scratch meter scratch

scratch meter scratch, Total:283 items.

In the international standard classification, scratch meter scratch involves: Medical equipment, Plastics, Mechanical testing, Surface treatment and coating, Paints and varnishes, Furniture, Testing of metals, Paint ingredients, Construction materials, Graphic technology, Non-textile floor coverings, Ceramics, Structure and structure elements, Corrosion of metals, Earthworks. Excavations. Foundation construction. Underground works, Linear and angular measurements, Road vehicles in general, Insulating materials, Non-ferrous metals, Shipbuilding and marine structures in general, Technical drawings, Optical equipment, Protection against crime, Cutting tools, Materials for aerospace construction, Non-destructive testing, Metrology and measurement in general.

National Metrological Technical Specifications of the People's Republic of China, scratch meter scratch

JJF(石化) 009-2018 Calibration Specification for Scratch Testers
JJF(石化)009-2018 Calibration Specification for Scratch Testers
JJF(机械) 1014-2018 Calibration specification for tracking index tester
JJF(机械)1014-2018 Calibration specification for tracking index tester

Korean Agency for Technology and Standards (KATS), scratch meter scratch

KS P 2105-2010 Scarificators
KS M ISO 17541:2016 Plastics － Quantitative evaluation of scratch-induced damage and scratch visibility
KS M ISO 17541-2016(2021) Plastics － Quantitative evaluation of scratch-induced damage and scratch visibility
KS M ISO 17541-2021 Plastics － Quantitative evaluation of scratch-induced damage and scratch visibility
KS M ISO 19252:2014 Plastics — Determination of scratch properties
KS M ISO 19252:2019 Plastics — Determination of scratch properties
KS L ISO 15695:2001 Vitreous and porcelain enamels－Determination of scratch resistance of enamel finishes
KS D 9535-2006 Evaluation of Adhesion/Cohesion of Plasma Sprayed Ceramic Coatings by Scratch Testing
KS F 2516-2007 Method of test for content of soft particles in coarse aggregate by scratching
KS D 0294-2009 Standard method for the evaluation of repassivation rate of stainless steel components using laboratory scratch test
KS F 2516-1985 Method of test for content of soft particles in coarse aggregate by scratching
KS L ISO 20502:2012 Fine ceramics－Determination of adhesion of ceramic coatings by scratch testing
KS L ISO 20502-2012(2022) Fine ceramics－Determination of adhesion of ceramic coatings by scratch testing
KS L ISO 20502-2012(2017) Fine ceramics－Determination of adhesion of ceramic coatings by scratch testing
KS D 9535-2016(2021) Evaluation of Adhesion/Cohesion of Plasma Sprayed Ceramic Coatings by Scratch Testing
KS L ISO 20502-2022 Fine ceramics－Determination of adhesion of ceramic coatings by scratch testing
KS B 0950-2019 Metallic materials－Instrumented indentation test for indentation tensile properties
KS B 0950-2009(2019) Metallic materials－Instrumented indentation test for indentation tensile properties
KS M ISO 20566:2011 Paints and varnishes-Determination of the scratch resistance of a coating system using a laboratory car-wash
KS M ISO 20566:2013 Paints and varnishes ㅡ Determination of the scratch resistance of a coating system using a laboratory car-wash
KS D 9535-2016 Evaluation of Adhesion/Cohesion of Plasma Sprayed Ceramic Coatings by Scratch Testing
KS D 9535-2021 Evaluation of Adhesion/Cohesion of Plasma Sprayed Ceramic Coatings by Scratch Testing
KS L ISO 603-8-2014(2019) Bonded abrasive products — Dimensions — Part 8: Grinding wheels for deburring and fettling/snagging
KS D 0294-2023 Standard method for the evaluation of repassivation rate of stainless steel components using laboratory scratch test
KS B ISO 10110-4:2007 Optics and optical instruments－Preparation of drawings for optical elements and systems－Part 4：Material imperfections－Inhomogeneity and striae
KS D 0294-2018 Standard method for the evaluation of repassivation rate of stainless steel components using laboratory scratch test

(U.S.) Ford Automotive Standards, scratch meter scratch

FORD FLTM BN 108-13-2001 RESISTANCE TO SCRATCHING
FORD FLTM BO 162-01-2009 RESISTANCE TO SCRATCH AND MARR
FORD WSS-M6J175-A-1997 PRIMER SURFACER, 130 C BAKING TEMPERATURE, CHIP AND SCRATCH INHIBITING, REPAIR PARTS
FORD WSS-M6J152-B1-2008 PRIMER SURFACER, MODIFIED POLYESTER, CHIP AND SCRATCH INHIBITING ***TO BE USED WITH FORD WSS-M99P1111-A***

British Standards Institution (BSI), scratch meter scratch

BS ISO 17541:2014 Plastics. Quantitative evaluation of scratch-induced damage and scratch visibility
BS EN 15186:2012 Furniture. Assessment of the surface resistance to scratching
BS PD CEN/TS 16611:2014 Furniture. Assessment of the surface resistance to microscratching
BS PD CEN/TS 16611:2016 Furniture. Assessment of the surface resistance to microscratching
BS 131-6:1998 Notched bar tests - Method for precision determination of Charpy V-notch impact energies for metals
BS EN ISO 1518:1992 Paints and varnishes. Scratch test
BS 131-7:1998 Notched bar tests - Specification for verification of the test machine used for precision determination of Charpy V-notch impact energies for metals
BS EN 13523-12:2004 Coil coated metals - Test methods - Resistance to scratching
BS PD CEN/TS 17629:2021 Nanotechnologies. Nano- and micro- scale scratch testing
BS EN 16094:2012 Laminate floor coverings. Test method for the determination of micro-scratch resistance
BS EN ISO 22557:2020 Paints and varnishes. Scratch test using a spring-loaded pen
BS EN ISO 15695:2001 Vitreous and porcelain enamels - Determination of scratch resistance of enamel finishes
BS EN ISO 20567-1:2005 Paints and varnishes - Determination of stone-chip resistance of coatings - Multi-impact testing
BS EN ISO 6769:2022 Vitreous and porcelain enamels. Determination of surface scratch hardness according to the Mohs scale
BS EN 15771:2010 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale
BS EN ISO 20566:2013 Paints and varnishes. Determination of the scratch resistance of a coating system using a laboratory-scale car-wash
BS EN ISO 20566:2021 Paints and varnishes. Determination of the scratch resistance of a coating system using a laboratory-scale car-wash
22/30436770 DC BS ISO 6769. Vitreous and porcelain enamels. Determination of surface scratch hardness according to the Mohs scale
BS EN ISO 20567-2:2005 Paints and varnishes - Determination of stone-chip resistance of coatings - Single-impact test with a guided impact body
BS EN ISO 20567-2:2017 Paints and varnishes. Determination of stone-chip resistance of coatings. Single-impact test with a guided impact body
PD ISO/TR 29381:2008 Metallic materials. Measurement of mechanical properties by an instrumented indentation test. Indentation tensile properties
BS ISO 27307:2015 Thermal spraying. Evaluation of adhesion/cohesion of thermal sprayed ceramic coatings by transverse scratch testing
BS ISO 14577-5:2022 Metallic materials. Instrumented indentation test for hardness and materials parameters - Linear elastic dynamic instrumented indentation testing (DIIT)
BS EN 4864:2020 Aerospace series. Environmental testing. High dynamic abrasion, mar, scratch and punch test in cabin interior
BS EN ISO 20502:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of adhesion of ceramic coatings by scratch testing
BS EN ISO 17872:2019 Paints and varnishes. Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing

International Organization for Standardization (ISO), scratch meter scratch

ISO 17541:2014 Plastics - Quantitative evaluation of scratch-induced damage and scratch visibility
ISO 19252:2008 Plastics - Determination of scratch properties
ISO/CD 19252:2023 Plastics — Determination of scratch properties
ISO 1518:1973 Paints and varnishes — Scratch test
ISO 1518:1992 Paints and varnishes; scratch test
ISO 15695:2000 Vitreous and porcelain enamels - Determination of scratch resistance of enamel finishes
ISO 22557:2019 Paints and varnishes — Scratch test using a spring-loaded pen
ISO 15695:2000/cor 1:2000 Vitreous and porcelain enamels - Determination of scratch resistance of enamel finishes; Technical Corrigendum 1
ISO 6769:2022 Vitreous and porcelain enamels — Determination of surface scratch hardness according to the Mohs scale
ISO 17872:2007 Paints and varnishes - Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing
ISO 20566:2005 Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory car-wash
ISO 20566:2013 Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory-scale car-wash
ISO/TR 29381:2008 Metallic materials - Measurement of mechanical properties by an instrumented indentation test - Indentation tensile properties
ISO 10110-4:1997 Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 4: Material imperfections - Inhomogeneity and striae
ISO/CD 13060:2024 An adhesion evaluation method for microcircuits on PCB (Printed Circuit Board) by scratch test
ISO 27307:2015 Thermal spraying - Evaluation of adhesion/cohesion of thermal sprayed ceramic coatings by transverse scratch testing
ISO 20502:2005 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of adhesion of ceramic coatings by scratch testing

工业和信息化部/国家能源局, scratch meter scratch

JB/T 12721-2016 Technical specifications for in-situ nanoindentation/scratch tester for solid materials

GSO, scratch meter scratch

GSO ISO 17541:2017 Plastics -- Quantitative evaluation of scratch-induced damage and scratch visibility
OS GSO ISO 17541:2017 Plastics -- Quantitative evaluation of scratch-induced damage and scratch visibility
GSO ISO 1518-2:2012 Paints and varnishes - Determination of scratch resistance — Part 2:Variable-loading method
GSO ISO 1518-1:2012 Paints and varnishes — Determination of scratch resistance — Part 1:Constant-loading method
OS GSO ISO/TR 29381:2013 Metallic materials -- Measurement of mechanical properties by an instrumented indentation test -- Indentation tensile properties

American Society for Testing and Materials (ASTM), scratch meter scratch

ASTM D7027-20 Standard Test Method for Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Using an Instrumented Scratch Machine
ASTM D7187-05 Standard Test Method for Measuring Mechanistic Aspects of Scratch/Mar Behavior of Paint Coatings by Nanoscratching
ASTM D7187-10 Standard Test Method for Measuring Mechanistic Aspects of Scratch/Mar Behavior of Paint Coatings by Nanoscratching
ASTM D7187-15 Standard Test Method for Measuring Mechanistic Aspects of Scratch/Mar Behavior of Paint Coatings by Nanoscratching
ASTM F2496-05 Standard Practice for Determining the Scratch Hardness and Scrape Adhesion of Prints and Coatings
ASTM F2496-05(2011)e1 Standard Practice for Determining the Scratch Hardness and Scrape Adhesion of Prints and Coatings
ASTM C1895-20 Standard Test Method for Determination of Mohs Scratch Hardness
ASTM F548-09 Standard Test Method for Intensity of Scratches on Aerospace Transparent Plastics
ASTM C1895-19 Standard Test Method for Determination of Mohs Scratch Hardness of Ceramic Tile
ASTM F548-03a Standard Test Method for Intensity of Scratches on Aerospace Transparent Plastics
ASTM F548-03 Standard Test Method for Intensity of Scratches on Aerospace Transparent Plastics
ASTM F548-19 Standard Test Method for Intensity of Scratches on Aerospace Transparent Plastics
ASTM F428-19 Standard Test Method for Intensity of Scratches on Aerospace Glass Enclosures
ASTM F548-01 Standard Test Method for Intensity of Scratches on Aerospace Transparent Plastics
ASTM F548-81(1994)e1 Standard Test Method for Intensity of Scratches on Aerospace Transparent Plastics
ASTM F548-03ae1 Standard Test Method for Intensity of Scratches on Aerospace Transparent Plastics
ASTM D7027-13 Standard Test Method for Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Using an Instrumented Scratch Machine
ASTM F428-83(1997)e1 Standard Test Method for Intensity of Scratches on Aerospace Glass Enclosures
ASTM F428-03 Standard Test Method for Intensity of Scratches on Aerospace Glass Enclosures
ASTM F428-83(1997)e2 Standard Test Method for Intensity of Scratches on Aerospace Glass Enclosures
ASTM F428-01 Standard Test Method for Intensity of Scratches on Aerospace Glass Enclosures
ASTM D2943-96 Standard Test Method for Aluminum Scratch of 1,1,1-Trichloroethane to Determine Stability
ASTM F428-03a Standard Test Method for Intensity of Scratches on Aerospace Glass Enclosures
ASTM G171-03 Standard Test Method for Scratch Hardness of Materials Using a Diamond Stylus
ASTM G171-03(2009)e1 Standard Test Method for Scratch Hardness of Materials Using a Diamond Stylus
ASTM D2943-96(2000) Standard Test Method for Aluminum Scratch of 1,1,1-Trichloroethane to Determine Stability
ASTM F428-09 Standard Test Method for Intensity of Scratches on Aerospace Glass Enclosures
ASTM F428-09(2014) Standard Test Method for Intensity of Scratches on Aerospace Glass Enclosures
ASTM F548-09(2014) Standard Test Method for Intensity of Scratches on Aerospace Transparent Plastics
ASTM G171-03(2017) Standard Test Method for Scratch Hardness of Materials Using a Diamond Stylus
ASTM G171-03(2009)e2 Standard Test Method for Scratch Hardness of Materials Using a Diamond Stylus
ASTM D2943-02(2012) Standard Test Method for Aluminum Scratch of 1,1,1-Trichloroethane to Determine Stability
ASTM B648-10 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
ASTM B648-78(2006) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
ASTM B648-78(2000) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
ASTM B648-23 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
ASTM F2497-05(2011)e1 Standard Practice for Abrasion and Scuff Resistance of Inkjet Media by the Sutherland Rub Tester
ASTM D7027-05 Standard Test Method for Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Using an Instrumented Scratch Machine
ASTM D7027-05e1 Standard Test Method for Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Using an Instrumented Scratch Machine
ASTM F2452-04(2012) Standard Practice for Determining the Adhesion of Print Media Utilizing Mechanical Stress: Two Different Test Methodsmdash;Score/Tape and Cross Hatch
ASTM E2546-07 Standard Practice for Instrumented Indentation Testing
ASTM E2546-15(2023) Standard Practice for Instrumented Indentation Testing
ASTM E2546-07e1 Standard Practice for Instrumented Indentation Testing
ASTM E2546-15 Standard Practice for Instrumented Indentation Testing

RO-ASRO, scratch meter scratch

STAS 10251-1980 Tests of metals SCRATCHING TEST
STAS SR ISO 1518:1994 Paints and varnishes - Scratch test
STAS SR EN 101-1994 Ceramic tiles. Determination of scratch hardness of surface according to Mohs

BE-NBN, scratch meter scratch

NBN-ISO 1518:1994 Paints and varnishes - Scratch test
NBN-EN 101-1992 Ceramic tiles - Determination of scratch hardness of surface according to Mohs

ZA-SANS, scratch meter scratch

SANS 279:2004 Paints and varnishes - Scratch test

Japanese Industrial Standards Committee (JISC), scratch meter scratch

JIS K 7316:2013 Plastics -- Determination of scratch properties
JIS K 7317:2022 Plastics -- Determination of scratch hardness of specialty films
JIS A 1126:2007 Method of test for content of soft particles in coarse aggregate by scratching
JIS K 5600-3-6:1999 Testing methods for paints -- Part 3: Film formability -- Section 6: Print free test
JIS A 1126:2001 Method of test for content of soft particles in coarse aggregate by scratching
JIS A 1126:1993 Method of test for soft particles in coarse aggregates by use of scratch tester
JIS A 1126 ERRATUM 1:2001 Method of test for content of soft particles in coarse aggregate by scratching (Erratum 1)

KR-KS, scratch meter scratch

KS M ISO 19252-2019 Plastics — Determination of scratch properties
KS M ISO 17541-2016 Plastics － Quantitative evaluation of scratch-induced damage and scratch visibility
KS D 0294-2018(2023) Standard method for the evaluation of repassivation rate of stainless steel components using laboratory scratch test

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, scratch meter scratch

GB/T 9279-2007 Paints and varnishes.Scratch test
GB/T 41878-2022 Plastics—Determination of scratch properties
GB/T 30707-2014 Testing method on adhesion of fine ceramic coatings.Scratching
GB/T 9279.2-2015 Paints and varnishes.Determination of scratch resistance.Part 2:Variable-loading method
GB/T 9279.1-2015 Paints and varnishes.Determination of scratch resistance.Part 1: Constant-loading method
GB/T 30786-2014 Paints and varnishes.Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing
GB/T 25898-2010(英文版) Instrumented nanoindentation test—Indentation hardness and modulus of thin film
GB/T 20167-2012 Physical test method of rare earth polishing powder.Determination of burnishing mass and scratch.Gravimetry
GB/T 22458-2008(英文版) General rules of instrumented nanoindentation test

German Institute for Standardization, scratch meter scratch

DIN 68861-4:1981 Furniture surfaces; behaviour at scratches
DIN 68861-4:2013-02 Furniture surfaces - Part 4: Behaviour at scratches
DIN 68861-4:2011 Furniture surfaces - Part 4: Behaviour at scratches
DIN CEN/TS 17629:2021-08 Nanotechnologies - Nano- and micro- scale scratch testing; German version CEN/TS 17629:2021
DIN EN ISO 15695:2001 Vitreous and porcelain enamels - Determination of scratch resistance of enamel finishes (ISO 15695:2000, including Technical Corrigendum 1:2000); German version EN ISO 15695:2001
DIN EN ISO 22557:2021-02 Paints and varnishes - Scratch test using a spring-loaded pen (ISO 22557:2019); German version EN ISO 22557:2020
DIN 55656:2014 Paints and varnishes - Scratch test using a hardness pen
DIN EN 15186:2012 Furniture - Assessment of the surface resistance to scratching; German version EN 15186:2012
DIN EN 13523-12:2005 Coil coated metals - Test methods - Part 12: Resistance to scratching; German version EN 13523-12:2004
DIN 55654:2015-08 Scratch test using a linear abrasion tester (crockmeter)
DIN EN ISO 20566:2007 Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory car-wash (ISO 20566:2005); English version of DIN EN ISO 20566:2006-01
DIN EN ISO 6769:2023 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale (ISO 6769:2022)
DIN CEN/TS 17629:2021 Nanotechnologies - Nano- and micro- scale scratch testing; German version CEN/TS 17629:2021
DIN ISO 10110-4:2000 Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 4: Material imperfections; inhomogenity and striae (ISO 10110-4:1997)
DIN EN 15771:2010 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale; German version EN 15771:2010
DIN EN 13523-12:2017 Coil coated metals - Test methods - Part 12: Resistance to scratching; German version EN 13523-12:2017
DIN EN ISO 22557:2021 Paints and varnishes - Scratch test using a spring-loaded pen (ISO 22557:2019); German version EN ISO 22557:2020
DIN EN 4864:2021-04 Aerospace series - Environmental testing - High dynamic abrasion, mar, scratch and punch test in cabin interior; German and English version EN 4864:2020

European Committee for Standardization (CEN), scratch meter scratch

EN 15186:2012 Furniture - Assessment of the surface resistance to scratching
EN ISO 1518:2000 Paints and Varnishes - Scratch Test ISO 1518: 1992
EN ISO 22557:2020 Paints and varnishes - Scratch test using a spring-loaded pen (ISO 22557:2019)
PD CEN/TS 17629:2021 Nanotechnologies - Nano- and micro-scale scratch testing
EN 101:1984 Ceramic Tiles: Determination of Scratch Hardness of Surface According to Mohs
EN 13523-12:2017 Coil coated metals - Test methods - Part 12: Resistance to scratching
EN 16094:2012 Laminate floor coverings - Test method for the determination of micro-scratch resistance
EN 13523-12:2004 Coil coated metals - Test methods - Part 12: Resistance to scratching
EN 16094:2021 Laminate floor coverings - Test method for the determination of micro-scratch resistance
EN ISO 6769:2022 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale (ISO 6769:2022)
EN 15771:2010 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale
EN ISO 15695:2001 Vitreous and Porcelain Enamels - Determination of Scratch Resistance of Enamel Finishes ISO 15695:2000, Including Technical Corrigendum 1:2000
EN ISO 20502:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of adhesion of ceramic coatings by scratch testing (ISO 20502:2005 including Cor 1:2009)
EN 4864:2020 Aerospace series - Environmental testing - High dynamic abrasion, mar, scratch and punch test in cabin interior

Association Francaise de Normalisation, scratch meter scratch

NF D60-051-10*NF EN 15186:2012 Furniture - Assessment of the surface resistance to scratching
NF T51-113:1976 Plastics. Determination of the resistance to scratching.
XP CEN/TS 16611:2017 Furniture - Assessment of surface resistance to micro-scratches
NF T30-314*NF EN ISO 22557:2020 Paints and varnishes - Scratch test using a spring-loaded pen
XP T16-109*XP CEN/TS 17629:2021 Nanotechnologies - Nano- and micro- scale scratch testing
NF A92-119*NF EN ISO 15695:2001 Vitreous and porcelain enamels - Determination of scratch resistance of enamel finishes
XP CEN/TS 17629:2021 Nanotechnologies - Scratch tests at nano- and micrometric scales
NF EN 4864:2020 Aerospace series - Environmental testing - High dynamic abrasion, scrape, scratch and punch test in interior cabin
NF T37-001-12:2005 Coil coated metals - Test methods - Part 12 : resistance to scratching.
NF P94-430-1:2000 Roches - Détermination du pouvoir abrasif d'une roche - Partie 1 : essai de rayure avec une pointe
NF EN ISO 20502:2016 Technical ceramics - Determination of adhesion of ceramic coatings by scratch test
NF EN ISO 22557:2020 Paints and Varnishes - Manual Scratch Test with Hardness Test Pen
NF B54-023:2012 Laminate floor coverings - Test method for the determination of micro-scratch resistance.
NF EN ISO 19399:2017 Paints and varnishes - Determination of thickness by the corner notch method (Scratch and drill method)
NF T30-902:2013 Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory car-wash
NF A92-129*NF EN 15771:2010 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale.
NF T30-106*NF EN ISO 17872:2019 Paints and varnishes - Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing
NF T30-905-1:2007 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 1 : multi-impact testing.
NF T30-106:2007 Paints and varnishes - Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing.
NF EN ISO 17872:2019 Paints and varnishes - Guidelines for producing scratches through the coating of metal panels for corrosion testing
NF A05-131*NF ISO 27307:2015 Thermal spraying - Evaluation of adhesion/cohesion of thermal sprayed ceramic coatings by trasverse scratch testing
NF L17-043*NF EN 4864:2020 Aerospace series - Environmental testing - High dynamic abrasion, mar, scratch and punch test in cabin interior

SCC, scratch meter scratch

DIN 55654:2015 Scratch test using a linear abrasion tester (crockmeter)
DIN 55654 E:2015 Draft Document - Scratch test using a linear abrasion tester (crockmeter)
DANSK DS/CEN/TS 17629:2021 Nanotechnologies – Nano- and micro- scale scratch testing
SN-CEN/TS 17629:2021 Nanotechnologies - Nano- and micro- scale scratch testing
DIN 68861-4 E:2012
DANSK DS/ISO 22557:2019 Paints and varnishes – Scratch test using a spring-loaded pen
BS ISO 22557:2019 Paints and varnishes. Scratch test using a spring-loaded pen
NS-EN ISO 22557:2020 Paints and varnishes — Scratch test using a spring-loaded pen (ISO 22557:2019)
DANSK DS/EN ISO 22557:2020 Paints and varnishes – Scratch test using a spring-loaded pen (ISO 22557:2019)
DIN 55656 E:2013 Draft Document - Paints and varnishes - Manual scratch test using a hardness pen
NS-EN 4864:2020 Aerospace series — Environmental testing — High dynamic abrasion, mar, scratch and punch test in cabin interior

American National Standards Institute （ANSI), scratch meter scratch

ANSI/ASTM D2943:1996 Test Method for Aluminum Scratch of 1,1,1-Trichloroethane
BS EN 16611:2023 Furniture. Assessment of the surface resistance to microscratching (British Standard)
ANSI/ASTM D3554:2007 Specification for Track-Resistant Black Thermoplastic High-Density Polyethylene Insulation for Wire and Cable

Institute of Interconnecting and Packaging Electronic Circuits (IPC), scratch meter scratch

IPC TM-650 2.1.9-1986 Surface Scratch Examination Metal Clad Foil

International Federation of Trucks and Engines, scratch meter scratch

NAVISTAR MPAPS DT-16-2014 Scratch and Mar Testing for Hard Plastic Trim
NAVISTAR MPAPS DT-16-2017 Scratch and Mar Testing for Hard Plastic Trim

未注明发布机构, scratch meter scratch

DIN 68861-4 E:2009-03 Furniture surfaces - Part 4: Behaviour at scratches
DIN EN ISO 22557 E:2020-08 Scratch test of paints and varnishes using spring pens (draft)
DIN 55656 E:2013-03 Paints and varnishes - Scratch test using a hardness pen
ASTM RR-F07-1008 2003 F0428-Test Method for Intensity of Scratches on Aerospace Glass Enclosures
ASTM RR-F07-1007 2003 F0548- Test Method for Intensity of Scratches on Aerospace Transparent Plastics
DIN EN ISO 6769 E:2022-02 Determination of surface scratch hardness of enamels and glazes according to Mohs hardness scale (draft)
DIN 55654 E:2015-01 Scratch test using a linear abrasion tester (crockmeter)
ASTM RR-B07-1002 2010 B0648-Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
ASTM RR-E28-1045 2015 E2546-Practice for Instrumented Indentation Testing
ASTM RR-E28-1025 2007 E2546-Standard Practice for Instrumented Indentation Testing

Danish Standards Foundation, scratch meter scratch

DS/CEN/TS 17629:2021 Nanotechnologies – Nano- and micro- scale scratch testing
DS 2176:1981 Furniture and fittings. Assessment of surface resistance to grease on surfaces with scratches
DS/EN ISO 22557:2020 Paints and varnishes – Scratch test using a spring-loaded pen (ISO 22557:2019)
DS/EN 15771:2010 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale
DS/EN ISO 17872:2007 Paints and varnishes - Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing
DS/EN 4864:2020 Aerospace series – Environmental testing – High dynamic abrasion, mar, scratch and punch test in cabin interior

GM Global, scratch meter scratch

GMW 15676-2012 Door Window System - Glass Scratch Durability Issue 2; English

CZ-CSN, scratch meter scratch

CSN 72 5126-1987 Determination of scratch hardness of surface accordíng to Mohs
CSN EN 101-1994 Ceramic floor and wall tiles.Determination of scratch hardness of surface according to Mohs

PL-PKN, scratch meter scratch

PN B12038-06-1987 Ceramic tiles Determination of scratch hardness of surface according to Mohs
PN C04142-1958 Petroleum products. Testing for scratching problems caused by grease
PN-EN ISO 22557-2021-06 E Paints and varnishes--Scratch test using a spring-loaded pen (ISO 22557:2019)
PN C99470-02-1988 Physical and chemical testing methods of photographic materials Determination for resistance of scratches on wet photographic layers
PN-EN 4864-2021-06 E Aerospace series -- Environmental testing -- High dynamic abrasion, mar, scratch and punch test in cabin interior

AT-ON, scratch meter scratch

ONR CEN/TS 17629-2021 Nanotechnologies - Nano- and micro- scale scratch testing
ONORM EN 101-1992 Ceramic tiles - Determination of Scratch hardness of surface according to Mohs
OENORM EN ISO 22557:2021 Paints and varnishes - Scratch test using a spring-loaded pen (ISO 22557:2019)
OENORM EN 4864-2021 Aerospace series - Environmental testing - High dynamic abrasion, mar, scratch and punch test in cabin interior

Lithuanian Standards Office , scratch meter scratch

LST CEN/TS 17629-2021 Nanotechnologies - Nano- and micro- scale scratch testing
LST EN ISO 22557:2021 Paints and varnishes - Scratch test using a spring-loaded pen (ISO 22557:2019)
LST EN 15771-2010 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale
LST EN 4864-2021 Aerospace series - Environmental testing - High dynamic abrasion, mar, scratch and punch test in cabin interior

ES-UNE, scratch meter scratch

UNE-CEN/TS 17629:2021 Nanotechnologies - Nano- and micro- scale scratch testing (Endorsed by Asociación Española de Normalización in July of 2021.)
UNE-EN ISO 22557:2021 Paints and varnishes - Scratch test using a spring-loaded pen (ISO 22557:2019)
UNE-EN ISO 6769:2023 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale (ISO 6769:2022)

IT-UNI, scratch meter scratch

UNI EN ISO 22557:2021 Paints and varnishes - Scratch test using a spring-loaded pen
UNI EN 4864-2021 Aerospace series - Environmental testing - High dynamic abrasion, mar, scratch and punch test in cabin interior

Professional Standard - Agriculture, scratch meter scratch

47药典三部-2015 Monograph Ⅰ Live plague vaccines for the prevention of scratches on skin-like skin
52药典三部-2020 Monograph Ⅰ Live plague vaccines for the prevention of scratches on skin-like skin
48药典三部-2015 Monograph Ⅰ Live Anthrax Vaccines for Prevention of Epidermal Scratch in Humans
53药典三部-2020 Monograph Ⅰ Live Anthrax Vaccines for Prevention of Epidermal Scratch in Humans
49药典三部-2015 Monograph Ⅰ Live Brucella Vaccines for Prevention of Scratch on Dermatoids
54药典三部-2020 Monograph Ⅰ Live Brucella Vaccines for Prevention of Scratch on Dermatoids
26药典三部-2010 Chapter Ⅰ Live plague vaccines for the prevention of scratches on skin
27药典三部-2010 Individual monographs, headings Ⅰ Live anthrax vaccines for human use in the prevention of epidermis scratch marks
28药典三部-2010 Chapter 1 of each monograph Ⅰ Prevention of human brucella live vaccine against scratches on skin

YU-JUS, scratch meter scratch

JUS EN 101-1991 Ceramic tiles. Determination of scratch hardness of surface according to Mohs

RU-GOST R, scratch meter scratch

GOST 21318-1975 Measurement of microhardness by scratch diamond instruments
GOST R 8.907-2015 State system for ensuring the uniformity of measurements. State verification schedule for means measuring on Martens scales hardness and indentation scales hardness

Professional Standard - Machinery, scratch meter scratch

JB/T 8554-1997 Scratch test method for adhesion between vapor plating film and the base

US-FCR, scratch meter scratch

FCR COE CRD-C 130-01-2001 STANDARD RECOMMENDED PRACTICE FOR ESTIMATING SCRATCH HARDNESS OF COARSE AGGREGATE PARTICLES

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, scratch meter scratch

GB/T 34251-2017 Test method for metal marking resistance of glazed ceramic tableware

CH-SNV, scratch meter scratch

SN EN ISO 22557:2021 Paints and varnishes - Scratch test using a spring-loaded pen (ISO 22557:2019)
SN EN 4864-2021 Aerospace series - Environmental testing - High dynamic abrasion, mar, scratch and punch test in cabin interior

AENOR, scratch meter scratch

UNE-EN 15771:2011 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale

IN-BIS, scratch meter scratch

IS 13630 Pt.13-1993 Ceramic tiles. Methods of test. Part 13: Determination of scratch hardness of surface according to mohs

Professional Standard-Ships, scratch meter scratch

CB 1109-1984 Tolerance of reticles for marine instrument reticles

Professional Standard - Public Safety Standards, scratch meter scratch

GA/T 822-2009 Indented marks electrostatic developing apparatus technical requirement

Malaysia Standards, scratch meter scratch

MS 133 Pt.E2-2000 Methods of test for paints and varnishes:Part E2:Scratch test(First revision)(ISO 1518:1992,MOD)

Professional Standard - Electricity, scratch meter scratch

DL/T 1865-2018 Calibration procedures for trace total organic carbon analyzers