ZH
RU
ES

Principle of Spectroscopic Analysis

Principle of Spectroscopic Analysis, Total:500 items.

In the international standard classification, Principle of Spectroscopic Analysis involves: Vocabularies, Analytical chemistry, Non-ferrous metals, Education, Water quality, Woodworking equipment, Standardization. General rules, Ferrous metals, Metalliferous minerals, Optics and optical measurements, Testing of metals, Fuels, Test conditions and procedures in general, Fibre optic communications, Non-metalliferous minerals, Products of non-ferrous metals, Powder metallurgy, Coals, Paints and varnishes, Paint ingredients, Particle size analysis. Sieving, Ferroalloys, Iron and steel products, Electronic components in general, Information sciences. Publishing, Non-destructive testing, Geology. Meteorology. Hydrology, Corrosion of metals, Refractories, Fertilizers, Products of the chemical industry, Air quality, Glass, Construction materials, Natural gas, Special measuring equipment for use in telecommunications, Animal feeding stuffs, Petroleum products in general, Environmental protection.

German Institute for Standardization, Principle of Spectroscopic Analysis

DIN 51009:2013-11 Optical atomic spectral analysis - Principles and definitions
DIN 51009:2013 Optical atomic spectral analysis - Principles and definitions
DIN 51009:2001 Optical atomic spectral analysis - Principles and definitions
DIN 55673:2000 Paints, varnishes and their raw materials - Analysis by near infrared spectrometry - General working principles
DIN 55673:2017 Paints, varnishes and their raw materials - Analysis by near infrared spectrometry - General working principles
DIN 55673:2017-04 Paints, varnishes and their raw materials - Analysis by near infrared spectrometry - General working principles
DIN ISO 13321:2004 Particle size analysis - Photon correlation spectroscopy (ISO 13321:1996)
DIN 51418-1:1996 X-ray spectrometry - X-ray emission- and X-ray fluorescence analysis (XRF) - Part 1: Definitions and basic principles
DIN 51418-1:2008-08 X-ray spectrometry - X-ray emission- and X-ray fluorescence analysis (XRF) - Part 1: Definitions and basic principles
DIN 51451:2020-02 Testing of petroleum products and related products - Analysis by infrared spectrometry - General working principles
DIN EN 62129:2007 Calibration of optical spectrum analyzers (IEC 62129:2006); German version EN 62129:2006
DIN EN ISO 10700:1996 Steel and iron - Determination of manganese content - Flame atomic absorption spectrometric method (ISO 10700:1994); German version EN ISO 10700:1995
DIN 51451:2004 Testing of petroleum products and related products - Analysis by infrared spectrometry - General working principles
DIN 51451:2020 Testing of petroleum products and related products - Analysis by infrared spectrometry - General working principles
DIN EN ISO 26845:2008-06 Chemical analysis of refractories - General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods (ISO 26845:2008); German version EN ISO 26845:2008
DIN 51418-1:2008 X-ray spectrometry - X-ray emission- and X-ray fluorescence analysis (XRF) - Part 1: Definitions and basic principles
DIN V ENV 13800:2000 Lead and lead alloys - Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES) without separation of the lead matrix; German version ENV 13800:2000
DIN V ENV 14029:2001 Lead and lead alloys - Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES), after separation of the lead matrix; German version ENV 14029:2001

Taiwan Provincial Standard of the People's Republic of China, Principle of Spectroscopic Analysis

CNS 14896-14-2005 Titanium - Method for atomic emission spectrometric analysis
CNS 12416-2006 General rules for atomic emission spectrometry
CNS 14896.14-2005 Titanium - Method for atomic emission spectrometric analysis
CNS 11209-1995 General Rules for Chemical Analysis by Atomic Absorption Spectrophotometry
CNS 12126-1987 Method of Chemical Analysis by Atomic Absorption Spectrophotometry for Copper and Copper Alloys
CNS 14341-1999 Optical spectrum analyzer
CNS 11206-2002 Iron and steel─Methods for atomic absorption spectrometric analysis
CNS 12416-1988 Genenral Rules for Emission Spectroscopic Analysis
CNS 12013-1987 Method of Test for Lead in Gasoline by Atomic Absorption Spectrometry
CNS 10006-1984 Method for Photoelectric Emission Spectrochemical Analysis of Iron And Steel
CNS 9705-1984 General Rules for Emission-Spectroscopic Analysis of Iron and Steel
CNS 10503-1984 Emission-Spectroscopic Analysis for Pig Iron and Cast Iron
CNS 9706-1984 General Rules for Photoelectric Emission Spectrochemical Analysis of Iron and Steel
CNS 13921-1997 Method of atomic emission spectrophotoelectric analysis for die casting zinc alloy
CNS 10005-1984 General Rules for Photoelectric Emission Spectrochemical Analysis of Metallic Materials
CNS 13388-1994 Methods for Inductively Coupled Plasma Emission Spectrochemical Analysis of Steel
CNS 11071-1984 Emission-Spectroscopic Analysis for Carbon Steel and Low Alloy Steel

Professional Standard - Education, Principle of Spectroscopic Analysis

JY/T 0566-2020 General rules for atomic fluorescence spectrometry
JY/T 0571-2020 General Rules of Fluorescence Spectroscopy Analysis Methods
JY/T 0565-2020 General rules for electrothermal atomic absorption spectrometry
JY/T 0573-2020 General Rules of Laser Raman Spectroscopy Analysis Method
JY/T 002-1996 General Rules for Laser Raman Spectroscopy Analysis Methods
JY/T 0572-2020 General Rules for Analytical Methods of Circular Dichroism Spectroscopy

Indonesia Standards, Principle of Spectroscopic Analysis

SNI 06-6596-2001 Water treatment for metal analysis by atomic absorption spectrophotometers
SNI 13-4694-1998 Composition analysis of coal ash by atomic absorption spectrometry
SNI 13-6180-1999 Procedure for optimization of flame Atomic Absorption Spectrophotometer (AAS)

RU-GOST R, Principle of Spectroscopic Analysis

GOST 17261-2008 Zinc. Methods of atomic-emission spectral analysis
GOST 27981.1-1988 Copper of high purity. Methods of atomic-spectral analysis
GOST 27981.1-2015 High purity copper. Method of atomic-spectral analysis
GOST R 54153-2010 Steel. Method of atomic emission spectral analysis
GOST 6012-2011 Nickel. Methods of chemical-atomic-emission spectral analysis
GOST 8776-2010 Cobalt. Methods of chemical-atomic-emission spectral analysis
GOST 6012-1978 Nickel. Methods of chemical-atomic-emission spectral analysis
GOST 8776-1999 Cobalt. Methods of chemical-atomic-emission spectral analysis
GOST 16274.8-1977 Bismuth. Spectral methods of analysis
GOST 14339.5-1991 Tungsten. Methods of spectral analysis
GOST 8857-1977 Lead. Method of spectral analysis
GOST 12223.0-1976 Iridium. Method of spectral analysis
GOST 12227.0-1976 Rodium. Method of spectral analysis
GOST 14316-1991 Molybdenum. Spectrum analysis methods
GOST 8776-1979 Cobalt. Methods of chemical-atomic-emission spectral analysis
GOST 18895-1997 Steel. Method of photoelectric spectral analysis
GOST 17261-1977 Zinc. Spectral method of analysis
GOST 15483.10-2004 Tin. Methods of atomic-emission spectral analysis
GOST 3221-1985 Primary aluminium. Methods of spectral analysis
GOST 12228.1-1978 Ruthenium. Method of spectral analysis
GOST 17818.15-1990 Graphite. Method of spectrum analysis
GOST 22397-1977 Zinc powder. Method of spectral analysis
GOST 27611-1988 Cast iron. Photoelectrical sspeciral method of analisis
GOST 18895-1981 Steel. Method of photoelectric spectral analysis
GOST 15483.10-1978 Tin. Spectral methods for determination of bismuth, iron, copper, arsenic, lead, antimony, zinc and aluminium
GOST 9519.3-1977 Lead-calcium bearing alloys. Method of atomic-absorbing spectral analysis
GOST 23328-1995 Zinc alloys. Methods of spectral analysis
GOST 1367.1-1983 Antimony. Spectral method for the determination of impurities without preliminary concentration
GOST 1367.11-1983 Antimony. Chemical-spectral method of analysis
GOST 7727-1981 Aluminium alloys. Methods of spectral analysis
GOST 7728-1979 Magnesium alloys. Methods of spectral analysis
GOST 12224.1-1978 Osmimum. Chemical-spectral method of analysis
GOST 13348-1974 Antimonous antimonides. Method of spectral analysis
GOST 23902-1979 Titanium alloys. Methods of spectral analysis
GOST 7.28-1980 System of standards "information, libraries and publishing". Representation of extended Latin alphabet for information interchange on magnetic tapes
GOST 23328-1978 Zinc antifriction alloys. Methods of spectral analysis
GOST 9717.2-1982 Copper. Method of spectral analysis of metal standart specimens with photographic registration of spectrum
GOST 30082-1993 Zinc-aluminium alloys. Spectral method of analysis
GOST 27809-1995 Cast iron and steel. Methods of spectrographic analysis
GOST 9816.4-1984 Technical tellurium. Method of spectral analysis
GOST 12551.2-1982 Alloys platinum-copper. Methods of spectral analysis
GOST 12553.2-1977 Platinum-palladium alloys. Method of spectral of analysis
GOST 12554.2-1983 Platinum-ruthenium alloys. Method of spectral analysis
GOST 12555.2-1983 Silver-platinum alloys. Method of spectral analysis
GOST 12556.2-1982 Alloys platinum-rhodium. Methods of spectral analysis
GOST 12558.2-1978 Palladium-silver alloys. Method of spectral of analysis
GOST 12562.2-1982 Alloys gold-platinum. Methods of spectral analysis
GOST 12563.2-1983 Gold-palladium alloys. Method of spectral analysis
GOST 16321.2-1970 Silver-copper alloys. Method of spectral analysis
GOST 16273.1-1985 Technical selenium. Method of spectral analysis
GOST 27809-1988 Steel and cast iron. Methods of spectropgapnic analysis
GOST R 55080-2012 Cast iron. Method of X-ray fluorescence (XRF) analysis
GOST R ISO 20552-2011 Workplace air. Determination of mercury vapour. Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry
GOST 16274.1-1977 Bismuth. Method of spectrochemical analysis
GOST 12550.2-1982 Palladium-iridium alloys. Methods of spectrografic analysis
GOST 12552.2-1977 Platinum-nickel alloys. Method of spectral of analysis
GOST 12559.2-1982 Rlatinum-iridium alloys. Methods of spectrografic analysis
GOST 12560.2-1978 Palladium-silver-cobalt alloys. Method of spectral analysis
GOST 12561.2-1978 Palladium-silver-copper alloys. Method of spectral analysis
GOST 12564.2-1983 Aurrum-palladium-platinum alloys. Method of spectral analysis
GOST 25567-1982 Concentrated kaolin. Spectrum analysis method
GOST 20997.0-1981 Thallium. General requirements for methods of spectral analysis
GOST 31870-2012 Drinking water. Determination of elements content by atomic spectrometry methods
GOST 33405-2015 Testing of chemicals of environmental hazard. Determination of the UV-VIS absorption spectral by spectrophotometric method

Korean Agency for Technology and Standards (KATS), Principle of Spectroscopic Analysis

KS D 2553-2015 Tantalum－Method for atomic absorption spectrometric analysis
KS D 2568-2008 Tantalum－Method for atomic absorption spectrometric analysis
KS D 2553-2015(2020) Tantalum－Method for atomic absorption spectrometric analysis
KS E 3030-2007(2012) Atomic absorption spectrochemical analysis for iron ores
KS D 2568-2019 Tantalum－Method for atomic absorption spectrometric analysis
KS E 3030-1982 Atomic absorption spectrochemical analysis for iron ores
KS D 1659-2008 Methods for atomic absorption spectrophotometric analysis of iron and steel
KS M 0016-1995 General rules for atomic absorption spectrochemical analysis
KS M 0016-2010(2020) General rules for atomic absorption spectrochemical analysis
KS D 2086-2019 Methods for atomic emission spectrometric analysis of titanium
KS M ISO 6955-2016(2021) Analytical spectroscopic methods－Flame emission,atomic absorption, and atomic fluorescence－Vocabulary
KS M ISO 6955:2016 Analytical spectroscopic methods－Flame emission,atomic absorption, and atomic fluorescence－Vocabulary
KS M 0028-2009(2019) General rules for light emission spectrochemical analysis
KS D 1679-1993 Methods for atomic absorption spectrometric analysis of aluminium and aluminium alloys
KS D 1652-2007 Iron and steel-Method for spark discharge atomic emission spectrometric analysis
KS D 1679-2008 Methods for atomic absorption spectrometric analysis of aluminium and aluminium alloys
KS D 1652-2022 Iron and steel — Method for spark discharge atomic emission spectrometric analysis
KS D 1652-2007(2017) Iron and steel－Method for spark discharge atomic emission spectrometric analysis
KS D 2086-2004 Method for atomic emission spectrometric analysis of titanium
KS D 2518-2005 Methods for photoelectric emission spectrochemical analysis of cadmium metal
KS C 6918-1995 Test methods of fiber-optic spectrum analyzer
KS D ISO 3815-2002(2006) Zinc and zinc alloys－Spectrographic analysis
KS D 2518-1982 Methods for photoelectric emission spectrochemical analysis of cadmium metal
KS D 1681-2003 Method for emission spectrochemica1 analysis of aluminium ingot
KS D 1684-2008 Methods for emission spectrographic analysis of magnesium ingot
KS D 1682-2008 Methods for emission spectrochemical analysis of lead ingot
KS L ISO 26845-2012(2022) Chemical analysis of refractories－General requirements for wet chemical analysis, atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry methods
KS L ISO 26845-2012(2017) Chemical analysis of refractories－General requirements for wet chemical analysis, atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry methods
KS D 1654-1993 General Rules for X-ray Fluorescence Spectrometric Analysis of Iron and Steel
KS D 1682-2020 Method for photoelectric emission spectrochemical analysis of lead metal
KS D 1654-2003(2016) General rules for X-ray fluorescence spectrometric analysis of iron and steel
KS D 2710-2019 Methods for X-ray fluorescence spectrometric analysis of ferroniobium
KS M ISO 78-4-2010(2020) Layouts for standards－Part 4：Standard for atomic absorption spectrometric analysis
KS I ISO 20552:2021 Workplace air — Determination of mercury vapour —Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry
KS I ISO 20552:2010 Workplace air－Determination of mercury vapour－Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry
KS D ISO 3815:2011 Zinc and zinc alloys－Spectrographic analysis
KS D 2558-1995 Method for emission spectrographic analysis of tantalum
KS D 1684-1993 Methods for emission spectrographic analysis of magnesium ingot
KS D 1682-1993 Methods for emission spectrochemical analysis of lead ingot
KS D 1684-1985 Methods for emission spectrographic analysis of magnesium ingot
KS D 2518-2015 Methods for photoelectric emission spectrochemical analysis of cadmium metal
KS D 1655-1993 Method for X-Ray Fluorescence Spectrometric Analysis of Iron and Steel
KS M 0017-1995 General rules for X-ray fluorescence spectrometric analysis
KS D 1898-2019 Copper alloys —Methods for X-ray fluorescence spectrometric analysis
KS I ISO 20552-2010(2016) Workplace air - Determination of mercury vapour - Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry
KS L 3316-2014 Method for X-ray fluorescence spectrometric analysis of refractory products
KS D 1686-2011(2021) Method for x-ray fluorescence spectrometric analysis of ferroalloys
KS L 3316-2014(2019) Method for X-ray fluorescence spectrometric analysis of refractory products
KS D 2518-2015(2020) Methods for photoelectric emission spectrochemical analysis of cadmium metal
KS L 3316-1998 Method for X-ray fluorescence spectrometric analysis of refractory products
KS L 3316-1988 Method for X-ray fluorescence spectrometric analysis of refractory products
KS L ISO 26845:2012 Chemical analysis of refractories-General requirements for wet chemical analysis, atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry methods
KS M ISO 78-4:2010 Layouts for standards－Part 4：Standard for atomic absorption spectrometric analysis
KS D 2569-2005 Methods for ICP emission spectrometric analysis of tantalum
KS D 2569-2016 Methods for ICP emission spectrometric analysis of tantalum
KS D 2569-2016(2021) Methods for ICP emission spectrometric analysis of tantalum
KS D ISO 10700:2008 Steel and iron-Determination of manganese content-Flame atomic absorption spectrometric method
KS D 1658-2003 Emission-spectroscopic analysis for carbon steel and low alloy steel
KS D ISO 9647:2002 Steel and iron?Determination of vanadium content — Flame atomic absorption spectrometric method
KS D 1679-2020 Methods for atomic absorption spectrometric analysis of aluminium and aluminium alloys
KS D 2044-2005(2015) Determination of lead magnesium and magnesium alloys－Atomic absorption spectrometry
KS D 1650-1993 General rules for photoelectric emission spectrochemical analysis of metal materials
KS I 20552-2010 Workplace air-Determination of mercury vapour-Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry
KS E ISO 315-2011(2021) Manganese ores and concentrates－Determination of nickel content－Dimethylglyoxime spectrometric method and flame atomic absorption spectrometric method
KS D 1680-2008 General rules for photographic emission spectrochemical analysis of metal materials

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Principle of Spectroscopic Analysis

GB/T 15337-1994 General rules for atomic absorption spectrometric analysis
GB/T 15337-2008 General rules for atomic absorption spectrometric analysis
GB/T 4470-1998 Analytical spectroscopic methods-Flame emission,atomic absorption and atomic fluorescence-Vocabulary
GB/T 12689.9-2004 The methods for chemical analysis of zinc and zinc alloys-The determination of antimony content-The atomic fluorescence spectrometer and the flame atomic absorption spectrometric method
GB/T 19627-2005 Particle size analysis-Photon correlation spectroscopy
GB/T 14203-2016 General rules for spark discharge atomic emission spectrometry
GB/T 5123-1985 Nickel--Method of spectral analysis
GB/T 5871-1986 Method for spectrographic analysis of aluminium and its alloys
GB/T 25481-2010 On-line ultraviolet/visible spectrum analyzer
GB/T 8151.15-2005 Methods for chemical analysis of zinc concentrates-Determination of mercury content-Atomic fluorescence spectrometry method
GB/T 8152.11-2006 Methods for chemical analysis of lead concentrates. Determination of mercury content. Atomic fluorescence spectrometer method
GB/T 8152.5-2006 Methods for chemical analysis of lead concentrates. Determination of arsenic content. Atomic fluorescence spectrometer method
GB/T 6150.10-2023 Methods of chemical analysis of tungsten concentrates - Part 10: Determination of lead content by hydride generation atomic fluorescence spectrometry and flame atomic absorption spectrometry
GB/T 6150.15-2023 Methods for chemical analysis of tungsten concentrates - Part 15: Determination of bismuth content by hydride generation atomic fluorescence spectrometry and flame atomic absorption spectrometry
GB/T 4325.3-2013 Methods for chemical analysis of molybdenum.Part 3:Determination of bismuth content.Atomic fluorescence spectrometry
GB/T 4325.4-2013 Methods for chemical analysis of molybdenum.Part 4:Determination of tin content.Atomic fluorescence spectrometry
GB/T 4325.5-2013 Methods for chemical analysis of molybdenum.Part 5:Determination of antimony content.Atomic fluorescence spectrometry
GB/T 4325.6-2013 Methods for chemical analysis of molybdenum.Part 6:Determination of arsenic content.Atomic fluorescence spectrometry
GB/T 16599-1996 Methods for emission spectrum analysis of molybdenum
GB/T 16600-1996 Methods for emission spectrum analysis of tungsten
GB/T 9259-1988 Terminology of emission spectochemical analysis
GB/T 6040-2002 General rules for infrared analysis
GB/T 11170-1989 Method for photoelectric emission spectroscopic analysis of stainless steel
GB/T 29559-2013 Surface chemical analysis.Analysis of zinc and/or aluminium based metallic coatings by glow discharge optical emission spectrometry
GB/T 12689.2-2004 The methods for chemical analysis of zinc and zinc alloys-The determination of arsenic content-The atomic fluorescence spectrometer method
GB/T 4324.15-2008 Methods for chemical analysis of tungsten.Determination of magnesium content.The flame atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry
GB/T 7999-2000 Standard method for direct reading spectromertric analysis of aluminum and its alloys
GB/T 7728-1987 Chemical analysis of metallurgical products--General rule for flame atomic absorption spectrometric methods
GB/T 4333.8-1988 Methods for chemical analysis of ferrosilicon--The atomic absorption spectrometric method for the determination of calcium content
GB 7728-1987 General rules for flame atomic absorption spectrometry for chemical analysis of metallurgical products
GB/T 42360-2023 Total Reflection X-ray Fluorescence Spectroscopic Analysis of Water for Surface Chemical Analysis
GB/T 14849.10-2016 Methods for chemical analysis of industrial silicon - Part 10: Determination of mercury content by atomic fluorescence spectrometry
GB/T 6150.17-2022 Methods for chemical analysis of tungsten concentrates—Part 17：Determination of antimony content—Atomic fluorescence spectrometry
GB/T 4324.9-2012 Methods for chemical analysis of tungsten.Part 9:Determination of cadmium content.Inductively-coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry
GB/T 6150.13-2022 Methods for chemical analysis of tungsten concentrates—Part 13：Determination of arsenic content—Atomic fluorescence spectrometry and the silver diethyldithiocarbamate（DDTC-Ag）spectrophotometry
GB/T 3253.6-2008 Methods for chemical analysis of antimony and antimony trioxide.Determination of selenium content.Atomic fluorenscence spectrophotometric method
GB/T 3253.10-2009 Methods for chemical analysis of antimony and antimony trioxide.Determination of mercury content.Atomic fluorescence spectrometric method
GB/T 3253.7-2009 Methods for chemical analysis of antimony and antimony trioxide.Determination of bismuth content.Atomic fluorescence spectrometric method
GB/T 14203-1993 General rule for photoelectric emission spectroscopic analysis of iron, steel and alloy
GB/T 26042-2010 Methods for analysis of zinc and zinc alloys.The optical emission spectrometry
GB/T 8220.6-1998 Methods for chemical analysis of bismuth--Determination of lead content--Electrothermal atomic absorption spectrometric method
GB/T 8220.12-1998 Methods for chemical analysis of bismuth--Determination of nickel content--Electrothermal atomic absorption spectrometric method
GB/T 8220.4-1998 Methods for chemical analysis of bismuth--Determination of silver content--Flame atomic absorption spectrophotometric method
GB/T 11066.2-1989 Gold--Determination of silver content--Flame atomic absorption spectometric method
GB/T 11066.3-1989 Gold--Determination of iron content--Flame atomic absorption spectrometric method
GB/T 23364.1-2009 Methods for chemical analysis of high purity indium oxide.Part 1:Determination of arsenic content.Atomic fluorescence spectrometry

Japanese Industrial Standards Committee (JISC), Principle of Spectroscopic Analysis

JIS H 1630:1995 Method for atomic emission spectrometric analysis of titanium
JIS H 1683:2002 Tantalum -- Method for atomic absorption spectrometric analysis
JIS H 1630:1975 Method for atomic emission spectrometric analysis of titanium
JIS G 1257:1994 Iron and steel -- Methods for atomic absorption spectrometric analysis
JIS H 1306:1992 Methods for atomic absorption spectrometric analysis of aluminium and aluminium alloys
JIS G 1257 AMD 2:2000 Iron and steel -- Methods for atomic absorption spectrometric analysis (Amendment 2)
JIS G 1253:2002 Iron and steel -- Method for spark discharge atomic emission spectrometric analysis
JIS C 6192:2008 Calibration of optical spectrum analyzers
JIS G 1256:1997 Iron and steel -- Method for X-ray fluorescence spectrometric analysis
JIS H 1291:1977 Method for atomic absorption spectrochemical analysis of copper and copper alloys
JIS H 1306:1999 Methods for atomic absorption spectrometric analysis of aluminium and aluminium alloys
JIS G 1257 AMD 1:1999 Iron and steel -- Methods for atomic absorption spectrometric analysis (Amendment 1)
JIS K 0121:1993 General rules for atomic absorption spectrochemical analysis
JIS M 8205:2000 Iron ores -- X-ray fluorescence spectrometric analysis
JIS H 1123:2021 Method for photoelectric emission spectrochemical analysis of lead metal
JIS H 1691:1968 Method for spectrochemical analysis of tantalum
JIS H 1183:2007 Method for emission spectrochemical analysis of silver bullion
JIS H 1305:2005 Method for optical emission spectrochemical analysis of aluminium and aluminium alloys
JIS R 2216:2005 Methods for X-ray fluorescence spectrometric analysis of refractory products
JIS H 1123:1995 Method for photoelectric emission spectrochemical analysis of lead metal
JIS H 1631:2008 Titanium alloys -- Method for X-ray fluorescence spectrometric analysis
JIS G 1256 AMD 1:2010 Iron and steel -- Method for X-ray fluorescence spectrometric analysis (Amendment 1)
JIS G 1351:2006 Ferroalloys -- Method of X-ray fluorescence spectrometric analysis
JIS Z 8826:2005 Particle size analysis -- Photon correlation spectroscopy
JIS H 1288:2015 Nickel and nickel alloys -- Methods for spark discharge atomic emission spectrometric analysis
JIS H 1322:2017 Magnesium and magnesium alloys -- Method for spark discharge atomic emission spectrometric analysis
JIS G 1253 AMD 1:2013 Iron and steel.Method for spark discharge atomic emission spectrometric analysis (Amendment 1)
JIS H 1163:1991 Method for photoelectric emission spectrochemical analysis of cadmium metal
JIS H 1292:1997 Method for X-ray fluorescence spectrometric analysis of copper and copper alloys
JIS H 1287:2015 Nickel and nickel alloys -- Methods for X-ray fluorescence spectrometric analysis
JIS G 1256 AMD 2:2013 Iron and steel.Method for X-ray fluorescence spectrometric analysis (Amendment 2)
JIS H 1113:2022 Method for photoelectric emission spectrochemical analysis of zinc metal

RO-ASRO, Principle of Spectroscopic Analysis

STAS 1706/17-1971 CUPPER speelrochemical analysis
STAS 11464-1980 IRON AND STEEL Spectrochemical analysis
STAS 5177-1981 EMISSION SPECTROGRAPHICAL ANALYSIS Terminology

U.S. Air Force, Principle of Spectroscopic Analysis

AIR FORCE A-A-59684 A-2009 OPTICAL SPECTRUM ANALYZER
AIR FORCE A-A-59684-2004 OPTICAL SPECTRUM ANALYZER

BR-ABNT, Principle of Spectroscopic Analysis

ABNT P-EB-304-1969

ZA-SANS, Principle of Spectroscopic Analysis

SANS 5567:1968 Spectrographic analysis of copper
SANS 62129:2008 Calibration of optical spectrum analyzers

KR-KS, Principle of Spectroscopic Analysis

KS M ISO 6955-2016 Analytical spectroscopic methods－Flame emission,atomic absorption, and atomic fluorescence－Vocabulary
KS D 1652-2007(2017)(英文版) Iron and steel－Method for spark discharge atomic emission spectrometric analysis
KS I ISO 20552-2021 Workplace air — Determination of mercury vapour —Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry

工业和信息化部, Principle of Spectroscopic Analysis

YS/T 1171.8-2017 Methods for chemical analysis of recycled zinc raw materials Part 8: Determination of mercury content by atomic fluorescence spectrometry and cold atomic absorption spectrometry
YS/T 84-2020 Iridium matrix for spectroscopic analysis
YS/T 82-2020 Platinum matrix for spectroscopic analysis
YS/T 83-2020 Palladium matrix for spectroscopic analysis
YS/T 85-2020 Rhodium matrix for spectroscopic analysis
YS/T 445.10-2019 Methods of chemical analysis of silver concentrates Part 10: Determination of antimony content Hydride generation-atomic fluorescence spectrometry and flame atomic absorption spectrometry
YS/T 3015.6-2017 Methods for chemical analysis of gold-loaded carbon Part 6: Determination of mercury content Atomic fluorescence spectrometry and inductively coupled plasma atomic emission spectrometry
YS/T 3015.7-2017 Methods for chemical analysis of gold-loaded carbon Part 7: Determination of arsenic content Atomic fluorescence spectrometry and inductively coupled plasma atomic emission spectrometry
YS/T 1381-2020 Methods for chemical analysis of rhodium compounds - Determination of arsenic content Atomic fluorescence spectrometry
YS/T 1341.7-2019 Methods of chemical analysis of crude zinc Part 7: Determination of antimony content Atomic fluorescence spectrometry
YS/T 1341.8-2019 Methods of chemical analysis of crude zinc Part 8: Determination of tin content Atomic fluorescence spectrometry
YS/T 1341.6-2019 Methods of chemical analysis of crude zinc Part 6: Determination of arsenic content by atomic fluorescence spectrometry
YS/T 445.11-2019 Methods for chemical analysis of silver concentrates Part 11: Determination of bismuth content Hydride generation-atomic fluorescence spectrometry, flame atomic absorption spectrometry and Na2EDTA titration
YS/T 464-2019 Direct reading spectroscopic analysis method of copper cathode
YB/T 4144-2019 Establish and control atomic emission spectroscopy chemical analysis curve rules
YS/T 1171.7-2017 Methods for chemical analysis of recycled zinc raw materials Part 7: Determination of arsenic and antimony amounts Atomic fluorescence spectrometry
YS/T 445.13-2019 Methods of chemical analysis of silver concentrates Part 13: Determination of mercury content by atomic fluorescence spectrometry
YS/T 482-2022 Analysis methods for copper and copper alloys Spark discharge atomic emission spectrometry

Association Francaise de Normalisation, Principle of Spectroscopic Analysis

T01-040:1982 Analytical spectroscopic methods. Flame emission, atomic absorption and atomic fluorescence. Vocabulary.
NF C93-845:2006 Calibration of optical spectrum analyzers.
NF X11-672:1996 Particle size analysis. Photon correlation spectroscopy.
NF A06-840:1998 Zinc and zinc alloys. Optical emission spectrometric analysis.
NF U44-145:1984 FERTILIZERS AND SOILS CONDITIONERS. DETERMINATION OF MAGNESIUM BY ATOMIC ABSORPTION SPECTROMETRIC METHOD.
NF A06-590:2005 Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis.
NF A07-510X2:1975 ANALYSIS OF NON-ALLOYED ALUMINIUM BY EMISSION SPECTROGRAPHY.
NF A06-001:1979 Analysis of light metals by spectrography. Processing of test results. Statistical interpretation.
NF EN ISO 26845:2008 Analyse chimique des matériaux réfractaires - Exigences générales pour les méthodes d'analyse chimique par voie humide, par spectrométrie d'absorption atomique (AAS) et par spectrométrie d'émission atomique avec plasma induit par haute fréq...
NF A07-510:1971 Analysis of non-alloyed aluminium by emission spectrography.
NF A07-515:1971 Analysis of aluminium copper alloys by emission spectrography.
NF A22-402:1979 Chemical analysis of manganese ores. Determination of iron. Atomic absorption spectrometric method.
NF B40-672*NF EN ISO 26845:2008 Chemical analysis of refractories . General requirements for wet chemicals analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods
NF ISO 7530-9:2007 Alliages de nickel - Analyse par spectrométrie d'absorption atomique dans la flamme - Partie 9 : dosage du vanadium
NF A22-401:1977 Chemical analysis of manganese ores. Determination of copper, zinc and lead. Atomic absorption spectrometric method.
NF A08-344:1996 Steel and iron. Determination of vanadium content. Flame atomic absorption spectrometric method.
NF X21-061:2008 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Determination of lateral resolution.

Group Standards of the People's Republic of China, Principle of Spectroscopic Analysis

T/CSTM 00964-2022 General rules for performance evaluation of atomic spectrometer
T/CSTM 00011E-2021 General rules for original position statistic distribution analysis by laser induced breakdown spectroscopy
T/CSTM 00011-2017 General Rules for In Situ Statistical Distribution Analysis Method of Laser Induced Breakdown Spectroscopy
T/QAS 082.10-2023 Chemical Analysis of Rock Salt and Glauber's Salt - Part 10: Determination of Arsenic by Atomic Fluorescence Spectrometry

European Committee for Standardization (CEN), Principle of Spectroscopic Analysis

CEN EN 62129-2006 Calibration of optical spectrum analyzers
CEN EN 62129-2006_ Calibration of optical spectrum analyzers
EN 14726:2005 Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis
PREN 14726-2003 Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis
EN 12019:1997 Zinc and Zinc Alloys - Optical Emission Spectrometric Analysis
CEN EN 14726-2005 Aluminium and aluminium alloys — Chemical analysis — Guideline for spark optical emission spectrometric analysis

Professional Standard - Chemical Industry, Principle of Spectroscopic Analysis

HG/T 2954~2955-2008 Standard writing format for atomic absorption spectroscopic analysis method Standard writing format for molecular absorption spectroscopic analysis method
HG/T 2954-2008 Layouts for standard of atomic absorption spectrometric analysis
HG/T 2954-1985(1997) Layouts of standard of atomic absorption spectrometric analysis for chemical products

Professional Standard - Non-ferrous Metal, Principle of Spectroscopic Analysis

YS/T 536.7-2009 Methods for chemical analysis of bismuth.Determination of arsenic content.Atomic fluorescence spectrometric method
YS/T 536.11-2009 Methods for chemical analysis of bismuth.Determination of mercury content.Atomic fluorescence spectrometric method
YS/T 536.4-2009 Methods for chemical analysis of bismuth.Determination of silver content.Flame atomic absorption spectrophotmetric method and electrothermal atomic absorption spectrometric method
YS/T 82-2006 Basis platinum as spectral analysis
YS/T 83-2006 Basis palladium as spectral analysis
YS/T 84-2006 Basis iridum as spectral analysis
YS/T 85-2006 Basis rhodium as spectral analysis
YS/T 82-1994 Platinum substrates for spectroscopic analysis
YS/T 83-1994 Palladium Matrix for Spectroscopic Analysis
YS/T 84-1994 Iridium matrix for spectroscopic analysis
YS/T 85-1994 Rhodium Matrix for Spectroscopic Analysis
YS/T 1605.3-2023 Methods for chemical analysis of roasted molybdenum concentrate— Part 3: Determination of bismuth content— Flame atomic absorption spectrometry and atomic fluorescence spectrometry
YS/T 631-2007 Methods for analysis of zinc.The optical emission spectrometry
YS/T 555.4-2009 Methods for chemical analysis of molybdenum concentrate.Determination of tin content.Atomic fluorescence spectrometry
YS/T 555.3-2009 Methods for chemical analysis of molybdenum concentrate.Determination of arsenic conten.Atomic fluorescence spectrometry
YS/T 872-2013 Methods for chemical analysis gallium.Determination of mercury in industrial gallium.Atomic fluorescence spectrometer method
YS/T 276.8-2011 Methods for chemical analysis of indium.Part 8:Determination of bismuth content.Method 1:Hydride generation-atomic fluorescence spectrometry.Method 2:Flame atomic absorption spectrometry
YS/T 558-2009 Methods for emission spectrum analysis of molybdenum
YS/T 559-2009 Methods for emission spectrum analysis of tungsten
YS/T 558-2006 Molybdenum Emission Spectroscopy Analysis Method
YS/T 559-2006 Tungsten Emission Spectroscopy Analysis Method
YS/T 710.4-2009 Method for chemical analysis of cobalt oxide.Part 4:Determination of arsenic content.Atomic fluorescence spectrometry
YS/T 556.7-2009 Methods for chemical analysis of antimony concentrates.Part 7:Determination of mercury content.Atomic fluorescence spectrometry
YS/T 229.2-2013 Methods for chemical analysis of high pure lead.Part 2:Determination of arsenic content.Atomic fluorescence spectrometry
YS/T 229.3-2013 Methods for chemical analysis of high pure lead.Part 3:Determination of antimony content.Atomic fluorescence spectrometry
YS/T 464-2003 Methods for analytical of copper cathode-The optical emission spectrometry
YS/T 74.10-1994 Methods of chemical analysis of cadmium-Flame atomic absorption spectrometry for determination of silver content
YS/T 276.5-2011 Methods for chemical analysis of indium.Part 5:Determination of iron content.Method 1:Graphite furnace atomic absorption spectrometry.Method 2:Flame atomic absorption spectrometry
YS/T 461.6-2003 The methods for chemical analysis of lead and zinc bulk concentrates-The determination of mercury content-The atomic fluorescence spectrometry method
YS/T 482-2005 Methods for analysis of copper and copper alloys-The atomic emission spectrometry
YS/T 74.4-1994 Methods for chemical analysis of cadmium - Determination of lead content by flame atomic absorption spectrometry
YS/T 74.6-1994 Methods for chemical analysis of cadmium - Determination of zinc content by flame atomic absorption spectrometry
YS/T 536.4-2006 Methods of chemical analysis of bismuth - Determination of silver content by flame atomic absorption spectrometry
YS/T 536.6-2006 Bismuth Chemical Analysis Method Electrothermal Atomic Absorption Spectrometry Determination of Lead
YS/T 536.12-2006 Bismuth Chemical Analysis Method Electrothermal Atomic Absorption Spectrometry Determination of Nickel Content

International Organization for Standardization (ISO), Principle of Spectroscopic Analysis

ISO 13321:1996 Particle size analysis - Photon correlation spectroscopy
ISO 3815:1976 Zinc and zinc alloys; Spectrographic analysis
ISO 20552:2007 Workplace air - Determination of mercury vapour - Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry
ISO 6955:1982 Analytical spectroscopic methods; Flame emission, atomic absorption, and atomic fluorescence; Vocabulary Bilingual edition
ISO 78-4:1983 Layouts for standards; Part 4: Standard for atomic absorption spectrometric analysis
ISO 26845:2008 Chemical analysis of refractories - General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods
ISO 18516:2006 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Determination of lateral resolution

Standard Association of Australia （SAA）, Principle of Spectroscopic Analysis

AS 4549.1:1999 Particle size analysis - Photon correlation spectroscopy
AS 2134.3:1994 Recommended practice for chemical analysis by atomic absorption spectrometry - Vapour generation atomic absorption spectrometry
AS 2134.2:1999 Recommended practice for chemical analysis by atomic absorption spectrometry - Graphite furnace spectrometry
AS 2134.1:1999 Recommended practice for chemical analysis by atomic absorption spectrometry - Flame atomic absorption spectrometry
AS 3641.1:1999 Recommended practice for atomic emission spectrometric analysis - Principles and techniques

AT-ON, Principle of Spectroscopic Analysis

ONORM M 6603-1-1997 Water analysis - Determination of potassium and sodium by atomic absorption spectrometry
ONORM M 6604-1995 Water analysis - Determination of selenium by atomic absorption spectrometry (hydride technique)

Professional Standard - Commodity Inspection, Principle of Spectroscopic Analysis

SN/T 2083-2008 Method for analysis of brass.Spark discharge atomic emission spectrometric
SN/T 2785-2011 Photoelectric Emission Spectroscopic Analysis of Zinc and Zinc Alloys
SN/T 2786-2011 Photoelectric Emission Spectroscopic Analysis of Magnesium and Magnesium Alloys
SN/T 3914-2014 General rules for infrared spectrometer in minerals

British Standards Institution (BSI), Principle of Spectroscopic Analysis

BS EN 62129:2006 Calibration of optical spectrum analyzers
BS EN 12019:1998 Zinc and Zinc Alloys - Optical Emission Spectrometric Analysis
BS ISO 20552:2007 Workplace air - Determination of mercury vapour - Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry
BS EN 62129-1:2016 Calibration of wavelength/optical frequency measurement instruments. Optical spectrum analyzers
BS EN 14726:2005 Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis
BS EN ISO 26845:2009 Chemical analysis of refractories. General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods
BS EN ISO 26845:2008 Chemical analysis of refractories - General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods
BS 7709-5:1993 Analysis of extract solutions of glass. Method for determination of iron (III) oxide by molecular absorption spectrometry and flame atomic absorption spectrometry
DD ENV 13800-2000 Lead and lead alloys. Analysis by flame atomic absorption spectromerty (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES), without separation of the lead matrix
BS DD ENV 13800:2000 Lead and lead alloys - Analysis by flame atomic absorption spectromerty (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES), without separation of the lead matrix
BS EN ISO 10700:1995 Steel and iron - Determination of manganese content - Flame atomic absorption spectrometric method
BS ISO 18516:2006 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Determination of lateral resolution

Professional Standard - Electron, Principle of Spectroscopic Analysis

SJ 2656-1986 Mothod of tungsten spectral analysis
SJ 2657-1986 Mothod of molybdeuum spectral analysis
SJ/Z 3206.5-1989 Treatment methods for sensitized plate and film photograph for chemical analysis using spectrum

International Electrotechnical Commission (IEC), Principle of Spectroscopic Analysis

IEC PAS 62129:2004 Calibration of optical spectrum analyzers
IEC 62129:2006 Calibration of optical spectrum analyzers

Danish Standards Foundation, Principle of Spectroscopic Analysis

DS/EN 62129/Corr. 1:2007 Calibration of optical spectrum analyzers
DS/EN 62129:2006 Calibration of optical spectrum analyzers
DS/EN ISO 26845:2008 Chemical analysis of refractories - General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods
DS/EN 14726:2005 Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis

IN-BIS, Principle of Spectroscopic Analysis

National Metrological Verification Regulations of the People's Republic of China, Principle of Spectroscopic Analysis

JJG 1035-2022 Communication Spectrum Analyzer
JJG(电子) 30901-2006 Verification Regulations for Spectrum Analyzers

GOSTR, Principle of Spectroscopic Analysis

GOST 9716.2-1979 Copper-zinc alloys. Method spectral analysis of metal standard spesimens with photoelectric registration of spectrum
GOST 9717.2-2018 Copper. Method of spectral analysis by metal standard specimens with photographic registration of spectrum
GOST 9716.3-1979 Copper-zinc alloys. Method of spectral analysis of oxide spesimens with photographic registration of spectrum
GOST 9716.1-1979 Copper-zinc alloys. Method of spectral analysis of metal standard spesimens with photographic registration of spectrum

BE-NBN, Principle of Spectroscopic Analysis

NBN T 01-104-1984 Layouts. for standards - Standard for atomic absorption-spectrometric analysis.
NBN P 32-015-1977 zinc and zinc alloys - Spectrographic analysis

Professional Standard - Petroleum, Principle of Spectroscopic Analysis

SY/T 5121-1986 Infrared spectroscopic analysis method of rock organic matter and crude oil

Professional Standard - Ferrous Metallurgy, Principle of Spectroscopic Analysis

YB/T 4142-2006 Statistical rules for processing spectral analysis data
YB/T 4177-2008 Determination of chemical composition in stag by X-ray fluorescence spectrometry
YB/T 4475-2015 Steel sheets and strips.Analysis of zinc-and aluminium-based metallic coatings.Glow-discharge optical-emission spectrometric method

CZ-CSN, Principle of Spectroscopic Analysis

CSN 42 0648 Cast.4-1986 Chemical analysis of metallic chromium. Determination of iron by the photometric and the atomic absorption method methods
CSN 42 0615 Cast.2-1974 Chemical analysis of brazing alloys Determination of siliver by AAS
CSN 42 0636 Cast.2-1975 Chemical analysis of hard lead. Determination of silver by AAS
CSN 42 0615 Cast.14-1974 Chemical analysis of brazing alloys. Determination of antimony by AAS
CSN 42 0615 Cast.13-1974 Chemical analysis of brazing alloys. Determination of lead by AAS
CSN 42 0615 Cast.7-1974 Chemical analysis of brazing alloys. Determination of iron by AAS
CSN 42 0636 Cast.12-1975 Chemical analysis of hard lead. Determination of zinc by AAS
CSN 42 0648 Cast.6-1986 Chemical analysis of metallic chromium. Determination of copper by the photometric and the atomic absorption method methods
CSN 42 0616 Cast.19-1975 Chemical analysis of silver brazing alloys. Determination of antimony by AA?
CSN 42 0616 Cast.15-1975 Chemical analysis of silver brazing alloys. Determination of iron by AAS.
CSN 70 0639 Cast.2-1976 Glass testing. Chemical analysis of glass. Determination of magnesium oxide. Atomic absorption spectrometry
CSN 42 0616 Cast.9-1974 Chemical analysis of silver solders. Determination of nickel by AAS
CSN 42 0616 Cast.12-1974 Chemical analysis of silver solders Determination of lead by AAS
CSN 42 0616 Cast.13-1974 Chemical analysis of silver solders. Determination of zinc by AAS
CSN 42 0616 Cast.17-1975 Chemical analysis of silver brazing alloys. Determination of manganese by AAS
CSN 70 0638 Cast.2-1990 Glass testing methods. Chemical analysis of glass. Determination of calcium oxide by atomic absorption spectometry
CSN 42 0614 Cast.10-1974 Chemical analysis of tin-lead solders. Determination of zinc by atomic absorption spectrometry
CSN 70 0632 Cast.3-1986 Glass testing methods. Chemical analysis of glass. Determination of lead oxide by atomic absorption spectrometry
CSN 42 0614 Cast.5-1974 Chemical analysis of tin-lead solders. Determination of copper by atomic absorption spectrometry
CSN 42 0614 Cast.7-1974 Chemical analysis of tin-lead solders. Determination of iron by atomic absorption spectrometry
CSN 70 0631 Cast.3-1986 Glass testing methods. Chemical analysis of glass. Determination of zinc oxide by atomic absorption spectrometry
CSN 42 0600 Cast.5-1975 Antimony of high purity. Methods of chemical and spectral analysis. Dctermination of silver, bismuth. copper, iron. nickel, lead. and tin by spectral method
CSN 42 0600 Cast.3-1975 Antimony of high parity. Methods of chemical and spectral analysis. Delermmation of arsenic by photomotric metod

Professional Standard - Ocean, Principle of Spectroscopic Analysis

HY/T 152-2013 Speciation of trivalent arsenic and pentavalent arsenic in sea water by atomic fluorescence spectroscopy

Professional Standard - Aviation, Principle of Spectroscopic Analysis

HB 6731.1-2005 Mtehods for spectromertic analysis of aluminium alloys--Part 1:Determination of copper content by flame atomic absorption spectrometric method
HB 6731.2-2005 Mtehods for spectromertic analysis of aluminium alloys--Part 2:Determination of magnesium content by flame atomic absorption spectrometric method
HB 6731.3-2005 Mtehods for spectromertic analysis of aluminium alloys--Part 1:Determination of zinc content by flame atomic absorption spectrometric method
HB 6731.4-2005 Mtehods for spectromertic analysis of aluminium alloys--Part 4:Determination of lead content by flame atomic absorption spectrometric method
HB 6731.5-2005 Mtehods for spectromertic analysis of aluminium alloys--Part 5:Determination of cadmium content by flame atomic absorption spectrometric method
HB 6731.6-2005 Mtehods for spectromertic analysis of aluminium alloys--Part 6:Determination of iron content by flame atomic absorption spectrometric method
HB 6731.7-2005 Mtehods for spectromertic analysis of aluminium alloys--Part 7:Determination of manganese content by flame atomic absorption spectrometric method
HB 6731.8-2005 Mtehods for spectromertic analysis of aluminium alloys--Part 8:Determination of nickel content by flame atomic absorption spectrometric method
HB 6731.9-2005 Mtehods for spectromertic analysis of aluminium alloys--Part 9:Determination of chrome content by flame atomic absorption spectrometric method
HB 7716.7-2002 Spectrometric analysis of titanium alloys Part 7:Determination of copper content-Flame atomic absorption spectrometric method
HB 7716.9-2002 Spectrometric analysis of titanium alloys Part 9:Determination of manganese content-Flame atomic absorption spectrometric method
HB 7716.11-2002 Spectrometric analysis of titanium alloys Part 11:Determination of iron content-Flame atomic absorption spectrometric method
HB 7716.12-2002 Spectrometric analysis of titanium alloys Part 12:Determination of silicon content-Flame atomic absorption spectrometric method
HB 7716.1-2002 Spectrometric analysis of titanium alloys Part 1:Determination of aluminum content-Flame atomic absorption spectrometric method
HB 7716.2-2002 Spectrometric analysis of titanium alloys Part 2:Determination of vanadium content-Flame atomic absorption spectrometric method
HB 7716.3-2002 Spectrometric analysis of titanium alloys Part 3:Determination of chromium content-Flame atomic absorption spectrometric method
HB 7716.4-2002 Spectrometric analysis of titanium alloys Part 4:Determination of molybdenum content-Flame atomic absorption spectrometric method
HB 7716.6-2002 Spectrometric analysis of titanium alloys Part 6:Determination of tin content-Flame atomic absorption spectrometric method
HB 7716.10-2002 Spectrometric analysis of titanium alloys Part 10:Determination of trace manganese content-Flame atomic absorption spectrometric method
HB 7716.8-2002 Spectrometric analysis of titanium alloys Part 8:Determination of trace copper content-Flame atomic absorption spectrometric method
HB 7716.5-2002 Spectrometric analysis of titanium alloys Part 5:Determination of trace molybdenum content-Flame atomic absorption spectrometric method
HB 6731.1-1993 Determination of Copper Content in Aluminum Alloys by Atomic Absorption Spectrometry
HB 6731.9-1993 Determination of Chromium Content in Aluminum Alloys by Atomic Absorption Spectrometry
HB 6731.2-1993 Determination of Magnesium Content in Aluminum Alloys by Atomic Absorption Spectrometry
HB 6731.4-1993 Determination of Lead Content in Aluminum Alloys by Atomic Absorption Spectrometry
HB 6731.5-1993 Determination of Cadmium Content in Aluminum Alloys by Atomic Absorption Spectrometry
HB 6731.6-1993 Determination of Iron Content in Aluminum Alloys by Atomic Absorption Spectrometry
HB 6731.7-1993 Determination of Manganese Content in Aluminum Alloys by Atomic Absorption Spectrometry
HB 6731.8-1993 Determination of Nickel Content in Aluminum Alloys by Atomic Absorption Spectrometry
HB 6731.10-1993 Determination of Vanadium Content in Aluminum Alloys by Atomic Absorption Spectrometry
HB 6731.3-1993 Determination of Zinc Content in Aluminum Alloys by Atomic Absorption Spectrometry
HB 5219.11-1998 Chemical Analysis Methods of Magnesium Alloys - Determination of Nickel Content by Atomic Absorption Spectrometry
HB 5219.13-1998 Magnesium Alloy Chemical Analysis Methods Atomic Absorption Spectroscopic Analysis Determination of Zinc Content
HB 5219.20-1998 Methods of chemical analysis of magnesium alloys - Determination of silver content by atomic absorption spectrometry
HB 5219.3-1998 Methods of chemical analysis of magnesium alloys - Determination of copper content by atomic absorption spectrometry
HB 5219.8-1998 Methods of chemical analysis of magnesium alloys - Determination of manganese content by atomic absorption spectrometry
HB 5219.5-1998 Methods of chemical analysis of magnesium alloys - Determination of iron content by atomic absorption spectrometry
HB 6731.11-2005 Mtehods for spectromertic analysis of aluminium alloys--Part 10:Determination of copper,magnesium,zink,cadmium,iron,manganese,boron,titanium, zirconium,nickel,chrome content by inductivel coupled plasma atomic spectrometric method
HB 6731.12-2005 Mtehods for spectromertic analysis of aluminium alloys--Part 10:Determination of silicon content by inductivel coupled plasma atomic spectrometric method
HB 7716.17-2022 Spectral analysis method of chemical composition of titanium alloys Part 17: Determination of boron content by inductively coupled plasma atomic emission spectrometry

CEN - European Committee for Standardization, Principle of Spectroscopic Analysis

EN 14726:2019 Aluminium and aluminium alloys - Determination of the chemical composition of aluminium and aluminium alloys by spark optical emission spectrometry

国家能源局, Principle of Spectroscopic Analysis

SY/T 5121-2021 Infrared spectroscopic analysis method of organic matter and crude oil in rocks
SY/T 7433-2018 Composition analysis of natural gas using laser Raman spectroscopy

Professional Standard - Agriculture, Principle of Spectroscopic Analysis

水产品质量安全检验手册 1.2.4.4-2005 Chapter 1 General Introduction Section 2 Analytical Methods for Aquatic Product Inspection 4. Physicochemical Analysis (4) Atomic Fluorescence Spectrometry
SN/T 5566-2023 General Rules of Laser Micro Raman Spectroscopy Analysis Method
774兽药典二部-2015 Appendix Contents 0400 Spectroscopy 0403 Atomic Absorption Spectrophotometry
778兽药典一部-2015 Appendix Contents 0400 Spectroscopy 0406 Atomic Absorption Spectrophotometry
NY/T 1944-2010 Determination of calcium in feed.Atomic absorption spectrometry

Professional Standard - Geology, Principle of Spectroscopic Analysis

DZ/T 0064.81-2021 Methods of Analytical Groundwater Quality Part 81: Determination of Mercury Amounts by Atomic Fluorescence Spectrometry

国家市场监督管理总局、中国国家标准化管理委员会, Principle of Spectroscopic Analysis

GB/T 6040-2019 General rules for infrared analysis
GB/T 39540-2020 Fast determination of shale gas composition—Laser Raman spectroscopy
GB/T 41072-2021 Surface chemical analysis—Electron spectroscopies—Guidelines for ultraviolet photoelectron spectroscopy analysis
GB/T 37969-2019 Standard guidelines for near infrared qualitative analysis
GB/T 7728-2021 Chemical analysis of metallurgical products—General rule for flame atomic absorption spectrometric methods

PL-PKN, Principle of Spectroscopic Analysis

PN H04155-09-1986 Chemical analysis of silica raw materials and refractory products Method spectrographic

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, Principle of Spectroscopic Analysis

ITU-R SM.328-7-1990 Spectra and Bandwidth of Emissions - Section 1A - Spectrum Engineering and Computer-Aided Principles and Techniques

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Principle of Spectroscopic Analysis

GB/T 1819.17-2017 Methods for chemical analysis of tin concentrates—Part 17：Determination of mercury content—Atomic fluorescence spectrometric method
GB/T 33086-2016 Water treatment chemical—Determination of arsenic and mercury—Atomic fluorescence spectrometry

Guangdong Provincial Standard of the People's Republic of China, Principle of Spectroscopic Analysis

DB44/T 1602-2015 Analysis Method of Stone Composition--X-ray Fluorescence Spectrometry

American Society for Testing and Materials (ASTM), Principle of Spectroscopic Analysis

ASTM E2994-21 Standard Test Method for Analysis of Titanium and Titanium Alloys by Spark Atomic Emission Spectrometry and Glow Discharge Atomic Emission Spectrometry (Performance-Based Method)
ASTM E996-94(1999) Standard Practice for Reporting Data in Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy
ASTM E718-80 Method for Spectrographic Analysis of Cartridge Brass
ASTM E2209-02(2006)e1 Standard Test Method for Analysis of High Manganese Steel Using Atomic Emission Spectrometry
ASTM E1251-04 Test Method for Analysis of Aluminum and Aluminum Alloys by Atomic Emission Spectrometry
ASTM E2209-02 Standard Test Method for Analysis of High Manganese Steel Using Atomic Emission Spectrometry
ASTM E2209-02(2006)e2 Standard Test Method for Analysis of High Manganese Steel Using Atomic Emission Spectrometry
ASTM E1251-17a Test Method for Analysis of Aluminum and Aluminum Alloys by Atomic Emission Spectrometry
ASTM E1097-07 Standard Guide for Direct Current Plasma-Atomic Emission Spectrometry Analysis

Shaanxi Provincial Standard of the People's Republic of China, Principle of Spectroscopic Analysis

DB61/T 1161-2018 Natural Gas Composition Analysis Laser Raman Spectroscopy Marshal

The American Road & Transportation Builders Association, Principle of Spectroscopic Analysis

AASHTO DIVISION I-A 4.4 Single Mode Spectral Analysis Method - Procedure 2

Lithuanian Standards Office , Principle of Spectroscopic Analysis

LST EN 62129-2006 Calibration of optical spectrum analyzers (IEC 62129:2006)
LST EN 62129-2006/AC-2007 Calibration of optical spectrum analyzers (IEC 62129:2006)
LST EN 14726-2005 Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis

AASHTO - American Association of State Highway and Transportation Officials, Principle of Spectroscopic Analysis

DIVISION I-A 4.5-1996 Multimode Spectral Analysis Method - Procedure 3

Liaoning Provincial Standard of the People's Republic of China, Principle of Spectroscopic Analysis

DB21/T 2070-2013 Chemical Analysis of Aluminosilicate Refractories by Atomic Absorption Spectrometry

AENOR, Principle of Spectroscopic Analysis

UNE-EN 14726:2006 Aluminum and aluminium alloys. Chemical analysis. Guideline for spark optical emission spectometric analysis

未注明发布机构, Principle of Spectroscopic Analysis

BS EN ISO 26845:2008(2009) Chemical analysis of refractories — General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP - AES) methods