ZH
RU
ES

after operating temperature

after operating temperature, Total:430 items.

In the international standard classification, after operating temperature involves: Internal combustion engines, Materials for aerospace construction, Hospital equipment, Welding, brazing and soldering, Ground service and maintenance equipment, Cutting tools, Standardization. General rules, Applications of information technology, Wood-based panels, Electrical accessories, Wind turbine systems and other alternative sources of energy, Equipment for the chemical industry, Plastics, Thermodynamics and temperature measurements, Electrical engineering in general, Packaging and distribution of goods in general, Road vehicle systems, Commercial vehicles, Railway rolling stock, Insulating fluids, Fuels, Lifting equipment, Iron and steel products, Farm buildings, structures and installations, On-board equipment and instruments, Company organization and management, Electronic components in general, Aerospace electric equipment and systems, Waxes, bituminous materials and other petroleum products, Electromechanical components for electronic and telecommunications equipment, Power transmission and distribution networks, HEALTH CARE TECHNOLOGY, Energy and heat transfer engineering in general, Construction of airports, Valves, Lubricants, industrial oils and related products, Hydraulic energy engineering, Electricity. Magnetism. Electrical and magnetic measurements, Plant and equipment for the food industry, Inorganic chemicals, Metalliferous minerals, Solar energy engineering, Rotating machinery, Transport, Services, Cinematography, Shipbuilding and marine structures in general, Aircraft and space vehicles in general, Food products in general, Semiconductor devices, Bearings, Refractories, Electrical wires and cables, Space systems and operations, Test conditions and procedures in general, Vocabularies, Occupational safety. Industrial hygiene, Construction materials, Road engineering, Astronomy. Geodesy. Geography, Installations in buildings, Road vehicles in general, Gas and steam turbines. Steam engines, Ventilators. Fans. Air-conditioners, Environmental testing, Paints and varnishes, Products of the textile industry, Medical equipment, Software development and system documentation, Audio, video and audiovisual engineering, Electrical and electronic testing, Fertilizers, Protection of and in buildings, Protection against fire, Railway engineering in general, Pipeline components and pipelines, Environmental protection, Refrigerating technology, Shop fittings, Nuclear energy engineering, Dentistry, Domestic, commercial and industrial heating appliances, Rubber and plastics products, Vibrations, shock and vibration measurements, Products of the chemical industry, Physical planning. Town planning, Pulps, Paper and board, Physics. Chemistry, Networking, Natural gas.

NZ-SNZ, after operating temperature

SNZ TR 5058-2009 Temperature rerating of PVC pressure pipes operating at elevated temperatures
NZS 8719:1992 MEASUREMENT OF THE FIBRE LENGTH AFTER CARDING OF SCOURED WOOL

Korean Agency for Technology and Standards (KATS), after operating temperature

KS B 6007-2004 Temperature measurements of performance forreciprocating internal combustion engines
KS B 6007-2014 Temperature measurements of performance forreciprocating internal combustion engines
KS W 0646-1994(2009) Airplane strength and rigidity, flight ground operation tests
KS L 6518-2018 Maximum operating speed of grinding wheels
KS L 6518-1983 Maximum operating speed of grinding wheels
KS M ISO 2578:2022 Plastics — Determination of time-temperature limits after prolonged exposure to heat
KS T 1381-2018 General specifications of testing of temperature controlled transport packages for parcel shipping
KS M ISO 2578-2007(2017) Plastics－Determination of time－temperature limits after prolonged exposure to heat
KS M ISO 2578:2007 Plastics－Determination of time－temperature limits after prolonged exposure to heat
KS R 5023-2005(2010) Flexible shafts for speedometers and tachographs of automobiles
KS T 5012-2020 Packaging — Complete, filled transport packages —Requirements of passive type packaging for temperature controlled transport of pharmaceuticals
KS V ISO 15016:2005 Guidelines for the assessment of speed and power performance by analysis of speed trial data
KS K ISO 6925-2007(2017) Textile floor coverings－Burning behaviour－Tablet test at ambient temperature
KS M ISO 2884-2:2021 Paints and varnishes — Determination of viscosity using rotary viscometers — Part 2: Disc or ball viscometer operated at a specified speed
KS M ISO 2884-2-2011(2016) Paints and varnishes－Determination of viscosity using rotary viscometers－Part 2：Disc or ball viscometer operated at a specified speed
KS P ISO 13078:2019 Dentistry — Dental furnace — Test method for temperature measurement with separate thermocouple
KS M ISO 14427-2010(2020) Carbonaceous materials used in the production of aluminium－Cold and tepid ramming pastes－Preparation of unbaked test specimens and determination of apparent density after compaction
KS C IEC 61133:2002 Electric traction－Rolling stock－Test methods for electric and thermal/electric rolling stock on completion of construction and before entry into service

CZ-CSN, after operating temperature

CSN 25 8304 Za-1991
CSN 25 8151-1988 Thermometers for kinematic viscosity of oils
CSN 31 6814-1954
CSN 25 8304 Zb-1983
CSN 25 8160-1966 Thermometers for determination of viscosity by means of Vogel-Ossag viscometer
CSN 30 0580-1973 Testing of road vehicles for motor transport after generál overhaul
CSN 25 8135-1965 Glass thermometers. Three-member set of laboratory glass thermometers, covering the overall temperature ranges 0 φC to +300 φC, with checking zeros
CSN 25 8138-1965 Glass thermometers. Seven-member set of laboratory glass thermometers, covering the overall temperature ranges -10 grad C to +360 grad C, with checking zeros

Defense Logistics Agency, after operating temperature

DLA QPL-19-60 NOTICE 1-2007 Resistor, Variable, Wire-Wound (Low Operating Temperature), General Specification for
DLA MIL-DTL-83733 E-2006 CONNECTORS, ELECTRICAL MINIATURE, RECTANGULAR TYPE, RACK TO PANEL, ENVIRONMENT RESISTING, 200 DEGREES C TOTAL CONTINUOUS OPERATING TEMPERATURE, GENERAL SPECIFICATION FOR
DLA QPL-83733-9-2006 CONNECTORS, ELECTRICAL, MINIATURE, RECTANGULAR TYPE, RACK TO PANEL, ENVIRONMENT RESISTING, 200 DEG.C TOTAL CONTINUOUS OPERATING TEMPERATURE, GENERAL SPECIFICATION FOR
DLA MS28131 REV H-2012 TRANSMITTER, PRESSURE, SYNCHRO, AIRCRAFT 320 DEGREE MOVEMENT, HIGH TEMPERATURE (177 DEG C) GENERAL PURPOSE

Professional Standard - Electricity, after operating temperature

DL/T 2150-2020 Technical specification for operating temperature monitoring device of substation equipment
DL/T 516-2017 Electric power dispatch automation operation management regulations
DL/T 2247.1~2247.5-2021 Dispatch operation management of electrochemical energy storage power station
DL/T 2247.1～2247.5-2021 Dispatch operation management of electrochemical energy storage power station
DL/T 516-2006 Code for operation and administration of power dispatching automation system
DL/T 2314-2021 Power plant side energy storage system scheduling operation management specification
DL 516-1993 Power Grid Dispatching Automation System Operation Management Regulations
DL/T 1981.11-2021 Unified Power Flow Controller Part 11: Scheduling Operation Procedures
DL/T 2288-2021 Operation and maintenance procedures for hydropower station reservoir dispatching automation system
DL/T 1709.8-2017 Smart Grid Dispatch Control System Technical Specification Part 8: Operation Evaluation
DL/T 1709.7-2017 Smart Grid Dispatch Control System Technical Specification Part 7: Grid Operation Cockpit

API - American Petroleum Institute, after operating temperature

API PUBL 4542-1992 Temperature@ Reid Vapor Pressure and Gasohol Effects on Running Losses
API MPMS 7.4-1993 Manual of Petroleum Measurement Standards Chapter 7 - Temperature Determination Section 4 - Static Temperature Determination Using Fixed Automatic Tank Thermometers
API MPMS 7.3-1985 Manual of Petroleum Measurement Standards Chapter 7 - Temperature Determination Section 3 - Static Temperature Determination Using Portable Electronic Thermometers (First Edition)
API MPMS 7.1-1991 Manual of Petroleum Measurement Standards Chapter 7 - Temperature Determination Section 1 - Static Temperature Determination Using Mercury-in-Glass Tank Thermometers (First Edition; Supersedes STD 2543)

HU-MSZT, after operating temperature

American Society for Testing and Materials (ASTM), after operating temperature

ASTM D2532-14 Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants
ASTM E3301-22 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers Using Thermal Lag
ASTM D2532-93(1998) Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants
ASTM D2532-22 Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants
ASTM D2532-03 Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants
ASTM F3397/F3397M-21 Standard Practice for Aeroplane Turbine Fuel System Hot Weather Operations
ASTM C1737-22 Standard Guide for Evaluating Temperature Effects to Aerosol Foam Sealant During and After Dispensing
ASTM C1737-10(2016) Standard Guide for Evaluating Temperature Effects to Aerosol Foam Sealant During and After Dispensing
ASTM C1737-16 Standard Guide for Evaluating Temperature Effects to Aerosol Foam Sealant During and After Dispensing
ASTM D4402-06 Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer
ASTM C1058-03 Standard Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation
ASTM C1058/C1058M-10(2015) Standard Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation
ASTM C1737-10 Standard Guide for Evaluating Temperature Effects to Aerosol Foam Sealant During and After Dispensing
ASTM C1737-23 Standard Guide for Evaluating Temperature Effects to Aerosol Foam Sealant During and After Dispensing
ASTM E1214-87(2000) Standard Guide for Use of Melt Wire Temperature Monitors for Reactor Vessel Surveillance, E706(IIIE)
ASTM E1214-11e1 Standard Guide for Use of Melt Wire Temperature Monitors for Reactor Vessel Surveillance
ASTM C651-91(2000) Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
ASTM E2488-22 Standard Guide for the Preparation and Evaluation of Liquid Baths Used for Temperature Calibration by Comparison

SE-SIS, after operating temperature

SIS 16 22 21-1974 Rubber. Determination of temperature of retraction after freezing
SIS SS-ISO 3146:1987 Plastics - Determination of the melting behaviour (melting tern perature or melting range) of semi-crystalline polymers

Group Standards of the People's Republic of China, after operating temperature

T/HBSYYXH T/HBSYYXH0001-2022 Guide to the construction and operation of intelligent logistics in hospitals
T/CASME 727-2023 Specifications for construction and operation of smart campus logistics bath system
T/CCGA 20004-2021 Safety technical regulation of design and operation for cryogenic enclosures
T/CEC 182-2018 Grid-connected dispatching operation specification for microgrid
T/QDAS 010-2018 Rules for inspecting and testing of Modern Guided Tram on completion of construction and before entry into service
T/CCIAA 6-2021 Technical code for coke oven longitudinal temperature determination
T/SDAS 13-2017 Information technology service Specification for operating maintenance cost metrics
T/CEC 462-2021 Operation and maintenance regulations for prefabricated cabin electrochemical energy storage power stations in cold temperate regions
T/CSEE 0081.4-2022 Unified Power Flow Controller (UPFC) Part 4: Scheduling Operation Specifications
T/CAMET 04015-2019 Technical specification for train operation speed restriction and its matching of urban rail transit
T/CECRPA 002-2022 Guidelines for air pollutants and greenhouse gases co-control effect evaluation in Transportation sector
T/IAC 35-2019 Development and operation capability maturity model based on cloud computing platform in insurance industry
T/CECS 20005-2021 Guidelines for the design and operation management of sludge deep dewatering process in urban sewage treatment plants
T/CSMPTE 7-2020 Maturity Model and Assessment Rules for Operation and Maintenance Service Capability of TV Station Information System

Institute of Interconnecting and Packaging Electronic Circuits (IPC), after operating temperature

IPC TR-585-2006 Time, Temperature and Humidity Stress of Final Board Finish Solderability

German Institute for Standardization, after operating temperature

DIN 15022:1979-09 Cranes; lifting hights, operating speeds
DIN EN ISO 2578:1998-10 Plastics - Determination of time-temperature limits after prolonged exposure to heat (ISO 2578:1993); German version EN ISO 2578:1998
DIN EN 13486:2022-08 Temperature recorders and thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods - Periodic verification; German and English version prEN 13486:2022 / Note: Date of issu...
DIN 50969-3:2018-06 Prevention of hydrogen-induced brittle fracture of high-strength steel building elements - Part 3: Post operational influences and extended testing
DIN EN 13485:2022-08 Thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods - Tests, performance, suitability; German and English version prEN 13485:2022 / Note: Date of issue 2022-07-15*Int...
DIN EN 61868:1999 Mineral insulating oils - Determination of kinematic viscosity at very low temperatures (IEC 61868:1998); German version EN 61868:1999
DIN EN 12830:2018 Temperature recorders for the transport, storage and distribution of temperature sensitive goods - Tests, performance, suitability
DIN EN 12830:2018-10 Temperature recorders for the transport, storage and distribution of temperature sensitive goods - Tests, performance, suitability; German version EN 12830:2018
DIN 15575:1985 Pilot frequency recording; pilot frequency, running speed, track positions, magnetization
DIN 732:2010 Rolling bearings - Thermally safe operating speed - Calculation and correction values
DIN 732:2010-05 Rolling bearings - Thermally safe operating speed - Calculation and correction values
DIN 15577:1982-08 Frame frequency and film running speed for exposure and projection of motion-picture films
DIN EN 13486:2002-02 Thermometer recorders and thermometers for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream - Periodic verification; German version EN 13486:2001 / Note: To be replaced by DIN EN 13486 (2022-08).
DIN EN ISO 10079-1/A1:2016 Medical suction equipment - Part 1: Electrically powered suction equipment - Amendment 1: Changes to requirements for operating at extremes of temperature (ISO 10079-1:2015/DAM 1:2016); German and English version EN ISO 10079-1:2015/prA1:2016
DIN 58948-17:2016-10 Sterilization - Low temperature sterilizers - Part 17: Requirements for the installation and operation of low temperature steam formaldehyde and formaldehyde sterilizers and their supply sources
DIN CEN/TR 15404:2010-11*DIN SPEC 1151:2010-11 Solid recovered fuels - Methods for the determination of ash melting behaviour by using characteristic temperatures; German version CEN/TR 15404:2010
DIN EN 1704:1997-03 Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after temperature cycling under bending; German version EN 1704:1997
DIN EN 17066-1:2019 Insulated means of transport for temperature sensitive goods - Requirements and testing - Part 1: Container
DIN EN 13486:2002 Thermometer recorders and thermometers for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream - Periodic verification; German version EN 13486:2001
DIN EN ISO 4589-2:2017-11 Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:2017); German version EN ISO 4589-2:2017
DIN EN 15921:2011 Fertilizers - Extraction of soluble phosphorus according to Petermann at 65 °C; German version EN 15921:2011
DIN EN 17066-1:2019-10 Insulated means of transport for temperature sensitive goods - Requirements and testing - Part 1: Container; German version EN 17066-1:2019
DIN 53829-1:2014-12 Testing of textiles - Determination of the evenness of filament yarns - Part 1: Testing of the force and extension on the running yarn, principles
DIN EN 1704:1997 Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after temperature cycling under bending; German version EN 1704:1997
DIN EN 3475-415:2007 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 415: Rapid change of temperature; German and English version EN 3475-415:2005
DIN EN ISO 13078:2013-05 Dentistry - Dental furnace - Test method for temperature measurement with separate thermocouple (ISO 13078:2013); German version EN ISO 13078:2013
DIN EN 13485:2002-02 Thermometers for measuring the air and product temperature for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream - Test, performance, suitability; German version EN 13485:2001 / Note: To be replaced...
DIN EN ISO 12759-4:2020-05 Fans - Efficiency classification for fans - Part 4: Driven fans at maximum operating speed (ISO 12759-4:2019); German version EN ISO 12759-4:2019
DIN 54386:1994 Testing of paper, board and pulp; photometric determination of the copper content with bathocuproin; determination after decomposition with nitric acid
DIN 15578-2:1978-07 Length-measuring of perforated motion-picture films and magnetic tapes; tabels of running times 1 to 60 s in relation to film length
DIN EN 13485:2002 Thermometers for measuring the air and product temperature for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream - Test, performance, suitability; German version EN 13485:2001
DIN 28161:2006-12 Requirements on agitator drives - Agitator speed and direction, bearing application running accuracy, dis-mounting space for shaft seal
DIN 15578-3:1978-07 Length-measuring of perforated motion-picture films and magnetic tapes; tables of running times 1 to 120 min in relation to film length

GB-REG, after operating temperature

REG NASA-LLIS-6636-2012 Conduct a Final Mechanical Walkdown Prior to Spacecraft Integration with the Launch Vehicle
REG NASA-TM-X-62197-1973 Wind-tunnel investigation of a large-scale 25 degrees swept-wing jet transport model with an external blowing triple-slotted flap

Liaoning Provincial Standard of the People's Republic of China, after operating temperature

DB21/T 2174.3-2013 Operation and Management of the Public Service Network Part 3: Background Operations

ABS - American Bureau of Shipping, after operating temperature

ABS 151 CORR-2008 GUIDE FOR VESSELS OPERATING IN LOW TEMPERATURE ENVIRONMENTS
ABS 151 CORR-2012 GUIDE FOR VESSELS OPERATING IN LOW TEMPERATURE ENVIRONMENTS
ABS 151 NOTICE 1-2014 GUIDE FOR VESSELS OPERATING IN LOW TEMPERATURE ENVIRONMENTS
ABS 151-2010 GUIDE FOR VESSELS OPERATING IN LOW TEMPERATURE ENVIRONMENTS
ABS 151-2015 GUIDE FOR VESSELS OPERATING IN LOW TEMPERATURE ENVIRONMENTS

International Organization for Standardization (ISO), after operating temperature

ISO 20585:2005 Wood-based panels - Determination of wet bending strength after immersion in water at 70℃ or 100℃ (boiling temperature)
ISO 2578:1974 Plastics — Determination of time-temperature limits after exposure to prolonged action of heat
ISO 2578:1993 Plastics; determination of time-temperature limits after prolonged exposure to heat
ISO 6500:1980 Powered industrial trucks; Service brakes; Component strength-performance requirements
ISO/TS 13471-2:2022 Acoustics — Temperature influence on tyre/road noise measurement — Part 2: Correction for temperature when testing with the pass-by methods
ISO 675:1979 Textiles; Woven fabrics; Determination of dimensional change on commercial laundering near the boiling point
ISO 675:2014 Textiles - Woven fabrics - Determination of dimensional change on commercial laundering near the boiling point
ISO 3024:1975 Title missing - Legacy paper document
ISO 3024:1983 Cinematography; Motion-picture camera cartridge, 8 mm type S, model 1; Camera run length, perforation cut-out and end-of-run notch in film; Specifications
ISO 12759-3:2019 Fans — Efficiency classification for fans — Part 3: Fans without drives at maximum operating speed
ISO 675:1979/Cor 1:1990 Textiles; woven fabrics; determination of dimensional change on commercial laundering near the boiling point; technical corrigendum 1
ISO 2863:1973 Cinematography; Motion-picture camera cartridge, 8 mm Type S Model II; Run length of film; Dimensions and specifications
ISO 12759-4:2019 Fans — Efficiency classification for fans — Part 4: Driven fans at maximum operating speed
ISO/CD 14427:2023 Carbonaceous materials used in the production of aluminium — Cold and tepid ramming pastes — Preparation of unbaked test specimens and determination of apparent density after compaction
ISO/DIS 14427:2023 Carbonaceous materials used in the production of aluminium — Cold and tepid ramming pastes — Preparation of unbaked test specimens and determination of apparent density after compaction

National Metrological Technical Specifications of the People's Republic of China, after operating temperature

JJF 1007-1987 Temperature Metrological Terms and Their Definitions

Professional Standard - Energy, after operating temperature

NB/T 31047-2013 Specification of dispatching and operating management for wind power
NB/T 31065-2015 Rules for dispatching and operating of wind farm
DL/T 2247.1-2021 Electrochemical energy storage power station dispatching operation management part 1: dispatching procedures
DL/T 2247.2-2021 Electrochemical energy storage power station dispatching operation management part 2: dispatching naming
NB/T 31047.2-2022 Wind power dispatching and operation management specifications Part 2: Offshore wind power
NB/T 31047.1-2022 Wind power dispatching and operation management specifications Part 1: Onshore wind power
DL/T 2247.5-2021 Electrochemical energy storage power station dispatching operation management part 5: emergency response
DL/T 2247.3-2021 Dispatching operation management of electrochemical energy storage power station Part 3: Real-time monitoring and control at the dispatching end
DL/T 2247.4-2021 Electrochemical energy storage power station dispatching operation management part 4: dispatching end and monitoring system detection of energy storage power station

National Metrological Verification Regulations of the People's Republic of China, after operating temperature

JJG(轻工) 5-1989 Regulations for verification of bicycle front and rear fork precision measuring shafts
JJG(民航) 007-1995 Verification Regulation of Temperature Indicator Test Bench "УПТ-1M"
JJG(轻工) 29-1989 Verification rules for bicycle front and rear axle sensitivity test gages
JJG(轻工) 26-1989 Regulations for verification of photoelectric counters for sensitivity of front and rear axles of bicycles
JJG(民航) 032-1996 Verification Regulation of Model 871A Digital Thermometer
JJG(民航) 049-1999 Verification Regulation of Model H-294 Multirange Tempcal Tester

KR-KS, after operating temperature

KS M ISO 2578-2022 Plastics — Determination of time-temperature limits after prolonged exposure to heat
KS M ISO 2884-2-2021 Paints and varnishes — Determination of viscosity using rotary viscometers — Part 2: Disc or ball viscometer operated at a specified speed
KS P ISO 13078-2019 Dentistry — Dental furnace — Test method for temperature measurement with separate thermocouple

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, after operating temperature

GB/T 7142-2002 Determination of time-temperature limits for plasties after prolonged exposure to heat
GB/T 4857.2-1992 Packaging Transport packages Temperature and humidity conditioning
GB/T 7605-1987 Determination of clemulsibility characteristics of turbine oils in service
GB/T 7605-2008 Determination of clemulsibility characteristics of turbine oils in service
GB/T 28827.7-2022 Information technology service—Operations and maintenance—Part 7：Cost measurement specification
GB/T 4857.2-2005 Packaging-Basic tests for transport packages-Part 2:Temperature and humidity conditioning
GB/T 13477.12-2002 Test method for building sealants Part 12: Determination of adhesion/cohesion properties at constant temperature

CL-INN, after operating temperature

RU-GOST R, after operating temperature

GOST R 41.58-2001 Uniform provisions concerning the type approval of: I. Rear underrun protective devices (RUPDs); II. Vehicles with regard to the installation of a RUPD of an approved type; III. Vehicles with regard to their rear underrun protection (RUP)
GOST 13800-1980 Resistance temperature transducers for means of transport. General specifications
GOST 27446-1987 Iron ores, aglomerates and pellets. Method for determination of strength after low-temperature static reduction
GOST 4.165-1985 Product-quality index system. Temperature regulators operating without outside energy source, sensor-relays. Nomenclature of mdices
GOST 29236-1991 Ammonia solution for industrial use. Determination of residue after evaporation at 105 °C. Gravimetric method
GOST 25431-1982 Table of dynamic pressures and stagnation temperatures of air as a function of Mach number and flight altitude
GOST 11279.7-1983 Organic dyes. Testing methods of colour fastness to temperature processing in different media
GOST R ISO 16322-1-2013 Textiles. Determination of spirality after laundering. Part 1. Percentage of wale spirality change in knitted garments
GOST R 56941-2016 Temperature recorders and thermometers for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream. Periodic verification
GOST R 57114-2016 United power system and isolated power systems. Electric power systems. Operational dispatching control in power industry and operational technological control. Terms and definitions
GOST R 54899-2012 Centralised traffic and dispatching control systems movement of trains. Safety requirements and methods of checking
GOST 5212-1974 Table, aerodynamic. Dynamic pressures and temperatures of braking air for flight velocity from 10 km/h to 4000 km/h

工业和信息化部, after operating temperature

YD/T 3091-2016 Requirements and methods for post-operation evaluation of 240V/336V DC power supply systems for communications
YB/T 4794-2019 Technical specifications for high-concentration operation of iron tailings

Military Standard of the People's Republic of China-General Armament Department, after operating temperature

GJB 8326-2015 Post-processing procedures for missile and launch vehicle flight test external test data
GJB 1851-1993 Appropriate and safe temperature requirements for pilots to inhale oxygen
GJB 2021-1994 Design requirements for six-degree-of-freedom motion system of flight simulator
GJB 573.17-1988 Fuze environment and performance test methods Transportation vibration-temperature test
GJB 1264.4-1994 Test method for aviation turbine engine lubricating oil. Method for determination of viscosity and viscosity change after standing at low temperature.
GJB 844.10-1991 Submarine Nuclear Power Plant Operation Safety Regulations Operator License System Requirements

British Standards Institution (BSI), after operating temperature

PD IEC/TR 62240-1:2018 Tracked Changes. Process management for avionics. Electronic components capability in operation. Temperature uprating
BS EN 61868:1999 Mineral insulating oils. Determination of kinematic viscosity at very low temperatures
22/30454354 DC BS EN 13486. Temperature recorders and thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods. Periodic verification
BS EN ISO 2578:1999 Plastics. Determination of the time-temperature limits after prolonged exposure to heat
BS EN 10314:2002 Method for the derivation of minimum values of proof strength of steel at elevated temperatures
22/30454351 DC BS EN 13485. Thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods. Tests, performance, suitability
BS EN ISO 2578:1993 Plastics - Determination of the time-temperature limits after prolonged exposure to heat
BS 3G 148:1981 Specification for general purpose platinum temperature sensors for aircraft
BS ISO 19357:2016 Ships and marine technology. Marine cranes. Design requirements for low temperature operation
BS EN 12830:2018 Tracked Changes. Temperature recorders for the transport, storage and distribution of temperature sensitive goods. Tests, performance, suitability
PD IEC TS 63126:2020 IEC 63126:2020/CR1:2022 Guidelines for qualifying PV modules, components and materials for operation at high temperatures
BS ISO 26872:2019 Space systems. Disposal of satellites operating at geosynchronous altitude
BS 5685-8:1991 Electricity meters - Specification for impulse operated multiple registers for use with induction electricity meters
BS EN ISO 12759-4:2019 Fans. Efficiency classification for fans - Driven fans at maximum operating speed
BS EN 13486:2002 Temperature recorders and thermometers for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream - Periodic verification
BS ISO 675:2014 Textiles. Woven fabrics. Determination of dimensional change on commercial laundering near the boiling point
BS 5422:2023 Thermal insulating materials for pipes, tanks, vessels, ductwork and equipment operating within the temperature range –40 °C to +700 °C. Method for specifying
BS EN 1704:1997 Plastics piping systems. Thermoplastics valves. Test method for the integrity of a valve after temperature cycling under bending
BS EN 17066-1:2019 Insulated means of transport for temperature sensitive goods. Requirements and testing - Container
22/30410783 DC BS 5422. Methods for specifying thermal insulating materials for pipes, tanks, vessels, ductwork and equipment operating within the temperature range -40°C to +700°C
BS DD CEN/TS 15213-1:2005 Road transport and traffic telematics — After-theft systems for the recovery of stolen vehicles — Part 1: Reference architecture and terminology
BS DD CEN/TS 15213-1:2006 Road transport and traffic telematics. After-theft systems for the recovery of stolen vehicles. Reference architecture and terminology
BS EN ISO 2884-2:2006 Paints and varnishes. Determination of viscosity using rotary viscometers. Disc or ball viscometer operated at a specified speed
BS EN 15921:2011 Fertilizers. Extraction of soluble phosphorus according to Petermann at 65 °C
19/30369159 DC BS EN 60891. Photovoltaic devices. Procedures for temperature and irradiance corrections to measured I-V characteristics
BS PD CEN/TR 15404:2010 Solid recovered fuels — Methods for the determination of ash melting behaviour by using characteristic temperatures
BS EN IEC 60891:2021 Tracked Changes. Photovoltaic devices. Procedures for temperature and irradiance corrections to measured I-V characteristics
BS EN 13485:2001 Thermometers for measuring the air and product temperature for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream - Tests, performance, suitability
BS EN 13485:2012 Thermometers for measuring the air and product temperature for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream - Tests, performance, suitability
BS EN 3745-402:2005 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 402: Temperature cycling
DD CEN/TS 15404:2006 Solid recovered fuels — Methods for the determination of ash melting behaviour by using characteristic temperatures
PD CEN/TR 15404:2010 Prevention of crime — Urban planning and building design Pat 7: Design and management of public transport facilities
BS EN 478:1999 Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Appearance after exposure at 150 °C - Test method
BS DD CEN/TS 15404:2006 Solid recovered fuels. Methods for the determination of ash melting behaviour by using characteristic temperatures
BS EN 3545-007:2005 Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 ℃ to 175 ℃ — Part 007: Cable clamp — Product standard
BS EN 3545-007:2006 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Cable clamp - Product standard

International Electrotechnical Commission (IEC), after operating temperature

IEC 61868:1998 Mineral insulating oils - Determination of kinematic viscosity at very low temperatures
IEC 61133:2016 Railway applications - Rolling stock - Testing of rolling stock on completion of construction and before entry into service
IEC 61133:2006 Railway applications - Rolling stock - Testing of rolling stock on completion of construction and before entry into service
IEC TR 62240-1:2013 Process management for avionics - Electronic components capability in operation - Part 1: Temperature uprating
IEC TR 62240-1:2018 RLV Process management for avionics - Electronic components capability in operation - Part 1: Temperature uprating
IEC TR 62240-1:2018 Process management for avionics - Electronic components capability in operation - Part 1: Temperature uprating
IEC TS 63126:2020 Guidelines for qualifying PV modules, components and materials for operation at high temperatures
IEC TS 63126:2020/COR1:2022 Corrigendum 1 - Guidelines for qualifying PV modules, components and materials for operation at high temperatures
IEC 61133:1992 Electric traction; rolling stock; test methods for electric and thermal/electric rolling stock on completion of construction and before entry into service

AENOR, after operating temperature

UNE-EN 61868:1999 MINERAL INSULATING OILS. DETERMINATION OF KINEMATIC VISCOSITY AT VERY LOW TEMPERATURES.
UNE-EN ISO 2578:1999 PLASTICS - DETERMINATION OF TIME-TEMPERATURE LIMITS AFTER PROLONGED EXPOSURE TO HEAT (ISO 2578:1993)
UNE 82500:1995 EX TEMPERATURE RECORDERS FOR THE TRANSPORT, STORAGE AND DISTRIBUTION OF FROZEN AND DEEP-FROZEN PRODUCTS.
UNE 82500:1997 EX/1M EX TEMPERATURA RECORDERS FOR THE TRANSPORT, STORAGE AND DISTRIBUTION OF FROZEN AND DEEP-FROZEN PRODUCTS.
UNE-EN 60891:2010 Photovoltaic devices - Procedures for temperature and irradiance corrections to measured I-V characteristics
UNE-EN 13486:2002 Temperature recorders and thermometers for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream. Periodic verification.
UNE 40462:1983 TEXTILE FLOOR COVERINGS. BURNING BEHAVIOUR. TABLET TES AT AMBIENT TEMPERATURE
UNE-EN 1704:1997 PLASTICS PIPING SYSTEMS. THERMOPLASTICS VALVES. TEST METHOD FOR THE INTEGRITY OF A VALVE AFTER TEMPERATURE CYCLING UNDER BENDING.
UNE-EN 13485:2002 Thermometers for measuring the air and product temperature for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream. Tests, performance, suitability.

CN-QIYE, after operating temperature

Q/GDW 1997-2013 Photovoltaic power generation dispatching operation management specification
Q/GDW 114-2004 National Power Dispatching Data Network Backbone Network Operation Management Regulations

Association of German Mechanical Engineers, after operating temperature

VDI 2397-2000 Selection of operational speeds for overhead travelling cranes

YU-JUS, after operating temperature

JUS G.S2.147-1990 Rubber, vulcanized. Determination of stress relaxation in compression at. ambient and at elevated temperatures
JUS N.C7.115-1982 Windingwires. Enamelled round copper vvires with a temperature index of 180. Technical requirements for manu facturing and delivery

Shandong Provincial Standard of the People's Republic of China, after operating temperature

DB37/T 2429-2013 Technical conditions for safe operation of roller blinds in solar greenhouses

CH-SNV, after operating temperature

VSM 18725.2-1965

Danish Standards Foundation, after operating temperature

DS/EN ISO 2578:1999 Plastics - Determination of time-temperature limits after prolonged exposure to heat
DS/EN 61868:1999 Mineral insulating oils - Determination of kinematic viscosity at very low temperatures
DS/ISO 6500:1980 Powered industrial trucks. Service brakes. Component strength. Performance requirements
DS/EN 60891:2010 Photovoltaic devices - Procedures for temperature and irradiance corrections to measured I-V characteristics
DS/CEN/TR 15762:2008 Road transport and traffic telematics - Electronic fee collection (EFC) - Ensuring the correct function of EFC equipment installed behind metallised windshield
DS/EN 13486:2002 Temperature recorders and thermometers for the transport, storage and distribution of chilled, frozen, deep-forzen/quick-frosen food and ice cream - Periodic verification
DS/EN ISO 4589-2:1999 Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test
DS/EN 1704:1997 Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after temperature cycling under bending
DS/CEN/TR 15404:2010 Solid recovered fuels - Methods for the determination of ash melting behaviour by using characteristic temperatures
DS/EN 13485:2002 Thermometers for measuring the air and product temperature for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream - Tests, performance, suitability
DS/EN 2931:1994 Aerospace series - Bolts,T-head,relieved shank,long thread, in heat resisting steel FE-PA92HT(A286) - Classification:900 MPa (at ambient temperature)/650 dregree

Professional Standard - Petrochemical Industry, after operating temperature

NB/SH/T 0837-2010 Mineral insulating oils-Determination of kinematic viscosity at very low temperatures

Institute of Electrical and Electronics Engineers (IEEE), after operating temperature

IEEE Std C57.154-2022 IEEE Standard for Liquid-Immersed Transformers Designed to Operate at Temperatures Above Conventional Limits Using High- Temperature Insulation Systems
IEEE PC57.154/D8, March 2022 IEEE Draft Standard for Liquid-Immersed Transformers Designed to Operate at Temperatures Above Conventional Limits Using High-Temperature Insulation Systems.
IEEE PC57.154/D7, October 2021 IEEE Draft Standard for Liquid-Immersed Transformers Designed to Operate at Temperatures Above Conventional Limits Using High-Temperature Insulation Systems.
ST 200:2003 ST 200:2003 - SMPTE Standard - For Motion-Picture Film (8-mm Type S) — Model 1 Sound Camera Cartridge — Camera Run Length, Perforation Cutout and End-of-Run Notch
IEEE PC57.154/D9.2, June 2012 IEEE Draft Standard for the Design, Testing and Application of Liquid-Immersed Distribution, Power and Regulating Transformers Using High-Temperature Insulation Systems and Operating at Elevated Temperatures
IEEE PC57.154/D9, March 2012 IEEE Draft Standard for the Design, Testing and Application of Liquid-Immersed Distribution, Power and Regulating Transformers Using High-Temperature Insulation Systems and Operating at Elevated Temperatures
IEEE PC57.154/D9.1, Jun 2012 Ieee draft standard for the design, testing and application of liquid-immersed distribution, power and regulating transformers using high-temperature insulation systems and operating at elevated temperatures

ESDU - Engineering Sciences Data Unit, after operating temperature

ESDU 69012 B-1973 Effects of kinetic heating on equilibrium temperature of flight vehicles.
ESDU 93020-1993 Computation of static pressure downstream of a normal shock for hypersonic flight (ambient temperature known).
ESDU 84007 A-1991 The treatment of calibrations of total air temperature probes for use in flight-test analysis work.

FI-SFS, after operating temperature

SFS 3954-1977

Aerospace Industries Association/ANSI Aerospace Standards, after operating temperature

AIA/NAS NAS 547-1992 Fastener; Rotary, Quick- Operating High Strength (Rev. 4)

国家能源局, after operating temperature

NB/T 31109-2017 Wind farm dispatching and operation information exchange specifications
NB/T 10084-2018 Guidelines for preparation of operation and dispatch procedures for hydropower projects
NB/T 10403-2020 Operation and management specifications for large and medium-sized medium-temperature anaerobic fermentation and power generation units

PL-PKN, after operating temperature

PN S48300-1992 Rear underrum protection of motor vehicles their trailers. Requirements and tests
PN C89082-15-1987 Unsaturated polyester resins Methods of testing Determination of gel time after adding of initiation system at temperatur?25 and 80° C

Shanghai Provincial Standard of the People's Republic of China, after operating temperature

DB31/T 726-2013 Safety and energy-saving operation management standards for high-temperature fire-fighting smoke exhaust fans
DB31/T 656-2021 Evaluation index for energy-saving operation of aluminum and aluminum alloy melting and holding furnaces

Association Francaise de Normalisation, after operating temperature

NF T51-225*NF EN ISO 2578:1998 Plastics. Determination of time-temperature limits after prolonged exposure to heat.
NF EN 61868:1999 Huiles minérales isolantes - Détermination de la viscosité cinématique à très basse température
NF E18-150*NF EN 12830:2018 Temperature recorders for the transport, storage and distribution of temperature sensitive goods - Tests, performance, suitability
NF EN ISO 2578:1998 Plastiques - Détermination des limites temps-températures après exposition à l'action prolongée de la chaleur
NF T20-555:1989 Hydrogen peroxide for industrial use. Determination of amount of decomposition rate after 16 H at 96 degrees C.
NF ISO 815-1:2020 Caoutchouc vulcanisé ou thermoplastique - Détermination de la déformation rémanente après compression - Partie 1 : à températures ambiantes ou élevées
NF EN 12830:2018 Enregistreurs de température pour le transport, le stockage et la distribution des marchandises thermosensibles - Essais, performance, aptitude à l'emploi
NF X35-201:1994 Hot environments. Estimation of the heat stress on working man, based on the wbgt-index (wet bulb globe temperature).
NF C57-104*NF EN IEC 60891:2021 Photovoltaic devices - Procedures for temperature and irradiance corrections to measured I-V characteristics
XP S31-018-1*XP ISO/TS 13471-1:2017 Acoustics - Temperature influence on tyre/road noise measurement - Part 1 : correction for temperature when testing with the CPX method
NF EN 13486:2002 Enregistreurs de température et thermomètres pour le transport, l'entreposage et la distribution des denrées alimentaires réfrigérées, congelées et surgelées et des crèmes glacées - Vérification périodique
NF S93-302:1996 Haemodialysers, haemodiafilters, haemofilters, haemoconcentrators and their extracorporeal circuits.
NF A33-111*NF EN 10267:1998 Ferritic-pealitic steels for precipitation hardening from hot-working temperatures.
NF E18-151*NF EN 13486:2002 Temperature recorders and thermometers for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream - Periodic verification.
NF EN ISO 3146:2022 Plastiques - Détermination du comportement à la fusion (température de fusion ou plage de températures de fusion) des polymères semi-cristallins par méthodes du tube capillaire et du microscope polarisant
NF T51-071-2*NF EN ISO 4589-2:2017 Plastics - Determination of burning behaviour by oxygen index - Part 2 : ambient-temperature test
NF E35-455-1*NF EN 17066-1:2019 Insulated means of transport for temperature sensitive goods - Requirements and testing - Part 1 : container
NF EN ISO 2884-2:2006 Peintures et vernis - Détermination de la viscosité au moyen de viscosimètres rotatifs - Partie 2 : viscosimètre à disque ou à bille fonctionnant à vitesse spécifiée
NF E18-017*NF EN 13485:2002 Thermometers for measuring the air and product temperature for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream - Tests, performance, suitability.
NF EN 13485:2002 Thermomètres pour le mesurage de la température de l'air et des produits pour le transport, l'entreposage et la distribution de denrées alimentaires réfrigérées, congelées, surgelées et des crèmes glacées - Essais, performance, aptitude à ...
NF E51-101-4*NF EN ISO 12759-4:2019 Fans - Efficiency classification for fans - Part 4 : driven fans at maximum operating speed
NF EN ISO 12759-4:2019 Ventilateurs - Classification du rendement des ventilateurs - Partie 4 : ventilateurs entraînés à vitesse maximale de fonctionnement
NF EN 17066-1:2019 Moyen de transport isotherme pour les marchandises sensibles à la température - Exigences et essais - Partie 1 : cellule isotherme
FD X43-070-3:2008 Air quality - Practical guidance for estimating the uncertainty of measurement on polluant concentration in ambient air - Part 3 : Estimation of the uncertainties on measurements of benzene conducted in situ by diffusion tube followed by a thermal desorpt
NF EN ISO 4589-2:2017 Plastiques - Détermination du comportement au feu au moyen de l'indice d'oxygène - Partie 2 : essai à la température ambiante

European Committee for Standardization (CEN), after operating temperature

EN ISO 2578:1998 Plastics - Determination of Time-Temperature Limits After Prolonged Exposure to Heat
EN 12830:2018 Temperature recorders for the transport@ storage and distribution of temperature sensitive goods - Tests@ performance@ suitability
EN 993-10:1997 Methods of Test for Dense Shaped Refractory Products - Part 10: Determination of Permanent Change in Dimensions on Heating
EN 2997-002:2016 Aerospace series - Connectors@ electrical@ circular@ coupled by threaded ring@ fire-resistant or non fire-resistant@ operating temperatures - 65 ��to 175 ��continuous@ 200 ��continuous@ 260 ��peak - Part 002: Specification of performance and contact arran
EN 4165-024:2011 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 024: Single module plug - Product standard
EN 4165-024:2017 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 024: Single module plug - Product standard
EN 1704:1997 Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after temperature cycling under bending
EN 13486:2001 Temperature recorders and thermometers for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream - Periodic verification
CEN/TR 15404:2010 Solid recovered fuels - Methods for the determination of ash melting behaviour by using characteristic temperatures
EN 2997-005:2016 Aerospace series - Connectors@ electrical@ circular@ coupled by threaded ring@ fire-resistant or non fire-resistant@ operating temperatures - 65 ��to 175 ��continuous@ 200 ��continuous@ 260 ��peak - Part 005: Hermetic square flange receptacle - Product st
EN ISO 12759-4:2019 Fans - Efficiency classification for fans - Part 4: Driven fans at maximum operating speed (ISO 12759-4:2019)
EN 13485:2001 Thermometers for Measuring the Air and Product Temperature for the Transport, Storage and Distribution of Chilled, Frozen, Deep-Frozen/Quick-Frozen Food and Ice Cream - Tests, Performance, Suitability
EN 2997-007:2016 Aerospace series - Connectors@ electrical@ circular@ coupled by threaded ring@ fire-resistant or non fire-resistant@ operating temperatures - 65 ��to 175 ��continuous@ 200 ��continuous@ 260 ��peak - Part 007: Hermetic receptacle with round flange attached

Japanese Industrial Standards Committee (JISC), after operating temperature

JIS K 7226:1998 Plastics -- Determination of time-temperature limits after prolonged exposure to heat
JIS C 60891:2019 Photovoltaic devices -- Procedures for temperature and irradiance corrections to measured I-V characteristics
JIS W 0814:2002 Aircraft equipment -- Environmental and operating conditions for airborne equipment -- Humidity, temperature and pressure tests
JIS K 7201-2:2021 Plastics -- Determination of burning behaviour by oxygen index -- Part 2: Ambient-temperature test
JIS R 1802:2005 Methods for surface temperature measurement of far infrared heaters by thermocouples

Society of Automotive Engineers (SAE), after operating temperature

SAE ARP5623-2013 Mobile Digital Infrared Pavement Surface, Ambient Air and Dew Point Temperature Sensor System
SAE AS413B-1969 Temperature Instruments (Reciprocating Engine Powered Aircraft)
SAE AS580-1963 PILOT VISIBILITY FROM THE FLIGHT DECK REQUIREMENTS FOR COMMERCIAL TRANSPORT AIRCRAFT
SAE AMS3684B-1993 (Noncurrent)Resin, Polyimide, Sealing High-Temperature Resistant, 315 Degrees C (600 Degrees F) Unfilled
SAE AIR847A-2016 Oxygen Equipment for Commercial Transport Aircraft Which Fly Above 45,000 Ft
SAE AIR847-1991 OXYGEN EQUIPMENT FOR COMMERCIAL TRANSPORT AIRCRAFT WHICH FLY ABOVE 45, 000 FT

United States Navy, after operating temperature

NAVY MIL-T-7748 E NOTICE 1-1999 TRANSMITTER, PRESSURE, SYNCHRO, AIRCRAFT 320 DEGREE MOVEMENT, HIGH TEMPERATURE (177 DEGREE C) GENERAL PURPOSE
NAVY MIL-T-7748 E (2)-1978 TRANSMITTER, PRESSURE, SYNCHRO, AIRCRAFT 320 DEGREE MOVEMENT, HIGH TEMPERATURE (177 DEGREE C) GENERAL PURPOSE
NAVY MIL-T-7748 E-1972 TRANSMITTER, PRESSURE, SYNCHRO, AIRCRAFT 320 DEGREE MOVEMENT, HIGH TEMPERATURE (177 DEGREE C) GENERAL PURPOSE

TIA - Telecommunications Industry Association, after operating temperature

TIA-569-C-1-2013 Telecommunications Pathways and Spaces Addendum 1- Revised Temperature and Humidity Requirements for Telecommunications Spaces

Lithuanian Standards Office , after operating temperature

LST EN 61868-2001 Mineral insulating oils. Determination of kinematic viscosity at very low temperatures (IEC 61868:1998)
LST EN ISO 2578:2002 Plastics - Determination of time-temperature limits after prolonged exposure to heat (ISO 2578:1993)
LST EN 13486-2002 Temperature recorders and thermometers for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream - Periodic verification
LST EN 1704-2002 Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after temperature cycling under bending
LST EN 13485-2002 Thermometers for measuring the air and product temperature for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream - Tests, performance, suitability

European Committee for Electrotechnical Standardization（CENELEC）, after operating temperature

EN 61868:1999 Mineral insulating oils Determination of kinematic viscosity at very low temperatures
EN 60891:2010 Photovoltaic devices - Procedures for temperature and irradiance corrections to measured I-V characteristics

Natural Gas Processor's Association (NGPA), after operating temperature

GPA RR-47-1981 Behavior of CH4-CO2-H2S Mixtures at Sub-Ambient Temperatures

American National Standards Institute （ANSI), after operating temperature

ANSI/IEEE 1283:2004 Guide for Determining the Effects of High Temperature Operation on Conductors, Connectors, and Accessories

Standard Association of Australia （SAA）, after operating temperature

AS/NZS 4266.10:2004 Reconstituted wood-based panels - Methods of test - Wet bending strength after immersion in water at 70oC or boiling temperature
ENA NENS 07-2006 National guidelines for manual reclosing of high voltage electrical apparatus following a fault operation (Manual Reclose Guidelines)
AS 4032.2:2005/AMD 2:2009 Amendment No. 2 to AS 4032.2—2005 Water supply—Valves for the control of hot water supply temperatures Part 2: Tempering valves and end-of-line temperature-actuated devices
AS 4032.2:2005 Water supply - Valves for the control of hot water supply temperatures - Tempering valves and end-of-line temperature-actuated devices

交通运输部, after operating temperature

JT/T 1325-2020 Technical requirements and inspection methods for driving temperature recorders

Henan Provincial Standard of the People's Republic of China, after operating temperature

DB41/T 1720-2018 Information system operation and maintenance service cost measurement specification

Professional Standard - Public Safety Standards, after operating temperature

GA/T 1391-2017 Calculation method of average running speed of urban road vehicles

IECQ - IEC: Quality Assessment System for Electronic Components, after operating temperature

PQC 72-1987 Radio Frequency Cables for Use in Electrotechnical Equipment: Sectional Specification: Radio Frequency Cables@ Flexible@ for Operation at a Maximum Center Conductor Temperature of 85 Degrees C
PQC 74/ US 0001-1988 Radio Frequency Cables for Use in Electrotechnical Equipment: Detail Specification: Radio Frequency Cables@ Flexible@ for Operation at a Maximum Center Conductor Temperature of 85 Degrees C Assessment Level U
PQC 73/ US 0001-1988 Radio Frequency Cables for Use in Electrotechnical Equipment: Detail Specification: Radio Frequency Cables@ Flexible@ for Operation at a Maximum Center Conductor Temperature of 85 Degrees C Assessment Level H
PQC 73-1987 Radio Frequency Cables for Use in Electrotechnical Equipment: Blank Detail Specification: Flexible Radio Frequency Cables for Operation at a Maximum Center Conductor Temperature of 85 Degrees C Assessment Level H

Military Standards (MIL-STD), after operating temperature

DOD PPP-C-1266 B REINST NOTICE 2-1992 CONTAINER, THERMAL, SHIPPING, FOR MEDICAL MATERIAL REQUIRING CONTROLLED TEMPERATURE RANGES
DOD PPP-C-1266 B-1969 CONTAINER, THERMAL, SHIPPING, FOR MEDICAL MATERIAL REQUIRING CONTROLLED TEMPERATURE RANGES

Fujian Provincial Standard of the People's Republic of China, after operating temperature

DB35/T 1805-2018 Food cold chain logistics storage, transportation, sales temperature control requirements

Professional Standard - Machinery, after operating temperature

JB/T 9444.11-1999 Basic environmental testing method of copying machines - Test H: Temperature/humidity operation test
JB/T 6213.2-2006 Flexiuie cables and cords for winding leads of electric motors Part 2: Flexible cables and cords with maximum continuous operating temperature of 70℃
JB/T 6213.3-2006 Flexiuie cables and cords for winding leads of electric motors Part 3: Flexible cables and cords with maximum continuous operating temperature of 90℃
JB/T 6213.4-2006 Flexiuie cables and cords for winding leads of electric motors Part 4: Flexible cables and cords with maximum continuous operating temperature of 180℃
JB/T 6213.2-1992 Flexible cables and cords for electrical machine winding connections Part 2: Flexible cables and cords with a maximum conductor temperature of 70°C for continuous operation
JB/T 6213.3-1992 Flexible cables and cords for electrical machine winding connections Part 3: Flexible cables and cords with a maximum conductor temperature of 90°C for continuous operation
JB/T 6213.4-1992 Flexible cables and cords for motor winding connections - Part 4: Flexible cables and cords with a maximum conductor temperature of 180°C for continuous operation
JB/T 6213.6-2006 Flexiuie cables and cords for winding leads of electric motors Part 6: Flexible cables and cords with maximum continuous operating temperature of 125℃ & 150℃

Professional Standard - Electron, after operating temperature

SJ 911-1974 Detail specification for silicon planar temperature compensation voltage regulator diodes,Type 2DW230~236

国家市场监督管理总局、中国国家标准化管理委员会, after operating temperature

GB/T 40604-2021 Information exchange technical requirements for energy dispatch and operation of renewable energy station
GB/T 13477.12-2018 Test method for building sealants－Part 12：Determination of adhesion/cohesion properties at constant temperature
GB/T 24959-2019 Refrigerated light hydrocarbon fluids—General requirements for temperature measurement system in cargo tanks of LNG carrier

机械工业部, after operating temperature

JB 6213.4-1992 Flexible cables and cords leading to motor windings Part 4 Flexible cables and cords with a maximum conductor temperature of 180°C for continuous operation
JB 6213.2-1992 Flexible cables and cords leading to motor windings Part 2 Flexible cables and cords with a maximum conductor temperature of 70°C for continuous operation
JB 6213.3-1992 Flexible cables and cords leading to motor windings Part 3 Flexible cables and cords with a maximum conductor temperature of 90°C for continuous operation

RO-ASRO, after operating temperature

STAS 6679/12-1985 Metal cutting machine-tools COMPLEX CHECKING METHODS OF THE STRAIGHTNESS AND PERPENDICULAR ALIGNEMENT OF A WORKING ELEMENT MOVTNG DIRECTION AGAINST A PLANE OR AN AXIS
STAS 145/26-1978 VEGETABLE OILS AND FATS Behaviour determination of technical oils at polymerization temperature
STAS 6926/20-1988 Road vehicles IMPACT STRENGTH DETER- M1NATION AT LOW SPEED. FOR PASSENGER CARS Test methods
STAS 6587-1979 THREPHASE ASYNCHRONOUS MOTORS FROM 132 kW TO 2000 kW Rated powers, voltages and speeds
STAS 6679/5-1985 Metal cutting mncline-tools METHODE DE simuiLtanEous CHE-CKING STHHIGHTNESS AND PAHALLELISM OF THE MOY1NG BODY DIREC.TION OF MOVEMENT TO A l'l.ANIi OH AN AXIS

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., after operating temperature

ASHRAE 3934-1996 Ambient Temperature and Solar Radiation Prediction for Predictive Control of HVAC Systems and a Methodology for Optimal Building Heating Dynamic Operation
ASHRAE LV-11-C022-2011 Experimental Investigation of a Machine Tool Cooler Using Hot-Gas By-Pass Valves for Temperature Control

Society of Motion Picture and Television Engineers (SMPTE), after operating temperature

SMPTE ST 200M-2003 Motion-Picture Film (8-mm Type S) - Model 1 Sound Camera Cartridge - Camera Run Length, Perforation Cutout and End-Of-Run Notch
SMPTE 200M-2003 Motion-Picture Film (8-mm Type S) - Model 1 Sound Camera Cartridge - Camera Run Length, Perforation Cutout and End-Of-Run Notch

Professional Standard - Traffic, after operating temperature

JTS 202-1-2010 Technical Specification for Thermal Cracking Control of Mass Concrete of Port and Waterway Engineering
JT/T 27.5-1993 Technical grade standard for workers in the transportation industry Highway transportation and road maintenance Automobile passenger dispatcher
JT/T 27.13-1993 Technical grade standard for workers in the transportation industry Road transport and road maintenance Auto freight station dispatcher

ES-UNE, after operating temperature

UNE-EN IEC 60891:2022 Photovoltaic devices - Procedures for temperature and irradiance corrections to measured I-V characteristics
UNE-CEN/TR 15762:2008 Road transport and traffic telematics - Electronic fee collection (EFC) - Ensuring the correct function of EFC equipment installed behind metallised windshield (Endorsed by AENOR in January of 2014.)
UNE-EN 17066-1:2021 Insulated means of transport for temperature sensitive goods - Requirements and testing - Part 1: Container
UNE-EN ISO 12759-4:2021 Fans - Efficiency classification for fans - Part 4: Driven fans at maximum operating speed (ISO 12759-4:2019)

IT-UNI, after operating temperature

ANCC M.14.1-1973

National Aeronautics and Space Administration (NASA), after operating temperature

NASA-TP-1419-1979 Low-speed wind-tunnel parametric investigation of flight spoilers as trailing-vortex-alleviation devices on a transport aircraft model
NASA-TN-D-36-1959 Analysis of acceleration, airspeed and gust-velocity data from a four-engine turboprop transport operating over the eastern United States

American Society of Mechanical Engineers (ASME), after operating temperature

ASME PTC 6R-1985 Guidance for Evaluation of Measurement Uncertainty in Performance Tests of Steam Turbines

CN-STDBOOK, after operating temperature

图书 3-8967 Research report on the actual operation status of China's refrigeration and air conditioning (2018)

Guangxi Provincial Standard of the People's Republic of China, after operating temperature

DB45/T 1400-2016 Technical specification for temperature and humidity monitoring performance verification of food and drug storage and transportation environment

Hunan Provincial Standard of the People's Republic of China, after operating temperature

DB43/T 2148-2021 Temperature and humidity requirements and testing methods for food cold chain logistics storage and transportation

US-CFR-file, after operating temperature

CFR 46-14.301-2013 Shipping. Part14:Shipment and discharge of merchant mariners. Section14.301:Paying off of merchant mariner during or after voyage upon which shipping articles are required.
CFR 14-91.883-2013 Aeronautics and space. Part91:General operating and flight rules. Section91.883:Special flight authorizations for jet airplanes weighing 75,000 pounds or less.
CFR 46-154.1715-2014 Shipping.PART 154:Safety standards for self-propelled vessels carrying bulk liquefied gases. Section154.1715:Moisture control.
CFR 12-701.21-2014 Banks and banking. Part701:Organization and operation of federal credit unions. Section701.21:Loans to members and lines of credit to members.
CFR 14-91.881-2013 Aeronautics and space. Part91:General operating and flight rules. Section91.881:Final compliance: civil subsonic jet airplanes weighing 75,000 pounds or less.

SAE - SAE International, after operating temperature

SAE AS580A-1968 PILOT VISIBILITY FROM THE FLIGHT DECK DESIGN OBJECTIVES FOR COMMERCIAL TRANSPORT AIRCRAFT
SAE AIR847-1965 Oxygen Equipment for Commercial Transport Aircraft Which Fly Above 45@000 ft
SAE AIR847A-2000 Oxygen Equipment for Commercial Transport Aircraft Which Fly Above 45@000 ft

National Electrical Manufacturers Association（NEMA), after operating temperature

NEMA NTCIP 1404-2000 Standard on Scheduling/Runcutting (SCH) Objects Joint Standard of AASHTO, ITE and Nema

Taiwan Provincial Standard of the People's Republic of China, after operating temperature

CNS 10699-1994 Method of Test for Land Mobile Communication FM or PM Receiver, 25-947MH`7|(Audio Sensitivity, Temperature and High Humidity)

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., after operating temperature

IEEE C57.154-2012 The Design@ Testing@ and Application of Liquid-Immersed Distribution@ Power@ and Regulating Transformers Using High-Temperature Insulation Systems and Operating at Elevated Temperatures

European Association of Aerospace Industries, after operating temperature

AECMA PREN 3733-001-1995 Aerospace Series Circular Optical Connector, Single Channel, Coupled by Self-Locking Ring Operating Temperatures 150 Degrees Celsius Continuous 200 Degrees Celsius Continuous, 260 Degrees Celsius Peak and Fire Resistant Part 001: Technical Specification

Professional Standard - Post and Telecommunication, after operating temperature

YD 5057-1998 Interim regulations on engineering design of computer network system for postal transportation dispatching in the province

IN-BIS, after operating temperature

IS 12763-1989

American Association, after operating temperature

ASSE 1062-2006 Performance Requirements for Temperature Actuated, Flow Reduction (TAFR) Valves for Individual Supply Fittings

U.S. Military Regulations and Norms, after operating temperature

ARMY MIL-D-70487 NOTICE 1-2013 Detector, Wind Direction, Speed, and Temperature, Fire and Flight Air Data Subsystem, Helicopter Armament: M143
ARMY MIL-D-70487 (1)-1990 DETECTOR, WIND DIRECTION, SPEED, AND TEMPERATURE, FIRE AND FLIGHT AIR DATA SUBSYSTEM, HELICOPTER ARMAMENT: M143
ARMY MIL-D-70487-1983 DETECTOR, WIND DIRECTION, SPEED, AND TEMPERATURE, FIRE AND FLIGHT AIR DATA SUBSYSTEM, HELICOPTER ARMAMENT: M143

CENELEC - European Committee for Electrotechnical Standardization, after operating temperature

EN 60891:1994 Procedures for Temperature and Irradiance Corrections to Measured I- V Characteristics of Crystalline Silicon Photovoltaic Devices

CEN - European Committee for Standardization, after operating temperature

PREN 17066-1-2016 Insulated means of transport for temperature sensitive goods - Requirements and testing - Part 1: Container
PD CEN/TS 15404:2006 Solid recovered fuels - Methods for the determination of ash melting behaviour by using characteristic temperatures

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, after operating temperature

ITU-R S.524-6-2000 Maximum Permissible Levels of Off-Axis e.i.r.p. Density from Earth Stations in GSO Networks Operating in the Fixed-Satellite Service Transmitting in the 6GHz@ 14 GHz and 30 GHz Frequency Bands

AT-ON, after operating temperature

ONORM S 9030-1996 Evaluation Standards for mechanical vibrations of machines with operating speeds from 600 min-1 to 12 000 min1

American Nuclear Society (ANS), after operating temperature

ANS 58.8-1994 Time Response Design Criteria for Safety-Related Operator Actions

GM North America, after operating temperature

GM GM9623P-1992 Flocked Fabric Bond to Door Glass Run Channels/Stabilizer Peel Strength Procedure

BE-NBN, after operating temperature

NBN-EN 22313-1992 Textile fabrics. Determination of the recovery from creasing of a horizontally folded specimen by measuring the angle of recovery (ISO 2313:1972)

PT-IPQ, after operating temperature

NP 3291-1986

International Telecommunication Union (ITU), after operating temperature

ITU-T T.45 SPANISH-2000 Run-length colour encoding