ZH
RU
ES

Three times the detection line

Three times the detection line, Total:435 items.

In the international standard classification, Three times the detection line involves: Laboratory medicine, Galvanic cells and batteries, Non-destructive testing, Acoustics and acoustic measurements, Aircraft and space vehicles in general, Crude petroleum, Petroleum products in general, Testing of metals, Linear and angular measurements, Manufacturing forming processes, Optics and optical measurements, Protection of and in buildings, Animal feeding stuffs, Welding, brazing and soldering, Optoelectronics. Laser equipment, Industrial furnaces, Pipeline components and pipelines, Iron and steel products, Radiation protection, Radiation measurements, Rubber, Capacitors, Fruits. Vegetables, Radiocommunications, Paper and board, Paper products, Food products in general, Quality, Metrology and measurement in general, Electronic components in general, Products of the chemical industry, Electricity. Magnetism. Electrical and magnetic measurements, Special measuring equipment for use in telecommunications, Vocabularies, General methods of tests and analysis for food products, Electrical equipment for working in special conditions, Electrical wires and cables, Products of the textile industry, Textile fibres, Protection against crime, Glass, Farming and forestry, Medical equipment, Wastes, Products of non-ferrous metals, Machine tools, Nuclear energy engineering.

国家药监局, Three times the detection line

YY/T 1801-2021 Fetal chromosomal aneuploidy trisomy 21, trisomy 18 and trisomy 13 detection kit (high-throughput sequencing method)

Professional Standard - Commodity Inspection, Three times the detection line

SN/T 0486.1-1995 Methods for inspection of vermiculite for export.Method for inspection of multiple linear expansion--Direct measurement method1995-09-06
SN/T 1990-2007 Determination of azocyclotin and cyhexatin residues in food for import and export.GC-MS method
SN/T 2933-2011 Methods for the detection of chloroform, benzene, carbon tetrachloride, chloropicrin, nitrobenzene and dichlorotoluene in cosmetics
SN/T 3012-2011 Determination of tungsten trioxide in tungsten ores.X-ray fluorescence spectrometry
SN/T 2232-2008 Determination of triadimenol residue in foods for import and export.GC-MS method
SN/T 2147-2008 Determination of cadusafos residues in food for import and export

Standard Association of Australia （SAA）, Three times the detection line

AS 5013.9:2009 Food microbiology Method 9: Examination for specific organisms— Coliforms and Escherichia coli by the triplicate tube detection method
AS 2177:2006/Amdt 1:2014

Group Standards of the People's Republic of China, Three times the detection line

T/CI 035-2022 Calibration method of magnification of X-ray detection equipment for lithium ion battery
T/CAMMT 43-2022 Detection method for gap and flush of aircraft skin seam based on 3D line lase
T/SXHK 003-2019 Quality inspection requirements for product design models and 3D drawings
T/SQIA 005-2022 Rapid detection of triadimefon residues in vegetables and fruits — colloidal gold immunochromatography
T/SHSOT 011-2023 Determination of hydroxypropyl Tetrahydropyrantriol in cosmetics—Liquid chromatography
T/CMTBA 1002.1-2019 Heavy duty machine tools—Tests— Part 1: Straightness measuring method of guideway

VN-TCVN, Three times the detection line

TCVN 5879-2009 Non-destructive testing.Aids to visual inspection.Selection of low-power magnifiers

YU-JUS, Three times the detection line

JUS C.A7.092-1985 Non destructive testing. Aids to visual inspection. Selection of low-power magnifiers
JUS H.P8.048-1985 Testing ofpesticides. s-Triazines. Determination of total triazines content. Potentiometric method
JUS H.P8.093-1988 Testing of pesticides. Simazine, technical. Determination of total content of chloro triazines. Potentio- metric method
JUS H.P8.045-1985 Testing of pesticides. s-triazines. Determination ofactive ingradientcontent
JUS H.B8.446-1989 Trichlorethylene for industrial use, stabilized. Detection of free chlorine
JUS E.L8.006-1980 Determiriation ofethanol by enzymatic method (UV-test)
JUS E.L8.013-1980 Determination of starch by enzymatic method (UV -test)
JUS H.P8.049-1985 Testing of pesticides. s-Triazines. Determination ofchloride content. Potenciometrk method
JUS E.L8.010-1980 Determination ofmaltose by enzymatic method (UV-test)
JUS H.P8.094-1988 Testing ofpesticides. Simazine, technical. Determination of material soluble in n-hexane
JUS E.L8.008-1980 Determination of L-apple acid by enzymatic method (UV-test)
JUS H.P8.090-1988 Testing of pesticides. Atrazine, technical. Determ inati on of total content of chloro-triazines. Potentio- metric method
JUS E.L8.012-1980 Determination of D-sorbit by enzymatic method (UV-test)
JUS E.L8.007-1980 Determination ofglucose and fructose by enzymatic metho? (UV-test)
JUS E.L8.011-1980 Determination of sucrose andghicose by enzymatic method (UV-test)
JUS E.L8.009-1980 Determination oflactose andgalactose by enzymatic method (UV-test)
JUS H.P8.092-1988 Testing of pesticides. Simazine, technical. Determination of active ingradient content. Gas-liquid chro- atography
JUS F.S2.553/1-1990 Textile cord. Method of test of static a?hesion of textile cor? to rubber (K-test) . Amendments

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Three times the detection line

GB/T 20968-2007 Non-destructive testing.Aids to visual inspection.Selection of low-power magnifiers
GB/T 29576-2013(英文版) Detection and identification of Achatina fulica Bowdich
GB/T 23909.1-2009 Non-destructive testing.Radioscopic testing.Part 1:Quantitative measurement of imaging properties
GB/T 23909.2-2009 Non-destructive testing.Radioscopic testing.Part 2:Check of long term stability of imaging devices
GB/T 21355-2008 Non-destructive testing.Classification of computed radiology systems
GB/T 16857.3-2009 Geometrical Product Specifications(GPS).Acceptance and reverification tests for coordinate measuring machines(CMM).Part 3:CMMs with the axis of a rotary table as the fourth axis
GB 11299.13-1989 Satellite Communication Earth Station Radio Equipment Measurement Methods Part 3 Subsystem Combination Measurements Section 3 Frequency Division Multiplexed Transmission Measurements
GB/T 23901.1-2009 Non-destructive testing.Image quality of radiographs.Part 1:Image quality indicators (wire type).Determination of image quality value

Korean Agency for Technology and Standards (KATS), Three times the detection line

KS B ISO 3058-2001(2021) Non-destructive testing－Aids to visual inspection－Selection of low-power magnifiers
KS A 4606-1995 Industrial X-ray apparatus for radiographic testing
KS B 4302-2002(2007) Test code for performance and accuracy of wire electrical discharge machines
KS B 4302-1987 Test code for performance and accuracy of wire electrical discharge machines
KS A 4606-2005(2020) Industrial X-ray apparatus for radiographic testing
KS C IEC 61265-2017(2022) Electroacoustics — Instruments for measurement of aircraft noise — Performance requirements for systems to measure one-third-octave band sound pressure levels in noise certification of transport-categ
KS C IEC 61265:2017 Electroacoustics — Instruments for measurement of aircraft noise — Performance requirements for systems to measure one-third-octave band sound pressure levels in noise certification of transport-categ
KS W 0913-2014 Radiographic inspection for aerospace quality materials
KS D 0245-1992(2012) Method of radiographic testing for aluminium T-welds
KS D 0245-1982 Method of radiographic testing for aluminium T-welds
KS D ISO 12096-2002(2017) Submerged arc-welded steel tubes for pressure purposes－Radiographic testing of the weld seam for the detection of imperfections
KS D 0272-2021 Standard qualification procedure for radiographic testing technique of welds
KS B ISO 23159:2022 Non-destructive testing — Gamma ray scanning method on process columns
KS B 5530-2003(2018)
KS Q ISO 11843-5:2012 Capability of detection-Part 5:Methodology in the linear and non-linear calibration cases
KS Q ISO 11843-5:2018 Capability of detection — Part 5: Methodology in the linear and non-linear calibration cases
KS Q ISO 11843-5-2023 Detection Capabilities Part 5: Methodology in Linear and Nonlinear Calibration Vessels
KS B ISO 19232-1:2005 Non-destructive testing－Image quality of radiographs－Part 1：Image quality indicators(wire type)－Determination of image quality value

未注明发布机构, Three times the detection line

BS ISO 3058:1998(1999) Non - destructive testing — Aids to visual inspection — Selection of low - power magnifiers
BS EN ISO 17636-2 Non-destructive testing of welds. Radiological inspection. X-ray and gamma-ray technology with digital detectors
BS EN 61265:1995(2000) Electroacoustics — Instruments for measurement of aircraft noise — Performance requirements for systems to measure one - third - octave band sound pressure levels in noise certification of transport - category aircraft
NF A89-510-1*NF EN ISO 17636-1:2013 Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film
BS EN 444:1994(1999) Non - destructive testing — General principles for radiographic examination of metallic materials by X - and gamma - rays
BS EN 1330-3:1997(2007) Non - destructive testing — Terminology — Part 3 : Terms used in industrial radiographic testing
BS EN ISO 10675-2:2021(2022) Non - destructive testing of welds — Acceptance levels for radiographic testing Part 2 : Aluminium and its alloys
DIN EN 462-5:1996 Non-destructive testing – Image quality of radiographs DI Part 5: Image test body (double wire bar) Determination of image blur
DIN EN ISO 10675-1:2022 Non-destructive testing of welded joints – Admissibility limits for radiographic testing – Part 1: Steel, nickel, titanium and their alloys

Association Francaise de Normalisation, Three times the detection line

NF S31-140:1995 Electroacoustics. Instruments for measurement of aircraft noise. Performance requirements for systems to measure one-thirs-octave band sound pressure levels in noise certification of transport-category aeroplanes.
NF A04-114:1984 Iron and steel. High carbon continuous cast steel wire rod. Macrographic method of showing and describing the chemical heterogeneity.
NF A04-113:1984 Iron and steel. High carbon steel wire rod derived from ingots. Macrographic method of showing and describing the chemical heterogeneity.
NF A09-232*NF EN 12679:2018 Non-destructive testing - Radiographic testing - Determination of the size of industrial radiographic gamma sources
NF A09-254-2*NF EN ISO 20769-2:2018 Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 2 : double wall radiographic inspection
NF A09-254-1*NF EN ISO 20769-1:2018 Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 1 : tangential radiographic inspection
NF A09-283:2019 Non-destructive testing - Traceability and securing of radiographic testing
NF EN 12679:2018 Essais non destructifs - Contrôle radiographique - Détermination de la dimension des sources de radiographie industrielle gamma
NF EN 13100-2:2019 Essais non destructifs des assemblages soudés sur produits semi-finis en thermoplastiques - Partie 2 : contrôle radiographique par rayons X
NF EN ISO 10893-7:2019 Essais non destructifs des tubes en acier - Partie 7 : contrôle radiographique numérique du cordon de soudure des tubes en acier soudés pour la détection des imperfections
NF EN ISO 17636-2:2022 Essais non destructifs des assemblages soudés - Contrôle par radiographie - Partie 2 : Techniques par rayons X ou gamma à l'aide de détecteurs numériques
NF A89-511-2*NF EN ISO 10675-2:2021 Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 2 : aluminium and its alloys
NF EN ISO 10893-6:2019 Essais non destructifs des tubes en acier - Partie 6 : contrôle radiographique du cordon de soudure des tubes en acier soudés pour la détection des imperfections
NF EN ISO 17636-1:2022 Essais non destructifs des assemblages soudés - Contrôle par radiographie - Partie 1 : techniques par rayons X ou gamma à l'aide de film
NF C48-465:1993 Detection of intrusions. Wireless and non-specifically wired audible alarm devices
FD CEN/TR 15589:2014 Essais non destructifs - Code de pratique pour l'approbation du personnel chargé des END par des entités tierces parties reconnues en application des dispositions de la Directive 97/23/CE
NF EN 13068-3:2002 Essais non destructifs - Contrôle par radioscopie - Partie 3 : principes généraux de contrôle par radioscopie à l'aide de rayons X et gamma des matériaux métalliques
NF A89-511-1*NF EN ISO 10675-1:2021 Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 1 : steel, nickel, titanium and their alloys
NF EN ISO 20769-1:2018 Essais non destructifs - Examen radiographique de la corrosion et des dépôts dans les canalisations par rayons X et rayons gamma - Partie 1 : examen radiographique tangentiel
NF EN ISO 20769-2:2018 Essais non destructifs - Examen radiographique de la corrosion et des dépôts dans les canalisations par rayons X et rayons gamma - Partie 2 : examen radiographique double paroi
NF EN 12543-2:2021 Essais non destructifs - Caractéristiques des foyers émissifs des tubes radiogènes industriels utilisés dans les essais non destructifs - Partie 2 : méthode radiographique par sténopé
NF A09-232:1999 Non destructive testing - Determination of the size of industrial radiographic sources - Radiographic method.
XP T90-224:2013 Water Quality - Determination of Trihalomethanes in swimming pool water - Method using either static headspace or purge-and-trap with thermal desorption, on-line with gas chromatographic analysis with mass spectrometric detection
NF EN 12679:1999 Non destructive testing-Determination of the size of industrial radiographic sources - Radiographic method
NF EN 12543-3:1999 Essais non destructifs - Caractéristiques des foyers émissifs des tubes radiogènes industriels utilisés dans les essais non destructifs - Partie 3 : méthode radiographique par chambre à fente
NF X06-048-2*NF ISO 11843-2:2000 Capability of detection - Part 2 : methodology in the linear calibration case
NF A09-231-2*NF EN 12543-2:2021 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2 : pinhole camera radiographic method
NF A89-511-1:2013 Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 1: steel, nickel, titanium and their alloys
NF EN 12543-5:1999 Essais non destructifs - Caractéristiques des foyers émissifs des tubes radiogènes industriels utilisés dans les essais non destructifs - Partie 5 : mesure de la dimension du foyer émissif de tubes radiogènes à mini et microfoyer
NF X06-048-5*NF ISO 11843-5:2008 Capability of detection - Part 5 : methodology in the linear and non-linear calibration cases
NF A09-253-2*NF EN ISO 16371-2:2017 Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 2 : General principles for testing of metallic materials using X-rays and gamma rays

Japanese Industrial Standards Committee (JISC), Three times the detection line

JIS K 2258-2:2009 Crude petroleum and petroleum products -- Determination of vapour pressure -- Part 2: Triple expansion method
JIS Z 4324:2017 Installed area monitors for X and gamma rays
JIS G 0803:2021 Radiographic examination with film for the weld seam of welded steel tubes
JIS G 0804:2021 Digital radiographic examination for the weld seam of welded steel tubes
JIS Z 3110:2017 Non-destructive testing of welded joints -- Methods of radiographic testing for X- and gamma-ray techniques with digital detectors
JIS Z 3104:1995 Methods of radiographic examination for welded joints in steel
JIS Z 8462-2:2003 Capability of detection -- Part 2: Methodology in the linear calibration case

British Standards Institution (BSI), Three times the detection line

BS EN 61265:1995 Electroacoustics - Instruments for measurement of aircraft noise - Performance requirements for systems to measure one-third-octave band sound pressure levels in noise certification of transport-category aircraft
BS ISO 3058:1998 Non-destructive testing - Aids to visual inspection - Selection of low-power magnifiers
BS EN ISO 17636-1:2013 Non-destructive testing of welds. Radiographic testing. X- and gamma-ray techniques with film
BS EN ISO 17636-2:2013 Non-destructive testing of welds. Radiographic testing. X- and gamma-ray techniques with digital detectors
BS 9690-2:2011 Non-destructive testing. Guided wave testing. Basic requirements for guided wave testing of pipes, pipelines and structural tubulars
BS EN ISO 10893-6:2019 Tracked Changes. Non-destructive testing of steel tubes. Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections
BS EN ISO 10893-7:2019 Tracked Changes. Non-destructive testing of steel tubes. Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections
PD 6528-1990 Method for verifying accuracy of tan delta measurements applicable to capacitors
BS EN 13068-1:2000 Non-destructive testing - Radioscopic testing - Quantitative measurement of imaging properties
BS EN ISO 10675-2:2017 Non-destructive testing of welds. Acceptance levels for radiographic testing. Aluminium and its alloys
BS EN ISO 10675-2:2013 Non-destructive testing of welds. Acceptance levels for radiographic testing. Aluminium and its alloys
BS EN ISO 17636-2:2022 Non-destructive testing of welds. Radiographic testing - X- and gamma-ray techniques with digital detectors
BS ISO 11843-5:2008+A1:2017 Capability of detection - Methodology in the linear and non-linear calibration cases
BS PD CEN/TR 15589:2014 Non destructive testing. Code of practice for the approval of NDT personnel by recognised third party organisations under the provisions of Directive 97/23/EC
BS ISO 11843-5:2009 Capability of detection. Methodology in the linear and non-linear calibration cases
BS ISO 11843-5:2008 Capability of detection - Methodology in the linear and non-linear calibration cases
BS EN ISO 17636-1:2022 Tracked Changes. Non-destructive testing of welds. Radiographic testing. X- and gamma-ray techniques with film
BS EN 62220-1-2:2007 Medical electrical equipment - Characteristics of digital X-ray imaging devices - Determination of the detective quantum efficiency - Detectors used in mammography
BS EN 17263:2019 Copper and copper alloys. Eddy current testing on the outer surface of rods, bars, hollow rods and wires for the detection of defects by encircling test coil
BS EN ISO 19232-1:2013 Non-destructive testing. Image quality of radiographs. Determination of the image quality value using wire-type image quality indicators
BS EN ISO 10675-1:2016 Non-destructive testing of welds. Acceptance levels for radiographic testing. Steel, nickel, titanium and their alloys
BS EN ISO 10675-1:2013 Non-destructive testing of welds. Acceptance levels for radiographic testing. Steel, nickel, titanium and their alloys
BS EN ISO 20769-1:2018 Non-destructive testing. Radiographic inspection of corrosion and deposits in pipes by X - and gamma rays - Tangential radiographic inspection
BS EN ISO 20769-2:2018 Non-destructive testing. Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Double wall radiographic inspection
21/30395174 DC BS EN ISO 17636-2. Non-destructive testing of welds. Radiographic testing. Part 2. X- and gamma-ray techniques with digital detectors

TR-TSE, Three times the detection line

TS 2399-1976 NON - DESTRUCTIVE TESTING - A?DS TO VISUAL INSPECTION - SEUECTION OF LOW - POWER MAGNIFIERS

BE-NBN, Three times the detection line

NBN-EN 462-1-1994 Non-destructive testing - Image quality of radiographs - Part 1 : Image quality indicators (wire type) - Determination of image quality value
NBN-EN 444-1994 Non-destructive testing - General principles for radiographic examination of metallic materials by X- and gamma-rays
NBN S 21-107-1988 Components ol automatic fire detection Systems Part 7 : Point type smoke detectors - Detectors using scattered light, transmitted light or ionization

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Three times the detection line

GB/T 34874.3-2017 Geometrical product specifications (GPS)—X-ray three dimensional size measuring machines—Part 3：Acceptance and reverification tests
GB/T 34890-2017 Geometrical product specification（GPS）—Acceptance and reverification tests for digital photogrammetry 3D coordinate measuring system
GB/T 16857.2-2017 Geometrical product specifications (GPS)—Acceptance and reverification tests for coordinate measuring machines (CMM)—Part 2: CMMs used for measuring linear dimensions

U.S. Military Regulations and Norms, Three times the detection line

ARMY MIL-HDBK-204 A-1990 DESIGN OF INSPECTION EQUIPMENT FOR DIMENSIONAL CHARACTERISTICS
ARMY MIL-HDBK-733 VALID NOTICE 1-1992 NONDESTRUCTIVE TESTING METHODS OF COMPOSITE MATERIALS - RADIOGRAPHY
ARMY MIL-HDBK-733-1986 NONDESTRUCTIVE TESTING METHODS OF COMPOSITE MATERIALS - RADIOGRAPHY

German Institute for Standardization, Three times the detection line

DIN EN 1330-3:1997-10 Non-destructive testing - Terminology - Part 3: Terms used in industrial radiographic testing; Trilingual version EN 1330-3:1997
DIN EN 13068-3:2001-12 Non-destructive testing - Radioscopic testing - Part 3: General principles for the radioscopic testing of metallic materials by X- and gamma rays; German version EN 13068-3:2001
DIN EN ISO 17636-2:2023-05 Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-ray techniques with digital detectors (ISO 17636-2:2022, Corrected version 2023-02); German version EN ISO 17636-2:2022
DIN EN 12679:2018 Non-destructive testing - Radiographic testing - Determination of the size of industrial radiographic gamma sources; German version EN 12679:2018
DIN EN ISO 10893-6:2019-06 Non-destructive testing of steel tubes - Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-6:2019); German version EN ISO 10893-6:2019
DIN EN 13068-1:2000-02 Non-destructive testing - Radioscopic testing - Part 1: Quantitative measurement of imaging properties; German version EN 13068-1:1999
DIN EN 1330-10:2003-05 Non-destructive testing - Terminology - Part 10: Terms used in visual testing; Trilingual version EN 1330-10:2003
DIN EN ISO 10893-7:2019-06 Non-destructive testing of steel tubes - Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-7:2019); German version EN ISO 10893-7:2019
DIN EN 17263:2019 Copper and copper alloys - Eddy current testing on the outer surface of rods, bars, hollow rods and wires for the detection of defects by encircling test coil
DIN EN 13100-2:2019 Non-destructive testing of welded joints in thermoplastics semi-finished products - Part 2: X-ray radiographic testing
DIN EN 13100-2:2019-11 Non-destructive testing of welded joints in thermoplastics semi-finished products - Part 2: X-ray radiographic testing; German version EN 13100-2:2019
DIN ISO 11093-6:2005 Paper and board - Testing of cores - Part 6: Determination of bending strength by the three-point method (ISO 11093-6:2005)
DIN EN 12679:2018-12 Non-destructive testing - Radiographic testing - Determination of the size of industrial radiographic gamma sources; German version EN 12679:2018
DIN EN 61265:1999 Electroacoustics - Instruments for measurement of aircraft noise - Performance requirements for systems to measure one-third-octave band sound pressure levels in noise certification of transport-category aeroplanes (IEC 61265:1995); German version EN 6126
DIN EN ISO 10893-7:2019 Non-destructive testing of steel tubes - Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-7:2019)
DIN VDE 0472-705:1987 Testing of cables, wires and flexible cords; indirect carbon black determination for PVC-sheaths
DIN EN ISO 20769-2:2018-12 Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 2: Double wall radiographic inspection (ISO 20769-2:2018); German version EN ISO 20769-2:2018
DIN EN ISO 20769-1:2018-12 Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 1: Tangential radiographic inspection (ISO 20769-1:2018); German version EN ISO 20769-1:2018
DIN ISO 11843-2:2006 Capability of detection - Part 2: Methodology in the linear calibration case (ISO 11843-2:2000; text in German, English)
DIN 53829-1:1990 Testing of textiles; determination of the evenness of yarns; testing of the force and extension on a moving test pieces, principles
DIN 54282:1971 Testing of textiles; determination of content of acetic acid of acetate or triacetate fibres
DIN EN 12543-2:2019 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method; German and English version prEN 12543-2:2019
DIN EN ISO 10675-2:2022-05 Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 2: Aluminium and its alloys (ISO 10675-2:2021, Corrected version 2022-02); German version EN ISO 10675-2:2021
DIN EN ISO 17636-2:2013 Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-ray techniques with digital detectors (ISO 17636-2:2013); German version EN ISO 17636-2:2013
DIN EN ISO 10675-2:2018 Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 2: Aluminium and its alloys (ISO 10675-2:2017)
DIN 52340-5:1993 Testing of glass; chemical analysis of colourless soda-lime-glass; determination of Al<(Index)2>O<(Index)3>
DIN EN 12543-3:1999 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 3: Slit camera radiographic method; German version EN 12543-3:1999
DIN ISO 11843-5:2010-08 Capability of detection - Part 5: Methodology in the linear and non-linear calibration cases (ISO 11843-5:2008); Text in German and English
DIN 53866-4:1979 Testing of textiles; shrinkage of single and plied yarns, determination of shrinkage in steam
DIN ISO 11264:2005-11 Soil quality - Determination of herbicides - Method using HPLC with UV-detection (ISO 11264:2005)
DIN EN 12543-1:1999 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 1: Scanning method; German version EN 12543-1:1999
DIN EN 12679:1999 Non-destructive testing - Determination of the size of industrial radiographic sources - Radiographic method; German version EN 12679:1999
DIN EN ISO 16526-2:2020-09 Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 2: Constancy check by the thick filter method (ISO 16526-2:2011); German version EN ISO 16526-2:2020
DIN 25429:2012 Test method for hot cell shielding with gamma point sources
DIN 53830-3:1981 Testing of textiles; determination of linear density of single and plied yarns; simple yarns and plied yarns, textured yarns, short length method

API - American Petroleum Institute, Three times the detection line

API RP 5B1-1988 Recommended Practice for Gaging and Inspection of Casing@ Tubing@ and Line Pipe Threads Third Edition
API STD 5B-1988 Specification for Threading@ Gaging@ and Thread Inspection of Casing@ Tubing@ and Line Pipe Threads (THIRTEENTH EDITION)

VE-FONDONORMA, Three times the detection line

NORVEN 75-5-1966

American Society for Testing and Materials (ASTM), Three times the detection line

ASTM E520-98 Standard Practice for Describing Photomultiplier Detectors in Emission and Absorption Spectrometry
ASTM E520-98(2003) Standard Practice for Describing Photomultiplier Detectors in Emission and Absorption Spectrometry
ASTM E1573-18 Standard Test Method for Measurement and Reporting of Masking Sound Levels Using A-Weighted and One-Third-Octave-Band Sound Pressure Levels
ASTM E1573-22 Standard Test Method for Measurement and Reporting of Masking Sound Levels Using A-Weighted and One-Third-Octave-Band Sound Pressure Levels
ASTM D7427-16(2021) Standard Test Method for Immunological Measurement of Four Principal Allergenic Proteins (Hev b 1, 3, 5 and 6.02) in Hevea Natural Rubber and Its Products Derived from Latex
ASTM D7427-08 Standard Test Method for Immunological Measurement of Four Principal Allergenic Proteins (Hev b 1, 3, 5 and 6.02) in Natural Rubber and Its Products Derived from Latex
ASTM D7427-16 Standard Test Method for Immunological Measurement of Four Principal Allergenic Proteins (Hev b 1, 3, 5 and 6.02) in Hevea Natural Rubber and Its Products Derived from Latex
ASTM D7066-04 Standard Test Method for dimer/trimer of chlorotrifluoroethylene (S-316) Recoverable Oil and Grease and Nonpolar Material by Infrared Determination
ASTM E1647-98a Standard Practice for Determining Contrast Sensitivity in Radioscopy

IT-UNI, Three times the detection line

UNI 6808-1972
UNI EN 12543-2-2021 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method

Professional Standard - Nuclear Industry, Three times the detection line

EJ/T 505-1990 Radiographic Inspection of Welds in 300MW PWR Nuclear Power Plant

Shandong Provincial Standard of the People's Republic of China, Three times the detection line

DB37/T 1678-2010 Rapid Determination of Melamine in Feed

Danish Standards Foundation, Three times the detection line

DS/EN ISO 17636-2:2013 Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-ray techniques with digital detectors
DS/EN 13068-3:2001 Non-destructive testing - Radioscopic testing - Part 3: General principles of radioscopic testing of metallic materials by X- and gamma rays
DS/EN ISO 17636-1:2013 Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film
DS/EN 13068-1:2002 Non-destructive testing - Radioscopic testing - Part 1: Quantitative measurement of imaging properties
DS/EN 12679:2002 Non-destructive testing - Determination of the size of industrial radiographic sources - Radiographic method
DS/EN ISO 10893-6:2011 Non-destructive testing of steel tubes - Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections
DS/EN 61265:1995 Electroacoustics - Instruments for measurement of aircraft noise - Performance requirements for systems to measure one-third-octave band sound pressure levels in noise certification of transport-category aeroplanes
DS/EN ISO 10893-7:2011 Non-destructive testing of steel tubes - Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections
DS/EN 13100-2:2005 Non-destructive testing of welded joints of thermoplastics semi-finished products - Part 2: X-ray radiographic testing
DS/EN ISO 10675-2:2013 Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 2: Aluminium and its alloys
DS/EN 100012:1995 Basic Specification: X-ray inspection of electronic components
DS/EN 1330-3:1998 Non-destructive testing - Terminology - Part 3: Terms used in industrial radiographic testing
DS/EN ISO 10675-1:2013 Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 1: Steel, nickel, titanium and their alloys
DS/EN 444:1994 Non-destructive testing-General principles for radiographic examination of metallic materials by X-and gamma-rays
DS/EN 12543-3:2000 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 3: Slit camera radiographic method
DS/ISO 11843-5:2008 Capability of detection - Part 5: Methodology in the linear and non-linear calibration cases
DS/EN 13068-2:2000 Non-destructive testing - Radioscopic testing - Part 2: Qualitative control and long term stability of imaging devices
DS/EN 12543-2:2008 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method
DS/EN 1971-1:2012 Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 1: Test with an encircling test coil on the outer surface
DS/EN 12544-2:2000 Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 2: Constancy check by the thick filter method
DS/EN 12543-5:2000 Non-destructive testing - Characteristics of focal spot in industrial X-ray systems for use in non-destructive testing - Part 5: Measurement of the effective focal spot size of mini and micro focus X-ray tubes
DS/EN 62220-1-2:2008 Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 1-2: Determination of the detective quantum efficiency - Detectors used in mammography
DS/EN 12543-1:2002 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 1: Scanning method
DS/EN 12543-4:2000 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 4: Edge method
DS/EN 14784-2:2005 Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 2: General principles for testing of metallic materials using X-rays and gamma rays

RU-GOST R, Three times the detection line

GOST 11612.7-1983 Photomultipliers. Measuring methods of light and spectral equivalent of anode current noise produced by luminous flux
GOST ISO 17636-1-2017 Non-destructive testing of welds. Radiographic testing. Part 1. X- and gamma-ray control techniques with film
GOST 8.331-1999 State system for ensuring the uniformity of measurement. Distortion meters. Methods and means of verification and calibration

SE-SIS, Three times the detection line

SIS SS 11 49 25-1980 Radiographic testing — X-ray tubes — Determination of the dimensions of focal spot

国家市场监督管理总局、中国国家标准化管理委员会, Three times the detection line

GB/T 34874.6-2020 Geometrical product specifications (GPS)—X-ray three dimensional size measuring machines—Part 6: Testing method of workpieces
GB/T 3323.1-2019 Non-destructive testing of welds—Radiographic testing—Part 1:X- and gamma-ray techniques with film
GB/T 40791-2021 Non-destructive testing of steel tubes—Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections
GB/T 26642-2022 Non-destructive testing—Industrial computed radiography with storage phosphor imaging plates—General principles for testing of metallic materials using X-rays and gamma rays
GB/T 40385-2021 Non-destructive testing of steel tubes—Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections
GB/T 3323.2-2019 Non-destructive testing of welds—Radiographic testing—Part 2:X- and gamma-ray techniques with digital detectors
GB/T 37512-2019 Inspection of grain and oils—Determination of the difference between actual and theoretical content of triacylglycerols with ECN 42
GB/T 23901.1-2019 Non-destructive testing—Image quality of radiographs—Part 1: Determination of the image quality value using wire-type image quality indicators
GB/T 23901.2-2019 Non-destructive testing—Image quality of radiographs—Part 2:Determination of the image quality value using step/hole-type image quality indicators

Lithuanian Standards Office , Three times the detection line

LST EN 13068-3-2002 Non-destructive testing - Radioscopic testing - Part 3: General principles of radioscopic testing of metallic materials by X- and gamma rays
LST EN 1435-1998 Non-destructive examination of welds - Radiographic examination of welded joints
LST EN 1435-1998/A1-2002 Non-destructive testing of welds - Radiographic testing of welded joints
LST EN 1435-1998/A2-2004 Non-destructive testing of welds - Radiographic testing of welded joints
LST EN 13068-1-2001 Non-destructive testing - Radioscopic testing - Part 1: Quantitative measurement of imaging properties
LST EN ISO 17636-2:2013 Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-ray techniques with digital detectors (ISO 17636-2:2013)
LST EN ISO 17636-1:2013 Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film (ISO 17636-1:2013)
LST EN 12679-2002 Non-destructive testing - Determination of the size of industrial radiographic sources - Radiographic method
LST EN 13068-2-2001 Non-destructive testing - Radioscopic testing - Part 2: Check of long term stability of imaging devices
LST EN 61265-2001 Electroacoustics. Instruments for measurement of aircraft noise. Performance requirements for systems to measure one-third-octave band sound pressure levels in noise certification of transport-category aeroplanes (IEC 61265:1995)
LST EN 13100-2-2005 Non-destructive testing of welded joints in thermoplastics semi-finished products - Part 2: X-ray radiographic testing
LST EN 444-1998 Non-destructive testing - General principles for radiographic examination of metallic materials by X- and gamma-rays
LST EN ISO 10893-7:2011 Non-destructive testing of steel tubes - Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-7:2011)
LST EN 1330-3-2004 Non-destructive testing - Terminology - Part 3: Terms used in industrial radiographic testing
LST EN 100012-2001 Basic specification: X-ray inspection of electronic components
LST EN 12543-3-2001 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 3: Slit camera radiographic method
LST EN 12543-2-2008 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method
LST EN 12543-2-2021 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method
LST EN 1971-1-2012 Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 1: Test with an encircling test coil on the outer surface
LST EN 12544-2-2001 Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 2: Constancy check by the thick filter method
LST EN 12543-5-2001 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 5: Measurement of the effective focal spot size of mini and micro focus X-ray tubes
LST EN 12543-1-2001 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 1: Scanning method
LST EN 12543-4-2001 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 4: Edge method
LST EN 14784-2-2005 Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 2: General principles for testing of metallic materials using X-rays and gamma rays

AENOR, Three times the detection line

UNE-EN 13068-3:2002 NON-DESTRUCTIVE TESTING - RADIOSCOPIC TESTING - PART 3: GENERAL PRINCIPLES OF RADIOSCOPIC TESTING OF METALLIC MATERIALS BY X-AND GAMMA RAYS.
UNE-EN ISO 17636-2:2013 Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-ray techniques with digital detectors (ISO 17636-2:2013)
UNE-EN 16407-1:2014 Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 1: Tangential radiographic inspection
UNE-EN 16407-2:2014 Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 2: Double wall radiographic inspection
UNE-EN 61265:1997 ELECTROACUSTICS. INSTRUMENTS FOR MEASUREMENT OF AIRCRAFT NOISE. PERFORMANCE REQUIREMENTS FOR SYSTEMS TO MEASURE ONE-THIRD-OCTAVE BAND SOUND PRESSURE LEVELS IN NOISE CERTIFICATIONS OF TRANSPORT-CATEGORY AEROPLANES.
UNE-EN ISO 17636-1:2013 Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film (ISO 17636-1:2013)
UNE-EN 13100-2:2005 Non-destructive testing of welded joints in thermoplastics semi-finished products - Part 2: X-ray radiographic testing
UNE-EN ISO 10893-7:2011 Non-destructive testing of steel tubes - Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-7:2011)
UNE-EN 13068-2:2000 Non-destructive testing. Radioscopic testing. Part 2: Check of long term stability of imaging devices.
UNE-EN ISO 10675-2:2013 Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 2: Aluminium and its alloys (ISO 10675-2:2010)
UNE-EN 12543-2:2009 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method
UNE-EN 1971-1:2012 Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 1: Test with an encircling test coil on the outer surface
UNE-EN 12543-4:2000 NON-DESTRUCTIVE TESTING - CHARACTERISTICS OF FOCAL SPOTS IN INDUSTRIAL X-RAY SYSTEMS FOR USE IN NON-DESTRUCTIVE TESTING - PART 4: EDGE METHOD.
UNE-EN 62220-1-2:2008 Medical electrical equipment - Characteristics of digital X-ray imaging devices -- Part 1-2: Determination of the detective quantum efficiency - Detectors used in mammography.
UNE-EN 12543-5:2000 NON-DESTRUCTIVE TESTING - CHARACTERISTICS OF FOCAL SPOTS IN INDUSTRIAL X-RAY SYSTEMS FOR UE IN NON-DESTRUCTIVE TESTING - PART 5: MEASUREMENT OF THE EFFECTIVE FOCAL SPOT SIZE OF MINI AND MICRO FOCUS X-RAY TUBES.
UNE-EN 12543-1:2000 NON-DESTRUCTIVE TESTING - CHARACTERISTICS OF FOCAL SPOTS IN INDUSTRIAL X-RAY SYSTEMS FOR USE IN NON-DESTRUCTIVE TESTING - PART 1: SCANNING METHOD.
UNE-EN ISO 10675-1:2017 Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 1: Steel, nickel, titanium and their alloys (ISO 10675-1:2016)
UNE-EN 14784-2:2006 Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 2: General principles for testing of metallic materials using X-rays and gamma rays

International Organization for Standardization (ISO), Three times the detection line

ISO/CD 32679:2011 Non-destructive testing — Radiographic testing — Determination of the size of industrial radiographic gamma sources
ISO/DIS 32679:2023 Non-destructive testing — Radiographic testing — Determination of the size of industrial radiographic gamma sources
ISO 17636-1:2022 Non-destructive testing of welds — Radiographic testing — Part 1: X- and gamma-ray techniques with film
ISO 17636-2:2022 Non-destructive testing of welds — Radiographic testing — Part 2: X- and gamma-ray techniques with digital detectors
ISO 17636-2:2013 Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-ray techniques with digital detectors
ISO 17636-1:2013 Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film
ISO 10893-7:2011 Non-destructive testing of steel tubes - Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections
ISO 20769-1:2018 Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 1: Tangential radiographic inspection
ISO 20769-2:2018 Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 2: Double wall radiographic inspection
ISO 11093-6:2005 Paper and board - Testing of cores - Part 6: Determination of bending strength by the three-point method
ISO 11093-6:1996 Paper and board - Testing of cores - Part 6: Determination of bending strength by the three-point method
ISO 10675-2:2021 Non-destructive testing of welds — Acceptance levels for radiographic testing — Part 2: Aluminium and its alloys
ISO 23159:2020 Non-destructive testing — Gamma ray scanning method on process columns
ISO 10675-1:2016 Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 1: Steel, nickel, titanium and their alloys
ISO 10675-1:2021 Non-destructive testing of welds — Acceptance levels for radiographic testing — Part 1: Steel, nickel, titanium and their alloys
ISO 10893-6:2019 Non-destructive testing of steel tubes — Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections
ISO 10893-6:2011 Non-destructive testing of steel tubes - Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections
ISO 11843-5:2008 Capability of detection - Part 5: Methodology in the linear and non-linear calibration cases

HU-MSZT, Three times the detection line

Association of German Mechanical Engineers, Three times the detection line

VDI/VDE 2617 Blatt 6.3-2008 Accuracy of coordinate measuring machines - Characteristics and their checking - Coordinate measuring machines with multiple probing systems
VDI/VDE 2617 Blatt 2.3-2006 Accuracy of coordinate measuring machines - Characteristics and checking of characteristics - Acceptance and reverification tests for coordinate measuring machines of large dimensions
VDI/VDE 2617 Blatt 11-2011 Accuracy of coordinate measuring machines - Characteristics and their checking - Determination of the uncertainty of measurement for coordinate measuring machines using uncertainty budgets
VDI/VDE 2617 Blatt 4-2006 Accuracy of coordinate measuring machines - Characteristics and their checking - Manual for the use of DIN EN ISO 10360-3 for coordinate measuring machines with additional axes of rotation
VDI/VDE/DGQ 2618 Blatt 10.8-2002 Inspection of measuring and test equipment - Test instruction for internal micrometers with three-point-contact
VDI/VDE/DGQ 2618 Blatt 6.1-2009 Inspection of measuring and test equipment - Test instruction for optical flats and optical parallels

Defense Logistics Agency, Three times the detection line

DLA SMD-5962-94748-1994 MICROCIRCUIT, LINEAR, 135 MHZ TRIPLE 8-BIT D/A CONVERTERS WITH 256 WORD COLOR PALETTE RAM, MONOLITHIC SILICON
DLA SMD-5962-96862 REV A-2008 MICROCIRCUIT, DIGITAL, ADVANCED HIGH SPEED CMOS, QUADRUPLE BUS BUFFER GATE WITH THREE-STATE OUTPUTS, MONOLITHIC SILICON
DLA SMD-5962-96868 REV A-2008 MICROCIRCUIT, DIGITAL, ADVANCED HIGHSPEED CMOS, QUADRUPLE BUS BUFFER GATE WITH THREE-STATE OUTPUTS, MONOLITHIC SILICON

AT-ON, Three times the detection line

OENORM EN ISO 17636-2:2021 Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-ray techniques with digital detectors (ISO/DIS 17636-2:2021)
ONORM M 3040 Teil.3-1988 ?NORM M 3040 Part 3; Requirements for Nondestructive Testing Personnel (NDT-personnel); Level III
ONORM S 5240-10-1998 Image quality assurance in X-ray diagnosis - Acceptancetesting in radiographic and fluoroscopic X-ray Systems
OENORM EN ISO 17636-1:2021 Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film (ISO/DIS 17636-1:2021)
OENORM EN 12543-2-2021 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method

European Committee for Standardization (CEN), Three times the detection line

prEN ISO 17636-2:2021 Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-ray techniques with digital detectors (ISO/DIS 17636-2:2021)
EN ISO 17636-1:2022 Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film (ISO 17636-1:2022)
EN 13068-3:2001 Non-destructive testing - Radioscopic testing - Part 3: General principles of radioscopic testing of metallic materials by X- and gamma rays
EN ISO 17636-2:2022 Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-ray techniques with digital detectors (ISO 17636-2:2022, Corrected version 2023-02)
EN 13068-1:1999 Non-destructive testing - Radioscopic testing - Part 1: Quantitative measurement of imaging properties
prEN ISO 17636-1:2021 Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film (ISO/DIS 17636-1:2021)
EN ISO 17636-1:2013 Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film
EN 16407-1:2012 Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 1: Tangential radiographic inspection
EN 16407-1:2014 Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 1: Tangential radiographic inspection
EN ISO 17636-2:2013 Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-ray techniques with digital detectors
PD CEN/TR 15589:2014 Non destructive testing - Code of practice for the approval of NDT personnel by recognised third party organisations under the provisions of Directive 97/23/EC
EN 13068-2:1999 Non-destructive testing - Radioscopic testing - Part 2: Check of long term stability of imaging devices
EN 1716:1997 Plastics piping systems - Polyethylene (PE) tapping tees - Test method for impact resistance of an assembled tapping tee
EN ISO 10893-6:2011 Non-destructive testing of steel tubes - Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-6:2011)
EN 12679:1999 Non-destructive testing - Determination of the size of industrial radiographic sources - Radiographic method
FprEN ISO 10675-2:2021 Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 2: Aluminium and its alloys (ISO/FDIS 10675-2:2021)
EN ISO 10675-2:2013 Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 2: Aluminium and its alloys
EN ISO 10675-2:2017 Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 2: Aluminium and its alloys
EN ISO 10675-2:2021 Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 2: Aluminium and its alloys (ISO 10675-2:2021, Corrected version 2022-02)

CH-SNV, Three times the detection line

VSM 18010-1971
SNV 81110-1942 Textiles — Tests for colour fastness Section G01: Colour fastness to nitrogen oxides
SEV 0178-1957
SN 119 800-1990
SNV 24547
SN ISO 105/E08:1984 Textiles — Tests for colour fastness Section B02: Colour fastness to light: Xenon arc
SNV 81050-1951
VSM 34218.1-1938
SN EN 12543-2-2021 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method

BR-ABNT, Three times the detection line

GOSTR, Three times the detection line

GOST ISO 17636-2-2017 Non-destructive testing of welds. Radiographic testing. Part 2. X- and gamma-ray control techniques with digital detectors
GOST R ISO 10360-2-2017 Geometrical product specifications. Acceptance and reverification tests for coordinate measuring machines. Сoordinate measuring machines used for measuring linear dimensions

ES-UNE, Three times the detection line

UNE-EN ISO 17636-2:2023 Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-ray techniques with digital detectors (ISO 17636-2:2022, Corrected version 2023-02)
UNE-EN ISO 10893-6:2019 Non-destructive testing of steel tubes - Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-6:2019)
UNE-EN 13100-2:2021 Non-destructive testing of welded joints in thermoplastics semi- finished products - Part 2: X-ray radiographic testing
UNE-EN 12679:2019 Non-destructive testing - Radiographic testing - Determination of the size of industrial radiographic gamma sources
UNE-CEN/TR 15589:2014 Non destructive testing - Code of practice for the approval of NDT personnel by recognised third party organisations under the provisions of Directive 97/23/EC (Endorsed by AENOR in August of 2014.)
UNE-EN ISO 20769-2:2019 Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 2: Double wall radiographic inspection (ISO 20769-2:2018)
UNE-EN ISO 20769-1:2019 Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X - and gamma rays - Part 1: Tangential radiographic inspection (ISO 20769-1:2018)
UNE-EN ISO 10675-2:2022 Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 2: Aluminium and its alloys (ISO 10675-2:2021, Corrected version 2022-02)
UNE-EN 17263:2020 Copper and copper alloys - Eddy current testing on the outer surface of rods, bars, hollow rods and wires for the detection of defects by encircling test coil
UNE-EN ISO 10675-1:2022 Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 1: Steel, nickel, titanium and their alloys (ISO 10675-1:2021)
UNE-EN ISO 16526-2:2020 Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 2: Constancy check by the thick filter method (ISO 16526-2:2011)

International Telecommunication Union (ITU), Three times the detection line

ITU-R SM.1837 SPANISH-2007 Test procedure for measuring the 3rd order intercept point (IP3) level of radio monitoring receivers Procedimiento de prueba para medir el nivel del punto de intercepci髇 de 3er orden (IP3) de los receptores de comprobaci髇 t閏nica radioel閏trica
ITU-R SM.1837-1-2013 Test procedure for measuring the 3rd order intercept point (IP3) level of radio monitoring receivers
ITU-R SM.1837 FRENCH-2007 Test procedure for measuring the 3rd order intercept point (IP3) level of radio monitoring receivers Proc閐ure d'essai pour mesurer le niveau du point d'interception de troisi鑝e ordre (IP3) des r閏epteurs de contr鬺e des 閙issions
ITU-R SM.1837-2013 Test procedure for measuring the 3rd order intercept point (IP3) level of radio monitoring receivers

Universal Oil Products Company (UOP), Three times the detection line

UOP 733-2010 Residual Triglycerides in Deoxygenated Feedstocks by GC

International Electrotechnical Commission (IEC), Three times the detection line

IEC 61265:1995/COR1:1995 Electroacoustics - Instruments for measurement of aircraft noise - Performance requirements for systems to measure one-third-octave band sound pressure levels in noise certification of transport-category aeroplanes
IEC 61265:1995 Electroacoustics - Instruments for measurement of aircraft noise - Performance requirements for systems to measure one-third-octave band sound pressure levels in noise certification of transport-category aeroplanes

KR-KS, Three times the detection line

KS C IEC 61265-2017 Electroacoustics — Instruments for measurement of aircraft noise — Performance requirements for systems to measure one-third-octave band sound pressure levels in noise certification of transport-categ
KS D 0242-2023 Radiographic testing for welded joints in aluminium
KS D 0237-2023 Radiographic testing for welded joints in stainless steel
KS C IEC 61779-3-2003(2023)
KS B ISO 23159-2022 Non-destructive testing — Gamma ray scanning method on process columns
KS Q ISO 11843-5-2018(2023) Capability of detection — Part 5: Methodology in the linear and non-linear calibration cases
KS Q ISO 11843-5-2018 Capability of detection — Part 5: Methodology in the linear and non-linear calibration cases

UNKNOWN, Three times the detection line

KJ 201908

American Society of Mechanical Engineers (ASME), Three times the detection line

ASME SEC V B SE-1030-2003 Standard Test Method for Radiographic Examination of Metallic Castings ASTM E 1030-00
ASME SEC V B SE-1416-2001 Standard Test Method for Radioscopic Examination of Weldments ASTM E1416-96

Guangxi Provincial Standard of the People's Republic of China, Three times the detection line

DB45/T 1423-2016 Detection and characterization methods of graphene three-dimensional structure powder materials

European Committee for Electrotechnical Standardization（CENELEC）, Three times the detection line

EN 61265:1995 Electroacoustics Instruments for Measurement of Aircraft Noise Performance Requirements for Systems to Measure One-Third-Octave Band Sound Pressure Levels in Noise Certification of Transport-Category Aeroplanes
EN 100012:1995 Basic Specification: X-Ray Inspection of Electronic Components

Professional Standard - Agriculture, Three times the detection line

水产品质量安全检验手册 9.3.3.0-2005 Chapter IX Fishing Feed Inspection Section 3 Fishing Feed Routine Physical and Chemical Testing Methods 3. Determination of Chromium in Fishing Feed - Spectrophotometric Method (GBT 13088-1991)
水产品质量安全检验手册 9.3.13.1-2005 Chapter IX Fishing Feed Inspection Section 3 Fishing Feed Routine Physical and Chemical Testing Methods 13. Determination of Water-Soluble Chloride in Fishing Feed (GBT 6439-1992) (1) Routine Determination
水产品质量安全检验手册 9.3.13.2-2005 Chapter Nine Fishing Feed Inspection Section III Fishing Feed Routine Physical and Chemical Testing Methods XIII. Determination of Water Soluble Chloride in Fishing Feed (GBT 6439-1992) (2) Rapid Determination
KJ 201907 Rapid detection of melamine in liquid milk by colloidal gold immunochromatography
水产品质量安全检验手册 4.3.3.0-2005 Chapter 4 Inspection of Toxic Substances in Aquatic Products Section 3 Determination of Diarrheal Shellfish Toxin (DSP) 3. Liquid Chromatography
水产品质量安全检验手册 7.3.1.3-2005 Chapter 7 Inspection of Additives in Aquatic Products Section 3 Determination of Preservatives in Aquatic Products 1. Determination of Sorbic Acid and Benzoic Acid (GBT 5009.29-2003) (3) Thin Layer Chromatography
水产品质量安全检验手册 9.1.3.0-2005 Chapter 9 Inspection of Fishing Feed Section 1 Basic Method of Testing Fishing Feed 3. Determination of Crude Ash in Fishing Feed (GBT 6438-1992)
水产品质量安全检验手册 9.3.4.0-2005 Chapter IX Fishing Feed Inspection Section 3 Fishing Feed Routine Physical and Chemical Testing Methods 4. Determination of Mercury in Fishing Feed (GBT 13081-1991)
水产品质量安全检验手册 7.3.3.0-2005 Chapter 7 Inspection of Additives in Aquatic Products Section 3 Determination of Preservatives in Aquatic Products 3. Determination of Parabens - Gas Chromatography (GBT 5009.31-2003)

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, Three times the detection line

ITU-R SM.1837-2007 Test procedure for measuring the 3rd order intercept point (IP3) level of radio monitoring receivers
ITU-R SM.IP3-2007 Test procedure for measuring the 3rd order intercept point (IP3) level of radio monitoring receivers (Document 1/BL/20-E)

CZ-CSN, Three times the detection line

CSN 80 0705-1970 Detection of dimensional changes o? yarns by íelting
CSN 01 5010-1976 Radiographic detection of defects of material.Basic regulations
CSN 73 0275-1985 Accuracy of geometrie parameters in building. Check measurement of line structures

CEN - European Committee for Standardization, Three times the detection line

EN ISO 20769-1:2018 Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X - and gamma rays - Part 1: Tangential radiographic inspection
EN ISO 20769-2:2018 Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 2: Double wall radiographic inspection
PREN 13100-2-2018 Non-destructive testing of welded joints in thermoplastics semi-finished products - Part 2: X-ray radiographic testing
EN ISO 10893-6:2019 Non-destructive testing of steel tubes - Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections
EN 12679:2018 Non-destructive testing - Radiographic testing - Determination of the size of industrial radiographic gamma sources
PREN 17263-2018 Copper and copper alloys - Eddy current testing on the outer surface of rods@ bars@ hollow rods and wires for the detection of defects by encircling test coil
EN 12517:1998 Non-destructive testing of welds Radiographic testing of welded joints Acceptance levels (Incorporates Amendment A1: 2002)
PREN 12543-2-2019 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method
PREN 1971-1-2019 Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 1: Test with an encircling test coil on the outer surface

Indonesia Standards, Three times the detection line

SNI ISO 10675-2:2010 Non-destructive testing of welds - Acceptance levels for radiographic testing - part 2 : Alumunium and its alloys
SNI ISO 10675-1:2010 Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 1 : Steel, nickel, titanium and their alloys
SNI ISO 16526-2:2013

National Association of Pipe Fabricators (NAPF), Three times the detection line

PFI ES-16-2004 Access Holes, Bosses and Plugs for Radiographic Inspection of Pipe Welds
PFI ES-16-1985 Access Holes, Bosses and Plugs for Radiographic Inspection of Pipe Welds R(2001)

ESDU - Engineering Sciences Data Unit, Three times the detection line

ESDU 82027 B ADD-1983 Estimation of lateral attenuation of air-to-ground jet or turbofan aircraft noise in one-third octave bands Addendum Estimation of sideline noise in subjective noise metrics

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Three times the detection line

ASHRAE 3899-1995 Fault Direction Space Method for On-Line Fault Detection
ASHRAE AC-02-14-2-2002 Comparison of Three Fault Detection Methods Based on Field Data of an Air-Handling Unit

Professional Standard - Machinery, Three times the detection line

JB/T 11602.3-2013 Non-desturctive testing instruments.Measurement and evaluation of the X-ray tube voltage.Part 3: Spectrometric detect
JB/T 11602.1-2013 Non-destructive testing instruments.Measurement and evaluation of the X-ray tube voltage.Part 1: Voltage divider method

Professional Standard - Non-ferrous Metal, Three times the detection line

YS/T 63.14-2006 Carbonaceous materials used in the production of aluminium-Part 14:Determination of bending/shear strength by a three-point method
YS/T 63.14-2023 Carbonaceous materials used for the production of aluminium — Part 14:Determination of bending/shears strength — Three point method

ATIS - Alliance for Telecommunications Industry Solutions, Three times the detection line

T1.TR.43-1995 Algorithms for Load Coil Detection on Metallic Pairs Assigned to Digital Subscriber Lines

ZA-SANS, Three times the detection line

SANS 11843-2:2009 Capability of detection Part 2: Methodology in the linear calibration case
SANS 11843-5:2009 Capability of detection Part 5: Methodology in the linear and non-linear calibration cases

SAE - SAE International, Three times the detection line

SAE AS7114/4A-2008 NADCAP Requirements for Nondestructive Testing Facility Radiography
SAE AIR4964-1998 Exposure Levels of UV Radiation in Nondestructive Inspection Processes

American National Standards Institute （ANSI), Three times the detection line

ANSI N42.47-2010 Measuring the Imaging Performance of X-ray and Gamma-ray Systems for Security Screening of Humans
ANSI/TIA/EIA 136-250-2001 TDMA Third Generation Wireless - Minimum Performance Standards for ACELP Voice Activity Detection (VAD)

Inner Mongolia Provincial Standard of the People's Republic of China, Three times the detection line

DB15/T 2855-2023 Technical regulations for qPCR detection of D. destructor in potato

US-CLSI, Three times the detection line

CLSI MM01-A3-2012 Molecular Methods for Clinical Genetics and Oncology Testing; Approved Guideline - Third Edition

Professional Standard - Electron, Three times the detection line

SJ/Z 9094.12-1987 Methods of measurement for equipmemt used in terrestrial radio-relay systems--Part 3: Simulated systems--Section 3: Measurements for monochrome and colour television transmission

PL-PKN, Three times the detection line

PN-EN 12543-2-2021-09 E Non-destructive testing -- Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing -- Part 2: Pinhole camera radiographic method

Canadian Standards Association (CSA), Three times the detection line

CSA C22.2 NO.26-2013 Construction and test of wireways, auxiliary gutters, and associated fittings (Third Edition)

NL-NEN, Three times the detection line

NEN-EN 462-1-1994 Non-destructive testing;lmage quality of radiographs.Part 1:lmage quality indicators(wire type).Determination of image quality value

American Welding Society (AWS), Three times the detection line

AWS PRG-1995 The Practical Reference Guide for Radiographic Inspection - Acceptance Criteria

Society of Automotive Engineers (SAE), Three times the detection line

SAE AIR4964-2019 Exposure Levels of UV Radiation in Nondestructive Inspection Processes