ZH
RU
ES

Proficiency testing method validation

Proficiency testing method validation, Total:500 items.

In the international standard classification, Proficiency testing method validation involves: Medical sciences and health care facilities in general, Quality, Tyres, Protection against fire, Installations in buildings, Shipbuilding and marine structures in general, Equipment for the chemical industry, Power stations in general, Burners. Boilers, Lifting equipment, Environmental protection, Microbiology, Gas and steam turbines. Steam engines, Company organization and management, Industrial trucks, Fibre optic communications, Thermodynamics and temperature measurements, Industrial automation systems, Data storage devices, Air quality, Veterinary medicine, Farming and forestry, Components and accessories for telecommunications equipment, Electronic components in general, General methods of tests and analysis for food products, Electricity. Magnetism. Electrical and magnetic measurements, Ground service and maintenance equipment, Aircraft and space vehicles in general, Metrology and measurement in general, Linear and angular measurements, Animal feeding stuffs, Measurement of volume, mass, density, viscosity, Test conditions and procedures in general, Ventilators. Fans. Air-conditioners, Fluid power systems, Applications of information technology, Construction materials, Road engineering, Non-destructive testing, Testing of metals, Analytical chemistry, Passenger cars. Caravans and light trailers, Pharmaceutics, Protection against crime, Cereals, pulses and derived products, Water quality, Packaging and distribution of goods in general, Optics and optical measurements, Measurement of fluid flow, Horology, Earth-moving machinery, Fluid storage devices, On-board equipment and instruments, Iron and steel products, Sports equipment and facilities, Electrical engineering in general, Aerospace electric equipment and systems, Products of the chemical industry, Sterilization and disinfection, Medical equipment, Tobacco, tobacco products and related equipment, Raw materials for rubber and plastics, Construction industry, Biology. Botany. Zoology, Measurement of force, weight and pressure.

Association Francaise de Normalisation, Proficiency testing method validation

NF X06-510*NF ISO 13528:2015 Statistical methods for use in proficiency testing by interlaboratory comparison
NF ISO 10231:2022 Pneumatiques pour motocycles - Méthodes d'essai pour la vérification de l'aptitude des pneumatiques
NF ISO 13528:2022 Méthodes statistiques utilisées dans les essais d'aptitude par comparaison interlaboratoires
NF X45-308:2000 Filter cartridges - Test methods - Verification of resistance to high temperatures.
NF E38-350:1995 Heat exchangers. Verification methods for thermodynamic performance of power plant condensers.
NF ISO 12828-2:2020 Méthode de validation des analyses de gaz d'incendie - Partie 2 : validation intralaboratoire des méthodes de quantification
NF EN ISO 16140-3:2021 Microbiologie de la chaîne alimentaire - Validation des méthodes - Partie 3 : protocole pour la vérification dans un seul laboratoire de méthodes de référence et de méthodes alternatives validées
NF V08-103-5*NF EN ISO 16140-5:2020 Microbiology of the food chain - Method validation - Part 4 : protocol for method validation in a single laboratory
NF V08-103-4*NF EN ISO 16140-4:2020 Microbiology of the food chain - Method validation - Part 4 : protocol for method validation in a single laboratory
NF X65-040-2*NF ISO 12828-2:2020 Validation method for fire gas analysis - Part 2 : Intralaboratory validation of quantification methods
NF EN ISO 16140-4:2020 Microbiologie de la chaîne alimentaire - Validation des méthodes - Partie 4 : protocole pour la validation de méthodes dans un seul laboratoire
NF U47-400:2014 Animal health analysis methods - Guide for the organisation of interlaboratory proficiency testing in animal health
NF R12-755*NF ISO 10191:2021 Passenger car tyres - Verifying tyre capabilities - Laboratory test methods
NF EN ISO/IEC 17043:2010 Évaluation de la conformité - Exigences générales concernant la compétence des organisateurs d'essais d'aptitude
NF V08-103-3*NF EN ISO 16140-3:2021 Microbiology of the food chain - Method validation - Part 3 : protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021)
XP V18-801*XP CEN/TS 17455:2020 Animal feeding stuffs - Methods of sampling and analysis - Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of mycotoxins
XP V18-800*XP CEN/TS 17174:2018 Animal feeding stuffs: Methods of sampling and analysis - Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of heavy metals
NF X45-306:2000 Filter cartridges - Test methods - Verification of the cleanliness.
XP CEN/TS 16800:2021 Lignes directrices pour la validation des méthodes d'analyse physico-chimiques
NF H96-312-1*NF EN 16842-1:2018 Powered industrial trucks - Visibilty - Test method and verification - Part 1 : general requirements
XP CEN/TS 17329-1:2019 Denrées alimentaires - Lignes directrices générales pour la validation des méthodes de PCR qualitative en temps réel - Partie 1 : validation intralaboratoire
NF EN ISO 16140-2:2016 Microbiologie de la chaîne alimentaire - Validation des méthodes - Partie 2 : protocole pour la validation de méthodes alternatives (commerciales) par rapport à une méthode de référence
NF V08-103-2*NF EN ISO 16140-2:2016 Microbiology of the food chain - Method validation - Part 2 : protocol for the validation of alternative (proprietary) methods against a reference method
XP V03-329-1*XP CEN/TS 17329-1:2019 Foodstuffs - General guidelines for the validation of qualitative real-time PCR methods - Part 1 : single- laboratory validation
NF X45-307:2000 Filter cartridges - Test methods - Verification of chemical resistance of filter elements.
NF C55-553-3*NF EN 60953-3:2002 Rules for steam turbine thermal acceptance tests - Part 3 : Thermal performance verification tests of retrofitted steam turbines
XP T90-800*XP CEN/TS 16800:2021 Guideline for the validation of physico-chemical analytical methods
BP S54-216:2013 Procedure for on site verification of impact attenuating capacity of playground surfacing
NF EN 17656:2022 Émissions de sources fixes - Exigences relatives aux programmes d'essais d'aptitude destinés aux mesurages des émissions
NF EN 16842-1:2018 Chariots de manutention automoteurs - Visibilité - Méthode d'essai pour la vérification - Partie 1 : prescriptions générales
NF ISO 10191:2021 Pneumatiques pour voitures particulières - Vérification de l'aptitude des pneumatiques - Méthodes d'essai en laboratoire
FD P92-540-3*FD ISO/TR 16730-3:2014 Fire safety engineering - Assesment, verification and validation of calculation methods - Part 3: example of a CFD model
NF EN ISO 16140-6:2019 Microbiologie de la chaîne alimentaire - Validation des méthodes - Partie 6 : protocole pour la validation de méthodes alternatives (commerciales) pour la confirmation microbiologique et le typage
NF EN ISO 16140-5:2020 Microbiologie de la chaîne alimentaire - Validation des méthodes - Partie 5 : protocole pour la validation interlaboratoires de méthodes non commerciales par plan factoriel
FD P92-540-5*FD ISO/TR 16730-5:2014 Fire safety Engineering - Assessment, verification and validation of calculation methods - Part 5 : example of an Egress model
FD P95-540-4*FD ISO/TR 16730-4:2013 Fire safety engineering - Assesment, verification and validation of calculation methods - Part 4 : example of a structural model
FD P95-540-2*FD ISO/TR 16730-2:2013 Fire safety engineering - Assessment, verification and validation of calculation methods - Part 2 : example of a Fire zone model
NF EN 13146-10:2017 Applications ferroviaires - Voie - Méthodes d'essai pour les systèmes de fixation - Partie 10 : essai de charge d'épreuve pour la résistance à l'arrachement
NF V37-022:2013 Routine analytical cigarette-smoking machine - Additional test methods for machine verification
NF S93-100*NF EN ISO 20072:2013 Aerosol drug delivery device design verification - Requirements and test methods
NF X45-310:2000 Filter cartridges - Test methods - Verification of the crushing or bursting strength.
NF EN 17038-2:2019 Pompes - Méthodes de qualification et de vérification de l'indice de rendement énergétique des groupes motopompes rotodynamiques - Partie 2 : essais et calcul de l'indice de rendement énergétique (EEI) des groupes motopompes simples
FD CEN/TR 16059:2011 Analyse des produits alimentaires - Critères de performance des méthodes validées monolaboratoires d'analyse des mycotoxines

未注明发布机构, Proficiency testing method validation

WS/T 514-2017 Establishment and verification of detection capability for clinical laboratory measurement procedures
BS EN ISO IEC 17043:2023 Conformity assessment — General requirements for the competence of proficiency testing providers
BS 6912-9:1992(1999) Safety of earth - moving machinery — Part 9 : Methods for the calculation and verification of the lift capacity of hydraulic excavators
BS ISO 18063-1:2016(2018) Rough - terrain trucks — Visibility — Test methods and their verification Part 1 : Variable - reach trucks

Professional Standard - Commodity Inspection, Proficiency testing method validation

SN/T 2723.3-2010 Laboratory proficiency testing.Part 3: Format and content of proficiency testing report
SN/T 2723.1-2010 Laboratory proficiency testing.Part 1:General principles
SN/T 2966-2011 Proficiency testing regulations for plant quarantine
SN/T 2723.2-2010 Laboratory proficiency testing.Part 2:Terms and glossary
SN/T 2989-2011 Protocol on proficiency testing of entry-exit animal quarantine laboratories
SN/T 3898-2014 Guidance on the validation and acceptance of cosmetics alternative testing methods in vitro
SN/T 4166-2015 Protocol on proficiency testing for morphological identification of vectors
SN/T 3782-2014 Rules for laboratory proficiency testing specification of manufacturing/marketing enterprises on import and export textiles
SN/T 4001-2015 Protocol of verification for animal quarantine method standards

CZ-CSN, Proficiency testing method validation

CSN 25 7216-1984 Working pressure gauges. ethods of verification.
CSN 25 7206-1984 Recording pressure gauges. ethods of verification
CSN 25 7209-1986 Indicating and recording differential pres- ure gauges. Methods of verification
CSN 25 3308-1980 Block gauges. Methods of verification
CSN 25 7217-1984 Pressure gauges with lelemeasuring evice. Methods of verification
CSN 25 7205-1981 Piston gauges. Method* of verification
CSN 25 7215-1986 Pressure gaugas and vacuum deformatio- al gaugas. Secondary standards. ethods of verification
CSN 25 8313-1985 Thermocouples. Soconclary standards. Methods of verification
CSN 25 7207-1980 Pressure gauges, anovacuometers and acuometers, indicating. ethods and means of erification.
CSN 25 6112-1986 Measuring device for length measuring of abric. Methods for verification
CSN 99 0378-1989 Length gauges for meter products. Methods of verification
CSN 99 4179-1990 Grain testers. Methods of verification and calibrating
CSN 25 6112-2004 Measuring device for lenght measuring of fabric - Methods for verification
CSN 25 7513-1984 Stationary measuring tanks. Technical requirements and verification methods
CSN 25 8307-1980 Industrial resistance temperature sensors. Methods of verification
CSN 25 8305-1980 Industrial thermocouple sensor clemont. Verification methods
CSN 99 4442-1989 Indenters for hardness testing machines Methods of verification
CSN 25 2303-1987 Surface roughness. Calibration speciemens. Methods of verification

TH-TISI, Proficiency testing method validation

TIS 5043.1-1997 Proficiency testing by interlaboratory comparisons.part 1: development and operation of proficiency testing schemes
TIS 5043.2-1997 Proficiency testing by interlaboratory comparisons.part 2: selection and use of proficiency testing schemes by laboratory accreditation bodies

International Organization for Standardization (ISO), Proficiency testing method validation

ISO/IEC Guide 43-1:1997 Proficiency testing by interlaboratory comparisons - Part 1: Development and operation of proficiency testing schemes
ISO 13528:2022 Statistical methods for use in proficiency testing by interlaboratory comparison
ISO 10191:2021 Passenger car tyres — Verifying tyre capabilities — Laboratory test methods
ISO/IEC Guide 43-2:1997 Proficiency testing by interlaboratory comparisons - Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies
ISO 14066:2011 Greenhouse gases - Competence requirements for greenhouse gas validation teams and verification teams
ISO 16140-3:2021 Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory
ISO 10231:2003 Motorcycle tyres - Test methods for verifying tyre capabilities
ISO 16140-4:2020 Microbiology of the food chain — Method validation — Part 4: Protocol for method validation in a single laboratory
ISO 16140-4:2020/DAmd 1 Microbiology of the food chain — Method validation — Part 4: Protocol for method validation in a single laboratory — Amendment 1: Validation of a larger test portion size for qualitative methods
ISO/IEC 17043 Conformity assessment — General requirements for the competence of proficiency testing providers
ISO 12828-2:2016 Validation methods for fire gas analyses - Part 2: Intralaboratory validation of quantification methods
ISO/DIS 16140-7 Microbiology of the food chain — Method validation — Part 7: Protocol for the validation of identification methods of microorganisms
ISO 16140-4:2020/CD Amd 1 Microbiology of the food chain — Method validation — Part 4: Protocol for method validation in a single laboratory — Amendment 1: Annex H - Validation of larger test portion size for qualitative methods
ISO 10231:2003/Amd 1:2015 Motorcycle tyres - Test methods for verifying tyre capabilities; Amendment 1
ISO 16140-5:2020 Microbiology of the food chain — Method validation — Part 5: Protocol for factorial interlaboratory validation for non-proprietary methods
ISO 16140-2:2016 Microbiology of the food chain - Method validation - Part 2: Protocol for the validation of alternative (proprietary) methods against a reference method
ISO/TS 21913:2022 Temperature verification method applied to dynamic fatigue testing
ISO 16300-3:2017 Automation systems and integration - Interoperability of capability units for manufacturing application solutions - Part 3: Verification and validation of interoperability among capability units
ISO 22140:2021 Passenger cars - Validation of vehicle dynamics simulation - Lateral transient response test methods
ISO 18063-1:2016 Rough-terrain trucks - Visibility - Test methods and their verification - Part 1: Variable-reach trucks
ISO 16140-2:2016/CD Amd 1 Microbiology of the food chain — Method validation — Part 2: Protocol for the validation of alternative (proprietary) methods against a reference method — Amendment 1
ISO 20072:2009 Aerosol drug delivery device design verification - Requirements and test methods
ISO/PRF TS 7013 Water quality — Guidance and requirements for designing an interlaboratory trial for validation of analytical methods

中国国家认证认可监督管理委员会, Proficiency testing method validation

RB/T 183-2017 Laboratory proficiency testing system table
RB/T 184-2017 Laboratory proficiency testing technical requirements for phytosanitary
RB/T 186-2017 Qualitative proficiency testing results evaluation specifications
RB/T 210-2017 Technical requirements for laboratory proficiency testing in the field of animal quarantine
RB/T 209-2017 Implementation Guidelines for Proficiency Testing in the Field of Medical Vector Biological Testing
RB/T 185-2017 Implementation guide for proficiency testing for visual assessment of color fastness of textiles

Danish Standards Foundation, Proficiency testing method validation

DS/ISO 13528:2005 Statistical methods for use in proficiency testing by interlaboratory comparisons
DS/EN ISO/IEC 17043:2011 Conformity assessment - General requirements for proficiency testing
DS/ISO 16140-3:2021 Microbiology of the food chain â€” Method validation â€” Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory
DS/EN ISO 16140-3:2021 Microbiology of the food chain – Method validation – Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021)
DS/ENV ISO/TR 13843:2001 Water quality - Guidance on validation of microbiological methods
DS/CEN/TS 17329-1:2021 Foodstuffs – General guidelines for the validation of qualitative real-time PCR methods – Part 1: Single-laboratory validation
DS/CEN/TS 16800:2021 Guideline for the validation of physico-chemical analytical methods
DS/ISO/TR 16730-2:2013 Fire safety engineering - Assessment, verification and validation of calculation methods - Part 2: Example of a fire zone model
DS/ISO/IEC 10373-2/Corr. 1:2010 Identification cards - Test methods - Part 2: Cards with magnetic stripes
DS/ISO/IEC 10373-2:2007 Identification cards - Test methods - Part 2: Cards with magnetic stripes
DS/EN 15830:2012 Rough-terrain variable reach trucks - Visibility - Test methods and verification
DS/EN ISO 20072:2013 Aerosol drug delivery device design verification - Requirements and test methods

ZA-SANS, Proficiency testing method validation

SANS 13528:2009 Statistical methods for use in proficiency testing by interlaboratory comparisons
SANS 60793-1-30:2001 Optical fibres Part 1-30: Measurement methods and test procedures - Fibre proof test

British Standards Institution (BSI), Proficiency testing method validation

BS ISO 13528:2022 Statistical methods for use in proficiency testing by interlaboratory comparison
BS ISO 12828-2:2016 Validation methods for fire gas analyses. Intralaboratory validation of quantification methods
BS EN ISO 16140-3:2021 Microbiology of the food chain. Method validation. Protocol for the verification of reference methods and validated alternative methods in a single laboratory
BS EN 16842-1:2018 Powered industrial trucks. Visibility. Test methods and verification - General requirements
BS IEC 62530-2:2021 SystemVerilog. Universal Verification Methodology Language Reference Manual
BS EN 17656:2022 Stationary source emissions. Requirements on proficiency testing schemes for emission measurements
BS EN ISO/IEC 17043:2010 Conformity assessment - General requirements for proficiency testing
BS EN ISO 16140-2:2016 Microbiology of the food chain. Method validation. Protocol for the validation of alternative (proprietary) methods against a reference method
BS EN ISO 16140-4:2020 Microbiology of the food chain. Method validation - Protocol for method validation in a single laboratory
BS EN ISO 16140-5:2020 Microbiology of the food chain. Method validation - Protocol for factorial interlaboratory validation for nonproprietary methods
BS PD CEN/TS 17329-1:2021 Foodstuffs. General guidelines for the validation of qualitative real-time PCR methods. Single-laboratory validation
BS PD CEN/TS 17174:2018 Animal feeding stuffs: Methods of sampling and analysis. Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of heavy metals
PD CEN/TS 17455:2020 Animal feeding stuffs. Methods of sampling and analysis. Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of mycotoxins
21/30427433 DC BS EN 17656. Stationary source emissions. Requirements on proficiency testing schemes for emission measurements
BS EN 15830:2012 Rough-terrain variable reach trucks. Visibility. Test methods and verification
20/30397485 DC BS ISO 10191. Passenger car tyres. Verifying tyre capabilities. Laboratory test methods
BS ISO 10191:2021 Tracked Changes. Passenger car tyres. Verifying tyre capabilities. Laboratory test methods
21/30423198 DC BS ISO/IEC CD2 17043. Conformity assessment. General requirements for the competence of proficiency testing providers
23/30452546 DC BS EN ISO 16140-7. Microbiology of the food chain. Method validation - Part 7. Protocol for the validation of identification methods of microorganisms
BS ISO 22140:2021 Passenger cars. Validation of vehicle dynamics simulation. Lateral transient response test methods
BS EN 60793-1-30:2002 Optical fibres - Measurement methods and test procedures - Fibre proof test
BS EN 60793-1-30:2011 Optical fibres. Measurement methods and test procedures. Fibre proof test
BS EN 60953-3:2002 Rules for steam turbine thermal acceptance tests - Thermal performance verification tests of retrofitted steam turbines
BS PD CEN/TS 16800:2015 Guideline for the validation of physico-chemical analytical methods
BS PD CEN/TS 16800:2020 Guideline for the validation of physico-chemical analytical methods
21/30430279 DC BS ISO 10231. Motorcycle tyres. Test methods for verifying tyre capabilities
BS ISO 14397-1:2007 Earth-moving machinery. Loaders and backhoe loaders. Calculation of rated operating capacity and test method for verifying calculated tipping load
BS ISO 14397-1:2007+A1:2019 Earth-moving machinery. Loaders and backhoe loaders. Calculation of rated operating capacity and test method for verifying calculated tipping load
PD ISO/TS 21913:2022 Temperature verification method applied to dynamic fatigue testing
BS EN 16842-10:2020 Powered industrial trucks. Visibility. Test methods and verification - Towing and Pushing tractors and Burden carrier
BS EN ISO 16140-1:2016 Microbiology of the food chain. Method validation. Vocabulary
BS EN ISO 16140-6:2019 Microbiology of the food chain. Method validation - Protocol for the validation of alternative (proprietary) methods for microbiological confirmation and typing procedures
BS DD IEC TS 60695-11-3:2004 Fire hazard testing - Test flames - 500 W flames - Apparatus and confirmational test methods
BS EN 60695-11-4:2011 Fire hazard testing. Test flames. 50 W flame. Apparatus and confirmational test method
BS 7935-1:2004 Constant amplitude dynamic force calibration - Calibration and verification of non-resonant uniaxial dynamic testing systems - Method

German Institute for Standardization, Proficiency testing method validation

DIN ISO 13528:2020-09 Statistical methods for use in proficiency testing by interlaboratory comparison (ISO 13528:2015, Corrected version 2016-10-15); Text in German and English
DIN EN ISO 16140-3:2021-06 Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021); German version EN ISO 16140-3:2021
DIN EN ISO 16140-4:2020-12 Microbiology of the food chain - Method validation - Part 4: Protocol for method validation in a single laboratory (ISO 16140-4:2020); German version EN ISO 16140-4:2020
DIN EN ISO/IEC 17043:2010-05 Conformity assessment - General requirements for proficiency testing (ISO/IEC 17043:2010); German and English version EN ISO/IEC 17043:2010 / Note: To be replaced by DIN EN ISO/IEC 17043 (2022-06).
DIN EN 17656:2022-12 Stationary source emissions - Requirements on proficiency testing schemes for emission measurements; German version EN 17656:2022 / Note: Applies in conjunction with DIN EN ISO/IEC 17043 (2010-05).
DIN EN 17656:2022 Stationary source emissions - Requirements on proficiency testing schemes for emission measurements
DIN ISO 13528:2020 Statistical methods for use in proficiency testing by interlaboratory comparison (ISO 13528:2015, Corrected version 2016-10-15); Text in German and English
DIN CEN/TS 17174:2018-10*DIN SPEC 10796:2018-10 Animal feeding stuffs: Methods of sampling and analysis - Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of heavy metals; German version CEN/TS 17174:2018
DIN EN ISO 16140-5:2020-12 Microbiology of the food chain - Method validation - Part 5: Protocol for factorial interlaboratory validation for non-proprietary methods (ISO 16140-5:2020); German version EN ISO 16140-5:2020
DIN EN ISO 16140-3:2018 Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference and validated alternative methods implemented in a single laboratory (ISO/DIS 16140-3:2017); German and English version prEN ISO 16140-3:2017
DIN EN 16842-1:2018 Powered industrial trucks - Visibility - Test methods and verification - Part 1: General requirements
DIN EN 16842-1:2018-10 Powered industrial trucks - Visibility - Test methods and verification - Part 1: General requirements; German version EN 16842-1:2018
DIN CEN/TS 17455:2020-07 Animal feeding stuffs - Methods of sampling and analysis - Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of mycotoxins; German version CEN/TS 17455:2020
DIN EN ISO 16140-4/A1:2023-08 Microbiology of the food chain - Method validation - Part 4: Protocol for method validation in a single laboratory - AMENDMENT 1: Validation of a larger test portion size for qualitative methods (ISO 16140-4:2020/DAM 1:2023); German and English version...
DIN EN ISO 16140-2:2016-11 Microbiology of the food chain - Method validation - Part 2: Protocol for the validation of alternative (proprietary) methods against a reference method (ISO 16140-2:2016); German version EN ISO 16140-2:2016
DIN CEN/TS 17329-1:2021-09 Foodstuffs - General guidelines for the validation of qualitative real-time PCR methods - Part 1: Single-laboratory validation; German version CEN/TS 17329-1:2021
DIN EN ISO 16140-7:2023-05 Microbiology of the food chain - Method validation - Part 7: Protocol for the validation of identification methods of microorganisms (ISO/DIS 16140-7:2023); German and English version prEN ISO 16140-7:2023 / Note: Date of issue 2023-04-21
DIN EN ISO 16140-2:2016 Microbiology of the food chain - Method validation - Part 2: Protocol for the validation of alternative (proprietary) methods against a reference method (ISO 16140-2:2016)
DIN EN 17656:2021 Stationary source emissions - Requirements on proficiency testing schemes for emission measurements; German and English version prEN 17656:2021
DIN EN 13146-10:2017-05 Railway applications - Track - Test methods for fastening systems - Part 10: Proof load test for pull-out resistance; German version EN 13146-10:2017
DIN 38402-45:2014-06 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 45: Interlaboratory comparisons for proficiency testing of laboratories (A 45)
DIN EN 16842-5:2021-04 Powered industrial trucks - Visibility - Test methods and verification - Part 5: Industrial variable-reach trucks greater than 10000 kg capacity; German version EN 16842-5:2021 / Note: Applies in conjunction with DIN EN 16842-1 (2018-10).
DIN CEN/TS 16800:2016-03*DIN SPEC 38402-61:2016-03 Guideline for the validation of physico-chemical analytical methods (CEN/TS 16800:2015); German version CEN/TS 16800:2015
DIN EN ISO 16140-6:2020-04 Microbiology of the food chain - Method validation - Part 6: Protocol for the validation of alternative (proprietary) methods for microbiological confirmation and typing procedures (ISO 16140-6:2019); German version EN ISO 16140-6:2019
DIN EN ISO 16140-4:2020 Microbiology of the food chain - Method validation - Part 4: Protocol for method validation in a single laboratory (ISO 16140-4:2020); German version EN ISO 16140-4:2020

RU-GOST R, Proficiency testing method validation

GOST R 50779.60-2017 Statistical methods for use in proficiency testing by interlaboratory comparison
GOST R 57639-2017 Fire safety engineering. Validation and verification of calculation methods
GOST ISO/IEC 17043-2013 Conformity assessment. General requirements for proficiency testing
GOST 12441-1966 Horisontal length comparators. Methods and means for verification
GOST R 8.680-2009 State system for ensuring the uniformity of measurements. Volumetric glassware. Verification procedure
GOST R 8.630-2007 State system for ensuring the uniformity of measurements. Atomic-force scanning probe microscopes. Methods for verification
GOST ISO 10454-2013 Truck and bus tyres. Verifying tyres capabilities. Laboratory test methods
GOST 8.351-1979 State system for ensuring the uniformity of measurements. Slotted lines. Methods and means for verification
GOST R 8.708-2010 State system for ensuring the uniformity of measurements. Piezosorbtion hygrometers. Verification procedure
GOST 15982-1970 Levels with micrometrical feed of ampule. Methods and means of veritification
GOST R ISO 11170-2010 Hydraulic fluid power. Filter elements. Sequence of tests for verifying performance characteristics
GOST 8.216-2011 State system for ensuring the uniformity of measurements. Voltage transformers. Verification procedure
GOST 8.046-1985 State system for ensuring the uniformity of measurements. Optical dividing heads. Verification methods
GOST 8.216-1988 State system for ensuring the uniformity of measurements. Voltage transformers. Verification methods
GOST 8.252-1977 State system for ensuring the uniformity of measurements. Tachometric ball flowmeters. Methods and means for verification
GOST 8.286-1978 State system for ensuring the uniformity of measurements. Electrical timemeters. Methods and means for verification
GOST 8.366-1979 State system for ensuring the uniformity of measurements. Digital ohmmeters. Methods and means for verification
GOST R 8.789-2012 State system for ensuring the uniformity of measurements. The bomb calorimeters. The method of the verification
GOST 8.320-1978 State system for ensuring the uniformity of measurements. Flowmeter electromagnetic industry. Methods and means for verification
GOST R 8.732-2011 State system for ensuring the uniformity of measurements. State verification schedule for means measuring inductance
GOST 8.311-1978 State system for ensuring the uniformity of measurements. Cathode-ray oscillographs. Methods and means for verification
GOST R 8.683-2009 State system for ensuring the uniformity of measurements. Selective electronic voltmeters. Verification methods
GOST R 8.704-2010 State system for ensuring the uniformity of measurements. Working dilatometers. Verification procedure
GOST 30159-1994 Wood chemical products. Provision of accuracy for testing methods
GOST 24297-2013 Verification of purchased product. Organization and methods of control
GOST 8.341-1979 State system for ensuring the uniformity of measurements. Low-pressure pneumatic length gages. Methods and means for verification
GOST R 8.685-2009 State system of ensuring the uniformity of measurements. Diode slideback voltmeters. Verification methods

Korean Agency for Technology and Standards (KATS), Proficiency testing method validation

KS A ISO/IEC GUIDE 43-1-2002(2012) Proficiency testing by interlaboratory comparisons－Part 1：Development and operation of proficiency testing schemes by laboratory accreditation bodies
KS A ISO/IEC GUIDE 43-2-2002(2012) Proficiency testing by interlaboratory comparisons－Part 2：Selection and use of proficiency testing schemes by laboratory accreditation bodies
KS I ISO 14066-2016(2021) Greenhouse gases -- Competence requirements for greenhouse gas validation teams and verification teams
KS M ISO 10231:2021 Motorcycle tyres — Test methods for verifying tyre capabilties
KS M ISO 10231:2010 Motorcycle tyres－Test methods for verifying tyre capabilities
KS M ISO 10191-2012(2022) Passenger car tyres－Verifying tyre capabilities－Laboratory test methods
KS Q ISO/IEC 17043:2021 Conformity assessment — General requirements for proficiency testing
KS Q ISO/IEC 17043-2011(2016) Conformity assessment－General requirements for proficiency testing
KS M ISO 10454-2007(2022) Truck and bus tyres－Verifying tyre capabilities－Laboratory test methods
KS B ISO 3453-2006(2011) Non－destructive testing－Liquid penetrant inspection－Means of verification
KS I ISO TR 13843-2007(2012) Water quality－Guidance on validation of microbiological methods

CU-NC, Proficiency testing method validation

NC 90-07-02-1984 Metrological Assurance. Manometers for Tyres. Verification Methods and Means
NC 90-11-13-1987 Metrological Assurance. Installations to Verify Clocks. Methods and Means of Verification
NC 90-08-04-1987 Metrological Assurance. Cable In-11. Tensiometers. Methods and Means of Verification
NC 90-18-06-1988 Standards System for Metrological Assurance. Gamma Radiation Sources. Exposure Power Measures. Methods and Means of Verification
NC 90-14-01-1985 Metrologlcal Assurance. Working Resistcince Thermometers. Verificatlon Methods and Means
NC 90-04-20-1987 Metrological Assurance. Picnometers. Methods and Means of Verification
NC 90-03-01-1986 Metrological Assurance Square and Bar Levels Verification Methods and Means
NC 90-14-26-1985 Metrological Assurance. Recording Manóme trie Thermometers with Electric Contact Devices, Verification Methods and Means
NC 90-08-05-1984 Metrological Assurance. Portable Standard Dynamometers 3. Categors
NC 90-03-07-1987 Metrological Assurance. Micrometric Levels. Methods and Means of Verification
NC 90-15-26-1984 Metrological Assurance. lnductance Measures. Verificatlon Methods and Means
NC 90-14-31-1986 Metrological Assurance. Thorraographs. Verification Methods and Means
NC 90-15-34-1987 Metrological Assurance Phasemeters, Class 0.5 Methods and Means of Verification
NC 90-03-09-1987 Metrological Assurance. Geodesia Levels. Verification Methods and Means
NC 90-19-16-1987 Metrological Assurance. Impedance Meters. Methods and Means of Verification
NC 90-03-10-1987 Metrological Assurance. Level Testers. Methods and Means of Verification
NC 90-13-32-1985 Metrological Assurance. Refractometers. Verifícation Methods and Means
NC 90-13-30-1985 Metrological Assurance. Conductometers Verlfícation Methods and Means
NC 90-19-13-1985 Metrologial Assurance. lectrocardiographs. Verification ethods and Means
NC 90-19-14-1985 Metrological Assurance. ID 0550 LOGICID Universal igital Tester. Verification ethods and Means
NC 90-08-07-1985 Metrological Assurance. Dynamometric Rings. Verification Methods and Means
NC 90-01-64-1988 Standards System for Metrological Assurance. Micators. Methods and Means of Verification
NC 90-13-07-1984 Metrological Assurance. Photoelectric Coiorimeters. Verification Methods and Means
NC 90-13-14-1986 Metrological Assurance. pH Meters. Verification Methods and Means
NC 90-07-08-1986 Metrological Assurance. Elastic Deformation Standard Manometers and Vaouometers, Verification Methods and Means
NC 90-19-20-1987 Metrological Assurance. Impulse Voltmeters. Methods and Means of Verification
NC 90-13-37-1986 Metrological Assurance. Hair Hygrometer. Verification Methods and Means
NC 90-08-10-1987 Metrological Assurance. Dynamometrie Wrenches. Verification Methods and Means
NC 90-13-40-1987 Metrological Assurance. Polarimetric Quartz Plates. Methods and Means of Verifications
NC 90-19-18-1987 Metrological AssuranceQuality Gager. Methods and Means of Verification
NC 90-07-33-1987 Metrological Assurance. Aneroid Barometers. Methods and Means of Verification
NC 90-19-24-1988 Standards System for Metrological Assurance. Frecuency Deviation Meters. Methods and Means of Verification
NC 90-14-29-1986 Metrological Assurance. Electronic Thermoregulators. Verification Methods and Means
NC 90-11-10-1985 Metrological Assurance. Maritime Chronometers. Verification Methods and Means
NC 90-15-35-1987 Metrological Assurance. 1. to 5. Class Working Voltmeters. Methods and Means of Verification
NC 90-04-15-1986 Metrologioal Assiirance. Glass-Capaclty Standard Measures. Verification Methods and Means
NC 90-11-11-1986 Metrological Assurance. Chess Mechanical Clock. Verification Means and Methods
NC 90-14-19-1984 Metrological Assurance. Photoelectric Pyrometers Verification Methods and Means
NC 90-04-08-1984 Metrological Assurance Pipettes fop General Use. Verification Methods and Means
NC 90-11-12-1986 Metrological Assurance. Time Delay Measurement. Measurement Methods and Means
NC 90-14-18-1984 Metrological Assurance. Automatic Adjusten Balances. Verification Methods and Means
NC 90-19-03-1984 Metrological Assurance. Digital lectronic Frequencimeters erification Methods and Means
NC 90-18-05-1988 Standards System for Metrological Assurance. Impulse Counters. Methods and Means of Verification
NC 90-14-32-1987 Metrological Assurance. Standard Platinum Resistance Thermometers. Methods and Means of Verification
NC 90-15-31-1984 Metrological Assurance. Digital Megaohmmeters and Teraohmmeters. Verification Methods and Means
NC 90-07-03-1985 Metrological Assurance. Elastic Deformation Manometers, Vacuometers and Manovacuometers, Working Indicators. Verification Methods and Means
NC 90-08-08-1986 Metrological Assurance. Sclerometer "SCHMIDT", Type N Verification Methods and Means
NC 90-06-37-1984 Metrological Assurance. BalanceBar and Sliding Block Scales Verification Methods and Means
NC 90-19-17-1987 Metrological Assurance. Low Frecuency Selective Microvoltrneters. Methods and Means of Verification
NC 90-15-36-1988 Standards System for Metrological Assurance. PE-11 Tester. Methods and Means of Verification
NC 90-16-02-1989 Standards System for Metrological Assurance. Wow,Flutter and Drift Meters. Methods and Means of Verification
NC 54-391-1987 Construction Materials Concrete. Methods and Means of Verification
NC 90-07-04-1986 Metrological Assurance. Elastic Deformation Manometers, Vacuometers and Manovaouometers. Recording. Verification Methods and Means
NC 90-15-37-1988 Standards System for Metrological Assurance. 1. to 5. Class Measuring Clamps. Methods and Means of Verification
NC 90-14-08-1984 Metrological Assurance. Working Resistance Thermometers from 73, 15 up to 273, 15 K. Verification Methods and Means
NC 90-05-07-1986 Metrological Assurance. Industrial Variable Area Flowmeter for Liquids. Verification Methods and Means
NC 90-07-10-1984 Metrological Assurance Diffentical Manometers with Pneumatic Output Signal Verification Method and Means
NC 90-19-19-1987 Metrological Assurance, HighFrecuency Alternating Current Voltmeters. Methods and Means of Verification
NC 90-14-35-1988 Standards System for Metrological Assurance. Metastatic Working-Thermometers. Methods and Means of Verification
NC 90-01-65-1989 Standards System for Metrological Assurance. Planoparallel Measures. Methods and Means of Verification
NC 90-14-27-1985 Metrological Assurance. MercuryFilled Glass Thermometers with Electrical Contact. Verification Methods and Means
NC 90-04-18-1988 Standards System for Metrological Assurance. Tanker Truck for Oil and By-Products. Methods and Means of Verification
NC 90-19-15-1987 Metrological Assurance. HighStability Standard Generators Verification Methods and Means

国家市场监督管理总局、中国国家标准化管理委员会, Proficiency testing method validation

GB/T 28043-2019 Statistical methods for use in proficiency testing by interlaboratory comparison
GB/T 30024-2020 Cranes—Proof of competence of steel structures
GB/T 38122-2019 Fingerprint recognition application in public security—Testing and evaluation methods for verification algorithm performance

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Proficiency testing method validation

GB/T 28043-2011 Statistical methods for use in proficiency testing by interlaboratory comparisons
GB/T 27409-2010 Application of proficiency testing in the medical laboratory
GB/T 15483.1-1999 Proficiency testing by interlaboratory comparisons--Part 1: Development and operation of proficiency testing schemes
GB/T 30010-2013 Method for the verification of energy efficiency design index of ships
GB/T 30024-2013 Cranes.Proof of competence of steel structures
GB/T 8117.3-2014 Rules for steam turbine thermal acceptance test.Part 3:Method C.Thermal performance verification tests of retrofitted steam turbines
GB/T 15483.2-1999 Proficiency testing by interlaboratory comparisons--Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies
GB/T 15647-1995 Compliance test procedures for steady-state availability
GB/T 27043-2012 Conformity assessment.General requirements for proficiency testing

IN-BIS, Proficiency testing method validation

Professional Standard - Certification and Accreditation, Proficiency testing method validation

RB/T 194-2015 Guidelines for the Implementation of Forensic DNA Identification Proficiency Testing

Sichuan Provincial Standard of the People's Republic of China, Proficiency testing method validation

DB51/T 1202-2011 Specifications for proficiency testing of agricultural product inspection laboratories

Henan Provincial Standard of the People's Republic of China, Proficiency testing method validation

DB4112/T 310-2022 Verification specification for calibration capability of elevator speed limiter

AASHTO - American Association of State Highway and Transportation Officials, Proficiency testing method validation

T 67-2008 Standard Method of Test for Standard Practices for Force Verification of Testing Machines
T 67-2005 Standard Method of Test for Standard Practices for Force Verification of Testing Machines
T 67-2004 Standard Method of Test for Standard Practices for Force Verification of Testing Machine (ASTM Designation: E 4-02)
T 67-2003 Standard Method of Test for Standard Practices for Force Verification of Testing Machine (ASTM Designation: E 4-01)
T 67-2000 Standard Method of Test for Standard Practices for Force Verification of Testing Machine (Twentieth Edition; ASTM E4-98a)
T 67-1985 Standard Method of Test for Standard Practices for Load Verification of Testing Machines

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Proficiency testing method validation

ASHRAE SE-99-6-3-1999 Validation of Two French Building Energy Programs@ Part 2: Parameter Estimation Method Applied to Empirical Validation
ASHRAE SE-99-6-1-1999 Overview of Validation Methods for Energy and Environmental Software
ASHRAE SE-99-6-2-1999 Validation of Two French Building Energy Programs@ Part 1: Analytical Verification
ASHRAE 51-2016 Laboratory Methods of Testing Fans for Certified Aerodynamic Performance Rating
ASHRAE 3717-1993 Verification of Three Energy Estimation Programs for a Low- Energy House

BELST, Proficiency testing method validation

STB 941.3-93 System of accreditation of verification ant testing laboratory of Belarus. General requirements for estimation of technical competence verification and testing laboratory

Shanghai Provincial Standard of the People's Republic of China, Proficiency testing method validation

DB31/T 1364-2022 Technical specification for proficiency verification of inspection and testing institutions
DB31/T 764-2013 Validation test methods for content of solid waste in inorganic building materials

Jiangsu Provincial Standard of the People's Republic of China, Proficiency testing method validation

DB32/T 4550-2023 Work procedures for proficiency verification of inspection and testing institutions

AGMA - American Gear Manufacturers Association, Proficiency testing method validation

90FTM2-1990 An Industrial Approach for Load Capacity Calculation of Worm Gears (Verifying and Design)

KR-KS, Proficiency testing method validation

KS I ISO 14066-2016 Greenhouse gases -- Competence requirements for greenhouse gas validation teams and verification teams
KS M ISO 10231-2021 Motorcycle tyres — Test methods for verifying tyre capabilties
KS Q ISO/IEC 17043-2021 Conformity assessment — General requirements for proficiency testing
KS J ISO 21899-2023 Biotechnology — Biobanking — General requirements for the validation and verification of processing methods for biological material in biobanks

工业和信息化部, Proficiency testing method validation

JB/T 12992.2-2018 Measurement and Verification Methods for Energy Savings in Motor Systems Part 2: Measurement and Verification Methods for Energy Savings in Pump Systems
YD/T 3782-2020 Mobile communication smart terminal vulnerability verification method

European Committee for Standardization (CEN), Proficiency testing method validation

EN ISO 16140-3:2021 Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021)
EN ISO 16140-4:2020 Microbiology of the food chain - Method validation - Part 4: Protocol for method validation in a single laboratory (ISO 16140-4:2020)
EN 17656:2022 Stationary source emissions - Requirements on proficiency testing schemes for emission measurements
CEN/TS 17174:2018 Animal feeding stuffs: Methods of sampling and analysis - Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of heavy metals
PD CEN/TS 17174:2018 Animal feeding stuffs: Methods of sampling and analysis - Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of heavy metals
EN 16842-1:2018 Powered industrial trucks - Visibility - Test methods and verification - Part 1: General requirements
EN ISO 16140-5:2020 Microbiology of the food chain - Method validation - Part 5: Protocol for factorial interlaboratory validation for non-proprietary methods (ISO 16140-5:2020)
EN ISO 16140-2:2016 Microbiology of the food chain - Method validation - Part 2: Protocol for the validation of alternative (proprietary) methods against a reference method (ISO 16140-2:2016)
EN 15830:2012 Rough-terrain variable reach trucks - Visibility - Test methods and verification
PD CEN/TS 17329-1:2021 Tracked Changes. Foodstuffs. General guidelines for the validation of qualitative real-time PCR methods. Single-laboratory validation
EN ISO/IEC 17043:2023 Conformity assessment - General requirements for the competence of proficiency testing providers (ISO/IEC 17043:2023)
PD CEN/TS 16800:2015 Guideline for the validation of physico-chemical analytical methods
PD CEN/TS 16800:2020 Guideline for the validation of physico-chemical analytical methods
FprEN ISO/IEC 17043 Conformity assessment - General requirements for the competence of proficiency testing providers (ISO/IEC/FDIS 17043:2023)
prEN 17656-2021 Stationary source emissions - Requirements on proficiency testing schemes for emission measurements

VN-TCVN, Proficiency testing method validation

TCVN 7532-2005 Passenger car tyres.Verifying tyre capabilities.Laboratory test methods
TCVN 7533-2005 Truck and bus tyres.Verifying tyre capabilities.Laboratory test methods
TCVN 5728-1993 Measuring means of Vicker hardness.Verification schedules
TCVN 4547-1994 Barges for oil produsts.Method and means of verification

Professional Standard - Public Safety Standards, Proficiency testing method validation

GA/T 999-2012 Test method for verifying field performance of smoke management system.Hot smoke test
GA/T 1170-2014 Examination methods for evidence collection from mobile terminals
GA/T 1200-2014 Methods for examination of light distribution of evidence photography in forensic science

应急管理部, Proficiency testing method validation

XF/T 999-2012 On-site verification method of smoke prevention and exhaust system performance hot smoke test method

Indonesia Standards, Proficiency testing method validation

SNI ISO/IEC 17043:2010 Conformity assessment - General requirements for proficiency testing
SNI ISO/TR 13843:2011 Water quality - Guidance on validation of microbiological methods
SNI 7389.3-2009

Group Standards of the People's Republic of China, Proficiency testing method validation

T/HNCAA 027-2021 Verification of inspection and testing standard methods
T/GDCAA 003-2022 Technical specification for proficiency testing in the Guangdong-Hong Kong-Macao Area
T/CIE 130-2022 Formal design and verification method of blockchain smart contract
T/CECS 1197-2022 Selection and result application standards for proficiency verification of construction and building materials inspection and testing institutions

Professional Standard - Post and Telecommunication, Proficiency testing method validation

YD/T 716-1994 Test method for screening (verification) of optical fiber strength Longitudinal tension winding method
YD/T 3248.3-2017 Installation performance test methods for telecommunication optical fibre cables.Part 3: Microduct route verification
YD/T 3248.1-2017 Installation performance test methods for telecommunication optical fibre cables.Part 1: Microduct inner clearance verification

American Society for Testing and Materials (ASTM), Proficiency testing method validation

ASTM E2918-18 Standard Test Method for Performance Validation of Thermomechanical Analyzers
ASTM E2918-18a Standard Test Method for Performance Validation of Thermomechanical Analyzers
ASTM E2918-13 Standard Test Method for Performance Validation of Thermomechanical Analyzers
ASTM E2918-23 Standard Test Method for Performance Validation of Thermomechanical Analyzers
ASTM E4-79 Standard Methods of Load Verification Of Testing Machines
ASTM E77-98(2003) Standard Test Method for Inspection and Verification of Thermometers
ASTM E77-98 Standard Test Method for Inspection and Verification of Thermometers
ASTM E77-14 Standard Test Method for Inspection and Verification of Thermometers
ASTM E2857-11(2021)e1 Standard Guide for Validating Analytical Methods
ASTM E2857-21 Standard Guide for Validating Analytical Methods
ASTM E2857-22 Standard Guide for Validating Analytical Methods
ASTM E2857-11(2016) Standard Guide for Validating Analytical Methods
ASTM E2857-11 Standard Guide for Validating Analytical Methods
ASTM D8282-19 Standard Practice for Laboratory Test Method Validation and Method Development
ASTM E77-14e1 Standard Test Method for Inspection and Verification of Thermometers
ASTM E77-14(2021) Standard Test Method for Inspection and Verification of Thermometers
ASTM E2709-14e1 Standard Practice for Demonstrating Capability to Comply with an Acceptance Procedure
ASTM E2709-12 Standard Practice for Demonstrating Capability to Comply with an Acceptance Procedure
ASTM F3263-17 Standard Guide for Packaging Test Method Validation
ASTM E915-19 Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement
ASTM F1062-97 Standard Test Method for Verification of Ski Binding Test Devices
ASTM E2709-19 Standard Practice for Demonstrating Capability to Comply with an Acceptance Procedure
ASTM E2709-19(2023) Standard Practice for Demonstrating Capability to Comply with an Acceptance Procedure
ASTM D7372-21 Standard Guide for Analysis and Interpretation of Proficiency Test Program Results
ASTM E2709-23 Standard Practice for Demonstrating Capability to Comply with an Acceptance Procedure
ASTM F1062-97(2013) Standard Test Method for Verification of Ski Binding Test Devices
ASTM E126-13 Standard Test Method for Inspection, Calibration, and Verification of ASTM Hydrometers
ASTM E3116-18 Standard Test Method for Viscosity Measurement Validation of Rotational Viscometers
ASTM D4821-14 Standard Guide for Carbon Blackmdash;Validation of Test Method Precision and Bias

ES-UNE, Proficiency testing method validation

UNE-EN ISO 16140-3:2021 Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021)
UNE-EN ISO 16140-4:2021 Microbiology of the food chain - Method validation - Part 4: Protocol for method validation in a single laboratory (ISO 16140-4:2020)
UNE-EN 17656:2023 Stationary source emissions - Requirements on proficiency testing schemes for emission measurements
UNE-CEN GUIA 13:2010 IN Validation of environmental test methods
UNE-EN ISO 16140-5:2021 Microbiology of the food chain - Method validation - Part 5: Protocol for factorial interlaboratory validation for non-proprietary methods (ISO 16140-5:2020)
UNE-CEN/TS 17455:2021 Animal feeding stuffs - Methods of sampling and analysis - Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of mycotoxins
UNE-EN 16842-1:2019 Powered industrial trucks - Visibility - Test methods and verification - Part 1: General requirements
UNE-EN ISO 16140-2:2016 Microbiology of the food chain - Method validation - Part 2: Protocol for the validation of alternative (proprietary) methods against a reference method (ISO 16140-2:2016)
UNE-CEN/TS 17329-1:2021 Foodstuffs - General guidelines for the validation of qualitative real-time PCR methods - Part 1: Single-laboratory validation (Endorsed by Asociación Española de Normalización in August of 2021.)
UNE-EN 16842-10:2021 Powered industrial trucks - Visibility - test methods and verification - Part 10: Towing and Pushing tractors and Burden carrier
UNE-CEN/TS 16800:2020 Guideline for the validation of physico-chemical analytical methods (Endorsed by Asociación Española de Normalización in February of 2021.)
UNE 80404:2018 Methods of testing cement. Validation of cement test methods.
UNE 202009-25:2021 Methodology for periodic verification of electrical installations at homes.
UNE-EN 13146-10:2017 Railway applications - Track - Test methods for fastening systems - Part 10: Proof load test for pull-out resistance
UNE-EN ISO 16140-6:2020 Microbiology of the food chain - Method validation - Part 6: Protocol for the validation of alternative (proprietary) methods for microbiological confirmation and typing procedures (ISO 16140-6:2019)

Compressed Gas Association (U.S.), Proficiency testing method validation

CGA M-6-2013 Guideline for analytical method volidation

国家市场监督管理总局, Proficiency testing method validation

RB/T 063-2021 Verification and validation requirements for management and technical capability evaluation methods of inspection and testing institutions
RB/T 079-2021 Implementation Guide for House Hazard Identification Proficiency Testing
RB/T 004-2019 Validation Guidelines for GMO Detection Methods
RB/T 060.4-2021 Forensic Authentication/Forensic Science Proficiency Testing Implementation Guide Part 4: Document Authentication
RB/T 060.2-2021 Forensic Identification/Forensic Science Proficiency Testing Implementation Guide Part 2: Forensic Clinical Identification
RB/T 060.3-2021 Forensic Identification/Forensic Science Proficiency Testing Implementation Guide Part 3: Forensic Toxicology Identification
RB/T 060.1-2021 Forensic Identification/Forensic Science Proficiency Testing Implementation Guide Part 1: Forensic Pathology Identification
RB/T 031-2020 Guidelines for Selection and Verification of Proficiency Testing Plans and Utilization of Results
RB/T 033-2020 Guidelines for Validation and Validation of Microbiological Test Methods
RB/T 060.5-2021 Implementation Guidelines for Forensic Identification/Forensic Science Proficiency Testing Part 5: Identification of Audiovisual Materials

American National Standards Institute （ANSI), Proficiency testing method validation

ANSI/SCTE 34-2010 Test Method for Cored Depth Verification
ANSI/ASHRAE 51-2016 Laboratory Methods of Testing Fans for Certified Aerodynamic Performance Rating
ANSI/AMCA 210/ASHRAE51-2007 Laboratory Methods of Testing Fans for Certified Aerodynamic Performance Rating
ANSI/TIA/EIA 455-31C-1994 Proof Testing Optical Fibers by Tension
BS EN ISO/IEC 17043:2023 Conformity assessment. General requirements for the competence of proficiency testing providers (British Standard)
ANSI/ASTM E915:1996 Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement
ANSI/AMCA 230-2012 Laboratory Methods of Testing Air Circulating Fans for Rating and Certification

IX-IX-ISO, Proficiency testing method validation

ISO/IEC 17043:2023 Conformity assessment - General requirements for the competence of proficiency testing providers

未注明发布机构, Proficiency testing method validation

WS/T 514-2017 Establishment and verification of detection capability for clinical laboratory measurement procedures
BS EN ISO IEC 17043:2023 Conformity assessment — General requirements for the competence of proficiency testing providers
BS 6912-9:1992(1999) Safety of earth - moving machinery — Part 9 : Methods for the calculation and verification of the lift capacity of hydraulic excavators
BS ISO 18063-1:2016(2018) Rough - terrain trucks — Visibility — Test methods and their verification Part 1 : Variable - reach trucks

Professional Standard - Electricity, Proficiency testing method validation

DL/T 1593-2016 Reliability Verification Method of Electric Energy Information Collection Terminal

Professional Standard - Civil Aviation, Proficiency testing method validation

MH/T 6096-2013 Proficiency testing procedures for commercial aviation oil testing laboratory

DE-GPVA, Proficiency testing method validation

AD 2000-Merkblatt S3/2-2004 Special cases.General verification of stability for pressure vessels.Verification of load-carrying capacity for horizontal vessels on saddle supports

Society of Automotive Engineers (SAE), Proficiency testing method validation

SAE AS4270-1995 Validation Methods for Mil-Std-1760 Mission Stores
SAE AS4270-2012 Validation Methods for MIL-STD-1760 Mission Stores
SAE AS42701-2014 Validation Methods For MIL-STD-1760D Mission Stores
SAE AS4764-1995 Validation Methods for Mil-Std-1760 Aircraft Station Interfaces
SAE AS4764-2012 Validation Methods for MIL-STD-1760 Aircraft Station Interfaces
SAE AS47642A-2012 Validation Methods for MIL-STD-1760C Aircraft Station Interfaces
SAE AS47641-2012 Validation Methods for MIL-STD-1760B Aircraft Station Interfaces
SAE AS47642A-2007 Validation Methods for MIL-STD-1760C Aircraft Station Interfaces

SAE - SAE International, Proficiency testing method validation

SAE AS6088-2019 Verification Methods for AS5653 Network Terminal
SAE AS6089-2017 Verification Methods for AS5653 Network Controller
SAE AS4270A-2017 Validation Methods for MIL-STD-1760 Mission Stores
SAE AS47642-2004 Validation Methods for MIL-STD-1760C Aircraft Station Interfaces
SAE AS4764A-2017 Validation Methods for MIL-STD-1760 Aircraft Station Interfaces
SAE AS47641A-2017 Validation Methods for MIL-STD-1760B Aircraft Station Interfaces
SAE AS47642B-2017 Validation Methods for MIL-STD-1760C Aircraft Station Interfaces
SAE AS47643-2017 Verification Methods for MIL-STD-1760E Aircraft Station Interfaces

American Society of Quality Control （ASQC), Proficiency testing method validation

ASQ D61070-1997 Compliance Test Procedures for Steady-State Availability (T82E)

AT-ON, Proficiency testing method validation

OENORM EN ISO 16140-3:2021 Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021)
OENORM EN ISO 16140-4:2021 Microbiology of the food chain - Method validation - Part 4: Protocol for method validation in a single laboratory (ISO 16140-4:2020)
ONR CEN/TS 17329-1-2021 Foodstuffs - General guidelines for the validation of qualitative real-time PCR methods - Part 1: Single-laboratory validation
OENORM EN ISO 16140-5:2021 Microbiology of the food chain - Method validation - Part 5: Protocol for factorial interlaboratory validation for non-proprietary methods (ISO 16140-5:2020)
OENORM EN 17656-2021 Stationary source emissions - Requirements on proficiency testing schemes for emission measurements

CH-SNV, Proficiency testing method validation

SN EN ISO 16140-3:2021 Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021)
SN EN ISO 16140-4:2021 Microbiology of the food chain - Method validation - Part 4: Protocol for method validation in a single laboratory (ISO 16140-4:2020)
SN EN ISO 16140-5:2021 Microbiology of the food chain - Method validation - Part 5: Protocol for factorial interlaboratory validation for non-proprietary methods (ISO 16140-5:2020)

Lithuanian Standards Office , Proficiency testing method validation

LST EN ISO 16140-3:2021 Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021)
LST EN ISO 16140-4:2020 Microbiology of the food chain - Method validation - Part 4: Protocol for method validation in a single laboratory (ISO 16140-4:2020)
LST EN ISO/IEC 17043:2010 Conformity assessment - General requirements for proficiency testing (ISO/IEC 17043:2010)
LST CEN/TS 17329-1-2021 Foodstuffs - General guidelines for the validation of qualitative real-time PCR methods - Part 1: Single-laboratory validation
LST CEN/TS 16800-2021 Guideline for the validation of physico-chemical analytical methods
LST EN ISO 16140-5:2020 Microbiology of the food chain - Method validation - Part 5: Protocol for factorial interlaboratory validation for non-proprietary methods (ISO 16140-5:2020)
LST EN 15830-2012 Rough-terrain variable reach trucks - Visibility - Test methods and verification

PL-PKN, Proficiency testing method validation

PN-EN ISO 16140-3-2021-07 E Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021)
PN-EN ISO 16140-4-2021-01 E Microbiology of the food chain - Method validation - Part 4: Protocol for method validation in a single laboratory (ISO 16140-4:2020)
PN E04160 ArkusZ05-1973 Electric caibles Methods of testing Verification of the ?uality of the silvering
PN-EN ISO 16140-5-2021-01 E Microbiology of the food chain - Method validation - Part 5: Protocol for factorial interlaboratory validation for nonproprietary methods (ISO 16140-5:2020)
PN-EN 16842-10-2021-01 E Powered industrial trucks -- Visibility -- Test methods and verification -- Part 10: Towing and Pushing tractors and Burden carrier

Standard Association of Australia （SAA）, Proficiency testing method validation

AS 16140.3:2022 Microbiology of the food chain — Method validation, Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021, MOD)
AS/NZS 4490:2011

国家质量监督检验检疫总局, Proficiency testing method validation

SN/T 4754-2017 Technical requirements for chemical testing proficiency verification in entry-exit laboratories

Professional Standard - Machinery, Proficiency testing method validation

JB/T 7046-2006 Hydraulic fluid power Accumulators Verify methods of rated fatigue pressure and rated static pressure of pressure-containing envelopes
JB/T 7046-1993 Verification method of rated fatigue pressure and rated static pressure of pressure chamber of hydraulic accumulator
JB/T 5924-1991 Verification method of rated fatigue pressure and static pressure of pressure cavity of hydraulic component

National Electrical Manufacturers Association（NEMA), Proficiency testing method validation

NEMA PE 1-2003 Uninterruptible Power Systems (UPS) - Specification and Performance Verification

Japanese Industrial Standards Committee (JISC), Proficiency testing method validation

JIS A 5362:2001 Precast concrete products -- Required performance and methods of verification
JIS A 5362:2004 Precast concrete products -- Required performance and methods of verification
JIS A 5362:2010 Precast concrete products -- Required performance and methods of verification
JIS A 5362:2016 Precast concrete products -- Required performance and methods of verification
JIS B 7556:2003 Proving methods and procedures for gas flowmeters

国家认证认可监督管理委员会, Proficiency testing method validation

RB/T 146-2018 Implementation Guide for Mechanical Performance Capability Verification of Metal Products Used in Construction Engineering
RB/T 145-2018 Implementation Guide for Solid Strength Capability Testing of Concrete Structures

司法部, Proficiency testing method validation

SF/T 0063-2020 General principles for validation of forensic toxicological analysis methods

Professional Standard-Ships, Proficiency testing method validation

CB 20072-2012 Test method of sea trial for verifying torpedo guidance law

AENOR, Proficiency testing method validation

UNE-EN ISO/IEC 17043:2010 Conformity assessment - General requirements for proficiency testing (ISO/IEC 17043:2010)
UNE-EN 15830:2012 Rough-terrain variable reach trucks - Visibility - Test methods and verification

GOSTR, Proficiency testing method validation

GOST 17215-1971 Micrometric hole gauges. Methods and means of verification

CEN - European Committee for Standardization, Proficiency testing method validation

ENV ISO 13843:2001 Water Quality - Guidance on Validation of Microbiological Methods
PD CEN/TS 17329-1:2019 Foodstuffs - General guidelines for the validation of qualitative real-time PCR methods - Part 1: Single-laboratory validation

IT-UNI, Proficiency testing method validation

UNI CEN/TS 17329-1-2021 Foodstuffs - General guidelines for the validation of qualitative real-time PCR methods - Part 1: Single-laboratory validation
UNI CEN/TS 16800-2021 Guideline for the validation of physico-chemical analytical methods

(U.S.) Telecommunications Industries Association , Proficiency testing method validation

TIA-455-31-C-1994 FOTP-31 Proof Testing Optical Fibers by Tension

Shanxi Provincial Standard of the People's Republic of China, Proficiency testing method validation

DB14/T 2798-2023 Specification for verification of chemical analysis methods in testing laboratories
DB1404/T 18-2021 Inspection and testing laboratory instrument analysis method validation requirements Spectroscopy
DB1404/T 17-2021 Inspection and testing laboratory instrument analytical method validation requirements chromatography

Military Standard of the People's Republic of China-General Armament Department, Proficiency testing method validation

GJB 9916-2021 Aeroengine thermal barrier coating test verification method

The American Road & Transportation Builders Association, Proficiency testing method validation

AASHTO T67-2000 Standard Method of Test for Standard Practices for Force Verification of Testing Machine Twentieth Edition; ASTM E4-98a

International Electrotechnical Commission (IEC), Proficiency testing method validation

IEC 60953-3:2001 Rules for steam turbine thermal acceptance tests - Part 3: Thermal performance verification tests of retrofitted steam turbines

GM North America, Proficiency testing method validation

GM GMN7152-2002 Specification and Verification of Tensile and Fatigue Properties in Cast Components

IETF - Internet Engineering Task Force, Proficiency testing method validation

RFC 1961-1996 GSS-API Authentication Method for SOCKS Version 5

NEMA - National Electrical Manufacturers Association, Proficiency testing method validation

NEMA LSD 63-2012 Measurement Methods and Performance Variation for Verification Testing of General Purpose Lamps and Systems

机械工业部, Proficiency testing method validation

JB/T 7045-1993 Verification method for rated fatigue pressure and rated static pressure of hydraulic valve pressure chamber

Professional Standard - Aerospace, Proficiency testing method validation

QJ 1512-1988 Reliability Verification Test Method for Silicon Low Power NPN Transistor

RO-ASRO, Proficiency testing method validation

STAS SR ISO 2605-2:1995 Steel products for pressure purposes-Derivation and verification of elevated temperature properties Part 2: Proof stress of austenitic steel products

NL-NEN, Proficiency testing method validation

NEN 3365-1969 Jerrycans of PE for gasoline, 5 I

American Society of Mechanical Engineers (ASME), Proficiency testing method validation

ASME STP-PT-022-2008 COMPARISON AND VALIDATION OF CREEP-BUCKLING ANALYSIS METHODS

ANSI - American National Standards Institute, Proficiency testing method validation

INCITS/ISO/IEC 10373-2:1998 Identification cards - Test methods - Part 2: Cards with magnetic stripes

Professional Standard - Agriculture, Proficiency testing method validation

SN/T 5490-2023 Guidelines for Method Validation of Customs Technical Specifications

国家食品药品监督管理局, Proficiency testing method validation

YY/T 1495-2016 Microbial verification method for cleaning and disinfection effectiveness