ZH
RU
ES
metal shear test
metal shear test, Total:365 items.
In the international standard classification, metal shear test involves: Testing of metals, Adhesives, Coatings and related processes used in aerospace industry, Fasteners, Elements of buildings, Surface treatment and coating, Semi-manufactures of timber, Welding, brazing and soldering, Petroleum, petroleum products and natural gas handling equipment, Semiconductor devices, Products of non-ferrous metals, Wood, sawlogs and sawn timber, Pipeline components and pipelines, Paints and varnishes, Iron and steel products, Fasteners for aerospace construction, Materials for aerospace construction, Road vehicle systems, Medical equipment, Soil quality. Pedology, Test conditions and procedures in general, Non-ferrous metals, Plastics, Mechanical testing, Ceramics, Road vehicles in general, Seals, glands, Machine tools, Construction industry, Powder metallurgy, Structures of buildings, Dentistry, Reinforced plastics, Bearings, Paint ingredients, Lubricants, industrial oils and related products, Corrosion of metals, Jewellery, Air quality, Woodworking equipment, Paint coating processes, Components for aerospace construction, Linear and angular measurements, Insulating materials, Wood-based panels, Environmental testing, Protection against fire, Installations in buildings, Aerospace electric equipment and systems, Shipbuilding and marine structures in general, Rubber and plastics products.
RO-ASRO, metal shear test
- STAS 7926-1967
- STAS 7927-1967
- STAS 10897/2-1983 Tests of metals MECANICAL TESTING OF SOLDERED AND BRAZED JOINTS Sheartesting
- STAS 7932/1-1990 MECHANICAL TESTS OF SPOT PROJECTION AND SEAM WELDED JOINTS OF METALS Tension shear tests
- STAS 10897/1-1983 Tests of metals MECHANICAL TESTING OF BRAZED JOINTS Tensile testing
- STAS 8728/3-1979 POLYVINYL ACETATE AQUEOUS DISPERSIONS Test methods Determination of resistance to splitting by shearing
- STAS 10026-1975 Tests of mi'lols U-and V-notch impact test dEtErmination of crystal liNILLY And fibrostty of FRAGIIRE
German Institute for Standardization, metal shear test
- DIN 50141:1982 Testing of metals; Shear test
- DIN 54452:1981 Testing of adhesives for metals and adhesively bonded metal joints; compression shear test
- DIN 50162:1978-09 Testing of clad steels; determination of shear strength between cladding metal and parent metal in shear test
- DIN 50162:1978 Testing of clad steels; determination of shear strength between cladding metal and parent metal in shear test
- DIN 54455:2016-09 Testing of adhesives for metals and of bonded metal joints - Torsional shear test
- DIN EN 2830:1993 Aerospace series; adhesion test for metallic coatings by shearing action; german version EN 2830:1993
- DIN EN 2243-6:2006 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 6: Determination of shear stress and shear strain; German and English version EN 2243-6:2005
- DIN 54455:2016 Testing of adhesives for metals and of bonded metal joints - Torsional shear test
- DIN 54455:1984 Testing of adhesives for metals and of bonded metal joints; torsional shear test
- DIN EN 2243-6:2006-07 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 6: Determination of shear stress and shear strain; German and English version EN 2243-6:2005
- DIN 50125:2004 Testing of metallic materials - Tensile test pieces
- DIN 50125:2016 Testing of metallic materials - Tensile test pieces
- DIN 50125:2009 Testing of metallic materials - Tensile test pieces
- DIN EN 2830:1993-04 Aerospace series; adhesion test for metallic coatings by shearing action; german version EN 2830:1993
- DIN EN 3238:2011 Aerospace series - Metallic materials - Test method - Shear test for wires and rivets; German and English version EN 3238:2010
- DIN EN 3238:2011-04 Aerospace series - Metallic materials - Test method - Shear test for wires and rivets; German and English version EN 3238:2010
- DIN EN 2667-2:2018 Aerospace series - Non-metallic materials - Foaming structural adhesives - Test methods - Part 2: Compressive tube shear; German and English version EN 2667-2:2018
- DIN EN 2243-1:2007-04 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 1: Single lap shear; German and English version EN 2243-1:2005
- DIN EN 2667-2:2018-03 Aerospace series - Non-metallic materials - Foaming structural adhesives - Test methods - Part 2: Compressive tube shear; German and English version EN 2667-2:2018
- DIN EN 2243-1:2007 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 1: Single lap shear; German and English version EN 2243-1:2005
- DIN 51367:1991 Testing of metal working fluids; determination of the stability of emulsified metal working fluids in hard water
- DIN EN 846-9:2000 Methods of tests for ancillary components for masonry - Part 9: Determination of flexural resistance and shear resistance of lintels; German version EN 846-9:2000
- DIN EN ISO 9018:2004 Destructive tests on welds in metallic materials - Tensile test on cruciform and lapped joints (ISO 9018:2003); German version EN ISO 9018:2003
- DIN 50115:1991 Notched bar impact testing of metallic materials using test pieces other than ISO test pieces
- DIN EN 2002-002:2006 Aerospace series - Metallic materials - Test methods - Part 2: Tensile testing at elevated temperature; German and English version EN 2002-002:2005
- DIN EN 2002-001:2006 Aerospace series - Metallic materials - Test methods - Part 1: Tensile testing at ambient temperature; German and English version EN 2002-001:2005
- DIN EN 13523-5:2014-08 Coil coated metals - Test methods - Part 5: Resistance to rapid deformation (impact test); German version EN 13523-5:2014
- DIN EN 13523-7:2022 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
Professional Standard - Aviation, metal shear test
- HB 6736-1993 Method of Shear Test for Sheet Metal
- HB 5213-1982 High Temperature Shear Test Method for Metals
- HB 5148-1980 Rivet, wire shear test method
- HB 5148-1996 Rivet, wire shear test method
- HB 5164-1981 Test method for tensile shear strength of metal bonded joints
- HB 6686-1992 Test Method for Tensile Shear Creep Properties of Adhesives (Metal to Metal)
- HB 6685-1992 Test Method for Compression Shear Creep Properties of Adhesives (Metal to Metal)
PL-PKN, metal shear test
- PN H04321-1986 Metalls Testing of shear strength
- PN H04630-1966 Corrosion tes?ing of me?als Laboratory ?es?ing of intercrystalline corrosion resis?ance of corrosion resis?ing steel
(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, metal shear test
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, metal shear test
- GB/T 7750-1987 The method of creep properties of adhesive in shear by tension loading (metal to metal)
- GB 7750-1987 Test Method for Tensile Shear Creep Properties of Adhesives (Metal to Metal)
- GB/T 6400-2007 Metallic materiaks-Shear test method for wires and rivets
- GB/T 6400-1986 High temperature shear test method for metals wires and rivets
- GB 6400-1986 High temperature shear test method for metals wires and rivets
- GB/T 43115-2023 Room temperature shear test method for metallic material sheets and strips
- GB/T 3252-1982 Aluminum and aluminum alloys--Shear test method for rivet wire and rivets
- GB/T 3250-2007 Aluminium and aluminium alloys shear test method for rivet wire and rivets
and riveting test method for rivet wire
- GB/T 28487-2012 Precious metal alloys chains.Determination of tensile strength.Method of tensile testing
Military Standard of the People's Republic of China-General Armament Department, metal shear test
- GJB 444-1988 Test method for high temperature tensile shear strength of adhesives (metal-to-metal)
- GJB 5215.8-2003 Test methods for metal cartridges Part 8: Burst resistance test Ammonia gas method
- GJB 8671.8-2015 Test methods for metal cartridges Part 8: Burst resistance test Ammonia gas method
British Standards Institution (BSI), metal shear test
- BS EN 2830:1993 Adhesion test for metallic coatings by shearing action
- BS EN 3238:2010 Aerospace series. Metallic materials. Test method. Shear test for wires and rivets
- BS EN 2243-6:2005 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Determination of shear stress and shear strain
- BS EN 14869-2:2011 Structural adhesives. Determination of shear behaviour of structural bonds. Thick adherends shear test
- BS EN 14869-2:2004 Structural adhesives. Determination of shear behaviour of structural bonds. Thick adherends shear test
- BS EN ISO 2740:2009 Sintered metal materials, excluding hardmetals - Tensile test pieces
- BS EN 895:1995 Destructive tests on welds in metallic materials - Transverse tensile test
- BS ISO 19819:2004 Metallic materials - Tensile testing in liquid helium
- BS 5350-C5:2002 Methods of test for adhesives - Determination of bond strength in longitudinal shear for rigid adherends
- BS EN 302-1:2013 Adhesives for load-bearing timber structures. Test methods. Determination of longitudinal tensile shear strength
- BS EN ISO 14556:2015 Metallic materials. Charpy V-notch pendulum impact test. Instrumented test method
- BS EN ISO 6892-1:2016 Metallic materials. Tensile testing. Method of test at room temperature
- BS EN ISO 6892-2:2011 Metallic materials. Tensile testing. Method of test at elevated temperature
- BS EN ISO 6892-1:2019 Metallic materials. Tensile testing. Method of test at room temperature
- BS EN 10045-1:1990 Charpy impact test on metallic materials - Test method (V- and U-notches)
- BS EN 10045-1:1990(1998) Charpy impact test on metallic materials - Test method (V- and U-notches)
- BS EN ISO 6892-1:2009 Metallic materials —
Tensile testing
Part 1: Method of test at ambient
temperature
- BS EN 302-1:2004 Adhesives for load bearing timber structures - Test methods - Determination of bond strength in longitudinal tensile shear strength
- BS EN 60811-504:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Mechanical tests. Bending tests at low temperature for insulation and sheaths
- BS EN 2667-2:2018 Aerospace series. Non-metallic materials. Foaming structural adhesives. Test methods. Compressive tube shear
- BS EN ISO 9018:2003 Destructive tests on welds in metallic materials - Tensile test on cruciform and lapped joints
- BS ISO 15540:2016 Ships and marine technology. Fire resistance of non-metallic hose assemblies and non-metallic compensators. Test methods
Standard Association of Australia （SAA）, metal shear test
- AS 1330:2004 Metallic materials - Drop weight tear test for ferritic steels
- AS 1289.6.2.2:2020 Methods of testing soils for engineering purposes, Method 6.2.2: Soil strength and consolidation tests — Determination of shear strength of a soil — Direct shear test using a shear box
- AS 1391:2005 Metallic materials - Tensile testing at ambient temperature
- AS 1937.9:1991 Methods of test for sealers and adhesives for automotive purposes - Determination of shear strength of metal-to-metal adhesive
Underwriters Laboratories (UL), metal shear test
- UL 1296-1992 Shear resistance tests for ceiling boards for manufactured homes
Association Francaise de Normalisation, metal shear test
- NF EN 2830:1993 Série aérospatiale - Essai d'adhérence des revêtements métalliques par cisaillage
- NF L10-112*NF EN 2830:1993 Aerospace series. Adhesion test for metallic coatings by shearing action.
- NF EN 3238:2011 Série aérospatiale - Matériaux métalliques - Méthodes d'essais - Essai de cisaillement pour fils et rivets
- NF L17-300-6*NF EN 2243-6:2006 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 6 : determination of shear stress and shear strain.
- NF L06-451*NF EN 3238:2011 Aerospace series - Metallic materials - Test method - Shear test for wires and rivets.
- NF A03-604:1977 Foundry products-pigs. Iron-machinability testing.
- NF EN 846-7:2013 Méthodes d'essai des composants accessoires de maçonnerie - Partie 7 : détermination de la charge admissible au cisaillement et des caractéristiques effort-déformation des attaches résistant au cisaillement et des attaches de glissement (essai d...
- NF T76-141-2*NF EN 14869-2:2011 Structural adhesives - Determination of shear behaviour of structural bonds - Part 2 : thick adherends shear test
- NF L17-300-1*NF EN 2243-1:2006 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 1 : single lap shear.
- NF L17-310-2*NF EN 2667-2:2018 Aerospace series - Non-metallic materials - Foaming structural adhesives - Test methods - Part 2 : compressive tube shear
- FD A89-206:2014 Welding and allied processes - Shear testing resistances spot, seam and embossed projection welds - Type of rupture
- NF P30-316:2009 Roofing and wall cladding - Fasteners - Determination of the characteristic resistance of the assembly - Test method for shearing by transverse tensile testing.
- NF EN 2667-2:2018 Série aérospatiale - Matériaux non-métalliques - Adhésifs structuraux expansibles - Méthodes d'essai - Partie 2 : cisaillement sur tube en compression
- NF A05-501-11*NF EN ISO 7539-11:2015 Corrosion of metals and alloys - Stress corrosion testing - Part 11 : guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen assisted cracking
- NF T76-152-1:1992 ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES. TEST METHODS. PART 1 : DETERMINATION OF BOND STRENGTH IN LONGITUDINAL TENSILE SHEAR. (EUROPEAN STANDARD EN 302-1).
- NF EN 2243-6:2006 Série aérospatiale - Matériaux non-métalliques - Système d'adhésifs structuraux - Méthodes d'essai - Partie 6 : détermination de la contrainte et de la déformation de cisaillement
- NF T37-001-5*NF EN 13523-5:2014 Coil coated metals - Test methods - Part 5 : resistance to rapid deformation (impact test)
- NF EN 2243-1:2006 Série aérospatiale - Matériaux non-métalliques - Système d'adhésifs structuraux - Méthodes d'essai - Partie 1 : essais de cisaillement d'un joint à recouvrement simple
- NF C20-758:1990 Environmental testing. Test methods. Test Td : solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (smd).
- NF T37-001-7:2014 Coil coated metals - Test methods - Part 7 : resistance to cracking on bending (T-bend test)
- NF T37-001-7*NF EN 13523-7:2021 Coil coated metals - Test methods - Part 7 : resistance to cracking on bending (T-bend test)
- NF P12-605-7*NF EN 846-7:2013 Methods of test for ancillary components for masonry - Part 7 : determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections)
American Society for Testing and Materials (ASTM), metal shear test
- ASTM F1044-05 Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings
- ASTM F1044-99 Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings
- ASTM F1044-05(2011)e1 Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings
- ASTM F1044-05(2017)e1 Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings
- ASTM B769-06 Standard Test Method for Shear Testing of Aluminum Alloys
- ASTM D1002-10 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
- ASTM D3170-03 Standard Test Method for Chipping Resistance of Coatings
- ASTM D3170-87(1996)e1 Standard Test Method for Chipping Resistance of Coatings
- ASTM B769-94(2000) Standard Test Method for Shear Testing of Aluminum Alloys
- ASTM B769-11 Standard Test Method for Shear Testing of Aluminum Alloys
- ASTM B769-11(2021) Standard Test Method for Shear Testing of Aluminum Alloys
- ASTM B769-11(2016) Standard Test Method for Shear Testing of Aluminum Alloys
- ASTM E767-96 Standard Test Method for Shear Strength Properties of Metal Connector Plates
- ASTM D3166-99(2012) Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal)
- ASTM D3166-99(2020) Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal)
- ASTM D1002-10(2019) Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
- ASTM D2293-96(2016) Standard Test Method for Creep Properties of Adhesives in Shear by Compression Loading (Metal-to-Metal)
- ASTM F1160-14(2017)e1 Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings
- ASTM D2295-96(2002) Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)
- ASTM D2295-96(2008) Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)
- ASTM F1160-00 Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings
- ASTM F1160-00e1 Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings
- ASTM F1160-05 Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings
- ASTM F1160-05(2011)e1 Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings
- ASTM D2294-96(2016) Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)
- ASTM B769-07 Standard Test Method for Shear Testing of Aluminum Alloys
- ASTM B831-05 Standard Test Method for Shear Testing of Thin Aluminum Alloy Products
- ASTM B831-93(1998) Standard Test Method for Shear Testing of Thin Aluminum Alloy Products
- ASTM B831-11 Standard Test Method for Shear Testing of Thin Aluminum Alloy Products
- ASTM B831-19 Standard Test Method for Shear Testing of Thin Aluminum Alloy Products
- ASTM B831-22 Standard Test Method for Shear Testing of Thin Aluminum Alloy Products
- ASTM B831-14 Standard Test Method for Shear Testing of Thin Aluminum Alloy Products
- ASTM F1160-14 Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings
- ASTM D3163-01 Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading
- ASTM D3163-96 Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading
- ASTM D3163-01(2008) Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading
- ASTM D3163-01(2014) Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading
- ASTM D3166-99 Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal)
- ASTM D3166-99(2005) Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal)
- ASTM D2295-96(2016) Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)
- ASTM D6467-99 Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Cohesive Soils
- ASTM D6467-06 Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Cohesive Soils
- ASTM D6467-06a Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Cohesive Soils
- ASTM D6467-21 Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Fine-Grained Soils
- ASTM D5656-01 Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading
- ASTM D6467-13 Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Cohesive Soils
- ASTM D5656-10 Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading
- ASTM D8121/D8121M-18 Standard Test Method for Approximating the Shear Strength of Cohesive Soils by the Handheld Vane Shear Device
- ASTM D8121/D8121M-19 Standard Test Method for Approximating the Shear Strength of Cohesive Soils by the Handheld Vane Shear Device
- ASTM D1002-05 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
- ASTM D1002-99 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
- ASTM D1002-01 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
- ASTM E2126-07 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Walls for Buildings
- ASTM D5656-04 Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading
- ASTM D5656-04e1 Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading
- ASTM E345-93(2002) Standard Test Methods of Tension Testing of Metallic Foil
- ASTM E23-02 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
- ASTM E23-01 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
- ASTM E23-02a Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
- ASTM E23-01a Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
- ASTM D732-10 Standard Test Method for Shear Strength of Plastics by Punch Tool
- ASTM D2295-96 Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)
- ASTM F1659-95 Standard Test Method for Bending and Shear Fatigue Testing of Calcium Phosphate Coatings on Solid Metallic Substrates
- ASTM D5618-94(2005) Standard Test Method for Measurement of Barnacle Adhesion Strength in Shear
- ASTM D5618-94(2011) Standard Test Method for Measurement of Barnacle Adhesion Strength in Shear
- ASTM E767-96(2001) Standard Test Method for Shear Strength Properties of Metal Connector Plates (Withdrawn 2005)
- ASTM E23-06 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
- ASTM E23-12c Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
- ASTM C1469-00 Standard Test Method for Shear Strength of Joints of Advanced Ceramics at Ambient Temperature
- ASTM C1469-00(2005) Standard Test Method for Shear Strength of Joints of Advanced Ceramics at Ambient Temperature
- ASTM C1469-10 Standard Test Method for Shear Strength of Joints of Advanced Ceramics at Ambient Temperature
- ASTM B565-94(2000) Standard Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods
- ASTM B565-04 Standard Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods
- ASTM B565-20 Standard Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods
- ASTM D6243-98 Standard Test Method for Determining the Internal and Interface Shear Resistance of Geosynthetic Clay Liner by the Direct Shear Method
- ASTM E23-05 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
- ASTM E23-04 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
- ASTM F152-95(2009) Standard Test Methods for Tension Testing of Nonmetallic Gasket Materials
- ASTM F152-95(2002) Standard Test Methods for Tension Testing of Nonmetallic Gasket Materials
- ASTM F152-95 Standard Test Methods for Tension Testing of Nonmetallic Gasket Materials
- ASTM E564-06 Standard Practice for Static Load Test for Shear Resistance of Framed Walls for Buildings
- ASTM D905-98 Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
- ASTM E564-00e1 Standard Practice for Static Load Test for Shear Resistance of Framed Walls for Buildings
- ASTM E564-00 Standard Practice for Static Load Test for Shear Resistance of Framed Walls for Buildings
- ASTM E564-06(2012) Standard Practice for Static Load Test for Shear Resistance of Framed Walls for Buildings
- ASTM E2126-10 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings
- ASTM E2126-11 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings
- ASTM D5656-10(2017) Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading
- ASTM E21-03 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
- ASTM E21-03a Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
- ASTM E21-05 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
- ASTM E21-92(1998)e1 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
- ASTM E21-92(1998) Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
- ASTM E345-93(2008) Standard Test Methods of Tension Testing of Metallic Foil
- ASTM E8/E8M-09 Standard Test Methods for Tension Testing of Metallic Materials
- ASTM C1469-10(2015) Standard Test Method for Shear Strength of Joints of Advanced Ceramics at Ambient Temperature
- ASTM D7617/D7617M-11 Standard Test Method for Transverse Shear Strength of Fiber-reinforced Polymer Matrix Composite Bars
- ASTM D7608-18 Standard Test Method for Torsional Ring Shear Test to Measure Drained Fully Softened Shear Strength and Stress Dependent Strength Envelope of Fine-Grained Soils
- ASTM D905-03 Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
- ASTM B565-04(2010) Standard Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods
- ASTM F1147-05 Standard Test Method for Tension Testing of Calcium Phosphate and Metal Coatings
- ASTM D905-08e1 Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
- ASTM C1292-16 Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
- ASTM D905-08(2013) Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
- ASTM B565-04(2015) Standard Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods
- ASTM D5656-95(2000) Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading
- ASTM E23-07ae1 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
- ASTM E23-07a Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
- ASTM E23-07 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
- ASTM D7608-10 Standard Test Method for Torsional Ring Shear Test to Determine Drained Fully Softened Shear Strength and Nonlinear Strength Envelope of Cohesive Soils (Using Normally Consolidated Specimen) for Slopes with No Preexisting Shear Surfaces
- ASTM D561-82(1996)e1 Standard Specification for Carbon Black Pigment for Paint
- ASTM D5619-00(2011) Standard Test Method for Comparing Metal Removal Fluids Using the Tapping Torque Test Machine
- ASTM D3165-00 Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies
- ASTM D7966/D7966M-14 Standard Test Method for Resistance to Creep of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)
- ASTM E2126-09 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings
- ASTM D1062-96e1 Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds
- ASTM D1062-08(2015) Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds
- ASTM D1062-08 Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds
- ASTM D7049-04(2010) Standard Test Method for Metal Removal Fluid Aerosol in Workplace Atmospheres
- ASTM D906-98(2004) Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading
- ASTM D906-98(2011) Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading
- ASTM D906-98 Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading
- ASTM D3115-95 Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear
- ASTM D7966/D7966M-16(2023) Standard Test Method for Resistance to Creep of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)
- ASTM D3115-95(2005) Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear
- ASTM F19-11 Standard Test Method for Tension and Vacuum Testing Metallized Ceramic Seals
- ASTM E251-92(2014) Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages
- ASTM E251-92(2009) Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages
- ASTM D7049-04 Standard Test Method for Metal Removal Fluid Aerosol in Workplace Atmospheres
Korean Agency for Technology and Standards (KATS), metal shear test
- KS F 2154-2022 Method of shear(racking) resistance test for light-frame wood shear walls
- KS B ISO 4136:2008 Destructive tests on welds in metallic materials－Transverse tensile test
- KS D ISO 19819:2005 Metallic materials-Tensile testing in liquid helium
- KS B ISO 5178:2002 Destructive tests on welds in metallic materials－Longitudinal tensile test on weld metal in fusion welded joints
- KS B ISO 9016:2002 Destructive tests on welds in metallic materials-Impact tests-Test specimen location, notch orientation and examination
- KS B ISO 9016:2015 Destructive tests on welds in metallic materials-Impact tests-Test specimen location, notch orientation and examination
Japanese Industrial Standards Committee (JISC), metal shear test
- JIS Z 3192:1999 Methods of tensile and shear tests for brazed joint
- JIS Z 2288:2003 Methods of tensile shear test and bend test for thin clad steel sheets
- JIS K 6855:1994 Testing methods for impact shear strength of adhesive bonds
- JIS K 6850:1994 Testing methods for shear strength of adhesive bonds by tensile loading
- JIS Z 2201:1980 Test pieces for tensile test for metallic materials
- JIS Z 2201:1998 Test pieces for tensile test for metallic materials
- JIS K 6851:1994 Testing methods for tensile shear strength of wood-to-wood adhesive bonds
- JIS H 7904:2012 High speed compression test for porous and cellular metals
- JIS H 7601-2:2002 Method of tensile test for intermetallic compounds -- Part 2: Elevated temperature tensile test
- JIS H 7601-1:2002 Method of tensile test for intermetallic compounds -- Part 1: Room temperature tensile test
- JIS T 6002:2005 Dental metallic materials -- Corrosion test methods
- JIS G 0511:2006 Stress corrosion cracking testing of metals and alloys using reverse U-bend test method
- JIS G 0511:2014 Stress corrosion cracking testing of metals and alloys using reverse U-bend test method
Professional Standard - Petroleum, metal shear test
- SY/T 0041-2012 Standard test method for apparent shear strength of coatings to metal
- SY/T 0041-1997 Test method for apparent shear strength of pipeline coatings to metal
Group Standards of the People's Republic of China, metal shear test
- T/CASAS 018-2021 Test method for shear strength of micro and nano metal sintered joints
Lithuanian Standards Office , metal shear test
- LST EN 2830-2001 Aerospace series - Adhesion test for metallic coatings by shearing action
- LST EN 3238-2011 Aerospace series - Metallic materials - Test method - Shear test for wires and rivets
- LST EN 2243-6-2005 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 6: Determination of shear stress and shear strain
- LST EN ISO 14273:2002 Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds (ISO 14273:2000)
- LST EN 2243-1-2006 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 1: Single lap shear
- LST EN 13523-5-2002 Coil coated metals - Test methods - Part 5: Resistance to rapid deformation (impact test)
- LST EN 13523-9-2014 Coil coated metals - Test methods - Part 9: Resistance to water immersion
- LST EN 13523-7-2002 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, metal shear test
- PREN 2021-2000 Aerospace Series Metallic Materials Test Methods Shear Testing for Thinflat Product (Edition P1)
- PREN 3238-1993 Aerospace Series Test Methods for Metallic Materials Except Aluminium and Aluminium Alloys Shear Test for Wires and Rivets
- PREN 3238-2009 Aerospace series Metallic materials Test method Shear test for wires and rivets (Edition P 1)
- PREN 4525-1998 Aerospace Series Aluminium and Aluminium Alloys Test Methods Shear Testing (Edition P1)
- PREN 2243-6-2001 Aerospace Series Non-Metallic Materials Structural Adhesives Test Method Part 6: Determination of Shear Stress and Shear Strain (Edition P 2)
- PREN 2830-1990 Aerospace Series Adhesion Test for Metallic Coatings by Shearing Action (Edition 1)
ZA-SANS, metal shear test
- SANS 6044:2006 Shear strength in compression of wood adhesive bonds - Block shear test
- SANS 4136:2004 Destructive tests on welds in metallic materials - Transverse tensile test
Danish Standards Foundation, metal shear test
- DS/EN 2830:1993 Aerospace series. Adhesion test for metallic coatings by shearing action
- DS/EN 3238:2010 Aerospace series - Metallic materials - Test method - Shear test for wires and rivets
- DS/EN 2243-6:2005 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 6: Determination of shear stress and shear strain
- DS/EN 2243-1:2006 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 1: Single lap shear
- DS/EN 13523-5:2001 Coil coated metals - Test methods - Part 5: Resistance to rapid deformation (impact test)
- DS/EN 302-1:1994 Adhesives for load-bearing timber structures. Test methods. Part 1: Determination of bond strength in longitudinal tensile shear
- DS/EN 13523-7:2001 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
European Committee for Standardization (CEN), metal shear test
- EN 3238:2010 Aerospace series - Metallic materials - Test method - Shear test for wires and rivets
- EN 2243-6:2005 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 6: Determination of shear stress and shear strain
- EN 2830:1993 Aerospace series; adhesion test for metallic coatings by shearing action
- prEN 846-7-1992 Methods of tests for ancillary components for masonry; part 7: determination of shear load resistance and stiffness of shear ties (couplet test for mortar joint connections)
- EN 2667-2:2018 Aerospace series - Non-metallic materials - Foaming structural adhesives - Test methods - Part 2: Compressive tube shear
- EN 846-9:2000 Methods of Test for Ancillary Components for Masonry - Part 9: Determination of Flexural Resistance and Shear Resistance of Lintels
- EN 895:1995 Destructive Tests on Welds in Metallic Materials - Transverse Tensile Test
- EN 205:1991 Test methods for wood adhesives for non-structural applications; determination of tensile shear strength of lap joints
- prEN 846-9-1992 Methods of tests for ancillary components for masonry; part 9: determination of flexural resistance, shear load resistance and stiffness of lintels
- EN 2243-1:2005 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 1: Single lap shear
- prEN 910-1992 Welding; welded butt joints in metallic materials; bend tests
- prEN 895-1992 Welding; welded joints in metallic materials; transverse tensile tests
- EN 2336:2005 Aerospace series - Bearings, spherical plain in steel with assembly slots - Dimensions and loads
- CEN EN 13523-5-2001 Coil Coated Metals - Test Methods - Part 5: Resistance to Rapid Deformation (Impact Test)
- EN 13523-9:2001 Coil Coated Metals - Test Methods - Part 9: Resistance to Water Immersion
- EN 13523-8:2002 Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog)
- EN 13523-5:2001 Coil Coated Metals - Test Methods - Part 5: Resistance to Rapid Deformation (Impact Test)
- EN 13523-5:2014 Coil coated metals - Test methods - Part 5: Resistance to rapid deformation (impact test)
ES-UNE, metal shear test
- UNE-EN 3238:2010 Aerospace series - Metallic materials - Test method - Shear test for wires and rivets (Endorsed by AENOR in November of 2010.)
Society of Automotive Engineers (SAE), metal shear test
- SAE J1523-2012 Metal to Metal Overlap Shear Strength Test for Automotive Type Adhesives
- SAE J1523-1993 Metal to Metal Overlap Shear Strength Test for Automotive Type Adhesives, Recommended Practice
SAE - SAE International, metal shear test
- SAE J1523-2021 Metal to Metal Overlap Shear Strength Test for Automotive Type Adhesives
- SAE J1523-1985 Metal to Metal Overlap Shear Strength Test for Automotive Type Adhesives@ Recommended Practice
RU-GOST R, metal shear test
- GOST 31615-2012 Implants for surgery. Standard test method for shear testing of calcium phosphate coatings and metallic coatings
- GOST R 57207-2016 Polymer composites. Test method for shear properties of V-notched test samples
- GOST 8-1982 Metal cutting machine tools. General requirements to accuracy tests
- GOST R 52641-2006 Implants for surgery. Standard test method for shear testing of calcium phosphate coatings and metallic coatings
- GOST 7035-1975 Metal-cutting and wood-working machines. General conditions for testing of machine tool rigidity
AT-ON, metal shear test
- ONORM EN 2830-1993 Aerospace series - Adhesion test for metallic coatings by shearing action
- OENORM EN 13523-7-2021 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
CZ-CSN, metal shear test
- CSN 66 8510-1960 Method of test for strength properties of adhesives in shear by tension loading (metal to metal)
AENOR, metal shear test
- UNE-EN 2243-6:2006 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 6: Determination of shear stress and shear strain
- UNE-EN 2830:1996 AEROSPACE SERIES. ADHESION TEST FOR METALLIC COATINGS BY SHEARING ACTION.
- UNE-EN 2243-1:2006 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 1: Single lap shear
- UNE-EN 13523-5:2014 Coil coated metals - Test methods - Part 5: Resistance to rapid deformation (impact test)
- UNE-EN 13523-7:2014 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
ES-AENOR, metal shear test
HU-MSZT, metal shear test
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, metal shear test
- GB/T 34487-2017 Shear testing method of aluminium alloy products for structural members
- GB/T 3250-2017 Shearing and riveting test method of wires and rods for the aluminum and aluminum-alloy rivets
- GB/T 34205-2017 Metallic materials—Hardness testing—Ultrasonic contact impedance method
- GB/T 34477-2017 Metallic materials—Sheet and strip—Dent resistance test method
Aerospace, Security and Defence Industries Association of Europe (ASD), metal shear test
- ASD-STAN PREN 3238-2009 Aerospace series Metallic materials Test method Shear test for wires and rivets (Edition P 1)
- ASD-STAN PREN 2830-1990 Aerospace Series Adhesion Test for Metallic Coatings by Shearing Action (Edition 1)
- ASD-STAN PREN 2021-2000 Aerospace Series Metallic Materials Test Methods Shear Testing for Thinflat Product (Edition P1)
- ASD-STAN PREN 2243-6-2001 Aerospace Series Non-Metallic Materials Structural Adhesives Test Method Part 6: Determination of Shear Stress and Shear Strain (Edition P 2)
- ASD-STAN PREN 4525-1998 Aerospace Series Aluminium and Aluminium Alloys Test Methods Shear Testing (Edition P1)
- ASD-STAN PREN 2667-1-1996 Aerospace Series Non-Metallic Materials Foaming Structural Adhesives Test Methods Part 1: Tensile Single-Lap Shear (Edition P 1)
- ASD-STAN PREN 2667-2-1996 Aerospace Series Non-Metallic Materials Foaming Structural Adhesives Test Methods Part 2: Compressive Tube Shear (Edition P 1)
International Organization for Standardization (ISO), metal shear test
- ISO/R 2101:1971 Aluminium and aluminium alloys — Shear test for rivet wire and rivets
- ISO 15579:2000 Metallic materials - Tensile testing at low temperature
- ISO 6892-4:2015 Metallic materials - Tensile testing - Part 4: Method of test in liquid helium
- ISO 19819:2004 Metallic materials - Tensile testing in liquid helium
- ISO 10271:2001 Dental metallic materials - Corrosion test methods
- ISO 14556:2015 Metallic materials - Charpy V-notch pendulum impact test - Instrumented test method
- ISO 4385:1981 Plain bearings; Compression testing of metallic bearing materials
- ISO 6892-1:2009 Metallic materials - Tensile testing - Part 1: Method of test at room temperature
- ISO 6892-1:2016 Metallic materials - Tensile testing - Part 1: Method of test at room temperature
- ISO 10271:2001/Cor 1:2005 Dental metallic materials - Corrosion test methods; Technical Corrigendum 1
- ISO 9016:2012 Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination
- ISO 9016:2001 Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination
- ISO 15540:2016 Ships and marine technology - Fire resistance of non-metallic hose assemblies and non-metallic compensators - Test methods
Professional Standard - Medicine, metal shear test
- YY/T 0988.12-2016 Coatings of surgical implants.Part 12:Shear testing method of calcium phosphate coating and metallic coatings
- YY/T 0988.13-2016 Coatings of surgical implants.Part 13:Test method for shear and bending fatigue testing of calcium phosphate and metallic and calcium phosphate/metallic coating
American National Standards Institute （ANSI), metal shear test
The American Road & Transportation Builders Association, metal shear test
- AASHTO T 266-2007 Standard Method of Test for Notched Bar Impact Testing of Metallic Materials (CVN)
SE-SIS, metal shear test
- SIS SS 11 23 53-1983 Powder metallurgy - Sintered metal materials - Impact testing using unnotched test piece
BE-NBN, metal shear test
European Association of Aerospace Industries, metal shear test
- AECMA PREN 3238-2009 Aerospace series Metallic materials Test method Shear test for wires and rivets Edition P 1
- AECMA PREN 2002-23-1991 Aerospace Series Test Methods for Metallic Materials Part 23 - Sharp-Notch Tension Testing Issue P 1
Professional Standard - Chemical Industry, metal shear test
- HG/T 2378~2379-2007 Graphite adhesive bond tensile strength test method Graphite adhesive bond shear strength test method
Aerospace Industries Association, metal shear test
- AIA NAS 979-1969 Uniform Cutting Tests - NAS Series Metal Cutting Equipment Specifications Rev. 1
Aerospace Industries Association/ANSI Aerospace Standards, metal shear test
- AIA/NAS NAS979-2013 UNIFORM CUTTING TESTS - NAS SERIES METAL CUTTING EQUIPMENT SPECIFICATIONS Rev 2
AIA/NAS - Aerospace Industries Association of America Inc., metal shear test
- NAS979-2013 UNIFORM CUTTING TESTS - NAS SERIES METAL CUTTING EQUIPMENT SPECIFICATIONS (Rev 2)
YU-JUS, metal shear test
- JUS C.A5.061-1989 Metals tests. Determination of resistance to inlergranuiar corrosion by Huey test
GM North America, metal shear test
AR-IRAM, metal shear test
BR-ABNT, metal shear test
- ABNT NBR 15664-3-2011 Orthopaedic implants - Product coating Part 3- Test method for determining shear and bending fatigue strength of calcium phosphate, metallic and composite calcium phosphate/metallic coatings