ZH
RU
ES

Three sets and one tour

Three sets and one tour, Total:155 items.

In the international standard classification, Three sets and one tour involves: Road engineering, Quality, Road vehicle systems, Meat, meat products and other animal produce, Acoustics and acoustic measurements, Road vehicles in general, Products of the chemical industry, Protection against crime, Alarm and warning systems, Organic chemicals, Analytical chemistry, Vocabularies, Rubber, Farming and forestry, Nuclear energy engineering, Valves, Tobacco, tobacco products and related equipment, Earthworks. Excavations. Foundation construction. Underground works, Paper and board, Metrology and measurement in general, Iron and steel products, Optics and optical measurements, Thermodynamics and temperature measurements, Non-ferrous metals, Air quality, Fuels, Materials for aerospace construction, Protection of and in buildings, Motor cycles and mopeds, Leather technology, Sensory analysis, Natural gas, Aircraft and space vehicles in general, TEXTILE AND LEATHER TECHNOLOGY, Plastics, Paints and varnishes, Edible oils and fats. Oilseeds.


HU-MSZT, Three sets and one tour

Professional Standard - Agriculture, Three sets and one tour

SE-SIS, Three sets and one tour

RU-GOST R, Three sets and one tour

  • GOST 24333-1997 Uniform provisions concerning the approval of advance-warning triangles
  • GOST R 41.27-2001 Uniform provisions concerning the type approval of agvancewarning triangles
  • GOST R 54011-2010 Conformity assessment. General rules for product sampling in mandatory conformity assessment by the third party
  • GOST R 8.611-2005 State system for ensuring the uniformity of measurements. Standard thermoelectric platinumrhodium/platinum converters of the first, the second and the third grades. Verification procedure
  • GOST R 8.848-2013 State system for ensuring the uniformity of measurements. Tristimulus colorimeters. Method for the determination of channels parameters
  • GOST R 8.779-2012 State system for ensuring the uniformity of measurements. Standards thermoelectric platinumrhodium/platinumrhodium converters of the first, second and third grades. Verification procedure
  • GOST R 41.92-1999 Uniform provisions concerning the approval of non-original replacement exhaust silencing systems (RESS) for motorcycles, mopeds and three-wheeled vehicles
  • GOST R ISO 17070-2017 Leather. Chemical tests. Method for determination of tetrachlorophenol-, trichlorophenol-, dichlorophenol-, monochlorophenol-isomers and pentachlorophenol content

Association Francaise de Normalisation, Three sets and one tour

  • NF X50-078:2009 Conformity assessment - General requirements for third-party marks of conformity.
  • NF X50-078*NF EN ISO/IEC 17030:2021 Conformity assessment - General requirements for third-party marks of conformity
  • NF EN ISO/IEC 17030:2021 Evaluation de la conformité - Exigences générales pour les marques de conformité par tierce partie
  • NF P94-070:1994 Sols : reconnaissance et essais - Essais à l'appareil triaxial de révolution - Généralités - Définitions.
  • NF EN ISO 8742:1997 Goupilles cannelées à cannelures centrales constantes sur le tiers de la longueur non débouchantes
  • NF Q03-127:2012 Paper and board - Determination of bending stiffness - General principles for two-point, three-point and four-point methods.
  • NF C52-111/A1:1974 Three-phase two-winding transformers 1,000 to 10,000 kVA Rated primary voltage 5.5 to 63 kV - Rated secondary voltage 2 to 20 kV Additional Requirements - Characteristics
  • NF EN ISO 17070:2015 Cuir - Essais chimiques - Détermination de la teneur en isomères de monochlorophénol, dichlorophénol, trichlorophénol, tétrachlorophénol et pentachlorophénol
  • NF S31-140:1995 Electroacoustics. Instruments for measurement of aircraft noise. Performance requirements for systems to measure one-thirs-octave band sound pressure levels in noise certification of transport-category aeroplanes.

Danish Standards Foundation, Three sets and one tour

ZA-SANS, Three sets and one tour

  • SANS 20027:1998 Uniform provisions for the approval of advance-warning triangles
  • SANS 20009:2007 Uniform provisions concerning the approval of category L2, L4 and L5 vehicles with regard to noise
  • SANS 60839-1-3:2007 Alarm systems Part 1: General requirements Section Three: Environmental testing

Korean Agency for Technology and Standards (KATS), Three sets and one tour

  • KS Q ISO/IEC 17030-2004(2019) Conformity assessment－General requirements for third-party marks of conformity
  • KS M ISO 17070-2017(2022) Leather — Chemical tests — Determination of tetrachlorophenol-, trichlorophenol-, dichlorophenol-, monochlorophenol-isomers and pentachlorophenol content

International Organization for Standardization (ISO), Three sets and one tour

  • ISO/IEC 17030:2021 Conformity assessment — General requirements for third-party marks of conformity
  • ISO 4097:1980 Rubber, ethylene-propylene-diene (EPDM) — Non-oil extended raw general purpose types — Evaluation procedures
  • ISO 5628:2019 Paper and board — Determination of bending stiffness — General principles for two-point, three-point and four-point methods
  • ISO 5628:2012 Paper and board - Determination of bending stiffness - General principles for two-point, three-point and four-point methods
  • ISO 4097:1990 Rubber, ethylene-propylene-diene (EPDM); non-oil-extended general purpose types; evaluation procedure
  • ISO 17070:2015 | IULTCS/IUC 25 Leather — Chemical tests — Determination of tetrachlorophenol-, trichlorophenol-, dichlorophenol-, monochlorophenol-isomers and pentachlorophenol content

ES-UNE, Three sets and one tour

  • UNE-EN ISO/IEC 17030:2022 Conformity assessment - General requirements for third-party marks of conformity (ISO/IEC 17030:2021)
  • UNE-EN ISO 17070:2015 Leather - Chemical tests - Determination of tetrachlorophenol-, trichlorophenol-, dichlorophenol-, monochlorophenol-isomers and pentachlorophenol content (ISO 17070:2015)

未注明发布机构, Three sets and one tour

  • JIS Q 17030:2023 Conformity assessment -- General requirements for third-party marks of conformity
  • GJB 843.31A-2018 Safety Regulations for Design of Submarine Nuclear Power Plants Part 31: Mechanical Analysis Requirements for Safety Level I, II, and III Equipment and Systems

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, Three sets and one tour

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Three sets and one tour

  • GB/T 22288-2008 Determination of melamine,ammeline,ammeline,ammelide and cyanuric acid in original plant products.GC-MS method
  • GB/T 22366-2008 Senory analysis.Methodology.General guidance for measuring odour,flavour and taste detection thresholds by a three-alternative forced-choice(3-AFC)procedure
  • GB/T 27894.6-2012 Natural gas.Determination of composition with defined uncertainty by gas chromatography.Part 6:Determination of hydrogen helium oxygen nitrogen carbon dioxide and C<下标1> to C<下标8> hydrocarbons using three capillary columns
  • GB/T 22366-2022 Sensory analysis — Methodology —General guidance for measuring odour, flavour and taste detection thresholds by a three-alternative forced-choice (3-AFC) procedure
  • GB/T 28794.5-2012 Determination of natural gas composition by gas chromatography under certain uncertainty Part 5: Determination of nitrogen, carbon dioxide and hydrocarbons from C1 to C5 and C6+ by three chromatographic columns in laboratory and on-line process systems

Standard Association of Australia （SAA）, Three sets and one tour

Japanese Industrial Standards Committee (JISC), Three sets and one tour

  • JIS Q 17030:2004 Conformity assessment -- General requirements for third-party marks of conformity
  • JIS Q 1001:2005 Conformity assessment -- Conformity assessment for Japanese Industrial Standards -- General guidance on a third-party certification system for products
  • JIS Q 1001:2009 Conformity assessment -- Conformity assessment for Japanese Industrial Standards -- General guidance on a third-party certification system for products
  • JIS Q 1013:2009 Conformity assessment -- Conformity assessment for Japanese Industrial Standards -- Guidance on a third-party certification system for steel products
  • JIS Q 1001 AMD 1:2015 Conformity assessment -- Conformity assessment for Japanese Industrial Standards -- General guidance on a third-party certification system for products (Amendment 1)
  • JIS Q 1001:2020 Conformity assessment -- Conformity assessment for Japanese Industrial Standards -- General guidance on a third-party certification system for products and these processing technology

German Institute for Standardization, Three sets and one tour

  • DIN EN 17343:2022-04 Railway applications - General terms and definitions; Trilingual version prEN 17343:2022 / Note: Date of issue 2022-03-04*Intended as replacement for DIN EN 17343 (2021-03).
  • DIN EN 13717:2003 Surface active agents - Determination of primary, secondary and tertiary amino nitrogen - Potentiometric titration; German version EN 13717:2002
  • DIN EN 17343:2021 Railway applications - General terms and definitions; Trilingual version EN 17343:2020
  • DIN EN ISO/IEC 17030:2021 Conformity assessment - General requirements for third-party marks of conformity (ISO/IEC 17030:2021); German and English version EN ISO/IEC 17030:2021
  • DIN EN ISO 10272-2/A1:2021-12 Conformity assessment - General requirements for third-party marks of conformity (ISO/IEC 17030:2021); German and English version EN ISO/IEC 17030:2021
  • DIN EN ISO/IEC 17030:2021-12 Conformity assessment - General requirements for third-party marks of conformity (ISO/IEC 17030:2021); German and English version EN ISO/IEC 17030:2021
  • DIN EN ISO 10272-1/A1:2021-12 Conformity assessment - General requirements for third-party marks of conformity (ISO/IEC 17030:2021); German and English version EN ISO/IEC 17030:2021
  • DIN EN ISO/IEC 17000:2020 Conformity assessment - Vocabulary and general principles (ISO/IEC 17000:2020); Trilingual version EN ISO/IEC 17000:2020
  • DIN EN 12258-1:2012 Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms; Trilingual version EN 12258-1:2012
  • DIN 38413-8:2000-09 German standard methods for the examination of water, waste water and sludge - Single components (group P) - Part 8: Determination of nitrilotriacetic acid (NTA), ethylenedinitrilotetraacetic acid (EDTA) and diethylenetrinitrilopentaacetic acid (DTPA) ...
  • DIN EN ISO 17070:2015-05 Leather - Chemical tests - Determination of tetrachlorophenol-, trichlorophenol-, dichlorophenol-, monochlorophenol-isomers and pentachlorophenol content (ISO 17070:2015); German version EN ISO 17070:2015

Taiwan Provincial Standard of the People's Republic of China, Three sets and one tour

  • CNS 7916-1981 Calculation of Percent of Primary Secondary and Tertiary Amines in Fatty Amines
  • CNS 7914-1981 Total Primary, Secondary, and Tertiary Amine Value of Fatty Amines by Alternative Indicator Method
  • CNS 7913-1981 Total, Primary, Secondary, and Tertiary Amine Values of Fatty Amines,Amidoamines, and Diamines by referee PotentiometricMethod

European Committee for Standardization (CEN), Three sets and one tour

  • EN 13717:2002 Surface active agents - Determination of primary, secondary and tertiary amino nitrogen - Potentiometric titration
  • EN ISO 15234:2010 Paints and varnishes - Testing of formaldehyde-emitting coatings and melamine foams - Determination of the steady-state concentration of formaldehyde in a small test chamber (ISO 15234:1999)

中华人民共和国环境保护部, Three sets and one tour

  • GB 11220.2-1989 Determination of uranium in soil trialkylphosphine oxide extraction-solid fluorimetry

Lithuanian Standards Office , Three sets and one tour

  • LST EN ISO/IEC 17030:2009 Conformity assessment - General requirements for third-party marks of conformity (ISO/IEC 17030:2003)

CH-SNV, Three sets and one tour

  • SN EN ISO/IEC 17030:2021 Conformity assessment - General requirements for third-party marks of conformity (ISO/IEC 17030:2021)

AENOR, Three sets and one tour

  • UNE-EN ISO/IEC 17030:2009 Conformity assessment - General requirements for third-party marks of conformity (ISO/IEC 17030:2003)
  • UNE 28506:1978 DIMENSIONS OF LEVER SWITCH OF MANUAL OPERATION, FIXED BY ONE OR THREE BORINGS (CLASS 3) USED IN AIRCRAFT.

Professional Standard - Commodity Inspection, Three sets and one tour

  • SN/T 4003-2013 Food contact materials.Polymers.Determination of 2,4,6-triamino- 1,3,5-triazine(melamine)in food simulants.Liquid chromatography- tandem mass spectrometry method

AT-ON, Three sets and one tour

British Standards Institution (BSI), Three sets and one tour

  • 20/30401351 DC BS EN ISO/IEC 17030. Conformity assessment. General requirements for third-party marks of conformity
  • 21/30433679 DC BS EN ISO/IEC 17030. Conformity assessment. General requirements for third-party marks of conformity
  • BS ISO 5628:2019 Tracked Changes. Paper and board. Determination of bending stiffness. General principles for two-point, three-point and four-point methods
  • BS EN ISO 17070:2015 Tracked Changes. Leather. Chemical tests. Determination of tetrachlorophenol-, trichlorophenol-, dichlorophenol-, monochlorophenol-isomers and pentachlorophenol content
  • BS EN 61265:1995 Electroacoustics - Instruments for measurement of aircraft noise - Performance requirements for systems to measure one-third-octave band sound pressure levels in noise certification of transport-category aircraft
  • 19/30369425 DC BS EN ISO 21660-3. Solid recovered fuels. Determination of moisture content using the oven dry method. Part 3. Moisture in general analysis sample
  • BS EN ISO 15234:2010 Paints and varnishes. Testing of formaldehyde-emitting coatings and melamine foams. Determination of the steady-state concentration of formaldehyde in a small test chamber
  • BS EN 14105:2011 Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of free and total glycerol and mono-, di-, triglyceride contents
  • BS EN 14105:2020 Fat and oil derivatives. Fatty Acid Methyl Esters (FAME). Determination of free and total glycerol and mono-, di-, triglyceride contents

Professional Standard - Nuclear Industry, Three sets and one tour

  • EJ/T 480-1989 Construction Design Regulations for Primary Circuit System of 300MW Pressurized Water Reactor Nuclear Power Plant
  • EJ/T 392-1989 Specifications for Design of Supporting Components for Primary Equipment of 300MW Pressurized Water Reactor Nuclear Power Plant

United States Navy, Three sets and one tour

  • NAVY MIL-PRF-81836 B SUPP 1-1998 FILTER AND DISPOSABLE ELEMENT, FLUID PRESSURE, HYDRAULIC, 3 MICRON ABSOLUTE, GENERAL SPECIFICATION FOR
  • NAVY MIL-PRF-81836 B-1998 FILTER AND DISPOSABLE ELEMENT, FLUID PRESSURE, HYDRAULIC, 3 MICRON ABSOLUTE, GENERAL SPECIFICATION FOR
  • NAVY MIL-E-24572 B-1992 EXTINGUISHER, FIRE, BROMOTRIFLUOROMETHANE (HALON 1301) SYSTEM COMPONETS (FIXED PIPE, PNEUMATICALLY ACTUATED, NAVAL SHIPBOARD USE)
  • NAVY QPL-24572-16-2004 EXTINGUISHER, FIRE, BROMOTRIFLUOROMETHANE (HALON 1301) SYSTEM COMPONENTS (FIXED PIPE, PNEUMATICALLY ACTUATED, NAVAL SHIPBOARD USE)

Professional Standard - Tobacco, Three sets and one tour

  • YC/T 242-2008 Tobacco flavouring.Determination of ethanol ,1,2,propylene glycol and glycerol.Gas chromatographic method

American Society for Testing and Materials (ASTM), Three sets and one tour

  • ASTM E2469-08a Standard Test Method for Chloride in Mono-, Di- and Tri-ethylene Glycol by Ion Chromatography
  • ASTM D2074-07(2019) Standard Test Methods for Total, Primary, Secondary, and Tertiary Amine Values of Fatty Amines by Alternative Indicator Method
  • ASTM D6584-10ae1 Standard Test Method for Determination of Total Monoglyceride, Total Diglyceride, Total Triglyceride, and Free and Total Glycerin in B-100 Biodiesel Methyl Esters by Gas Chromatography
  • ASTM D6584-10a Standard Test Method for Determination of Total Monoglyceride, Total Diglyceride, Total Triglyceride, and Free and Total Glycerin in B-100 Biodiesel Methyl Esters by Gas Chromatography
  • ASTM E1573-02 Standard Test Method for Evaluating Masking Sound in Open Offices Using A-Weighted and One-Third Octave Band Sound Pressure Levels
  • ASTM E1573-93(1998) Standard Test Method for Evaluating Masking Sound in Open Offices Using A-Weighted and One-Third Octave Band Sound Pressure Levels

Shanghai Provincial Standard of the People's Republic of China, Three sets and one tour

  • DB31/T 310003-2021 Technical specifications for on-site monitoring of waste gas from fixed pollution sources in the Yangtze River Delta Ecological Green Integrated Development Demonstration Zone

Zhejiang Provincial Standard of the People's Republic of China, Three sets and one tour

  • DB33/T 310003-2021 Technical specifications for on-site monitoring of waste gas from fixed pollution sources in the Yangtze River Delta Ecological Green Integrated Development Demonstration Zone

Jiangsu Provincial Standard of the People's Republic of China, Three sets and one tour

  • DB32/T 310003-2021 Technical specifications for on-site monitoring of waste gas from fixed pollution sources in the Yangtze River Delta Ecological Green Integrated Development Demonstration Zone

未注明发布机构, Three sets and one tour

  • JIS Q 17030:2023 Conformity assessment -- General requirements for third-party marks of conformity
  • GJB 843.31A-2018 Safety Regulations for Design of Submarine Nuclear Power Plants Part 31: Mechanical Analysis Requirements for Safety Level I, II, and III Equipment and Systems

IX-EU/EC, Three sets and one tour

  • 73/44/EEC-1973 Council Directive on the Approximation of the Laws of the Member States Relating to the Quantitative Analysis of Ternary Fibre Mixtures

KR-KS, Three sets and one tour

  • KS M ISO 17070-2017 Leather — Chemical tests — Determination of tetrachlorophenol-, trichlorophenol-, dichlorophenol-, monochlorophenol-isomers and pentachlorophenol content

National Aeronautics and Space Administration (NASA), Three sets and one tour

  • NASA NACA-RM-L57A30-1957 Experimental determination at subsonic speeds of the oscillatory and static lateral stability derivatives of a series of delta wings with leading-edge sweep from 30 degrees to 86.5 degrees

Shandong Provincial Standard of the People's Republic of China, Three sets and one tour

  • DB37/T 2869.1-2016 Determination of organotin in plastics and their products by gas chromatography-mass spectrometry part 1: monobutyltin, dibutyltin, tributyltin

International Electrotechnical Commission (IEC), Three sets and one tour

  • IEC 61265:1995/COR1:1995 Electroacoustics - Instruments for measurement of aircraft noise - Performance requirements for systems to measure one-third-octave band sound pressure levels in noise certification of transport-category aeroplanes
  • IEC 61265:1995 Electroacoustics - Instruments for measurement of aircraft noise - Performance requirements for systems to measure one-third-octave band sound pressure levels in noise certification of transport-category aeroplanes

European Association of Aerospace Industries, Three sets and one tour

  • AECMA PREN 3662-005-1999 Aerospace Series Circuit Breakers, Three-Pole, Temperature Compensated, Rated Current 20 A to 50 A Part 005: With Polarized Signal Contact and Unified Mounting Hardware Centre-to-Centre Distance of Terminals 21 mm Product Standard Edition P 2
  • AECMA PREN 3662-005-1997 Aerospace Series Circuit Breakers, Three-Pole, Temperature Compensated, Rated Current 20 A to 50 A Part 005: With Polarized Signal Contact and Unified Mounting Hardware Centre-to-Centre Distance of Terminals 21 mm Product Standard Edition P 1

Military Standard of the People's Republic of China-General Armament Department, Three sets and one tour

  • GJB 533.32A-2021 Methods for detection of air components in submarine cabins - Part 32: Determination of undecane, dodecane, tridecane, tetradecane, pentadecane, hexadecane and heptadecane by chromatography/mass spectrometry

  Three sets and one tour, Tianxun-1, Once every three years.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved