ZH

RU

ES

Infrared standard film

Infrared standard film, Total:499 items.

In the international standard classification, Infrared standard film involves: Optics and optical measurements, Measurement of force, weight and pressure, General methods of tests and analysis for food products, Analytical chemistry, Thermodynamics and temperature measurements, Electric filters, Optoelectronics. Laser equipment, Domestic, commercial and industrial heating appliances, Components for aerospace construction, Optical equipment, Aerospace electric equipment and systems, On-board equipment and instruments, Petroleum products in general, Rubber and plastics products, Protection against crime, Products of the chemical industry, Insulating fluids, Protective equipment, Linear and angular measurements, Paints and varnishes, Rubber, Medical sciences and health care facilities in general, Fruits. Vegetables, Wind turbine systems and other alternative sources of energy, Pharmaceutics, Tea. Coffee. Cocoa, Farming and forestry, Lamps and related equipment, Raw materials for rubber and plastics, Elements of buildings, Bridge construction, Lubricants, industrial oils and related products, Electrical accessories, Environmental protection, Water quality, Food products in general, Fishing and fish breeding, Vocabularies, Organic chemicals, Fuels, Waxes, bituminous materials and other petroleum products, Construction industry, Products of non-ferrous metals, Spices and condiments. Food additives, Paint ingredients, Geology. Meteorology. Hydrology, Telecommunications in general, Semiconducting materials, Coatings and related processes used in aerospace industry, Plastics, Air quality, Construction materials, Inorganic chemicals, Meat, meat products and other animal produce, Photography, Glass, Sacks. Bags, Laboratory medicine, Terminology (principles and coordination), Cereals, pulses and derived products, Processes in the food industry, Microbiology, Equipment for petroleum and natural gas industries, Measurement of volume, mass, density, viscosity.


Group Standards of the People's Republic of China, Infrared standard film

National Metrological Technical Specifications of the People's Republic of China, Infrared standard film

  • JJF 1750-2019 Calibration Specification for Infrared Standard Filter
  • JJF 1429-2013 Calibration Specification for Infrared Mammary Gland Examining Equipments
  • JJF 1319-2011 Calibration Specification for Fourier Transform Infrared Spectrometers
  • JJF 1107-2003 Calibration Specification for Infrared Thermometers for Measurement of Human Temperature
  • JJF(纺织) 086-2019 Calibration Specification for Textile Far Infrared Emissivity Testers
  • JJF(纺织)086-2019 Calibration Specification for Textile Far Infrared Emissivity Testers

工业和信息化部, Infrared standard film

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Infrared standard film

  • GB/T 21005-2007 UV erythema reference action spectrum,standard erythema dose and UV index
  • GB/T 14143-1993 Infrared Absorption Measurement Method of Oxygen Content in the Gap of 300-900μm Silicon Wafer
  • GB/T 20150-2023 Erythema baseline action spectrum and standard erythema dose
  • GB/T 20150-2006 Erythema reference action spectrum and standard erythema dose
  • GB/T 15517.2-1995 The grade quality standards of steamed red ginseng
  • GB/T 26253-2010 Determination of water vapour transmission rate for plastics-film and sheeting.Infrared detection sensor method
  • GB 25534-2010 National Food Safety Standard Food Additive Red Silver Pink
  • GB/T 15517.1-1995 The grade quality standards of mould pressing steamed red ginseng
  • GB/T 7962.18-1987 Colourless optical glass test methods--Autocollimation test method for refractive index in the ultraviolet and infrared wave band
  • GB 16328-1996 Hygienic standard of roasted fish fillet
  • GB 19640-2005 Hygienic standard for breakfast cereal

American National Standards Institute (ANSI), Infrared standard film

Underwriters Laboratories (UL), Infrared standard film

Korean Agency for Technology and Standards (KATS), Infrared standard film

  • KS X 6916-2020 Intelligent transport systems — Conformity assessment in infrared DSRC standard for ITS applications
  • KS G ISO 4852:2021 Personal eye-protectors — Infra-red filters — Utilisation and transmittance requirements
  • KS G ISO 4852:2014 Personal eye-protectors — Infra-red filters — Utilisation and transmittance requirements
  • KS B ISO 11151-1:2013 Lasers and laser-related equipment ?; Standard optical components ?; Part 1: Components for the UV, visible and near-infrared spectral ranges
  • KS B ISO 11151-1:2003 Lasers and laser-related equipment-Standard optical components-Part 1:Components for the UV, visible and near-infrared spectral ranges
  • KS B ISO 11151-1:2015 Lasers and laser-related equipment ― Standard optical components ― Part 1: Components for the UV, visible and near-infrared spectral ranges
  • KS B ISO 11151-2:2003 Lasers and laser-related equipment-Standard optical components-Part 2:Components for the infrared spectral range
  • KS B ISO 11151-2:2013 Lasers and laser-related equipment ?; Standard optical components ?; Part 2: Components for the infrared spectral range
  • KS B ISO 11151-2:2015 Lasers and laser-related equipment ― Standard optical components ― Part 2: Components for the infrared spectral range
  • KS M 3923-1989(1999) PHOTOGRAPHIC SHEET FILMS FOR GENERAL USE
  • KS B ISO 11151-1-2015(2020) Lasers and laser-related equipment ― Standard optical components ― Part 1: Components for the UV, visible and near-infrared spectral ranges
  • KS B ISO 11151-2-2015(2020) Lasers and laser-related equipment ― Standard optical components ― Part 2: Components for the infrared spectral range
  • KS M ISO 15106-2:2008 Plastics-Film and sheeting-Determination of water vapour transmission rate-Part 2:Infrared detection sensor method

Yunnan Provincial Standard of the People's Republic of China, Infrared standard film

Military Standard of the People's Republic of China-General Armament Department, Infrared standard film

  • GJB 4531-2002 Monitor chemical standard infrared spectrum
  • GJB 486-1988 Model 1821 color infrared aerial photography negative film
  • GJB 485-1988 Type 1421 black and white infrared aerial photography film
  • GJB 1866-1994 Specification for mercury cadmium telluride wafers for infrared detectors
  • GJB 2052-1994 Specification for silicon wafers for infrared charge-coupled devices
  • GJB 2452-1995 Specification for cadmium telluride single crystal wafers for infrared detectors
  • GJB 1792-1993 Specification for Type 1822 Color Infrared Aerial Photographic Negative Films
  • GJB 1785-1993 Test method for mercury cadmium telluride wafers for infrared detectors
  • GJB 9925-2021 External field radiation calibration method of spaceborne infrared camera
  • GJB 5674.1-2006 Assessment criteria of jamming effectiveness for IR decoy flare.Part 1:Airborne IR decoy flare
  • GJB/J 3351-1998 Infrared target simulator calibration procedures
  • GJB 7957-2012 The measurement method for infrared characteristics of air targets
  • GJB 3965-2000 General specifications for targeting pod forward-looking infrared systems
  • GJB 6181A-2021 Test method for target and environmental infrared radiation characteristics
  • GJB 8703-2015 Calibration procedures for focal length measurement devices of infrared optical systems
  • GJB 4036-2000 Radiation calibration method for infrared channels of spaceborne remote sensing instruments
  • GJB 9759-2020 Calibration method of vehicle-mounted large-aperture infrared imaging measurement system
  • GJB 9723-2020 On-board radiation calibration method for spaceborne Earth observation infrared cameras
  • GJB 6635-2008 Measurement method for infrared radiation feature of target and background by means of airborne downward looking

American Society for Testing and Materials (ASTM), Infrared standard film

  • ASTM E2224-18 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
  • ASTM E1655-00 Standard Practices for Infrared Multivariate Quantitative Analysis
  • ASTM E1790-00 Standard Practice for Near Infrared Qualitative Analysis
  • ASTM E1790-04 Standard Practice for Near Infrared Qualitative Analysis
  • ASTM E1655-17 Standard Practices for Infrared Multivariate Quantitative Analysis
  • ASTM E2224-19 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
  • ASTM E1655-04 Standard Practices for Infrared Multivariate Quantitative Analysis
  • ASTM E1655-05 Standard Practices for Infrared Multivariate Quantitative Analysis
  • ASTM E1790-04(2016)e1 Standard Practice for Near Infrared Qualitative Analysis
  • ASTM E2582-07 Standard Practice for Infrared Flash Thermography of Composite Panels and Repair Patches Used in Aerospace Applications
  • ASTM E2582-07(2014) Standard Practice for Infrared Flash Thermography of Composite Panels and Repair Patches Used in Aerospace Applications
  • ASTM E334-96 Standard Practice for General Techniques of Infrared Microanalysis
  • ASTM E2758-22 Standard Guide for Selection and Use of Infrared Thermometers
  • ASTM E334-01(2021) Standard Practice for General Techniques of Infrared Microanalysis
  • ASTM E2758-15a Standard Guide for Selection and Use of Wideband, Low Temperature Infrared Thermometers
  • ASTM E1790-04(2010) Standard Practice for Near Infrared Qualitative Analysis
  • ASTM E2106-00(2011) Standard Practice for General Techniques of Liquid Chromatography-Infrared (LC/IR) and Size Exclusion Chromatography-Infrared (SEC/IR) Analyses
  • ASTM D3414-98(2011)e1 Standard Test Method for Comparison of Waterborne Petroleum Oils by Infrared Spectroscopy
  • ASTM F1249-94b Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
  • ASTM F1249-20 Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
  • ASTM E168-67(1977) Standard Recommended Practices for General Techniques Of Infrared Quantitative Analysis
  • ASTM D2357-11 Standard for Qualitative Classification of Surfactants by Infrared Absorption
  • ASTM E2937-18 Standard Guide for Using Infrared Spectroscopy in Forensic Paint Examinations
  • ASTM E168-16(2023) Standard Practices for General Techniques of Infrared Quantitative Analysis
  • ASTM E1655-05(2012) Standard Practices for Infrared Multivariate Quantitative Analysis
  • ASTM E2106-00(2019) Standard Practice for General Techniques of Liquid Chromatography-Infrared (LC/IR) and Size Exclusion Chromatography-Infrared (SEC/IR) Analyses
  • ASTM E1754-08 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
  • ASTM D3414-98 Standard Test Method for Comparison of Waterborne Petroleum Oils by Infrared Spectroscopy
  • ASTM D3414-98(2004) Standard Test Method for Comparison of Waterborne Petroleum Oils by Infrared Spectroscopy
  • ASTM D2357-74(1995)e1 Standard for Qualitative Classification of Surfactants by Infrared Absorption
  • ASTM D2357-74(2003) Standard for Qualitative Classification of Surfactants by Infrared Absorption
  • ASTM E334-01(2013) Standard Practice for General Techniques of Infrared Microanalysis
  • ASTM E1965-98(2023) Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature
  • ASTM E168-16 Standard Practices for General Techniques of Infrared Quantitative Analysis
  • ASTM E1965-98(2016) Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature
  • ASTM E2937-13 Standard Guide for Using Infrared Spectroscopy in Forensic Paint Examinations
  • ASTM D2357-11(2016) Standard for Qualitative Classification of Surfactants by Infrared Absorption
  • ASTM D3677-10 Standard Test Methods for Rubber--Identification by Infrared Spectrophotometry
  • ASTM E2847-21 Standard Test Method for  Calibration and Accuracy Verification of Wideband Infrared Thermometers
  • ASTM E2106-00 Standard Practice for General Techniques of Liquid Chromatography-Infrared (LC/IR) and Size Exclusion Chromatography-Infrared (SEC/IR) Analyses
  • ASTM E2106-00(2006) Standard Practice for General Techniques of Liquid Chromatography-Infrared (LC/IR) and Size Exclusion Chromatography-Infrared (SEC/IR) Analyses
  • ASTM F1249-06(2011) Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
  • ASTM E2847-13 Standard Practice for ?Calibration and Accuracy Verification of Wideband Infrared Thermometers
  • ASTM E2847-13e1 Standard Test Method for ? ?Calibration and Accuracy Verification of Wideband Infrared Thermometers
  • ASTM E2847-14 Standard Test Method for Calibration and Accuracy Verification of Wideband Infrared Thermometers
  • ASTM E2847-11 Standard Practice for 65279; 65279;Calibration and Accuracy Verification of Wideband Infrared Thermometers
  • ASTM D6122-99 Standard Practice for Validation of Multivariate Process Infrared Spectrophotometers
  • ASTM D6122-01 Standard Practice for Validation of Multivariate Process Infrared Spectrophotometers
  • ASTM E1642-00(2005) Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis
  • ASTM E168-99 Standard Practices for General Techniques of Infrared Quantitative Analysis
  • ASTM E334-01 Standard Practice for General Techniques of Infrared Microanalysis
  • ASTM D6122-09 Standard Practice for Validation of the Performance of Multivariate Process Infrared Spectrophotometers
  • ASTM E1642-00 Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis
  • ASTM E2224-10 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
  • ASTM E932-89(2002) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
  • ASTM E932-89(1997) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
  • ASTM E2758-15a(2021) Standard Guide for Selection and Use of Wideband, Low Temperature Infrared Thermometers
  • ASTM E168-06 Standard Practices for General Techniques of Infrared Quantitative Analysis
  • ASTM E3085-17 Standard Guide for Fourier Transform Infrared Spectroscopy in Forensic Tape Examinations
  • ASTM E932-89(2021) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
  • ASTM E932-89(2013) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
  • ASTM E2758-15 Standard Guide for Selection and Use of Wideband, Low Temperature Infrared Thermometers
  • ASTM E2758-10 Standard Guide for Selection and Use of Wideband, Low Temperature Infrared Thermometers
  • ASTM E334-01(2007) Standard Practice for General Techniques of Infrared Microanalysis
  • ASTM D3677-00(2004) Standard Test Methods for Rubber--Identification by Infrared Spectrophotometry
  • ASTM C1153-97 Standard Practice for Location of Wet Insulation in Roofing Systems Using Infrared Imaging
  • ASTM E1965-98 Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature
  • ASTM E1965-98(2003) Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature
  • ASTM D2702-05 Standard Practice for Rubber Chemicals-Determination of Infrared Absorption Characteristics
  • ASTM D2702-94(1998) Standard Practice for Rubber Chemicals-Determination of Infrared Absorption Characteristics
  • ASTM E2224-22 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
  • ASTM E2224-23 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
  • ASTM C1153-97(2003)e1 Standard Practice for Location of Wet Insulation in Roofing Systems Using Infrared Imaging
  • ASTM E1965-98(2009) Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature
  • ASTM E1642-00(2010) Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis
  • ASTM C1153-10 Standard Practice for Location of Wet Insulation in Roofing Systems Using Infrared Imaging
  • ASTM D3677-00 Standard Test Methods for Rubber--Identification by Infrared Spectrophotometry
  • ASTM E2224-23a Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
  • ASTM E1642-00(2016) Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis
  • ASTM F3238-17 Standard Specification for Design and Installation of an Infrared (IR) Searchlight System (USA)
  • ASTM D4788-03(2022) Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography
  • ASTM D2144-07(2021) Standard Practices for Examination of Electrical Insulating Oils by Infrared Absorption
  • ASTM F3238-17(2023) Standard Specification for Design and Installation of an Infrared (IR) Searchlight System (USA)
  • ASTM D2702-05(2021) Standard Practice for Rubber Chemicals—Determination of Infrared Absorption Characteristics
  • ASTM D3677-10(2019) Standard Test Methods for Rubber--Identification by Infrared Spectrophotometry
  • ASTM D3677-10(2015) Standard Test Methods for Rubber&x2014;Identification by Infrared Spectrophotometry
  • ASTM D7686-19 Standard Test Method for Field-Based Condition Monitoring of Soot in In-Service Lubricants Using a Fixed-Filter Infrared (IR) Instrument
  • ASTM E1791-96(2000) Standard Practice for Transfer Standards for Reflectance Factor for Near-Infrared Instruments Using Hemispherical Geometry
  • ASTM E1934-99a(2005)e1 Standard Guide for Examining Electrical and Mechanical Equipment with Infrared Thermography
  • ASTM D6122-06 Standard Practice for Validation of the Performance of Multivariate Process Infrared Spectrophotometers
  • ASTM D6122-06e1 Standard Practice for Validation of the Performance of Multivariate Process Infrared Spectrophotometers
  • ASTM E2224-02 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
  • ASTM D2144-94 Standard Test Methods for Examination of Electrical Insulating Oils by Infrared Absorption
  • ASTM D2144-01 Standard Test Methods for Examination of Electrical Insulating Oils by Infrared Absorption
  • ASTM D2144-01e1 Standard Test Methods for Examination of Electrical Insulating Oils by Infrared Absorption
  • ASTM E1934-99a Standard Guide for Examining Electrical and Mechanical Equipment with Infrared Thermography
  • ASTM E1934-99a(2014) Standard Guide for Examining Electrical and Mechanical Equipment with Infrared Thermography
  • ASTM E1934-99a(2018) Standard Guide for Examining Electrical and Mechanical Equipment with Infrared Thermography
  • ASTM D2702-05(2016) Standard Practice for Rubber Chemicals&x2014;Determination of Infrared Absorption Characteristics
  • ASTM E1252-98(2007) Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
  • ASTM E2224-23ae1 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
  • ASTM F1078-87(1998) Standard Terminology for Surgical Scissors-Inserted and Non-Inserted Blades
  • ASTM E1791-96(2008)e1 Standard Practice for Transfer Standards for Reflectance Factor for Near-Infrared Instruments Using Hemispherical Geometry
  • ASTM E932-89(2007) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
  • ASTM D2144-07 Standard Practices for Examination of Electrical Insulating Oils by Infrared Absorption
  • ASTM D4788-88(2001) Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography
  • ASTM D4788-03(2013) Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography
  • ASTM D2144-07(2013) Standard Practices for Examination of Electrical Insulating Oils by Infrared Absorption
  • ASTM D7575-11 Standard Test Method for Solvent-Free Membrane Recoverable Oil and Grease by Infrared Determination
  • ASTM F1078-87(2008)e1 Standard Terminology for Surgical Scissorsx2014;Inserted and Non-Inserted Blades
  • ASTM D772-86(2011) Standard Test Method for Evaluating Degree of Flaking (Scaling) of Exterior Paints
  • ASTM E2105-00(2005) Standard Practice for General Techniques of Thermogravimetric Analysis (TGA) Coupled With Infrared Analysis (TGA/IR)
  • ASTM E2105-00 Standard Practice for General Techniques of Thermogravimetric Analysis (TGA) Coupled With Infrared Analysis (TGA/IR)
  • ASTM D6805-02e1 Standard Practice for Infrared (IR) Procedure for Determination of Aromatic/Aliphatic Ratio of Bituminous Emulsions
  • ASTM D6805-02 Standard Practice for Infrared (IR) Procedure for Determination of Aromatic/ Aliphatic Ratio of Bituminous Emulsions
  • ASTM D4788-03 Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography
  • ASTM D4053-04(2009) Standard Test Method for Benzene in Motor and Aviation Gasoline by Infrared Spectroscopy
  • ASTM D3259-95(2001)e1 Standard Practice for Infrared Determination of the Temperature of Applied Coatings on Wood Products During the Curing Cycle
  • ASTM D6805-02(2008) Standard Practice for Infrared (IR) Procedure for Determination of Aromatic/Aliphatic Ratio of Bituminous Emulsions
  • ASTM E1934-99a(2010) Standard Guide for Examining Electrical and Mechanical Equipment with Infrared Thermography
  • ASTM E1933-14(2018) Standard Practice for Measuring and Compensating for Emissivity Using Infrared Imaging Radiometers
  • ASTM D7889-21 Standard Test Method for Field Determination of In-Service Fluid Properties Using IR Spectroscopy
  • ASTM E1933-99a(2010) Standard Test Methods for Measuring and Compensating for Emissivity Using Infrared Imaging Radiometers
  • ASTM D4053-04 Standard Test Method for Benzene in Motor and Aviation Gasoline by Infrared Spectroscopy
  • ASTM D2702-05(2011) Standard Practice for Rubber Chemicalsmdash;Determination of Infrared Absorption Characteristics
  • ASTM D788-16 Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds
  • ASTM E275-01 Standard Practice for Describing and Measuring Performance of Ultraviolet, Visible, and Near-Infrared Spectrophotometers
  • ASTM E275-93 Standard Practice for Describing and Measuring Performance of Ultraviolet, Visible, and Near-Infrared Spectrophotometers
  • ASTM B43-98e1 Standard Specification for Seamless Red Brass Pipe, Standard Sizes
  • ASTM B43-98 Standard Specification for Seamless Red Brass Pipe, Standard Sizes
  • ASTM B43-98(2004) Standard Specification for Seamless Red Brass Pipe, Standard Sizes
  • ASTM B43-09 Standard Specification for Seamless Red Brass Pipe, Standard Sizes
  • ASTM B43-15 Standard Specification for Seamless Red Brass Pipe, Standard Sizes
  • ASTM E1791-96(2021) Standard Practice for Transfer Standards for Reflectance Factor for Near-Infrared Instruments Using Hemispherical Geometry
  • ASTM E1791-96(2014) Standard Practice for Transfer Standards for Reflectance Factor for Near-Infrared Instruments Using Hemispherical Geometry
  • ASTM D83-84(2008)e1 Standard Specification for Red Lead Pigment
  • ASTM D83-84(1996)e1 Standard Specification for Red Lead Pigment
  • ASTM D83-84(2020) Standard Specification for Red Lead Pigment
  • ASTM E1862-14(2018) Standard Practice for Measuring and Compensating for Reflected Temperature Using Infrared Imaging Radiometers
  • ASTM D2124-99e1 Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique
  • ASTM E1754-95(2001)e1 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
  • ASTM E1754-95 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
  • ASTM E1252-98 Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
  • ASTM E1252-98(2002) Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
  • ASTM E1933-99a Standard Test Methods for Measuring and Compensating for Emissivity Using Infrared Imaging Radiometers
  • ASTM E1862-97e1 Standard Test Methods for Measuring and Compensating for Reflected Temperature Using Infrared Imaging Radiometers
  • ASTM E1862-97(2002)e1 Standard Test Methods for Measuring and Compensating for Reflected Temperature Using Infrared Imaging Radiometers
  • ASTM E1933-99a(2005)e1 Standard Test Methods for Measuring and Compensating for Emissivity Using Infrared Imaging Radiometers
  • ASTM D2124-99(2004) Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique
  • ASTM D2621-87(2011) Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints
  • ASTM F1188-00 Standard Test Method for Interstitial Atomic Oxygen Content of Silicon by Infrared Absorption
  • ASTM D2124-99(2011) Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique
  • ASTM E1862-14(2022) Standard Practice for Measuring and Compensating for Reflected Temperature Using Infrared Imaging Radiometers
  • ASTM E1252-98(2021) Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
  • ASTM E1933-14(2022) Standard Practice for Measuring and Compensating for Emissivity Using Infrared Imaging Radiometers
  • ASTM E1933-14 Standard Practice for Measuring and Compensating for Emissivity Using Infrared Imaging Radiometers
  • ASTM E2105-00(2016) Standard Practice for General Techniques of Thermogravimetric Analysis (TGA) Coupled With Infrared Analysis (TGA/IR)
  • ASTM F1864-21 Standard Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings
  • ASTM E1252-98(2013)e1 Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
  • ASTM F1864-16 Standard Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings
  • ASTM F1864-05 Standard Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings
  • ASTM C1153-10(2015) Standard Practice for Location of Wet Insulation in Roofing Systems Using Infrared Imaging
  • ASTM F1619-95(2000) Standard Test Method for Measurement of Interstitial Oxygen Content of Silicon Wafers by Infrared Absorption Spectroscopy with p-Polarized Radiation Incident at the Brewster Angle
  • ASTM F1078-10(2018) Standard Terminology for Surgical Scissors—Inserted and Non-Inserted Blades
  • ASTM D2621-87(2005) Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints
  • ASTM F1864-98 Standard Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings
  • ASTM E1862-97(2010) Standard Test Methods for Measuring and Compensating for Reflected Temperature Using Infrared Imaging Radiometers
  • ASTM E1862-14 Standard Practice for Measuring and Compensating for Reflected Temperature Using Infrared Imaging Radiometers
  • ASTM F3416-21 Standard Guide for Using Fourier Transform Infrared Spectrometry to Evaluate Synthetic Equine Surface Components
  • ASTM D6805-02(2023) Standard Practice for Infrared (IR) Procedure for Determination of Aromatic/ Aliphatic Ratio of Bituminous Emulsions
  • ASTM B41-91 Standard Specification for Seamless Red Brass Pipe, Standard Sizes
  • ASTM B43-20 Standard Specification for Seamless Red Brass Pipe, Standard Sizes
  • ASTM B43-14 Standard Specification for Seamless Red Brass Pipe, Standard Sizes
  • ASTM D3259-95 Standard Practice for Infrared Determination of the Temperature of Applied Coatings on Wood Products During the Curing Cycle
  • ASTM E2050-99 Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion-Infrared Absorption Method
  • ASTM D2702-04 Standard Practice for Rubber Chemicals-Determination of Infrared Absorption Characteristics
  • ASTM E2050-99(2004) Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion-Infrared Absorption Method
  • ASTM D2621-87(2000) Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints
  • ASTM E1786-96 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
  • ASTM E1786-02 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
  • ASTM E1786-08 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
  • ASTM D7575-10e1 Standard Test Method for Solvent-Free Membrane Recoverable Oil and Grease by Infrared Determination
  • ASTM D2621-87(1995)e1 Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints
  • ASTM E1754-17 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
  • ASTM E1897-14(2018) Standard Practice for Measuring and Compensating for Transmittance of an Attenuating Medium Using Infrared Imaging Radiometers
  • ASTM D6645-01(2010) Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
  • ASTM E1754-17a Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
  • ASTM E1982-98(2021) Standard Practice for Open-Path Fourier Transform Infrared (OP/FT-IR) Monitoring of Gases and Vapors in Air
  • ASTM E2050-12 Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion-Infrared Absorption Spectrometry
  • ASTM F1864-05(2010) Standard Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings
  • ASTM D7172-14 Standard Test Method for Determining the Relative Density 40;Specific Gravity41; and Absorption of Fine Aggregates Using Infrared
  • ASTM D6805-02(2016) Standard Practice for Infrared (IR) Procedure for Determination of Aromatic/ Aliphatic Ratio of Bituminous Emulsions
  • ASTM D3162-21 Standard Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry)
  • ASTM D2621-87(2016) Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints
  • ASTM D7573-09 Standard Test Method for Total Carbon and Organic Carbon in Water by High Temperature Catalytic Combustion and Infrared Detection
  • ASTM C1153-23 Standard Practice for Location of Wet Insulation in Roofing Systems Using Infrared Imaging
  • ASTM D4839-03(2017) Standard Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxidation, or Both, and Infrared Detection
  • ASTM D3124-98(2003) Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
  • ASTM D7172-06e1 Standard Test Method for Determining The Relative Density (Specific Gravity) And Absorption Of Fine Aggregates Using Infrared
  • ASTM E1982-98 Standard Practice for Open-Path Fourier Transform Infrared (OP/FT-IR) Monitoring of Gases and Vapors in Air
  • ASTM E1982-98(2002) Standard Practice for Open-Path Fourier Transform Infrared (OP/FT-IR) Monitoring of Gases and Vapors in Air
  • ASTM D6248-98 Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
  • ASTM E1865-97(2007) Standard Guide for Open-Path Fourier Transform Infrared (OP/FT-IR) Monitoring of Gases and Vapors in Air
  • ASTM D7575-10 Standard Test Method for Solvent-Free Membrane Recoverable Oil and Grease by Infrared Determination
  • ASTM D3124-98 Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
  • ASTM E1897-14(2022) Standard Practice for Measuring and Compensating for Transmittance of an Attenuating Medium Using Infrared Imaging Radiometers
  • ASTM E1897-97(2010) Standard Test Methods for Measuring and Compensating for Transmittance of an Attenuating Medium Using Infrared Imaging Radiometers
  • ASTM D6248-98(2004) Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
  • ASTM D7575-11(2017) Standard Test Method for Solvent-Free Membrane Recoverable Oil and Grease by Infrared Determination
  • ASTM D6342-12(2017)e1 Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy
  • ASTM D3124-98(2019) Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
  • ASTM C1842-16 Standard Test Method for The Analysis of Boron and Silicon in Uranium Hexfluoride via Fourier-Transform Infrared (FTIR) Spectroscopy
  • ASTM F1078-87(2008) Standard Terminology for Surgical ScissorsInserted and Non-Inserted Blades
  • ASTM F1078-10(2011) Standard Terminology for Surgical ScissorsInserted and Non-Inserted Blades
  • ASTM D5898-96(2005) Standard Guide for Standard Details for Adhered Sheet Waterproofing
  • ASTM D49-83(1996)e1 Standard Test Methods of Chemical Analysis of Red Lead
  • ASTM E1045-00(2005) Standard Specification for Pipet, Sahli Hemoglobin
  • ASTM E1045-85(1996) Standard Specification for Pipet, Sahli Hemoglobin
  • ASTM E1045-00 Standard Specification for Pipet, Sahli Hemoglobin
  • ASTM E1045-00(2022) Standard Specification for Pipet, Sahli Hemoglobin
  • ASTM D49-83(2020) Standard Test Methods of Chemical Analysis of Red Lead
  • ASTM E1045-00(2016) Standard Specification for Pipet, Sahli Hemoglobin
  • ASTM D3162-12(2020) Standard Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry)
  • ASTM E1915-05 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared Absorption Spectrometry
  • ASTM D6277-01 Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
  • ASTM D6277-99 Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
  • ASTM D7172-06 Standard Test Method for Determining The Relative Density (Specific Gravity) And Absorption Of Fine Aggregates Using Infrared
  • ASTM E1897-97 Standard Test Methods for Measuring and Compensating for Transmittance of an Attenuating Medium Using Infrared Imaging Radiometers
  • ASTM E1897-97(2002)e1 Standard Test Methods for Measuring and Compensating for Transmittance of an Attenuating Medium Using Infrared Imaging Radiometers
  • ASTM E1915-99 Standard Test Method for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared Absorption Spectrometry
  • ASTM E1915-01 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared Absorption Spectrometry
  • ASTM D6277-01(2006) Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
  • ASTM E1786-17 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
  • ASTM E1786-17a Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
  • ASTM E1865-97(2021) Standard Guide for Open-Path Fourier Transform Infrared (OP/FT-IR) Monitoring of Gases and Vapors in Air
  • ASTM D6277-07(2017) Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
  • ASTM D5670-95(2009) Standard Test Method for Rubber-Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry
  • ASTM D1669/D1669M-07(2013)e1 Standard Practice for Preparation of Test Panels for Accelerated and Outdoor Weathering of Bituminous Coatings
  • ASTM E284-03 Standard Terminology of Appearance
  • ASTM E284-00 Standard Terminology of Appearance
  • ASTM E284-05a Standard Terminology of Appearance
  • ASTM E284-22 Standard Terminology of Appearance
  • ASTM E1865-97(2013) Standard Guide for Open-Path Fourier Transform Infrared (OP/FT-IR) Monitoring of Gases and Vapors in Air
  • ASTM E1915-07a Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared-Absorption Spectrometry

Shanghai Provincial Standard of the People's Republic of China, Infrared standard film

U.S. Military Regulations and Norms, Infrared standard film

Professional Standard - Electron, Infrared standard film

  • SJ 20437-1994 Specification for lead tin telluride slice for use in infrared detector
  • SJ 20640-1997 Specification for indium antimonide single crystal slices for use in infrared detector
  • SJ 20438-1994 Methods for measurement of lead tin telluride slice for use in infrared detector

Professional Standard - Aerospace, Infrared standard film

  • QJ 1697-1989 General Specifications for Infrared Interference Filters
  • QJ 2942-1997 Verification Regulations for Infrared Target Simulator
  • QJ 3158-2002 General specification for infrared localizer on ground and warship

SAE - SAE International, Infrared standard film

Standard Association of Australia (SAA), Infrared standard film

HU-MSZT, Infrared standard film

Society of Automotive Engineers (SAE), Infrared standard film

TH-TISI, Infrared standard film

Association Francaise de Normalisation, Infrared standard film

  • NF C48-226:1987 Intrusion detection - Active infra-red detectors - Specific standard.
  • NF C48-231:1988 Intrusion detection - Motion detectors,passive infrared - Specific standard
  • NF X91-001:2000 Erythema reference action spectrum and standard erythema dose.
  • NF S10-111-1:2001 Laser and laser-related equipment - Standard optical components - Part 1 : components for the UV, visible and near-infrared spectral ranges.
  • NF S10-111-1*NF EN ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1 : components for the UV, visible and near-infrared spectral ranges
  • NF S10-111-2:2001 Lasers and laser-related equipment - Standard optical components - Part 2 : components for the infrared spectral range.
  • NF S10-111-2*NF EN ISO 11151-2:2015 Lasers and laser-related equipment - Standard optical components - Part 2 : components for the infrared spectral range
  • NF EN ISO 11151-1:2015 Lasers et équipements associés aux lasers - Composants optiques standards - Partie 1 : composants pour les plages spectrales UV, visible et proche de l'infrarouge
  • NF X43-065*NF EN 14626:2012 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
  • NF EN 14626:2012 Air ambiant - Méthode normalisée de mesurage de la concentration en monoxyde de carbone par spectroscopie à rayonnement infrarouge non dispersif
  • NF T54-142-2*NF EN ISO 15106-2:2005 Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 2 : infrared detection sensor method

IPC - Association Connecting Electronics Industries, Infrared standard film

KR-KS, Infrared standard film

  • KS G ISO 4852-2021 Personal eye-protectors — Infra-red filters — Utilisation and transmittance requirements

Professional Standard - Aviation, Infrared standard film

  • HB 5490-1991 Standard Spectrum Atlas of Infrared Spectrum of Aeronautical Non-metallic Materials Commodities

International Organization for Standardization (ISO), Infrared standard film

  • ISO 17166:1999 Erythema reference action spectrum and standard erythema dose
  • ISO/CIE 17166:2019 Erythema reference action spectrum and standard erythema dose
  • ISO/CIE 17166:1999 Erythema reference cation spectrum and standard erythema dose
  • ISO 11151-1:2000 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges
  • ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges
  • ISO 11151-2:2000 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range
  • ISO 11151-2:2015 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range
  • ISO 15106-2:2003 Plastics; Film and sheeting - Determination of water vapour transmission rate - Part 2: Infrared detection sensor method

IX-FAO, Infrared standard film

国家市场监督管理总局、中国国家标准化管理委员会, Infrared standard film

  • GB/T 37431-2019 Wind turbines—Guide for infrared detection of rotor blade
  • GB/T 37396.1-2019 Lasers and laser-related equipment—Standard optical components—Part 1: Components for the UV,visible and near-infrared spectral ranges

CZ-CSN, Infrared standard film

AT-ON, Infrared standard film

  • ONORM EN 171-1993 Personal eye-protection — Infrared filters — Transmittance requirements and recommended use

Professional Standard - Hygiene , Infrared standard film

PK-PSQCA, Infrared standard film

  • PS 87-1960 PAKISTAN STANDARD SPECIFICATION FOR INK POWDERS AND TABLETS BLUE-BLACK AND RED

Professional Standard - Agriculture, Infrared standard film

Danish Standards Foundation, Infrared standard film

  • DS/EN 171:2002 Personal eye-protection - Infrared filters - Transmittance requirements and recommended use
  • DS/EN 14626:2012 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
  • DS/EN ISO 11151-1:2000 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges
  • DS/EN ISO 15106-2:2005 Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 2: Infrared detection sensor method
  • DS/EN ISO 11151-2:2000 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range

Lithuanian Standards Office , Infrared standard film

  • LST EN 171-2002 Personal eye-protection - Infrared filters - Transmittance requirements and recommended use
  • LST EN 14626-2012 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy

AENOR, Infrared standard film

  • UNE-EN 171:2002 Personal eye-protection - Infrared filters - Transmittance requirements and recommended use.
  • UNE-EN 14626:2013 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy

Association of German Mechanical Engineers, Infrared standard film

  • VDI 3793 Blatt 1-1990 On-site determination of vegetational injuries; method of aerial photography with color infrared film

German Institute for Standardization, Infrared standard film

  • DIN EN 171:2002-08 Personal eye protection - Infrared filters - Transmittance requirements and recommended use; German version EN 171:2002
  • DIN EN 14626:2022-11 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy; German and English version prEN 14626:2022 / Note: Date of issue 2022-09-30*Intended as replacement for DIN EN 14626 (201...
  • DIN EN 14626:2012-12 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy; German version EN 14626:2012 / Note: To be replaced by DIN EN 14626 (2022-11).
  • DIN EN ISO 11151-2:2000 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range (ISO 11151-2:2000); German version EN ISO 11151-2:2000
  • DIN 45550:1976 Record-sleeves; outer- and inner-sleeves, dimensions and inscription
  • DIN EN ISO 11151-1:2000 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the ultraviolet, visible and near-infrared spectral range (ISO 11151-1:2000); German version EN ISO 11151-1:2000
  • DIN EN ISO 11151-1:2015-12 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2015); German version EN ISO 11151-1:2015
  • DIN EN ISO 15106-2:2005 Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 2: Infrared detection sensor method (ISO 15106-2:2003); German version EN ISO 15106-2:2005

未注明发布机构, Infrared standard film

Xinjiang Provincial Standard of the People's Republic of China, Infrared standard film

International Commission on Illumination (CIE), Infrared standard film

  • CIE 125-1997 Standard Erythema Dose a Review
  • CIE S 007/E-1998 Erythema Reference Action Spectrum and Standard Erythema Dose (ISO 17166: 1999)

Guizhou Provincial Standard of the People's Republic of China, Infrared standard film

Fujian Provincial Standard of the People's Republic of China, Infrared standard film

Canadian Standards Association (CSA), Infrared standard film

  • CSA/AM CSA/ANSI Z83.19A-2002-2002 Addenda to the First Edition of ANSI Z83.19-2001 CSA 2.35-2001 AMERICAN NATIONAL STANDARD/CSA STANDARD FOR GAS-FIRED HIGH-INTENSITY INFRARED HEATERS

British Standards Institution (BSI), Infrared standard film

  • BS ISO 17166:2000 Erythema reference action spectrum and standard erythema dose
  • BS EN ISO 15106-2:2005 Plastics - Film and sheeting - Determination of water vapour transmission rate - Infrared detection sensor method
  • BS EN ISO 11151-2:2000 Lasers and laser-related equipment. Standard optical components. Components for the infrared spectral range
  • BS EN ISO 11151-2:2015 Lasers and laser-related equipment. Standard optical components. Components for the infrared spectral range
  • BS ISO/CIE 17166:2019 Tracked Changes. Erythema reference action spectrum and standard erythema dose
  • BS EN ISO 11151-1:2000 Lasers and laser-related equipment. Standard optical components. Components for the UV, visible and near-infrared spectral ranges
  • BS EN ISO 11151-1:2015 Lasers and laser-related equipment. Standard optical components. Components for the UV, visible and near-infrared spectral ranges
  • BS EN 14626:2012 Ambient air. Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
  • BS 3985:2003 Haemiglobincyanide (cyanmethaemoglobin) preparation as a standard for spectrometric haemoglobinometry
  • BS EN 14626:2005 Ambient air quality - Standard method for the measurement of the concentration of carbon monoxide by nondispersive infrared spectroscopy

Hebei Provincial Standard of the People's Republic of China, Infrared standard film

  • DB13/T 2953-2019 Determination of styrene content in styrene-butadiene rubber by infrared spectroscopic external standard method
  • DB1307/T 092-2005 Comprehensive Standards for the Production of High Quality Golden Red Apples

National Health Commission of the People's Republic of China, Infrared standard film

  • GB 1886.181-2016 National Food Safety Standard Food Additive Monascus Red
  • GB 1886.17-2015 National Food Safety Standard Food Additive Lac Red (also known as Shellac Red)

中国气象局, Infrared standard film

  • QX/T 545-2020 Calibration method of infrared radiation of Fengyun series polar-orbiting meteorological satellite visible light infrared scanning radiometer on-orbiting satellite
  • QX/T 388-2017 Technical specifications for cross-calibration of infrared bands for geostationary meteorological satellites

Electronic Components, Assemblies and Materials Association, Infrared standard film

  • ECA EIA-448-21A-2000 Test Standard for Electromechanical Components - Environmental Effects of Machine Soldering Using an Infrared System

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Infrared standard film

  • GJB/J 6220-2008 Calibration specification for IR optical focal length measuring equipment

Professional Standard - Urban Construction, Infrared standard film

  • CJ 26.29-1991 Municipal sewage water quality inspection method standard Determination of total organic carbon non-dispersive infrared method

KE-KEBS, Infrared standard film

NZ-SNZ, Infrared standard film

ECIA - Electronic Components Industry Association, Infrared standard film

  • EIA-448-21A-2000 Test Standard for Electromechanical Components - Environmental Effects of Machine Soldering Using an Infrared System
  • EIA-448-21-1989 Method 21 Test Standard for Electromechanical Switches: Environmental Effects of Machine Soldering Using an Infrared System

Institute of Electrical and Electronics Engineers (IEEE), Infrared standard film

  • ISO/IEEE 11073-30300:2004(E) ISO/IEEE International Standard Health informatics - Point-of-care medical device communication - Transport profile - Infrared
  • IEEE/ISO 11073-30300-2004 ISO/IEEE International Standard Health informatics - Point-of-care medical device communication - Transport profile - Infrared
  • IEEE Std 338-2012 IEEE Standard for Criteria for the Periodic Surveillance Testing of Nuclear Power Generating Station Safety - Redline

2005/01/25, Infrared standard film

2001/11/01, Infrared standard film

Cooling Technology Institute, Infrared standard film

  • CTI STD-103-1994 Standard Specifications for the Design of Cooling Towers with Redwood Lumber
  • CTI STD-103-2014 Standard Specifications For the Design of Cooling Towers With Redwood Lumber

Guangxi Provincial Food Standard of the People's Republic of China, Infrared standard film

European Committee for Standardization (CEN), Infrared standard film

  • EN 14626:2012 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
  • EN ISO 11151-2:2000 Lasers and Laser-Related Equipment - Standard Optical Components - Part 2: Components for the Infrared Spectral Range ISO 11151-2: 2000
  • EN ISO 11151-1:2000 Lasers and Laser-Related Equipment - Standard Optical Components - Part 1: Components for the UV, Visible and Near-Infrared Spectral Ranges ISO 11151-1: 2000
  • EN 14626:2005 Ambient air quality - Standard method for the measurement of the concentration of carbon monoxide by nondispersive infrared spectroscopy
  • EN 15058:2017 Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: non-dispersive infrared spectrometry

Electronic Components, Assemblies and Materials Association, Infrared standard film

  • ECA EIA-448-21-1989 Method 21 Test Standard for Electromechanical Switches: Environmental Effects of Machine Soldering Using an Infrared System
  • ECA 448-21-1989 Method 21 Test Standard for Electromechanical Switches: Environmental Effects of Machine Soldering Using an Infrared System

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Infrared standard film

  • GB/T 35927-2018 Standard practice for identification of polymer layers or inclusions by fourier transform infrared microspectroscopy

ES-UNE, Infrared standard film

  • UNE-EN ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2015)

Fujian Provincial Food Standard of the People's Republic of China, Infrared standard film

Shanxi Provincial Standard of the People's Republic of China, Infrared standard film

  • DB14/T 2582-2022 "Shanxi Standard" (identification) evaluation technical specification red kidney beans

Anhui Provincial Standard of the People's Republic of China, Infrared standard film

  • DB34/T 2561-2015 Near-infrared method for rapid determination of routine indicators of solid-state fermented grains
  • DB34/T 3561-2019 Near-infrared method for rapid determination of conventional indicators of brewing raw materials

U.S. Air Force, Infrared standard film

US-AAMA, Infrared standard film

  • AAMA 2410-2013 Standard Practice foe Installation of Windows with an Exterir Flush Fin Over and Existing Window Frame

国家能源局, Infrared standard film

  • SY/T 6679.4-2016 Comprehensive logging tool calibration method Part 4: Infrared gas analyzer




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved