ZH
RU
ES
Plunger rod and sleeve
Plunger rod and sleeve, Total:385 items.
In the international standard classification, Plunger rod and sleeve involves: Fasteners, Compressors and pneumatic machines, Shipbuilding and marine structures in general, Fluid power systems, Chipless working equipment, Hand-held tools, Shafts and couplings, Gears, Technical drawings, Construction materials, Linear and angular measurements, Internal combustion engines for road vehicles, External structures, Construction industry, Structures of buildings, Welding, brazing and soldering, Analytical chemistry, Cutting tools, Machine tool systems, Rubber and plastics products, Valves, Installations in buildings, Equipment for petroleum and natural gas industries, Cork and cork products, Pumps, Bottles. Pots. Jars, Packaging materials and accessories, Ground service and maintenance equipment, Powder metallurgy, Test conditions and procedures in general, Hinges, eyelets and other articulated joints, Acoustics and acoustic measurements, Semi-manufactures of timber, Machine tools, Lifting equipment, Bearings, Pipeline components and pipelines, Dentistry, Electrical wires and cables, Road engineering.
HU-MSZT, Plunger rod and sleeve
工业和信息化部, Plunger rod and sleeve
German Institute for Standardization, Plunger rod and sleeve
- DIN 908:1992 Hexagon socket screw plugs
- DIN EN 12843:2004 Precast concrete products - Masts and poles; German version EN 12843:2004
- DIN EN ISO 13918:2008 Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:2008); English version of DIN EN ISO 13918:2008-10
- DIN 9832:2011 Tools for pressing - Holder for guide bushes and guide pillars
- DIN 9832:2011-04 Tools for pressing - Holder for guide bushes and guide pillars
- DIN EN ISO 13918:2018 Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:2017)
- DIN 83209:2011-12 Handrails and footrails on masts, posts and walls of ships
- DIN ISO 5597:1988 Hydraulic fluid power; cylinders; housings for piston and rod seals in reciprocating applications; dimensions and tolerances; identical with ISO 5597:1987
- DIN ISO 3320:2001 Fluid power systems and components - Cylinder bores and piston rod diameter - Metric series (ISO 3320:1987)
- DIN ISO 7181:2001 Hydraulic power systems and components - Cylinders - Bore and rod area ratios (ISO 7181:1991)
- DIN ISO 4395:2011-05 Fluid power systems and components - Cylinder piston rod end types and dimensions (ISO 4395:2009 + Cor. 1:2010)
- DIN EN ISO 13918:2021-12 Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:2017 + Amd 1:2021); German version EN ISO 13918:2018 + A1:2021
- DIN 83209:1982 Handrails and footrails at masts, posts and walls on ships
- DIN 15422-2:1982-07 Cranes; bottom blocks; internal sleeves and spacer sleeves for type A rope pulleys with cylindrical rolling bearing and internal sleeve
- DIN 15422-2:1982 Cranes; bottom blocks; internal sleeves and spacer sleeves for type A rope pulleys with cylindrical rolling bearing and internal sleeve
- DIN EN 17360:2020 Inland navigation vessels - Stanchions and holders for tiltable and detachable railings
- DIN EN 17360:2020-05 Inland navigation vessels - Stanchions and holders for tiltable and detachable railings; German version EN 17360:2020
- DIN ISO 8020:2003 Tools for pressing - Punches with cylindrical head and straight or reduced shank (ISO 8020:2002)
- DIN EN ISO 13918/A1:2021 Welding - Studs and ceramic ferrules for arc stud welding - Amendment 1 (ISO 13918:2017/DAM 1:2021); German and English version EN ISO 13918:2018/prA1:2021
- DIN ISO 6195:2009 Fluid power systems and components - Cylinder-rod wiper-ring housings in reciprocating applications - Dimensions and tolerances (ISO 6195:2002); English version of DIN ISO 6195:2009-03
- DIN 16262:2004 PN 6 and PN 16 cocks with adjusting nut and male connection for pressure gauges
Professional Standard - Machinery, Plunger rod and sleeve
- JB/T 2236-2005 Reciprocating piston compressor connecting rod small end bushing
- JB/T 2236-1991 Reciprocating piston compressor connecting rod small end bushing
- JB/T 7299-2006 Dimensions for mounting and connection of plunger valve
- JB/T 7299-1994 The main dimensions and installation dimensions of the plunger couple
- JB/T 7299-2020 The main dimensions and installation dimensions of the plunger couple
- JB/T 12255-2015 Specification for sintered valve plate, connecting rod and piston of refrigeration compressor
- JB/T 5919-1991 Dimensions and markings of crankshaft connecting rod radial plugging hydraulic motor mounting flange and shaft extension (1)
Society of Automotive Engineers (SAE), Plunger rod and sleeve
Professional Standard-Ships, Plunger rod and sleeve
- CB/T 3565-1993 Marine Crankshaft Connecting Rod Radial Piston Hydraulic Motor
- CB/T 3539-1994 Repair technical requirements for connecting rod bushing and piston pin hole bushing of marine diesel engine
- CB/T 3683-1995 Repair Technical Requirements for Marine Crankshaft Connecting Rod Radial Piston Hydraulic Motor
- CB/T 977-1992 Basic parameters and installation and connection dimensions of marine swash plate axial piston pump
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Plunger rod and sleeve
- GB/T 14042-1993 Hydraulic fluid power.Cylinders.Rod end plain eyes.Mounting dimensions
- GB/T 13807.3-1992 Connections with waisted stud. Nuts,extension sleeves
- GB/T 13807.3-2008 Connections with waisted stud-Nuts,extension sleeves
- GB/T 13807.3-2008 Connections with waisted stud-Nuts,extension sleeves
- GB/T 2879-2005 Hydraulic fluid power-Cylinders-Housings for piston and rod seals in reciprocating applications-Dimensions and tolerances
- GB/T 10088-1988 Module and diameter of cylindrical worm
- GB/T 10088-2018 Module and diameter of cylindrical worm
- GB/T 2879-1986 Hydraulic fluid power--Cylinder rod and piston seals for reciprocating applications--Dimensions and tolerances of housings
- GB/T 2880-1981 Hydraulic fluid power--Cylinder rod and piston seals for reciprocating applications--Dimensions and tolerances of housings--Narrow section series
- GB 2880-1981 Dimension series and tolerances of narrow-section dynamic seal grooves for hydraulic cylinder pistons and piston rods
- GB/T 15242.2-1994 Hydraulic fluid power-Cylinder rod and piston seals for reciprocating applications of bearing rings-Dimensions and tolerances
- GB/T 15242.1-1994 Hydraulic fluid power-Cylinder rod and piston seals for reciprocating applications of co-axial seals-Dimensions and tolerances
- GB/T 15242.4-1994 Hydraulic fluid power-Cylinder rod and piston seals for reciprocating applications of bearing rings-Dimansions and tolerances of housings
- GB/T 15242.3-1994 Hydraulic fluid power-Cylinder rod and piston seals for reciprocating applications of Co-axial seals-Dimensions and tolerances of housings
- GB/T 6578-1986 Hydraulic fluid power--Cylinders--Reciprocating--Housings for rod wipers--Dimensions and tolerances
- GB/T 6578-2008 Hydraulic fluid power.Cylinders.Reciprocating.Housings for rod wipers.Dimensions and tolerances
- GB/T 2350-1980 Fluid power systems and components--Cylinders--Piston rod thread dimensions and types
- GB 2350-1980 Hydraulic and pneumatic systems and components - piston rod thread type and dimension series
- GB/T 43077.4-2023 Hydraulic transmission connections for plain threaded flat ports and stud ends Part 4: Hexagonal screw plugs
Korean Agency for Technology and Standards (KATS), Plunger rod and sleeve
- KS B ISO 8405:2013 Tools for moulding ― Ejector sleeves with cylindrical head ― Basic series for general purposes
- KS B ISO 7181:2006 Hydraulic fluid power-Cylinders-Bore and rod area ratios
- KS B ISO 7181:2013 Hydraulic fluid power－Cylinders－Bore and rod area ratios
- KS B 4116-2016(2021) Tools for pressing－Guide posts and guide bushes
- KS B ISO 8405:2003 Tools for moulding-Ejector sleeves with cylindrical head-Basic series for general purpose
- KS B ISO 13918:2008 Welding-Studs and ceramic ferrules for arc stud welding
- KS B ISO 13918:2013 Welding－Studs and ceramic ferrules for arc stud welding
- KS L 6521-2001(2011) Cylindrical abrasive sleeves－Designation and dimensions
- KS B ISO 5597:2002 Hydraulic fluid power-Cylinders-Housing for piston and rod seals in reciprocating applications-Dimensions and tolerances
- KS B ISO 5597:2013 Hydraulic fluid power-Cylinders-Housing for piston and rod seals in reciprocating applications-Dimensions and tolerances
- KS B ISO 10766:2003 Hydraulic fluid power-Cylinders-Housing dimensions for rectangular-section-cut bearing rings for pistons and rods
- KS B ISO 10766:2013 Hydraulic fluid power－Cylinders－Housing dimensions for rectangular-section-cut bearing rings for pistons and rods
- KS M ISO 3863:2004 Cylindrical cork stoppers－Dimensional characteristics, sampling, packaging and marking
- KS M ISO 3863-2004(2014) Cylindrical cork stoppers－Dimensional characteristics, sampling, packaging and marking
- KS B 4116-2016 Tools for pressing－Guide posts and guide bushes
- KS M ISO 9727-2:2009 Cylindrical cork stoppers－Physical tests－Part 2：Determination of mass and apparent density for agglomerated cork stoppers
- KS M ISO 9727-2:2020 Cylindrical cork stoppers — Physical tests — Part 2: Determination of mass and apparent density for agglomerated cork stoppers
- KS B ISO 3320-2006(2011) Fluid power systems and components－Cylinder bores and piston rod diameters－Metric series
- KS P ISO 13926-2:2017 Pen systems－Part 2：Plungers and discs for pen-injectors for medical use
- KS B ISO 3320:2006 Fluid power systems and components-Cylinder bores and piston rod diameters-Metric series
- KS B ISO 3320:2013 Fluid power systems and components－Cylinder bores and piston rod diameters－Metric series
- KS B 4422-2007 Test code for performance and accuracy of computerized numerically controlled ram type drilling machines for plate
- KS M ISO 4710:2020 Cork — Cylindrical stoppers for sparkling wines and gasified wines — Characteristics
- KS M ISO 4710:2004 Cork－Cylindrical stoppers for sparkling wines and gasified wines－Characteristics
- KS A ISO 11933-1-2006(2021) Components for containment enclosures－Part 1：Glove/bag ports, bungs for glove/bag ports, enclosure rings and interchangeable units
- KS A ISO 11933-1-2006(2016) Components for containment enclosures－Part 1：Glove/bag ports, bungs for glove/bag ports, enclosure rings and interchangeable units
- KS B ISO 6547-2006(2011) Hydraulic fluid power－Cylinders－Piston seal housings incorporating bearing rings－Dimensions and tolerances
- KS B ISO 6195:2006 Fluid power systems and components－Cylinder－rod wiper－ring housings in reciprocating applications－Dimensions and tolerances
国家市场监督管理总局、中国国家标准化管理委员会, Plunger rod and sleeve
- GB/T 39378-2020 Sockets for spark-plugs and glow-plugs
- GB/T 2350-2020 Fluid power systems and components—Cylinder piston rod thread types and dimensions
- GB/T 15242.3-2021 Dimensions series of rod and piston dynamic seals for hydraulic cylinders—Part 3:Dimensions and tolerances of groove for co-axial seals
- GB/T 15242.4-2021 Dimensions series of rod and piston dynamic seals for hydraulic cylinders—Part 4:Dimensions and tolerances of bearing rings groove
Professional Standard - Coal, Plunger rod and sleeve
- MT/T 576-1996 Sealing groove patterns, dimensions and tolerances with back-up rings for hydraulic support columns, jack pistons and piston rods
- MT/T 94-1996 Inner diameter of upright post of hydraulic support and lifting jack and outer diameter of piston rod
Professional Standard - Traffic, Plunger rod and sleeve
- JT/T 50-1993 Repair technical requirements for connecting rod bushing and piston pin hole bushing of marine diesel engine
CZ-CSN, Plunger rod and sleeve
British Standards Institution (BSI), Plunger rod and sleeve
- BS ISO 11168:1996 Socket wrenches for spark and glow plugs
- BS ISO 11168:1995 Socket wrenches for spark and glow plugs
- BS 1722-7:1999 Fences - Specification for wooden post and rail fences
- NA to BS EN 1993-3-1-2006 UK National Annex to Eurocode 3. Design of steel structures - Towers, masts and chimneys - Towers and masts
- BS EN ISO 13918:2018+A1:2021 Welding. Studs and ceramic ferrules for arc stud welding
- BS 7564-3:1992 Tools for moulding - Mould guide pillars, straight and shouldered, and locating guide pillars, shouldered
- BS ISO 9727-2:2007 Cylindrical cork stoppers - Physical tests - Determination of mass and apparent density for agglomerated cork stoppers
- BS 7568-28:1993 Press tools - Guide pillars - Type C, pillars with taper lead and bush
- BS ISO 5597:2010 Hydraulic fluid power - Cylinders - Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications
- BS ISO 4395:2009 Fluid power systems and components - Cylinder piston rod end types and dimensions
- 21/30428219 DC BS EN ISO 13918 AMD1. Welding. Studs and ceramic ferrules for arc stud welding
- BS ISO 9182-4:2023 Tools for pressing. Guide pillars - Type C, pillars with taper lead and bush
- 18/30374657 DC BS ENISO 13918:2017 AMD 1. Welding. Studs and ceramic ferrules for arc stud welding
- BS ISO 9182-4:2020 Tools for pressing — Guide pillars Part 4 : Type C, pillars with taper lead and bush
- BS EN 17360:2020 Inland navigation vessels. Stanchions and holders for tiltable and detachable railings
- BS ISO 3320:2013 Fluid power systems and components. Cylinder bores and piston rod diameters and area ratios. Metric series
- BS ISO 7578:2009 Road vehicles. Sheath-type glow-plugs. General requirements and test methods
- BS ISO 7578:2008 Road vehicles - Sheath-type glow-plugs - General requirements and test methods
- BS 6579-1:1988 Safety fences and barriers for highways - Specification for components for tensioned corrugated beam safety fence on Z posts
- 19/30377422 DC BS EN 17360. Inland navigation vessels. Stanchions and holders for tiltable and detachable railings
International Organization for Standardization (ISO), Plunger rod and sleeve
- ISO 11168:1995 Socket wrenches for spark- and glow-plugs
- ISO 7181:1991 Hydraulic fluid power; cylinders; bore and rod area ratios
- ISO 8405:1986 Ejector sleeves with cylindrical head; Basic series for general purposes
- ISO 13918:2008 Welding - Studs and ceramic ferrules for arc stud welding
- ISO 13918:2017 Welding - Studs and ceramic ferrules for arc stud welding
- ISO 5597:1987 Hydraulic fluid power; Cylinders; Housings for piston and rod seals in reciprocating applications; Dimensions and tolerances
- ISO 3670:1979 Blanks for plug gauges and handles (taper lock and trilock) and ring gauges; Design and general dimensions
- ISO/FDIS 9182-4 Tools for pressing — Guide pillars — Part 4: Type C, pillars with taper lead and bush
- ISO 9182-4:2023 Tools for pressing — Guide pillars — Part 4: Type C, pillars with taper lead and bush
- ISO 10766:2006 Hydraulic fluid power - Cylinders - Housing dimensions for rectangular-section-cut bearing rings for pistons and rods
- ISO 10766:1996 Hydraulic fluid power - Cylinders - Housing dimensions for rectangular-section-cut bearing rings for pistons and rods
- ISO 10766:2014 Hydraulic fluid power - Cylinders - Housing dimensions for rectangular-section-cut bearing rings for pistons and rods
- ISO 3863:1989 Cylindrical cork stoppers; dimensional characteristics, sampling, packaging and marking
- ISO 7181:1982 Hydraulic fluid power; Cylinders; Bore and rod area ratios
- ISO 13918:2017/Amd 1:2021 Welding — Studs and ceramic ferrules for arc stud welding — Amendment 1
- ISO 4395:2009 Fluid power systems and components - Cylinder piston rod end types and dimensions
- ISO 9727-2:2007 Cylindrical cork stoppers - Physical tests - Part 2: Determination of mass and apparent density for agglomerated cork stoppers
- ISO 4395:1978 Fluid power systems and components; Cylinders; Piston rod thread dimensions and types
- ISO 5597:2010 Hydraulic fluid power - Cylinders - Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications
- ISO 5597:2018 Hydraulic fluid power - Cylinders - Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications
- ISO 3320:1975 Fluid power systems and components — Cylinder bores and piston rod diameters — Metric series
- ISO 3321:1975 Fluid power systems and components; Cylinder bores and piston rod diameters; Inch series
- ISO 3320:1987 Fluid power systems and components; Cylinder bores and piston rod diameters; Metric series
- ISO 5597-1:1980 Hydraulic fluid power — Cylinder rod and piston seals for reciprocating applications — Dimensions and tolerances of housings — Part 1: Normal series
- ISO 8020:2002 Tools for pressing - Punches with cylindrical head and straight or reduced shank
- ISO 7578:1982 Road vehicles — Glow plugs, sheath type — General requirements and test methods
- ISO 4395:2009/Cor 1:2010 Fluid power systems and components - Cylinder piston rod end types and dimensions
- ISO 3320:2013 Fluid power systems and components.Cylinder bores and piston rod diameters and area ratios.Metric series
- ISO 6195:2002 Fluid power systems and components - Cylinder-rod wiper-ring housings in reciprocating applications - Dimensions and tolerances
- ISO 7578:2008 Road vehicles — Sheath-type glowplugs
— General requirements and test
methods
- ISO 6550:1980 Road vehicles — Glow plugs M 12x1,25 and M 14x1,25 sheath type and cylinder head housing dimensions
IT-UNI, Plunger rod and sleeve
Japanese Industrial Standards Committee (JISC), Plunger rod and sleeve
- JIS B 8396:2000 Hydraulic fluid power -- Cylinders -- Housings for piston and rod seals in reciprocating applications -- Dimensions and tolerances
- JIS B 8395:2000 Fluid power systems and components -- Cylinders -- Housings for rod wiper rings in reciprocating applications -- Dimensions and tolerances
- JIS B 8395:2010 Fluid power systems and components -- Cylinder-rod wiper-ring housings in reciprocating applications -- Dimensions and tolerances
- JIS B 8395:2017 Fluid power systems and components -- Cylinder-rod wiper-ring housings in reciprocating applications -- Dimensions and tolerances
- JIS K 6931:1991 Reclaimed plastics bars, rods, plates and piles
- JIS B 8663:2010 Hydraulic fluid power -- Cylinders -- Housing dimensions for rectangular-section-cut bearing rings for pistons and rods
- JIS R 6257:1999 Cylindrical abrasive sleeves -- Designation and dimensions
- JIS K 6931 AMD 1:2006 Reclaimed plastics bars, rods, plates and piles (Amendment 1)
- JIS B 8663:2001 Hydraulic fluid power -- Cylinders -- Housing dimensions for rectangular-section-cut bearing rings for pistons and rods
AT-ON, Plunger rod and sleeve
- ONORM ISO 7181:1992 Hydraulic fluid power - Cylinders -Area ratios between bores and rods
- 0NORM M 6760-3-1996 Drawing data for toothings - Cylindrical worms and wormgears
- ONORM ISO 5597:1988 Hydraulic fluid power; cylinders; housings for piston and rod seals in reciprocating applications; dimensions and tolerances
- ONORM M 6751-1986 Cylindrical worms; dimensions, coordination of centre distances and gear ratios of worm drives
- OENORM EN ISO 13918/A1:2021 Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:2017/DAM 1:2021) (Amendment)
- ONORM ISO 4395:1989 Fluid power Systems and components; cy linders; piston rod thread dimensions and types
- ONORM M 6750-1987 Cylindrical worm gear pairs with shaft angle 90°; definitions, determining dimensions, deviations and tolerances
- ONORM ISO 3320:1988 Fluid power Systems and components; cy linder bor es and piston rod diameters; metric series
RO-ASRO, Plunger rod and sleeve
- STAS 3254-1977 Petroleum equipment PISTONS AND PISTON ROD HEADS FOR MUD PUMPS
- STAS 12272/1-1985 Seals in machine buildings HOUSINGS FOR CYLINDER ROD AND PISTON SEALS Dimensions
- STAS 1040-1985 Coniferous round timber for buildings POSTS AND POLES
- STAS 834-1984 Petroleum equipment THREADED TAPER GAUGES FOR INSPECTIONS OF DRILL-PIPES AND DRILL-PIPE SLEEVES
- SR ISO 4395:1993 Fluid power systems and components. Cylinders. Piston rod thread dimensions and thpes
- STAS 4633-1980 Casting technology CENTERING HOLES, BUSHES AND BARS FOR MOULDING BOXES
- STAS 525-1987 Fittings for central heating instalations BUSHINGS, NIPPLES, PLUGS
- STAS SR ISO 3321:1995 Fluid power systems and components - Cylinder bores and piston rod diameters - Inch series
- STAS 10652/1-1976 HYDRAULIC DRIVES CYLINDERS, LIGHT SERIES (XP 63 bar) WITH SINGLE PISTON ROD Types and main dimensions
- STAS 10652/2-1976 HYDRAULIC DRIVES CYLINDERS, LIGHT SERIES (NP 63 bar) WITH DOUBLE-ENDED PISTON ROD Types and main dimensions
- STAS 5525-1975 Equipment for geological inves- tigation WATER AND SLUSH PUMP PISTON RODS FOR PROSPEC- TING RIGS
- STAS 8889-1986 Non adjustable gauges and master gauges for metric internal cylindrical threads PLUG GAUGES AND MASTER GAUGES WITH DIAMETER OVER 120 mm VP TO 300 mm Dimensions
RU-GOST R, Plunger rod and sleeve
- GOST 19036-1994 Cylindrical worm gear pairs. Basic worm and basic generating worm
- GOST 19036-1981 Cylindrical worm gear pairs. Basic worm and basic generating worm
- GOST 19672-1974 Cylindrical worm gear pairs. Modules and coefficients of worm diameter
- GOST 14811-1969 Plain double-plug gauges with no-go inserts of not full-from with diameter from 6 to 50 mm. Design and dimensions
- GOST 25020-1984 Hydraulic and pneumatic cylinders. Piston rod and plunger threads
- GOST 24811-1981 Rubber wipers for rods. Types, basic parameters and dimensions
- GOST 14748-1969 Cylindrical and hexahedral handles for plug-gauges. Design and dimensions
- GOST 27407-1987 Piston opposite compressors. Acceptable levels and methods of determination of noise characteristics
- GOST 25553-1982 One stage hydraulic cylinders at nominal pressure 16 MPa. Connected threades of rods and plungers
- GOST 5377-1979 Cylindrical roller bearings with short rollers without inner or outer ring. Types and basic dimensions
- GOST ISO 9727-2-2016 Cylindrical cork stoppers. Methods for determination of physical properties. Part 2. Determination of mass and apparent density for agglomerated cork stoppers
- GOST R ISO 9727-2-2012 Cylindrical cork stoppers. Methods for determination of physical properties. Part 2. Determination of mass and apparent density for agglomerated cork stoppers
- GOST R ISO 4710-2002 Cylindrical cork stoppers for sparkling wines and gasified wines. General technical requirements
- GOST 28485-1990 Adjustable mandrels with external Morze taper and straight shank for drill chucks. Dimensions
- GOST R 51312-1999 Polyethylene insulated and plastic sheathed block-signalling cables. Specifications
- GOST 26540-1985 Straight shanrs for adjustable bushes and arbouas and locking nuts main characteristics
- GOST ISO 4710-2015 Cylindrical cork stoppers for sparkling wines and gasified wines. General technical requirements
FI-SFS, Plunger rod and sleeve
SE-SIS, Plunger rod and sleeve
- SIS SS 3139-1983 Blanks for taper lock plain cylindrical plug gauging member - Nominal diameter 1 to 18 mm
- SIS SS-ISO 5597:1990 Hydraulic fluid power — Cylinders — Housings for piston and rod seals in reciprocating applications — Dimensions and tolerances
- SIS SS-ISO 6195:1991 Fluid power systems and components — Cylinders — Housings for rod wiper rings in reciprocating applications — Dimensions and tolerances
- SIS SS-ISO 4395:1985 Fluid power systems and components - Cylinders - Piston rod thread dimen- sions and types
- SIS SS-ISO 3320:1990 Fluid power systems and components — Cylinder bores and piston rod diameters — Metric series
- SIS SMS-427-1933
- SIS SS 78 09 50-1980 Shipbuilding — Rudders — Tapered rudder stocks, for shrunk-on liner — Type 1 and 2
Association Francaise de Normalisation, Plunger rod and sleeve
- NF E74-326*NF ISO 11168:1995 Socket wrenches for spark- and glow-plugs.
- NF E74-367:2009 Assembly tools for screws and nuts - Square drive adaptor with hexagon or cylindrical flat drive, for power socket wrenches.
- NF E74-367*NF ISO 3317:2015 Assembly tools for screws and nuts - Square drive adaptor with hexagon or cylindrical flat drive, for power socket wrenches
- NF E63-121:1994 Tool for pressing. Ball cage guiding pillars. End-locking pillars and pillars with taper lead and bush.
- NF A87-021*NF EN ISO 13918:2018 Welding - Studs and ceramic ferrules for arc stud welding
- NF E48-037:1988 Hydraulic fluid power. Cylinders. Rectangular bearing ring housing for rods and pistons. Dimensions.
- NF EN 12843:2005 Produits préfabriqués en béton - Mâts et poteaux
- NF E22-151:1967 CYLINDRICAL STRAIGHT-SIDED SERRATIONS.
- NF E48-040:1993 Hydraulic fluid power. Cylinders. Seal housings for rods and pistons. Dimensions.
- NF R15-703-2:1996 Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing. Part 2 : M12 X 1,25 glow-plugs.
- NF R15-703-1:1996 Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing. Part 1 : M14 X 1,25 glow-plugs.
- NF E63-121:2006 Tool for pressing - Ball cage guiding pillars - End-locking pillars and pillars with taper lead and bush.
- NF EN ISO 13918:2018 Soudage - Goujons et bagues céramiques pour le soudage à l'arc des goujons
- NF A87-021/A1*NF EN ISO 13918/A1:2021 Welding - Studs and ceramic ferrules for arc stud welding - Amendment 1
- NF E48-060:1992 Fluid power. Cylinders. Piston rod thread dimensions and types.
- NF E49-049:1992 Pneumatic fluid power. Cylinders. Bores and piston rod diameters.
- NF ISO 10766:2014 Transmissions hydrauliques - Vérins - Dimensions de logements de dispositifs de guidage à section rectangulaire pour pistons et tiges de piston
- NF E48-001:1995 Hydraulic fuid power. 160 bar single and double-rod cylinders, bore 32 to 160 mm. French former series. Designation and interchangeability dimensions.
- NF E48-052:1992 Hydraulic fluid power. Cylinders. Bore and rod area ratios.
- NF E48-060*NF ISO 4395:2009 Fluid power systems and components - Cylinder piston rod end types and dimensions
- NF ISO 4395:2009 Transmissions hydrauliques et pneumatiques - Dimensions et types des extrémités des tiges de piston pour vérins
- NF ISO 5597:2018 Transmissions hydrauliques - Vérins - Dimensions et tolérances des logements de joints d'étanchéité pour pistons et tiges de piston à simple effet dans les applications à mouvement alternatif
- NF EN ISO 888:2018 Fixations - Vis, goujons et tiges filetées - Longueurs nominales et longueurs filetées
- NF E48-010:1984 Hydraulic fluid power. Cylinder. Fork yoke and tenon for extremity of piston rod.
- NF EN 17360:2020 Bateaux de navigation intérieure - Chandeliers et support pour garde-corps rabattables et démontables
- NF M81-611:1954 MINING EQUIPMENT. SHAKER CONVEYORS. RODS AND FLANGES FOR PISTON AIR-ENGINES.
- NF M82-239:1955 MINING EQUIPMENT. COMPRESSED AIR PIPES. GAS-THREAD CYLINDRICAL PLUGS.
- NF E48-040:2010 Hydraulic fluid power - Cylinders - Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications.
- NF ISO 4203:2005 Outils à queue cylindrique - Tenons d'entraînement et douilles extensibles - Dimensions
- NF J71-300*NF EN 17360:2020 Inland navigation vessels - Stanchions and holders for tiltable and detachable railings
- NF E63-519:2008 Material of moulding and extrusion - Metal mould components - Support pillar bushes
- NF E63-519:1992 Material of moulding and extrusion. Metal mould components. Support pillar bush.
- NF J68-135:1947 Shipbuilding. Engine and boiler rooms. Floors and ladders. Railing sockets.
- NF ISO 238:2017 Douilles de réduction et allonges pour outils au cône Morse
- NF E29-600:1987 Industrial pipework. Steel fittings and plugs. Socket welding fittings.
- NF M81-612:1954 MINING EQUIPMENT. SHAKER CONVEYORS. DRIVE SHAFT. SPINDLE FOR PISTON AIR-ENGINES.
- NF E48-019*NF ISO 3320:2014 Fluid power systems and components - Cylinder bores and piston rod diameters and area ratios - Metric series
- NF ISO 3320:2014 Transmissions et composants hydrauliques et pneumatiques - Alésages des vérins et diamètres des tiges de piston et rapports de surfaces - Série métrique
- NF R15-704:1987 ROAD VEHICLES. SHEATH-TYPE GLOW-PLUGS. GENERAL REQUIREMENTS AND TEST METHODS.
- NF L36-226*NF EN 4198:2006 Aerospace series - Rod-ends, adjustable self-aligning plain bearing with self-lubricating liner and threaded shank in corrosion resisting steel - Dimensions and loads
VN-TCVN, Plunger rod and sleeve
- TCVN 2846-1979 Cylindrical worm gear pairs.Banr wors and basic generasing worms
- TCVN 2845-1979 Cylindrical worm gear pairs.Modules and coefficients of worm diameter
Defense Logistics Agency, Plunger rod and sleeve
- DLA MIL-PRF-8805/70 L-2012 SWITCHES, SENSITIVE, DPDT AND 4PDT, PLUNGER OR ROLLER, 4 AMPERES, HERMETICALLY SEALED CONTACTS, RESILIENT SEALED PLUNGER
- DLA A-A-59440 B-2006 COCKS, DRAIN, COCKS, PLUG, AND COCKS, SHUTOFF, SCREW STEM, BRASS, NPTF-1 THREADS, GENERAL REQUIREMENTS FOR
- DLA MIL-PRF-8805/100 G-2012 SWITCHES, SENSITIVE, PLUNGER, 10 AMPERES 2PDT AND 7 AMPERES 4PDT, RESILIENT SEAL
European Committee for Standardization (CEN), Plunger rod and sleeve
- EN 12843:2004 Precast concrete products - Masts and poles
- EN ISO 13918:1998 Welding - Studs and Ceramic Ferrules for Arc Stud Welding ISO 13918:1998
- EN ISO 13918:2018 Welding - Studs and ceramic ferrules for arc stud welding
- EN ISO 13918:2008 Welding - Studs and ceramic ferrules for arc stud welding
- EN ISO 13918:2018/A1:2021 Welding - Studs and ceramic ferrules for arc stud welding - Amendment 1 (ISO 13918:2017/Amd 1:2021)
- EN ISO 3630-3:2015 Dentistry - Endodontic instruments - Part 3: Compactors: pluggers and spreaders (ISO 3630-3:2015)
- EN ISO/TR 10400:2011 Petroleum and natural gas industries - Equations and calculations for the properties of casing, tubing, drill pipe and line pipe used as casing or tubing
Professional Standard - Petroleum, Plunger rod and sleeve
- SY/T 5903-1993 Sucker rod string group and design method
- SY/T 6417-2016 Performance properties of casing, tubing and drill pipe
- SY/T 6417-1999 Performance properties of casing,tubing and drill pipe
- SY/T 6417-2009 Performance properties of casing,tubing and drill pipe
- SY 6417-2016 Casing, tubing and drill pipe performance
- SY/T 5525-2009 The upper and lower kelly cock of the rotary equipment on drilling industry
- SY/T 5525-1992 Rotary Drilling Equipment Upper and Lower Kelly Plug Valves
- SY/T 6474-2000 Field inspectiong of new casing,tubing,and plani end drill pipe
ES-AENOR, Plunger rod and sleeve
American National Standards Institute （ANSI), Plunger rod and sleeve
- ANSI B93.3-1984 Cylinder Bore and Piston Rod Diameters - Inch Series
- ANSI B93.76-1988 Hydraulic Fluid Power - Cylinders - Housings for Piston and Rod Seals in Reciprocating Applications - Dimensions and Tolerances
Standard Association of Australia （SAA）, Plunger rod and sleeve
Danish Standards Foundation, Plunger rod and sleeve
- DS/EN ISO 13918:2008 Welding - Studs and ceramic ferrules for arc stud welding
- DS/ISO 5597:1989 Hydraulic fluid power. Cylinders. Housings for piston and rod seals in reciprocating applications. Dimensions and tolerances
- DS/ISO 7181:1989 Hydraulic fluid power. Cylinders. Bore and rod area ratios
- DS/ISO 4395:1989 Fluid power systems and components. Cylinders. Piston rod thread dimensions and types
- DS/ISO 3320:1989 Fluid power systems and components. Cylinder bores and piston rod diameters. Metric series
- DS/EN ISO 13918:2021 Welding – Studs and ceramic ferrules for arc stud welding – Amendment 1 (ISO 13918:2017/Amd 1:2021)
- DS/ISO 7425-1:1992 Hydraulic fluid power.Housings for elastomer.energized plastic-faced seals.Dimensions and tolerances.Part 1; Piston seal housings
KR-KS, Plunger rod and sleeve
- KS B ISO 13918-2008 Welding－Studs and ceramic ferrules for arc stud welding
- KS M ISO 9727-2-2020 Cylindrical cork stoppers — Physical tests — Part 2: Determination of mass and apparent density for agglomerated cork stoppers
- KS P ISO 13926-2-2017 Pen systems－Part 2：Plungers and discs for pen-injectors for medical use
- KS M ISO 4710-2020 Cork — Cylindrical stoppers for sparkling wines and gasified wines — Characteristics
- KS R ISO 7578-2013 Road vehicles－Sheath-type glow-plugs－General requirements and test methods
American Society for Testing and Materials (ASTM), Plunger rod and sleeve
- ASTM E1154-23 Standard Specification for Piston or Plunger Operated Volumetric Apparatus and Operator Qualification
- ASTM A307-21 Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength
- ASTM A307-14e1 Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength
- ASTM A307-12 Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength
- ASTM A307-14 Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60000 PSI Tensile Strength
GOSTR, Plunger rod and sleeve
- GOST 34565-2019 Trunk pipeline transport of oil and oil products. Piston and plunger pumps. General specifications
Professional Standard - Light Industry, Plunger rod and sleeve
- QB/T 1673-1992 Hygienic requirements for mechanical homogenizers and plunger pumps for dairy products
轻工业部, Plunger rod and sleeve
- QB 1673-1992 Hygiene requirements for dairy mechanical homogenizers and plunger pumps
YU-JUS, Plunger rod and sleeve
- JUS C.J1.492-1987 Cast iron drainage pipes and fittings vvithout socket. Pipe end pfugs, socket plugs, supports ofdrain pi-pes and connectors. Shapes and dimensions
- JUS C.J1.484-1987 ?ast iron wast and soil pipes and fittings with socket. Socket plugs. Shapes and dimensions
- JUS B.M2.150-1981 Support of mine opening. Slot—and— vvedge bolt. Shape and dimensions
U.S. Military Regulations and Norms, Plunger rod and sleeve
AGMA - American Gear Manufacturers Association, Plunger rod and sleeve
- 234.01-1966 INSPECTION OF COARSE-PITCH CYLINDRICAL WORMS AND WORMGEARS
- 6034-B92-1992 Practice for Enclosed Cylindrical Wormgear Speed Reducers and Gearmotors
ES-UNE, Plunger rod and sleeve
- UNE-EN ISO 13918:2018 Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:2017, Corrected version 2018-05)
- UNE-EN ISO 13918:2018/A1:2022 Welding - Studs and ceramic ferrules for arc stud welding - Amendment 1 (ISO 13918:2017/Amd 1:2021)
- UNE-EN 17360:2020 Inland navigation vessels - Stanchions and holders for tiltable and detachable railings
American Society of Mechanical Engineers (ASME), Plunger rod and sleeve
- ASME B94.44-1972 Punches - Basic, cylindrical head type and related quill bushings
- ASME B107.9M-1994 Wrenches, box, angled, open end, combination, flare nut and tappet (Metric series)
- ASME A17 Checklist 3-1991 Checklist for inspection and test of hydraulic elevators (for direct plunger without safeties or counterweights)
API - American Petroleum Institute, Plunger rod and sleeve
- API BULL 5C2-1987 Bulletin on Performance Properties of Casing@ Tubing@ and Drill Pipe
- API STD 5A-1956 Specification for casing@ tubing@ and drill pipe (TWENTIETH EDITION)
- API STD 5A-1944 SPECIFICATION FOR CASING@ TUBING@ AND DRILL PIPE (Thirteenth Edition)
- API STD 5A-1945 SPECIFICATION FOR CASING@ DRILL PIPE AND TUBING (Fourteenth Edition)
- API STD 5A-1949 SPECIFICATION FOR CASING@ DRILL PIPE AND TUBING (Fifteenth Edition)
- API STD 5A-1957 Specification for casing@ tubing@ and drill pipe (TWENTY-FIRST EDITION)
- API STD 5A-1953 Specification for casing@ tubing@ and drill pipe (Eighteenth Edition)
- API STD 5A-1952 Specification for casing@ tubing@ and drill pipe (Seventeenth Edition)
- API STD 5A-1961 Specification for casing@ tubing@ and drill pipe (TWENTY-FOURTH EDITION)
- API STD 5A-1960 SPECIFICATION FOR CASING@ TUBING@ AND DRILL PIPE (TWENTY-THIRD EDITION)
- API STD 5A-1958 SPECIFICATION FOR CASING@TUBING AND DRILL PIPE (Twenty-second Edition)
- API STD 5A-1962 Specification for casing@ tubing@ and drill pipe (Twenty-fifth Edition)
- API BULL 5C2 SUPP 1-1981 Performance Properties of Casing@ Tubing@ and Drill Pipe (SEVENTEENTH EDITION)
- API STD 5A-1965 SPECIFICATION FOR CASING@ TUBING AND DRILL PIPE (Twenty-seventh Edition)
- API BULL 5C2-1980 Performance Properties of Casing@ Tubing@ and Drill Pipe (SEVENTEENTH EDITION)
- API SPEC 5A-1981 SPECIFICATION FOR CASING@ TUBING@ AND DRILL PIPE (Thirty-Fifth Edition)
- API STD 5A-1940 PIPE SPECIFICATION CASING@ DRILL PIPE AND TUBING (Tenth Edition)
- API BULL 5C2-1999 Bulletin on Performance Properties of Casing@ Tubing@ and Drill Pipe (Twenty-First Edition)
- API BULL 5C2-1974 Bulletin on Performance Properties of Casing@ Tubing@ and Drill Pipe (Fifteenth Edition)
- API BULL 5C2-1972 Bulletin on Performance Properties of Casing@ Tubing@ and Drill Pipe (Fourteenth Edition)
- API SPEC 5AX-1981 SPECIFICATION for HIGH-STRENGTH CASING@ TUBING & DRILL PIPE (Eleventh Edition)
- API SPEC 5AX-1984 SPECIFICATION for HIGH-STRENGTH CASING@ TUBING@ AND DRILL PIPE (Thirteenth Edition)
- API SPEC 11B CHINESE-2010 Specification for Sucker Rods@ Polished Rods and Liners@ Couplings@ Sinker Bars@ Polished Rod Clamps@ Stuffing Boxes@ and Pumping Tees (Twenty-Seventh Edition; Effective Date: November 1@ 2010)
- API BULL 5C3-1994 Bulletin on Formulas and Calculations for Casing@ Tubing@ Drill Pipe and Line Pipe Properties
- API RP 5C1-1971 RECOMMENDED PRACTICE FOR CARE AND USE OF CASING@ TUBING@ AND DRILL PIPE (NINTH EDITION)
- API RP 5C1-1957 RECOMMENDED PRACTICE FOR CARE AND USE OF CASING@ TUBING@ AND DRILL PIPE (Sixth Edition)
- API RP 5A5-1993 Recommended Practice for Field Inspection of New Casing@ Tubing@ and Plain-End Drill Pipe
- API RP 5A5-1986 RECOMMENDED PRACTICE FOR FIELD INSPECTION OF NEW CASING@ TUBING@ AND PLAIN-END DRILL PIPE
SAE - SAE International, Plunger rod and sleeve
- SAE AS4491-1991 Plastic Disposable Cartridge@ Plunger@ Nozzles and Cartridge Assembly
- SAE AS4491A-2012 Plastic Disposable Cartridge@ Plunger@ Nozzles and Cartridge Assembly
- SAE AS778A-1969 Spark Plug Terminals and Sleeves (Reaffirmed Noncurrent June 1994)
IN-BIS, Plunger rod and sleeve
Lithuanian Standards Office , Plunger rod and sleeve
AENOR, Plunger rod and sleeve
- UNE-EN ISO 13918:2009 Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:2008)
- UNE 101365:1986 FLUID POWER SYSTEMS AND COMPONENTS. CYLINDERS. PISTON ROD THREAD DIMENSIONS AND TYPES
- UNE 16533-1:2006 Assembly tools for screws and nuts. Part 1: Socket wrenches for spark and glow-plugs. Technical specifications and tests
BE-NBN, Plunger rod and sleeve
PL-PKN, Plunger rod and sleeve
- PN M73215-1986 Hydraulic fluid power Cylinders — Housings for piston and rod seals Dimensions
- PN M73229-1988 Hydraulic fluid power Single rod cylinders, 160 bar (16 MPa) medium and 250 bar (25 MPa) senes Mounting dimenstons for accessories
- PN M73228-1987 Hydraulic fluid power Single rod cylinders, 16 MPa medium and 25 MPa series Tolerances
Professional Standard - Aviation, Plunger rod and sleeve
NO-SN, Plunger rod and sleeve
- NS 5903-1981 Fluid power systems and components - Cylinders - Piston rod thread dimensions
未注明发布机构, Plunger rod and sleeve
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Plunger rod and sleeve
- GB/T 15242.2-2017 Dimensions series of rod and piston dynamic seals for hydraulic cylinders—Part 2：Dimensions and tolerances of bearing rings
- GB/T 15242.1-2017 Dimensions series of rod and piston dynamic seals for hydraulic cylinders—Part 1：Dimensions and tolerances of co-axial seals for reciprocating applications
AIA/NAS - Aerospace Industries Association of America Inc., Plunger rod and sleeve
- NASM24149-2000 Studs@ Welding@ and ARC Shields (Ferrules)@ General Specification for
- NASM24149-2001 Studs@ Welding@ and ARC Shields (Ferrules)@ General Specification for (Rev 1)
ZA-SANS, Plunger rod and sleeve
- SANS 457-2:2000 Wooden poles, droppers, guardrail posts and spacer blocks Part 2: Softwood species
- SANS 457-3:2000 Wooden poles, droppers, guardrail posts and spacer blocks Part 3: Hardwood species
- SANS 457-2:2008 Wooden poles, droppers, guardrail posts and spacer blocks Part 2: Softwood species
Professional Standard - Automobile, Plunger rod and sleeve
- QC/T 685-2002 General specifications for plunger oil pumps for motorcycles and mopeds
CEN - European Committee for Standardization, Plunger rod and sleeve
- PREN 17360-2019 Inland navigation vessels - Stanchions and holders for tiltable and detachable railings
Canadian Standards Association (CSA), Plunger rod and sleeve
- CSA O15-05-2005 Wood Utility Poles and Reinforcing Stubs Third Edition; Update No. 1: 09/2006
Association of German Mechanical Engineers, Plunger rod and sleeve
- VDI/VDE/DGQ 2618 Blatt 4.1-2006 Inspection of measuring and test equipment - Testing instruction for cylindrical setting gauges, plug gauges and ring gauges
Professional Standard - Military and Civilian Products, Plunger rod and sleeve
- WJ 601-1988 Ordinary thread gauge structure type and size sleeve plug gauge handle
- WJ 1164-1988 Ordinary thread gauge type and size Sleeve-type ordinary thread plug gauge
PT-IPQ, Plunger rod and sleeve
- NP 2802-1988 Cork Cylindrical stoppers. Dimensional characteristics. Sampling, packing and labelling
CH-SNV, Plunger rod and sleeve
American Gear Manufacturers Association, Plunger rod and sleeve
- AGMA 2011-A98-1998 Cylindrical Wormgearing Tolerance and Inspection Methods Replacement of AGMA 390.03a