ZH
RU
ES

Oxygen Bomb Oxygen Meter

Oxygen Bomb Oxygen Meter, Total:500 items.

In the international standard classification, Oxygen Bomb Oxygen Meter involves: Coals, Analytical chemistry, Medical equipment, Resistors, Protective equipment, Air quality, Fuels, Lubricants, industrial oils and related products, Alarm and warning systems, Installations in buildings, On-board equipment and instruments, Inorganic chemicals, Electrical wires and cables, Electrical engineering in general, Environmental testing, Surface treatment and coating, Aircraft and space vehicles in general, Textile fibres, Equipment for petroleum and natural gas industries, Pharmaceutics, Electrical accessories, Seals, glands, Petroleum products in general, Geology. Meteorology. Hydrology, Extraction and processing of petroleum and natural gas, Metrology and measurement in general, Diagnostic, maintenance and test equipment, Power stations in general, Equipment for the chemical industry, Industrial automation systems, Linear and angular measurements, Products of the chemical industry, Mining equipment, Products of non-ferrous metals, Thermodynamics and temperature measurements, Materials for aerospace construction, Water quality, Rubber, Radiation protection, Vocabularies, Wastes, Road vehicles in general, Environmental protection, Optics and optical measurements, Microbiology, Farming and forestry, Rubber and plastics products, Waxes, bituminous materials and other petroleum products, Integrated circuits. Microelectronics, Electricity. Magnetism. Electrical and magnetic measurements, Refractories, Organic chemicals, Insulating materials, Power transmission and distribution networks, Plastics, Iron and steel products, Sports equipment and facilities, Electrical equipment for working in special conditions, Electromagnetic compatibility (EMC), Applications of information technology, Non-ferrous metals.


Professional Standard - Coal, Oxygen Bomb Oxygen Meter

  • MT/T 737-1997 Specification of verification for safe use of oxygen combustion bomb
  • MT/T 737-2007 Specification of verification for safe use of oxygen combustion bomb
  • MT 59-1981 AJH type oxygen respirator calibrator

Professional Standard - Petrochemical Industry, Oxygen Bomb Oxygen Meter

  • SH/T 0060-1991 Oxygen Absorption Determination of Antirust Grease (Oxygen Bomb Method)
  • SH/T 0193-2008 Lubricating oils.Determination of oxidation stability.Rotating pressure vessel method
  • SH/T 0193-1992 Lubricating Oil Oxidation Stability Determination Method (Rotary Oxygen Bomb Method)

Professional Standard - Machinery, Oxygen Bomb Oxygen Meter

  • JB/T 9507-1999 Oxygen bomb calorimeter
  • JB/T 4278.9-1993 Rubber plastic wire and cable test equipment verification method Oxygen bomb, air bomb aging test chamber
  • JB/T 4278.9-2011 Verification procedure for test equipment of rubber plastic wire and cable.Part 9: Oxygen bomb, air bomb aging test oven

Society of Automotive Engineers (SAE), Oxygen Bomb Oxygen Meter

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Oxygen Bomb Oxygen Meter

  • GB/T 19904-2005 Electrochemical oxygenmeter for medical hyperbaric oxygen chamber
  • GB/T 32707-2016 Safety requirements for laboratory instruments and equipments.Oxygen bomb calorimeter
  • GB/T 32208-2015 Chemical oxygen demand meters
  • GB/T 31423-2015 Guide for performance acceptance of oxygen bomb calorimeter
  • GB/T 388-1964 Determination of sulfur content in petroleum products(oxygen bomb method)
  • GB/T 20506-2006 Anodizing of aluminium and its alloys. Measurement of reflectance characteristics of aluminium surfaces using abridged goniophotometer or goniophotometer
  • GB/T 30991-2014 General specification for intelligent oxygen bomb calorimeter
  • GB/T 12967.1-1991 Anodizing of aluminium and aluminium alloys--Measurement of mean specific abrasion resistance of anodic oxidation coatings with an abrasive jet test apparatus
  • GB/T 13939-1992 Rubber,vulcanized.Test method of heat and oxygen.Tube tester ageing method
  • GB/T 13939-2014 Rubber, vulcanized.Test method of deterioration by heat and oxygen.Tube tester
  • GB/T 12967.2-1991 Anodizing of aluminium and aluminium alloys--Measurement of wear resistance and wear index of anodic oxidation coatings with an abrasive wheel wear test apparatus
  • GB/T 12967.7-2010 Test methods for anodic oxidation coatings of aluminium and aluminium alloys.Part 7: Measurement of abrasion resistance of anodic oxidation coatings by sand falling test apparatus
  • GB/T 12967.1-2008 Test methods for anodic oxidation coatings of aluminium and aluminium alloys.Part 1:Measurement of meat specific abrasion resistance of anodic oxidation coatings with an abrasive jet test apparatus
  • GB/T 31225-2014 Test method for the thickness of silicon oxide on Si substrate by ellipsometer
  • GB/T 12967.2-2008 Test methods for anodic oxidation coatings of aluminium and aluminium alloys.Part 2:Measurement of wear resistance and wear index of anodic oxidation coatings with an abrasive wheel wear test apparatus
  • GB/T 26930.9-2014 Carbonaceous materials used in the production of aluminium.Pitch for electrodes.Part 9:Determination of sulful content by the bomb method

National Metrological Verification Regulations of the People's Republic of China, Oxygen Bomb Oxygen Meter

Professional Standard - Aquaculture, Oxygen Bomb Oxygen Meter

SAE - SAE International, Oxygen Bomb Oxygen Meter

Korean Agency for Technology and Standards (KATS), Oxygen Bomb Oxygen Meter

  • KS P 6124-2006(2016) Oxygen analyzers for medical use
  • KS E 4920-1988(2009) Digital oxygen detector
  • KS P ISO 9919-2007(2012) Pulse oximeters for medical use－Requirements
  • KS C 6594-2007(2018) Performance requirements for instruments used to detect oxygen-deficient/oxygen-enriched atmospheres
  • KS B 5353-1980(2022) Continuous Analyzers for Oxygen in Flue Gas
  • KS D ISO 10216-2012(2017) Anodizing of aluminium and its alloys－Instrumental determination of image clarity of anodic oxidation coatings－Instrumental method
  • KS C 6595-2007(2018) Installation, operation and maintenance of instruments used to detect oxygen-deficient/oxygen-enriched atmospheres
  • KS D ISO 10216-2012(2022) Anodizing of aluminium and its alloys－Instrumental determination of image clarity of anodic oxidation coatings－Instrumental method
  • KS B 5353-1980 Continuous Analyzers for Oxygen in Flue Gas
  • KS R 3033-1984 Simplified carbonmonoxide testers for automobiles
  • KS B 5354-1993 Continuous Analyzers for sulfur dioxide in flue gas
  • KS R 3033-2013 Simplified carbonmonoxide testers for automobiles
  • KS B 5355-1993 Continuous analyzers for oxides of nitrogen in flue gas
  • KS B 5355-2003(2013) CONTINUOUS ANALYZERS FOR NITROGEN OXIDES IN FLUE GAS
  • KS B 5359-1990(2016) Continuous Analysers for Sulfur Dioxide in Ambient Air
  • KS B 5359-2001 Continuous Analysers for Sulfur Dioxide in Ambient Air
  • KS B 5354-2003 Continuous analyzers for dioxide sulfur in flue gas
  • KS B 5360-1990 Continuous Analysers for Oxides of Nitrogen in Ambient Air
  • KS B 5359-1990 Continuous Analysers for Sulfur Dioxide in Ambient Air
  • KS B 5358-1987 Continuous analyzer for carbon monoxide in ambient air
  • KS B 5354-2018 Continuous analyzers for dioxide sulfur in flue gas
  • KS B 5358-2001 Continuous analyzer for carbon monoxide in ambient air
  • KS B 5360-2001 Continuous Analysers for Oxides of Nitrogen in Ambient Air
  • KS B 5358-1982 Continuous analyzer for carbon monoxide in ambient air
  • KS B 5358-1987(2022) Continuous analyzer for carbon monoxide in ambient air
  • KS B 5358-1987(2017) Continuous analyzer for carbon monoxide in ambient air
  • KS B 5359-1990(2021) Continuous Analysers for Sulfur Dioxide in Ambient Air
  • KS B 5360-1990(2021) Continuous Analysers for Oxides of Nitrogen in Ambient Air
  • KS C IEC 60746-5-2014(2019) Expression of performance of electrochemical analyzers — Part 5: Oxidation-reduction potential or redox potential
  • KS I ISO 15337:2012 Ambient air-Gas phase titration-Calibration of analysers for ozone
  • KS B 5643-2003(2018) Continuous analyzers for oxidants in ambient air
  • KS C 6597-2007(2018) Installation, operation and maintenance of carbon monoxide detection instruments
  • KS B 5360-1990(2016) Continuous Analysers for Oxides of Nitrogen in Ambient Air
  • KS I ISO 15337:2017 Ambient air－Gas phase titration－Calibration of analysers for ozone
  • KS I ISO 15337:2022 Ambient air — Gas phase titration — Calibration of analysers for ozone
  • KS L ISO 21079-1-2012(2017) Chemical analysis of refractories containing alumina, zirconia and silica－Refractories containing 5 % to 45 % of ZrO2 (alternative to the X-ray fluorescence method)－Part 1：Apparatus, reagents and diss
  • KS R 1051-2013 Testing methods for simplified carbonmonoxide testers for automobiles
  • KS R 1051-2006(2011) Testing methods for simplified carbonmonoxide testers for automobiles
  • KS R 1051-1986 Testing methods for simplified carbonmonoxide testers for automobiles
  • KS C IEC 60601-2-23:2002 Medical electrical equipment－Part 2－23： Particular requirements for the safety, including essential performance, of transcutaneous partial pressure monitoring equipment
  • KS C 6596-2007(2018) Performance requirements for carbon monoxide detection instrument(50∼1 000 ppm full scale)
  • KS D ISO 10216:2012 Anodizing of aluminium and its alloys-Instrumental determination of image clarity of anodic oxidation coatings-Instrumental method
  • KS M ISO 9055:2004 Carbonaceous materials for the production of aluminium-Pitch for electrodes-Determination of sulfur content by the bomb method
  • KS M ISO 9055:2013 Carbonaceous materials for the production of aluminium－Pitch for electrodes－Determination of sulfur content by the bomb method
  • KS P ISO 7767:2009 Oxygen monitors for monitoring patientbreathing mixtures－Safety requirements
  • KS P ISO 7767:2003 Oxygen monitors for monitoring patientbreathing mixtures－Safety requirements
  • KS L ISO 21079-1-2012(2022) Chemical analysis of refractories containing alumina, zirconia and silica－Refractories containing 5 % to 45 % of ZrO2 (alternative to the X-ray fluorescence method)－Part 1：Apparatus, reagents and diss

国家市场监督管理总局、中国国家标准化管理委员会, Oxygen Bomb Oxygen Meter

U.S. Air Force, Oxygen Bomb Oxygen Meter

U.S. Military Regulations and Norms, Oxygen Bomb Oxygen Meter

American National Standards Institute （ANSI), Oxygen Bomb Oxygen Meter

RO-ASRO, Oxygen Bomb Oxygen Meter

VDI - Verein Deutscher Ingenieure, Oxygen Bomb Oxygen Meter

  • VDI 2298-1970 Auswurfbegrenzung; Schwefeldioxid und Schwefeltrioxid aus Schwefelsaeureanlagen

Professional Standard - Urban Construction, Oxygen Bomb Oxygen Meter

Japanese Industrial Standards Committee (JISC), Oxygen Bomb Oxygen Meter

  • JIS K 0803:1995 Continuous dissolved oxygen analyzer
  • JIS B 7957:2006 Continuous analyzers for ozone and oxidants in ambient air
  • JIS H 8686-2:2013 Anodizing of aluminium and its alloys.Instrumental determination of image clarity of anodic oxidation coatings.Instrumental method
  • JIS B 7957:1992 Continuous analyzers for oxidants in ambient air
  • JIS K 0806:1997 Automatic chemical oxygen demand meter
  • JIS B 7951:1986 Continuous analyzer for carbon monoxide in ambient air
  • JIS B 7981:1996 Continuous analyzers for sulfur dioxide in flue gas
  • JIS B 7952:2004 Continuous analyzer for sulfur dioxide in ambient air
  • JIS B 7951:2004 Continuous analyzer for carbon monoxide in ambient air
  • JIS B 7987:2006 Continuous analyzers for carbon monoxide in flue gas
  • JIS M 7605:1993 Detector tube type carbon monoxide measuring instruments (Colour-intensity)
  • JIS B 7983:1994 Continuous analyzers for oxygen in flue gas
  • JIS B 7982:1995 Continuous analyzers for oxides of nitrogen in flue gas
  • JIS B 7953:2004 Continuous analyzers for oxides of nitrogen in ambient air
  • JIS B 7986:2006 Continuous analyzers for carbon dioxide in flue gas
  • JIS M 7650:1993 Detector tube type carbon monoxide measuring instruments (Length-of-stain)
  • JIS B 7952:1996 Continuous analyzers for sulfur dioxide in ambient air
  • JIS B 7951:1998 Continuous analyzer for carbon monoxide in ambient air
  • JIS B 7953:1997 Continuous analysers for oxides of nitrogen in ambient air
  • JIS B 7983 AMD 1:2006 Continuous analyzers for oxygen in flue gas (Amendment 1)
  • JIS D 1029:1979 Testing method for simplified carbon monoxide testers for automobiles
  • JIS B 7982:2002 Automated measuring systems and analyzers for nitrogen oxides in flue gas
  • JIS K 3602:1990 Apparatus for the estimation of biochemical oxygen demand (BODs) with microbial sensor
  • JIS B 7981:2002 Automated measuring systems and analyzers for sulfur dioxide in flue gas
  • JIS K 2541-5:2003 Crude oil and petroleum products -- Determination of sulfur content Part 5: General bomb method
  • JIS K 3602 AMD 1:2006 Apparatus for the estimation of biochemical oxygen demand (BODs) with microbial sensor (Amendment 1)

Military Standard of the People's Republic of China-General Armament Department, Oxygen Bomb Oxygen Meter

  • GJB/J 5231-2003 Oxygen index meter calibration procedures
  • GJB 9828-2020 Specifications for test instruments for pilots' ability to withstand stress and hypoxia
  • GJB 985.1B-2020 Specification for high temperature resistant epoxy silicone coatings for ship missile launch systems
  • GJB 985.1-1990 Submarine missile launch system high temperature resistant coating epoxy silicone coating
  • GJB 985.1A-1997 Specification for high temperature resistant epoxy silicone coatings for ship missile launch systems
  • GJB 1595A-2021 Specification for high silica chopped fiber reinforced phenolic plastic molded products for missiles

工业和信息化部, Oxygen Bomb Oxygen Meter

  • JB/T 14242-2022 Online dissolved oxygen monitor
  • JB/T 20201-2021 Vaporized hydrogen peroxide concentration detector
  • HG/T 6116-2022 Determination of sulfur, fluorine and chlorine content in waste chemicals by oxygen bomb combustion ion chromatography

AENOR, Oxygen Bomb Oxygen Meter

  • UNE 51120:1985 OXIDATION STABILITY OF LUBRICATING GREASES BY THE OXYGEN BOMB METHOD, TEST FOR
  • UNE-EN 61207-3:2004 Gas analyzers - Expression of performance -- Part 3: Paramagnetic oxygen analyzers
  • UNE-ISO 15337:2010 Ambient air -- Gas phase titration -- Calibration of analysers for ozone

European Committee for Standardization (CEN), Oxygen Bomb Oxygen Meter

  • EN 865:1997 Pulse Oximeters - Particular Requirements
  • CEN/TS 17021:2017 Stationary source emissions - Determination of the mass concentration of sulphur dioxide by instrumental techniques
  • PD CEN/TS 17021:2017 Stationary source emissions - Determination of the mass concentration of sulphur dioxide by instrumental techniques
  • prEN 50104-1992 Electrical apparatus for the detection and measurement of oxygen; performance requirements and test methods
  • EN ISO 7759:2010 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer (ISO 7759:2010)
  • EN ISO 6719:2010 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments (ISO 6719:2010)

Instrument Society of America (ISA), Oxygen Bomb Oxygen Meter

  • ISA 92.04.01 PART I-2007 Performance Requirements for Instruments Used to Detect Oxygen-Deficient/ Oxygen-Enriched Atmospheres
  • ISA RP92.04.02 PART II-1996 Installation, Operation, and Maintenance of Instruments Used to Detect Oxygen-Deficient/Oxygen-Enriched Atmospheres

ISA - International Society of Automation, Oxygen Bomb Oxygen Meter

  • ISA 92.04.01 PART I-1996 Performance Requirements for Instruments Used to Detect Oxygen-Deficient/Oxygen-Enriched Atmospheres
  • ISA 92.02.01 PART I-1998 Performance Requirements for Carbon Monoxide Detection Instruments (50-1000 ppm Full Scale)

KR-KS, Oxygen Bomb Oxygen Meter

  • KS C 6594-2007(2023) Performance requirements for instruments used to detect oxygen-deficient/oxygen-enriched atmospheres
  • KS C 6595-2007(2023) Installation, operation and maintenance of instruments used to detect oxygen-deficient/oxygen-enriched atmospheres
  • KS B 5643-2003(2023) Continuous analyzers for oxidants in ambient air
  • KS B 5354-2018(2023) Continuous analyzers for dioxide sulfur in flue gas
  • KS I ISO 15337-2022 Ambient air — Gas phase titration — Calibration of analysers for ozone
  • KS I ISO 15337-2017 Ambient air－Gas phase titration－Calibration of analysers for ozone
  • KS C 6597-2007(2023) Installation, operation and maintenance of carbon monoxide detection instruments
  • KS C 6596-2007(2023) Performance requirements for carbon monoxide detection instrument(50∼1 000 ppm full scale)
  • KS P ISO 7767-2003 Oxygen monitors for monitoring patientbreathing mixtures－Safety requirements

Group Standards of the People's Republic of China, Oxygen Bomb Oxygen Meter

  • T/CEC 551-2021 Determination of Oxidation Stability of Power Oils Rotating Oxygen Bomb Test Method
  • T/CCFA 01050.2-2021 Zinc Oxide Antibacterial Polyester Part II: Zinc Oxide Antibacterial Polyester Low Elastic Yarn
  • T/HBJLXH 003-2022 Calibration Method of Free calcium oxide analyzer
  • T/CMA HG109-2023 Calibration Method for On-line Dissolved Oxygen Analyzer
  • T/QGCML 465-2022 Isolated compressed oxygen self-rescuer training and teaching equipment
  • T/ZJATA 0001-2021 Solid waste- determination of calorific value for sludge- bomb calorimetry
  • T/ZMDS 10011-2021 Method of measuring the parameters of near-infrared cerebral tissue oximeter
  • T/QAS 053-2021 TOC Meter Method for Determination of Chemical Oxygen Demand in High Chlorine Wastewater
  • T/NAIA 0138-2022 Determination method of calorific value of light liquid fuel oil (oxygen bomb calorimetry)
  • T/SHDSGY 123-2023 Technical specification for nitrogen oxide detection instruments in high-temperature boiler flue gas
  • T/GDCKCJH 065-2022 Performance requirements and test methods for DC parameter testers of zinc oxide lightning arrester
  • T/CASME 127-2022 Technical specification on operation and maintenance of water quality on-line automatic monitoring equipment of chemical oxygen demand
  • T/CAS 318-2018 Halogen content detection for polymers of wire and cable- Oxygen bomb-ion chromatography
  • T/CHIA 14.4-2018 Medical and Health IOT- Nomenclature Codes for Communication Data of Sensing Device- Part 4: Pulse Oximeter
  • T/CSES 43-2021 Technical specifications for online monitoring equipment of Biochemical Oxygen Demand based on in situ biofilm

GM Daewoo, Oxygen Bomb Oxygen Meter

Indonesia Standards, Oxygen Bomb Oxygen Meter

  • SNI 19-1498-1989 Continuous NO and NO2 test apparatus in exhaust-gases
  • SNI ISO 9918:2008 Safety requirement of capnometers use for human
  • SNI 19-7117.10-2005 Exhaust gas emissions - Stationary sources - Part 10: Test methods of CO, CO2 and O2 concentration using automatic analysis instrumentation

International Organization for Standardization (ISO), Oxygen Bomb Oxygen Meter

  • ISO 10216:2010 Anodizing of aluminium and its alloys - Instrumental determination of image clarity of anodic oxidation coatings - Instrumental method
  • ISO 10216:1992 Anodized aluminium and aluminium alloys; instrumental determination of image clarity of anodic oxidation coatings; instrumental method
  • ISO 10216:2017 Anodizing of aluminium and its alloys - Instrumental determination of image clarity of anodic oxidation coatings - Instrumental method
  • ISO 9918:1993 Capnometers for use with humans; requirements
  • ISO 10216:2010/Cor 1:2011 Anodizing of aluminium and its alloys — Instrumental determination of image clarity of anodic oxidation coatings — Instrumental method — Technical Corrigendum 1
  • ISO 6719:2010 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments
  • ISO 3930:1976 Road vehicles — Carbon monoxide analyser equipment — Technical specifications
  • ISO 8252:1987 Anodized aluminium and aluminium alloys; Measurement of mean specific abrasion resistance of anodic oxidation coatings with an abrasive jet test apparatus
  • ISO 7767:1988 Oxygen analyzers for monitoring patient breathing mixtures; safety requirements
  • ISO 23052:2020 Anodizing of aluminium and its alloys — Test method for chemical resistance of anodic oxidation coatings on aluminium and its alloys using electromotive force apparatus
  • ISO 9055:1988 Carbonaceous materials for the production of aluminium; pitch for electrodes; determination of sulfur content by the bomb method
  • ISO 7759:1983 Anodizing of aluminium and its alloys; Measurement of reflectivity characteristics of aluminium surfaces using abridged goniophotometer or goniophotometer
  • ISO 7759:2010 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer
  • ISO 14851:2019 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium — Method by measuring the oxygen demand in a closed respirometer
  • ISO 6719:1986 Anodized aluminium and aluminium alloys; Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments
  • ISO 1928:2009 Solid mineral fuels - Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value

American Society for Testing and Materials (ASTM), Oxygen Bomb Oxygen Meter

  • ASTM D942-02(2007) Standard Test Method for Oxidation Stability of Lubricating Greases by the Oxygen Pressure Vessel Method
  • ASTM D942-02 Standard Test Method for Oxidation Stability of Lubricating Greases by the Oxygen Bomb Method
  • ASTM E236-66(2006) Standard Specification for Apparatus For Microdetermination Of Alkoxyl Groups
  • ASTM D942-90(1995)e1 Standard Test Method for Oxidation Stability of Lubricating Greases by the Oxygen Bomb Method
  • ASTM D942-15 Standard Test Method for Oxidation Stability of Lubricating Greases by the Oxygen Pressure Vessel Method
  • ASTM E144-94(2001) Standard Practice for Safe Use Of Oxygen Combustion Bombs
  • ASTM E144-94(1995) Standard Practice for Safe Use Of Oxygen Combustion Bombs
  • ASTM E144-94(2011) Standard Practice for Safe Use of Oxygen Combustion Bombs
  • ASTM E144-94(2006)e1 Standard Practice for Safe Use of Oxygen Combustion Bombs
  • ASTM E236-66(2011) Standard Specification for Apparatus for Microdetermination of Alkoxyl Groups
  • ASTM D4871-00 Standard Guide for Universal Oxidation/Thermal Stability Test Apparatus
  • ASTM D4871-06 Standard Guide for Universal Oxidation/Thermal Stability Test Apparatus
  • ASTM D4871-11(2016) Standard Guide for Universal Oxidation/Thermal Stability Test Apparatus
  • ASTM D5011-92(2003) Standard Practices for Calibration of Ozone Monitors Using Transfer Standards
  • ASTM D5011-17 Standard Practices for Calibration of Ozone Monitors Using Transfer Standards
  • ASTM D129-00 Standard Test Method for Sulfur in Petroleum Products (General Bomb Method)
  • ASTM D129-00(2005) Standard Test Method for Sulfur in Petroleum Products (General Bomb Method)
  • ASTM D2272-98 Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel
  • ASTM D7528-09 Standard Test Method for Bench Oxidation of Engine Oils by ROBO Apparatus
  • ASTM D7528-13 Standard Test Method for Bench Oxidation of Engine Oils by ROBO Apparatus
  • ASTM D8455-22 Standard Test Method for Speciated Siloxane GC-IMS Analyzer Based On-line for Siloxane and Trimethylsilanol Content of Gaseous Fuels
  • ASTM D6522-00 Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
  • ASTM D6522-00(2005) Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
  • ASTM D6522-11 Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
  • ASTM D6522-20 Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Proce
  • ASTM D808-05 Standard Test Method for Chlorine in New and Used Petroleum Products (Bomb Method)
  • ASTM E357-98(2003)e1 Standard Test Method for Phosphorus in Organic Compounds by Sodium Peroxide Bomb Ignition
  • ASTM E357-98 Standard Test Method for Phosphorus in Organic Compounds by Sodium Peroxide Bomb Ignition
  • ASTM D4246-14(2020) Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation for Wire and Cable, 90 °C Operation
  • ASTM D2272-02 Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel
  • ASTM D7528-21 Standard Test Method for Bench Oxidation of Engine Oils by ROBO Apparatus
  • ASTM D7528-22 Standard Test Method for Bench Oxidation of Engine Oils by ROBO Apparatus
  • ASTM D7528-17 Standard Test Method for Bench Oxidation of Engine Oils by ROBO Apparatus
  • ASTM D7528-17a Standard Test Method for Bench Oxidation of Engine Oils by ROBO Apparatus
  • ASTM D752-73(1978) Standard test method for bench oxidation of engine oils using ROBO instruments
  • ASTM D4208-02(2007) Standard Test Method for Total Chlorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method
  • ASTM D4208-88(2002) Standard Test Method for Total Chlorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method
  • ASTM D3684-01 Standard Test Method for Total Mercury in Coal by the Oxygen Bomb Combustion/Atomic Absorption Method
  • ASTM D3684-94(2000) Standard Test Method for Total Mercury in Coal by the Oxygen Bomb Combustion/Atomic Absorption Method
  • ASTM D4208-02 Standard Test Method for Total Chlorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method
  • ASTM D3684-01(2006) Standard Test Method for Total Mercury in Coal by the Oxygen Bomb Combustion/Atomic Absorption Method
  • ASTM A799/A799M-04 Standard Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content
  • ASTM A799/A799M-04(2009) Standard Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content
  • ASTM A799/A799M-92(2002) Standard Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content
  • ASTM A799/A799M-92(1997) Standard Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content
  • ASTM A799/A799M-10(2020) Standard Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content
  • ASTM D4246-02 Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90176C Operation
  • ASTM D808-00 Standard Test Method for Chlorine in New and Used Petroleum Products (Bomb Method)
  • ASTM F2553-06 Standard Specification for Warnings on Refillable CO2 Cylinders Used In the Sport of Paintball
  • ASTM F2553-08 Standard Specification for Warnings on Refillable CO2 Cylinders Used In the Sport of Paintball
  • ASTM D4246-02(2010) Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90&176C Operation
  • ASTM F1366-92(1997)e1 Standard Test Method for Measuring Oxygen Concentration in Heavily Doped Silicon Substrates by Secondary Ion Mass Spectrometry
  • ASTM D4208-88(1997) Standard Test Method for Total Chlorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method
  • ASTM D4208-02e1 Standard Test Method for Total Chlorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method
  • ASTM D4208-13 Standard Test Method for Total Chlorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method
  • ASTM D7649-10 Standard Test Method for Determination of Trace Carbon Dioxide, Argon, Nitrogen, Oxygen and Water in Hydrogen Fuel by Jet Pulse Injection and Gas Chromatography/Mass Spectrometer Analysis

PL-PKN, Oxygen Bomb Oxygen Meter

United States Navy, Oxygen Bomb Oxygen Meter

IN-BIS, Oxygen Bomb Oxygen Meter

Hebei Provincial Standard of the People's Republic of China, Oxygen Bomb Oxygen Meter

  • DB13/T 5661-2023 Rapid Determination of Ash Content in Coal by Oxygen Bomb Method
  • DB13/T 2499.1-2017 Methods for the determination of liquid mixtures - Part 1: Determination of the calorific value of cartridges (bomb calorimetry)
  • DB13/T 5622-2022 Determination of Fluorine Content in Solid Biomass Fuel Oxygen Bomb Combustion-Ion Selective Electrode Method

British Standards Institution (BSI), Oxygen Bomb Oxygen Meter

  • BS ISO 10216:2010 Anodizing of aluminium and its alloys - Instrumental determination of image clarity of anodic oxidation coatings - Instrumental method
  • BS ISO 10216:2017 Anodizing of aluminium and its alloys. Instrumental determination of image clarity of anodic oxidation coatings. Instrumental method
  • BS 2000-142:1993 Methods of test for petroleum and its products - Determination of oxidation stability of lubricating grease - Oxygen bomb method
  • BS EN IEC 61207-3:2019 Tracked Changes. Gas Analyzers. Expression of performance. Paramagnetic oxygen analysers
  • BS ISO 15337:2009 Ambient air - Gas phase titration - Calibration of analysers for ozone
  • BS EN 17351:2020 Bio-based products. Determination of the oxygen content using an elemental analyser
  • BS EN 62703:2013 Expression of performance of fluorometric oxygen analyzers in liquid media
  • BS 2000-61:1993 Methods of test for petroleum and its products. Determination of sulfur. Bomb method
  • 19/30387008 DC BS EN 17351. Bio-based products. Determination of the oxygen content using an elemental analyser
  • 19/30371190 DC BS ISO 23052. Anodizing of aluminium and its alloy. Test methods of chemical resistance of anodic oxidation coatings on aluminium and its alloys using electromotive force apparatus
  • BS PD CEN/TS 17021:2017 Stationary source emissions. Determination of the mass concentration of sulphur dioxide by instrumental techniques
  • BS EN IEC 60746-4:2019 Expression of performance of electrochemical analyzers - Dissolved oxygen in water measured by membrane-covered amperometric sensors
  • BS EN ISO 6719:2010 Anodizing of aluminium and its alloys. Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments
  • BS EN 12373-12:2001 Aluminium and aluminium alloys - Anodizing - Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments

Association Francaise de Normalisation, Oxygen Bomb Oxygen Meter

  • NF X20-352:1976 Dioxide sulphur determination by mass spectrometry.
  • NF C46-251-3*NF EN IEC 61207-3:2019 Gas Analyzers - Expression of performance - Part 3 : paramagnetic oxygen analysers
  • NF EN IEC 61207-3:2019 Analyseurs de gaz - Expression des performances - Partie 3 : analyseurs d'oxygène paramagnétiques
  • NF A06-725:1992 Analyse chimique du cuivre - Dosage de l'oxygène - Méthode instrumentale.
  • NF E29-763:1991 VALVES AND GAS CYLINDERS. METHOD OF TEST FOR DETERMINATION OF THE SPONTANEOUS IGNITION TEMPERATURE OF NON-METALLIC MATERIALS IN PRESSURIZED GASEOUS OXYGEN. BOMB TESTS. VALVES AND GAS CYLINDERS. METHOD OF TEST FOR DETERMINATION OF THE SPONTANEOUS IGNITION
  • NF C46-253*NF EN 61207-3:2002 Gas analysers - Expression of performance - Part 3 : paramagnetic oxygen analysers.
  • NF C46-254*NF EN 62703:2013 Expression of performance of fluorometric oxygen analyzers in liquid media
  • NF X85-011*NF EN 17351:2020 Bio-based products - Determination of the oxygen content using an elemental analyser
  • NF EN 62703:2013 Expression des performances des analyseurs d'oxygène fluorométriques en milieu liquide
  • NF EN 17351:2020 Produits biosourcés - Détermination de la teneur en oxygène à l'aide d'un analyseur élémentaire
  • XP CEN/TS 17021:2018 Émissions de sources fixes - Détermination de la concentration massique en dioxyde de soufre par des techniques instrumentales
  • XP X43-043*XP CEN/TS 17021:2018 Stationary source emissions - Determination of the mass concentration of sulphur dioxide by instrumental techniques
  • NF M03-009:1990 Combustibles minéraux solides - Dosage du chlore total par combustion à la bombé à oxygène - Méthode à l'électrode spécifique des ions chlorure.
  • NF M03-064:2002 Combustibles minéraux solides - Dosage du fluor total par combustion à la bombe à oxygène - Méthode à l'électrode spécifique des ions fluorures
  • NF EN 1844:2013 Feuilles souples d'étanchéité - Détermination de la résistance à l'ozone - Feuilles d'étanchéité de toiture plastiques et élastomères
  • NF C23-570:2007 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen.
  • NF A91-488*NF EN ISO 6719:2010 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments
  • NF C23-570*NF EN 50270:2015 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
  • NF C46-252*NF EN 61207-2:1994 Expression of performance of gas analyzers. Part 2 : oxygen in gas (utilizing high-temperature electrochemical sensors).

Professional Standard - Petroleum, Oxygen Bomb Oxygen Meter

  • SY/T 6842-2011 Through-tube carbon/oxygen logging tool
  • SY 6842-2011 Through-tubing carbon-oxygen ratio energy spectrum logging tool
  • SY/T 5693-2008 Specification for calibration of the C/O spectrum logging tool
  • SY 5693-2008 Calibration specification for carbon-oxygen ratio energy spectrum logging tool
  • SY/T 5693-1995 Technical Regulations for Maintenance and Calibration of Carbon-Oxygen Ratio Spectrum Logging Tool

RU-GOST R, Oxygen Bomb Oxygen Meter

  • GOST ISO 9918-2012 Capnometers for use with humans. Requirements
  • GOST R ISO 9918-1999 Capnometers for use with humans. Requirements
  • GOST 18136-1972 Oils. Method for determination of oxidation stability in a universal apparatus
  • GOST 8.518-1984 State system for ensuring the uniformity of measurements. Ferritometers for austenite steel. Methods of verification
  • GOST R ISO 15337-2013 Ambient air. Gas phase titration. Calibration of analysers for ozone
  • GOST 31513-2012 Oxygen monitors for monitoring patient breathing mixtures. Safety requirements
  • GOST R 8.924-2016 State system for ensuring the uniformity of measurements. Ozone analyzers. Verification procedure
  • GOST R 8.754-2011 State system for ensuring the uniformity of measurements. Analyzers of oxygen dissolved in water. Verification procedure

GM North America, Oxygen Bomb Oxygen Meter

Taiwan Provincial Standard of the People's Republic of China, Oxygen Bomb Oxygen Meter

  • CNS 6360-1980 Method of Test for Sulfur in Petroleum Products(Oxygen Bomb Method)

Danish Standards Foundation, Oxygen Bomb Oxygen Meter

  • DS/ISO 10216:2011 Anodizing of aluminium and its alloys - Instrumental determination of image clarity of anodic oxidation coatings - Instrumental method
  • DS/EN 61207-3/Corr.2:2003 Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers
  • DS/EN 61207-3/Corr.1:2003 Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers
  • DS/EN 61207-3:2002 Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers
  • DS/EN 62703:2013 Expression of performance of fluorometric oxygen analyzers in liquid media
  • DS/ISO 7767:1989 Oxygen analyzers for monitoring patient breathing mixtures. Safety requirements
  • DS/EN ISO 4518:1995 Metallic coatings - Measurement of coating thickness - Profiliometric method
  • DS/EN ISO 21079-1:2008 Chemical analysis of refractories containing alumina, zirconia and silica - Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method) - Part 1: Apparatus, reagents and dissolution

National Metrological Technical Specifications of the People's Republic of China, Oxygen Bomb Oxygen Meter

  • JJF 1542-2015 Calibration Specification for SpO<下标2> Simulator
  • JJF 1714-2018 Program of Pattern Evaluation of Low-level Dissolved Oxygen Meters
  • JJF 1643-2017 Program of Pattern Evaluation for Chemical Oxygen Demand(COD)Meters
  • JJF 1873-2020 Calibration Specification for Diesel Vehicle Nitrogen Oxides(NOx) Measuring Instruments
  • JJF 1364-2012 Program of Pattern Evaluation of Sulfur Dioxide Gas Detectors
  • JJF 1441-2013 Program of Pattern Evaluation of Dissolved Oxygen Meter With Covered-Membrane-Electrode
  • JJF(机械) 1012-2018 Calibration specification for zinc oxide arrester leakage current tester
  • JJF(机械) 1070-2021 Calibration specification for zinc oxide surge arrester DC parameter tester
  • JJF(机械)1012-2018 Calibration specification for zinc oxide arrester leakage current tester
  • JJF(机械) 022-2008 Calibration specification for zinc oxide surge arrester leakage current measuring instrument
  • JJF(机械)1070-2021
  • JJF 1361-2012 Program on Pattern Evaluation of Chemiluminescent NO/NO Analyzers
  • JJF 1786-2019 Program of Pattern Evaluation of On-line Automatic Determinators for Chemical Oxygen Demand (COD)

Professional Standard - Ocean, Oxygen Bomb Oxygen Meter

API - American Petroleum Institute, Oxygen Bomb Oxygen Meter

  • API 4121-1971 IMPROVED INSTRUMENTATION FOR DETERMINATION OF EXHAUST GAS OXYGENATE CONTENT
  • API 4202-1973 PROGRAM FOR UPGRADING THE NO2 INSTRUMENTATION EMPLOYED IN THE 1972 CHATTANOOGA NO2 EXPOSURE STUDY
  • API 26-60051-1973 PROGRAM FOR UPGRADING THE NO2 INSTRUMENTATION EMPLOYED IN THE 1972 CHATTANOOGA NO2 EXPOSURE STUDY - FINAL REPORT
  • API 4237-1974 Program for Upgrading the NO2 Instrumentation Employed in the 1972-1973 Chattanooga NO2 Exposure Study - Final Report
  • API RP 550 P2 S5-1983 Manual on Installation of Refinery Instruments and Control Systems - Part 11-Process Stream Analyzers Section 5-0xygen Analyzers (FOURTH EDITION)

NL-NEN, Oxygen Bomb Oxygen Meter

  • NEN 961-1970 Petroleum products. Determination of sulfur by the bomb method

Professional Standard - Electricity, Oxygen Bomb Oxygen Meter

  • DL/T 433-2015 Determination of chlorine content in phosphate ester fire-resistant fluids (Bomb method)
  • DL 433-1992 Test method of chlorinity in fire resistant oil (oxygen steel bomb method)
  • DL/T 928-2005 The rule for the of PC bomb calorimeter performance
  • DL/T 1002-2006 Calibration for low-level dissolved oxygen meter.standard gases calibration
  • DL/T 661-1999 Technical requirements & test method for the safety of calorimeter bombs
  • DL/T 1857-2018 Determination of Chlorine Content in Coal Oxygen Bomb Combustion Ion Selective Electrode Method
  • DL/T 987-2005 General technical conditions of resistive current tester for zinc oxide surge arrester
  • DL/T 987-2017 General technical requirements for zinc oxide arrester resistive current tester
  • DL/T 1694.5-2017 Calibration specifications for high-voltage testing instruments and equipment Part 5: Zinc oxide arrester resistive current tester

AWS - American Welding Society, Oxygen Bomb Oxygen Meter

  • C4.1 SET-1977 Oxygen Cutting Surface Roughness Gauge and Chart for Criteria Describing Oxygen Cut Surfaces

German Institute for Standardization, Oxygen Bomb Oxygen Meter

  • DIN 19265:2007 pH-/redox-measurement - pH-/redox measuring apparatus - Technical requirements
  • DIN EN IEC 61207-3:2020-12 Gas Analyzers - Expression of performance - Part 3: Paramagnetic oxygen analysers (IEC 61207-3:2019); German version EN IEC 61207-3:2019 / Note: DIN EN 61207-3 (2002-11) and DIN EN 61207-3 Berichtigung 1 (2003-05) remain valid alongside this standard u...
  • DIN EN 17351:2020 Bio-based products - Determination of the oxygen content using an elemental analyser
  • DIN EN 17351:2020-04 Bio-based products - Determination of the oxygen content using an elemental analyser; German version EN 17351:2020
  • DIN IEC 60746-5:1996-07 Expression of performance of electrochemical analyzers - Part 5: Oxidation-reduction potential or redox potential (IEC 60746-5:1992)
  • DIN CEN/TS 17021:2017-05*DIN SPEC 33976:2017-05 Stationary source emissions - Determination of the mass concentration of sulphur dioxide by instrumental techniques; German version CEN/TS 17021:2017
  • DIN EN 62703:2014-12 Expression of performance of fluorometric oxygen analyzers in liquid media (IEC 62703:2013); German version EN 62703:2013
  • DIN IEC 60746-5:1996 Expression of performance of electrochemical analyzers - Part 5: Oxidation-reduction potential or redox potential (IEC 60746-5:1992)
  • DIN EN IEC 61207-3:2020 Gas Analyzers - Expression of performance - Part 3: Paramagnetic oxygen analysers (IEC 61207-3:2019); German version EN IEC 61207-3:2019
  • DIN EN 61207-3:2002 Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers (IEC 61207-3:2002); German version EN 61207-3:2002

AT-ON, Oxygen Bomb Oxygen Meter

  • ONORM C 9435-3-1994 Testing of elastomers - Determination of resistance to ozone cracking - Determination of the concentration of ozone (Reference method)
  • ONORM C 9435-1-1994 Testing of elastomers - Determination of resistance to ozone cracking - Static strain test
  • ONORM C 9435-2-1994 Testing of elastomers - Determination of resistance to ozone cracking - Dynamic stram test
  • ONORM M 9418-2001 Automatic concentration measuring instruments for carbon monoxide in garages - Specifications and testing

Professional Standard - Chemical Industry, Oxygen Bomb Oxygen Meter

Professional Standard - Military and Civilian Products, Oxygen Bomb Oxygen Meter

  • WJ 534-2007 Specification for heating oxide film layer of steel parts for shells, rockets, missiles, fuzes, and pyrotechnic products
  • WJ 535-2007 Specifications for Alkaline Oxidation Coatings of Steel Parts for Shells, Rockets, Missiles, Fuzes, and Explosives
  • WJ 1171-1994 Specification for GHJ-1 epoxy resin glue for optical instruments
  • WJ/Z 210-1986 Specifications for black oxidation of stainless steel for optical instruments
  • WJ 538-2007 Specifications for anodic oxidation coatings of shells, rockets, missiles, fuzes, aluminum and aluminum alloy parts for pyrotechnics
  • WJ 2261-1994 Verification rules for thermal conductivity and infrared absorption nitrogen and oxygen detectors
  • WJ 2017-1991 Aluminum and aluminum alloy hard anodized layer for military optical instruments
  • WJ 461-1995 Metal coating. Specifications for ferrous metal oxidizing coatings of optical instrument
  • WJ 462-1995 Specification for copper and copper alloy oxide coatings for chemically coated optical instruments
  • WJ 463-1995 Specification for aluminum and aluminum alloy anodic oxide coatings for optical instruments with electrochemical coatings

International Electrotechnical Commission (IEC), Oxygen Bomb Oxygen Meter

  • IEC 61207-3:2019 RLV Gas Analyzers - Expression of performance - Part 3: Paramagnetic oxygen analysers
  • IEC 61207-3:2019 Gas Analyzers - Expression of performance - Part 3: Paramagnetic oxygen analysers
  • IEC 61207-3:1998 Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers
  • IEC 62703:2013 Expression of performance of fluorometric oxygen analyzers in liquid media
  • IEC 61207-3:2002/COR2:2003 Gas analyzers - Expression of performance - Part 3：Paramagnetic oxygen analyzers; Technical Corrigendum 2
  • IEC 60746-5:1992 Expression of performance of electrochemical analyzers; part 5: oxidation-reduction potential or redox potential

European Committee for Electrotechnical Standardization（CENELEC）, Oxygen Bomb Oxygen Meter

  • EN IEC 61207-3:2019 Gas Analyzers - Expression of performance - Part 3: Paramagnetic oxygen analysers
  • EN 62703:2013 Expression of performance of fluorometric oxygen analyzers in liquid media

ES-UNE, Oxygen Bomb Oxygen Meter

  • UNE-EN IEC 61207-3:2019 Gas Analyzers - Expression of performance - Part 3: Paramagnetic oxygen analysers (Endorsed by Asociación Española de Normalización in October of 2019.)
  • UNE-EN 62703:2013 Expression of performance of fluorometric oxygen analyzers in liquid media (Endorsed by AENOR in October of 2013.)
  • UNE-EN 17351:2021 Bio-based products - Determination of the oxygen content using an elemental analyser

Professional Standard - Meteorology, Oxygen Bomb Oxygen Meter

  • QX/T 172-2012 Observation method of total column ozone with Brewer spectrophotometer

US-CFR-file, Oxygen Bomb Oxygen Meter

  • CFR 40-1065.284-2014 Protection of Environment. Part1065:Engine-testing procedures. Section1065.284:Zirconia (ZrO2) analyzer.

IT-UNI, Oxygen Bomb Oxygen Meter

Professional Standard - Environmental Protection, Oxygen Bomb Oxygen Meter

  • HJ/T 99-2003 The technical requirement for water quality automatic analyzer of dissolved oxygen(DO)
  • HJ/T 46-1999 Technical conditions of detector of sulphur dioxide concentration for constant potential electrolysis method
  • HJ 925-2017 Technical requirements and testing methods of portable dissolved oxygen meter
  • HJ 1045-2019 Technical requirements and testing methods for portable ultraviolet absorption measuring instruments for flue gas from stationary pollution sources (sulfur dioxide and nitrogen oxides)
  • HJ 377-2019 Technical requirements and detection methods of chemical oxygen demand (CODCr) water quality online automatic monitor

GB-REG, Oxygen Bomb Oxygen Meter

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Oxygen Bomb Oxygen Meter

  • GB/T 34692-2017 Thermoplastic elastomer—Determination of halogen—Oxygen bomb combustion-ion chromatography

Professional Standard - Navy, Oxygen Bomb Oxygen Meter

  • HJB 274-2003 Requirements for Destruction of Coastal Defense Missile Scrap Nitric Acid—20S

国家质量监督检验检疫总局, Oxygen Bomb Oxygen Meter

  • SN/T 4942-2017 Determination of the combustion heat value of biofuels Oxygen bomb calorimetry

Professional Standard - Non-ferrous Metal, Oxygen Bomb Oxygen Meter

  • YS/T 965-2014 Determinator for the reactivity to carbon dioxide of prebaked anodes used in the production of aluminium

AT-OVE/ON, Oxygen Bomb Oxygen Meter

  • OVE EN IEC 61207-3:2021 Gas Analyzers - Expression of performance - Part 3: Paramagnetic oxygen analysers (german version)

ES-AENOR, Oxygen Bomb Oxygen Meter

Professional Standard - Commodity Inspection, Oxygen Bomb Oxygen Meter

  • SN/T 4112-2015 Determination of combustion calorific value of polypropylene plastic - Oxygen bomb calorimetry
  • SN/T 3185-2012 Determination of halogen in crude oil.Oxygen bomb combustion-ion chromatography
  • SN/T 3128-2012 Determination of oxygen element in organic chemicals.Elemental analyzer method
  • SN/T 2087.2-2011 Determination of chlorine content in coal. Part 2:Combustion bomb-auto potentiometric titration method
  • SN/T 3596-2013 Test method for total fluorine in coal by the oxygen bomb combustion-ion selective electrode method
  • SN/T 3019.1-2011 Determination of halogen in electrical and electronic products.Part 1:Oxygen bomb combustion-Ion chromatography

Canadian Standards Association (CSA), Oxygen Bomb Oxygen Meter

CEN - European Committee for Standardization, Oxygen Bomb Oxygen Meter

  • PREN 17351-2019 Bio-based products - Determination of the oxygen content using an elemental analyser

Lithuanian Standards Office , Oxygen Bomb Oxygen Meter

  • LST EN 61207-3-2003 Gas analyzers. Expression of performance. Part 3: Paramagnetic oxygen analyzers (IEC 61207-3:2002)
  • LST EN ISO 21079-1:2008 Chemical analysis of refractories containing alumina, zirconia and silica - Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method) - Part 1: Apparatus, reagents and dissolution (ISO 21079-1:2008)

Professional Standard - Aviation, Oxygen Bomb Oxygen Meter

  • HB 7407-1996 Minimum performance requirements for civil aircraft carbon monoxide detectors

海关总署, Oxygen Bomb Oxygen Meter

  • SN/T 4763.2-2021 Determination of mercury content in coal Oxygen bomb combustion-atomic fluorescence spectrometry

Professional Standard - Grain, Oxygen Bomb Oxygen Meter

  • LS/T 6106-2012 Automatic Titration Analyzer Method for Determination of Peroxide Value of Animal and Vegetable Fats and Fats

SE-SIS, Oxygen Bomb Oxygen Meter

  • SIS SS 16 22 10-1986 Rubber and thermoplastic elastomer - Resistance to ozone cracking - Static strain test
  • SIS SS-ISO 6719:1988 Anodized aluminium and its alloys — Measurement of reflectance characteris-tics of aluminium surfaces using integra- ting-sphere instruments

National Association of Corrosion Engineers (NACE), Oxygen Bomb Oxygen Meter

  • NACE TM0192-2003 Evaluating Elastomeric Materials in Carbon Dioxide Decompression Environments Item No 21222
  • NACE TM0192-1992 Evaluating Elastomeric Materials in Carbon Dioxide Decompression Environments (Item No. 21222)
  • NACE TM0297-2002 Effects of High-Temperature, High-Pressure Carbon Dioxide Decompression on Elastomeric Materials Item No. 21229
  • NACE TM0297-2008 Effects of High-Temperature, High-Pressure Carbon Dioxide Decompression on Elastomeric Materials Item No. 21229
  • NACE TM0297-1997 Effects of High-Temperature, High-Pressure Carbon Dioxide Decompression on Elastomeric Materials (Item No. 21229)

Compressed Gas Association (U.S.), Oxygen Bomb Oxygen Meter

  • CGA G-6.6-2006 STANDARD FOR ELASTOMER-TYPE CARBON DIOXIDE BULK TRANSFER HOSE THIRD EDITION

Underwriters Laboratories (UL), Oxygen Bomb Oxygen Meter

  • UL 920401 BULLETIN-2017 UL Standard for Safety Performance Requirements for Instruments Used to Detect Oxygen-Deficient/Oxygen-Enriched Atmospheres (COMMENTS DUE: OCTOBER 9@ 2017)
  • UL 920401-2007 UL Standard for Safety Performance Requirements for Instruments Used to Detect Oxygen-Deficient/Oxygen-Enriched Atmospheres (First Edition; Reprint with Revisions Through and Including November 3@ 2017)

Jiangsu Provincial Standard of the People's Republic of China, Oxygen Bomb Oxygen Meter

  • DB32/T 3595-2019 Elemental analyzer method for the determination of carbon, hydrogen, nitrogen, sulfur and oxygen content in graphene materials

American Society of Mechanical Engineers (ASME), Oxygen Bomb Oxygen Meter

Standard Association of Australia （SAA）, Oxygen Bomb Oxygen Meter

Defense Logistics Agency, Oxygen Bomb Oxygen Meter

Association of German Mechanical Engineers, Oxygen Bomb Oxygen Meter

  • VDI 2453 Blatt 2-2002 Gaseous air pollution measurement - Measurement of concentration of nitrogen monoxide and nitrogen dioxide - Calibration of NO/NOx chemiluminescence analysers using gas phase titration

(U.S.) Ford Automotive Standards, Oxygen Bomb Oxygen Meter

Professional Standard - Geology, Oxygen Bomb Oxygen Meter

  • DZ 28.14-1984 Basic Environmental Test Conditions and Methods for Geological Instrument Products Sulfur Dioxide Test
  • DZ 0039.16-1992 Basic Environmental Test Conditions and Methods for Geological Instrument Products Sulfur Dioxide Test

VN-TCVN, Oxygen Bomb Oxygen Meter

  • TCVN 200-2011 Solid mineral fuels.Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value

GOSTR, Oxygen Bomb Oxygen Meter

  • GOST R 57224-2016 Рlastic materials. Determination of the ultimate aerobic biodegradability under controlled composting conditions. Method by using analysis of evolved carbon dioxide. Part 1. General method

CENELEC - European Committee for Electrotechnical Standardization, Oxygen Bomb Oxygen Meter

  • EN 50073:1999 Guide for Selection@ Installation@ Use and Maintenance of Apparatus for the Detection and Measurement of Combustible Gases or Oxygen

  oxygen bomb, Oxygen bomb combustion, oxygen bomb, rotary oxygen bomb, Halogen bomb, Oxygen bomb use, Oxygen Bomb Halogen, Oxygen bomb test, Oxygen bomb test, Oxygen bomb, Oxygen bomb burner, Oxygen bomb, Oxygen bomb, Oxygen bomb test, Oxygen bomb, Oxygen bomb, Oxygen Bomb Oxygen Meter, Oxygen bomb, Oxygen bomb calorific value meter, Oxygen bomb calorific value.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved