ZH
RU
ES

10,000 to the power of 10

10,000 to the power of 10, Total:264 items.

In the international standard classification, 10,000 to the power of 10 involves: Vibrations, shock and vibration measurements, Glass, Protection against fire, Furniture, Home textiles. Linen, Metrology and measurement in general, Medical equipment, Acoustics and acoustic measurements, Data storage devices, Hospital equipment, Products of the textile industry, Paint ingredients, Rubber and plastics products, Floor treatment appliances, Vibration and shock with respect to human beings, Microbiology, Optoelectronics. Laser equipment, Measurement of force, weight and pressure, Vacuum technology, Document imaging applications, Sterilization and disinfection, Laboratory medicine, Fuels, Paints and varnishes, Meat, meat products and other animal produce, Testing of metals, Plastics, Solar energy engineering, Law. Administration, Analytical chemistry, Alarm and warning systems, Galvanic cells and batteries, Air quality, Corrosion of metals, Wastes, Telecommunication systems, Information sciences. Publishing, Applications of information technology, Non-ferrous metals, Environmental testing, Raw materials for rubber and plastics, Tobacco, tobacco products and related equipment, Quality, Radiation protection, Pharmaceutics, CHEMICAL TECHNOLOGY, Water quality, Protection of and in buildings, Installations in buildings, Character sets and information coding, Miscellaneous domestic and commercial equipment, Kitchen equipment, Radiocommunications.

International Organization for Standardization (ISO), 10,000 to the power of 10

ISO 5347-10:1993 Methods for the calibration of vibration and shock pick-ups; part 10: primary calibration by high impact shocks
ISO/TS 19930:2017 Guidance on aspects of a risk-based approach to assuring sterility of terminally sterilized, single-use health care product that is unable to withstand processing to achieve maximally a sterility assurance level of 10-6
ISO 5347-7:1993 Methods for the calibration of vibration and shock pick-ups; part 7: primary calibration by centrifuge
ISO 5347-6:1993 Methods for the calibration of vibration and shock pick-ups; part 6: primary vibration calibration at low frequencies
ISO 16063-17:2016 Methods for the calibration of vibration and shock transducers - Part 17: Primary calibration by centrifuge
ISO 787-10:1981 General methods of test for pigments and extenders — Part 10: Determination of density — Pyknometer method
ISO 5347-8:1993 Methods for the calibration of vibration and shock pick-ups; part 8: primary calibration by dual centrifuge
ISO 23907-1:2019 Sharps injury protection — Requirements and test methods — Part 1: Single-use sharps containers
ISO/TS 7821:2005 Tobacco and tobacco products - Preparation and constitution of identical samples from the same lot for collaborative studies for the evaluation of test methods
ISO/IEC 19823-10:2017 Information technology — Conformance test methods for security service crypto suites — Part 10: Crypto suite AES-128
ISO/IEC 19823-10:2020 Information technology — Conformance test methods for security service crypto suites — Part 10: Crypto suite AES-128
ISO 5347-1:1993 Methods for the calibration of vibration and shock pick-ups — Part 1: Primary vibration calibration by laser interferometry
ISO 9459-2:1995 Solar heating - Domestic water heating systems - Part 2: Outdoor test methods for system performance characterization and yearly performance prediction of solar-only systems
ISO/IEC 29109-10:2010 Information technology - Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794 - Part 10: Hand geometry silhouette data

American Society for Testing and Materials (ASTM), 10,000 to the power of 10

ASTM C1351M-96(2012) Standard Test Method for Measurement of Viscosity of Glass Between 10⁴ Pamiddot;s and 10⁸ Pamiddot;s by Viscous Compression of a Solid Right Cylinder [Metric]
ASTM C1350M-96(2008) Standard Test Method for Measurement of Viscosity of Glass Between Softening Point and Annealing Range (Approximately 10⁸ Pa183;s to Approximately 10 ¹³ Pa183;s) by Beam Bending (Metric)
ASTM E1106-07 Standard Test Method for Primary Calibration of Acoustic Emission Sensors
ASTM E3251-23 Standard Test Method for Microbial Ingress Testing on Single-Use Systems
ASTM E3336-22 Standard Test Method for Physical Integrity Testing of Single-Use Systems
ASTM E1362-15(2019) Standard Test Methods for Calibration of Non-Concentrator Photovoltaic Non-Primary Reference Cells
ASTM E3251-20 Standard Test Method for Microbial Ingress Testing on Single-Use Systems
ASTM F494-05(2016) Standard Test Methods for Evaluating Primary Disposable Bag Integrity for Vacuum Cleaners
ASTM D4273-18 Standard Test Methods for Polyurethane Raw Materials Determination of Primary Hydroxyl Content of Polyether Polyols
ASTM F494-93(1998) Standard Test Methods for Evaluating Primary Disposable Bag Integrity for Vacuum Cleaners
ASTM F494-05 Standard Test Methods for Evaluating Primary Disposable Bag Integrity for Vacuum Cleaners
ASTM F494-93(2004) Standard Test Methods for Evaluating Primary Disposable Bag Integrity for Vacuum Cleaners
ASTM F494-05(2022) Standard Test Methods for Evaluating Primary Disposable Bag Integrity for Vacuum Cleaners
ASTM D1938-06 Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method
ASTM D1938-02 Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method
ASTM D1938-94 Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method
ASTM D1938-08 Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method
ASTM D7095-17 Standard Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip
ASTM D7095-23 Standard Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip
ASTM D7095-04(2014) Standard Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip
ASTM D7095-04 Standard Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip
ASTM D7095-04(2009) Standard Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip
ASTM D1938-14 Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method
ASTM F2547-06 Standard Test Method for Determining the Attenuation Properties in a Primary X-ray Beam of Materials Used to Protect Against Radiation Generated During the Use of X-ray Equipment
ASTM F2547-06(2013) Standard Test Method for Determining the Attenuation Properties in a Primary X-ray Beam of Materials Used to Protect Against Radiation Generated During the Use of X-ray Equipment
ASTM F2547-18 Standard Test Method for Determining the Attenuation Properties in a Primary X-ray Beam of Materials Used to Protect Against Radiation Generated During the Use of X-ray Equipment

Canadian Standards Association (CSA), 10,000 to the power of 10

CAN/CSA-C867.2-2009 Performance of decorative light strings (First Edition; Update No. 1: October 2014)
CAN/CSA-C68.7-2011 Underground secondary and service-entrance cable for electrical distribution utilities (First Edition; Update No. 1: October 2011)
CAN/CSA-Z264.1-2002 Spacers and holding chambers for use with metered-dose inhalers (First Edition; Update No. 1: October 2003 and Update No. 2: January 2008)
CAN/CSA-B70.1-2003 Frames and Covers for Maintenance Holes and Catchbasins (First Edition; Update No. 1: April 2003; Update No. 2: October 2003)
CAN/CSA-C875-2013 Performance of general service directional lamps (First Edition; Update No. 1: July 2014)
CAN/CSA-ISO/IEC 13614:2000 Information technology - Interchange on 300 mm optical disk cartridges of the write once, read multiple (WORM) type using the SSF method
CSA ASSE 1016-2011 Performance requirements for automatic compensating valves for individual showers and tub/shower combinations (First Edition; Update No. 1: May 2012; Update No. 2: October 2013)
CSA Z314.15-2015 Storage, transportation, and distribution of single use and reusable medical devices (Third Edition; Incorporating Errata: October 2015)
CSA C22.2 NO.211.0-2003 General requirements and methods of testing for nonmetallic conduit (Second Edition; Update No 1: January 2005; Update No 2: September 2006; Update No 3: May 2011)
CSA ISO/IEC 19823-10:2020 Information technology - Conformance test methods for security service crypto suites - Part 10: Crypto suite AES-128 (Adopted ISO/IEC 19823-10, second edition, 2020-01)
CAN/CSA-A123.24-2015 Standard test method for wind resistance of modular vegetated roof assembly (First Edition; Update No. 1: September 2015)
CAN/CSA-P.9-2011 Test method for determining the performance of combined space and water heating systems (combos) (First Edition; Update No. 1: March 2012)
CAN/CSA-C22.2 NO.60601-2-54-2011 Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy (First Edition; Update No. 1: October 2014)
CSA ISO/IEC 10373-1:2021 Cards and security devices for personal identification - Test methods - Part 1: General characteristics (Adopted ISO/IEC 10373-1:2020, third edition, 2020-10)
CAN/CSA-C393-2012 Test methods for measuring power consumption in low and idle power modes of commercial and industrial equipment (First Edition: Update No. 1: July 2014)

British Standards Institution (BSI), 10,000 to the power of 10

BS 6807:1986 Methods of test for the ignitability of mattresses with primary and secondary sources of ignition
BS ISO 16063-17:2016 Methods for the calibration of vibration and shock transducers. Primary calibration by centrifuge
BS EN 455-2:1995 Medical gloves for single use. Specification for physical properties
BS 6807:2006 Methods of test for assessment of ignitability of mattresses, upholstered divans and upholstered bed bases with flaming types of primary and secondary sources of ignition
PD ISO/TS 19930:2017 Guidance on aspects of a risk-based approach to assuring sterility of terminally sterilized, single-use health care product that is unable to withstand processing to achieve maximally a sterility assurance level of 10-6
16/30322561 DC BS ISO/IEC 19823-10. Information technology. Conformance test methods for security service crypto suites. Part 10. Crypto suite AES-128
19/30370911 DC BS ISO/IEC 19823-10. Information technology. Conformance test methods for security service crypto suites. Part 10. Crypto suite AES-128
BS EN 15964:2011 Breath alcohol test devices other than single use devices. Requirements and test methods
BS EN 50604-1:2016+A1:2021 Secondary lithium batteries for light EV (electric vehicle) applications - General safety requirements and test methods
BS PD ISO/TS 19930:2017 Guidance on aspects of a risk-based approach to assuring sterility of terminally sterilized, single-use health care product that is unable to withstand processing to achieve maximally a sterility assurance level of 10-6
BS 1902 Sec.3.10:1981 Methods of testing refractory materials. General and textural properties. Determination of resistance to carbon monoxide (method 1902-310)
BS DD ISO/TS 7821:2005 Tobacco and tobacco products - Preparation and constitution of identical samples from the same lot for collaborative studies for the evaluation of test methods
BS EN ISO 11810:2015 Lasers and laser-related equipment. Test method and classification for the laser resistance of surgical drapes and/or patient protective covers. Primary ignition, penetration, flame spread and secondary ignition
DD ISO/TS 7821:2005 Tobacco and tobacco products. Preparation and constitution of identical samples from the same lot for collaborative studies for the evaluation of test methods
BS EN 61427-2:2015 Tracked Changes. Secondary cells and batteries for renewable energy storage. General requirements and methods of test. On-grid applications
19/30393054 DC BS EN 50604-1 AMD1. Secondary lithium batteries for light EV (electric vehicle) applications. Part 1. General safety requirements and test methods
21/30438773 DC BS EN IEC 63118. 12V Lithium-ion Secondary Battery for Automotive SLI Applications and Auxiliary purposes. Part 1. General requirements and methods of test
BS EN ISO 23908:2013 Sharps injury protection. Requirements and test methods Sharps protection features for single-use hypodermic needles, introducers for catheters and needles used for blood sampling

RU-GOST R, 10,000 to the power of 10

GOST 8.650-2015 State system for ensuring the uniformity of measurements. State verification scheme for measuring and reproduction instruments of sound pressure in water within frequency range from 1·10 -3 to 1·10 6 Hz
GOST EN 455-1-2014 Medical gloves for single use. Part 1. Method for determination of tightness
GOST EN 455-2-2014 Medical gloves for single use. Part 2. Method for determination of physical-mechanical properties
GOST 22967-1990 Injection medical syringes of repeatid application. General technical requirements and test methods
GOST R 53966-2010 Non-destructive testing. Evaluation of mechanical stresses in constructions material. General requirements for the order of methods choice
GOST ISO 8537-2011 Sterile single-use syringes, with or without needle, for insulin. Technical requirements and test methods
GOST R 8.736-2011 State system for ensuring the uniformity of measurements. Multiple direct measurements. Methods of measurement results processing. Main principles
GOST 28213-1989 Basic environmental testing prosedures. Part 2. Tests. Test Ea and guidance: Shock
GOST R 8.800-2012 State system for ensuring the uniformity of measurements. State primary standart and state verification schedule for means measuring vibration displacement, vibration velocity and vibration acceleration over the frequency range from 1·10 -1 to 2·10 4 Hz
GOST R ISO/TR 8550-1-2007 Statistical methods. Guide to the selection and usage of acceptance sampling systems for inspection of discrete items in lots. Part 1. General requirements
GOST 8.644-2014 State system for ensuring the uniformity of measurements. National hierarchy scheme for measuring instruments of lightning discharge pulse current strength in range from 1 to 100 kA

Association Francaise de Normalisation, 10,000 to the power of 10

NF S93-123-10*NF EN ISO 8536-10:2015 Infusion equipment for medical use - Part 10 : accessories for fluid lines for single use with pressure infusion equipment
NF EN ISO 15792-2:2020 Produits consommables pour le soudage - Méthodes d'essai - Partie 2 : préparation de pièces d'essai et d'éprouvettes en une ou deux passes en acier
NF EN ISO 24998:2009 Matériel de laboratoire en matière plastique - Boîtes de Petri à usage unique pour méthodes microbiologiques
XP S98-108*XP ISO/TS 19930:2017 Guidance on aspects of a risk-based approach to assuring sterility of terminally sterilized, single-use health care product that is unable to withstand processing to achieve maximally a sterility assurance level of 10-6
NF S97-002:1995 MEDICAL GLOVES FOR SINGLE USE. PART 2 : REQUIREMENTS AND TESTING FOR PHYSICAL PROPERTIES. (EUROPEAN STANDARD EN 455-2).
NF S97-003:2007 Medical gloves for single use - Part 3 : requirements and testing for biological evaluation.
NF S97-001-3*NF EN 455-3:2015 Medical gloves for single use - Part 3 : requirements and testing for biological evaluation
NF T31-202*NF EN ISO 787-10:1995 General methods of test for pigments and extenders. Part 10 : determination of density. Pyknometer method.
NF X20-703*NF EN 15964:2011 Breath alcohol test devices other than single use devices - Requirements and test methods
NF EN ISO 23907-1:2019 Protection contre les blessures par perforants - Exigences et méthodes d'essai - Partie 1 : conteneurs à usage unique pour objets piquants ou coupants
BP X30-323-10:2011 General principles for an environmental communication on mass market products - Part 10 : methodology for the environmental impacts assesment of bedding
NF S97-132*NF EN ISO 11810:2016 Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - Primary ignition, penetration, flame spread and secondary ignition
NF C58-604-1*NF EN 50604-1:2016 Secondary lithium batteries for light EV (electric vehicle) applications - Part 1 : general safety requirements and test methods
NF C58-604-1/A1*NF EN 50604-1/A1:2021 Secondary lithium batteries for light EV (electric vehicle) applications - Part 1 : general safety requirements and test methods
NF Q34-019:1994 Articles pour usages sanitaires et domestiques - Méthode d'essai au porter pour les articles d'hygiène infantile, féminine et de l'incontinence (articles à usage unique) - Recommandations.
XP V37-023*XP ISO/TS 7821:2005 Tobacco and tobacco products - Preparation and constitution of identical samples from the same lot for collaborative studies for the evaluation of test methods
XP ISO/TS 19930:2017 Document d'orientation sur les aspects d'une approche, fondée sur l'appréciation du risque, permettant d'assurer la stérilité des produits de santé à usage unique, soumis à une stérilisation terminale y compris ceux ne pouvant pas supporter...
Q34-019:1994 Sanitary and domestic articles. Test method under conditions of use for child/woman hygiene and incontinence articles (single use articles). Recommendations.
NF S98-112:1998 Validation and routine control of sterilization by liquid chemical sterilants. Sterilization of single-use medical devices incorporating materials of animal origin.
NF D37-101-4*NF EN 1860-4:2005 Appliances, solid fuels and firelighters for barbecueing - Part 4 : single use barbecues burning solid fuels - Requirements and test methods

German Institute for Standardization, 10,000 to the power of 10

DIN EN ISO 8536-10:2015-11 Infusion equipment for medical use - Part 10: Accessories for fluid lines for single use with pressure infusion equipment (ISO 8536-10:2015); German version EN ISO 8536-10:2015
DIN EN ISO 6009 Berichtigung 1:2008 Hypodermic needles for single use - Colour coding for identification (ISO 6009:1992); German version EN ISO 6009:1994, Corrigendum to DIN EN ISO 6009:1994-10; German version EN ISO 6009:1994/AC:2008
DIN 28416:1976 Vaccum technology; calibration of vacuum gauges within the range of 10<(hoch)-3> to 10<(hoch)-7> mbar, general method: pressure reduction by continuous flow
DIN EN 300417-10-1:2004 Transmission and Multiplexing (TM) - Generic requirements of transport functionality of equipment - Part 10-1: Synchronous Digital Hierarchy (SDH) radio specific functionalities (Endorsement of the English version EN 300417-10-1 V1.1.1 (2003-11) as German
DIN 31631-5:1988 Data element catalogue for bibliographic data; handling of data categories with one entry or more entries in data formats
DIN EN 13384-1:2019-09 Chimneys - Thermal and fluid dynamic calculation methods - Part 1: Chimneys serving one heating combustion; German version EN 13384-1:2015+A1:2019
DIN EN ISO 11810:2016-06 Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - Primary ignition, penetration, flame spread and secondary ignition (ISO 11810:2015); German version EN IS...
DIN V 18599-10:2018-09 Energy efficiency of buildings - Calculation of the net, final and primary energy demand for heating, cooling, ventilation, domestic hot water and lighting - Part 10: Boundary conditions of use, climatic data
DIN EN ISO 11810:2016 Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - Primary ignition, penetration, flame spread and secondary ignition (ISO 11810:2015)
DIN EN 15964:2011 Breath alcohol test devices other than single use devices - Requirements and test methods; German version EN 15964:2011
DIN 38409-10:1980 German standard methods for the examination of water, waste water and sludge; general measures of effects and substances (group H), determination of the settleable matter by mass concentration in water and waste water (H10)
DIN V 18599-10:2011 Energy efficiency of buildings - Calculation of the net, final and primary energy demand for heating, cooling, ventilation, domestic hot water and lighting - Part 10: Boundary conditions of use, climatic data
DIN V 18599-10:2016 Energy efficiency of buildings - Calculation of the net, final and primary energy demand for heating, cooling, ventilation, domestic hot water and lighting - Part 10: Boundary conditions of use, climatic data
DIN EN 1860-4:2022 Appliances, solid fuels and firelighters for barbecuing - Part 4: Single use barbecues burning solid fuels - Requirements and test methods; German and English version prEN 1860-4:2022
DIN EN 1860-4:2023-08 Appliances, solid fuels and firelighters for barbecuing - Part 4: Single use barbecues burning solid fuels - Requirements and test methods; German version EN 1860-4:2023
DIN 38402-6:1991 German standard methods for the examination of water, waste water and sludge; general information (group A); assessment of the minimum frequency for controlling water constituents in discharges (emission strategy) (A 6)

KR-KS, 10,000 to the power of 10

KS P ISO 8536-10-2022 Infusion equipment for medical use — Part 10: Accessories for fluid lines for single use with pressure infusion equipment
KS M ISO 787-10-2022 General methods of test for pigments and extenders — Part 10: Determination of density — Pyknometer method
KS P ISO 23908-2021 Sharps injury protection — Requirements and test methods —Sharps protection features for single-use hypodermic needles, introducers for catheters and needles used for blood sampling

IX-ECMA, 10,000 to the power of 10

ECMA 189-1993 Information Interchange on 300 mm Optical Disk Cartridges of the Write Once, Read Multiple (Worm) Type Using the SSF Method
ECMA 190-1993 Information Interchange on 300 mm Optical Disk Cartridges of the Write Once, Read Multiple (Worm) Type Using the CCS Method

SE-SIS, 10,000 to the power of 10

SIS SS 3148-1987 Technical drawings - Symbols for parting, direction and first clamping

ES-UNE, 10,000 to the power of 10

UNE-EN ISO 8536-10:2015 Infusion equipment for medical use - Part 10: Accessories for fluid lines for single use with pressure infusion equipment (ISO 8536-10:2015)
UNE-EN ISO 11810:2015 Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - Primary ignition, penetration, flame spread and secondary ignition (ISO 11810:2015) (Endorsed by AENOR in...
UNE-EN 50604-1:2016/A1:2021 Secondary lithium batteries for light EV (electric vehicle) applications - Part 1: General safety requirements and test methods (Endorsed by Asociación Española de Normalización in September of 2021.)
UNE-EN 50604-1:2016 Secondary Lithium batteries for light EV (electric vehicle) applications - Part 1: General safety requirements and test methods (Endorsed by AENOR in December of 2016.)
UNE 118028:2018 Tobacco and tobacco products. Preparation and constitution of samples as similar as posible from the same lot for collaborative studies for the evaluation of the tobacco test methods.

Danish Standards Foundation, 10,000 to the power of 10

DS/ISO/IEC 13614:1996 Information technology - Interchange on 300 mm optical disk cartridges of the write once, read multiple (WORM) type using the SSF method
DS/ISO/IEC 13403:1996 Information technology - Information interchange on 300 mm optical disk cartridges of the write once, read multiple (WORM) type using the CCS method
DS/EN 61427:2005 Secondary cells and batteries for photovoltaic energy systems (PVES) - General requirements and methods of test
DS/EN 15964:2011 Breath alcohol test devices other than single use devices - Requirements and test methods
DS/EN ISO 787-10:1995 General methods of test for pigments and extenders - Part 10: Determination of density - Pycnometer method
DS/EN 1860-4:2005 Appliances, solid fuels and firelighters for barbecueing - Part 4: Single use barbecues burning solid fuels - Requirements and test methods
DS/EN ISO 23908:2013 Sharps injury protection - Requirements and test methods - Sharps protection features for single-use hypodermic needles, introducers for catheters and needles used for blood sampling

European Telecommunications Standards Institute (ETSI), 10,000 to the power of 10

ETSI TS 125 460-2011 Universal Mobile Telecommunications System (UMTS); UTRAN Iuant interface: General aspects and principles V10.0.0; 3GPP TS 25.460 version 10.0.0 Release 10
ETSI TS 125 420-2011 Universal Mobile Telecommunications System (UMTS); UTRAN Iur interface general aspects and principles V10.1.0; 3GPP TS 25.420 version 10.1.0 Release 10
ETSI TS 125 450-2011 Universal Mobile Telecommunications System (UMTS); UTRAN Iupc interface general aspects and principles V10.1.0; 3GPP TS 25.450 version 10.1.0 Release 10
ETSI TS 136 410-2011 LTE; Evolved Universal Terrestrial Radio Access Network (E-UTRAN); S1 general aspects and principles V10.0.0; 3GPP TS 36.410 version 10.0.0 Release 10
ETSI TS 136 420-2011 LTE; Evolved Universal Terrestrial Radio Access Network (E-UTRAN); X2 general aspects and principles V10.0.0; 3GPP TS 36.420 version 10.0.0 Release 10
ETSI TS 145 001-2012 Digital cellular telecommunications system (Phase 2+); Physical layer on the radio path; General description V10.1.0; 3GPP TS 45.001 version 10.1.0 Release 10
ETSI TS 136 440-2011 LTE; Evolved Universal Terrestrial Radio Access Network (E-UTRAN); General aspects and principles for interfaces supporting Multimedia Broadcast Multicast Service (MBMS) within E-UTRAN V10.0.0; 3GPP TS 36.440 version 10.0.0 Release 10
ETSI TS 148 001-2005 Digital Cellular Telecommunications System (Phase 2+); General Aspects on the BSS-MSC Interface 3GPP TS 48.001 version 6.0.0 Release 6
ETSI TS 148 001-2002 Digital Cellular Telecommunications System (Phase 2+); General Aspects on the BSS-MSC Interface 3GPP TS 48.001 Version 5.0.0 Release 5
ETSI TS 136 307-2011 LTE; Evolved Universal Terrestrial Radio Access (E-UTRA); Requirements on User Equipments (UEs) supporting a release-independent frequency band V10.0.1; 3GPP TS 36.307 version 10.0.1 Release 10

IN-BIS, 10,000 to the power of 10

IS 8437 Pt.1-1993 Guide on effects of current passing through the human body. Part 1: General aspects (First Revision)
IS 10280-1993 Earth-moving machinery. Operation and maintenance. Format and content of manuals (First Revision)
IS 2720 Pt.19-1992 Methods of test for soils. Part 18: Determination of cemtrofige ,postire equivalent (First Revision)
IS 11611-1992 Fire test for valves (including soft seated quarter turn valve). Method of test (First Revision)
IS 4020-1992 Methods of tests for wooden flush door shutters: type tests (First Revision)
IS 4495-1992 Cinematography. Light output of narrow gauge film projectors. Method of measurement (First Revision)
IS 11114 Pt.3-1993 Earth-moving machinery. Definitions of dimensions and symbols. Part 3: Equipment (First Revision)
IS 8437 Pt.2-1993 Guide on effects of current passing through the human body. Part 2: Special aspects (First Revision)
IS 2720 Pt.18-1992 Methods of test for soils. Part 18: Determination of field moisture equivalent (First Revision)
IS 228 Pt.16-1992 Methods for chemical analysis of steels. Part 15: Determination of tungsten by spectrophotometric method (for tungsten 0.1 to percent) (Second Revision)
IS 11114 Pt.2-1993 Earth-moving machinery. Definitions of dimensions and symbols. Part 2: Base machine (First Revision)
IS 11115-1993 Earth-moving machinery. Human physical dimensions of operators and minimum operator space envelope (First Revision)
IS 11114 Pt.4-1993 Earth-moving machinery. Definitions of dimensions and symbols. Part 4: Loaders. Terminology and commercial specificaiton (First Revision)
IS 11738 Pt.1-1993 Bulk handling equipment. Crawler tractors. Data sheet. Part 1: Information to be supplied by purchaser (First Revision)
IS 2600 Pt.4-1993 Methods of chemical analysis of zinc and zinc base alloys for die castings. Part 4: Determination of chromium by spectrophotometric method (First Revision)
IS 2830-1992 Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes. Specification (Second Revision)

Korean Agency for Technology and Standards (KATS), 10,000 to the power of 10

KS X ISO/IEC 13614-2013(2019) Information technology－Interchange on 300 mm optical disk cartridges of the write once, read multiple (WORM) type using the SSF method
KS K 9072-2019 Textiles — Test method for disposable nonwovens — Determination of water absorption property
KS X ISO/IEC TR 10091-2001(2016) Information technology — Technical aspects of 130 mm optical disk cartridge write-once recording format
KS X ISO/IEC TR 10091-2001(2021) Information technology — Technical aspects of 130 mm optical disk cartridge write-once recording format
KS K 9071-2019 Textiles — Test method for disposable nonwovens — Determination of moisture drying time
KS B ISO 5347-7:2014 Methods for the calibration of vibration and shock pick-ups — Part 7: Primary calibration by centrifuge
KS M ISO 787-10:2022 General methods of test for pigments and extenders — Part 10: Determination of density — Pyknometer method
KS B ISO 5347-8:2014 Methods for the calibration of vibration and shock pick-ups — Part 8: Primary calibration by dual centrifuge
KS B 0713-7-2001 Methods for the calibration of vibration and shock pick-ups-Part 7 : Primary calibration by centrifuge
KS X ISO/IEC 13403-2014(2020) Information technology — Information interchange on 300 mm optical disk cartridges of the write once, read multiple(WORM) type using the CCS method
KS B 0713-8-2001 Methods for the calibration of vibration and shock pick-ups-Part 8 : Primary calibration by dual centrifuge
KS M ISO 6685:2004 Chemical products for industrial use－General method for determination of iron content－1, 10－Phenanthroline spectrophotometric method
KS B 0713-2-2012 Methods for the calibration of vibration and shock pick-ups－Part 2 : Primary shock calibration by light cutting
KS H ISO TS 7821:2007 Tobacco and tobacco products－Preparation and constitution of identical samples from the same lot for collaborative studies for the evaluation of test methods
KS H ISO TS 7821:2017 Tobacco and tobacco products－Preparation and constitution of identical samples from the same lot for collaborative studies for the evaluation of test methods
KS H ISO TS 7821-2017(2022) Tobacco and tobacco products－Preparation and constitution of identical samples from the same lot for collaborative studies for the evaluation of test methods
KS B ISO 5347-20_2001:2012 Methods for the calibration of vibration and shock pick-ups－Part 20：Primary vibration calibration by the reciprocity method
KS B 0713-1-2012 Methods for the calibration of vibration and shock pick-ups－Part 1：Primary vibration calibration by laser interferometry
KS P ISO 23908:2021 Sharps injury protection — Requirements and test methods —Sharps protection features for single-use hypodermic needles, introducers for catheters and needles used for blood sampling

International Telecommunication Union (ITU), 10,000 to the power of 10

ITU-R QUESTION 230/1-2004 Improved measurement methods for unwanted emissions of primary radars using magnetrons
ITU-R QUESTION 2301-2004 Improved measurement methods for unwanted emissions of primary radars using magnetrons
ITU-T Z.500 FRENCH-1997 Framework on formal methods in conformance testing
ITU-T Z.500 SPANISH-1997 Framework on formal methods in conformance testing

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, 10,000 to the power of 10

QUESTION 230/1-2004 Improved measurement methods for unwanted emissions of primary radars using magnetrons

Lithuanian Standards Office , 10,000 to the power of 10

LST EN ISO 787-10:2002 General methods of test for pigments and extenders - Part 10: Determination of density - Pycnometer method (ISO 787-10:1993)
LST EN 15964-2011 Breath alcohol test devices other than single use devices - Requirements and test methods
LST EN 61427-2005 Secondary cells and batteries for photovoltaic energy systems (PVES). General requirements and methods of test (IEC 61427:2005)
LST EN 50604-1/A1-2021 Secondary lithium batteries for light EV (electric vehicle) applications - Part 1: General safety requirements and test methods
LST EN 1860-4-2005 Appliances, solid fuels and firelighters for barbecueing - Part 4: Single use barbecues burning solid fuels - Requirements and test methods

AENOR, 10,000 to the power of 10

UNE-EN ISO 787-10:1996 GENERAL METHODS OF TEST FOR PIGMENTS AND EXTENDERS. PART 10: DETERMINATION OF DENSITY. PYCNOMETER METHOD. (ISO 787-10:1993).
UNE-EN 15964:2012 Breath alcohol test devices other than single use devices - Requirements and test methods
UNE-EN 1860-4:2005 Appliances, solid fuels and firelighters for barbecueing - Part 4: Single use barbecues burning solid fuels - Requirements and test methods
UNE 118028:2012 Tobacco and tobacco products. Preparation and constitution of identical samples from the same lot for collaborative studies for the evaluation of tobacco test methods.

American National Standards Institute （ANSI), 10,000 to the power of 10

ANSI/ASTM F494:1993 Test Methods for Evaluating Primary Disposable Bag Integrity for Vacuum Cleaners
ANSI X3.199-1991 Information Systems - 356-mm Optical Disk Cartridge (Write-Once) - Test Methods for Media Characteristics
BS EN 1860-4:2023 Appliances, solid fuels and firelighters for barbecuing Single use barbecues burning solid fuels. Requirements and test methods (British Standard)

PL-PKN, 10,000 to the power of 10

PN Z55202-1991 Medical equipment. Transfusion sets for single use. Requirements and test methods

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, 10,000 to the power of 10

GB/T 13823.14-1995 Methods for the calibration of vibration and shock pick-ups. Primary calibration by centrifuge
GB/Z 20648-2006 Electronic imaging-Recommendations for the expungement of information recorded on write-once optical media
GB/T 13823.13-1995 Methods for calibration of vibration and shock pick-ups. Primary shock calibration by light cutting
GB/T 13823.11-1995 Methods for the calibration of vibration and shock pick-ups. Primary vibration calibration by laser interferometry at low frequencies
GB/T 13823.2-1992 Methods for the calibration of vibration and shock pick-ups. Primary vibration calibration by laser interferometry
GB/T 6378.1-2008 Sampling procedures for inspection by variables.Part1:Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL

ANSI - American National Standards Institute, 10,000 to the power of 10

INCITS/ISO/IEC 13403:1995 Information technology - Information interchange on 300 mm optical disk cartridges of the write once@ read multiple (WORM) type using the CCS method (Adopted by INCITS)
INCITS/ISO/IEC TR 10091:1995 Information technology - Technical aspects of 130 mm optical disk cartridge write-once recording format
INCITS/ISO/IEC 13614:1995 Information technology - Interchange on 300 mm optical disk cartridges of the write once@ read multiple (WORM) type using the SSF method (Adopted by INCITS)
INCITS 199-1991 Information Systems - 356-mm Optical Disk Cartridge (Write-Once) - Test Methods for Media Characteristics (Replaces ANSI X3.199-1991)
INCITS/ISO/IEC 29109-10:2010 Information technology - Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794 - Part 10: Hand geometry silhouette data

ISA - International Society of Automation, 10,000 to the power of 10

ISA 61010-1-2004 Safety Requirements for Electrical Equipment for Measurement Control@ and Laboratory Use – Part 1: General Requirements (82.02.01; Third Printing: 10/28/2008)

European Committee for Standardization (CEN), 10,000 to the power of 10

prEN 455-2-1991 Medical gloves for single use; part 2: requirements and testing for physical properties
EN 1860-4:2023 Appliances, solid fuels and firelighters for barbecuing - Part 4: Single use barbecues burning solid fuels - Requirements and test methods
HD 236.1 S1-1977 Methods of measurement for radio transmitters; part 1: general conditions of measurement, frequency, output power and power consumption; first supplement: appendices

国家市场监督管理总局、中国国家标准化管理委员会, 10,000 to the power of 10

GB/T 40181-2021 Test method and evaluation for flushability of disposable sanitary nonwoven materials

Malaysia Standards, 10,000 to the power of 10

MS 875-2001 Method of test for sulphur in liquefied petroleum gases(Oxy-hydrogen burner or lamp)(First revision)
MS 133 Pt.D1-1998 Methods of test for paints and varnishes:part d1:visual comparison of the colour of paints (first revision)
MS 954 Pt.2-2000 Methods of test for meat and meat products: Part 2: determination of total ash (first revision)
MS 954 Pt.1-2000 Methods of test for meat and meat products: Part 1: determination of moisture content (first revision)
MS 133 Pt.E2-2000 Methods of test for paints and varnishes:Part E2:Scratch test(First revision)(ISO 1518:1992,MOD)
MS 133 Pt.E6-2000 Methods of test for paints and varnishes:Part E6:Cross-cut test (First revision) (ISO 2409:1992,MOD)
MS 133 Pt.E7-2000 Methods of test for paints and varnishes:Part E7:Resistance to impact (Falling ball test) (First revision)
MS 133 Pt.B3-1998 Methods of test for paints and varnishes:part b3:determination of pigment content (centrifuge) (first revision)
MS 954 Pt.5-2000 Methods of test for meat and meat products: Part 5: determination of free fat content (first revision)
MS 133 Pt.E5-2000 Methods of test for paints and varnishes:Part E5:Pendulum damping test (First revision)(ISO 1522:1998,MOD)
MS 133 Pt.D4-1998 Methods of test for paints and varnishes:part d4:comparison of Ccontrast ratio (hiding power) of paints of the same type and colour (first revision)
MS 133 Pt.E3-2000 Methods of test for paints and varnishes:Part E3:Resistance to impact(Falling-weight test)(First revision)(ISO 6272:1993,MOD)
MS 954 Pt.12-2000 Methods of test for meat and meat products: Part 12: determination of chloride content (as sodium chloride) (first revision)
MS 954 Pt.9-2000 Methods of test for meat and meat products:Part 9:Determination of hydroxyproline content (First revision)(ISO 3496:1994,IDT)
MS 133 Pt.E1-2000 Methods of test for paints and varnishes:Part E1:Bend test(Cylindrical mandrel)(First revision)(ISO 1519:1973,MOD)

RO-ASRO, 10,000 to the power of 10

STAS SR ISO 787-10:1995 General methods of test for pigments and extenders -Part 10 : Determination of density - Pyknorneter method

Standard Association of Australia （SAA）, 10,000 to the power of 10

AS 5013.10/AMD 1:2005 Amendment No.1 to AS 5013.10-2004 Food microbilolgy Method 10: Microbiology of food and animal feeding stuffs - Horizontal method for the detection of Salmonella spp.

(U.S.) Ford Automotive Standards, 10,000 to the power of 10

FORD WSS-M2P189-A10-2009 PLATING PERFORMANCE, 10 CYCLES APG/APG''''E'''' CORROSION, MODERATE VISIBILITY ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2P189-A1)
FORD WSS-M2P189-A17-2009 PLATING PERFORMANCE, 10 CYCLES APG/APG?E? CORROSION, MODERATE VISIBILITY ***TO BE USED WITH FORD WSS-M99P1111-A***

Indonesia Standards, 10,000 to the power of 10

SNI 7119.10-2011 Ambient atmospheres - Part 10: Test methods of carbon monoxide (CO) by method of Non-dispersive Infra Red (NDIR)
SNI 04-6392-2000 Secondary cells and batteries for individual photovoltaic electric power generating system - General requirement and method of tests

IT-UNI, 10,000 to the power of 10

UNI 10667-10-2021 Plastic raw-secondary materials - Part 10: Polystyrene from industrial residues and/or from pre and/or post-consumer materials, to be used for general purposes - Requirements and test methods

CEN - European Committee for Standardization, 10,000 to the power of 10

EN ISO 23907-1:2019 Sharps injury protection - Requirements and test methods - Part 1: Single-use sharps containers
EN 1860-4:2004 Appliances@ solid fuels and firelighters for barbecueing - Part 4: Single use barbecues burning solid fuels - Requirements and test methods

International Electrotechnical Commission (IEC), 10,000 to the power of 10

IEC 60945/AMD1:1992 Marine navigational equipment; general requirements; methods of testing and required test results; amendment 1
IEC 60244-1/AMD2:1989 Methods of measurement for radio transmitters; part 1: general conditions of measurement, frequency, output power and power consumption; amendment No. 2 to publication 60244-1:1968

Professional Standard - Medicine, 10,000 to the power of 10

YY/T 1416.3-2016 Test method for additive in single-use containers for human venous blood specimen collection.Part 3:Heparin
YY/T 1416.4-2016 Test method for additive in single-use containers for human venous blood specimen collection.Part 4:Fluoride
YY/T 1416.2-2016 Test method for additive in single-use containers for human venous blood specimen collection.Part 2: Sodium citrate
YY/T 1416.1-2016 Test method for additive in single-use containers for human venous blood specimen collection.Part 1:Ethylene diamine tetraacetic acid (EDTA) salt

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., 10,000 to the power of 10

ASHRAE 152P-1999 Method of Test for Determining the Design and Seasonal Efficiencies of Residential Thermal Distribution Systems (First Public Review Draft)

ZA-SANS, 10,000 to the power of 10

SANS 16063-13:2008 Methods for the calibration of vibration and shock transducers Part 13: Primary shock calibration using laser interferometry

European Committee for Electrotechnical Standardization（CENELEC）, 10,000 to the power of 10

EN 50604-1:2016 Secondary lithium batteries for light EV (electric vehicle) applications - Part 1: General safety requirements and test methods

国家药监局, 10,000 to the power of 10

YY/T 1416.5-2021 Method for determination of dosage added in disposable human venous blood sample collection containers Part 5: Glycine
YY/T 1416.6-2021 Method for determination of dosage added in disposable human venous blood sample collection containers Part 6: Imidazolidinyl urea

IX-EU/EC, 10,000 to the power of 10

85/490/EEC-1985 Fourth Commission Directive on the Approximation of the Laws of the Member States Relating to Methods of Analysis Necessary for Checking the Composition of Cosmetic Products
83/514/EEC-1983 Third Commission Directive on the Approximation of the Laws of the Member States Relating to Methods of Analysis Necessary for Checking the Composition of Cosmetic Products
91/338/EEC-1991 Council Directive amending for the 10th time Directive 76/769/EEC on the approximation of the laws, regulations and administrative provisions of the Member States relating to restrictions on the marketing and use of certain dangerous substances and prepar

国家食品药品监督管理局, 10,000 to the power of 10

YY/T 0616.3-2018 Disposable Medical Gloves Part 3: Methods for Determining Actual Time Expiration Dates Using Finished Gloves in Storage

Japanese Industrial Standards Committee (JISC), 10,000 to the power of 10

JIS X 0607 ERRATUM 1:2001 Technical Corrigendum 1 to Volume and file structure of write-once and rewritable media using non-sequential recording for information interchange
JIS X 0607:1996 Information technology -- Volume and file structure of write-once and rewritable media using non-sequential recording for information interchange

API - American Petroleum Institute, 10,000 to the power of 10

API MPMS 13.2-1994 Manual of Petroleum Measurement Standards Chapter 13 - Statistical Aspects of Measuring and Sampling Section 2 - Methods of Evaluating Meter Proving Data (FIRST EDITION; ERTA: October 2015)

ETSI - European Telecommunications Standards Institute, 10,000 to the power of 10

TS 136 420-2011 LTE; Evolved Universal Terrestrial Radio Access Network (E-UTRAN); X2 general aspects and principles (V10.2.0; 3GPP TS 36.420 version 10.2.0 Release 10)

GOSTR, 10,000 to the power of 10

GOST R IEC 61427-2-2016 Secondary cells and batteries for renewable energy storage. General requirements and methods of test. Part 2. On-grid applications

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, 10,000 to the power of 10

ITU-T I.113-1989 Vocabulary of Terms for Broadband Aspects of ISDN - Integrated Services Digital Network (ISDN) - General Structure and Service Capabilities (Study Group XVIII) 10 pp

未注明发布机构, 10,000 to the power of 10

BS 2782-10-Method 1008A:1996(1999) Methods of testing Plastics — Part 10 : Glass reinforced plastics — Method 1008A.General considerations and preparation of rods for determination of mechanical properties on rods made from roving - reinforced resins

PT-IPQ, 10,000 to the power of 10

NP 2847/3-1985