ZH
RU
ES
Jiangbei high temperature furnace
Jiangbei high temperature furnace, Total:133 items.
In the international standard classification, Jiangbei high temperature furnace involves: Welding, brazing and soldering, Construction materials, Conducting materials, Equipment for the metallurgical industry, Lubricants, industrial oils and related products, Refractories, Paints and varnishes, Mechanical testing, Audio, video and audiovisual engineering, Equipment for the chemical industry, Fluid storage devices, Industrial furnaces, Ferrous metals, Metalliferous minerals, Farming and forestry, Dentistry, Raw materials for rubber and plastics, Rubber, Burners. Boilers, Environmental protection, Energy and heat transfer engineering in general, On-board equipment and instruments, Installations in buildings, Fuels, Power stations in general, Products of the chemical industry, Fruits. Vegetables, Vocabularies, Materials and articles in contact with foodstuffs, Nuclear energy engineering, Iron and steel products.
Association of German Mechanical Engineers, Jiangbei high temperature furnace
煤炭工业部, Jiangbei high temperature furnace
- MT/T 508.1-1995 Technical conditions of Beijing Mining Bureau coal for use in blast furnaces
Group Standards of the People's Republic of China, Jiangbei high temperature furnace
- T/CSTM 00202-2020 high temperature kiln fired slag bricks
- T/CSTM 00640-2022 High temperature resistant powder coatings for oven
- T/SSEA 0096-2020 Technical Requirements for Covering and Insulation of Blast Furnace Ladle
- T/SHDSGY 123-2023 Technical specification for nitrogen oxide detection instruments in high-temperature boiler flue gas
- T/CEC 685-2022 Technical specification for high-temperature nano-ceramic recognition coating on boiler heating surface
- T/CSEE 0182-2021 The technical guide for the atmosphere measurement at high temperature corrosion area close to furnace water wall of a coal-fired boiler
- T/CFA 0203081-2020 General technical requirements for high-efficient and energy-saving aluminum alloy gas continuous melting and holding furnace
Professional Standard - Ferrous Metallurgy, Jiangbei high temperature furnace
AENOR, Jiangbei high temperature furnace
- UNE 9003:1986 HIGH-TEMPERATURE WATER BOILERS. CLASSIFICATION.
- UNE-EN 14394:2006+A1:2009 Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C
冶金工业部, Jiangbei high temperature furnace
- YB 4038-1991 Low temperature rough seam paste for blast furnace
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Jiangbei high temperature furnace
- GB/T 30163-2013 Specifications of top combustion stove with high blast temperature for blast furnace
- GB/T 15415-1994 Methods of measurement for furnace high-temperature television system
- GB/T 15414-1994 Generic specification for furnace high-temperature television system
- GB/T 24204-2009 Iron ores for blast furnace feedstocks.Determination of low-temperature reduction-disintegration indices by dynamic method
- GB/T 32527-2016 Design specification of space materials science experimental facility.Multifunctional high temperature furnace
- GB/T 31923.2-2015 Iron ores for blast furnace feedstocks.Determination of low-temperature reduction-disintegration indices by static method.Part 2:Reduction with CO and N<下标2>
- GB/T 31923.1-2015 Iron ores for blast furnace feedstocks.Determination of low-temperature reduction-disintegration indices by static method.Part 1: Reduction with CO, CO<下标2>, H<下标2> and N<下标2>
工业和信息化部, Jiangbei high temperature furnace
- YS/T 1126-2016 Resistance ultra-high temperature vacuum furnace
- JC/T 2632-2021 Technical conditions of high temperature carbonization furnace for carbon fiber production
United States Navy, Jiangbei high temperature furnace
- NAVY QPL-21164-25-2003 GREASE, MOLYBDENUM DISULFIDE, FOR LOW AND HIGH TEMPERATURE NATO CODE NUMBER G-353
- NAVY MIL-G-21164 D VALID NOTICE 1-1991 GREASE, MOLYBDENUM DISULFIDE, FOR LOW AND HIGH TEMPERATURES, NATO CODE NUMBER G-353
- NAVY MIL-G-21164 D-1981 GREASE, MOLYBDENUM DISULFIDE, FOR LOW AND HIGH TEMPERATURES, NATO CODE NUMBER G-353
- NAVY QPL-21164-2013 GREASE, MOLYBDENUM DISULFIDE, FOR LOW AND HIGH TEMPERATURES, NATO CODE NUMBER G-353
Professional Standard - Machinery, Jiangbei high temperature furnace
- JB/T 11583-2013 High temperature furnace used for testing machines.Technical specification
- JB/T 12528-2015 Large pit-type controlled atmosphere high temperature carburizing furnace unit
Professional Standard - Electron, Jiangbei high temperature furnace
- SJ 20974-2007 Generic specification for high temperature sintering elevator furnace
- SJ/T 31130-1994 Requirements of readiness and methods of inspection and assessment for D051-22 high temperature hydrogen furnaces
Professional Standard - Chemical Industry, Jiangbei high temperature furnace
- HG/T 3673-2000 Static cast fittings of fubnace for service pressure bearing at high temperature
- HG/T 4565-2013 High-temperature resistant coatings for boilers and auxiliary equipments
- HG/T 2601-2000 Centifugal casting alloy tubes for service of pressure bearing at high temperature
- HG/T 2601-2011 Centrifugal casting alloy tubes for service of pressure bearing at high temperature
SE-SIS, Jiangbei high temperature furnace
- SIS SS 18 71 77-1991 Solid fuels — Determination of total sulfur using a high temperature tube furnace combustion method
European Committee for Standardization (CEN), Jiangbei high temperature furnace
- prEN 127-1-1980 CEN-heating boiler standard for boilers with operating temperature up to 100 C
- prEN 127-2-1980 CEN-heating boiler standard for boilers made from steel with operating temperatures exceeding 100 C and for steam
- prEN 127-3-1980 CEN-heating boiler standard for boilers made from cast-iron with operating temperatures exceeding 100 C and for steam
- prEN ISO 13078-3 Dentistry - Dental furnace - Part 3: Test method for evaluation of high temperature sintering furnace measurement with separate thermocouple (ISO/DIS 13078-3:2022)
Anhui Provincial Standard of the People's Republic of China, Jiangbei high temperature furnace
- DB34/T 1320-2010 Disaster Avoidance and Reduction Production Technical Regulations for Jianghuai Middle Rice Rice Part 1: Compensatory Cultivation Techniques for High Temperature and Heat Damage Compensation of Jianghuai Middle Rice Rice
- DB34/T 3449-2019 Diagnosis guidelines for typical damage modes of high temperature headers of utility boilers
BE-NBN, Jiangbei high temperature furnace
American Society of Mechanical Engineers (ASME), Jiangbei high temperature furnace
RU-GOST R, Jiangbei high temperature furnace
- GOST 20901-1975 Refractory and high-refractory products for laying of stoves and hot blast mains of blast furnaces. Specifications
- GOST 10888-1993 Periclasechromite refractories products for the steelmelting furnace roofs. Specifications
- GOST 10888-1976 Periclasechromite refractories for the steelmelting furnace roofs
- GOST 21436-2004 Refractory and high-refractoty articles for the lining of rotary furnaces. Specifications
- GOST 21436-1975 Refractory and highly-refractory articles for the lining of rotary furnaces. Specifications
- GOST R 54829-2011 Heating boilers with forced draught burners, with nominal heat output not exceeding 10 MW and maximum operating temperature of 150 °C
邯郸市, Jiangbei high temperature furnace
- DB1304/T 345-2020 High-efficiency technical regulations for light and temperature for double-cropping of wheat and corn in the plains of central and southern Hebei Province
Henan Provincial Standard of the People's Republic of China, Jiangbei high temperature furnace
- DB41/T 1294-2016 Test and Evaluation of High Temperature Sulfur Corrosion of Water Wall of Power Plant Boiler
British Standards Institution (BSI), Jiangbei high temperature furnace
- BS EN ISO 13078-3:2023 Dentistry. Dental furnace - Test method for the evaluation of high temperature sintering furnace measurement with a separate thermocouple
- 22/30425562 DC BS EN ISO 13078-3. Dentistry. Dental furnace. Part 3. Test method for evaluation of high temperature sintering furnace measurement with separate thermocouple
- BS 845-2:1987 Methods for assessing thermal performance of boilers for steam, hot water and high temperature heat transfer fluids - Comprehensive procedure
- BS ISO 11257:2015 Iron ores for shaft direct-reduction feedstocks. Determination of the low-temperature reduction-disintegration index and degree of metallization
- BS ISO 11257:2007 Iron ores for shaft direct-reduction feedstocks. Determination of the low-temperature reduction-disintegration index and degree of metallization
- BS 845-1:1987 Methods for assessing thermal performance of boilers for steam, hot water and high temperature heat transfer fluids - Concise procedure
International Organization for Standardization (ISO), Jiangbei high temperature furnace
- ISO 6528-3:1988 Rubber; determination of total sulfur content; part 3: furnace combustion method
- ISO 540:1995 Solid mineral fuels - Determination of fusibility of ash - High-temperature tube method
- ISO/PRF 13078-3 Dentistry — Dental furnace — Part 3: Test method for the evaluation of high temperature sintering furnace measurement with a separate thermocouple
- ISO 13078-3:2023 Dentistry — Dental furnace — Part 3: Test method for the evaluation of high temperature sintering furnace measurement with a separate thermocouple
- ISO 11257:2007 Iron ores for shaft direct-reduction feedstocks - Determination of the low-temperature reduction-disintegration index and degree of metallization
- ISO 11257:2015 Iron ores for shaft direct-reduction feedstocks - Determination of the low-temperature reduction-disintegration index and degree of metallization
Korean Agency for Technology and Standards (KATS), Jiangbei high temperature furnace
- KS M ISO 6528-3:2006 Rubber-Determination of total sulfur content-Part 3:Furnace combustion method
- KS M ISO 6528-3:2016 Rubber－Determination of total sulfur content－Part 3：Furnace combustion method
- KS B 6203-2002 Maximum working pressure and super heated steam temperature of stationary steam boilers
- KS E ISO 13930-2017(2022) Iron ores for blast furnace feedstocks－Determination of low-temperature reduction-disintegration indices by dynamic method
- KS E ISO 4696-2:2022 Iron ores for blast furnace feedstocks — Determination of low-temperature reduction-disintegration indices by static method — Part 2: Reduction with CO and N2
- KS E ISO 4696-1-2017(2022) Iron ores for blast furnace feedstocks－Determination of low-temperature reduction-disintegration indices by static method－Part 1：Reduction with CO, CO2, H2 and N2
BR-ABNT, Jiangbei high temperature furnace
AT-ON, Jiangbei high temperature furnace
- ONORM M 7550-2002 Heating boilers with operation temperatures up to 100℃-Concepts,requirements, testing,marking
ZA-SANS, Jiangbei high temperature furnace
- SANS 43:1995 Solid mineral fuels - Determination of fusibility of ash - High-temperature tube method
未注明发布机构, Jiangbei high temperature furnace
- BS ISO 13930:2015(2018) Iron ores for blast furnace feedstocks — Determination of low - temperature reduction - disintegration indices by dynamic method
- BS 3059-1:1987(1999) Steel boiler and superheater tubes — Part 1 : Specification for low tensile carbon steel tubes without specified elevated temperature properties
- BS 845-1:1987(1999) Methods for Assessing thermal performance of boilers for steam, hot water and high temperature heat transfer fluids — Part 1 : Concise procedure
- BS 845-2:1987(2011) Methods for Assessing thermal performance of boilers for steam, hot water and high temperature heat transfer fluids — Part 2 : Comprehensive procedure
KR-KS, Jiangbei high temperature furnace
- KS E ISO 13930-2017 Iron ores for blast furnace feedstocks－Determination of low-temperature reduction-disintegration indices by dynamic method
- KS E ISO 4696-2-2022 Iron ores for blast furnace feedstocks — Determination of low-temperature reduction-disintegration indices by static method — Part 2: Reduction with CO and N2
- KS E ISO 4696-1-2017 Iron ores for blast furnace feedstocks－Determination of low-temperature reduction-disintegration indices by static method－Part 1：Reduction with CO, CO2, H2 and N2
IN-BIS, Jiangbei high temperature furnace
Liaoning Provincial Standard of the People's Republic of China, Jiangbei high temperature furnace
- DB21/T 2662.11-2016 Boiler Operation Specifications Part 11: Determination of Scale Inhibition Rate of Industrial Steam Boiler Scale Inhibition Rate Heating Surface Wall Temperature Raise Method
Association Francaise de Normalisation, Jiangbei high temperature furnace
- NF EN 14394+A1:2008 Chaudières de chauffage - Chaudières avec brûleurs à air soufflé - Puissance utile inférieure ou égale à 10 MW et température maximale de service de 110 oC
- NF EN 14394/IN1:2008 Chaudières de chauffage - Chaudières avec brûleurs à air soufflé - Puissance utile inférieure ou égale à 10 MW et température maximale de service de 110 oC
Guangxi Provincial Standard of the People's Republic of China, Jiangbei high temperature furnace
- DB45/T 1424-2016 Specifications for the design of high-temperature reaction furnaces for the production of graphene three-dimensional structure powder materials
German Institute for Standardization, Jiangbei high temperature furnace
- DIN EN ISO 13078-3:2023-08 Dentistry - Dental furnace - Part 3: Test method for the evaluation of high temperature sintering furnace measurement with a separate thermocouple (ISO 13078-3:2023); German version EN ISO 13078-3:2023
- DIN EN 14394:2008-12 Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C; German version EN 14394:2005+A1:2008
ES-UNE, Jiangbei high temperature furnace
- UNE-EN ISO 13078-3:2023 Dentistry - Dental furnace - Part 3: Test method for the evaluation of high temperature sintering furnace measurement with a separate thermocouple (ISO 13078-3:2023) (Endorsed by Asociación Española de Normalización in July of 2023.)
Guangdong Provincial Standard of the People's Republic of China, Jiangbei high temperature furnace
- DB44/T 849.3-2010 Determination of scale inhibition rate of industrial boiler scale inhibitors Part 3: Heated surface wall temperature rise method
Danish Standards Foundation, Jiangbei high temperature furnace
- DS/EN 14394+A1:2008 Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C
Lithuanian Standards Office , Jiangbei high temperature furnace
- LST EN 14394-2006+A1-2008 Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C
American Society for Testing and Materials (ASTM), Jiangbei high temperature furnace
- ASTM D4239-94 Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High Temperature Tube Furnace Combustion Methods
- ASTM D4239-10 Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion Methods
- ASTM D4239-97e1 Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High Temperature Tube Furnace Combustion Methods
- ASTM D4239-04a Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High Temperature Tube Furnace Combustion Methods
- ASTM D4239-04 Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High Temperature Tube Furnace Combustion Methods
- ASTM d4239-18 Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High Temperature Tube Furnace Combustion Methods
- ASTM D4239-17 Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion
- ASTM D4239-08 Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion Methods
- ASTM D423-66(1972) Standard Test Method for Determination of Sulfur in Coal and Coke Analytical Samples by High Temperature Tube Furnace Combustion Method
- ASTM D4239-00 Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High Temperature Tube Furnace Combustion Methods
- ASTM D4239-02 Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High Temperature Tube Furnace Combustion Methods
- ASTM D4239-11 Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion Methods
- ASTM D4239-13 Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion
- ASTM D4239-05 Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High Temperature Tube Furnace Combustion Methods
- ASTM D4239-12 Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion
- ASTM D4239-14e1 Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion
- ASTM D4239-18e1 Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion
- ASTM D4239-10e1 Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion Methods
- ASTM D4239-13e1 Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion
- ASTM D4239-14 Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion
- ASTM D4239-14e2 Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion
- ASTM E354-14 Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys
- ASTM D5016-98 Standard Test Method for Sulfur in Ash from Coal, Coke, and Residues from Coal Combustion Using High-Temperature Tube Furnace Combustion Method with Infrared Absorption
- ASTM D5016-08 Standard Test Method for Total Sulfur in Coal and Coke Combustion Residues Using a High-Temperature Tube Furnace Combustion Method with Infrared Absorption
IT-UNI, Jiangbei high temperature furnace
国家质量监督检验检疫总局, Jiangbei high temperature furnace
- SN/T 2822-2011 Determination of the interface temperature between plastic and food during the heating process of exported food contact materials, polymer materials, plastics and products in microwave ovens or traditional furnaces
Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Jiangbei high temperature furnace
- GJB 5404.6-2005 Analysis methods for trace elements in super alloys Part 6: Determination of gallium content by graphite furnace atomic absorption spectrometric method
- GJB 5404.10-2005 Analysis methods for trace elements in super alloys Part 10: Determination of selenium content by graphite furnace atomic absorption spectrometric method
Military Standard of the People's Republic of China-General Armament Department, Jiangbei high temperature furnace
- GJB 8781.10-2015 Methods for trace element analysis of high temperature alloys Part 10: Determination of selenium content by graphite furnace atomic absorption spectrometry
- GJB 8781.6-2015 Methods for trace element analysis of high temperature alloys Part 6: Determination of gallium content by graphite furnace atomic absorption spectrometry
Professional Standard - Energy, Jiangbei high temperature furnace
- NB/T 47019.3-2011 Purchase technical specification for boiler&heater exchanger tubes/pipes.Part 3:Non-alloy and alloy steel with specified elevated temperature properties
国家能源局, Jiangbei high temperature furnace
- NB/T 47019.3-2021 Technical conditions for ordering tubes for boilers and heat exchangers Part 3: Non-alloy steel and alloy steel specifying high-temperature properties
WRC - Welding Research Council, Jiangbei high temperature furnace
- BULLETIN 517-2006 EXAMINATION OF MECHANICAL PROPERTIES AND CORROSION OF HIGH TEMPERATURE ALLOYS AFTER LONG TERM SERVICE UNDER ADVANCED POWER PLANT BOILER CONDITIONS THE EDDYSTONE STUDIES
American Welding Society (AWS), Jiangbei high temperature furnace
- WRC 517:2006 Examination of Mechanical Properties And Corrosion of High Temperature Alloys after Long Term Service under Advanced Power Plant Boiler Conditions - The Eddystone Studies