ZH
RU
ES
Deuterium lamp power
Deuterium lamp power, Total:56 items.
In the international standard classification, Deuterium lamp power involves: Lamps and related equipment, Fishing and fish breeding, Electronic tubes, Electrical accessories, Aerospace electric equipment and systems, Electricity. Magnetism. Electrical and magnetic measurements, Equipment for entertainment.
Fujian Provincial Standard of the People's Republic of China, Deuterium lamp power
Group Standards of the People's Republic of China, Deuterium lamp power
Zhejiang Provincial Standard of the People's Republic of China, Deuterium lamp power
- DB33/T 2138-2018 Requirements for the maximum total power of light purse seine fishing lights
RO-ASRO, Deuterium lamp power
- STAS 9183-1985 SIGNALLING ELECTRIC INCANDESCENT LAMPS Rated voltages and powers
- STAS 3009-1990 Common electric incandescent lamps. Nominal voltages and powers
- STAS 10876/3-1984 Aircraft electrical filament lamps MIX1ATURE LAMPS FOR POWERS UP TO 5 W INCLUDING Special technical requirements for qualily
- STAS 10876/4-1984 Aircraft electrical filament lamps. MINIATURE LAMPS FOR POWERS OVER 5 W. Special technical requirements for quality.
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Deuterium lamp power
- GB/T 23142-2008 Preset power controller for high pressure sodium lamps.Performance requirements
- GB/T 3307-1982 Method of heater intermittent test of low-power electronic tubes
- GB 3307-1982 Small power electronic tube filament intermittent test method
- GB/T 32483.1-2016 Energy performance of lamp controlgear.Part 1:Controlgear for fluorescent lamps.Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear
HU-MSZT, Deuterium lamp power
Professional Standard - Light Industry, Deuterium lamp power
- QB/T 2941-2008 Preset-power reactor ballasts for high pressure sodium lamps
- QB/T 4352-2012 Current-limiting reactor for high pressure sodium lamps preset-power
CH-SNV, Deuterium lamp power
未注明发布机构, Deuterium lamp power
RU-GOST R, Deuterium lamp power
- GOST 19438.14-1975 Method of measurement of output power and non-linear distertiens of electronic tubes and valves under test in the conditions of low-frequeneq amplification
- GOST 19438.18-1978 Low-power electronic tubes. Test methods for multiple switching on and swit ching off the heating voltage
- GOST 21106.1-1975 Oscillator, modulator and regulation tubes; anode dissipated power more than 25 W. Test method for multiple switching on and switching off the heating voltage
- GOST 21106.5-1977 Oscillator, modulator and regulation tubes; anode dissipated power more than 25 W. Methods of measurement of filament current and voltage
- GOST 8090-1973 Receiving and transmitting tubes and valves with long anode dissipation up to 25 W. Method of measurement of filament or heater voltage and current
BE-NBN, Deuterium lamp power
U.S. Military Regulations and Norms, Deuterium lamp power
- ARMY MIL-C-13940 (1)-1955 CABLE ASSEMBLIES, POWER, ELECTRICAL, AND EXTENSION LIGHTS, CONNECTORS, ADAPTERS, AND DUMMIES
- ARMY MIL-C-13940 SUPP 1-1955 CABLE ASSEMBLIES, POWER, ELECTRICAL, AND EXTENSION LIGHTS, CONNECTORS, ADAPTERS, AND DUMMIES
- ARMY MIL-C-13940-1955 CABLE ASSEMBLIES, POWER, ELECTRICAL, AND EXTENSION LIGHTS, CONNECTORS, ADAPTERS, AND DUMMIES
Society of Automotive Engineers (SAE), Deuterium lamp power
- SAE ARP5297A-2011 Recommended Qualification Tests for Halogen Miniature Lamps Less than 35 Watts for Aircraft Applications
British Standards Institution (BSI), Deuterium lamp power
- BS EN 62442-1:2011 Energy performance of lamp controlgear. Controlgear for fluorescent lamps. Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear
- BS EN 62442-1:2012 Energy performance of lamp controlgear. Controlgear for fluorescent lamps. Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear
- BS EN IEC 62442-1:2018 Tracked Changes. Energy performance of lamp controlgear. Controlgear for fluorescent lamps. Method of measurement to determine the total input power of controlgear circuits and the efficiency of controlgear
- BS EN IEC 62442-1:2022 Tracked Changes. Energy performance of lamp controlgear. Controlgear for fluorescent lamps. Method of measurement to determine the total input power of controlgear circuits and the efficiency of controlgear
- 20/30427819 DC BS EN IEC 62442-1. Energy performance of lamp controlgear. Part 1. Controlgear for fluorescent lamps. Method of measurement to determine the total input power of controlgear circuits and the efficiency of controlgear
- 17/30332825 DC BS EN 62442-1 AMD11. Energy performance of lamp controlgear. Part 1. Controlgear for fluorescent lamps. Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear
Association Francaise de Normalisation, Deuterium lamp power
- NF C71-442-1:2013 Energy performance of lamp controlgear - Part 1: controlgear for fluorescent lamps - Method of measurement to dertermine the total input power of controlgear circuits and the efficiency of the controlgear
- NF C71-442-1*NF EN IEC 62442-1:2018 Energy performance of lamp controlgear - Part 1 : controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear
- NF C71-442-1*NF EN IEC 62442-1:2022 Energy performance of lamp controlgear - Part 1 : controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of controlgear
- NF EN IEC 62442-1:2022 Performance énergétique des appareillages de lampes - Partie 1 : appareillages des lampes à fluorescence - Méthode de mesurage pour la détermination de la puissance d'entrée totale des circuits d'appareillage et du rendement des appareillages
International Electrotechnical Commission (IEC), Deuterium lamp power
- IEC 62442-1:2011 Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear
- IEC 62442-1:2018 Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of controlgear
- IEC 62442-1:2022 RLV Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of controlgear
- IEC 62442-1:2018 RLV Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of controlgear
- IEC 62442-1:2022 Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of controlgear
European Committee for Electrotechnical Standardization（CENELEC）, Deuterium lamp power
- EN 62442-1:2011 Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear
- EN IEC 62442-1:2022 Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of controlgear
Danish Standards Foundation, Deuterium lamp power
- DS/EN 62442-1:2012 Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear
- DS/EN 62442-1/AC:2012 Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear
Lithuanian Standards Office , Deuterium lamp power
- LST EN 62442-1-2012/AC-2012 Energy performance of lamp controlgear -- Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear
- LST EN 62442-1-2012 Energy performance of lamp controlgear -- Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear (IEC 62442-1:2011)
AENOR, Deuterium lamp power
- UNE-EN 62442-1:2012/A11:2017 Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear
- UNE-EN 62442-1:2012 Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear
CENELEC - European Committee for Electrotechnical Standardization, Deuterium lamp power
- EN IEC 62442-1:2018 Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear
ES-UNE, Deuterium lamp power
- UNE-EN IEC 62442-1:2019 Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear
- UNE-EN IEC 62442-1:2022 Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of controlgear (Endorsed by Asociación Española de Normalización...
AT-OVE/ON, Deuterium lamp power
- OVE EN IEC 62442-1:2021 Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of controlgear (IEC 34C/1529/CDV) (english version)
German Institute for Standardization, Deuterium lamp power
- DIN 15560-104:2003 Projectors for film and television studios, stage and photographic use - Part 104: Daylight projector systems up to 4000 W rated power and special connectors