ZH
RU
ES
National Laboratory Evaluation
National Laboratory Evaluation, Total:50 items.
In the international standard classification, National Laboratory Evaluation involves: Thermodynamics and temperature measurements, Metrology and measurement in general, Electricity. Magnetism. Electrical and magnetic measurements, Acoustics and acoustic measurements, Optics and optical measurements, Linear and angular measurements, Environmental protection, Protection of and in buildings, Analytical chemistry, Ventilators. Fans. Air-conditioners, Audio, video and audiovisual engineering.
RU-GOST R, National Laboratory Evaluation
- GOST R 8.928-2016 State system for ensuring the uniformity of measurements. Expert evaluation of test results obtained from different laboratories
- GOST R 8.709-2010 State system for ensuring the uniformity of measurements. The laboratory conductometers of liquid. Methods of verification
- GOST R 8.692-2009 State system for ensuring the uniformity of measurements. Requirements for the competence of providers of proficiency testing for test laboratories by interlaboratory comparisons
- GOST R 8.729-2010 State system for ensuring the uniformity of measurements. Analytical gas laboratory chromatographs. Verification procedure
- GOST 8.298-2013 State system for ensuring the uniformity of measurements. Photoelectrical laboratory colorimeters. Verification procedure
- GOST 8.292-2013 State system for ensuring the uniformity of measurements. Laboratory conductometers of liquid. Verification procedure
- GOST 8.485-2013 State system for ensuring the uniformity of measurements. Analytical gas laboratory chromatographs. Verification procedure
- GOST R 8.772-2011 State system for ensuring the uniformity of measurements. Analytical liquid laboratory chromatographs. The method of verification
- GOST 8.485-1983 State system for ensuring the uniformity of measurements. Analitical gas laboratory chromatographs. Methods and means of verification
- GOST R 8.690-2009 State system for ensuring the uniformity of measurements. Use of proficiency testing by interlaboratory comparisons for accreditation in testing
- GOST 8.624-2013 State system for ensuring the traceability of measurements. Laboratory water in crude oil analyzers. Verification method
- GOST 8.298-1978 State system ensuring the uniformity of measurements. Photoelectrical laboratory colorimeters. Methods and means of calibration
- GOST 8.616-2013 State system for ensuring the uniformity of measurements. Laboratory and stream chromatographs for control of component composition Liquefied hydrocarbon fuel gases. The method of verification
- GOST R IEC 61094-2-2001 State system for ensuring the uniformity of measurements. Measurement microphones. Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique
- GOST R IEC 61094-3-2001 State system for ensuring the uniformity of measurements. Measurement microphones. Primary method for free-field calibration of laboratory standard microphones by the reciprocity technique
- GOST R 8.751-2011 State system for ensuring the uniformity of measurements. Measurement microphones. Part 7. Values for difference between free-field and pressure sensitivity levels of laboratory standard microphones
American National Standards Institute （ANSI), National Laboratory Evaluation
- ANSI/AMCA 500-L-2015 Laboratory Methods of Testing Louvers for Rating
- ANSI/ASA S1.15-2-2021 AMERICAN NATIONAL STANDARD Electroacoustics - Measurement microphones - Part 1: Specifications for laboratory standard microphones
- ANSI/AMCA 230-2015 Laboratory Methods of Testing Air Circulating Fans for Rating and Certification
- ANSI/ASA S1.15-2-2005 American National Standard Measurement Microphones - Part 2: Primary Method for Pressure Calibration of Laboratory Standard Microphones by the Reciprocity Technique
- ANSI/ASA S1.15-3-2021 American National Standard Electroacoustics - Measurement microphones - Part 3: Primary method for free-field calibration of laboratory standard microphones by the reciprocity technique
- ANSI/ASA S1.15-7-2021 American National Standard Electroacoustics - Measurement microphones - Part 7: Values for the difference between free field and pressure sensitivity levels of laboratory standard microphones
Society of Automotive Engineers (SAE), National Laboratory Evaluation
- SAE AS7109/5-1995 National Aerospace and Defense Contractors Accreditation Program - Requirements for Coating Evaluation Laboratory Practices
- SAE AS7101B-2002 NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM (NADCAP) GENERAL REQUIREMENTS FOR MATERIALS TEST LABORATORY ACCREDITATION PROGRAM
IEEE - The Institute of Electrical and Electronics Engineers@ Inc., National Laboratory Evaluation
- IEEE N42.23-1996 American National Standard Measurement and Associated Instrument Quality Assurance for Radioassay Laboratories
German Institute for Standardization, National Laboratory Evaluation
- DIN ISO 20189:2020-12 Acoustics - Screens, furniture and single objects intended for interior use - Rating of sound absorption and sound reduction of elements based on laboratory measurements (ISO 20189:2018)
- DIN ISO 20189:2020 Acoustics - Screens, furniture and single objects intended for interior use - Rating of sound absorption and sound reduction of elements based on laboratory measurements (ISO 20189:2018)
UNKNOWN, National Laboratory Evaluation
Acoustical Society of America (ASA), National Laboratory Evaluation
- ASA S1.15 PART 1-2021 AMERICAN NATIONAL STANDARD Electroacoustics - Measurement microphones - Part 1: Specifications for laboratory standard microphones
- ASA S1.15 PART 2-2021 AMERICAN NATIONAL STANDARD Electroacoustics - Measurement microphones - Part 2: Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique
- ASA S12.53 PART 2-1999 American National Standard Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms
Group Standards of the People's Republic of China, National Laboratory Evaluation
- T/AHEMA 7-2021 Classification and accreditation for staff of laboratory analysis of ecological environmental monitoring body
British Standards Institution (BSI), National Laboratory Evaluation
- BS ISO 20189:2018 Acoustics. Screens, furniture and single objects intended for interior use. Rating of sound absorption and sound reduction of elements based on laboratory measurements
- BS ISO 27327-1:2010 Fans. Air curtain units. Laboratory methods of testing for aerodynamic performance rating
- BS ISO 27327-1:2009 Fans - Air curtain units - Laboratory methods of testing for aerodynamic performance rating
International Organization for Standardization (ISO), National Laboratory Evaluation
- ISO 23351-1:2020 Acoustics — Measurement of speech level reduction of furniture ensembles and enclosures — Part 1: Laboratory method
- ISO 27327-1:2009 Fans - Air curtain units - Part 1: Laboratory methods of testing for aerodynamic performance rating
- ISO 20189:2018 Acoustics — Screens, furniture and single objects intended for interior use — Rating of sound absorption and sound reduction of elements based on laboratory measurements
SAE - SAE International, National Laboratory Evaluation
- SAE AS7101A-1997 National Aerospace and Defense Contractors Accreditation Program (NADCAP) General Requirements for Materials Testing Laboratory Accreditation Program
- SAE AS7101-1993 National Aerospace and Defense Contractors Accreditation Program (NADCAP); General Requirements for Materials Test Laboratory Accreditation Program
- SAE AS7101C-2007 NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM (NADCAP) GENERAL REQUIREMENTS FOR MATERIALS TEST LABORATORY ACCREDITATION PROGRAM
AENOR, National Laboratory Evaluation
- UNE 100710:1992 AIR DISTRIBUTION AND AIR DIFFUSION. LABORATORY AERODYNAMIC TESTING AND RATING OF AIR TERMINAL DEVICES.
Underwriters Laboratories (UL), National Laboratory Evaluation
- UL 61010-1 (ND)-2012 National Differences For UL 61010-1 Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 1: General Requirements (Edition 3; Reprint with revisions through and including July 15, 2015)
- UL 61010-2-030 (ND)-2012 National Differences For Safety requirements for electrical equipment for measurement@ control@ and laboratory use �C Part 2-030: Particular requirements for testing and measuring circuits (First Edition; Reprint with revisions through and including Septe
- UL 61010-2-030 (ND)-2018 National Differences For Requirements for Electrical Equipment for Measurement@ Control@ and Laboratory Use – Part 2-030: Particular Requirements for Equipment Having Testing or Measuring Circuits (Second Edition)
- UL 61010-2-201 (ND)-2018 National Differences For UL 61010-2-201 Safety Requirements for Electrical Equipment for Measurement@ Control@ and Laboratory Use – Part 2-201: Particular Requirements for Control Equipment (Second Edition)
- UL 61010B-2-031 (ND)-2003 National Differences For UL 61010B-2-031 Electrical Equipment for Measurement@ Control@ and Laboratory Use; Part 2: Particular Requirements for Hand-Held Probe Assemblies for Electrical Measurement and Test (First Edition)
- UL 61010B-2-032 (ND)-2003 National Differences For UL 61010B-2-032 Electrical Equipment for Measurement@ Control@ and Laboratory Use; Part 2: Particular Requirements for Hand-Held Current Clamps for Electrical Measurement and Test (First Edition)
GOSTR, National Laboratory Evaluation
- GOST R IEC 61094-2-2011 State system for ensuring the uniformity of measurements. Measurement microphones. Part 2. Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique
未注明发布机构, National Laboratory Evaluation
- BS 4773-1.1:1991(1999) Methods for Testing and rating air terminal devices for air distribution systems — Part 1 : Aerodynamic testing — Section 1.1 Testing under laboratory conditions