ZH
RU
ES
Compressive strength samples
Compressive strength samples, Total:497 items.
In the international standard classification, Compressive strength samples involves: Construction materials, Soil quality. Pedology, Refractories, Mechanical testing, Ceramics, Wood, sawlogs and sawn timber, Products of the chemical industry, Paper products, Metalliferous minerals, Mining and quarrying, Paper and board, Iron and steel products, Earthworks. Excavations. Foundation construction. Underground works, Pipeline components and pipelines, Rubber and plastics products, AGRICULTURE, Reinforced plastics, Freight distribution of goods, Seals, glands, Fuels, Testing of metals, Plastics, Ferroalloys, Measurement of force, weight and pressure, Adhesives, Structures of buildings, Waxes, bituminous materials and other petroleum products, Electrical accessories, Analytical chemistry, Powder metallurgy, Raw materials for rubber and plastics, Welding, brazing and soldering, Non-destructive testing, Inorganic chemicals, Chipless working equipment, Wood-based panels, Aerosol containers, Materials for aerospace construction, Products of the textile industry, Materials for the reinforcement of composites, Fasteners, Road vehicle systems, Construction industry, Equipment for petroleum and natural gas industries, Road engineering, Glass, Lamps and related equipment, Electrical wires and cables, Test conditions and procedures in general, Coatings and related processes used in aerospace industry.
TR-TSE, Compressive strength samples
- TS 3114-1978 Determination Of Compressive Strength Of Concrete Test Specimens
- TS 2029-1975 DETERMINATION OF TRIAXIAL COMPRESSIVE STRENGTH
- TS 3260-1978 DETERMINATION OF COMPRESSIVE STRENGTH OF CONCRETE BY SURFACE HARDNESS METHOD
- TS 2150-1975 BREAKING STRENGTH AND ELONGATION OF TEXTILE FABRICS : GRAB METHOD
- TS 3289-1979 DETERMINATION OF COMPRESSIVE STRENGTH OF LIGHTWEIGHT AGGREGATE INSULATING CONCRETE TEST SPECIMENS
Association Francaise de Normalisation, Compressive strength samples
- NF EN 658-4:2003 Céramiques techniques avancées - Propriétés techniques des céramiques composites à température ambiante - Partie 4 : détermination de la résistance au cisaillement interlaminaire par compression d'éprouvettes entaillées
- NF P18-455:2003 Testing hardened concrete - Part 3 : compressive strength of test specimens.
- NF P18-430-3:2012 Testing hardened concrete - Part 3 : compressive strength of test specimens.
- NF Q03-125*NF ISO 12192:2011 Paper and board - Determination of compressive strength - Ring crush method
- NF EN ISO 293:2023 Plastiques - Moulage par compression des éprouvettes en matières thermoplastiques
- NF B10-614*NF EN 1926:2007 Natural stone test methods - Determination of uniaxial compressive strength
- NF T48-107:1994 ASBESTOS AND RUBBER COMPRESSED SHEETS FOR SEALS. RESISTANCE TO HYDRAULIC PRESSURE AT AMBIENT TEMPERATURE.
- NF T48-103:1994 Asbestos and rubber compressed sheets for seals. Determination of tensile strength.
- NF T48-108:1994 Asbestos and rubber compressed sheets for seals. Determination of bending resistance.
- NF P18-650-11*NF EN 1097-11:2013 Tests for mechanical and physical properties of aggregates - Part 11 : determination of compressibility and confined compresssive strength of lightweight aggregates
- NF B40-320*NF ISO 22685:2022 Refractory products - Determination of compressive strength at elevated temperature
- NF ISO 22685:2022 Produits réfractaires - Détermination de la résistance à la compression à température élevée
- NF L17-468*NF EN 6038:2017 Aerospace series - Fibre reinforced plastics - Test method - Determination of the compression strength after impact
- NF G07-013-13*NF EN ISO 105-E13:1997 Textiles. Tests for colour fastness. Part E13 : colour fastness to acid-felting : severe.
- FD E29-760:2014 Gaz cylinders - Fatigue srength testing under repeated pressurizing for liquefied or dissolved compressed gases
- NF EN 1894:2005 Céramiques techniques avancées - Propriétés mécaniques des céramiques composites à haute température sous atmosphère neutre - Détermination de la résistance au cisaillement par compression d'éprouvettes entaillées
- NF EN ISO 29022:2013 Médecine bucco-dentaire - Adhérence - Essai de résistance au cisaillement sur échantillons à bord entaillé
- NF P19-118:1997 Determination of compressive strength of lightweight aggregate concrete with open structure.
- NF ISO 4656:2012 Ingrédients de mélange du caoutchouc - Noir de carbone - Détermination de l'indice d'absorption d'huile (OAN) et de l'indice d'absorption d'huile d'échantillons comprimés (COAN)
- NF G30-104-2:2010 Textiles - Bandes élastiques médicales de contention - Partie 2 : détermination de la force de traction après un vieillissement accéléré ou une stérilisation à la vapeur
- NF P33-402-2*NF EN 17468-2:2022 Fibre-cement products - Determination of pull through and shear resistance and bending strength calculations - Part 2 : profiled sheets
- NF T48-106:1994 ASBESTOS AND RUBBER COMPRESSED SHEETS FOR SEALS. BREAKING STRENGTH AFTER LIQUID IMMERSION.
- NF EN 13892-2:2003 Méthodes d'essai des matériaux pour chapes - Partie 2 : détermination de la résistance à la flexion et à la compression
- NF T57-160-3*NF ISO 3597-3:2004 Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 3 : determination of compressive strength
- NF T45-122*NF ISO 4656:2012 Rubber compounding ingredients - Carbon black - Determination of oil absorption number (OAN) and oil absorption number of compressed sample (COAN)
- NF P12-311:2000 Methods of test for mortar for masonry - Part 11 : determination of flexural and compressive strength of hardened mortar.
RO-ASRO, Compressive strength samples
- STAS 126-1990 SHAPED REFRACTORY PRODCTS Compression strength determination
- STAS 2055/5-1985 ABRASIVE MATEKIALS Dctermination of compression strength
- STAS 9484/3-1974 SILICA-ALUMINA MINING PRODUCTS Methods of physical and mechanical tests. Determination of compression strength and tensile strength
- STAS 10275/4-1991 PLASTER Determination of bending resistance and compression strength
- STAS 8664-1970 COMPRESSION STRES STREXGTH CHARACTERISTICS OF FLEXIBII.E CELLULAR MATERIALS
- STAS SR ISO 7373:1995 Ferroalloys - Experimental methods for checking the preclsion of sample division
- STAS 10537-1976 CARBON MATERIALS Determination of (he strength to compression, bending and traction
- STAS 8942/5-1975 Foundation ground DETERMINATION OF SHEARING STRENGTH BY TRIAXIAL COMPRESSION ON UNCONSOLIDATED AND UNDRAIDED (UU) SAMPLES OF COHESIVE SOILS
- STAS 128/2-1981 Refractory products DIFFERFNTIAL DETFRMINATION OF COMPRESSION DEFORMATION TEMPERATFRE
- STAS 9259-1972 FINISHED PRODUCTS FROM PAPER INDUSTRY Pick test for surface strength of paper (Dennison Method)
- STAS 6200/5-1971 SHAPED NATURAL STONE FOR BUILDING Methods of physical, mechanical and mineralogical test Determination of the compression strength
CZ-CSN, Compressive strength samples
Standard Association of Australia （SAA）, Compressive strength samples
- AS 1289.6.4.1:1998 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of compressive strength of a soil - Compressive strength of a specimen tested in undrained triaxial compression without measurement of pore water p
- AS 1289.6.4.2:1998 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of compressive strength of a soil - Compressive strength of a saturated specimen tested in undrained triaxial compression with measurement of pore
- AS 1012.9:1999 Methods of testing concrete - Determination of the compressive strength of concrete specimens
- AS 4133.4.2:1993 Methods of testing rocks for engineering purposes - Rock strength tests - Determination of uniaxial compressive strength
- AS 1012.19.2:2000(R2014)
- AS 1012.19.1:2000(R2014)
- AS 4133.4.3.2:2013
- AS 4133.4.3.1:2009
Japanese Industrial Standards Committee (JISC), Compressive strength samples
- JIS A 1107:2002 Method of sampling and testing for compressive strength of drilled cores of concrete
- JIS A 1107:2012 Method of sampling and testing for compressive strength of drilled cores of concrete
- JIS M 0302:2000 Method of test for compressive strength of rock
- JIS M 0302:1975 Method of test for compressive strength of rock
- JIS R 1608:2003 Testing methods for compressive strength of fine ceramics
- JIS R 1608:1990 Testing methods for compressive strength of high performance ceramics
- JIS K 7151:1995 Plastics -- Compression moulding test specimens of thermoplastic materials
- JIS A 1107:2022 Method of sampling and testing for compressive strength of drilled cores of concrete
- JIS K 6852:1994 Testing methods for shear strength of adhesive bonds by compression loading
- JIS K 7191-3:1996 Plastics -- Determination of temperature of deflection under load -- Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
Professional Standard - Light Industry, Compressive strength samples
- QB 1048-1991 Compression Strength Tester
- QB/T 1093-1991 Determination of along-grain compressive shear strength of furniture solid wood adhesive joints
PL-PKN, Compressive strength samples
- PN S13062-1966 Determina?ion of compressive s?reng?h of glass
- PN BN 7102-01-1966 Lignofol and lignostone De?ermination of toughness strength
- PN D04216-1965 Lignofol i lignos?on Oznaczanie wytrzyma?o?ci na zginanie statyczne
- PN D04215-1965 Lignofol and Lignostone. Determi- nation of compressive strength
- PN D04241-1974 Plywood Determination of compressioi strength parallel to layers
- PN BN 7451-11-1965 Bookbinder products The marking of degree of pressing and thickness
- PN D04217-1965 Lignofol and lignosfone Determination of shearing strength
- PN D04218-1965 Lignofol and lignos?one De?ermina?ion of ?encile s?reg?h
- PN C82055-01-1991 Test methods of pressed carbon products Determination of compressivestrength
SE-SIS, Compressive strength samples
- SIS 20 01 01
- SIS 11 01 31 E-1965 Provtagning f?r mindre omfattande h?llfasthetsprovning av tryckk?rlsr?r
- SIS 11 01 32 E-1965 In the event of any differences in interpretation of this standard the Swedish version shall take precedence over this translation.
- SIS SS 13 72 30-1983 Concrete testing - Hardened concrete - Compressive strength of est specimens
- SIS SS 13 72 20-1984 Concrete testing — Hardened shotcrete — Compressive strength of shotcreted test specimens
- SIS SS 25 12 67-1977 Textiles — Woven fabrics — Determination of breaking strength and elongation (Strip method)
- SIS SS 13 72 23-1980 Concrete testing — Hardened concrete — Compressive strength of test speci- mens cured together with a structure
RU-GOST R, Compressive strength samples
- GOST 23775-1979 Carbon products. Methods of determination for compressive, bend, tensile, strengths (diametral compression)
- GOST 4071.2-1994 Insulating refractory products. Determination of cold compressive strength
- GOST 4071.2-2021 Insulating refractory products. Determination of cold compressive strength at room temperature
- GOST R 54866-2011 Thermoplastics pipes. Determination of the long-term hydrostatic strength on pipe samples by extrapolation method
- GOST 33844-2016 Polymer composites. Test method for determination of compression-after-impact strength of carbon-fibre-reinforced laminates
- GOST 26798.2-1996 I-G and I-H well cement. Test methods
- GOST 26798.2-1985 Oil-well cements. Test methods of strength limits in bending and compression
- GOST 4071-1980 Refractory articles. The determination of cold crushing strength
- GOST 4071.1-1994 Refractory products with a true porosity of less than 45%. Determination of cold compressive strength
- GOST 4071.1-2021 Refractory products with less than 45 % true porosity. Method for determination of compressive strength at room temperature
- GOST 25714-1983 Non-destructive control. Acoustic sound method of open porosity, apparent density, density and compression strength testing of refractory articles
- GOST 20784-1975 Manganese ore concentrates and agglomerates. Methods of sampling and sample preparation for mechanical strength determination
- GOST 21554.3-1982 Sawn timber and blanks. Method for control of strength at bending, tension and compression
- GOST 20682-1975 Paper for corrugation. Method for determining the resistance of corrugated paper to flat compression (Concoro Medium Test)
- GOST 28686-1990 Corrugating paper. Method for determination of corrugating resistance to edge compression
- GOST 25.503-1997 Design calculation and strength testing. Methods of mechanical testing of metals. Method of compression testing
- GOST 29234.4-1991 Moulding sands. Method for determination of compressive strength in damp state
- GOST 25.503-1980 Strength calculation and testing. Methods of mechanical testing of metals. Methods of compression tests
- GOST 28570-1990 Concretes. Methods of strength evaluation on cores drilled from structures
- GOST R 57727-2017 Polymer composites. Determination of the nominal bearing strength under tension or compression loading
- GOST 32281.3-2013 Glass and glass products. Determination of the bending strength. Test with specimen supported at two points (four points bending)
- GOST ISO 4656-2013 Rubber compounding ingredients. Carbon black. Determination of oil absorption number (OAN) and oil absorption number of compressed sample (COAN)
- GOST 473.6-1981 Chemically resistant and heat resistant ceramic wares. The method for determination of compression strength
American Society for Testing and Materials (ASTM), Compressive strength samples
- ASTM C1323-96(2001)e1 Standard Test Method for Ultimate Strength of Advanced Ceramics with Diametrally Compressed C-Ring Specimens at Ambient Temperature
- ASTM C1323-96(2001) Standard Test Method for Ultimate Strength of Advanced Ceramics with Diametrally Compressed C-Ring Specimens at Ambient Temperature
- ASTM C1323-10 Standard Test Method for Ultimate Strength of Advanced Ceramics with Diametrally Compressed C-Ring Specimens at Ambient Temperature
- ASTM C1323-96 Standard Test Method for Ultimate Strength of Advanced Ceramics with Diametrally Compressed C-Ring Specimens at Ambient Temperature
- ASTM C39/C39M-20 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C39/C39M-17a Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C39/C39M-12 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C39/C39M-11a Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C39/C39M-01 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C39/C39M-99 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C39/C39M-05e1 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C39/C39M-05 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C39/C39M-03 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C39/C39M-04 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C39/C39M-04a Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C39/C39M-21 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C39/C39M-05e2 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C39/C39M-09 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C39/C39M-15 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C39/C39M-16a Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C39/C39M-16b Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C1194-18 Standard Test Method for Compressive Strength of Architectural Cast Stone
- ASTM C1194-91(1995) Standard Test Method for Compressive Strength of Architectural Cast Stone
- ASTM C1194-19 Standard Test Method for Compressive Strength of Architectural Cast Stone
- ASTM C1323-16 Standard Test Method for Ultimate Strength of Advanced Ceramics with Diametrally Compressed C-Ring Specimens at Ambient Temperature
- ASTM C109/C109M-20 Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)
- ASTM C109/C109M-20a Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)
- ASTM C1323-22 Standard Test Method for Ultimate Strength of Advanced Ceramics with Diametrally Compressed C-Ring Specimens at Ambient Temperature
- ASTM D3493-20 Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN)
- ASTM C364/C364M-06 Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions
- ASTM C364/C364M-16 Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions
- ASTM D2664-95a Standard Test Method for Triaxial Compressive Strength of Undrained Rock Core Specimens Without Pore Pressure Measurements
- ASTM D3493-19 Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN)
- ASTM D3493-06e1 Standard Test Method for Carbon Black-Oil Absorption Number of Compressed Sample (COAN)
- ASTM D3493-06 Standard Test Method for Carbon Black-Oil Absorption Number of Compressed Sample (COAN)
- ASTM D3493-18 Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN)
- ASTM D3493-19a Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN)
- ASTM D3493-01 Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample
- ASTM D3493-21 Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN)
- ASTM D3493-18a Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN)
- ASTM D2664-04 Standard Test Method for Triaxial Compressive Strength of Undrained Rock Core Specimens Without Pore Pressure Measurements
- ASTM D3493-14 Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN)
- ASTM D3493-16 Standard Test Method for Carbon Black&x2014;Oil Absorption Number of Compressed Sample (COAN)
- ASTM C495/C495M-12 Standard Test Method for Compressive Strength of Lightweight Insulating Concrete
- ASTM R0084 Ring Crush of Paperboard (This is not an ASTM standard; available as PDF, only)
- ASTM C773-88(1999) Standard Test Method for Compressive (Crushing) Strength of Fired Whiteware Materials
- ASTM C773-88(2011) Standard Test Method for Compressive (Crushing) Strength of Fired Whiteware Materials
- ASTM C773-88(2020) Standard Test Method for Compressive (Crushing) Strength of Fired Whiteware Materials
- ASTM C773-88(2016) Standard Test Method for Compressive (Crushing) Strength of Fired Whiteware Materials
- ASTM D3060-94(2005) Standard Test Method for Pressure Drop Rate of Compressed Gas-Propelled Products
- ASTM D3060-94(1999)e1 Standard Test Method for Pressure Drop Rate of Compressed Gas-Propelled Products
- ASTM D3060-94(2013) Standard Test Method for Pressure Drop Rate of Compressed Gas-Propelled Products
- ASTM C39/C39M-11 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C39/C39M-14a Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C39/C39M-15a Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C39/C39M-17b Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM D7012-04 Standard Test Method for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures
- ASTM B312-96(2002) Standard Test Method for Green Strength for Compacted Metal Powder Specimens
- ASTM B312-96 Standard Test Method for Green Strength for Compacted Metal Powder Specimens
- ASTM B312-09 Standard Test Method for Green Strength of Specimens Compacted from Metal Powders
- ASTM C39/C39M-10 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C39/C39M-09a Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM D3967-95a(2001) Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens
- ASTM D3967-95a Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens
- ASTM B528-99 Standard Test Method for Transverse Rupture Strength of Metal Powder Specimens
- ASTM D3967-95a(2004) Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens
- ASTM B528-16 Standard Test Method for Transverse Rupture Strength of Powder Metallurgy (PM) Specimens
- ASTM D3967-16 Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens
- ASTM D3148-02 Standard Test Method for Elastic Moduli of Intact Rock Core Specimens in Uniaxial Compression
- ASTM D3148-96 Standard Test Method for Elastic Moduli of Intact Rock Core Specimens in Uniaxial Compression
- ASTM E1012-05 Standard Practice for Verification of Test Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application
- ASTM C109/C109M-08 Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)
- ASTM C109/C109M-11 Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)
- ASTM D2938-95(2002) Standard Test Method for Unconfined Compressive Strength of Intact Rock Core Specimens
- ASTM D2938-95 Standard Test Method for Unconfined Compressive Strength of Intact Rock Core Specimens
- ASTM D7012-13 Standard Test Methods for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures
- ASTM B528-16(2020)e1 Standard Test Method for Transverse Rupture Strength of Powder Metallurgy (PM) Specimens
- ASTM D5034-95(2001) Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)
- ASTM D5034-95 Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)
- ASTM D5034-21 Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)
- ASTM D5034-09(2013) Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)
- ASTM D5520-94 Standard Test Method for Laboratory Determination of Creep Properties of Frozen Soil Samples by Uniaxial Compression
- ASTM D5520-18 Standard Test Method for Laboratory Determination of Creep Properties of Frozen Soil Samples by Uniaxial Compression
- ASTM D5520-11 Standard Test Method for Laboratory Determination of Creep Properties of Frozen Soil Samples by Uniaxial Compression
- ASTM D8289-19 Standard Test Method for Tensile Strength Estimate by Disc Compression of Manufactured Graphite
- ASTM D905-98 Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
- ASTM D5202-91(1997) Standard Test Method for Determining Triaxial Compression Creep Strength of Chemical Grouted Soils
- ASTM D8287/D8287M-22 Standard Test Method for Compressive Residual Strength Properties of Damaged Sandwich Composite Panels
- ASTM D5202/D5202M-16 Standard Test Method for Determining Triaxial Compression Creep Strength of Chemically Grouted Soils
- ASTM D8289-20 Standard Test Method for Tensile Strength Estimate by Disc Compression of Manufactured Graphite
- ASTM D4219-08 Standard Test Method for Unconfined Compressive Strength Index of Chemical-
Grouted Soils - ASTM D3549/D3549M-18(2023) Standard Test Method for Thickness or Height of Compacted Asphalt Mixture Specimens
- ASTM C109/C109M-11b Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)
- ASTM D5202-02 Standard Test Method for Determining Triaxial Compression Creep Strength of Chemical Grouted Soils
- ASTM C942-99(2004) Standard Test Method for Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory
- ASTM C942-99 Standard Test Method for Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory
- ASTM D905-08 Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
- ASTM D905-08(2021) Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
- ASTM D3931-08(2023) Standard Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading
- ASTM D5202-08 Standard Test Method for Determining Triaxial Compression Creep Strength of Chemical Grouted Soils
- ASTM D7012-07e1 Standard Test Method for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures
- ASTM D7012-14e1 Standard Test Methods for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures
- ASTM D905-03 Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
- ASTM D2095-96(2002) Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens
- ASTM D2095-96(2008) Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens
- ASTM D905-08e1 Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
- ASTM D7137/D7137M-12 Standard Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates
- ASTM C942-15 Standard Test Method for Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory
- ASTM D905-08(2013) Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
- ASTM D3549-03 Standard Test Method for Thickness or Height of Compacted Bituminous Paving Mixture Specimens
National Metrological Verification Regulations of the People's Republic of China, Compressive strength samples
Professional Standard - Building Materials, Compressive strength samples
- JC/T 262-1993 Performance test method for cast stone products. Compression strength test
Korean Agency for Technology and Standards (KATS), Compressive strength samples
- KS M 1424-2009 Testing method for compressive properties of media for water treatment
- KS F 2413-2000 Method of test for compressive strength of concrete using portions of beams broken in flexure
- KS L 3115-1-2010 Testing method for cold compressive strength of refractory bricks-Part 1:Test without packing
- KS L 3115-2-2012 Testing method for cold compressive strength of refractory bricks-Part 2:Test with packing
- KS L 3115-1-2015 Testing method for cold compressive strength of refractory bricks — Part 1: Test without packing
- KS F 2314-2013 Standard test method for unconfined compression test of soils
- KS M 3721-2008 Testing methods for strength properties of adhesives in shear by compression loading
- KS D ISO 5951:2004 Hot-rolled steel sheet of higher yield strength with improved formability
- KS L 5105-2007 Testing method for compressive strength of hydraulic cement mortar
- KS D ISO 5951:2013 Hot-rolled steel sheet of higher yield strength with improved formability
- KS M 3721-1987 Testing methods for strength properties of adhesives in shear by compression loading
- KS L 5105-1987 Testing method for compressive strength of hydraulic cement mortar
- KS F 2326-2002 Testing method for compressive strength of soil－cement using portions of beam broken in flexure
- KS F 2326-1982 Testing method for compressive strength of soil－cement using portions of beam broken in flexure
- KS L 3305-2012 Testing method for compressive strength of insulating fire bricks
- KS L 3305-1982 Testing method for compressive strength of insulating fire bricks
- KS L 3305-1987 Testing method for compressive strength of insulating fire bricks
- KS L ISO 10059-2-2013(2018) Dense, shaped refractory products — Determination of cold compressive strength — Part 2: Test with packing
- KS M ISO 12192:2004 Paper and board-Compressive strength(Ring crush method)
- KS M ISO 12192:2020 Paper and board — Determination of compressive strength Ring crush method
- KS M 7051-1997(2002) TESTING METHOD FOR RING CRUSH OF PAPERBOARD
- KS M ISO 12192:2014 Paper and board — Determination of compressive strength — Ring crush method
- KS M 3721-2008(2013) Testing methods for strength properties of adhesives in shear by compression loading
- KS M 7051-1982 TESTING METHOD FOR RING CRUSH OF PAPERBOARD
- KS F 2539-2005 Method for securing, preparing and testing specimens from hardened lightweight insulating concrete for compressive strength
- KS L 1601-2006 Fine ceramics(advanced ceramics, advanced technical ceramics)－Test method for compressive strength of monolithicceramics at room temperature
- KS F 2346-2017 Testing method for unconsolidated, undrained strength of cohesive soils in triaxial compression
- KS F 2346-1982 Testing method for unconsolidated, undrained strength of cohesive soils in triaxial compression
- KS F 2419-2007 Standard test method for making polyester resin concrete specimens for strength test
- KS L ISO 10059-2:2013 Dense, shaped refractory products — Determination of cold compressive strength — Part 2: Test with packing
- KS M ISO 6238:2008 Adhesives-Wood-to-wood adhesive bonds-Determination of shear strength by compression loading
- KS M ISO 6238:2013 Adhesives — Wood-to-wood adhesive bonds-Determination of shear strength by compression loading
- KS F 2346-2022 Test method for unconsolidated undrained strength of cohesive soils in triaxial compression test
- KS M ISO 4656-2017(2022) Rubber compounding ingredients — Carbon black — Determination of oil absorption number(OAN) and oil absorption number of compressed sample(COAN)
- KS E 3031-1977 Methods of sampling of rock and preparation of test piece for strength test
- KS M ISO 4656:2012 Rubber compounding ingredients－Carbon black－Determination of oil absorption number (OAN) and oil absorption number of compressed sample (COAN)
- KS M ISO 4656:2017 Rubber compounding ingredients — Carbon black — Determination of oil absorption number(OAN) and oil absorption number of compressed sample(COAN)
- KS M ISO 3597-3:2012 Textile-glass-reinforced plastics-Determination of mechanical properties on rods made of roving-reinforced resin-Part 3:Determination of compressive strength
- KS M ISO 14427:2010 Carbonaceous materials used in the production of aluminium－Cold and tepid ramming pastes－Preparation of unbaked test specimens and determination of apparent density after compaction
- KS M ISO 6238-2013(2018) Adhesives — Wood-to-wood adhesive bonds-Determination of shear strength by compression loading
- KS F 2539-1995 Method for securing,preparing and testing specimens from hardened lightweight insulating concrete for compressive strength
- KS F 2539-2005(2010) Method for securing, preparing and testing specimens from hardened lightweight insulating concrete for compressive strength
American National Standards Institute （ANSI), Compressive strength samples
- ANSI/TAPPI T826 om-2013 Short span compressive strength of containerboard
- ANSI/TAPPI T496 sp-2013 Specimen preparation for cross directional internal tearing resistance for paper, paperboard and related materials
- ANSI C78.LL 3-2003 Electric Lamps - Procedures for High Intensity Discharge Lamp - Sample Preparation and the Toxicity Characteristic Leaching Procedure
European Committee for Standardization (CEN), Compressive strength samples
- EN 772-1:2011 Methods of test for masonry units - Part 1: Determination of compressive strength (Incorporates Amendment A1: 2015)
- EN 13892-2:2002 Methods of test for screed materials - Part 2: Determination of flexural and compressive strength
- EN 772-1:2000 Methods of Test for Masonry Units - Part 1: Determination of Compressive Strength
- EN 12190:1998 Products and systems for the protection and repair of concrete structures - Test methods - Determination of compressive strength of repair mortar
- FprEN 17468-2-2021 Fibre-cement products - Determination of pull through and shear resistance and bending strength calculations - Part 2: Profiled sheets
- EN 6036:2015 Aerospace series - Fibre reinforced plastics - Test method - Determination of notched@ unnotched and filled hole compression strength
- EN 1094-5:1995 Insulating Refractory Products - Part 5: Determination of Cold Crushing Strength
- EN 2563:1997 Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates - Determination of the apparent interlaminar shear strength
Taiwan Provincial Standard of the People's Republic of China, Compressive strength samples
- CNS 13959-1997 Method of test for compressive strength of fine ceramics
- CNS 12107-1987 Method of Test for Flat Crush of Corrugating Medium ( CMT Test )
- CNS 12384-1988 Method of Test for Unconfined Compressive Strength of Cohesive Soil
- CNS 3511-1991 Method of Test for Compression Strength of Corrugated Paperboard Containers
- CNS 5809-1980 Methods of Test for Strength Properties of Adhesives in Shear by Compression Loading
- CNS 9531-1982 Method of Test for Triaxial Compressive Strength of Undrained Rock Core Specimens Without Pore Pressure Measurements
ES-AENOR, Compressive strength samples
International Organization for Standardization (ISO), Compressive strength samples
- ISO 12192:2011 Paper and board - Determination of compressive strength - Ring crush method
- ISO/DIS 7763:1964 Testing of paper and board — Compressive strength of an in s-shape fixed sample
- ISO 12817:2013 Fibre-reinforced plastic composites - Determination of open-hole compression strength
- ISO 12817:2012 Fibre-reinforced plastic composites - Determination of open-hole compression strength
- ISO 12192:2002 Paper and board - Compressive strength - Ring crush method
- ISO 7373:1987 Ferroalloys; Experimental methods for checking the precision of sample division
- ISO 5082:1982 Textiles; Woven fabrics; Determination of breaking strength; Grab method
- ISO 6894:1984 Rubber compounding ingredients — Carbon black — Preparation of samples for determination of dibutylphthalate absorption number (compressed sample)
- ISO 3605:1987 Textile glass; Rovings; Determination of compressive strength of rod composites
- ISO 105-E13:1987 Textiles; Tests for colour fastness; Part E13 : Colour fastness to acid-felting : Severe
- ISO 22685:2021 Refractory products — Determination of compressive strength at elevated temperature
- ISO 6238:2001 Adhesives - Wood-to-wood adhesive bonds - Determination of shear strength by compressive loading
- ISO 6238:1987 Adhesives; Wood-to-wood adhesive bonds; Determination of shear strength by compression loading
- ISO 6238:2018 Adhesives - Wood-to-wood adhesive bonds - Determination of shear strength by compressive loading
- ISO 13061-5:2020 Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 5: Determination of strength in compression perpendicular to grain
- ISO 8895:1986 Shaped insulating refractory products; Determination of cold crushing strength
- ISO 8895:2004 Shaped insulating refractory products - Determination of cold crushing strength
- ISO 3597-3:2003 Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 3: Determination of compressive strength
- ISO 14427:2004 Carbonaceous materials used in the production of aluminium - Cold and tepid ramming pastes - Preparation of unbaked test specimens and determination of apparent density after compaction
German Institute for Standardization, Compressive strength samples
- DIN 5014:2019 Testing of paper and board - Compressive strength of an in s-shape fixed sample
- DIN 5014:2019-04 Testing of paper and board - Compressive strength of an in s-shape fixed sample
- DIN SPEC 16457:2019-12 Short fiber reinforced thermoplastics - Tension-compression-shear test with tube specimens under cyclic loading
- DIN 18141-1:2014-05 Subsoil - Analysis of rock samples - Part 1: Determination of the unconfined compressive strength
- DIN EN ISO 295:2004-05 Plastics - Compression moulding of test specimens of thermosetting materials (ISO 295:2004); German version EN ISO 295:2004
- DIN EN ISO 293:2023-06 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023); German version EN ISO 293:2023
- DIN 48085-2:1985 Compression connectors, restistant to high tensile stresses, for aluminium-conductors
- DIN EN 17224:2019-09 Determination of compressive shear strength of wood adhesives at elevated temperatures; German version EN 17224:2019
- DIN 51910:2009 Testing of carbonaceous materials - Determination of compressive strength - Solid materials
- DIN EN 17224:2019 Determination of compressive shear strength of wood adhesives at elevated temperatures
- DIN 52376:2016-07 Testing of plywood - Determination of compression strength parallel to the surfaces
- DIN EN 12390-3:2019 Testing hardened concrete - Part 3: Compressive strength of test specimens
- DIN 52376:1978 Testing of plywood; determination of compression strength parallel to the surfaces
- DIN 52376:2016 Testing of plywood - Determination of compression strength parallel to the surfaces
- DIN EN 12390-4:2000 Testing hardened concrete - Part 4: Compressive strength; Specification for testing machines; German version EN 12390-4:2000
- DIN EN 6038:2016 Aerospace series - Fibre reinforced plastics - Test method - Determination of the compression strength after impact; German and English version EN 6038:2015
- DIN 18141-1:2014 Subsoil - Analysis of rock samples - Part 1: Determination of the unconfined compressive strength
- DIN EN 12390-3:2019-10 Testing hardened concrete - Part 3: Compressive strength of test specimens; German version EN 12390-3:2019
- DIN EN 17468-2:2020 Fibre cement products - Determination of pull through and shear resistance and bending strength calculations - Part 2: Profiled sheets; German and English version prEN 17468-2:2020
- DIN EN 17468-2:2022 Fibre-cement products - Determination of pull through and shear resistance and bending strength calculations - Part 2: Profiled sheets
- DIN EN ISO 8895:2006-09 Shaped insulating refractory products - Determination of cold crushing strength (ISO 8895:2004); German version EN ISO 8895:2006
- DIN 18137-2:2011 Soil, investigation and testing - Determination of shear strength - Part 2: Triaxial test
- DIN EN 13892-2:2003-02 Methods of test for screed materials - Part 2: Determination of flexural and compressive strength; German version EN 13892-2:2002
- DIN EN 658-4:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 4: Determination of interlaminar shear strength by compression loading of notched test specimens; German version EN 658-4:2003
- DIN EN ISO 8895:2006 Shaped insulating refractory products - Determination of cold crushing strength (ISO 8895:2004); English version of DIN EN ISO 8895:2006-09
- DIN EN ISO 293:2023-10 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023); German version EN ISO 293:2023
- DIN EN 658-4:2003-05 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 4: Determination of interlaminar shear strength by compression loading of notched test specimens; German version EN 658-4:2003
- DIN EN 1894:2005-07 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of shear strength by compression loading of notched specimens; German version EN 1894:2005
- DIN EN 2563:1997 Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates; determination of apparent interlaminar shear strength; German version EN 2563:1997
PT-IPQ, Compressive strength samples
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Compressive strength samples
- GB/T 1964-1996 Test method for crushing strength of porous ceramic
- GB/T 8489-2006 Test method for compressive strength of fine ceramics (advanced ceramics,advanced technical ceramics)
- GB/T 8489-1987 Testing method for compressive (crushing) strength of hing performance ceramics
- GB/T 2679.10-1993 paper and board. Compressive strength. Short span test
- GB/T 6525-1986 Sintered metal materials--Determination of compression strength at room temperature
- GB/T 28371-2012 Ferroalloys.Experimental methods for checking the precision of sample division
- GB/T 11106-1989 Metallic powder--Determination of green strength by compression of cylinder compacts
- GB/T 11177-1989 Testing method for compressive shear strength of dowel joint by inorganic adhesives
- GB 11177-1989 Inorganic adhesive socket compression scissors strength test method
- GB/T 42910-2023 Test method for high temperature compressive shear strength of inorganic adhesives
- GB/T 17517-1998 Adhesives--Wood to wood adhesive bonds--Determination of shear strength by compression loading
- GB/T 25044-2010 General request of the preparation equipment used in compressive strength test of wall bricks
- GB/T 14209-1993 Textile glass--Rovings--Determination of compressive strength of rod composites
- GB/T 9327.5-1988 Test methods for compression and mechanical connectorsfor conductors of power cables--Method of tensile strength testing
- GB/T 14208.3-2009 Textile-glass-reinforced plastics.Determination of mechanical properties on rods made of roving-reinforced resin.Part 3:Determination of compressive strength
- GB/T 3997.2-1998 Shaped insulating refractory products--Determination of cold crushing strength
Professional Standard - Aerospace, Compressive strength samples
- QJ 1634A-1996 Test method for compressive shear strength of adhesives
YU-JUS, Compressive strength samples
UY-UNIT, Compressive strength samples
Hebei Provincial Standard of the People's Republic of China, Compressive strength samples
- DB13/T 2757-2018 Technical specification for cotton sample compression baling device
British Standards Institution (BSI), Compressive strength samples
- BS EN 16210:2013 Transportation loads. Measurement and evaluation of climatic and other loads. Data acquisition and general requirements for measuring equipment
- BS ISO 12817:2013 Fibre-reinforced plastic composites. Determination of open-hole compression strength
- BS ISO 13061-5:2020 Physical and mechanical properties of wood. Test methods for small clear wood specimens - Determination of strength in compression perpendicular to grain
- BS EN 12390-3:2002 Testing hardened concrete - Compressive strength of test specimens
- BS 2782-9 Met 902A:1992 Methods of testing plastics. Sampling and test specimen preparation.. Compression moulding test specimens of thermosetting materials
- BS EN 12808-3:2008 Grouts for tiles - Determination of flexural and compressive strength
- BS EN 1052-1:1999 Methods of test for masonry - Determination of compressive strength
- BS EN 17224:2019 Determination of compressive shear strength of wood adhesives at elevated temperatures
- BS EN 12390-3:2019 Tracked Changes. Testing hardened concrete. Compressive strength of test specimens
- BS EN 1912:2004 Structural timber - Strength classes - Assignment of visual grades and species
- 22/30445226 DC BS EN ISO 293. Plastics. Compression moulding of test specimens of thermoplastic materials
- BS EN ISO 293:2023 Tracked Changes. Plastics. Compression moulding of test specimens of thermoplastic materials
- BS EN 6038:2015 Aerospace series. Fibre reinforced plastics. Test method. Determination of the compression strength after impact
- BS 5293-19:1991 Sampling and testing carbon black for use in the rubber industry - Preparation of samples for determination of dibutyl phthalate absorption number (compressed sample)
- BS ISO 18352:2009 Carbon-fibre-reinforced plastics - Determination of compression-after-impact properties at a specified impact-energy level
- BS EN 12190:1999 Products and systems for the protection and repair of concrete structures - Test methods - Determination of compressive strength of repair mortar
- BS ISO 3597-3:2003 Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Determination of compressive strength
- BS EN 12390-2:2000 Testing hardened concrete - Making and curing specimens for strength tests
- BS EN 12390-2:2009 Testing hardened
concrete
Part 2: Making and curing specimens
for strength tests
- BS EN 12390-18:2021 Testing hardened
concrete
Part 2: Making and curing specimens
for strength tests
- BS EN 12390-17:2019 Testing hardened
concrete
Part 2: Making and curing specimens
for strength tests
- BS EN 12390-16:2019 Testing hardened
concrete
Part 2: Making and curing specimens
for strength tests
- BS EN 12390-15:2019 Testing hardened
concrete
Part 2: Making and curing specimens
for strength tests
- BS EN 12390-12:2020 Testing hardened
concrete
Part 2: Making and curing specimens
for strength tests
- BS ISO 6238:2018 Adhesives. Wood-to-wood adhesive bonds. Determination of shear strength by compressive loading
- BS EN 1097-11:2013 Tests for mechanical and physical properties of aggregates. Determination of compressibility and confined compressive strength of lightweight aggregates
- BS EN ISO 10123:2019 Adhesives. Determination of shear strength of anaerobic adhesives using pin-and-collar specimens
- BS ISO 22685:2021 Refractory products. Determination of compressive strength at elevated temperature
- 20/30408795 DC BS ISO 24126. Refractory products. Determination of compressive strength at elevated temperature
- 15/30273224 DC BS ISO 13061-5. Physical and mechanical properties of wood. Test methods for small clear wood specimens. Part 5. Determination of strength in compression perpendicular to grain
- 18/30369622 DC BS ISO 13061-5. Physical and mechanical properties of wood. Test methods for small clear wood specimens. Part 5. Determination of strength in compression perpendicular to grain
- BS ISO 4656:2012 Rubber compounding ingredients. Carbon black. Determination of oil absorption number (OAN) and oil absorption number of compressed sample (COAN)
- BS ISO 20975-1:2023 Fibre-reinforced plastic composites. Determination of laminate of through-thickness properties - Direct tension and compression tests
- BS EN ISO 8895:2006 Shaped insulating refractory products - Determination of cold crushing strength
VN-TCVN, Compressive strength samples
- TCVN 4032-1985 Cements.Test methods of bending and compression strengths
Professional Standard - Machinery, Compressive strength samples
- JB/T 9141.3-1999 Test method for compressive strength of flexible graphite sheets
- JB/T 9141.3-2013 Flexible graphite sheets.Part 3: Test method for compressive strength
- JB/T 8133.8-1999 Test method for physical-chemical properties of electrical carbon product.Compressive strength
AENOR, Compressive strength samples
- UNE 83508:2004 Concrete with fibers. Determination of the index of tenacity in compression.
- UNE 103400:1993 SIMPLE COMPRESSION RUPTURE TEST IN SOIL TEST SPECIMENS.
- UNE 40402:1981 COMPRESSING STRENGHT AND ELASTIC RECOVERY OF TEXTILE FLOOR COVERINGS THICKNESS
- UNE 56535:1977 PHYSICAL-MECHANICAL CHARACTERISTICS OF WOOD. DETERMINATION OF AXIAL COMPRESSION STRENGH.
- UNE 137002:2003 Corrugated fibreboard packaging. Determination of the manufacturers joint strength. Comprenssion method.
- UNE-EN 12390-3:2009 Testing hardened concrete - Part 3: Compressive strength of test specimens
- UNE-EN 1097-11:2013 Tests for mechanical and physical properties of aggregates - Part 11: Determination of compressibility and confined compressive strength of lightweight aggregates
Indonesia Standards, Compressive strength samples
- SNI 03-6430.1-2000 Test methods for compressive strength of grouts for preplaced-aggregate concrete in the laboratory
- SNI 03-6898-2002 Manual for work on taking and testing of compressive strength of core concretes
国家市场监督管理总局、中国国家标准化管理委员会, Compressive strength samples
- GB/T 6525-2019 Determination of compression strength for sintered metal materials at room temperature
- GB/T 11106-2022 Metallic powder—Determination of green strength by compression of cylinder compacts
BE-NBN, Compressive strength samples
ZA-SANS, Compressive strength samples
- SANS 5863:2006 Concrete tests - Compressive strength of hardened concrete
The American Road & Transportation Builders Association, Compressive strength samples
- AASHTO T 226-1990 Standard Method of Test for Triaxial Compressive Strength of Undrained Rock Core Specimens without Pore Pressure Measurements
- AASHTO T 22-2010 Standard Method of Test for Compressive Strength of Cylindrical Concrete Specimens
- AASHTO T 22-2014 Standard Method of Test for Compressive Strength of Cylindrical Concrete Specimens
- AASHTO T 296-2010 Standard Method of Test for Unconsolidated, Undrained Compressive Strength of Cohesive Soils in Triaxial Compression
- AASHTO T 296-1995 Standard Method of Test for Unconsolidated, Undrained Compressive Strength of Cohesive Soils in Triaxial Compression HM-22; Part IIA R(2000)
- AASHTO T 106M_T 106-2007 Standard Method of Test for Compressive Strength of Hydraulic Cement Mortar (Using 50-mm or 2-in. Cube Specimens)
未注明发布机构, Compressive strength samples
- DIN EN ISO 293:2003 Plastics — Compression molding test specimens of thermoplastic materials
- DIN EN 12504-1:2019 Testing of concrete in structures – Part 1: Core samples – Production, examination and testing of compressive strength
- BS 6319-2:1983(2011) Testing of resin compositions for use in construction — Part 2 : Method for measurement of compressive strength
- DIN EN 1015-11:1999 Test method for mortar for masonry DIN Part 11: Determination of bending tensile and compressive strength
- BS EN 1094-5:1995(1999) Insulating refractory products — Part 5 : Determination ofcold crushing strength
Group Standards of the People's Republic of China, Compressive strength samples
- T/CSEB 0004-2018 Testing method for determining the dynamic unaxial compression strength of rock materials
- T/CSTM 00278-2021 Ring compression test method for strength and stress-strain relationship of metallic materials
- T/CECS 726-2020 Technical specification for testing the compressive strength of sleeve grouting materials for steel bar connections by sampling method
BR-ABNT, Compressive strength samples
GOSTR, Compressive strength samples
- GOST 12248.2-2020 Soils. Deformation of strength parameters by unconfined compression testing
- GOST 12248.3-2020 Soils. Determination of strength and deformation parameters by triaxial compression testing
- GOST 28570-2019 Concretes. Methods of strength determination on cores selected from structures
KR-KS, Compressive strength samples
- KS M ISO 12192-2020 Paper and board — Determination of compressive strength Ring crush method
- KS D ISO 14317-2012 Sintered metal materials excluding hardmetals－Determination of compressive yield strength
- KS M ISO 4656-2017 Rubber compounding ingredients — Carbon black — Determination of oil absorption number(OAN) and oil absorption number of compressed sample(COAN)
Professional Standard - Aviation, Compressive strength samples
- HB 5434.5-1989 Test method for compressive strength of aircraft wheel brake materials
- HB 5434.5-2004 Test methods for aircraft wheel friction materials-Part 5:Test method for compressive strength
Professional Standard - Military and Civilian Products, Compressive strength samples
- WJ 745-1994 Test method for compressive shear strength of adhesives for optical instruments
ES-UNE, Compressive strength samples
- UNE-EN 17224:2020 Determination of compressive shear strength of wood adhesives at elevated temperatures
- UNE-EN 1894:2005 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of shear strength by compression loading of notched specimens (Endorsed by AENOR in June of 2005.)
- UNE-EN 6038:2015 Aerospace series - Fibre reinforced plastics - Test method - Determination of the compression strength after impact (Endorsed by AENOR in January of 2016.)
- UNE-EN 12390-3:2020 Testing hardened concrete - Part 3: Compressive strength of test specimens
- UNE-EN 6036:2015 Aerospace series - Fibre reinforced plastics - Test method - Determination of notched, unnotched and filled hole compression strength (Endorsed by AENOR in January of 2016.)
- UNE-EN 658-4:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 4: Determination of interlaminar shear strength by compression loading of notched test specimens (Endorsed by AENOR in March of 2003.)
NEMA - National Electrical Manufacturers Association, Compressive strength samples
- NEMA LL 3-1997 Procedures for High-Intensity Discharge Lamp Sample Preparation and the TCLP
National Electrical Manufacturers Association（NEMA), Compressive strength samples
- NEMA LL 3-1999 Procedures for High-Intensity Discharge Lamp Sample Preparation and the TCLP
- NEMA C78.LL 3-2003 Electric Lamps - Procedures for High Intensity Discharge Lamp Sample Preparation and the Toxicity Characteristic Leaching Procedure
NL-NEN, Compressive strength samples
- NEN 5968-1988 Concrete and mortar- Determination of the compressive strength of test specimens
Association of German Mechanical Engineers, Compressive strength samples
- DVS 2709-1983 Resistance spot welded samples for the determination of the fatigue strength
NZ-SNZ, Compressive strength samples
- NZS 4402.6.2.1:1986 Methods of Testing Soils for Civil Engineering Purposes Part 6.2: Soil Strength Tests - Determination of the Compressive Strength of Specimens Tested in Undrained Triaxial Compression Test 6.2.1: Method without Measurement of Pore Water Pressure
CEN - European Committee for Standardization, Compressive strength samples
- PREN 17224-2018 Determination of compressive shear strength of wood adhesives at elevated temperatures
- PREN 12390-3-2017 Testing hardened concrete - Part 3: Compressive strength of test specimens
轻工业部, Compressive strength samples
- QB 1093-1991 Determination of along-grain compression and shear strength of furniture solid wood glue joints
IN-BIS, Compressive strength samples
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Compressive strength samples
- GB/T 35160.3-2017 Test methods for agglomerated stone—Part 3：Determination of compressive strength
Society of Automotive Engineers (SAE), Compressive strength samples
- SAE AMS3843-1962 POLYTETRAFLUOROETHYLENE SHEET TFE Fluorocarbon Resin, Asbestos Fiber Reinforced High Compressibility
- SAE AMS3843B-1986 POLYTETRAFLUOROETHYLENE SHEET Asbestos Fiber Reinforced High Compressibility, Low Density
- SAE AMS3843C-1995 POLYTETRAFLUOROETHYLENE SHEET Asbestos Fiber Reinforced High Compressibility, Low Density
- SAE AMS3843A-1976 POLYTETRAFLUOROETHYLENE SHEET Asbestos Fiber Reinforced High Compressibility, Low Density
- SAE AMS3843C-1986 Polytetrafluoroethylene Sheet-Asbestos Fiber Reinforced High Compressibility, Low Density
- SAE AMS3656G-2010 Polytetrafluoroethylene (PTFE) Extrusions, Normal Strength, As Sintered
- SAE AMS3659E-2010 Polytetrafluoroethylene (PTFE) Extrusions, Premium Strength, Sintered and Stress-Relieved
- SAE AMS3657E-2010 Polytetrafluoroethylene (PTFE) Extrusions, Premium Strength, As Sintered
SAE - SAE International, Compressive strength samples
- SAE AMS3843C-1991 Polytetrafluoroethylene Sheet Asbestos Fiber Reinforced High Compressibility@ Low Density
- SAE AMS3843D-2014 Polytetrafluoroethylene Sheet Asbestos Fiber Reinforced High Compressibility@ Low Density
Lithuanian Standards Office , Compressive strength samples
- LST EN 12390-3-2009 Testing hardened concrete - Part 3: Compressive strength of test specimens
- LST EN 12390-3-2009/AC-2011 Testing hardened concrete - Part 3: Compressive strength of test specimens
- LST 1551.1-1999/1K-2002 Concrete articles for tiding surroudings. Testing methods. Determination of compressive and tensile strength
- LST 1551.1-1999 Concrete articles for tiding surroudings. Testing methods. Determination of compressive and tensile strength
- LST EN 1894-2005 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of shear strength by compression loading of notched specimens
- LST EN 658-4-2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 4: Determination of interlaminar shear strength by compression loading of notched test specimens
Danish Standards Foundation, Compressive strength samples
- DS/EN 12390-3+AC:2013 Testing hardened concrete - Part 3: Compressive strength of test specimens
- DS/EN ISO 8895:2006 Shaped insulating refractory products – Determination of cold crushing strength
- DS/ENV 658-4:1993 Advanced technical ceramic. Mechanical properties of ceramic composites at room temperature. Part 4: Determination of shear strength by compression loading of notched specimens
- DS 423.21:1984 Testing of concrete, Making and curing of moulded test specimens for strength tests
- DS/EN 1894:2005 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of shear strength by compression loading of notched specimens
- DS/EN 658-4:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 4: Determination of interlaminar shear strength by compression loading of notched test specimens
Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Compressive strength samples
- GJB 5382.14-2005 Test methods of physical parameter for pyrotechnic. Part 14: Determination of crushing strength Compression method
Military Standard of the People's Republic of China-General Armament Department, Compressive strength samples
- GJB 8683.14-2015 Test methods for physical parameters of pyrotechnics Part 14: Compression method for determination of compressive strength
AASHTO - American Association of State Highway and Transportation Officials, Compressive strength samples
- T 22-2007 Standard Method of Test for Compressive Strength of Cylindrical Concrete Specimens
- T 22-2014 Standard Method of Test for Compressive Strength of Cylindrical Concrete Specimens
- T 22-2010 Standard Method of Test for Compressive Strength of Cylindrical Concrete Specimens
- T 296-2005 Standard Method of Test for Unconsolidated@ Undrained Compressive Strength of Cohesive Soils in Triaxial Compression
- T 296-2010 Standard Method of Test for Unconsolidated@ Undrained Compressive Strength of Cohesive Soils in Triaxial Compression
- TP20-1993 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens (Edition 1A)
- T 296-1995 Standard Method of Test for Unconsolidated@ Undrained Compressive Strength of Cohesive Soils in Triaxial Compression (Twentieth Edition)
- T22-1992 Standard Specification for Compressive Strength of Cylindrical Concrete Specimens (Eighteenth Edition; ASTM C39-86)
- T 296-1994 Standard Method of Test for Unconsolidated@ Undrained Compressive Strength of Cohesive Soils in Triaxial Compression (Eighteenth Edition)
- T 226-1990 Standard Method of Test for Triaxial Compressive Strength of Undrained Rock Core Specimens without Pore Pressure Measurements
- T 22-2006 Standard Method of Test for Compressive Strength of Cylindrical Concrete Specimens (ASTM Designation: C 39-04a)
- T 22-2003 Standard Method of Test for Compressive Strength of Cylindrical Concrete Specimens (ASTM Designation: C 39-99)
- T 22-2005 Standard Method of Test for Compressive Strength of Cylindrical Concrete Specimens (ASTM Designation: C 39-04a)
API - American Petroleum Institute, Compressive strength samples
- API REPORT 07714-CAP-1998 Strength of Simple Joints - Effect of Chord Stress and Diameter-to-Thickness Ratio on the Static Strength of DT Tubular Joints Loaded in Brace Compression
Professional Standard - Ferrous Metallurgy, Compressive strength samples
- YBJ 209-1986 Technical specification for determination of compressive strength of structural concrete by core sampling method
TH-TISI, Compressive strength samples
- TIS 1709-1998 Rubber compounding ingredients.carbon black.preparation of samples for determination of dibutylphthalate absorption number (compressed sample)
European Association of Aerospace Industries, Compressive strength samples
- AECMA PREN 6038-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of the Compression Strength After Impact Edition P1
机械工业部, Compressive strength samples
- JB/T 56114.3-1996 Enameled round winding wire product quality grade high strength acetal enameled copper round wire
GM Daewoo, Compressive strength samples
- GMKOREA EDS-T-7658-2011 Test Method for Determining the Breaking Strength of Components Made from Compressed Fibrous Materials
AT-ON, Compressive strength samples
- ONORM ENV 658-4-1993 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 4: Determination of shear strength by compression loading of notched specimens
- ONORM B 3124 Teil.2-1981 Testing of natural stone; Mechanical properties of rock; Uniaxial compressive strength of cubical specimens
- ONORM B 3124 Teil.1-1981 Testing ot natural stone; Mechanical properties of rock; Uniaxial compressive strength ot cylindrical specimens
Canadian General Standards Board （CGSB), Compressive strength samples
GM Global, Compressive strength samples
- GMW 14774-2013 Test Method for Determining the Breaking Strength of Components made from Compressed Fibrous Materials Issue 2; English
Professional Standard - Geology, Compressive strength samples
- DZ/T 0276.20-2015 Regulation for testing the physical and mechanical properties of rock.Part 20:Test for determining the strength of rock in triaxial compression
ESDU - Engineering Sciences Data Unit, Compressive strength samples
- ESDU 74038 A-1983 Effect of an axial compressive mean stress on the fatigue strength of aluminium alloy bar (plain and notched).