ZH
RU
ES
Infrared Spectroscopy Analysis Method
Infrared Spectroscopy Analysis Method, Total:500 items.
In the international standard classification, Infrared Spectroscopy Analysis Method involves: Analytical chemistry, Fuels, Optics and optical measurements, Lubricants, industrial oils and related products, Products of the textile industry, Electrical wires and cables, Standardization. General rules, Reinforced plastics, Water quality, Protection against fire, Materials for aerospace construction, Non-ferrous metals, Insulating fluids, Soil quality. Pedology, Cereals, pulses and derived products, Medical sciences and health care facilities in general, Electronic components in general, Education, Plastics, Rubber, Metalliferous minerals, Power stations in general, Rubber and plastics products, Geology. Meteorology. Hydrology, Wastes, Beverages, Burners. Boilers, Ferrous metals, Non-metalliferous minerals, Products of non-ferrous metals, Powder metallurgy, Construction materials, Testing of metals, Semiconducting materials, Optoelectronics. Laser equipment, Information sciences. Publishing, Nuclear energy engineering, Fibre optic communications, Iron and steel products, Paints and varnishes, Paint ingredients, Products of the chemical industry, Seals, glands, Shafts and couplings, Refractories, Particle size analysis. Sieving, Ferroalloys, Metrology and measurement in general, Jewellery, Air quality, Equipment for petroleum and natural gas industries, Milk and milk products, Petroleum products in general, Crude petroleum, Non-destructive testing, Woodworking equipment, Electricity. Magnetism. Electrical and magnetic measurements, Protection against crime, Natural gas.
国家市场监督管理总局、中国国家标准化管理委员会, Infrared Spectroscopy Analysis Method
- GB/T 6040-2019 General rules for infrared analysis
- GB/T 37969-2019 Standard guidelines for near infrared qualitative analysis
- GB/T 41072-2021 Surface chemical analysis—Electron spectroscopies—Guidelines for ultraviolet photoelectron spectroscopy analysis
- GB/T 37186-2018 Gas analysis—Determination of sulfur dioxide and nitrogen oxides—Ultraviolet differential optical absorption spectroscopy
- GB/T 16597-2019 Analytical methods of metallurgical products—General rule for X-ray fluorescence spectrometric methods
- GB/T 39540-2020 Fast determination of shale gas composition—Laser Raman spectroscopy
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Infrared Spectroscopy Analysis Method
- GB/T 6040-2002 General rules for infrared analysis
- GB/T 32199-2015 Infrared Spectroscopy Qualitative Analysis Technique General Rules
- GB/T 32198-2015 General Rules for Quantitative Analysis Techniques of Infrared Spectroscopy
- GB/T 7603-1987 Determination of the aromatic carbon content in mineral insulating oils by infrared spectrum method
- GB/T 5123-1985 Nickel--Method of spectral analysis
- GB/T 25930-2010 Test method of infrared gas analyzers
- GB/T 25481-2010 On-line ultraviolet/visible spectrum analyzer
- GB/T 16599-1996 Methods for emission spectrum analysis of molybdenum
- GB/T 16600-1996 Methods for emission spectrum analysis of tungsten
- GB/T 12152-1989 Analysis of water used in boiler and cooling system--Determination of mineral oil--Infrared photometric method
- GB/T 5871-1986 Method for spectrographic analysis of aluminium and its alloys
- GB/T 5678-1985 The method for sampling cast alloys for spectrochemical analysis
- GB/T 5678-2013 Sampling methods of spectrochemical analysis for cast alloys
- GB/T 11170-1989 Method for photoelectric emission spectroscopic analysis of stainless steel
- GB/T 26042-2010 Methods for analysis of zinc and zinc alloys.The optical emission spectrometry
- GB/T 18294.6-2012 Technical indentification methods for fire.Part 6:Infrared spectroscopy analysis
- GB/T 19627-2005 Particle size analysis-Photon correlation spectroscopy
- GB/T 8705.1-1988 Methods for chemical analysis of ferrophosphorus--The infrared absorption method for the determination of carbon content
- GB/T 8705.3-1988 Methods for chemical analysis of ferrophosphorus--The infrared absorption method for the determination of carbon content
- GB/T 5687.8-1988 Methods for chemical analysis of ferro-chromium--The infrared absorption method for the determination of sulfur content
- GB/T 4701.8-1988 Methods for chemical analysis of ferrotitanium--The infrared absorption method for the determination of carbon content
- GB/T 5059.9-1988 Methods for chemical analysis of ferromolybdenum--The infrared absorption method for the determination of sulfur content
- GB/T 4333.10-1990 Methods for chemical analysis of ferrosilicon--The infrared absorption method for the determination of carbon content
- GB/T 7731.10-1988 Methods for chemical analysis of ferrotungsten--The infrared absorption method for the determination of carbon content
- GB/T 4701.10-1988 Methods for chemical analysis of ferrotitanium--The infrared absorption method for the determination of sulfur content
- GB/T 5059.7-1988 Methods for chemical analysis of ferromolybdenum--The infrared absorption method for the determination of carbon content
- GB/T 5687.5-1988 Methods for chemical analysis of ferro-chromium--The infrared absorption method for the determination of carbon content
- GB/T 7731.12-1988 Methods for chemical analysis of ferrotungsten--The infrared absorption method for the determination of sulfur content
- GB/T 7999-2000 Standard method for direct reading spectromertric analysis of aluminum and its alloys
- GB/T 8654.8-1988 Methods for chemical analysis of manganese metal--The infrared absorption method for the determination of carbon content
- GB/T 8654.10-1988 Methods for chemical analysis of manganese metal--The infrared absorption method for the determination of sulfur content
- GB/T 4702.14-1988 Methods for chemical analysis of chromium metal--The infrared absorption method for the determination of carbon content
- GB/T 4702.16-1988 Methods for chemical analysis of chromium metal--The infrared absorption method for the determination of sulfur content
- GB 4702.14-1988 Metal Chromium Chemical Analysis Method Infrared Absorption Method Determination of Carbon Content
- GB/T 19500-2004 General rules for X-ray photoelectron spectroscopic analysis method
- GB/T 6041-2020 General rules for mass spectrometric analysis
- GB/T 6041-2002 General rules for mass spectrometric analysis
- GB/T 16597-1996 Analytical methods of metallurgical products. General rule for X-ray fluorescence spectrometric methods
- GB/T 7999-2015 Optical emission spectrometric analysis method of aluminum and aluminum alloys
- GB/T 7999-2007 Optical emission spectrometric analysis method of aluminum and aluminum alloys
- GB/T 4700.5-1998 Methods for chemical analysis of calcium-silicon The infrared absorption method for the determination of carbon content
- GB/T 5686.5-1988 Methods for chemical analysis of silicomanganese alloy--The infrared absorption method for the determination of carbon content
- GB/T 5686.7-1988 Methods for chemical analysis of silicomanganese alloy--The infrared absorption method for the determination of sulfur content
- GB/T 4699.6-1988 Methods for chemical analysis of silicochromium--The infrared absorption method for the determination of sulfur content
- GB/T 4699.4-1988 Methods for chemical analysis of silicochromium The infrared absorption method for the determination of carbon content
- GB/T 15337-1994 General rules for atomic absorption spectrometric analysis
- GB/T 15337-2008 General rules for atomic absorption spectrometric analysis
- GB 8150.3-1987 Methods for chemical analysis of xanthates--The infrared drying method for determination of moisture and volatile matter content
- GB/T 11462-1989 Test methods of spectrum analyzers
- GB/T 19502-2004 Surface chemical analysis-Glow discharge optical emission spectrometry(GD-OSE)-Introduction to use
- GB/T 6150.4-2008 Methods for chemical analysis of tungsten concentrates.Determination of sulfur content .The high frequency-infrared absorption method
- GB/T 13748.21-2009 Chemical analysis methods of magnesium and magnesium alloys.Part 21:Determination of elements by photoelectric direct reading atomic emission spectrometry
- GB/T 14849.6-2014 Methods for chemical analysis of silicon metal.Part 6:Determination of carbon.Infrared absorption method
Professional Standard - Commodity Inspection, Infrared Spectroscopy Analysis Method
- SN/T 3914-2014 General rules for infrared spectrometer in minerals
- SN/T 2083-2008 Method for analysis of brass.Spark discharge atomic emission spectrometric
- SN/T 2763.2-2012 Chemical analysis of laterite nickel ore.Part 2:Determination of nickel and cobalt content.Flame atomic absorption spectrometry
- SN/T 2079-2008 Method for analysis of stainless and alloy steels.X-ray fluorescence spectrometry
- SN/T 2785-2011 Photoelectric Emission Spectroscopic Analysis of Zinc and Zinc Alloys
- SN/T 2786-2011 Photoelectric Emission Spectroscopic Analysis of Magnesium and Magnesium Alloys
Professional Standard - Forestry, Infrared Spectroscopy Analysis Method
- LY/T 2053-2012 Standard method for near infrared qualitative analysis of Wood
- LY/T2053-2012 Standard method for mear infrarde qualitative analysis of wood
Japanese Industrial Standards Committee (JISC), Infrared Spectroscopy Analysis Method
- JIS K 0117:1990 General rules for infrared spectrophotometric analysis
- JIS K 0134:2002 General rules for near-infrared spectrophotometric analysis
- JIS K 0117:2000 General rules for infrared spectrophotometric analysis
- JIS K 0117:2017 General rules for infrared spectrophotometric analysis
- JIS H 1691:1968 Method for spectrochemical analysis of tantalum
- JIS K 6230:2006 Rubber -- Identification -- Infrared spectrometric method
- JIS K 6230:2018 Rubber -- Identification -- Infrared spectrometric methods
- JIS H 1683:2002 Tantalum -- Method for atomic absorption spectrometric analysis
- JIS H 1123:2021 Method for photoelectric emission spectrochemical analysis of lead metal
- JIS C 6183-1:2019 Optical spectrum analyzers -- Part 1: Test methods
- JIS G 1202:1975 General rules on emission-spectroscopic analysis for iron and steel
- JIS G 1257:1994 Iron and steel -- Methods for atomic absorption spectrometric analysis
- JIS G 1256 AMD 1:2010 Iron and steel -- Method for X-ray fluorescence spectrometric analysis (Amendment 1)
- JIS H 1303:1976 Method for emission spectrochemical analysis of aluminium ingot
- JIS H 1322:1976 Method for emission spectrochemical analysis of magnesium ingot
- JIS H 1163:1991 Method for photoelectric emission spectrochemical analysis of cadmium metal
- JIS H 1287:2015 Nickel and nickel alloys -- Methods for X-ray fluorescence spectrometric analysis
- JIS H 1113:2022 Method for photoelectric emission spectrochemical analysis of zinc metal
- JIS H 1183:2007 Method for emission spectrochemical analysis of silver bullion
- JIS H 1183 AMD 1:2012 Method for emission spectrochemical analysis of silver bullion (Amendment 1)
- JIS G 1251:1976 Emission-spectroscopic analysis for pig iron and cast iron
- JIS C 6183:1992 Test methods of fiber-optic spectrum analyzer
- JIS G 1256:1997 Iron and steel -- Method for X-ray fluorescence spectrometric analysis
- JIS H 1669:1990 Method for X-ray fluorescence spectrometric analysis of zirconium alloys
- JIS G 1351:1987 Method for X-ray fluorescence spectrometric analysis of ferroalloys
- JIS H 1306:1992 Methods for atomic absorption spectrometric analysis of aluminium and aluminium alloys
- JIS H 1630:1995 Method for atomic emission spectrometric analysis of titanium
- JIS H 1630:1975 Method for atomic emission spectrometric analysis of titanium
- JIS Z 8826:2005 Particle size analysis -- Photon correlation spectroscopy
- JIS H 1305:1976 Method for photoelectric emission spectrochemical analysis of aluminium and aluminium alloy
- JIS K 0190:2010 Microbeam analysis -- Electron probe microanalysis -- Guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry
- JIS H 1291:1977 Method for atomic absorption spectrochemical analysis of copper and copper alloys
- JIS H 1306:1999 Methods for atomic absorption spectrometric analysis of aluminium and aluminium alloys
- JIS G 1257 AMD 1:1999 Iron and steel -- Methods for atomic absorption spectrometric analysis (Amendment 1)
- JIS K 0121:1993 General rules for atomic absorption spectrochemical analysis
- JIS H 1305:2005 Method for optical emission spectrochemical analysis of aluminium and aluminium alloys
- JIS R 2216:2005 Methods for X-ray fluorescence spectrometric analysis of refractory products
(U.S.) Ford Automotive Standards, Infrared Spectroscopy Analysis Method
Group Standards of the People's Republic of China, Infrared Spectroscopy Analysis Method
- T/CPCIF 0185-2022 Rapid analysis method of automobile diesel fuels— Near infrared spectrometry
- T/CPCIF 0184-2022 Rapid analysis method of motor vehicle gasoline— Near infrared spectrometry
- T/CPCIF 0186-2022 Rapid analysis method of motor vehicle ethanol gasoline（E10）— Near infrared spectrometry
- T/HBFIA 0020-2021 Rapid determination of indicators of Laobaigan-flavored fermented grains by near-infrared spectroscopic analysis
- T/CPCIF 0187-2022 Rapid analysis method of diesel engines NOx reduction agent- aqueous urea solution（AUS 32)—Near infrared spectrometry
- T/CSTM 00011E-2021 General rules for original position statistic distribution analysis by laser induced breakdown spectroscopy
- T/CSTM 00011-2017 General Rules for In Situ Statistical Distribution Analysis Method of Laser Induced Breakdown Spectroscopy
Professional Standard - Petroleum, Infrared Spectroscopy Analysis Method
- SY/T 5121-1986 Infrared spectroscopic analysis method of rock organic matter and crude oil
国家能源局, Infrared Spectroscopy Analysis Method
- SY/T 5121-2021 Infrared spectroscopic analysis method of organic matter and crude oil in rocks
- SY/T 6679.4-2016 Comprehensive logging tool calibration method Part 4: Infrared gas analyzer
- SH/T 0940-2016 Test methods for analyzing in-service lubricants using specific four-in-one testers (atomic emission spectrometry, infrared spectroscopy, viscosity and laser particle counter)
- SY/T 7315-2016 Comprehensive two-dimensional gas chromatography component analysis method for condensate oil
Korean Agency for Technology and Standards (KATS), Infrared Spectroscopy Analysis Method
- KS M 0024-2017(2022) General rules for infrared spectrophotometric analysis
- KS M 0024-1997 General rules for infrared spectrophotometric analysis
- KS M 0024-2017 General rules for infrared spectrophotometric analysis
- KS M 0024-1987 General rules for infrared spectrophotometric analysis
- KS D 1681-2003 Method for emission spectrochemica1 analysis of aluminium ingot
- KS D 1684-2008 Methods for emission spectrographic analysis of magnesium ingot
- KS D 1682-2008 Methods for emission spectrochemical analysis of lead ingot
- KS D 2558-1995 Method for emission spectrographic analysis of tantalum
- KS D 1684-1993 Methods for emission spectrographic analysis of magnesium ingot
- KS D 1682-1993 Methods for emission spectrochemical analysis of lead ingot
- KS D 1684-1985 Methods for emission spectrographic analysis of magnesium ingot
- KS D 2569-2005 Methods for ICP emission spectrometric analysis of tantalum
- KS D 2569-2016 Methods for ICP emission spectrometric analysis of tantalum
- KS D 2553-2015(2020) Tantalum－Method for atomic absorption spectrometric analysis
- KS D 2568-2019 Tantalum－Method for atomic absorption spectrometric analysis
- KS D 2569-2016(2021) Methods for ICP emission spectrometric analysis of tantalum
- KS D 1682-2020 Method for photoelectric emission spectrochemical analysis of lead metal
- KS D 1681-1993 Method for emission spectrochemical analysis of aluminium ingot
- KS D 2086-1993 Methods for emission spectrochemical analysis of titanium
- KS C 6918-1995(2020) Test methods of fiber-optic spectrum analyzer
- KS D 1684-2008(2018) Methods for emission spectrographic analysis of magnesium ingot
- KS D 2086-2019 Methods for atomic emission spectrometric analysis of titanium
- KS D 2518-2015 Methods for photoelectric emission spectrochemical analysis of cadmium metal
- KS D 1655-1993 Method for X-Ray Fluorescence Spectrometric Analysis of Iron and Steel
- KS D 2086-2004 Method for atomic emission spectrometric analysis of titanium
- KS D 2518-2005 Methods for photoelectric emission spectrochemical analysis of cadmium metal
- KS C 6918-1995 Test methods of fiber-optic spectrum analyzer
- KS D 2518-1982 Methods for photoelectric emission spectrochemical analysis of cadmium metal
- KS L 3316-2014 Method for X-ray fluorescence spectrometric analysis of refractory products
- KS D 1686-2011(2021) Method for x-ray fluorescence spectrometric analysis of ferroalloys
- KS L 3316-2014(2019) Method for X-ray fluorescence spectrometric analysis of refractory products
- KS D 2518-2015(2020) Methods for photoelectric emission spectrochemical analysis of cadmium metal
- KS L 3316-1998 Method for X-ray fluorescence spectrometric analysis of refractory products
- KS L 3316-1988 Method for X-ray fluorescence spectrometric analysis of refractory products
- KS D 1899-2003 Methods for emission spectrochemical analysis of electrolytic cathode copper
- KS D 1683-1993 Method for emission spectrochemical analysis of silver ingot
- KS D 1681-2018 Method for emission spectrochemical analysis of aluminium ingot
- KS D 1680-2008 General rules for photographic emission spectrochemical analysis of metal materials
- KS D 2553-2015 Tantalum－Method for atomic absorption spectrometric analysis
- KS D 1685-1993 Methods for emission spectrochemical analysis of zinc metal
- KS D 1687-2007 Emission-spectroscopic analysis for pig iron and cast iron
- KS E 3076-2017 Methods for X－ray fluorescence spectrometric analysis of silica stone and silica sand
- KS D 1650-2008 General rules for photoelectric emission spectrochemical analysis of metal materials
- KS E 3076-2022 Methods for X-ray fluorescence spectrometric analysis of silica stone and silica sand
- KS D 1899-2019 Methods for photoelectric emission spectrochemical analysis of electrolytic cathode copper
- KS D 1929-2019 Methods for photoelectric emission spectrochemical analysis of die casting zinc alloys
- KS D 1929-2004 Methods for photoelectric emission spectrochemical analysis of die casting zinc alloys
- KS D 2597-1996(2021) Method for X-ray fluorescence spectrometric analysis of zirconium and zirconium alloys
- KS D 1679-1993 Methods for atomic absorption spectrometric analysis of aluminium and aluminium alloys
- KS D 2568-2008 Tantalum－Method for atomic absorption spectrometric analysis
- KS D 2710-2019 Methods for X-ray fluorescence spectrometric analysis of ferroniobium
- KS D ISO 22309-2011(2016) Microbeam analysis－Quantitative analysis using energy-dispersive spectrometry(EDS)
- KS D 1852-2005 Methods for photoelectric emission spectrochemical analysis of aluminium and aluminium alloys
- KS E 3075-2002 Method for X－ray fluorescence spectrometric analysis of limestone and dolomite
- KS D 1852-2015 Methods for photoelectric emission spectrochemical analysis of aluminium and aluminium alloys
- KS D 1852-2020 Methods for optical emission spectrochemical analysis of aluminium and aluminium alloys
- KS D 1655-2008(2019) Method for X-ray fluorescence spectrometric analysis of iron and steel
- KS D ISO 22309-2011(2021) Microbeam analysis－Quantitative analysis using energy-dispersive spectrometry(EDS)
- KS D 1929-2009 Methods for emission spectrochemical analysis of die casting zinc alloy
- KS D 1929-1993 Methods for Emission Spectrochemical Analysis of Die Casting Zinc Alloy
- KS D 1679-2008 Methods for atomic absorption spectrometric analysis of aluminium and aluminium alloys
- KS D 1899-1993 Methods for emission spectrochemical analysis of electrolytic cathode copper
- KS D 1652-2022 Iron and steel — Method for spark discharge atomic emission spectrometric analysis
- KS D 1652-2007(2017) Iron and steel－Method for spark discharge atomic emission spectrometric analysis
- KS D 1898-2019 Copper alloys —Methods for X-ray fluorescence spectrometric analysis
- KS M 0027-1993 General Rules for Analytical Methods in Gas Chromatography Mass Spectrometry
- KS D 1659-2008 Methods for atomic absorption spectrophotometric analysis of iron and steel
American Society for Testing and Materials (ASTM), Infrared Spectroscopy Analysis Method
- ASTM E168-92 Standard Practice for General Techniques of Infrared Quantitative Analysis
- ASTM E1252-98(2007) Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
- ASTM E2224-22 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
- ASTM E2224-23 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
- ASTM E2224-23a Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
- ASTM E2105-00(2016) Standard Practice for General Techniques of Thermogravimetric Analysis (TGA) Coupled With Infrared Analysis (TGA/IR)
- ASTM E2224-02 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
- ASTM E2224-23ae1 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
- ASTM D2124-99e1 Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique
- ASTM D2124-99(2004) Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique
- ASTM D2124-99(2011) Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique
- ASTM C1842-16 Standard Test Method for The Analysis of Boron and Silicon in Uranium Hexfluoride via Fourier-Transform Infrared (FTIR) Spectroscopy
- ASTM E2106-00 Standard Practice for General Techniques of Liquid Chromatography-Infrared (LC/IR) and Size Exclusion Chromatography-Infrared (SEC/IR) Analyses
- ASTM E2106-00(2006) Standard Practice for General Techniques of Liquid Chromatography-Infrared (LC/IR) and Size Exclusion Chromatography-Infrared (SEC/IR) Analyses
- ASTM E1915-05 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared Absorption Spectrometry
- ASTM E1915-99 Standard Test Method for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared Absorption Spectrometry
- ASTM E1915-01 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared Absorption Spectrometry
- ASTM E1915-07a Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared-Absorption Spectrometry
- ASTM E718-80 Method for Spectrographic Analysis of Cartridge Brass
- ASTM E1642-00(2005) Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis
- ASTM E1642-00 Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis
- ASTM C791-83(2000) Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Boron Carbide
- ASTM UOP841-83 Trans Olefins in Fatty Acids, Esters or Triglycerides by IR Spectroscopy
- ASTM E1915-07 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared-Absorption Spectrometry
- ASTM E29-90 Standard Practice for Using Digits in Test Data to Determine Conformance with Specifications
- ASTM E29-93a(1999) Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
- ASTM E2999-17 Standard Test Method for Analysis of Organic Compounds in Smokeless Powder by Gas Chromatography-Mass Spectrometry and Fourier Transform Infrared Spectroscopy
- ASTM E2106-00(2011) Standard Practice for General Techniques of Liquid Chromatography-Infrared (LC/IR) and Size Exclusion Chromatography-Infrared (SEC/IR) Analyses
- ASTM E1252-98 Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
- ASTM E1252-98(2002) Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
- ASTM E1252-98(2021) Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
- ASTM E1252-98(2013)e1 Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
- ASTM C696-11 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Uranium Dioxide Powders and Pellets
- ASTM E1835-14 Standard Test Method for Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry
- ASTM E2106-00(2019) Standard Practice for General Techniques of Liquid Chromatography-Infrared (LC/IR) and Size Exclusion Chromatography-Infrared (SEC/IR) Analyses
- ASTM D7417-10 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
- ASTM E1642-00(2010) Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis
- ASTM E1642-00(2016) Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis
- ASTM D7417-17 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
- ASTM D49-83(1996)e1 Standard Test Methods of Chemical Analysis of Red Lead
- ASTM D49-83(2020) Standard Test Methods of Chemical Analysis of Red Lead
German Institute for Standardization, Infrared Spectroscopy Analysis Method
- DIN 51820-1:1989 Testing of lubricants; analysis of greases by infrared spectrometry; taking and evaluating an infrared spectrum
- DIN 51820:2013-12 Testing of lubricants - Analysis of greases by infrared spectrometer - Recording and interpretation of an infrared spectrum / Note: Applies in conjunction with DIN 51451 (2004-09).
- DIN EN 6042:2021-08 Aerospace series - Organic compounds - Test method - Analysis by infrared spectroscopy; German and English version prEN 6042:2021 / Note: Date of issue 2021-07-16
- DIN 51820:2013 Testing of lubricants - Analysis of greases by infrared spectrometer - Recording and interpretation of an infrared spectrum
- DIN 51451:2020 Testing of petroleum products and related products - Analysis by infrared spectrometry - General working principles
- DIN 55673:2000 Paints, varnishes and their raw materials - Analysis by near infrared spectrometry - General working principles
- DIN 55673:2017 Paints, varnishes and their raw materials - Analysis by near infrared spectrometry - General working principles
- DIN 55673:2017-04 Paints, varnishes and their raw materials - Analysis by near infrared spectrometry - General working principles
- DIN 3761-14:1984 Rotary shaft lip type seals for automobils; test; infrared-spectroscopic analysis of elastomers
- DIN 51451:2020-02 Testing of petroleum products and related products - Analysis by infrared spectrometry - General working principles
- DIN 51451:2004 Testing of petroleum products and related products - Analysis by infrared spectrometry - General working principles
- DIN EN 480-6:2023-01 Admixtures for concrete, mortar and grout - Test methods - Part 6: Infrared analysis; German and English version prEN 480-6:2023 / Note: Date of issue 2022-12-09*Intended as replacement for DIN EN 480-6 (2005-12).
- DIN EN 480-6:2005-12 Admixtures for concrete, mortar and grout - Test methods - Part 6: Infrared analysis; German version EN 480-6:2005 / Note: To be replaced by DIN EN 480-6 (2023-01).
Professional Standard - Textile, Infrared Spectroscopy Analysis Method
- FZ/T 01144-2018 Near Infrared Spectroscopy for Quantitative Analysis of Textile Fibers
- FZ/T 01057.8-2012 Test method for identification of textile fibers.Part 8: Infrared absorption spectrum
Liaoning Provincial Standard of the People's Republic of China, Infrared Spectroscopy Analysis Method
- DB21/T 2079-2013 Polyvinyl chloride (PVC) cable material analysis - infrared spectroscopy
Taiwan Provincial Standard of the People's Republic of China, Infrared Spectroscopy Analysis Method
- CNS 13105-1992 General Rules for Infrared Spectrophotometric Analysis
- CNS 12416-1988 Genenral Rules for Emission Spectroscopic Analysis
- CNS 14896-14-2005 Titanium - Method for atomic emission spectrometric analysis
- CNS 14896.14-2005 Titanium - Method for atomic emission spectrometric analysis
- CNS 10006-1984 Method for Photoelectric Emission Spectrochemical Analysis of Iron And Steel
- CNS 11209-1995 General Rules for Chemical Analysis by Atomic Absorption Spectrophotometry
- CNS 9705-1984 General Rules for Emission-Spectroscopic Analysis of Iron and Steel
- CNS 10503-1984 Emission-Spectroscopic Analysis for Pig Iron and Cast Iron
- CNS 11206-2002 Iron and steel─Methods for atomic absorption spectrometric analysis
RU-GOST R, Infrared Spectroscopy Analysis Method
AT-ON, Infrared Spectroscopy Analysis Method
- ONORM M 6608-1996 Water analysis - Determination of hydrocarbons by infrared spectrometry
- OENORM EN 6042-2021 Aerospace series - Organic compounds - Test method - Analysis by infrared spectroscopy
NL-NEN, Infrared Spectroscopy Analysis Method
- NEN 6302-1980 Test methods for vegetable and animal oils and fats - Preparation of methyl esters for gaschromatography and infrared spectrophotometry
European Committee for Standardization (CEN), Infrared Spectroscopy Analysis Method
- prEN 6042-2021 Aerospace series - Organic compounds - Test method - Analysis by infrared spectroscopy
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Infrared Spectroscopy Analysis Method
- PREN 6042-1995 Aerospace Series Organic Compounds Test Method Analysis by Infrared Spectroscopy (Edition P1)
British Standards Institution (BSI), Infrared Spectroscopy Analysis Method
- DD 220-1994 Soil quality. Determination of mineral oil content. Method by infrared spectrometry and gas chromatographic method
- BS EN 15948:2020 Cereals. Determination of moisture and protein. Method using Near-Infrared Spectroscopy in whole kernels
- 21/30437727 DC BS EN 6042. Aerospace series. Organic compounds. Test method. Analysis by infrared spectroscopy
- 18/30374728 DC BS EN 15948. Cereals. Determination of moisture and protein. Method using Near-Infrared-Spectroscopy in whole kernels
- BS ISO 4650:2006 Rubber - Identification - Infrared spectrometric method
- BS ISO 4650:2012 Rubber. Identification. Infrared spectrometric methods
- BS 5849:1980 Method of expression of performance of air quality infra-red analysers
- BS ISO 11938:2012 Microbeam analysis. Electron probe microanalysis. Methods for elemental-mapping analysis using wavelength-dispersive spectroscopy
- BS 7020-9.1:1989 Analysis of iron ores - Methods for the determination of manganese content - Spectrophotometric method
- BS ISO 11938:2013 Microbeam analysis. Electron probe microanalysis. Methods for elemental-mapping analysis using wavelength-dispersive spectroscopy
- BS DD ISO/TS 25138:2011 Surface chemical analysis. Analysis of metal oxide films by glow-discharge optical-emission spectrometry
- BS ISO 10810:2010 Surface chemical analysis. X-ray photoelectron spectroscopy. Guidelines for analysis
- BS EN 61290-5-1:2006 Optical amplifiers - Test methods - Reflectance parameters - Optical spectrum analyzer method
- BS ISO 19087:2018 Workplace air. Analysis of respirable crystalline silica by Fourier-Transform Infrared spectroscopy
- BS ISO 18554:2016 Surface chemical analysis. Electron spectroscopies. Procedures for identifying, estimating and correcting for unintended degradation by X-rays in a material undergoing analysis by X-ray photoelectron spectroscopy
NO-SN, Infrared Spectroscopy Analysis Method
- NS 9803-1993 Water analysis. Determination of oil in water. Infrared spectrophotometric method
- NS 9804-1993 Water analysis. Determination of fat in wastewater from food processing industries. Infrared spectrophotometric method
Professional Standard - Electron, Infrared Spectroscopy Analysis Method
- SJ 2656-1986 Mothod of tungsten spectral analysis
- SJ 2657-1986 Mothod of molybdeuum spectral analysis
- SJ 20744-1999 General rule of infrared absorption spectral analysis for the impurity concentration in semiconductor materials
- SJ/Z 3206.10-1989 General rules for analysis of properties of emision spectrum
- SJ/Z 3206.11-1989 General rules for analysis of quantities of emision spectrum
- SJ/Z 1544-1979 Method for spectral analysis of Nickel-- Tungsten-Magnesium alloy
- SJ/Z 3206.8-1989 Geneeral rules for preparation of standard sample for spectrum analysis
- SJ/Z 3206.12-1989 General rules for emission spectrum analysis for vacuum materials
- SJ/Z 3206.13-1989 General rules for emision spectrum analysis for semiconductor materials
IN-BIS, Infrared Spectroscopy Analysis Method
BE-NBN, Infrared Spectroscopy Analysis Method
- NBN T 91-502-1977 Water analysis methods - Determination of hydracarbons by infrared spectrophotometry
- NBN T 91-501-1975 Water analysis methods - Determination of hydracarbons by infrared spectrophotometry
GOSTR, Infrared Spectroscopy Analysis Method
- GOST R 57987-2017 Polymer composites. Infrared spectroscopy. Multivariate quantitative analysis
- GOST 9716.3-1979 Copper-zinc alloys. Method of spectral analysis of oxide spesimens with photographic registration of spectrum
- GOST 9716.1-1979 Copper-zinc alloys. Method of spectral analysis of metal standard spesimens with photographic registration of spectrum
SE-SIS, Infrared Spectroscopy Analysis Method
Professional Standard - Education, Infrared Spectroscopy Analysis Method
- JY/T 0571-2020 General Rules of Fluorescence Spectroscopy Analysis Methods
- JY/T 0570-2020 General rules for ultraviolet and visible absorption spectrometry
- JY/T 0566-2020 General rules for atomic fluorescence spectrometry
- JY/T 0573-2020 General Rules of Laser Raman Spectroscopy Analysis Method
- JY/T 002-1996 General Rules for Laser Raman Spectroscopy Analysis Methods
- JY/T 0572-2020 General Rules for Analytical Methods of Circular Dichroism Spectroscopy
- JY/T 0565-2020 General rules for electrothermal atomic absorption spectrometry
European Association of Aerospace Industries, Infrared Spectroscopy Analysis Method
- AECMA PREN 6042-1995 Aerospace Series Organic Compounds Test Method Analysis by Infrared Spectroscopy Edition P1
Association Francaise de Normalisation, Infrared Spectroscopy Analysis Method
- NF T46-054*NF ISO 4650:2013 Rubber - Identification - Infrared spectrometric methods
- NF EN 1767:1999 Produits et systèmes pour la protection et la réparation des structures en béton - Méthodes d'essais - Analyse par spectrométrie infrarouge
- NF ISO 4735:2002 Huiles essentielles de Citrus - Détermination de la valeur CD par analyse spectrométrique dans l'ultraviolet
- NF ISO 19702:2016 Lignes directrices pour l'analyse des gaz et des vapeurs dans les effluents du feu par spectroscopie infrarouge à transformée de Fourier (IRTF)
- NF X21-013*NF ISO 11938:2012 Microbeam analysis - Electron probe microanalysis - Methods for elemental-mapping analysis using wavelength-dispersive spectroscopy.
- NF EN 480-6:2006 Adjuvants pour béton, mortier et coulis - Méthodes d'essai - Partie 6 : analyse infrarouge
- NF X20-301:1978 Gas analysis by absorption of a non dispersive infra-red radiation beam.
- NF X21-003:2006 Microbeam analysis - Electron probe microanalysis - Guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry.
- NF C93-805-5-1*NF EN 61290-5-1:2006 Optical amplifier test methods - Part 5-1 : reflectance parameters - Optical spectrum analyser method
- NF ISO 11938:2012 Analyse par microfaisceaux - Analyse par microsonde électronique (microsonde de Castaing) - Méthodes d'analyse par cartographie élémentaire en utilisant la spectrométrie à dispersion de longueur d'onde
- NF X21-071:2011 Surface Chemical Analysis - X-ray photoelectron Spectroscopy - Guidelines for analysis.
Professional Standard - Non-ferrous Metal, Infrared Spectroscopy Analysis Method
- YS/T 820.16-2012 Methods for chemical analysis of laterite nickel ores.Part 16:Determination of carbon and sulfur content.High frequency combustion with infrared absorption spectrometry
- YS/T 631-2007 Methods for analysis of zinc.The optical emission spectrometry
- YS/T 558-2009 Methods for emission spectrum analysis of molybdenum
- YS/T 559-2009 Methods for emission spectrum analysis of tungsten
- YS/T 558-2006 Molybdenum Emission Spectroscopy Analysis Method
- YS/T 559-2006 Tungsten Emission Spectroscopy Analysis Method
- YS/T 1047.4-2015 Methods for chemical analysis of copper magnetite.Part 4:Determination of sulfur content.High frequency combustion with infrared absorption method
- YS/T 464-2003 Methods for analytical of copper cathode-The optical emission spectrometry
- YS/T 482-2005 Methods for analysis of copper and copper alloys-The atomic emission spectrometry
- YS/T 820.18-2012 Methods for chemical analysis of laterite nickel ores.Part 18:Determination of mercury conten.Cold atomic absorption spectrometry
- YS/T 820.15-2012 Methods for chemical analysis of laterite nickel ores.Part 15:Determination of cadmium content.Flame atomic absorption spectrometry
- YS/T 820.1-2012 Methods for chemical analysis of laterite nickel ores.Part 1：Determination of nikel content.Flame atomic absorption spectrometry
- YS/T 820.5-2012 Methods for chemical analysis of laterite nickel ores.Part 5:Determination of cobalt content.Flame atomic absorption spectrometry
- YS/T 820.6-2012 Methods for chemical analysis of laterite nickel ores.Part 6:Determination of copper content.Flame atomic absorption spectrometry
- YS/T 820.12-2012 Methods for chemical analysis of laterite nickel ores.Part 12:Determination of manganese content.Flame atomic absorption spectrometry
- YS/T 820.13-2012 Methods for chemical analysis of laterite nickel ores.Part 13:Determination of lead content.Flame atomic absorption spectrometry
- YS/T 820.14-2012 Methods for chemical analysis of laterite nickel ores.Part 14:Determination of zinc content.Flame atomic absorption spectrometry
- YS/T 1036-2015 Test method of optical emission spectrometric analysis of magnesium rare earth alloys
- YS/T 820.17-2012 Methods for chemical analysis of laterite nickel ores.Part 17:Determination of arsenic,antimony and bismuth contents.Hydride generation-atomic fluorescence spectrometry
- YS/T 820.7-2012 Methods for chemical analysis of laterite nickel ores.Part 7:Determination of calcium and magnesium content.Flame atomic absorption spectrometry
- YS/T 820.4-2012 Methods for chemical analysis of laterite nickel ores.Part 4:Determination of phosphorus content.Phosphorus molybdenum blue spectrophotometry
- YS/T 514.3-2009 Methods for chemical analysis of high-titanium slag and rutile.Part 3:Determination of sulfur content.High frequency infrared absorption method
- YS/T 514.10-2009 Methods for chemical analysis of high-titanium slag and rutile.Part 10:Determination of carbon content.High frequency infrared absorption method
- YS/T 536.7-2009 Methods for chemical analysis of bismuth.Determination of arsenic content.Atomic fluorescence spectrometric method
- YS/T 536.11-2009 Methods for chemical analysis of bismuth.Determination of mercury content.Atomic fluorescence spectrometric method
- YS/T 281.20-2011 Methods for chemical analysis of cobalt.Part 20：Determination of oxide content.Impulse infrared absorption
- YS/T 271.3-1994 Chemical Analysis Method of Xanthate Determination of Moisture and Volatile Content by Infrared Drying Method
- YS/T 426.7-2000 Method for chemical analysis of antimony-beryllium pellets.Determination of carbon content.High frequency-infrared absorption method
- YS/T 273.14-2008 Chemical analysis methods and determination of physical performance of synthetic cryolite.Part 14: X-ray fluorescence spectrometric method for the determination of elements content
- YS/T 581.10-2006 Determination of chemical contents and physical properties of aluminium fluoride Part 10:Determination of sulphur content by X-ray fluorescence spectrometric method
- YS/T 273.11-2006 Chemical analysis methods and physical properties of cryolite. Part 11:Determination of sulphur content by X-ray fluorescence spectrometric method
Professional Standard - Electricity, Infrared Spectroscopy Analysis Method
- DL/T 919-2005 Determination of mineral oil content in sulphur hexafluoride by infrared spectrum method
- DL/T 568-1995 Fast test methods for ultimate analysis of fuel by infrared absorption & thermal conductivity
Professional Standard - Machinery, Infrared Spectroscopy Analysis Method
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Infrared Spectroscopy Analysis Method
- GB/T 17923-2017 Analytical method for oily sewage from marine petroleum development industry—Infrared spectrophotometry
- GB/T 10574.12-2017 Methods for chemical analysis of tin-lead solders—Part 12：Determination of sulfur content—High frequency combustion with infrared absorption method
- GB/T 32996-2016 Surface chemical analysis—Analysis of metal oxide films by glow-discharge optical emission spectrometry
International Electrotechnical Commission (IEC), Infrared Spectroscopy Analysis Method
- IEC 62129:2006 Calibration of optical spectrum analyzers
- IEC 60528:1975 Expression of performance of air quality infra-red analyzers
- IEC 61290-5-1:2006 Optical amplifiers - Test methods - Part 5-1: Reflectance parameters - Optical spectrum analyser method
Aerospace, Security and Defence Industries Association of Europe (ASD), Infrared Spectroscopy Analysis Method
- ASD-STAN PREN 6042-1995 Aerospace Series Organic Compounds Test Method Analysis by Infrared Spectroscopy (Edition P1)
Professional Standard - Geology, Infrared Spectroscopy Analysis Method
- DZ/T 0279.25-2016 Methods of Analysis of Regional Geochemical Samples Part 25: Combustion for Carbon Determination - Infrared Absorption Spectroscopy
- DZ/T 0064.46-2021 Methods of Analytical Groundwater Quality Part 46: Determination of Bromide Spectrophotometric Method with Bromophenol Red
未注明发布机构, Infrared Spectroscopy Analysis Method
- BS 5849:1980(1999)*IEC 528:1975 Method of Expression of performance of air quality infra - red analysers [ IEC title : Expression of performance of air quality infra - red analyzers ]
- DIN EN 480-6:1997 Admixtures for concrete, mortar and grout — Test methods — Part 6: Infrared analysis
CZ-CSN, Infrared Spectroscopy Analysis Method
- CSN 42 0600 Cast.3-1975 Antimony of high parity. Methods of chemical and spectral analysis. Delermmation of arsenic by photomotric metod
- CSN 42 0600 Cast.2-1975 Antimony of high purity. Methods of chemical and spectral analysis. Preparation of the sample
- CSN 42 0600 Cast.5-1975 Antimony of high purity. Methods of chemical and spectral analysis. Dctermination of silver, bismuth. copper, iron. nickel, lead. and tin by spectral method
- CSN 42 0600 Cast.1-1975 Antimony of high purity. Methods of chemical and spectral analysis General data
- CSN 42 0600 Cast.4-1975 Antimony of high purity. Method of chemical and spectral anaysis.Determination of sulfur by aombustion method
International Organization for Standardization (ISO), Infrared Spectroscopy Analysis Method
- ISO 4650:2005 Rubber - Identification - Infrared spectrometric method
- ISO 4650:1984 Rubber; Identification; Infra-red spectrometric method
- ISO 4650:2012 Rubber - Identification - Infrared spectrometric methods
- ISO 19087:2018 Workplace air - Analysis of respirable crystalline silica by Fourier-Transform Infrared spectroscopy
- ISO 11938:2012 Microbeam analysis - Electron probe microanalysis - Methods for elemental-mapping analysis using wavelength-dispersive spectroscopy
- ISO 17470:2004 Microbeam analysis - Electron probe microanalysis - Guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry
- ISO 18554:2016 Surface chemical analysis - Electron spectroscopies - Procedures for identifying, estimating and correcting for unintended degradation by X-rays in a material undergoing analysis by X-ray photoelectron spectroscopy
工业和信息化部, Infrared Spectroscopy Analysis Method
- YS/T 1332.3-2019 Methods for chemical analysis of crude copper and cobalt raw materials Part 3: Determination of sulfur content High frequency combustion-infrared spectroscopy
- YS/T 464-2019 Direct reading spectroscopic analysis method of copper cathode
- YS/T 1057.5-2022 Methods for chemical analysis of cobalt tetroxide Part 5: Determination of carbon content High-frequency combustion-infrared absorption spectrometry
- YS/T 1230.4-2018 Methods for chemical analysis of copper anodes Part 4: Determination of oxygen content by pulsed infrared method
- YS/T 1550.4-2022 Methods for chemical analysis of beryllium alloys Part 4: Determination of carbon content by infrared absorption method
The American Road & Transportation Builders Association, Infrared Spectroscopy Analysis Method
AASHTO - American Association of State Highway and Transportation Officials, Infrared Spectroscopy Analysis Method
Guangdong Provincial Standard of the People's Republic of China, Infrared Spectroscopy Analysis Method
- DB44/T 1602-2015 Analysis Method of Stone Composition--X-ray Fluorescence Spectrometry
Professional Standard - Ferrous Metallurgy, Infrared Spectroscopy Analysis Method
- YB/T 4177-2008 Determination of chemical composition in stag by X-ray fluorescence spectrometry
- YB/T 5339-2006 Ferrophosphorus Chemical Analysis Method Infrared Absorption Method Determination of Carbon Content
- YB/T 5341-2006 Ferrophosphorus Chemical Analysis Method Infrared Absorption Method Determination of Sulfur Content
- YB/T 191.7-2001 Methods for chemical analysis of chromium ores----The infrared absorption method for the determination of sulfur content
- YB/T 109.6-1997 Methods for chemical analysis of barium-silicon the infrared absorption method for the determination of carbon content
- YB/T 109.7-1997 Methods for chemical analysis of barium-silicon the infrared absorption method for the derermination of sulfur content
- YB/T 5316-2006 Calcium silicon alloy chemical analysis method Infrared absorption method for determination of carbon content
Professional Standard - Petrochemical Industry, Infrared Spectroscopy Analysis Method
- NB/SH/T 0853-2010 Standard practice for condition monitoring of used lubricants by trend analysis using fourier transform infrared(FT-IR)spectrometry
YU-JUS, Infrared Spectroscopy Analysis Method
- JUS G.S1.510-1997 Plastics - Analysis of components in polyvinyl chloride) compounds - Infrared spectrofotometric method
- JUS C.A1.360-1977 Methods for chemical analysis of zine and zine alloys. Determination of group of elements - spectrographic analysis
- JUS C.A1.650-1987 Methodes of chemical analysis of silver. Determination of impurities contents. Spectrographic metod".
Professional Standard - Chemical Industry, Infrared Spectroscopy Analysis Method
- HG/T 2954~2955-2008 Standard writing format for atomic absorption spectroscopic analysis method Standard writing format for molecular absorption spectroscopic analysis method
- HG/T 2955-2008 Layouts for standards of molecular absorption spectrometric analysis
- HG/T 2955-1989(1997) Rules for drafting molecular absorption spectrometry analysis standards
- HG/T 2954-2008 Layouts for standard of atomic absorption spectrometric analysis
国家文物局, Infrared Spectroscopy Analysis Method
- WW/T 0087-2018 Determination of aging degree of silk fabrics in collections using Fourier transform infrared spectroscopic analysis
Professional Standard - Aerospace, Infrared Spectroscopy Analysis Method
- QJ 2838.2-1996 Methylhydrazine Purity and Moisture Analysis Method Methylhydrazine Moisture Gas Chromatography Analysis Method (External Standard Method)
- QJ 2673-1994 Random Sequence Spectrum Analysis Method
Professional Standard - Agriculture, Infrared Spectroscopy Analysis Method
- SN/T 5566-2023 General Rules of Laser Micro Raman Spectroscopy Analysis Method
- 773兽药典 二部-2015 Appendix Contents 0400 Spectroscopy 0402 Infrared Spectrophotometry
- 776兽药典 一部-2015 Appendix Contents 0400 Spectroscopy 0402 Infrared Spectrophotometry
Standard Association of Australia （SAA）, Infrared Spectroscopy Analysis Method
- AS/NZS 1050.32:1994 Methods for the analysis of iron and steel - Determination of carbon content - Infrared method
- AS 1038.6.3.3:1997(R2013)
- AS 2300.1.8.2:1991 Methods of chemical and physical testing for the dairying industry - General methods and principles - Assessment of instrumental methods - Infrared spectrometric analysis of milk
- AS/NZS 1050.18:1994 Methods for the analysis of iron and steel - Determination of phosphorus - Spectrophotometric method
- AS/NZS 1050.8:1994 Methods for the analysis of iron and steel - Determination of manganese content (spectrophotometric method)
- AS/NZS 1050.21:1994 Methods for the analysis of iron and steel - Determination of cobalt content (spectrophotometric method)
- AS/NZS 1050.24:1994 Methods for the analysis of iron and steel - Determination of aluminium content (spectrophotometric method)
- AS/NZS 1050.27:1994 Methods for the analysis of iron and steel - Determination of titanium content (spectrophotometric method)
- AS 3587.5:1998 Ferroalloys - Chemical analysis - Determination of sulfur content - Infrared method
- AS 3587.4:1998 Ferroalloys - Chemical analysis - Determination of carbon content - Infrared method
Henan Provincial Standard of the People's Republic of China, Infrared Spectroscopy Analysis Method
- DB41/T 1050-2015 Ferrosilicon Chemical Analysis Method Infrared Absorption Method for Determination of Sulfur Content
Indonesia Standards, Infrared Spectroscopy Analysis Method
- SNI 06-2482-1991 Water, Test method for flouride content by spectrophotometer in a red alazaryn manuver
- SNI 06-2505-1991 Water, Test methods for total organic carbon content by infrared KOT analyzers
Professional Standard - Aviation, Infrared Spectroscopy Analysis Method
- HB 5219.11-1998 Chemical Analysis Methods of Magnesium Alloys - Determination of Nickel Content by Atomic Absorption Spectrometry
- HB 5219.13-1998 Magnesium Alloy Chemical Analysis Methods Atomic Absorption Spectroscopic Analysis Determination of Zinc Content
- HB 5219.20-1998 Methods of chemical analysis of magnesium alloys - Determination of silver content by atomic absorption spectrometry
- HB 5219.3-1998 Methods of chemical analysis of magnesium alloys - Determination of copper content by atomic absorption spectrometry
- HB 5219.8-1998 Methods of chemical analysis of magnesium alloys - Determination of manganese content by atomic absorption spectrometry
- HB 5219.5-1998 Methods of chemical analysis of magnesium alloys - Determination of iron content by atomic absorption spectrometry
- HB 5218.22-1995 Aluminum Alloy Chemical Analysis Method Magenta Photometry Determination of Boron Content
Professional Standard - Energy, Infrared Spectroscopy Analysis Method
- NB/SH/T 0940-2016 Test method for the analysis of in-use lubricants using a specific 4-in-1 tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity and Laser Particle Counter)
CU-NC, Infrared Spectroscopy Analysis Method
- NC 57-98-1-1986 Clinical Methods and Aids. Photometric Determination of Hemoglobin in Blood. Chemical Analysis Method
Lithuanian Standards Office , Infrared Spectroscopy Analysis Method
- LST EN 480-6-2006 Admixtures for concrete, mortar and grout - Test methods - Part 6: Infrared analysis
AENOR, Infrared Spectroscopy Analysis Method
- UNE-EN 480-6:2006 Admixtures for concrete, mortar and grout - Test methods - Part 6: Infrared analysis
Danish Standards Foundation, Infrared Spectroscopy Analysis Method
- DS/EN 480-6:2005 Admixtures for concrete, mortar and grout - Test methods - Part 6: Infrared analysis
- DS/EN 61290-5-1:2006 Optical amplifiers - Test methods - Part 5-1: Reflectance parameters - Optical spectrum analyzer method
Professional Standard - Public Safety Standards, Infrared Spectroscopy Analysis Method
- GA/T 823.2-2009 Analysis method for paint fragment.Part 2:Infrared absorption spectrometry
RO-ASRO, Infrared Spectroscopy Analysis Method
- STAS 10274/1-1983 Solid fuels ASH ANALYSIS General directions for spectral and chemical analysis carrying out
KR-KS, Infrared Spectroscopy Analysis Method
IPC - Association Connecting Electronics Industries, Infrared Spectroscopy Analysis Method