ZH
RU
ES
Particle size of general powder
Particle size of general powder, Total:64 items.
In the international standard classification, Particle size of general powder involves: Particle size analysis. Sieving, Analytical chemistry, Powder metallurgy, Ceramics, Products of the chemical industry, Production of metals, Construction materials, Road engineering, Materials for aerospace construction, Non-metalliferous minerals, Iron and steel products, Cereals, pulses and derived products, Aids for disabled or handicapped persons, Technical product documentation, Plastics.
RO-ASRO, Particle size of general powder
- STAS 9546/7-1973 CHRYSOTYL ASBESTOS Determination of particle size of powdered asbestos
IN-BIS, Particle size of general powder
Universal Oil Products Company (UOP), Particle size of general powder
- UOP 856-2007 PARTICLE SIZE DISTRIBUTION OF POWDERS BY LASER LIGHT SCATTERING
AENOR, Particle size of general powder
American Society for Testing and Materials (ASTM), Particle size of general powder
- ASTM D5158-98 Standard Test Method for Determination of the Particle Size of Powdered Activated Carbon by Air Jet Sieving
- ASTM D5158-98(2005) Standard Test Method for Determination of Particle Size of Powdered Activated Carbon by Air Jet Sieving
- ASTM E2980-20 Standard Test Methods for Estimating Average Particle Size of Powders Using Air Permeability
- ASTM E2980-14 Standard Test Methods for Estimating Average Particle Size of Powders Using Air Permeability
- ASTM C690-09(2014) Standard Test Method for Particle Size Distribution of Alumina or Quartz Powders by Electrical Sensing Zone Technique
- ASTM B859-03 Standard Practice for De-Agglomeration of Refractory Metal Powders and Their Compounds Prior to Particle Size Analysis
- ASTM B859-03(2008)e1 Standard Practice for De-Agglomeration of Refractory Metal Powders and Their Compounds Prior to Particle Size Analysis
- ASTM B859-13 Standard Practice for De-Agglomeration of Refractory Metal Powders and Their Compounds Prior to Particle Size Analysis
- ASTM D5158-98(2013) Standard Test Method for Determination of Particle Size of Powdered Activated Carbon by Air Jet Sieving
- ASTM C721-20 Standard Test Methods for Estimating Average Particle Size of Alumina and Silica Powders by Air Permeability
- ASTM C721-15 Standard Test Methods for Estimating Average Particle Size of Alumina and Silica Powders by Air Permeability
- ASTM R0007 General Description of Production, Properties, and Uses of Sintered Metal Powder Bearings and Structural Parts (This is not an ASTM Standard; available as PDF, only)
CZ-CSN, Particle size of general powder
British Standards Institution (BSI), Particle size of general powder
- BS EN 725-5:2007 Advanced technical ceramics - Methods of test for ceramic powders - Determination of particle size distribution
- BS EN 933-9:2009 Tests for geometrical properties of aggregates - Assessment of fines - Methylene blue test
- BS ISO 14703:2009 Fine ceramics (advanced ceramics, advanced technical ceramics). Sample preparation for the determination of particle size distribution of ceramic powders
- BS ISO 14703:2008 Fine ceramics (advanced ceramics, advanced technical ceramics) - Sample preparation for the determination of particle size distribution of ceramic powders
- BS ISO 20720:2018 Microbeam analysis. Methods of specimen preparation for analysis of general powders using WDS and EDS
- BS DD CEN/TS 15465:2008 Cereals and cereal products - Durum wheat (T. durum Desf.) - General guidelines for instrumental methods measurement of semolina colour
- DD CEN/TS 15465:2008 Cereals and cereal products. Durum wheat (T. durum Desf.). General guidelines for instrumental methods measurement of semolina colour
- BS EN ISO 10724-1:2001 Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - General principles and moulding of multipurpose test specimens
- BS EN ISO 10724-1:1999 Plastics. Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs). General principles and moulding of multipurpose test specimens
- BS 1902 Sec.3.5:1981 Methods of testing refractory materials. General and textural properties. Determination of powder density (method 1902-305)
Japanese Industrial Standards Committee (JISC), Particle size of general powder
- JIS H 7803:2005 General rules for the determination of particle size and crystallite size in metal catalysts
- JIS Z 8820-1:2002 Determination of particle size distribution by gravitational liquid sedimentation methods -- Part 1: General principles and guidelines
Korean Agency for Technology and Standards (KATS), Particle size of general powder
- KS A 0508-2003 GENERAL RULES FOR THE DETERMINATION OF PARTICLE SIZE DISTRIBUTION BY SEDIMENTATION IN LIQUID
- KS L ISO 24235:2008 Fine ceramics (advanced ceramics, advanced technical ceramics)-Determination of particle size distribution of ceramic powders by laser diffraction method
- KS M ISO 10724-1-2010(2020) Plastics－Injection moulding of test specimens of thermosetting powder moulding compounds(PMCs)－Part 1：General principles and moulding of multipurpose test specimens
RU-GOST R, Particle size of general powder
- GOST 32719-2014 Automobile roads of general use. Mineral powder. Method of determination of the grain
- GOST 32707-2014 Automobile roads of general use. Mineral powder. Method for determination of swelling samples from a mixture of powder with bitumen
- GOST 25796.0-1983 Raw clay in the production of clay powders for drilling muds. General requirements for the methods of testing
- GOST 28393-1989 PM bars and strips of high-speed steel. General specifications
- GOST 32727-2014 Automobile roads of general use. Natural and crushed sand. Determination of particle size distribution and size of the module
- GOST R 59651-2021 Steel and alloy products made by injection molding of polymeric materials highly filled with metal powders (MIM-technology). General specifications
- PNST 77-2015 Automobile roads of general use. Mineral materials for preparing asphalt mixtures. Method for determination of the maximum destiny of mineral powder
Defense Logistics Agency, Particle size of general powder
- DLA MIL-B-5687 D REINST NOTICE 3-2003 BEARINGS, SLEEVE, WASHERS, THRUST, SINTERED, METAL POWDER, OIL-IMPREGNATED, GENERAL SPECIFICATION FOR
- DLA MIL-B-5687 D NOTICE 1-1997 BEARINGS, SLEEVE, WASHERS, THRUST, SINTERED, METAL POWDER, OIL-IMPREGNATED, GENERAL SPECIFICATION FOR
- DLA MIL-B-5687 D (1)-1988 BEARINGS, SLEEVE, WASHERS, THRUST, SINTERED, METAL POWDER, OIL-IMPREGNATED, GENERAL SPECIFICATION FOR
- DLA MIL-B-5687 D-1984 BEARINGS, SLEEVE, WASHERS, THRUST, SINTERED, METAL POWDER, OIL-IMPREGNATED, GENERAL SPECIFICATION FOR
International Organization for Standardization (ISO), Particle size of general powder
- ISO 14703:2008 Fine ceramics (advanced ceramics, advanced technical ceramics) - Sample preparation for the determination of particle size distribution of ceramic powders
- ISO 24235:2007 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of particle size distribution of ceramic powders by laser diffraction method
- ISO 20720:2018 Microbeam analysis - Methods of specimen preparation for analysis of general powders using WDS and EDS
- ISO 17190-3:2020 Urine-absorbing aids for incontinence — Polyacrylate superabsorbent powders — Part 3: Test method for determination of the particle size distribution by sieve fractionation
PL-PKN, Particle size of general powder
- PN C99045-06-1990 Photographic black-and-white fixing agents Qualitative and usable characteristic of fixing agents in powder for general use OG-04 (11-04)
- PN C99045-03-1986 Photographic black-and white fixing agents Qualitative and usable characteristic of fixing anents in powder for genera? use OG-Ol (11-01)
- PN C99040-05-1987 |Photographic black-and-white developers Qua]itative and usable characteristic of positiv develoDers in powder for genera? use OPG-03 (121-03)
- PN C99040-06-1987 Photographig_ black-and-white developers Qualitative and usable characteristic of negative dcvelopers in powder for genera? use ONG-04 (Hl-04)
- PN C99040-07-1987 Photographic black-and white dcvelopers Qualitative and usable characteristic of positive developers in powdcr for genera? use OPG-05 (121-05)
GOSTR, Particle size of general powder
- GOST R 59036-2020 Additive technologies. Production based on selective laser melt of metal powders. General provisions
- GOST R 59185-2020 Additive technology. Products obtained by selective laser melting of powder material ВТ6. General specifications
- GOST R 59183-2020 Additive technologies. Products obtained by selective laser melting of powder material 08Х18Н10Т. General specifications
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Particle size of general powder
- PREN 3225-1-1993 Aerospace Series Heat Resisting Alloys Produced from Atomized Powder Powder Compacted Forging Stock and Parts Technical Specification Part 1 - General Requirements (Edition P 1)
未注明发布机构, Particle size of general powder
- BS 2590-1:1969(2000) Specification for Powder metallurgical products (P.M. Products) — Part 1 : Sintered metal components for general engineering purposes
Association Francaise de Normalisation, Particle size of general powder
- NF B41-204:2002 Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 3 : determination of grain size and size distribution (characterized by the linear intercept method).
Danish Standards Foundation, Particle size of general powder
- DS/EN ISO 10724-1:2001 Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 1: General principles and moulding of multipurpose test specimens
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Particle size of general powder
- ASHRAE GUIDELINE 26-2012 Guideline for Field Testing of General Ventilation Filtration Devices and Systems for Removal Efficiency In-Situ by Particle Size and Resistance to Airflow