ZH
RU
ES

Bulk cement inspection standards and methods

Bulk cement inspection standards and methods, Total:485 items.

In the international standard classification, Bulk cement inspection standards and methods involves: Construction materials, Microbiology, Water quality, Inorganic chemicals, Freight distribution of goods, Shipbuilding and marine structures in general, Fertilizers, Earthworks. Excavations. Foundation construction. Underground works, Particle size analysis. Sieving, Crude petroleum, Fuels, Fluid storage devices, Pharmaceutics, Packaging materials and accessories, Organic chemicals, Road engineering, Refractories, Elements of buildings, Packaging and distribution of goods in general, Adhesives, Clothes, Acoustics and acoustic measurements, Radiation protection, Lifting equipment, Plastics, Kitchen equipment, Measurement of fluid flow, Welding, brazing and soldering, Machine tool systems, Medical sciences and health care facilities in general, Products of the textile industry.


German Institute for Standardization, Bulk cement inspection standards and methods

  • DIN 38414-23:2002-02 German standard methods for the examination of water, waste water and sludge - Sludge and sediments (group S) - Part 23: Determination of 15 polycyclic aromatic hydrocarbons (PAH) by high performance liquid chromatography (HPLC) and fluorescence detect...
  • DIN 38412-37:1999-04 German standard methods for the examination of water, waste water and sludge - Bio-assays (group L) - Part 37: Determination of the inhibitory effect of water on the growth of bacteria (Photobacterium phosphoreum cell multiplication inhibition test) (L...
  • DIN 38407-37:2013-11 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 37: Determination of organochlorine pesticides, polychlorinated biphenyls and chlorobenzene in water - Method using gas chro...
  • DIN 38407-44:2018-02 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 44: Determination of selected heterocyclic aromatic hydrocarbons (NSO heterocycles) in water - Method using gas chromatograp...
  • DIN 38407-39:2011-09 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 39: Determination of selected polycyclic aromatic hydrocarbons (PAH) - Method using gas chromatography with mass spectrometr...
  • DIN 38407-42:2011-03 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 42: Determination of selected polyfluorinated compounds (PFC) in water - Method using high performance liquid chromatography...
  • DIN 38407-35:2010-10 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 35: Determination of selected phenoxyalkyl carbonic acids and further acid plant treatment agents - Method using high perfor...
  • DIN 38407-36:2014-09 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 36: Determination of selected active substances of plant protection products and other organic substances in water - Method ...
  • DIN 38407-22:2001-10 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 22: Determination of Glyphosate and Aminomethyl phosphic acid (AMPA) by high performance liquid chromatography (HPLC), post-...
  • DIN 38414-13:1992-03 German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); detection of salmonellae in disinfected sewage sludge (S 13)
  • DIN 38414-11:1987-08 German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); sampling of sediments (S 11) / Note: To be replaced by DIN ISO 5667-12 (2016-04).
  • DIN 38409-59:2022-10 German standard methods for the examination of water, waste water and sludge - Parameters characterizing effects and substances (group H) - Part 59: Determination of adsorbable organically bound fluorine, chlorine, bromine and iodine (AOF, AOCl, AOBr, ...
  • DIN 38414-6:1986-04 German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); determination of oxygen consumption rate (S 6)
  • DIN 38411-1:1983 German standard methods for the examination of water, waste water and sludge; Microbiological methods (Group K); Preparation for the microbiological examination of water samples (K1)
  • DIN 38414-4:1984 German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); determination of leachability by water (S 4)
  • DIN 38402-16:1987-08 German standard methods for the examination of water, waste water and sludge; general information (group A); sampling of sea water (A 16)
  • DIN 38414-12:1986 German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); determination of phosphorus in sludges and sediments (S 12)
  • DIN 38414-8:1985 German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); determination of the amenability to anaerobic digestion (S 8)
  • DIN 38406-1:1983 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of iron (E 1)
  • DIN 38406-2:1983-05 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of manganese (E 2)
  • DIN 38406-1:1983-05 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of iron (E 1)
  • DIN 38406-5:1983-10 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of ammonia-nitrogen (E 5)
  • DIN 38414-13:1992 German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); detection of salmonellae in disinfected sewage sludge (S 13)
  • DIN 38414-9:1986-09 German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); determination of the chemical oxygen demand (COD) (S 9)
  • DIN 38406-2:1983 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of manganese (E 2)
  • DIN 38402-20:1987-08 German standard methods for the examination of water, waste water and sludge; general information (group A); sampling of tidal waters (A 20)
  • DIN 38412-16:1985 German standard methods for the examination of water, waste water and sludge; test methods using water organisms (group L); determination of chlorophyll a in surface water (L 16)
  • DIN 38406-5:1983 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of ammonia-nitrogen (E 5)
  • DIN 38414-8:1985-06 German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); determination of the amenability to anaerobic digestion (S 8)
  • DIN 38414-24:2000 German standard methods for the examination of water, waste water and sludge - Sludge and sediments (group S) - Part 24: Determination of polychlorinated dibenzodioxins (PCDD) and polychlorinated dibenzofuranes (PCDF) (S 24)
  • DIN 38405-13:1981 German Standard Methods for the Analysis of Water, Waste Water and Sludge; Anions (Group D); Determination of Cyanides (D 13)
  • DIN 38405-1:1985-12 German standard methods for the examination of water, waste water and sludge; anions (group D); determination of chloride ions (D 1)
  • DIN 38405-4:1985-07 German standard methods for the examination of water, waste water and sludge; anions (group D); determination of fluoride (D 4)
  • DIN 38402-13:1985 German standard methods for the examination of water, waste water and sludge; general information (group A); sampling from aquifers (A 13)
  • DIN EN 480-1:2007 Admixtures for concrete, mortar and grout - Test methods - Part 1: Reference concrete and reference mortar for testing; English version of DIN EN 480-1:2007-01
  • DIN 38409-6:1986-01 German standard methods for the examination of water, waste water and sludge; summary indices of actions and substances (group H); water hardness (H 6)
  • DIN 38408-3:1993 German standard methods for the examination of water, waste water and sludge; gaseous components (group G); determination of ozone (G 3)
  • DIN 38402-51:2017-05 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 51: Calibration of analytical methods - Linear calibration (A 51)
  • DIN 38402-11:2009 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 11: Sampling of waste water (A 11)
  • DIN 38402-11:2009-02 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 11: Sampling of waste water (A 11)
  • DIN 38402-19:1988 German standard methods for the examination of water, waste water and sludge; general information (group A); sampling of swimming pool and bathing pool water (A 19)
  • DIN 38402-18:1991-05 German standard methods for the examination of water, waste water and sludge; general information (group A); sampling of water from mineral springs and spas (A 18)
  • DIN 38414-18:1989 German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); determination of adsorbed organically bound halogens (AOX) (S 18)
  • DIN 38408-23:1987 German standard methods for the examination of water, waste water and sludge; gaseous constituents (group G); determination of oxygen saturation index (G 23)
  • DIN 38409-6:1986 German standard methods for the examination of water, waste water and sludge; summary indices of actions and substances (group H); water hardness (H 6)
  • DIN 38406-11:1991 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of nickel by atomic absorption spectrometry (AAS) (E 11)
  • DIN 38406-7:1991 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of copper by atomic absorption spectrometry (AAS) (E 7)
  • DIN 38405-21:1990-10 German standard methods for the examination of water, waste water and sludge; anions (group D); determination of dissolved silicate by spectrometry (D 21)
  • DIN 38414-22:2000 German standard methods for the examination of water, waste water and sludge - Sludge and sediments (group S) - Part 22: Determination of dry residue by freezing and preparation of the freeze dried mass of sludge (S 22)
  • DIN 38408-5:1990 German standard methods for the examination of water, waste water and sludge; gaseous components (group G); determination of chlorine dioxide (G 5)
  • DIN 38402-1:1987 German standard methods for the examination of water, waste water and sludge; general information (group A); recording of analysis results (A 1)
  • DIN 38405-5:1985-01 German standard methods for the examination of water, waste water and sludge; anions (group D); determination of sulfate ions (D 5)
  • DIN 38408-5:1990-06 German standard methods for the examination of water, waste water and sludge; gaseous components (group G); determination of chlorine dioxide (G 5)
  • DIN 38402-15:2010 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 15: Sampling from running waters (A 15)
  • DIN 38414-6:1986 German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); determination of oxygen consumption rate (S 6)
  • DIN 38402-12:1985-06 German standard methods for the examination of water, waste water and sludge; general information (group A); sampling from barrages and lakes (A 12)
  • DIN 38409-16:1984 German standard methods for the examination of water, waste water and sludge; general measures of effects and substances (group H); determination of the phenol index (H 16)
  • DIN 38406-7:1991-09 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of copper by atomic absorption spectrometry (AAS) (E 7)
  • DIN 38406-11:1991-09 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of nickel by atomic absorption spectrometry (AAS) (E 11)
  • DIN 38406-24:1993-03 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of cobalt by atomic absorption spectrometry (AAS) (E 24)
  • DIN 38405-4:1985 German standard methods for the examination of water, waste water and sludge; anions (group D); determination of fluoride (D 4)
  • DIN 38405-1:1985 German standard methods for the examination of water, waste water and sludge; anions (group D); determination of chloride ions (D 1)
  • DIN 38405-5:1985 German standard methods for the examination of water, waste water and sludge; anions (group D); determination of sulfate ions (D 5)
  • DIN 38409-16:1984-06 German standard methods for the examination of water, waste water and sludge; general measures of effects and substances (group H); determination of the phenol index (H 16)
  • DIN 38402-42:2005 German standard methods for the examination of water, waste water and sludge - General informations (group A) - Part 42: Interlaboratory trials for method validation, evaluation (A 42)
  • DIN 38406-3:2002-03 German standard methods for the examination of water, waste water and sludge - Cations (group E) - Part 3: Determination of calcium and magnesium, complexometric method (E 3)
  • DIN 38414-9:1986 German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); determination of the chemical oxygen demand (COD) (S 9)
  • DIN 38414-19:1999-12 German standard methods for the examination of water, waste water and sludge - Sludge and sediments (group S) - Part 19: Determination of the steam-volatile organic acids (S 19)
  • DIN 38414-23:2002 German standard methods for the examination of water, waste water and sludge - Sludge and sediments (group S) - Part 23: Determination of 15 polycyclic aromatic hydrocarbons (PAH) by high performance liquid chromatography (HPLC) and fluorescence detection
  • DIN 38405-33:2001-02 German standard methods for the examination of water, waste water and sludge - Anions (group D) - Part 33: Determination of iodide by spectrometry (D 33)
  • DIN 38405-33 Berichtigung 1:2018-12 German standard methods for the examination of water, waste water and sludge - Anions (group D) - Part 33: Determination of iodide by spectrometry (D 33); Corrigendum 1
  • DIN 38406-16:1990-03 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of zinc, cadmium, lead, copper, thallium, nickel, cobalt by voltammetry (E 16)
  • DIN 38402-41:1984 German standard methods for the examination of water, waste water and sludge; general information (group A); inter-laboratory tests; planning and organization (A 41)
  • DIN 38408-3:2011-04 German standard methods for the examination of water, waste water and sludge - Gaseous components (group G) - Part 3: Determination of ozone (G 3)
  • DIN 38405-13:2011-04 German standard methods for the examination of water, waste water and sludge - Anions (group D) - Part 13: Determination of cyanides (D 13)
  • DIN 38414-22:2018-10 German standard methods for the examination of water, waste water and sludge - Sludge and sediments (group S) - Part 22: Determination of dry residue by freezing and preparation of the freeze dried mass of sludge (S 22)
  • DIN 38414-17:1989 German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); determination of strippable and extractable organically bound halogens (S 17)
  • DIN 38406-24:1993 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of cobalt by atomic absorption spectrometry (AAS) (E 24)
  • DIN 38405-27:1992 German standard methods for the examination of water, waste water and sludge; anions (group D); determination of readily liberatet sulfide (D 27)
  • DIN 38405-13:2011 German standard methods for the examination of water, waste water and sludge - Anions (group D) - Part 13: Determination of cyanides (D 13)
  • DIN 38408-3:2011 German standard methods for the examination of water, waste water and sludge - Gaseous components (group G) - Part 3: Determination of ozone (G 3)
  • DIN 38402-1:2011-09 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 1: Recording of analysis results (A 1)
  • DIN 38406-3:2002 German standard methods for the examination of water, waste water and sludge - Cations (group E) - Part 3: Determination of calcium and magnesium, complexometric method (E 3)
  • DIN 38404-10:2012-12 German standard methods for the examination of water, waste water and sludge - Physical and physico-chemical parameters (group C) - Part 10: Calculation of the calcit saturation of water (C 10)
  • DIN 38404-13:1988 German standard methods for the examination of water, waste water and sludge; physical and physicochemical parameters (group C); determination of tritium (C 13)
  • DIN 38404-4:1976 German Standard Methods for Analysing of Water, Waste Water and Sludge; Physical and Physical-chemical Parameters (Group C); Determination of Temperature (C4)
  • DIN 38405-27:2017-10 German standard methods for the examination of water, waste water and sludge - Anions (group D) - Part 27: Determination of sulfide by gas extraction method (D 27)
  • DIN 38405-23:1994-10 German standard methods for the examination of water, waste water and sludge - Anions (Group D) - Part 23: Determination of selenium by atomic absorption spectrometry (D 23)
  • DIN 38406-32:2000-05 German standard methods for the examination of water, waste water and sludge - Cations (group E) - Part 32: Determination of iron by atomic absorption spectrometry (E 32)
  • DIN 38406-33:2000-06 German standard methods for the examination of water, waste water and sludge - Cations (group E) - Part 33: Determination of manganese by atomic absorption spectrometry (E 33)
  • DIN 38405-32:2000-05 German standard methods for the examination of water, waste water and sludge - Anions (group D) - Part 32: Determination of antimony by atomic absorption spectrometry (D 32) / Note: To be replaced by DIN ISO 17378-2 (2017-01, t).
  • DIN 38414-18:2019-06 German standard methods for the examination of water, waste water and sludge - Sludge and sediments (group S) - Part 18: Determination of adsorbed organically bound halogens in sludge and sediments (AOX) (S 18)
  • DIN 38412-31:1989 German standard methods for the examination of water, waste water and sludge; bio-assays (group L); determining the tolerance of fish to the toxicity of waste water by way of a dilution series (L 31)
  • DIN 38402-51:2017 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 51: Calibration of analytical methods - Linear calibration (A 51)
  • DIN 38402-51:2015 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 51: Calibration of analytical methods - Linear calibration (A 51)
  • DIN 38414-15:1990 German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); determination of the specific residual beta activity in sludge, sediment and suspended matter (S 15)
  • DIN 38405-9:2011 German standard methods for examination of water, waste water and sludge - Anions (group D) - Part 9: Spectrometric determination of nitrate (D 9)
  • DIN 38405-9:1979 German standard methods for examination of water, waste water and sludge; anions (group D), determination of nitrate ion (D9)
  • DIN 38405-9:2011-09 German standard methods for examination of water, waste water and sludge - Anions (group D) - Part 9: Spectrometric determination of nitrate (D 9)
  • DIN 38407-2:1993 German standard methods for the determination of water, waste water and sludge; jointly determinable substances (group F); determination of low volatile halogenated hydrocarbons by gas chromatography (F 2)
  • DIN 38402-13:2021 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 13: Design and performance of the sampling of groundwater (A 13)
  • DIN 38402-13:2021-12 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 13: Design and performance of the sampling of groundwater (A 13)
  • DIN 38414-21:1996 German standard methods for the examination of water, waste water and sludge - Sludge and sediments (group S) - Part 21: Determination of 6 polynuclear aromatic hydrocarbons (PAH) by high performance liquid chromatography (HPLC) with fluorescence detectio
  • DIN 38414-20:1996 German standard methods for the examination of water, waste water and sludge - Sludge and sediments (group S) - Part 20: Determination of 6 polychlorinated biphenyls (PCB) (S 20)
  • DIN 38414-17:2017-01 German standard methods for the examination of water, waste water and sludge - Sludge and sediments (group S) - Part 17: Determination of the organically bound halogens amenable to extraction (EOX) (S 17)
  • DIN 38412-3:2010 German standard methods for the examination of water, waste water and sludge - Bio-assays (group L) - Part 3: Toxicity test for assessing the inhibition of the dehydrogenase activity of activated sludge microorganisms (TTC-Test) (L 3)
  • DIN 38414-14:2011-08 German standard methods for the examination of water, waste water and sludge - Sludge and sediments (group S) - Part 14: Determination of selected polyfluorinated compounds (PFC) in sludge, compost and soil - Method using high performance liquid chroma...
  • DIN 38405-24:1987 German standard methods for the examination of water, waste water and sludge; anions (group D); photometric determination of chromium(VI) using 1,5-diphenylcarbonohydrazide (D 24)
  • DIN 38406-6:1998-07 German standard methods for the examination of water, waste water and sludge - Cations (group E) - Part 6: Determination of lead by atomic absorption spectrometry (AAS) (E 6)
  • DIN 38405-52:2020-11 German standard methods for the examination of water, waste water and sludge - Anions (group D) - Part 52: Photometric determination of dissolved chromium(VI) in water (D 52)
  • DIN 38402-45:2014-06 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 45: Interlaboratory comparisons for proficiency testing of laboratories (A 45)
  • DIN 38413-4:1986 German standard methods for the examination of water, waste water and sludge; individual constituents (group P); determination of carbon disulfide (P 4)
  • DIN 38409-15:1987-06 German standard methods for the examination of water, waste water and sludge; general measures of effects and substances (group H); determination of hydrogen peroxide and its adducts (H 15)
  • DIN 38404-5:1984 German standard methods for examination of water, waste water and sludge; physical and physico-chemical characteristics (group C); determination of pH value (C5)
  • DIN 38415-3:1996-12 German standard methods for the examination of water, waste water and sludge - Sub-animal testing (group T) - Part 3: Determination of the genotype potential of water and waste water components with the umu-test (T 3)
  • DIN 38414-14:2011 German standard methods for the examination of water, waste water and sludge - Sludge and sediments (group S) - Part 14: Determination of selected polyfluorinated compounds (PFC) in sludge, compost and soil - Method using high performance liquid chromatog
  • DIN 38405-24:1987-05 German standard methods for the examination of water, waste water and sludge; anions (group D); photometric determination of chromium(VI) using 1,5-diphenylcarbonohydrazide (D 24)
  • DIN 38405-52:2020 German standard methods for the examination of water, waste water and sludge - Anions (group D) - Part 52: Photometric determination of dissolved chromium(VI) in water (D 52)
  • DIN 38405-29 Berichtigung 1:2019-02 German standard methods for the examination of water, waste water and sludge - Anions (group D) - Part 29: Spectrometric determination of nitrate with sulfosalicylic acid (D 29); ISO 7890-3:1988, modified; Corrigendum 1
  • DIN 38409-9:1980-07 German standard methods for the examination of water, waste water and sludge; general measures of effects and substances (group H), determination of the settleable matter by volume in water and waste water (H9)
  • DIN 38405-35:2004-09 German standard methods for the examination of water, waste water and sludge - Anions (group D) - Part 35: Determination of arsenic - Method by graphite furnace atomic absorption spectrometry (GF-AAS) (D 35)
  • DIN 38402-24:2007-05 German standard methods for the examination of water, waste water and sludge - General informations (group A) - Part 24: Guidance on sampling of suspended sediments (A 24)
  • DIN 38405-14:1988 German standard methods for the examination of water, waste water and sludge; anions (group D); determination of cyanides in drinking water, and in groundwater and surface water with low pollution levels (D 14)
  • DIN 38406-32:2000 German standard methods for the examination of water, waste water and sludge - Cations (group E) - Part 32: Determination of iron by atomic absorption spectrometry (E 32)
  • DIN 38405-32:2000 German standard methods for the examination of water, waste water and sludge - Anions (group D) - Part 32: Determination of antimony by atomic absorption spectrometry (D 32)
  • DIN 38405-23:1994 German standard methods for the examination of water, waste water and sludge - Anions (Group D) - Part 23: Determination of selenium by atomic absorption spectrometry (D 23)
  • DIN 38406-18:1990 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of dissolved silver by atomic absorption spectrometry using electrothermal atomization (E 18)
  • DIN 38402-45:2014 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 45: Interlaboratory comparisons for proficiency testing of laboratories (A 45)
  • DIN 38402-45:2003 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 45: Interlaboratory comparisons for proficiency testing of laboratories (A 45)
  • DIN 38414-19:1999 German standard methods for the examination of water, waste water and sludge - Sludge and sediments (group S) - Part 19: Determination of the steam-volatile organic acids (S 19)
  • DIN 38411-6:1991 German standard methodes for the examination of water, waste water und sludge; microbiological methods (group K); determination of Escherichia coli and coliform organisms (K6)
  • DIN 38406-17:2009-10 German standard methods for the examination of water, waste water and sludge - Cations (group E) - Part 17: Determination of uranium - Method using adsorptive stripping voltammetry in surface water, raw water and drinking water (E 17)
  • DIN 38404-10:2012 German standard methods for the examination of water, waste water and sludge - Physical and physico-chemical parameters (group C) - Part 10: Calculation of the calcit saturation of water (C 10)
  • DIN 38402-30:1998-07 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 30: Pretreatment, homogenization and aliquotation of non-homogeneous water samples (A 30)
  • DIN 38412-11:1982 German standard methods for the examination of water, waste water and sludge; Test methods using water organisms (group L); Determination of the effect on microcrustacea of substances contained in water (Daphnia short-time test) (L 11)
  • DIN 38410-1:2004-10 German standard methods for the examination of water, waste water and sludge - Biological-ecological analysis of water (group M) - Part 1: Determination of the saprobic index in running waters (M 1)
  • DIN 38412-30:1989-03 German standard methods for the examination of water, waste water and sludge; bio-assays (group L); determining the tolerance of Daphnia to the toxicity of waste water by way of a dilution series (L 30)
  • DIN 38412-14:1983-09 German standard methods for the examination of water, waste water and sludge; test methods using water organisms (group L); determination of oxygen production by means of the light and dark bottle method under laboratory conditions (SPL) (L 14) (determ...
  • DIN 38415-6:2003 German standard methods for the examination of water, waste water and sludge - Subanimal testing (group T) - Part 6: Toxicity to fish; Determination of the non-acute-poisonous effect of waste water to fish eggs by dilution limits (T 6)
  • DIN 38409-7:2005 German standard methods for the examination of water, waste water and sludge - Parameters characterizing effects and substances (group H) - Part 7: Determination of acid and base-neutralizing capacities (H 7)
  • DIN 38406-13:1992 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of potassium by atomic absorption spectrometry (AAS) using an air-acetylene flame (E 13)
  • DIN 38406-14:1992 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of sodium by atomic absorption spectrometry (ASS) using an air-acetylene flame (E 14)
  • DIN 38412-13:1983-09 German standard methods for the examination of water, waste water and sludge; test methods using water organisms (group L); determination of oxygen production and oxygen consumption in an aquatic environment (SPG and SVG) by means of the light and dark...
  • DIN 38412-30:1989 German standard methods for the examination of water, waste water and sludge; bio-assays (group L); determining the tolerance of Daphnia to the toxicity of waste water by way of a dilution series (L 30)
  • DIN 38406-17:2009 German standard methods for the examination of water, waste water and sludge - Cations (group E) - Part 17: Determination of uranium - Method using adsorptive stripping voltammetry in surface water, raw water and drinking water (E 17)
  • DIN 38402-24:2007 German standard methods for the examination of water, waste water and sludge - General informations (group A) - Part 24: Guidance on sampling of suspended sediments (A 24)
  • DIN 38409-2:1987-03 German standard methods for the examination of water, waste water and sludge; parameters characterizing effects and substances (group H); determination of filterable matter and the residue on ignition (H 2)
  • DIN 38409-27:1992 German standard methods for the examination of water, waste water and sludge; parameters characterizing effects and substances (group H); determination of total bound nitrogen TN<(Index)b> (H 27)
  • DIN 38409-16 Berichtigung 1:2018-12 German standard methods for the examination of water, waste water and sludge - General measures of effects and substances (group H) - Part 16: Determination of the phenol index (H 16); Corrigendum 1
  • DIN 38406-26:1997 German standard methods for the examination of water, waste water and sludge - Cations (group E) - Part 26: Determination of thallium by atomic absorption spectrometry (AAS) using electrothermal atomisation (E 26)
  • DIN 38413-2:1988 German standard methods for the examination of water, waste water and sludge; individual constituents (group P); determination of vinyl chloride by headspace gas chromatography (P 2)
  • DIN 38406-18:1990-05 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of dissolved silver by atomic absorption spectrometry using electrothermal atomization (E 18)
  • DIN 38407-16:1999-06 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 16: Determination of aniline derivates by gas chromatography (F 16)
  • DIN 38402-60:2013-12 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 60: Analytical quality assurance for chemical and physicochemical water analysis (A 60)
  • DIN 38412-26:1994-05 German standard methods for the examination of water, waste water and sludge; bio-assays (group L); surfactant biodegradation and elimination test for simulation of municipal waste water treatment plants (L 26)
  • DIN 38412-3:2010-10 German standard methods for the examination of water, waste water and sludge - Bio-assays (group L) - Part 3: Toxicity test for assessing the inhibition of the dehydrogenase activity of activated sludge microorganisms (TTC-Test) (L 3)
  • DIN 38409-10:1980-07 German standard methods for the examination of water, waste water and sludge; general measures of effects and substances (group H), determination of the settleable matter by mass concentration in water and waste water (H10)
  • DIN 38412-26:1994 German standard methods for the examination of water, waste water and sludge; bio-assays (group L); surfactant biodegradation and elimination test for simulation of municipal waste water treatment plants (L 26)
  • DIN 38402-71:2020-10 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 71: Equivalence of two analysis methods based on the comparison of analysis results (A 71)
  • DIN 38409-7:2005-12 German standard methods for the examination of water, waste water and sludge - Parameters characterizing effects and substances (group H) - Part 7: Determination of acid and base-neutralizing capacities (H 7)
  • DIN 38409-15:1987 German standard methods for the examination of water, waste water and sludge; general measures of effects and substances (group H); determination of hydrogen peroxide and its adducts (H 15)
  • DIN 38409-23:2010 German standard methods for the examination of water, waste water and sludge - Parameters characterizing effects and substances (group H) - Part 23: Determination of bismut active substances (H 23)
  • DIN 38409-23:2010-12 German standard methods for the examination of water, waste water and sludge - Parameters characterizing effects and substances (group H) - Part 23: Determination of bismut active substances (H 23)
  • DIN 38404-6:1984-05 German standard methods for the examination of water, waste water and sludge; physical and physico-chemical parameters (group C); determination of the oxidation reduction (redox) potential (C 6)
  • DIN SPEC 38402-100:2017-08 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 100: Testing for threshold violation, taking into account the measurement uncertainty using statistical and empirical methods (A 100)
  • DIN 38413-6:2007-02 German standard methods for the examination of water, waste water and sludge - Single components (group P) - Part 6: Determination of acrylamide - Methode using high performance liquid chromatography with mass spectrometric detection (HPLC-MS/MS) (P 6)
  • DIN 38409-9:1980 German standard methods for the examination of water, waste water and sludge; general measures of effects and substances (group H), determination of the settleable matter by volume in water and waste water (H9)
  • DIN 38414-17:2017 German standard methods for the examination of water, waste water and sludge - Sludge and sediments (group S) - Part 17: Determination of the organically bound halogens amenable to extraction (EOX) (S 17)
  • DIN 38414-17:2014 German standard methods for the examination of water, waste water and sludge - Sludge and sediments (group S) - Part 17: Determination of the organically bound halogens amenable to extraction (EOX) (S 17)
  • DIN 38409-2:1987 German standard methods for the examination of water, waste water and sludge; parameters characterizing effects and substances (group H); determination of filterable matter and the residue on ignition (H 2)
  • DIN 38406-21:1980 German standard methods for the examination of water, waste water and sludge; cations (group E), determination of nine heavy metals (Ag, Bi, Cd, Co, Cu, Ni, Pb, Tl, Zn) (E21)
  • DIN 38402-51:1986 German standard methods for the examination of water, waste water and sludge; general information (group A); calibration of analytical methods, evaluation of analytical results and linear calibration functions used to determine the performance characteris
  • DIN 38406-6:1998 German standard methods for the examination of water, waste water and sludge - Cations (group E) - Part 6: Determination of lead by atomic absorption spectrometry (AAS) (E 6)
  • DIN 38407-16:1999 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 16: Determination of aniline derivates by gas chromatography (F 16)
  • DIN 38405-21:1990 German standard methods for the examination of water, waste water and sludge; anions (group D); determination of dissolved silicate by spectrometry (D 21)
  • DIN 38405-26:1989 German standard methods for the examination of water, waste water and sludge; anions (group D); determination of dissolved sulfide by spectrometry (D 26)
  • DIN 38406-14:1992-07 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of sodium by atomic absorption spectrometry (ASS) using an air-acetylene flame (E 14)
  • DIN 38406-13:1992-07 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of potassium by atomic absorption spectrometry (AAS) using an air-acetylene flame (E 13)
  • DIN 38404-10:1995 German standard methods for the examination of water, waste water and sludge - Physical and physico-chemical parameters (group C) - Part 10: Calcit saturation of water (C 10)
  • DIN 38409-60:2019-12 German standard methods for the examination of water, waste water and sludge - Parameters characterizing effects and substances (group H) - Part 60: Spectrometric determination of the chlorophyll-a concentration in water (H 60)
  • DIN 38402-6:1991 German standard methods for the examination of water, waste water and sludge; general information (group A); assessment of the minimum frequency for controlling water constituents in discharges (emission strategy) (A 6)
  • DIN 38405-29:1994-11 German standard methods for the examination of water, waste water and sludge - Anions (group D) - Part 29: Spectrometric determination of nitrate with sulfosalicylic acid (D 29); ISO 7890-3:1988, modified
  • DIN 38402-1:2011 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 1: Recording of analysis results (A 1)
  • DIN 38415-4:1999 German standard methods for the examination of water, waste water and sludge - Sub-animal testing (group T) - Part 4: Determination of the genotoxic potential using the Salmonella microsome test (Ames Test) (T 4)
  • DIN 38407-9:1991 German standard methods for the examination of water, waste water and sludge; substance group analysis (group F); determination of benzene and some of its derivatives by gas chromatography (F 9)
  • DIN 38411-9:2001 German standard methods for the examination of water, waste water and sludge - Microbiological methods (group K) - Part 9: Determination of enterobacterial common antigen (ECA) for the detection of lactose-fermenting enterobacteriaceae (K 9)
  • DIN 38406-8:2004-10 German standard methods for examination of water, waste water and sludge - Cations (group E) - Part 8: Determination of zinc - Method by atomic absorption spectrometry (AAS) using an air-ethine flame (E 8)
  • DIN 38404-18:1994 German standard methods for the examination of water, waste water and sludge; physical and physical-chemical parameters (group C); determination of Radium-226-concentration in potable water, ground water, surface water and waste water (C 18)
  • DIN 38409-46:2011 German standard methods for the examination of water, waste water and sludge - Parameters characterizing effects and substances (group H) - Part 46: Determination of purgeable organic carbon (POC) (H 46)
  • DIN 38409-46:2012 German standard methods for the examination of water, waste water and sludge - Parameters characterizing effects and substances (group H) - Part 46: Determination of purgeable organic carbon (POC) (H 46)
  • DIN 38409-8:1984 German standard methods for the examination of water, waste water and sludge; summary indices of actions and substances (group H); determination of extractable organically bonded halogens (EOX) (H 8)
  • DIN 38409-46:2012-12 German standard methods for the examination of water, waste water and sludge - Parameters characterizing effects and substances (group H) - Part 46: Determination of purgeable organic carbon (POC) (H 46)
  • DIN 38409-10:1980 German standard methods for the examination of water, waste water and sludge; general measures of effects and substances (group H), determination of the settleable matter by mass concentration in water and waste water (H10)
  • DIN 38405-7:2002-04 German standard methods for examination of water, waste water and sludge - Anions (group D) - Part 7: Determination of cyanides in low polluted water by liquid chromatography of ions or potentiometric titration (D 7)
  • DIN 38407-42:2011 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 42: Determination of selected polyfluorinated compounds (PFC) in water - Method using high performance liquid chromatography an
  • DIN 38402-62:2014-12 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 62: Plausibility check of analytical data by performing an ion balance (A 62)
  • DIN 38409-1:1987-01 German standard methods for the examination of water, waste water and sludge; parameters characterizing effects and substances (group H); determination of total dry residue, filtrate dry residue and residue on ignition (H 1)
  • DIN 38409-26:1989 German standard methods for the examination of water, waste water and sludge; parameters characterizing effects and substances (group H); determination of the bismut-chelating index I<(Index)BiK> (H 26)
  • DIN 38406-26:1997-07 German standard methods for the examination of water, waste water and sludge - Cations (group E) - Part 26: Determination of thallium by atomic absorption spectrometry (AAS) using electrothermal atomisation (E 26)
  • DIN 38409-43:1981 German standard methods for the analysis of water, waste water and sludge; Summary action and material characteristic parameters (group H); Determination for the chemical oxygen demand (COD); short duration method (H 43)
  • DIN 38405-33:2001 German standard methods for the examination of water, waste water and sludge - Anions (group D) - Part 33: Determination of iodide by spectrometry (D 33)
  • DIN 38407-30:2007-12 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 30: Determination of trihalogenmethanes in bathing water and pool water with headspace-gas chromatography (F 30)
  • DIN 38413-6:2007 German standard methods for the examination of water, waste water and sludge - Single components (group P) - Part 6: Determination of acrylamide - Methode using high performance liquid chromatography with mass spectrometric detection (HPLC-MS/MS) (P 6)
  • DIN 38412-14:1983 German standard methods for the examination of water, waste water and sludge; test methods using water organisms (group L); determination of oxygen production by means of the light and dark bottle method under laboratory conditions (SPL) (L 14) (determina
  • DIN 38404-6 Berichtigung 1:2018-12 German standard methods for the examination of water, waste water and sludge - Physical and physico-chemical parameters (group C) - Part 6: Determination of the oxidation reduction (redox) potential (C 6); Corrigendum 1
  • DIN 38409-41:1980-12 German Standard Methods for Examination of Water, Waste Water and Sludge; Summary Action and Material Characteristic Parameters (Group H); Determination of the Chemical Oxygen Demand (COD) in the Range over 15 mg/l (H41)
  • DIN 38409-44:1992-05 German standard methods for the examination of water, waste water and sludge; parameters characterizing effects and substances (group H); determination of the chemical oxygen demand (COD), ranging from 5 to 50 mg/l (H 44)
  • DIN 38415-4:1999-12 German standard methods for the examination of water, waste water and sludge - Sub-animal testing (group T) - Part 4: Determination of the genotoxic potential using the Salmonella microsome test (Ames Test) (T 4)
  • DIN 38412-48:2002 German standard methods for the examination of water, waste water and sludge - Bio-assays (group L) - Part 48: Toxicity test with Arthrobacter globiformis for contaminated solids (L 48)
  • DIN 38404-6:1984 German standard methods for the examination of water, waste water and sludge; physical and physico-chemical parameters (group C); determination of the oxidation reduction (redox) potential (C 6)
  • DIN 38412-33:1991 German standard methods for the examination of water, waste water and sludge; bio-assays (group L); determining the tolerance of green algae to the toxicity of waste water (Scenedesmus chlorophyll fluorescence test) by way of dilution series (L 33)
  • DIN 38407-27:2012-10 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 27: Determination of selected phenols in groundwater and leachate, aqueous eluates and percolates (F 27)
  • DIN 38407-7:2000 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 7: Determination of six polycyclic aromatic hydrocarbons (PAH) in drinking and mineral water by high performance thin layer chr
  • DIN 38407-30:2007 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 30: Determination of trihalogenmethanes in bathing water and pool water with headspace-gas chromatography (F 30)
  • DIN 38407-17:1999-02 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 17: Determination of selected nitroaromatic compounds by gas-liquid chromatography (F 17)
  • DIN 38407-39:2011 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 39: Determination of selected polycyclic aromatic hydrocarbons (PAH) - Method using gas chromatography with mass spectrometric
  • DIN 38404-14:1987 German standard methods for the examination of water, waste water and sludge; physical-chemical parameters (group C); determination of total alpha activity concentration in potable water, ground water and surface water (C 14)
  • DIN 38405-7:2002 German standard methods for examination of water, waste water and sludge - Anions (group D) - Part 7: Determination of cyanides in low polluted water by liquid chromatography of ions or potentiometric titration (D 7)
  • DIN 38412-27:1992 German standard methods for the examination of water, waste water and sludge; bio-assays (group L); determination of the inhibitory effect of waste water on the oxygen consumption of Pseudomonas putida (L 27)
  • DIN 38407-27:2012 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 27: Determination of selected phenols in groundwater and leachate, aqueous eluates and percolates (F 27)
  • DIN 38402-60:2013 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 60: Analytical quality assurance for chemical and physicochemical water analysis (A 60)
  • DIN 38409-44:1992 German standard methods for the examination of water, waste water and sludge; parameters characterizing effects and substances (group H); determination of the chemical oxygen demand (COD), ranging from 5 to 50 mg/l (H 44)
  • DIN 38409-20:1989 German standard methods for the examination of water, waste water and sludge; parameters characterizing effects and substances (group H); determination of substances that react with disulfine blue (H 20)
  • DIN 38407-22:2001 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 22: Determination of Glyphosate and Aminomethyl phosphic acid (AMPA) by high performance liquid chromatography (HPLC), post-col
  • DIN 38406-33:2000 German standard methods for the examination of water, waste water and sludge - Cations (group E) - Part 33: Determination of manganese by atomic absorption spectrometry (E 33)
  • DIN 38409-56:2009 German standard methods for the examination of water, waste water and sludge - Parameters characterizing effects and substances (group H) - Part 56: Gravimetric determination of low volatile lipophilic substances after solvent extraction (H 56)
  • DIN 38413-8:2000 German standard methods for the examination of water, waste water and sludge - Single components (group P) - Part 8: Determination of nitrilotriacetic acid (NTA), ethylenedinitrilotetraacetic acid (EDTA) and diethylenetrinitrilopentaacetic acid (DTPA) by
  • DIN 38412-13:1983 German standard methods for the examination of water, waste water and sludge; test methods using water organisms (group L); determination of oxygen production and oxygen consumption in an aquatic environment (SPG and SVG) by means of the light and dark bo
  • DIN 38407-41:2011 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 41: Determination of selected easily volatile organic compounds in water - Method using gas chromatography (GC-MS) after headsp
  • DIN 38407-37:2013 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 37: Determination of organochlorine pesticides, polychlorinated biphenyls and chlorobenzene in water - Method using gas chromat
  • DIN 38404-15:1987 German standard methods for the examination of water, waste water and sludge; physical and physico-chemical parameters (group C); determination of beta activity per unit volume in drinking water, ground water, surface water and waste water (C 15)
  • DIN 38413-5:1990 German standard methods for the examination of water, waste water and sludge; individual constituents (group P); determination of ethylenediaminetetraacetic acid (EDTA) and nitrilotriacetic acid (NTA) by polarography (P 5)
  • DIN 38405-29:1994 German standard methods for the examination of water, waste water and sludge - Anions (group D) - Part 29: Spectrometric determination of nitrate with sulfosalicylic acid (D 29); ISO 7890-3:1988, modified
  • DIN 38412-33:1991-03 German standard methods for the examination of water, waste water and sludge; bio-assays (group L); determining the tolerance of green algae to the toxicity of waste water (Scenedesmus chlorophyll fluorescence test) by way of dilution series (L 33)
  • DIN 38415-1:1995-02 German standard methods for the examination of water, waste water and sludge - Sub-animal testing (group T) - Part 1: Determination of cholinesterase inhibiting organophosphorus and carbamate pesticides (cholinesterase inhibition test) (T 1)
  • DIN 38407-8:1995 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 8: Determination of 6 polynuclear aromatic hydrocarbons (PAH) in water by high performance liquid chromatography (HPLC) with fl
  • DIN 38402-62:2014 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 62: Plausibility check of analytical data by performing an ion balance (A 62)
  • DIN 38405-35:2004 German standard methods for the examination of water, waste water and sludge - Anions (group D) - Part 35: Determination of arsenic - Method by graphite furnace atomic absorption spectrometry (GF-AAS) (D 35)
  • DIN 38404-3:2005-07 German standard methods for the examination of water, waste water and sludge - Physical and physical-chemical parameters (group C) - Part 3: Determination of absorption in the range of the ultraviolet radiation, Spectral absorptions coefficient (C 3)
  • DIN EN 480-13:2010 Admixtures for concrete, mortar and grout - Test methods - Part 13: Reference masonry mortar for testing mortar admixtures; German version EN 480-13:2009
  • DIN 38404-16:1989 German standard methods for the examination of water, waste water and sludge; physical and physicochemical parameters (group C); determination of radionuclides in drinking water, ground water, surface water and waste water by -ray spectrometry (C 1
  • DIN 38404-3:2005 German standard methods for the examination of water, waste water and sludge - Physical and physicochemical parameters (group C) - Part 3: Determination of spectral absorption in the UV range, Spectral absorptions coefficient (C 3)
  • DIN 38413-8:2000-09 German standard methods for the examination of water, waste water and sludge - Single components (group P) - Part 8: Determination of nitrilotriacetic acid (NTA), ethylenedinitrilotetraacetic acid (EDTA) and diethylenetrinitrilopentaacetic acid (DTPA) ...
  • DIN 38407-34:2006 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 34: Determination of selected plant treatment agents, biocides and break-down products; Method using gas chromatography (GC-MS)
  • DIN 38409-1:1987 German standard methods for the examination of water, waste water and sludge; parameters characterizing effects and substances (group H); determination of total dry residue, filtrate dry residue and residue on ignition (H 1)
  • DIN 38415-1:1995 German standard methods for the examination of water, waste water and sludge - Sub-animal testing (group T) - Part 1: Determination of cholinesterase inhibiting organophosphorus and carbamate pesticides (cholinesterase inhibition test) (T 1)
  • DIN V 38407-11:1995-01 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 11: Determination of selected organic plant protecting agents by Automated Multiple Development (AMD)-technique (F 11)

The American Road & Transportation Builders Association, Bulk cement inspection standards and methods

  • AASHTO T 185-2008 Standard Method of Test for Early Stiffening of Hydraulic Cement (Mortar Method)
  • AASHTO T 353-2014 Standard Method of Test for Particle Size Analysis of Hydraulic Cement and Related Materials by Light Scattering
  • AASHTO T 162-2008 Standard Method of Test for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
  • AASHTO T 188-2005(R2009) Standard Method of Test for Evaluation by Freezing and Thawing of Air-Entraining Additions to Hydraulic Cement
  • AASHTO T 127-2002 Standard Method of Test for Sampling and Amount of Testing of Hydraulic Cement HM-22; Part IIA; ASTM Designation: C 183-97
  • AASHTO T 160-2009 Standard Method of Test for Length Change of Hardened Hydraulic Cement Mortar and Concrete
  • AASHTO T 162-2014 Standard Method of Test for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
  • AASHTO T 162-2015 Standard Method of Test for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
  • AASHTO T 162-2016 Standard Method of Test for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
  • AASHTO T 162-2002 Standard Method of Test for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency HM-22; Part IIA; ASTM Designation: C 305-99
  • AASHTO T 128-1997 Standard Method of Test for Fineness of Hydraulic Cement by the 150-um (No. 100) and 75-um (No. 200) Sieves HM-22; Part IIA; ASTM Designation: C 184-94 R(2001)

AASHTO - American Association of State Highway and Transportation Officials, Bulk cement inspection standards and methods

  • T 353-2014 Standard Method of Test for Particle Size Analysis of Hydraulic Cement and Related Materials by Light Scattering
  • T 160-2009 Standard Method of Test for Length Change of Hardened Hydraulic Cement Mortar and Concrete
  • T 160-1997 Standard Method of Test for Length Change of Hardened Hydraulic Cement Mortar and Concrete
  • T 188-2005 Standard Method of Test for Evaluation by Freezing and Thawing of Air-Entraining Additions to Hydraulic Cement
  • T 162-2004 Standard Method of Test for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
  • T 162-2009 Standard Method of Test for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
  • T 162-2014 Standard Method of Test for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
  • T 162-2015 Standard Method of Test for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
  • T 162-2008 Standard Method of Test for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
  • T 162-2016 Standard Method of Test for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
  • T 162-2012 Standard Method of Test for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency

American Society for Testing and Materials (ASTM), Bulk cement inspection standards and methods

  • ASTM C1506-16a Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters
  • ASTM C1506-17 Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters
  • ASTM C1506-08 Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters
  • ASTM C1506-09 Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters
  • ASTM C1698-09(2014) Standard Test Method for Autogenous Strain of Cement Paste and Mortar
  • ASTM C1506-01 Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters
  • ASTM C1506-16 Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters
  • ASTM C1506-16b Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters
  • ASTM C1556-04 Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion
  • ASTM C1556-22 Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion
  • ASTM C1556-11a Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion
  • ASTM C1506-03 Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters
  • ASTM C204-18 Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus
  • ASTM C204-11e1 Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus
  • ASTM C204-18e1 Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus
  • ASTM C204-23 Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus
  • ASTM D5982-15 Standard Test Method for Determining Cement Content of Fresh Soil-Cement (Heat of Neutralization Method)
  • ASTM C1565-19 Standard Test Method for Determination of Pack-Set Index of Portland and Blended Hydraulic Cements
  • ASTM C1556-11 Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion
  • ASTM D5982-07 Standard Test Method for Determining Cement Content of Fresh Soil-Cement (Heat of Neutralization Method)
  • ASTM C204-16 Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus
  • ASTM C1922-23 Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters by Way of Water Loss
  • ASTM C1556-03 Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion
  • ASTM C243-95 Standard Test Method for Bleeding of Cement Pastes and Mortars (Withdrawn 2001)
  • ASTM C1556-11a(2016) Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion
  • ASTM D4511-92(1996) Standard Test Method for Hydraulic Conductivity of Essentially Saturated Peat
  • ASTM D4511-00 Standard Test Method for Hydraulic Conductivity of Essentially Saturated Peat
  • ASTM D4511-00(2006) Standard Test Method for Hydraulic Conductivity of Essentially Saturated Peat
  • ASTM C1698-19 Standard Test Method for Autogenous Strain of Cement Paste and Mortar
  • ASTM D4511-11 Standard Test Method for Hydraulic Conductivity of Essentially Saturated Peat
  • ASTM C157/C157M-04 Standard Test Method for Length Change of Hardened Hydraulic-Cement, Mortar, and Concrete
  • ASTM C482-02(2014) Standard Test Method for Bond Strength of Ceramic Tile to Portland Cement Paste
  • ASTM C1565-17 Standard Test Method for Determination of Pack-Set Index of Portland and Blended Hydraulic Cements
  • ASTM D4282-02 Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion
  • ASTM D4282-15(2022) Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion
  • ASTM D4282-02(2010) Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion
  • ASTM D2980-71(1996) Standard Test Method for Volume Weights, Water-Holding Capacity, and Air Capacity of Water-Saturated Peat Materials
  • ASTM D2980-04 Standard Test Method for Volume Weights, Water-Holding Capacity, and Air Capacity of Water-Saturated Peat Materials
  • ASTM D2980-04(2010) Standard Test Method for Volume Weights, Water-Holding Capacity, and Air Capacity of Water-Saturated Peat Materials
  • ASTM D560-03 Standard Test Methods for Freezing and Thawing Compacted Soil-Cement Mixtures
  • ASTM D559-03 Standard Test Methods for Wetting and Drying Compacted Soil-Cement Mixtures
  • ASTM D560/D560M-16 Standard Test Methods for Freezing and Thawing Compacted Soil-Cement Mixtures
  • ASTM D560/D560M-15 Standard Test Methods for Freezing and Thawing Compacted Soil-Cement Mixtures
  • ASTM D559/D559M-15(2023) Standard Test Methods for Wetting and Drying Compacted Soil-Cement Mixtures
  • ASTM C157/C157M-08(2014)e1 Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete
  • ASTM D4282-02(2015) Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion
  • ASTM D4282-15 Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion
  • ASTM C157-75 Standard Test Method for Length Change Of Hardened Cement Mortar And Concrete
  • ASTM C157/C157M-03 Standard Test Method for Length Change of Hardened Hydraulic-Cement, Mortar, and Concrete
  • ASTM C157/C157M-99 Standard Test Method for Length Change of Hardened Hydraulic-Cement, Mortar, and Concrete
  • ASTM C157/C157M-06 Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete
  • ASTM C157/C157M-08 Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete
  • ASTM C157/C157M-17 Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete
  • ASTM C157/C157M-08e1 Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete
  • ASTM C311-11b Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete
  • ASTM D6683-01 Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids
  • ASTM D4007-11(2016) Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
  • ASTM D2980-02 Standard Test Method for Volume Weights, Water-Holding Capacity, and Air Capacity of Water-Saturated Peat Materials
  • ASTM D2980-17 Standard Test Method for Saturated Density, Moisture-Holding Capacity, and Porosity of Saturated Peat Materials
  • ASTM C166-05(2023) Standard Test Method for Covering Capacity and Volume Change Upon Drying of Thermal Insulating Cement
  • ASTM C1365-06 Standard Test Method for Determination of the Proportion of Phases in Portland Cement and Portland-Cement Clinker Using X-Ray Powder Diffraction Analysis
  • ASTM C1365-06(2011) Standard Test Method for Determination of the Proportion of Phases in Portland Cement and Portland-Cement Clinker Using X-Ray Powder Diffraction Analysis
  • ASTM D1796-11(2016) Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
  • ASTM E1930-02 Standard Test Method for Examination of Liquid Filled Atmospheric and Low Pressure Metal Storage Tanks Using Acoustic Emission
  • ASTM E1930-97 Standard Test Method for Examination of Liquid Filled Atmospheric and Low Pressure Metal Storage Tanks Using Acoustic Emission
  • ASTM D2974-14 Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils
  • ASTM D7709-11 Standard Test Methods for Measuring Water Vapor Transmission Rate (WVTR) of Pharmaceutical Bottles and Blisters
  • ASTM D2974-00 Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils
  • ASTM C1439-13 Standard Test Methods for Evaluating Latex and Powder Polymer Modifiers for use in Hydraulic Cement Concrete and Mortar
  • ASTM C307-99 Standard Test Method for Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings
  • ASTM C307-18 Standard Test Method for Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings
  • ASTM F1929-12 Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration
  • ASTM D4129-05(2020) Standard Test Method for Total and Organic Carbon in Water by High Temperature Oxidation and by Coulometric Detection
  • ASTM C1365-98 Standard Test Method for Determination of the Proportion of Phases in Portland Cement and Portland-Cement Clinker Using X-Ray Powder Diffraction Analysis
  • ASTM C1365-98(2004) Standard Test Method for Determination of the Proportion of Phases in Portland Cement and Portland-Cement Clinker Using X-Ray Powder Diffraction Analysis
  • ASTM D933-84(2012) Standard Practice for Reporting Results of Examination and Analysis of Water-Formed Deposits
  • ASTM D770-95(1999) Standard Specification for Isopropyl Alcohol
  • ASTM D7709-12(2017) Standard Test Methods for Measuring Water Vapor Transmission Rate (WVTR) of Pharmaceutical Bottles and Blisters
  • ASTM D2726-05a Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
  • ASTM D2726/D2726M-14 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
  • ASTM D7237-06 Standard Test Method for Aquatic Free Cyanide with Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection
  • ASTM D2974-07 Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils
  • ASTM D2974-07a Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils
  • ASTM D2974-13 Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils
  • ASTM C1185-08(2016)e1 Standard Test Methods for Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet, Roofing and Siding Shingles, and Clapboards
  • ASTM C1439-19 Standard Test Methods for Evaluating Latex and Powder Polymer Modifiers for use in Hydraulic Cement Concrete and Mortar
  • ASTM C134-95(2016) Standard Test Methods for Size, Dimensional Measurements, and Bulk Density of Refractory Brick and Insulating Firebrick
  • ASTM C1568-08 Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Mechanical Uplift Resistance Method)
  • ASTM C1568-08(2013) Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Mechanical Uplift Resistance Method)
  • ASTM C1745/C1745M-11 Standard Test Method for Measurement of Hydraulic Characteristics of Hydrodynamic Stormwater Separators and Underground Settling Devices
  • ASTM C311-07 Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete
  • ASTM C311/C311M-18 Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete
  • ASTM C311-11a Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete
  • ASTM C311/C311M-22 Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete
  • ASTM C311/C311M-16 Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete
  • ASTM D6683-08 Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids as Function of Compressive Stress
  • ASTM C341-96 Standard Test Method for Length Change of Drilled or Sawed Specimens of Hydraulic-Cement Mortar and Concrete
  • ASTM D4279-95(2022) Standard Test Methods for Water Vapor Transmission of Shipping Containers—Constant and Cycle Methods
  • ASTM D2974-20 Standard Test Methods for Determining the Water (Moisture) Content, Ash Content, and Organic Material of Peat and Other Organic Soils
  • ASTM D2974-20e1 Standard Test Methods for Determining the Water (Moisture) Content, Ash Content, and Organic Material of Peat and Other Organic Soils
  • ASTM D8431-22 Standard Test Method for Detection of Water-soluble Petroleum Oils by A-TEEM Optical Spectroscopy and Multivariate Analysis
  • ASTM D4003-98(2003) Standard Test Methods for Programmable Horizontal Impact Test for Shipping Containers and Systems
  • ASTM D4003-98(2019)e1 Standard Test Methods for Programmable Horizontal Impact Test for Shipping Containers and Systems
  • ASTM D4176-04e1 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
  • ASTM D4176-04 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
  • ASTM D4176-04(2009) Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
  • ASTM D4176-04(2014) Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
  • ASTM D7284-13 Standard Test Method for Total Cyanide in Water by Micro Distillation followed by Flow Injection Analysis with Gas Diffusion Separation and Amperometric Detection
  • ASTM D7284-08 Standard Test Method for Total Cyanide in Water by Micro Distillation followed by Flow Injection Analysis with Gas Diffusion Separation and Amperometric Detection
  • ASTM D7284-08e1 Standard Test Method for Total Cyanide in Water by Micro Distillation followed by Flow Injection Analysis with Gas Diffusion Separation and Amperometric Detection
  • ASTM D7237-15a Standard Test Method for Free Cyanide and Aquatic Free Cyanide with Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection
  • ASTM D4279-95(2017) Standard Test Methods for Water Vapor Transmission of Shipping Containers—Constant and Cycle Methods
  • ASTM D4176-04(2019) Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
  • ASTM D4176-20 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
  • ASTM D4003-98(2015) Standard Test Methods for Programmable Horizontal Impact Test for Shipping Containers and Systems
  • ASTM C311/C311M-13 Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete
  • ASTM C184-94e1 Standard Test Method for Fineness of Hydraulic Cement by the 150-&#181m (No. 100) and 75-&#181m (No. 200) Sieves (Withdrawn 2002)
  • ASTM C1185-03 Standard Test Methods for Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet, Roofing and Siding Shingles, and Clapboards
  • ASTM C1185-08 Standard Test Methods for Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet, Roofing and Siding Shingles, and Clapboards
  • ASTM C1185-08(2012) Standard Test Methods for Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet, Roofing and Siding Shingles, and Clapboards
  • ASTM C786-96 Standard Test Method for Fineness of Hydraulic Cement and Raw Materials by the 300-181m (No. 50), 150-181m (No. 100), and 75-181m (No. 200) Sieves by Wet Methods
  • ASTM C786-96(2003) Standard Test Method for Fineness of Hydraulic Cement and Raw Materials by the 300-956;m (No. 50), 150-956;m (No. 100), and 75-956;m (No. 200) Sieves by Wet Methods
  • ASTM D7284-13(2017) Standard Test Method for Total Cyanide in Water by Micro Distillation followed by Flow Injection Analysis with Gas Diffusion Separation and Amperometric Detection
  • ASTM D7284-20 Standard Test Method for Total Cyanide in Water by Micro Distillation followed by Flow Injection Analysis with Gas Diffusion Separation and Amperometric Detection
  • ASTM C1567-22a Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method)
  • ASTM C1567-23 Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method)
  • ASTM D7237-15 Standard Test Method for Free Cyanide and Aquatic Free Cyanide with Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection
  • ASTM D7237-18 Standard Test Method for Free Cyanide and Aquatic Free Cyanide with Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection
  • ASTM C311-05 Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete
  • ASTM C311-04 Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete
  • ASTM C311-11 Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete
  • ASTM D6986-03 Standard Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures)
  • ASTM D4025-08a Standard Practice for Reporting Results of Examination and Analysis of Deposits Formed from Water for Subsurface Injection
  • ASTM C786/C786M-10(2016) Standard Test Method for Fineness of Hydraulic Cement and Raw Materials by the 300-μm (No. 50), 150-μm (No. 100), and 75-μm (No. 200) Sieves by Wet Methods
  • ASTM C786/C786M-17 Standard Test Method for Fineness of Hydraulic Cement and Raw Materials by the 300-&x3bc;m (No. 50), 150-&x3bc;m (No. 100), and 75-&x3bc;m (No. 200) Sieves by Wet Methods
  • ASTM D5570/D5570M-10 Standard Test Method for Water Resistance of Tape and Adhesives Used as Box Closure
  • ASTM D8193-18 Standard Test Method for Total Oil and Grease (TOG) and Total Petroleum Hydrocarbon (TPH) in Water and Wastewater with Solvent Extraction Using Non-Dispersive Mid-IR Transmission Spectroscopy
  • ASTM D4279-95(2003) Standard Test Methods for Water Vapor Transmission of Shipping Containers-Constant and Cycle Methods
  • ASTM D4279-95 Standard Test Methods for Water Vapor Transmission of Shipping Containers-Constant and Cycle Methods
  • ASTM D5329-20 Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphaltic and Portland Cement Concrete Pavements
  • ASTM C1567-11 Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method)
  • ASTM F2298-03 Standard Test Methods for Water Vapor Diffusion Resistance and Air Flow Resistance of Clothing Materials Using the Dynamic Moisture Permeation Cell
  • ASTM D4176-21a Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
  • ASTM C1745/C1745M-18 Standard Test Method for Measurement of Hydraulic Characteristics of Hydrodynamic Stormwater Separators and Underground Settling Devices
  • ASTM D4279-95(2009) Standard Test Methods for Water Vapor Transmission of Shipping Containers-Constant and Cycle Methods
  • ASTM D5176-91(2003) Standard Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection
  • ASTM D5176-91(1995) Standard Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection
  • ASTM D5176-08 Standard Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection
  • ASTM D6986-03(2016) Standard Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures)
  • ASTM F1430/F1430M-10 Standard Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Aerial Personnel Devices with Supplemental Load Handling Attachments
  • ASTM D6683-19 Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids as Function of Compressive Stress
  • ASTM F2605-08 Standard Test Method for Determining the Molar Mass of Sodium Alginate by Size Exclusion Chromatography with Multi-angle Light Scattering Detection (SEC-MALS)
  • ASTM F2605-16 Standard Test Method for Determining the Molar Mass of Sodium Alginate by Size Exclusion Chromatography with Multi-angle Light Scattering Detection (SEC-MALS)
  • ASTM C786/C786M-10 Standard Test Method for Fineness of Hydraulic Cement and Raw Materials by the 300-956;m (No. 50), 150-956;m (No. 100), and 75-956;m (No. 200) Sieves by Wet Methods
  • ASTM D4129-05 Standard Test Method for Total and Organic Carbon in Water by High Temperature Oxidation and by Coulometric Detection
  • ASTM D4129-05(2012) Standard Test Method for Total and Organic Carbon in Water by High Temperature Oxidation and by Coulometric Detection
  • ASTM D4129-05(2013) Standard Test Method for Total and Organic Carbon in Water by High Temperature Oxidation and by Coulometric Detection
  • ASTM D5329-15 Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphalt Pavements and Portland Cement Concrete Pavements
  • ASTM F3094-14 Standard Test Method for Determining Protection Provided by X-ray Shielding Garments Used in Medical X-ray Fluoroscopy from Sources of Scattered X-Rays
  • ASTM F914/F914M-10 Standard Test Method for Acoustic Emission for Aerial Personnel Devices Without Supplemental Load Handling Attachments
  • ASTM D5176-08(2015) Standard Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection
  • ASTM C311-00 Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use as a Mineral Admixture in Portland-Cement Concrete
  • ASTM C311-00e1 Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use as a Mineral Admixture in Portland-Cement Concrete
  • ASTM C311-02 Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use as a Mineral Admixture in Portland-Cement Concrete
  • ASTM D4839-03(2017) Standard Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxidation, or Both, and Infrared Detection
  • ASTM E3323-22 Standard Test Method for Lipid Quantitation in Liposomal Formulations Using High Performance Liquid Chromatography (HPLC) with an Evaporative Light-Scattering Detector (ELSD)
  • ASTM D6493-11 Standard Test Methods for Softening Point of Hydrocarbon Resins and Rosin Based Resins by Automated Ring-and-Ball Apparatus
  • ASTM D6493-11(2015) Standard Test Methods for Softening Point of Hydrocarbon Resins and Rosin Based Resins by Automated Ring-and-Ball Apparatus
  • ASTM D6023-02 Standard Test Method for Unit Weight, Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low Strength Material (CLSM)
  • ASTM D6023-96 Standard Test Method for Unit Weight, Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low Strength Material (CLSM)
  • ASTM C579-18 Standard Test Methods for Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
  • ASTM C579-01(2012) Standard Test Methods for Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
  • ASTM D5916-96(2002) Standard Test Method for Detection and Enumeration of Clostridium perfringens from Water and Extracted Sediments by Membrane Filtration (MF)
  • ASTM D5916-96 Standard Test Method for Detection and Enumeration of Clostridium perfringens from Water and Extracted Sediments by Membrane Filtration (MF)
  • ASTM C1245/C1245M-03 Standard Test Method for Determining Bond Strength Between Hardened Roller Compacted Concrete and Other Hardened Cementitious Mixtures (Point Load Test)
  • ASTM D6986-03(2010) Standard Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures)
  • ASTM D5329-07 Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphaltic and Portland Cement Concrete Pavements
  • ASTM F1920-98 Standard Test Method for Energy Performance of Rack Conveyor, Hot Water Sanitizing, Commercial Dishwashing Machines
  • ASTM D6888-16 Standard Test Method for Available Cyanides with Ligand Displacement and Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection
  • ASTM D7979-17 Standard Test Method for Determination of Per- and Polyfluoroalkyl Substances in Water, Sludge, Influent, Effluent and Wastewater by Liquid Chromatography Tandem Mass Spectrometry (LC/MS/MS)
  • ASTM D6986-03(2020) Standard Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures)
  • ASTM D5329-96 Standard Test Methods for Sealants and Fillers, Hot-Applied, For Joints and Cracks in Asphaltic and Portland Cement Concrete Pavements
  • ASTM D5329-04 Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphaltic and Portland Cement Concrete Pavements
  • ASTM D5329-09 Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphaltic and Portland Cement Concrete Pavements
  • ASTM D5329-16 Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphalt Pavements and Portland Cement Concrete Pavements
  • ASTM F2227-13(2021) Standard Test Method for Non-Destructive Detection of Leaks in Non-sealed and Empty Packaging Trays by CO2 Tracer Gas Method
  • ASTM D6994-04 Standard Test Method for Determination of Metal Cyanide Complexes in Wastewater, Surface Water, Groundwater and Drinking Water Using Anion Exchange Chromatography with UV Detection
  • ASTM D6994-15 Standard Test Method for Determination of Metal Cyanide Complexes in Wastewater, Surface Water, Groundwater and Drinking Water Using Anion Exchange Chromatography with UV Detection
  • ASTM D4355-99 Standard Test Method for Deterioration of Geotextiles from Exposure to Ultraviolet Light and Water (Xenon-Arc Type Apparatus)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Bulk cement inspection standards and methods

  • GB/T 1346-2001 Test methods for water requirement of normal consistency,setting time and soundness of the portland cements
  • GB/T 1346-2011 Test methods for water requirement of normal consistency, setting time and soundness of the portland cement
  • GB/T 1346-2011(英文版) "Test methods for water requirement of normal consistency,setting time and soundness of the Portland cement"
  • GB/T 5750.4-2006 Standard examination methods for drinking water.Organoleptic and physical parameters
  • GB/T 5750.6-2023 Standard Examination Methods for Drinking Water Part 6: Metal and Metalloid Indicators
  • GB/T 5750.4-2023 Standard Examination Methods for Drinking Water Part 4: Sensory Properties and Physical Indexes
  • GB/T 11939-1989 Standard method for hygienic examination of dinitrobenzene and nitrochlorobenzene in drinking water sources--Gas chromatography

TH-TISI, Bulk cement inspection standards and methods

  • TIS 15.16-1992 Portland cement.part 16: standard methods of sampling and acceptance of hydraulic cement

Korean Agency for Technology and Standards (KATS), Bulk cement inspection standards and methods

  • KS V 7468-2012(2022) Coatings and inspection standard for sea water ballast tanks and double-side skin spaces of bulk carriers
  • KS F 2435-2020 Standard test method for length change of drilled or sawed specimens of cement mortar and concrete

Professional Standard - Urban Construction, Bulk cement inspection standards and methods

  • CJ 26.29-1991 Municipal sewage water quality inspection method standard Determination of total organic carbon non-dispersive infrared method

Standard Association of Australia （SAA）, Bulk cement inspection standards and methods

VN-TCVN, Bulk cement inspection standards and methods

  • TCVN 4031-1985 Cements.Test methods of standard consistency, times of setting and soundness

US-FCR, Bulk cement inspection standards and methods

  • FCR COE CRD-C 144-92-1992 HANDBOOK FOR CONCRETE AND CEMENT STANDARD TEST METHOD FOR RESISTANCE OF ROCK TO FREEZING AND THAWING
  • FCR COE CRD-C 516-71-1971 HANDBOOK FOR CONCRETE AND CEMENT METHOD OF TEST FOR VERIFICATION OF COMPRESSION TESTING MACHINES USING CALIBRATED PROVING RINGS
  • FCR COE CRD-C 49-74-1974 HANDBOOK FOR CONCRETE AND CEMENT SUPPLEMENTARY STANDARD METHODS OF MAKING AND CURING CONCRETE TEST SPECIMENS IN THE LABORATORY
  • FCR COE CRD-C 154-77-1977 HANDBOOK FOR CONCRETE AND CEMENT STANDARD TEST METHOD FOR DETERMINATION OF MOISTURE IN FINE AGGREGATE FOR CONCRETE BY MEANS OF A CALCIUM-CARBIDE GAS PRESSURE METER
  • FCR COE CRD-C 651-95-1995 HANDBOOK FOR CONCRETE AND CEMENT STANDARD GYRATORY TESTING MACHINE METHOD FOR DESIGN OF HOT-MIX BITUMINOUS PAVEMENT MIXTURES
  • FCR COE CRD-C 164-92-1992 HANDBOOK FOR CONCRETE AND CEMENT STANDARD TEST METHOD FOR DIRECT TENSILE STRENGTH OF CYLINDRICAL CONCRETE OR MORTAR SPECIMENS

API - American Petroleum Institute, Bulk cement inspection standards and methods

  • API MPMS 10.8-2005 Manual of Petroleum Measurement Standards Chapter 10-Sediment and Water Section 8-Standard Test Method for Sediment in Crude Oil by Membrane Filtration (Second Edition)

中华人民共和国国家卫生和计划生育委员会, Bulk cement inspection standards and methods

  • GB 11939-1989 Standard methods for hygienic inspection of dinitrobenzenes and nitrochlorobenzenes in source water by gas chromatography

European Committee for Standardization (CEN), Bulk cement inspection standards and methods

  • EN 480-13:2015 Admixtures for concrete, mortar and grout - Test methods - Part 13: Reference masonry mortar for testing mortar admixtures
  • EN 13286-4:2003 Unbound and hydraulically bound mixtures - Part 4: Test methods for laboratory reference density and water content; Vibrating hammer
  • EN 13286-5:2003 Unbound and hydraulically bound mixtures - Part 5: Test methods for laboratory reference density and water content; Vibrating table

RU-GOST R, Bulk cement inspection standards and methods

  • GOST 31.211.42-1983 System of technological arrangement standards. Elements and assembly junction of built up fixtures for assembly and velding. Technical requirements. Acceptance rales. Methods of control. Marking, packing, transportation and storage
  • GOST 31.111.42-1983 Parts and assembly units of universal assembly devices for metal-cutting machines. Technical requirements. Methods of control. Marking, packing, transportation and storage

  Bulk cement inspection standards and methods.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved