeting
SS 5 Pt.B1-1985 Methods Of Test For Paints, Varnishes And Related Materials Part B1 : Determination Of Film Thickness
SS 323-C5-2013 Methods of test for flexible plastic packaging materials.Part C5: Standard test method for static and kinetic coefficients of friction of plastic film and sheeting

International Electrotechnical Commission (IEC), Thin Film Analysis Test Method

IEC 60674-2:1988/COR1:1995 Specification for plastic films for electrical purposes. Part 2: Methods of test
IEC 60674-2:2016 Specification for plastic films for electrical purposes - Part 2: Methods of test
IEC 60674-2:2016/AMD1:2019 Specification for plastic films for electrical purposes - Part 2: Methods of test
IEC 60674-2:1988 Specification for plastic films for electrical purposes. Part 2: Methods of test
IEC 60674-2:2016+AMD1:2019 CSV Specification for plastic films for electrical purposes - Part 2: Methods of test
IEC TS 62804-2:2022 Photovoltaic (PV) modules - Test methods for the detection of potential-induced degradation - Part 2: Thin-film
IEC 60674-2:1988/AMD1:2001 Specification for plastic films for electrical purposes - Part 2: Methods of test; Amendment 1
IEC 60674-2:2016/COR1:2017 Specification for plastic films for electrical purposes - Part 2: Methods of test; Corrigendum 1
IEC TR 60648:1979 Method of test for coefficients of friction of plastic film and sheeting for use as electrical insulation
IEC 62047-18:2013 Semiconductor devices - Micro-electromechanical devices - Part 18: Bend testing methods of thin film materials
IEC 62047-17:2015 Semiconductor devices - Micro-electromechanical devices - Part 17: Bulge test method for measuring mechanical properties of thin films

Malaysia Standards, Thin Film Analysis Test Method

MS 1467-1999 Method of test for determination of 2% secant modulus for polyethlylene films

AASHTO - American Association of State Highway and Transportation Officials, Thin Film Analysis Test Method

T 240-2006 Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)
T 240-2008 Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)
T 240-2009 Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test)
T 240-2013 Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test)
T 179-2005 Standard Method of Test for Effect of Heat and Air on Asphalt Materials (Thin-Film Oven Test)
T 240-2000 Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test) (HM-22; PART IIB; ASTM D 2872-96)
T 240-2003 Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test) (ASTM Designation D 2872-97)
T 240-1997 Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test) (Twentieth Edition; ASTM D2872-96)

International Organization for Standardization (ISO), Thin Film Analysis Test Method

ISO/TS 25138:2010 Surface chemical analysis - Analysis of metal oxide films by glow-discharge optical-emission spectrometry
ISO 6591-2:1985 Packaging; Sacks; Description and method of measurement; Part 2 : Empty sacks made from thermoplastic flexible film

European Committee for Electrotechnical Standardization（CENELEC）, Thin Film Analysis Test Method

EN 60674-2:2017 Specification for plastic films for electrical purposes - Part 2: Methods of test
EN 62047-21:2014 Semiconductor devices - Micro-electromechanical devices - Part 21: Test method for Poisson's ratio of thin film MEMS materials
EN 62047-17:2015 Semiconductor devices - Micro-electromechanical devices - Part 17: Bulge test method for measuring mechanical properties of thin films

Professional Standard - Electron, Thin Film Analysis Test Method

SJ 20613-1996 Methods of measurement for a.c.thin film electroluminescent matrix display devices

Standard Association of Australia （SAA）, Thin Film Analysis Test Method

AS/NZS 1580.107.2:1995 Paints and related materials - Methods of test - Determination of wet film thickness from wet film mass
AS 1580.107.1:2004 Paints and related materials - Methods of test - Determination of wet film thickness from dry film mass
AS/NZS 4201.2:1994 Pliable building membranes and underlays - Methods of test - Resistance to wet delamination
AS/NZS 4201.1:1994 Pliable building membranes and underlays - Methods of test - Resistance to dry delamination
AS/NZS 1580.107.3:1997 Paints and related materials - Methods of test - Determination of wet film thickness by gauge
AS 2001.2.27:1990 Methods of test for textiles - Physical tests - Determination of abrasion resistance of textile fabrics (inflated diaphragm method)
AS/NZS 1580.108.1:1994 Paints and related materials - Methods of test - Determination of dry film thickness on metallic substrates - Non-destructive methods
AS/NZS 4201.0:1994 Pliable building membranes and underlays - Methods of test - General introduction and list of methods
AS/NZS 2341.10:1994 Methods of testing bitumen and related roadmaking products - Determination of the effect of heat and air on a moving film of bitumen (rolling thin film oven (RTFO) test)
AS/NZS 2341.10:2015
AS 2542.2.5:2014 Sensory analysis, Method 2.5: Methodology — 'A-not A' test

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Thin Film Analysis Test Method

PREN 2667-1989 Test Method for the Determination of Water Absorption of Structural Foam Film Adhesives

The American Road & Transportation Builders Association, Thin Film Analysis Test Method

AASHTO T 240-2013 Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test)
AASHTO T 240-2021 Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test)
AASHTO T 179-2005(R2009) Standard Method of Test for Effect of Heat and Air on Asphalt Materials (Thin-Film Oven Test)

Aerospace, Security and Defence Industries Association of Europe (ASD), Thin Film Analysis Test Method

ASD-STAN PREN 2667-1989 Test Method for the Determination of Water Absorption of Structural Foam Film Adhesives

RO-ASRO, Thin Film Analysis Test Method

STAS 3886-1984 TOOTH PASTE Methods of analysis and test
SR 110-7-1995 Sugar. Methods of analysis. Test of black points
STAS 6710-1988 WOOL Organoleptic examination and methods of analysis and tests
STAS SR ISO 3696:1995 Water for analytical use -Specification and test methods,
STAS SR 13359-2-1998 Glucose. Methods of anaiysis. Humidity testing

VE-FONDONORMA, Thin Film Analysis Test Method

Indonesia Standards, Thin Film Analysis Test Method

SNI 15-1320-1989 Gypsum, Chemical analysis test method
SNI 06-3605-1994 Water analysis, Test methods of mercury by mercury analyzers

SE-SIS, Thin Film Analysis Test Method

SIS 20 03 12

未注明发布机构, Thin Film Analysis Test Method

BS 2782-6-method 643A:1976(1999) Methods of testing Plastics — Part 6 : Dimensional properties — Method 643A : Shrinkage on heating of film intended for shrink wrapping applications

European Committee for Standardization (CEN), Thin Film Analysis Test Method

CEN EN 13726-2-2002 Test Methods for Primary Wound Dressings - Part 2: Moisture Vapour Transmission Rate of Permeable Film Dressings
EN 13523-17:2011 Coil coated metals - Test methods - Part 17: Adhesion of strippable films

IN-BIS, Thin Film Analysis Test Method

IS 9382-1979

CEN - European Committee for Standardization, Thin Film Analysis Test Method

EN 13523-17:2004 Coil coated metals - Test methods - Part 17: Adhesion of strippable films
PREN 13523-17-2018 Coil coated metals - Test methods - Part 17: Adhesion of strippable films

Professional Standard - Non-ferrous Metal, Thin Film Analysis Test Method

YS/T 839-2012 Test method for measurement of insulator thickness and refractive index on silicon substrates by ellipsometry

IT-UNI, Thin Film Analysis Test Method

UNI EN ISO 4120:2021 Sensory analysis - Methodology - Triangle test

RU-GOST R, Thin Film Analysis Test Method

GOST R ISO 8588-2008 Sensory analysis. Methodology. "A" "not A" test