ZH

RU

ES

Fiber Testing Instruments

Fiber Testing Instruments, Total:495 items.

In the international standard classification, Fiber Testing Instruments involves: Non-destructive testing, Fibre optic communications, Quality, Textile fibres, Alarm and warning systems, Textile auxiliary materials, Optical equipment, Paper and board, Rubber and plastics products, Pulps, Tea. Coffee. Cocoa, Construction materials, Radiation measurements, Products of the textile industry, Cereals, pulses and derived products, Nuclear energy engineering, Telecommunication systems, Astronomy. Geodesy. Geography, Analytical chemistry, Wood, sawlogs and sawn timber, Materials for the reinforcement of composites, Materials for aerospace construction, General methods of tests and analysis for food products, Processes in the food industry, Farming and forestry, Reinforced plastics, Optics and optical measurements, Wood-based panels, Explosion protection, Measurement of volume, mass, density, viscosity, Testing of metals, Metrology and measurement in general, Linear and angular measurements, Radiation protection, Inorganic chemicals, Mechanical testing, Water quality, Fluid storage devices, Acoustics and acoustic measurements, Food products in general, Geology. Meteorology. Hydrology.


VE-FONDONORMA, Fiber Testing Instruments

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Fiber Testing Instruments

  • GB/T 33887-2017 Non-destructive testing instruments—Industrial optical fiber endoscope detector
  • GB/T 34790-2017 Inspenction of grain and oils—Determination of water activity of grains—Instrumental method
  • GB/T 34807-2017 General technical specifications for inspection and test of geotechnical engineering instruments & equipment

HU-MSZT, Fiber Testing Instruments

CZ-CSN, Fiber Testing Instruments

  • CSN 80 0204-1976 Determination of cotton fíbre length by rneans of meehanical instrumenta
  • CSN 80 0311-1975 Deteclion of ripeness of cotton fibres in polarized liglit
  • CSN 25 0100-1986 Tests and approvals of a types of measuring instruments. General requirements

National Metrological Verification Regulations of the People's Republic of China, Fiber Testing Instruments

YU-JUS, Fiber Testing Instruments

  • JUS F.S2.242-1984 Cotton fibres. Test method for braaking strength. Pretsley apparatus
  • JUS F.S3.139-1982 Testing (Quantitative analysis) mixtures of fibres. Binary mixtures of cellulose and polyester fibres. Sulphuric acid method
  • JUS F.S3.147-1982 Testing (Quantitative analysis) mixtures of fibres. Binary mixtures of cellulose fibres andasbestos. Electric fumace method
  • JUS F.S3.139/1-1992 Testing (Quantitative analysis) of fibres mixtures. Binary mixtures of cellulose and polyester fibres. Sulphuric acid method. Amendments
  • JUS F.S3.133-1982 Testing (quantitative analysi$) mixtures of fibres. Binary mixtures of viscose or cupro and coton. Sodium cincate method
  • JUS F.S3.143-1982 Testing (Quantitative analysis) mixtures of fibres. Binary mixtures of jute and certain animal fibres. Method contain nitrogen
  • JUS F.S3.150-1992 Textile. Testing of mixtures of fibres. Determination of nitrogen content for identification of acrylic and modacrylic fibres
  • JUS F.S3.149-1992 Testing of fibres mixtures. Binary mixtures of clorofibres, certain modacrylic, certain elastany, acetate, triacetate and certain other fibres. Cicloheksanon
  • JUS F.S3.151-1992 Textile. Testing of mixtures of fibres. Determination of chlorine content for identification of chlorofibres and trivinil fibres
  • JUS F.S2.511-1977 Testing oftextiles. Quantitati?e and qualitative analysis of man-made textile fibres, staple
  • JUS D.A8.082-1984 Testing of fibre building boards. Determination of dimensions of test pieces
  • JUS F.S3.134-1982 Testing (Quantitative analysis) mixtures of fibres. Binary mixtures of viscose or certain types of cupro or modal and coton fibres. Formic acid and zinc method
  • JUS F.S3.144-1982 Testing (Quantitative analysis) mixtures of fibres. Binary mixtures of polypropylene and certain other fibres. Ksilen method
  • JUS N.S5.606-1985 Testing ofcardiac defibrillators — monitors
  • JUS F.S3.145/1-1992 Testing (Quantitative analysis) of fibres mixtures. Binary mixtures of chlorofibres (homopolymers of vinyl chloride) and certain other fibres. Sulphuric acid method. Amendments
  • JUS F.S3.143/1-1992 Testing (Quantitative analysis) of fibres mixtures. Binary mixtures of jute and certain animal fibres. Method by determining nitrogen content. Amendments
  • JUS F.S3.144/1-1992 Testing (Quantitative analysis) of fibres mixtures. Binary mixtures of polypropylene and cortain other fibres. Xylen method. Amendments
  • JUS D.A8.094-1984 Testing of fibre building boards. Determination of flatness of test pieces
  • JUS F.S3.132-1982 Testing (Quantitative analysis) mixtures of fibres. Binary mixtures of certain protein and certain other fibres. Hypochlorite method
  • JUS F.S3.134/1-1992 Testing (Quantitative analysis) of fibres mixtures. Binary mixtures of viscose or certain types of cupro or modal and coton fibres. Formic acid and zinchloride method. Amendments
  • JUS F.S3.138-1982 Testing (Quantitative analysis) mixtures of fibres. Binary mixtures of triacetate and certain other fibres. Dichloromethane method
  • JUS F.S3.142/1-1992 Testing (Quantitative analysis) of fibres mixtures. Binary mixtures of acetate and certain chlorofibres. Glacial acetic acid method. Amendments
  • JUS F.S3.145-1982 Testing (Quantitative analysis) mixtures of fibres. Binary mixtures of chlorofibres (homopolymers of vinyl chloride) and cer ta in other fibres. Suplhuric acid method
  • JUS F.S3.135-1982 Testing (Quantitative analysis) meoctures of fibres. Binary mixtures of polyamide 6 or 6.6 and certain other fibres. Formicacid method
  • JUS F.S3.135/1-1992 Testing (Quantitative analysis) of fibres mixtures. Binary mixtures of polyamide 6 or 6.6 and cortain other fibres. Formic acid method. Amendments
  • JUS D.A8.089-1984 Testing of fibre buildlng boards. Measuring of dimensions, straightness of arrisses of boards
  • JUS F.S3.138/1-1992 Testing (Quantitative analysis) of fibres mixtures. Binary mixtures of triacetate and certain other fibres. Dichloromethane method. Amendments
  • JUS F.S2.252-1989 Testing of textiles. Wool. Determination of mean diameter of fibres. Air permeabilitv method
  • JUS F.S3.132/1-1992 Testing (Quantitative analysis) of fibres mixtures. Binary mixtures of certain protein and certain other fibres. Hypochlorite method. Amendments
  • JUS N.A5.036-1979 Compliance ofprotection against heating. Determination ofthe thermal conductivity of the glass-fibre
  • JUS F.S3.140-1982 Testing (Quantitative analysis) mixitures of fibres. Binary mixtures of acrylic, certain modacrylic or certain chlorofibres and certain other fibres. Dimethylformamide method
  • JUS F.S3.136-1982 Testing ( Quantitative analysis) mixtures of fibres. Binary mixtures of acetate and triacetate fibres. Acetone method
  • JUS D.A8.086-1984 Testing of fibre building boards. Determination of tensile strength parallel to boards
  • JUS F.S3.141-1982 Testing (Quantitative analysis) mixtures of fibres. Binary mixtures of certain chlorofibres and certain other fibres. Azeotropic mixture of carbon disulphide and acetone method
  • JUS F.S3.131-1982 Testing (Quantitative analysis) mixtures of fibres. Binary mixtures of fibres. Binary mixturesof acetate and certain other fibres. Acetone method
  • JUS F.S3.137-1982 Testing (Quantitative analysis) mixtures od fibres. Binary mixtures of acetate and triacetate fibres. Benzyl alcohol method
  • JUS D.A8.084-1984 Testing of fibre building boards. Detsrmination of water absorption and of swelling in thickness after immersion in water
  • JUS F.S3.140/1-1992 Testing (Quantitative analysis) of fibres mixtures. Binary mixtures of acryllic, certain modocrylic or certain chlorofibres and certain other fibres. Dimethylformamide method. Amendments
  • JUS D.A8.091-1984 Testing of fibre building boards. Determination of tensile strength perpendicular to surface of board (delamination)
  • JUS F.S3.131/1-1992 Testing (Quantitative analysis) of fibres mixtures. Binary mixtures of acetate and certain other fibres. Acetone method. Amendments
  • JUS F.S3.141/1-1992 Testing (Quantitative analysis) of fibres mixtures. Binary mixtures of certain chlorofibres and certain other fibres. Azeotropic mixture of carbon disulphide and acetone method. Amendments
  • JUS F.S3.142-1982 Testing (Quantitative analysis) mixtures of fibres. Binary mixtures of acetate and certain chlorofibres. Glacial acetic acid method
  • JUS F.S3.137/1-1992 Testing (Quantitative analysis) of fibres mixtures. Binary mixtures of acetate and triacetate fibres. Benzyl alcohol method. Amendments
  • JUS H.Z8.056-1984 Testing of engine antifreezes. Determination of corrosion in glass apparatus
  • JUS F.S1.021-1989 Testing of textiles. Determination of impurities content in textile fibrous materials, soluble in organic solvents
  • JUS F.S2.254-1989 Testing of texil.es. Air permeabilttv method for measuring the mean diameter of raw-grease wool fibres
  • JUS F.S3.101-1979 Testing of textiles. Quantitative analysis of mature of several kinds of textile fibres. General requirements

National Metrological Technical Specifications of the People's Republic of China, Fiber Testing Instruments

  • JJF(纺织) 02-1985 Calibration method of Y145 air-flow fiber fineness tester
  • JJF 1052-1996 Calibration Specification for Fibre Fineness Tester of Airflow Method

ISA - International Society of Automation, Fiber Testing Instruments

British Standards Institution (BSI), Fiber Testing Instruments

  • BS EN 61300-3-35:2015 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Visual inspection of fibre optic connectors and fibre-stub transceivers
  • BS 4044:1989 Methods for determination of fibre length by comb sorter diagram
  • BS ISO 5350-4:2006 Pulps - Estimation of dirt and shives - Instrumental inspection by reflected light using equivalent black area (EBA) method
  • BS 6049-9:1999 Methods of test for tea. Determination of crude fibre content
  • BS EN 61300-3-45:2011 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Attenuation of random mated multi-fibre connectors
  • BS EN 61300-3-49:2013 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Guide pin retention force for rectangular ferrule multi-fibre connectors
  • BS IEC 61888:2003 Nuclear power plants - Instrumentation important to safety - Determination and maintenance of trip setpoints
  • BS EN 61290-3-1:2003 Optical amplifiers - Test methods - Part 3-1:Noise figure parameters - Optical spectrum analyzer method
  • BS EN 61290-3-1:2004 Optical fibre amplifiers. Basic specification. Test methods for noise figure parameters. Optical spectrum analyzer method
  • BS EN 61300-3-48:2013 Fibre optic interconnect devices and passive components. Basic test and measurement procedures. Examinations and measurements. Spring compression force of the coupling sleeve for rectangular ferrule multi-fibre connectors
  • BS EN 61300-3-37:2005 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Endface angle of angle- polished optical fibres
  • 20/30406526 DC BS EN ISO 1973. Textile fibres. Determination of linear density. Gravimetric method and vibroscope method
  • BS EN 50241-2:1999 Specification for open path apparatus for the detection of combustible or toxic gases and vapours - Performance requirements for apparatus for the detection of combustible gases
  • BS EN 1787:2000 Foodstuffs. Detection of irradiated food containing cellulose by ESR spectroscopy
  • BS EN 61300-3-51:2014 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Pin gauge withdrawal force for rectangular ferrule multi-fibre connectors
  • 19/30400773 DC BS EN 1787. Foodstuffs. Detection of irradiated food containing cellulose by ESR spectroscopy
  • BS EN 61300-3-24:2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Keying accuracy of optical connectors for polarization maintaining fibre
  • BS EN 61300-2-50:2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Fibre optic connector proof test with static load - Singlemode and multimode
  • BS EN 14278-1:2005 Textiles - Determination of cotton fibre stickiness - Method using a manual theromodetection device
  • BS EN 14278-1:2004 Textiles-Determination of cotton fibre stickiness-Part 1:Method using a manual thermodetection device
  • BS EN 1787:2022 Tracked Changes. Foodstuff. Detection of irradiated foodstuff containing cellulose by ESR spectroscopy
  • BS 6020-5:1982 Instruments for the detection of combustible gases - Specification for performance requirements for Group II instruments reading up to 100% gas
  • BS EN 61300-3-29:2014 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Spectral transfer characteristics of DWDM devices
  • BS EN 61300-3-4:2013 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Attenuation
  • BS EN 61300-2-44:2005 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Flexing of the strain relief of fibre optic devices
  • BS EN 61300-2-44:2009 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Flexing of the strain relief of fibre optic devices
  • BS EN IEC 61300-3-35:2022 Tracked Changes. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Visual inspection of fibre optic connectors and fibre-stub transceivers
  • BS EN 61300-3-1:2005 Fire optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-1: Examinations and measurements - Visual examination
  • BS EN 61300-3-1:2006 Fire optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Visual examination
  • BS 6020-4:1981 Instruments for the detection of combustible gases - Specification for performance requirements for Group II instruments reading up to 100% lower explosive limit
  • BS EN 61300-2-33:2012 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Assembly and disassembly of fibre optic mechanical splices, fibre management systems and closures
  • BS EN 62150-4:2010 Fibre optic active components and devices - Test and measurement procedures - Relative intensity noise using a time-domain optical detection system
  • BS 6020-3:1982 Instruments for the detection of combustible gases - Specification for safety and performance requirements for Group I instruments reading up to 100% methane
  • BS EN 61300-3-2:2009 Fibre optic interconnecting devices and passive components — Basic test and measurement procedures — Part 3-2: Examinations and measurements — Polarization dependent loss in a single-mode fibre optic device
  • BS EN 61300-3-53:2015 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Encircled angular flux (EAF) measurement method based on two-dimensional far field data from step index multimode waveguide (
  • DD IEC/PAS 61300-3-35:2002 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Fibre optic cylindrical connector endface visual inspection
  • BS EN 61300-2-37:2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Cable bending for fibre optic closures
  • BS EN 61300-2-37:2016 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Cable bending for fibre optic closures
  • BS EN 61300-3-33:1999 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Examinations and measurements - Ferrule withdrawal force - Ferrule withdrawal force
  • BS ISO 11843-7:2012 Capability of detection. Methodology based on stochastic properties of instrumental noise
  • BS EN 61300-2-44:2013 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Flexing of the strain relief of fibre optic devices
  • BS EN 61300-2-38:2006 Fibre optic interconnecting devices and passive components — Basic test and measurement procedures — Part 2-38: Tests — Sealing for pressurized fibre optic closures
  • BS EN 61300-2-38:2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Sealing for pressurized fibre optic closures

(U.S.) Telecommunications Industries Association , Fiber Testing Instruments

  • TIA-455-219-A-2008 Examinations and measurements-Polish angle and fiber position on single ferrule multifiber connectors
  • TIA-455-48-B-1990 FOTP- 48 Measurement of Optical Fiber Cladding Diameter Using Laser-Based Instructions
  • TIA-455-48-B-2000(2014) FOTP- 48 Measurement of Optical Fiber Cladding Diameter Using Laser-Based Instructions
  • TIA-5430000-1989 Generic Specification Field Portable Electronic Instruments for Optical Fiber System

Qinghai Provincial Standard of the People's Republic of China, Fiber Testing Instruments

  • DB63/T 2115-2023 Guidelines for Maintenance of Instruments and Equipment of Inspection and Testing Institutions

SE-SIS, Fiber Testing Instruments

  • SIS SS 11 03 40-1983 Hardness test - Vickers test HV 0,2 to HV100- Direct verification of testing machines
  • SIS SS IEC 460:1983 Nuclear instrumentation - Portable prospecting radiation meters with gamma-ray scintillation detectors (linear scale instruments)

German Institute for Standardization, Fiber Testing Instruments

  • DIN 53808-1:2003 Testing of textiles - Determination of length of fibres by measuring of individual fibres
  • DIN 58141-7:1990 Testing of fibre optic elements; determination of tensile load of fibre optic cables
  • DIN 58141-4:1990 Testing of fibre optic elements; determination of diameters and thicknesses of optical fibres
  • DIN 53766-1:1991 Testing of glass fibre reinforced plastics apparatus and containers; determination of adhesive strength
  • DIN 54282:1971 Testing of textiles; determination of content of acetic acid of acetate or triacetate fibres
  • DIN EN 14488-7:2006 Testing sprayed concrete - Part 7: Fibre content of fibre reinforced concrete English version of DIN EN 14488-7:2006-08
  • DIN EN ISO 1973:2021-12 Textile fibres - Determination of linear density - Gravimetric method and vibroscope method (ISO 1973:2021); German version EN ISO 1973:2021
  • DIN 58141-9:1995 Testing of fibre optic elements - Part 9: Determination of deviation of the roundness and the concentricity of optical fibres
  • DIN 58141-5:1993 Testing of fibre optic elements; determination of the rate of broken fibres of light and image conductors
  • DIN 18723-4:1990 Field procedure for precision testing of surveying instruments; optical distance measuring instruments
  • DIN 18723-2:1990 Field procedure for precision testing of surveying instruments; levels
  • DIN 18723-3:1990 Field procedure for precision testing of surveying instruments; theodolites
  • DIN 18723-7:1990 Field procedure for precision testing of surveying instruments; gyroscopes
  • DIN 53814:1974 Testing of textiles; determination of water retention power of fibres and yarn cuttings
  • DIN 53941:1983 Testing of textiles; determination of micronaire value of cotton fibres
  • DIN 54275:1977 Testing of textiles; determination of the pH value of fibre materials, method of extrapolation
  • DIN 52187:1979 Testing of wood; determination of ultimate shearing stress parallel to grain
  • DIN 52316:1970 Testing of glass; determination of stiffness of continuous filament glass fibre rovings
  • DIN EN ISO 1973:2020 Textile fibres - Determination of linear density - Gravimetric method and vibroscope method (ISO/DIS 1973:2020); German and English version prEN ISO 1973:2020
  • DIN EN 1787:2019 Foodstuffs - Detection of irradiated food containing cellulose by ESR spectroscopy; German and English version prEN 1787:2019
  • DIN 54270-4:1977 Testing of textiles; determination of the limit-viscosity of celluloses, nitrate procedure
  • DIN EN 1170-2:1998 Precast concrete products - Test method for glass-fibre reinforced cement - Part 2: Measuring the fibre content in fresh GRC; "wash out test"; German version EN 1170-2:1997
  • DIN EN 1787:2022 Foodstuff - Detection of irradiated foodstuff containing cellulose by ESR spectroscopy
  • DIN EN 1787:2022-08 Foodstuff - Detection of irradiated foodstuff containing cellulose by ESR spectroscopy; German version EN 1787:2022
  • DIN IEC 61577-3:2012 Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 3: Specific requirements for radon decay product measuring instruments (IEC 61577-3:2011)
  • DIN 52351:1956 Testing of wood fibre boards; determination of the moisture content, the absorption of water and the thickness swell
  • DIN EN ISO 22232-1:2021-09 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1: Instruments (ISO 22232-1:2020); German version EN ISO 22232-1:2020
  • DIN 54270-1:1976 Testing of textiles; determination of the limit-viscosity of celluloses, principles
  • DIN 18723-6:1990 Field procedure for precision testing of surveying instruments; electro-optical distance measuring instruments for short ranges
  • DIN IEC 60412:2007 Nuclear instrumentation - Scintillation detectors - Nomenclature (identification) - Standard dimensions of scintillators (IEC 60412:2007)
  • DIN EN 1787:2000 Foodstuffs - Detection of irradiated food containing cellulose by ESR spectroscopy; German version EN 1787:2000
  • DIN EN 872:2005-04 Water quality - Determination of suspended solids - Method by filtration through glass fibre filters; German version EN 872:2005
  • DIN 53178:1969 Testing of paints, varnishes and similar products; determination of nitro cellulose content of lacquers
  • DIN EN 61300-3-20:2002 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-20: Examinations and measurements; Directivity of fibre optic branching devices (IEC 61300-3-20:2001); German version EN 61300-3-20:2001
  • DIN EN 14278-1:2004 Textiles - Determination of cotton fibre stickiness - Part 1: Method using a manual thermodetection device; German version EN 14278-1:2004
  • DIN EN 14278-1:2004-08 Textiles - Determination of cotton fibre stickiness - Part 1: Method using a manual thermodetection device; German version EN 14278-1:2004
  • DIN 54500:2004 Testing of paper - Determination of the density-related light-scattering and absorption coefficients of paper and fibre materials
  • DIN 52275-2:1978 Testing of mineral fibrous insulating materials; determination of linear dimensions and bulk density, casings
  • DIN EN IEC 61300-3-35:2019-07 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-35: Examinations and measurements - Visual inspection of fibre optic connectors and fibre-stub transceivers (IEC 86B/4161/CD:2018); Text in Germ...
  • DIN EN 61300-3-35:2016-04 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-35: Examinations and measurements - Visual inspection of fibre optic connectors and fibre-stub transceivers (IEC 61300-3-35:2015); German versio...
  • DIN EN 872:2005 Water quality - Determination of suspended solids - Method by filtration through glass fibre filters; German version EN 872:2005
  • DIN 18723-1:1990 Field procedure for precision testing of surveying instruments; general information
  • DIN EN 14278-2:2004-05 Textiles - Determination of cotton fibre stickiness - Part 2: Method using an automatic thermodetection plate device; German version EN 14278-2:2004
  • DIN EN 61300-3-51:2015 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-51: Examinations and measurements - Pin gauge withdrawal force for rectangular ferrule multi-fibre connectors (IEC 61300-3-51:2014); German version
  • DIN EN ISO 1973:2021 Textile fibres - Determination of linear density - Gravimetric method and vibroscope method (ISO 1973:2021); German version EN ISO 1973:2021
  • DIN EN 61300-3-40:1998 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-40: Examinations and measurements; Extinction ratio of a polarization maintaining (pm) fibre pigtailed connector (IEC 61300-3-40:1998); German vers
  • DIN EN IEC 61300-3-35:2023-11 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-35: Examinations and measurements - Visual inspection of fibre optic connectors and fibre-stub transceivers (IEC 61300-3-35:2022); German versio...
  • DIN EN ISO 22232-1:2018 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments (ISO/DIS 22232-1:2018); German and English version prEN ISO 22232-1:2018

Korean Agency for Technology and Standards (KATS), Fiber Testing Instruments

  • KS C 6597-2007(2018) Installation, operation and maintenance of carbon monoxide detection instruments
  • KS C 6593-2007(2018) Installation, operation and maintenance of toxic gas-Detection instruments:Hydrogen sulfide
  • KS C 6595-2007(2018) Installation, operation and maintenance of instruments used to detect oxygen-deficient/oxygen-enriched atmospheres
  • KS K ISO 2646:2012 Wool-Measurement of the length of fibres processed on the worsted system, using a fibre diagram machine
  • KS C 6599-2007(2018) Installation, operation and maintenance of combustible gases detection instruments in domestic premises
  • KS C 6591-2007(2018) Installation, operation and maintenance of combustible gas detection instruments
  • KS C IEC 61888:2012 Nuclear power plants-Instrumentation important to safety-Determination and maintenance of trip setpoints
  • KS C IEC 61300-3-36-2002(2017) Fibre optic interconnecting devices and passive components-Basic test and measurement procedures-Part 3-36:Examination and measurements-Measurement methods for the inside and outside diameters of fibr
  • KS C IEC 61300-3-24:2008 Fibre optic interconnecting devices and passive components-Basic test and measurement procedures-Part 3-24:Examinations and measurements-Keying accuracy of optical connectors for polarization maintaining fibre
  • KS B ISO 12710:2021 Non-destructive testing — Ultrasonic inspection — Evaluating electronic characteristics of ultrasonic test instruments
  • KS C IEC 61300-3-36:2002 Fibre optic interconnecting devices and passive components-Basic test and measurement procedures-Part 3-36:Examination and measurements-Measurement methods for the inside and outside diameters of fibre optic connector ferrules
  • KS C IEC 61300-3-36-2002(2022) Fibre optic interconnecting devices and passive components-Basic test and measurement procedures-Part 3-36:Examination and measurements-Measurement methods for the inside and outside diameters of fibr
  • KS B 5648-2002 Pressure test method and vacuum vessel leak detection methodusing mass spectrometer
  • KS M 3082-2007 Test methods for shear properties of fiber reinforced plastics by the V-notched specimen
  • KS C IEC 61300-3-24-2008(2018) Fibre optic interconnecting devices and passive components-Basic test and measurement procedures-Part 3-24:Examinations and measurements-Keying accuracy of optical connectors for polarization maintain
  • KS C IEC 61300-3-20:2004 Fibre optic interconnecting devices and passive components-Basic test and measurement procedures-Part 3-20:Examinations and measurements-Directivity of fibre optic branching devices
  • KS C IEC 61300-3-20:2014 Fibre optic interconnecting devices and passive components — Basic test and measurement procedures — Part 3-20: Examinations and measurements — Directivity of fibre optic branching devices
  • KS C IEC 61300-3-30:2004 Fibre optic interconnecting devices and passive components-Basic test and measurement procedures-Part 3-30:Examinations and measurements-Polish angle and fibre position on single ferrule multifibre connectors
  • KS C IEC 61300-3-30:2014 Fibre optic interconnecting devices and passive components — Basic test and measurement procedures — Part 3-30: Examinations and measurements — Polish angle and fibre position on single ferrule multifibre connectors
  • KS C 6592-2007(2018) Performance requirements for toxic gas-Detection instruments:Hydrogen sulfide
  • KS C 6591-2007 Installation, operation and maintenance of combustible gas detection instruments
  • KS C 6597-2007 Installation, operation and maintenance of carbon monoxide detection instruments
  • KS B ISO 12710:2005 Non-destructive testing-Ultrasonic inspection-Evaluating electronic characteristics of ultrasonic test instruments
  • KS B 5648-2002(2017) Pressure test method and vacuum vessel leak detection methodusing mass spectrometer
  • KS C 6594-2007(2018) Performance requirements for instruments used to detect oxygen-deficient/oxygen-enriched atmospheres
  • KS C IEC 60988:2012 Nuclear power plants-Instrumentation important to safety- Acoustic monitoring systems for detection of loose parts: characteristics, design criteria and operational procedures
  • KS C IEC 61300-3-5:2008 Fibre optic interconnecting devices and passive components-Basic test and measurement procedures-Part 3-5:Examinations and measurements-Wavelength dependence of attenuation
  • KS C IEC 61300-3-5:2011 Fibre optic interconnecting devices and passive components-Basic test and measurement procedures-Part 3-5:Examinations and measurements-Wavelength dependence of attenuation
  • KS C 6596-2007(2018) Performance requirements for carbon monoxide detection instrument(50∼1 000 ppm full scale)
  • KS C IEC 61300-3-30:2020 Fibre optic interconnecting devices and passive components — Basic test and measurement procedures — Part 3-30: Examinations and measurements — Polish angle and fibre position on single ferrule multif

KR-KS, Fiber Testing Instruments

  • KS C 6591-2007(2023) Installation, operation and maintenance of combustible gas detection instruments
  • KS C 6597-2007(2023) Installation, operation and maintenance of carbon monoxide detection instruments
  • KS C 6593-2007(2023) Installation, operation and maintenance of toxic gas-Detection instruments:Hydrogen sulfide
  • KS C 6595-2007(2023) Installation, operation and maintenance of instruments used to detect oxygen-deficient/oxygen-enriched atmospheres
  • KS C 6599-2007(2023) Installation, operation and maintenance of combustible gases detection instruments in domestic premises
  • KS B ISO 12710-2021 Non-destructive testing — Ultrasonic inspection — Evaluating electronic characteristics of ultrasonic test instruments
  • KS K 5578-2023 Detection of landfowl feather fiber in plumage — Light microscopy method
  • KS C 6592-2007(2023) Performance requirements for toxic gas-Detection instruments:Hydrogen sulfide
  • KS C 6594-2007(2023) Performance requirements for instruments used to detect oxygen-deficient/oxygen-enriched atmospheres
  • KS C IEC 61300-3-5-2008 Fibre optic interconnecting devices and passive components-Basic test and measurement procedures-Part 3-5:Examinations and measurements-Wavelength dependence of attenuation
  • KS C 6596-2007(2023) Performance requirements for carbon monoxide detection instrument(50∼1 000 ppm full scale)
  • KS C IEC 61300-3-30-2020 Fibre optic interconnecting devices and passive components — Basic test and measurement procedures — Part 3-30: Examinations and measurements — Polish angle and fibre position on single ferrule multif

International Electrotechnical Commission (IEC), Fiber Testing Instruments

  • IEC 61300-3-35:2015 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-35: Examinations and measurements - Visual inspection of fibre optic connectors and fibre-stub transceivers
  • IEC 61300-3-35:2022 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-35: Examinations and measurements - Visual inspection of fibre optic connectors and fibre-st
  • IEC 61300-3-20:2001 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-20: Examinations and measurements; Directivity of fibre optic branching devices
  • IEC 61300-3-2:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-2: Examination and measurements - Polarization dependent loss in a single-mode fibre optic device
  • IEC PAS 61300-3-43:2006 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-43: Examinations and measurements - Mode transfer function measurement for fibre optic sources
  • IEC 61300-3-2:1999 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-2: Examinations and measurements - Polarization dependence of attenuation in a single-mode fibre optic device
  • IEC 61300-3-35:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-35: Examinations and measurements - Fibre optic connector endface visual and automated inspection
  • IEC 61290-1-1:1998 Optical fibre amplifiers - Basic specification - Part 1-1: Test methods for gain parameters - Optical spectrum analyzer
  • IEC 61290-1-2:1998 Optical fibre amplifiers - Basic specification - Part 1-2: Test methods for gain parameters - Electrical spectrum analyzer
  • IEC 61290-5-1:2000 Optical fibre amplifiers - Basic specification - Part 5-1: Test methods for reflectance parameters - Optical spectrum analyser
  • IEC 61300-3-37:2005 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-37: Examinations and measurements - Endface angle of angle-polished optical fibres
  • IEC 61300-3-13:1995 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-13: Examinations and measurements - Control stability of a fibre optic switch
  • IEC 61290-2-1:1998 Optical fibre amplifiers - Basic specification - Part 2-1: Test methods for optical power parameters - Optical spectrum analyzer
  • IEC 61290-2-2:1998 Optical fibre amplifiers - Basic specification - Part 2-2: Test methods for optical power parameters - Electrical spectrum analyzer
  • IEC 61300-3-30:2004 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-30: Examinations and measurements - Polish angle and fibre position on single ferrule multifibre connectors
  • IEC 61300-3-43:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-43: Examinations and measurements - Mode transfer function measurement for fibre optic sources
  • IEC 61300-2-50:2007/COR1:2015 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-50: Tests - Fibre optic connector proof test with static load - Singlemode and multimode
  • IEC 61300-2-50:2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-50: Tests - Fibre optic connector proof test with static load - Singlemode and multimode
  • IEC 60412:2007 Nuclear instrumentation - Scintillation detectors - Nomenclature (Identification) - Standard dimensions of scintillators
  • IEC 62755:2012/AMD1:2020 Radiation protection instrumentation - Data format for radiation instruments used in the detection of illicit trafficking of radioactive materials
  • IEC 62397:2007 Nuclear power plants - Instrumentation and control important to safety - Resistance temperature detectors
  • IEC 61300-3-31:2003 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-31: Examinations and measurements; Coupled power ratio measurement for fibre optic sources
  • IEC 61300-3-1:1995 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-1: Examinations and measurements - Visual examination
  • IEC 61300-3-1:2005 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-1: Examinations and measurements - Visual examination
  • IEC 61300-3-36:2000 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-36: Examinations and measurements - Measurement methods for the inside and outside diameters of fibre optic connector ferrules
  • IEC 61300-3-51:2014 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-51: Examinations and measurements - Pin gauge withdrawal force for rectangular ferrule multi-fibre connectors
  • IEC 61300-3-24:2006 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-24: Examinations and measurements - Keying accuracy of optical connectors for polarization maintaining fibre
  • IEC 61300-3-40:1998 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-40: Examinations and measurements - Extinction ratio of a polarization maintaining (pm) fibre pigtailed connector
  • IEC 61300-2-44:2008 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices
  • IEC 61300-2-44:2004 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices
  • IEC 60988:2009 Nuclear power plants - Instrumentation important to safety - Acoustic monitoring systems for detection og loose parts: characteristics, design criteria and operational procedures
  • IEC 62150-4:2009 Fibre optic active components and devices - Test and measurement procedures - Part 4: Relative intensity noise using a time-domain optical detection system
  • IEC 61300-3-53:2020 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-53: Examinations and measurements - Encircled angular flux (EAF) measurement method based on
  • IEC 61300-3-53:2020 RLV Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-53: Examinations and measurements - Encircled angular flux (EAF) measurement method based on
  • IEC 61300-3-23:1998 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-23: Examination and measurements; fibre position relative to ferrule endface
  • IEC 61300-3-53:2015 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-53: Examinations and measurements - Encircled angular flux (EAF) measurement method based on two-dimensional far field data from step index multimo
  • IEC 61300-3-29:2014 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-29: Examinations and measurements - Spectral transfer characteristics of DWDM devices
  • IEC 61300-3-34:2001 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-34: Examinations and measurements; Attenuation of random mated connectors
  • IEC 61300-3-18:2005 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-18: Examinations and measurements - Keying accuracy of an angled endface connector
  • IEC 61300-3-34:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-34: Examinations and measurements - Attenuation of random mated connectors

AENOR, Fiber Testing Instruments

  • UNE 40208:1976 WOOL-MEASUREMENT OF THE LENGTH OF FIBRES PROCESSED ON THE WORSTED SYSTEM, USING A FIBRE DIAGRAM MACHINE
  • UNE 40162-4:1975 PRECISION OF THE RESULTS OF THE TEST IN THE "AIR-FLOW" APPARATUS TO DETERMINE AVERAGE DIAMETER OF WOOL FIBRES.
  • UNE 40162-1:1975 METHOD TO MEASURE AVERAGE DIAMETER OF WOOL FIBRES IN THE FORM OF COMBING WITH "AIR-FLOW" APPARATUS.
  • UNE-EN ISO 1973:1996 TEXTILE FIBRES. DETERMINATION OF LINEAR DENSITY. GRAVIMETRIC METHOD ANd vibroscope method. (ISO 1973:1995).
  • UNE-EN 14278-1:2004 Textiles - Determination of cotton fibre stickiness - Part 1: Method using a manual thermodetection device
  • UNE-EN 1787:2001 Foodstuffs - Detection of irradiated food containing cellulose by ESR spectroscopy
  • UNE 4036:1979 INSPECTION OF TOLERANCES OF PLAIN WORKPIECES. INDICATING MEASURING INSTRUMENTS.
  • UNE-EN 12668-1:2010 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments
  • UNE 40162-3:1975 CORRECTION OF ATMOSPHERIC PRESSURE AND TEMPERATURE IN MEASUREMENTS MADE WITH "AIR-FLOW" APPARATUS TO DETEMINE AVERAGE DIAMETER OF WOOL FIBRES.
  • UNE-EN 14278-2:2004 Textiles - Determination of cotton fibre stickiness - Part 2: Method using an automatic thermodetection plate device

Professional Standard - Agriculture, Fiber Testing Instruments

  • NY/T 2222-2012 Test for the average diameter and component of animal fiber.Microscopic image analyser
  • 农业部公告第2079号 Announcement on the results of sampling and testing the fiber quality of the main cotton varieties

Sichuan Provincial Standard of the People's Republic of China, Fiber Testing Instruments

  • DB51/T 2159-2016 Maintenance Guide for Laboratory Testing Instruments and Equipment

Group Standards of the People's Republic of China, Fiber Testing Instruments

  • T/LZZLXH 064-2021 Specifications for maintenance of laboratory testing instruments and equipment

ZA-SANS, Fiber Testing Instruments

  • SANS 4044:2007 Methods for determination of fibre length by comb sorter diagram
  • SANS 61779-6:1999 Electrical apparatus for the detection and measurement of flammable gases Part 6: Guide for the selection, installation, use and maintenance of apparatus for the detection and measurement of flammable gases
  • SANS 1698:2007 Verification standards for the verification of volume-measuring instruments, including commercial standards of volume
  • SANS 1697:2007 Verification standards for the verification of mass-measuring instruments, including commercial standard masspieces

BR-ABNT, Fiber Testing Instruments

NL-NEN, Fiber Testing Instruments

IN-BIS, Fiber Testing Instruments

Association Francaise de Normalisation, Fiber Testing Instruments

  • NF A09-320-1:2010 Non-destructive testing - Characterization and verification of ultrasonic testing equipment - Part 1 : instruments.
  • NF EN IEC 61757-3-2:2022 Capteurs fibroniques - Partie 3-2 : Détection acoustique et mesure des vibrations - Détections réparties
  • NF EN ISO 1973:2021 Fibres textiles - Détermination de la masse linéique - Méthode gravimétrique et méthode au vibroscope
  • NF C93-903-37*NF EN 61300-3-37:2005 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-37 : examinations and measurements - Endface angle of angle-polished optical fibres
  • NF C93-903-30*NF EN 61300-3-30:2004 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-30 : examinations and measurements - Polish angle and fibre position on single ferrule multifibre connectors
  • NF G07-350*NF EN ISO 1973:2021 Textile fibres - Determination of linear density - Gravimetric method and vibroscope method
  • NF G07-350:1996 Textile fibres. Determination of linear density. Gravimetric method and vibroscope method.
  • NF C93-903-31*NF EN 61300-3-31:2003 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-31 : examinations and measurements - Coupled power ratio measurement for fibre optic sources.
  • NF V03-003*NF EN 1787:2022 Foodstuffs - Detection of irradiated food containing cellulose by ESR spectroscopy
  • NF C93-903-1*NF EN 61300-3-1:2006 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-1 : examinations and measurements - Visual examination
  • NF EN 13625:2002 Essais non destructifs - Contrôle d'étanchéité - Guide pour la sélection des instruments utilisés pour le mesurage des fuites gazeuses
  • NF A09-462*NF EN 13625:2002 Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage.
  • NF EN 1787:2022 Produits alimentaires - Détection par spectroscopie RPE d'aliments ionisés contenant de la cellulose
  • NF C23-541-2:2005 Specification for open path apparatus for the detection of combustible or toxic gases and vapours - Part 2 : performance requirements for apparatus for the detection of combustible gases.
  • NF G07-220-1*NF EN 14278-1:2004 Textiles - Determination of cotton fibre stickiness - Part 1 : method using a manual thermodetection device
  • NF C93-903-2*NF EN 61300-3-2:2014 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-2 : examination and measurements - Polarisation dependent loss in a single-mode fibre optic device
  • NF EN 61300-3-43:2009 Dispositifs d'interconnexion et composants passifs fibroniques - Procédures fondamentales d'essais et de mesures - Partie 3-43 : examens et mesures - Mesure de la fonction de transfert modal pour sources fibroniques
  • NF A09-320-2:2010 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2 : probes.
  • NF A09-320-1*NF EN ISO 22232-1:2020 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1 : instruments
  • NF C93-903-24*NF EN 61300-3-24:2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-24 : examinations and measurements - Keying accuracy of optical connectors for polarization maintaining fibre
  • NF A09-320:1984 NON DESTRUCTIVE TESTING. MANUAL ULTRASONIC INSPECTION OF METALLIC PRODUCTS. SIMPLE IN-SERVICE CHECKING OF APPARATUS CHARACTERISTICS.
  • NF C93-903-45*NF EN 61300-3-45:2011 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-45 : examinations and measurements - Attenuation of random mated multi-fibre connectors
  • NF A09-321:1988 Non destructive testing. Ultrasonic testing. Methods for specifying ultrasonic apparatus.
  • NF C19-534*NF EN 62534:2016 Radiation protection instrumentation - Highly sensitive hand-held instruments for neutron detection of radioactive material
  • NF C19-533*NF EN 62533:2016 Radiation protection instrumentation - Highly sensitive hand-held instruments for photon detection of radioactive material
  • NF EN 62534:2016 Instrumentation pour la radioprotection - Instruments portables de haute sensibilité pour la détection neutronique de matières radioactives
  • NF EN 62533:2016 Instrumentation pour la radioprotection - Instruments portables de haute sensibilité pour la détection photonique de matières radioactives
  • NF EN 588-2:2002 Tuyaux en fibres-ciment pour branchements et collecteurs - Partie 2 : regards de visite et chambres d'inspection
  • NF C93-903-10*NF EN 61300-3-10:2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-10 : examinations and measurements - Gauge retention force
  • NF EN 872:2005 Qualité de l'eau - Dosage des matières en suspension - Méthode par filtration sur filtre en fibres de verre
  • NF EN 14278-1:2004 Textiles - Détermination du collage des fibres de coton - Partie 1 : méthode utilisant un dispositif manuel de thermodétection
  • NF C93-903-35*NF EN 61300-3-35:2015 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-35 : examinations and measurements - Visual inspection of fibre optic connectors and fibre-stub transceivers
  • NF EN IEC 61300-3-35:2022 Dispositifs d'interconnexion et composants passifs fibroniques - Procédures fondamentales d'essais et de mesures - Partie 3-35 : examens et mesures - Examen visuel des connecteurs fibroniques et des émetteurs récepteurs à embase fibrée
  • NF T90-105*NF EN 872:2005 Water quality - Determination of suspended solids - Method by filtration through glass fibre filters.
  • NF G07-220-3*NF EN 14278-3:2004 Determination of the stickiness of cotton fibres - Part 3 : method using an automatic thermodetection rotating drum device
  • NF A09-320-2/A1:2005 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2 : probes.
  • NF C19-147*NF EN IEC 63047:2021 Nuclear instrumentation - Data format for list mode digital data acquisition used in radiation detection and measurement
  • NF C93-902-44:2005 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44 : tests - Flexing of the strain relief of fibre optic devices.
  • NF EN 14278-3:2004 Textiles - Détermination du collage des fibres de coton - Partie 3 : méthode utilisant un dispositif automatique de thermodétection à tambour rotatif
  • NF C23-558:1992 Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for group II apparatus indicating up to 100 per cent (V/V) gas.
  • NF C93-903-34:2004 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-34 : examinations and measurements - Attenuation of random mated connectors.
  • NF C93-903-29*NF EN 61300-3-29:2014 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-29 : examinations and measurements - Spectral transfer characteristics of DWDM devices

American National Standards Institute (ANSI), Fiber Testing Instruments

American Society for Testing and Materials (ASTM), Fiber Testing Instruments

  • ASTM D5867-05 Standard Test Methods for Measurement of Physical Properties of Cotton Fibers by High Volume Instruments
  • ASTM D5867-95 Standard Test Methods for Measurement of Physical Properties of Cotton Fibers by High Volume Instruments
  • ASTM D5867-12(2020) Standard Test Methods for Measurement of Physical Properties of Cotton Fibers by High Volume Instruments
  • ASTM D5866-95 Standard Test Method for Neps in Cotton Fibers (AFIS-N Instrument)
  • ASTM D5866-05 Standard Test Method for Neps in Cotton Fibers (AFIS-N Instrument)
  • ASTM D5866-12 Standard Test Method for Neps in Cotton Fibers
  • ASTM D5867-12 Standard Test Methods for Measurement of Physical Properties of Raw Cotton by Cotton Classification Instruments
  • ASTM D5867-12e1 Standard Test Methods for Measurement of Physical Properties of Raw Cotton by Cotton Classification Instruments
  • ASTM E2852-13(2021) Standard Guide for Acquisition, Maintenance, Storage, and Use of Hazardous Material Detection Instrumentation
  • ASTM D6500-00(2006) Standard Test Method for Diameter of Wool and Other Animal Fibers Using an Optical Fiber Diameter Analyser
  • ASTM D6500-00 Standard Test Method for Diameter of Wool and Other Animal Fibers Using an Optical Fiber Diameter Analyser
  • ASTM D6466-10(2018) Standard Test Method for Diameter of Wool and Other Animal Fibers By Sirolan-Laserscan Fiber Diameter Analyser
  • ASTM D6466-10 Standard Test Method for Diameter of Wool and Other Animal Fibers By Sirolan-Laserscan Fiber Diameter Analyser
  • ASTM D6466-99(2005) Standard Test Method for Diameter of Wool and Other Animal Fibers By Sirolan-Laserscan Fiber Diameter Analyser
  • ASTM D6466-99 Standard Test Method for Diameter of Wool and Other Animal Fibers By Sirolan-Laserscan Fiber Diameter Analyser
  • ASTM D1683/D1683M-11 Standard Test Method for Failure in Sewn Seams of Woven Apparel Fabrics
  • ASTM E499-95(2006) Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode
  • ASTM D6500-00(2012)e1 Standard Test Method for Diameter of Wool and Other Animal Fibers Using an Optical Fiber Diameter Analyser
  • ASTM E499/E499M-11 Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode
  • ASTM E2852-13 Standard Guide for Acquisition, Maintenance, Storage, and Use of Hazardous Material Detection Instrumentation
  • ASTM E499-95(2000) Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode
  • ASTM E499/E499M-11(2017) Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode
  • ASTM E4-08 Standard Practices for Force Verification of Testing Machines
  • ASTM E4-09 Standard Practices for Force Verification of Testing Machines
  • ASTM E4-09a Standard Practices for Force Verification of Testing Machines
  • ASTM E1067-01 Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels
  • ASTM E1067-96 Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels
  • ASTM E2076/E2076M-10 Standard Test Method for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Emission
  • ASTM E2439-05 Standard Guide for Instrumentation, Sensors and Operating Software Used in Forensic Psychophysiological Detection of Deception (Polygraph) Examinations
  • ASTM E2439-09(2016) Standard Guide for Instrumentation, Sensors and Operating Software Used in Forensic Psychophysiological Detection of Deception (Polygraph) Examinations
  • ASTM E317-94 Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse- Echo Examination Instruments and Systems Without the Use of Electronic Measurement Instruments
  • ASTM E1324-21 Standard Guide for Measuring Some Electronic Characteristics of Ultrasonic Testing Instruments
  • ASTM E1067-07 Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels
  • ASTM E1888/E1888M-07 Standard Practice for Acoustic Emission Examination of Pressurized Containers Made of Fiberglass Reinforced Plastic with Balsa Wood Cores

GOSTR, Fiber Testing Instruments

International Organization for Standardization (ISO), Fiber Testing Instruments

  • ISO 2646:1974 Wool - Measurement of the Length of Fibres Processed on the Worsted System, Using a Fibre Diagram Machine First Edition
  • ISO 17504:1999 Textile floor coverings - Determination of wool fibre integrity using an abrasion machine
  • ISO 22232-1:2020 Non-destructive testing — Characterization and verification of ultrasonic test equipment — Part 1: Instruments
  • ISO 10109-7:2001 Optics and optical instruments - Environmental requirements - Part 7: Test requirements for optical measuring instruments
  • ISO 12710:2002 Non-destructive testing - Ultrasonic inspection - Evaluation electronic characteristics of untrasonic test instruments
  • ISO 20921:2019 Textiles — Determination of stable nitrogen isotope ratio in cotton fibres

NZ-SNZ, Fiber Testing Instruments

  • SAA/SNZ HB 86.2-1998 Guide to the Selection, Care, Calibration and Checking of Measuring Instruments in Industry Part 2: Simple Length and Angle Measuring Instruments
  • SAA/SNZ HB 86.1-1996 Guide to the Selection, Care, Calibration and Checking of Measuring Instruments in Industry Part 1: General Principles
  • AS/NZS 4492.3:2000 Wool - Fleece Testing and Measurement Method 3: Measurement of Mean Fibre Diameter Using Airflow and Sonic A Instruments

AR-IRAM, Fiber Testing Instruments

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Fiber Testing Instruments

  • GB/T 18311.20-2007 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-20: Examinations and measurements irectivity of fibre optic branching devices
  • GB/T 9822-2008 Inspection of grain and oils.Determination of insoluble dietary fiber in cereals
  • GB/T 42399.1-2023 Nondestructive Testing Instruments Performance and Inspection of Phased Array Ultrasonic Equipment Part 1: Instrumentation
  • GB/T 18311.2-2001 Fibre optic interconnecting devices and passive components--Basic test and measurement procedures--Part 3-2: Examinations and measurements--Polarization dependence of a single--mode fibre optic device
  • GB/T 18311.31-2007 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-31 : Examinations and measurements Coupled power ratio measurement for fibre optic sources
  • GB/T 18311.40-2003 Fibre optic interconnecting devices and passive components-Basic test and measurement procedures-Part 3-40:Examinations and measurements-Extinction ratio of a polarization maintaining(pm)fibre pigtailed connector
  • GB/T 29302-2012 Non-destructive testing instruments.Characterization and verification of phased array ultrasonic examination systems
  • GB/T 42870-2023 Acoustic Emission Testing Method and Evaluation Criteria for Nondestructive Testing of Fiber Reinforced Polymers
  • GB/T 27664.1-2011 Non-destructive testing.Characterization and verification of ultrasonic test equipment.Part 1:Instruments
  • GB/T 18311.26-2007 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-26: Examinations and measurements Measurement of the angular misalignment between fibre and ferrule axes
  • GB/T 18311.1-2003 Fibre optic interconnecting devices and passive components-Basic test and measurement procedures-Part 3-1:Examinations and measurements-Visual examination
  • GB/T 18311.30-2007 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-30: Examinations and measurements Polish angle and fibre position on single ferrule multifibre connectors
  • GB/T 18311.4-2003 Fibre optic interconnecting devices and passive components-Basic test and measurement procedures-Part 3-4:Examinations and measurements-Attenuation
  • GB/Z 41285.6-2022 Non-destructive testing instruments—Radiation protection rules for the technical application of sealed radioactive sources—Part 6:Inspection,service and functional test of mobile apparatus for γ radio
  • GB/T 18311.34-2003 Fibre optic interconnecting devices and passive components-Basic test and measurement procedures-Part 3-34:Examinations and measurements-Attenuation of random mated connectors
  • GB/T 18311.5-2003 Fibre optic interconnecting devices and passive components-Basic test and measurement procedures-Part 3-5:Examinations and measurements-Wavelength dependence of attenuation
  • GB/T 18311.6-2001 Fibre optic interconnecting devices and passive components--Basic test and measurement procedures--Part 3-6: Examinations and measurements--Return loss
  • GB/T 18311.28-2007 Fibre optic interconnecting devices and passive components.Basic test and measurement procedures.Part 3-28:Examinations and measurements.Transient loss

Indonesia Standards, Fiber Testing Instruments

Danish Standards Foundation, Fiber Testing Instruments

  • DS/EN ISO 1973:1996 Textile fibres - Determination of linear density - Gravimetric method and vibroscope method
  • DS/ISO 1973:2021 Textile fibres – Determination of linear density – Gravimetric method and vibroscope method
  • DS/EN ISO 1973:2021 Textile fibres – Determination of linear density – Gravimetric method and vibroscope method (ISO 1973:2021)
  • DS/EN 14278-1:2004 Textiles - Determination of cotton fibre stickiness - Part 1: Method using a manual thermodetection device
  • DS/EN 1787:2000 Foodstuffs - Detection of irradiated food containing cellulose by ESR spectroscopy
  • DS/EN 12668-1:2010 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments
  • DS/EN 872:2005 Water quality - Determination of suspended solids - Method by filtration through glass fibre filters
  • DS/EN 14278-2:2004 Textiles - Determination of cotton fibre stickiness - Part 2: Method using an automatic thermodection plate device

ES-UNE, Fiber Testing Instruments

  • UNE-EN ISO 1973:2022 Textile fibres - Determination of linear density - Gravimetric method and vibroscope method (ISO 1973:2021)
  • UNE-EN 1787:2022 Foodstuff - Detection of irradiated foodstuff containing cellulose by ESR spectroscopy
  • UNE-EN ISO 22232-1:2021 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1: Instruments (ISO 22232-1:2020)
  • UNE-EN 62534:2015 Radiation protection instrumentation - Highly sensitive hand-held instruments for neutron detection of radioactive material (Endorsed by AENOR in January of 2016.)
  • UNE-EN 62533:2016 Radiation protection instrumentation - Highly sensitive hand-held instruments for photon detection of radioactive material (Endorsed by AENOR in April of 2016.)
  • UNE-EN IEC 61300-3-35:2022 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-35: Examinations and measurements - Visual inspection of fibre optic connectors and fibre-stub transceivers (Endorsed by Asociación Española d...
  • UNE-EN 61300-3-35:2015 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-35: Examinations and measurements - Visual inspection of fibre optic connectors and fibre-stub transceivers (Endorsed by AENOR in November of 20...

CENELEC - European Committee for Electrotechnical Standardization, Fiber Testing Instruments

  • EN 50073:1999 Guide for Selection@ Installation@ Use and Maintenance of Apparatus for the Detection and Measurement of Combustible Gases or Oxygen

American Society of Mechanical Engineers (ASME), Fiber Testing Instruments

Japanese Industrial Standards Committee (JISC), Fiber Testing Instruments

  • JIS L 1030-3-1:2023 Testing methods for quantitative analysis of fibre mixtures of textiles -- Part 3-1: Instrumental analysis of some animal hair fibres -- Using MALDI-TOF MS testing methods for quantitative analysis of fibre mixtures
  • JIS C 61300-3-20:2009 Fiber optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 3-20: Examinations and measurements -- Directivity of fiber optic branching devices
  • JIS L 0809:2001 Instrumental determination of colour fastness -- Change in colour and staining
  • JIS K 7084:1993 Testing method for impact properties of carbon fibre reinforced plastics by instrumented 3-point bending impact test
  • JIS C 61300-3-43:2012 Fiber optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 3-43: Examinations and measurements -- Mode transfer function measurement for fiber optic sources

International Telecommunication Union (ITU), Fiber Testing Instruments

  • ITU-T Q.138-1988 Instruments for checking equipment and measuring signals
  • ITU-T O.11-1992 Maintenance Access Lines - Specifications of Measuring Equipment (Study Group IV) 10 pp

Professional Standard - Customs, Fiber Testing Instruments

  • HS/T 29-2010 Quantitative analysis of the content of carbon in carbon fiber method by high frequency infrared carbon sulphur analyzer

European Committee for Standardization (CEN), Fiber Testing Instruments

  • EN 13625:2001 Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage
  • EN ISO 22232-1:2020 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1: Instruments (ISO 22232-1:2020)
  • EN 1787:1996 (WITHDRAWN) Foodstuffs - Detection of Irradiated Food Containing Cellulose - Method by ESR Spectroscopy Superseded by EN 1787:2000
  • EN 14278-1:2004 Textiles - Determination of cotton fibre stickiness - Part 1: Method using a manual thermodetection device
  • EN 1813:1997 Textile Floor Coverings - Determination of Wool Fibre Integrity Using an Abrasion Machine
  • EN 1787:2000 Foodstuffs - Detection of irradiated food containing cellulose by ESR spectroscopy
  • EN 872:2005 Water quality - Determination of suspended solids - Method by filtration through glass fibre filters
  • EN 872:1996 Water Quality - Determination of Suspended Solids - Method by Filtration Through Glass Fibre Filters

API - American Petroleum Institute, Fiber Testing Instruments

  • API 4109-1971 EVALUATION OF INSTRUMENTS FOR VEHICLE EXHAUST EMISSION INSPECTION

Lithuanian Standards Office , Fiber Testing Instruments

  • LST EN ISO 1973:2000 Textile fibres - Determination of linear density - Gravimetric method and vibroscope method (ISO 1973:1995)
  • LST EN 14278-1-2004 Textiles - Determination of cotton fibre stickiness - Part 1: Method using a manual thermodetection device
  • LST EN 1787-2000 Foodstuffs - Detection of irradiated food containing cellulose by ESR spectroscopy
  • LST EN 12668-1-2010 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments
  • LST EN 872-2005 Water quality - Determination of suspended solids - Method by filtration through glass fibre filters
  • LST EN 14278-2-2004 Textiles - Determination of cotton fibre stickiness - Part 2: Method using an automatic thermodetection plate device
  • LST EN ISO 22232-1:2020 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1: Instruments (ISO 22232-1:2020)
  • LST EN 61300-2-44-2014 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-44: Tests - Flexing of the strain relief of fibre optic devices (IEC 61300-2-44:2013)

CH-SNV, Fiber Testing Instruments

  • SN 214 051-1984 Testing of metallic materials; hardness fest on welds;Transverse sections of joint weldsGrundlage der vorliegenden Norm ist die Deutsche NormDIN 50163, Teil l (siehe Erl?uterungen).
  • SN EN ISO 22232-1:2020 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1: Instruments (ISO 22232-1:2020)

农业农村部, Fiber Testing Instruments

  • NY/T 2870-2015 Microscopic imaging method for rapid detection of linear density of jute and kenaf fibers

BE-NBN, Fiber Testing Instruments

PT-IPQ, Fiber Testing Instruments

RO-ASRO, Fiber Testing Instruments

  • STAS 8521-1977 TOPS AND CHEMICAL FIBRES OF WOOL TYPE TOPS Determination of wool fibre length barbe and hauteur using a comb.sorter
  • STAS SR 9028 Woolen tops and artificial fibres tops. Determination of defects with a control instrument and weight per meter assessment.
  • STAS 8283/1-1980 CORD FABRICS OF MAN-MADE FIBRES FOR TYRES Rules for quality checking and analysis methods and tests
  • STAS 7842-1980 FIBROUS AND COARSE FODDERS Rules and methods for quality checking, delivery, storage, transport and documents

IT-UNI, Fiber Testing Instruments

  • UNI EN ISO 22232-1:2021 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1: Instruments

RU-GOST R, Fiber Testing Instruments

  • GOST 8.490-1983 State system for ensuring the uniformity of measurements. Instruments for measurements of gear interaxial distance. Methods of verification

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Fiber Testing Instruments

  • IEEE N42.33-2003 Portable Radiation Detection Instrumentation for Homeland Security
  • IEEE N42.34-2003 Hand-held Instruments for the Detection and Identification of Radionuclides

US-FCR, Fiber Testing Instruments

  • FCR NE-F-3-11T-1972 MASS SPECTROMETER HELIUM LEAK DETECTION FOR INSTRUMENTS AND SMALL COMPONENTS (INACTIVE FOR NEW DESIGN)

European Committee for Electrotechnical Standardization(CENELEC), Fiber Testing Instruments

  • EN 62533:2016 Radiation protection instrumentation - Highly sensitive hand-held instruments for photon detection of radioactive material
  • EN 62534:2015 Radiation protection instrumentation - Highly sensitive hand-held instruments for neutron detection of radioactive material
  • EN 61300-3-35:2015 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-35: Examinations and measurements - Visual inspection of fibre optic connectors and fibre-stub transceivers
  • EN IEC 61300-3-35:2022 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-35: Examinations and measurements - Visual inspection of fibre optic connectors and fibre-stub transceivers

Standard Association of Australia (SAA), Fiber Testing Instruments

  • IEC 62755:2012+AMD1:2020 CSV Radiation protection instrumentation — Data format for radiation instruments used in the detection of illicit trafficking of radioactive materials
  • IEC 61300-3-35:2015 RLV Fibre optic interconnecting devices and passive components — Basic test and measurement procedures — Part 3-35: Examinations and measurements — Visual inspection of fibre optic connectors and fibre-stub transceivers

Professional Standard - Machinery, Fiber Testing Instruments

  • JB/T 11602.3-2013 Non-desturctive testing instruments.Measurement and evaluation of the X-ray tube voltage.Part 3: Spectrometric detect
  • JB/T 11602.1-2013 Non-destructive testing instruments.Measurement and evaluation of the X-ray tube voltage.Part 1: Voltage divider method

AT-ON, Fiber Testing Instruments

PL-PKN, Fiber Testing Instruments

  • PN T06702-1992 Power and energy measuring detectors, instruments and e?uipment for laser radiation
  • PN-EN ISO 22232-1-2021-02 E Non-destructive testing -- Characterization and verification of ultrasonic test equipment -- Part 1: Instruments (ISO 22232-1:2020)

AGMA - American Gear Manufacturers Association, Fiber Testing Instruments

  • 97FTM1-1997 Calibration of Gear Measuring Instruments and Their Application to the Inspection of Product Gears
  • 931-A02-2002 Calibration of Gear Measuring Instruments and Their Application to the Inspection of Product Gears

Xinjiang Provincial Standard of the People's Republic of China, Fiber Testing Instruments

  • DB65/T 4167-2018 Test method for average diameter, length and distribution of wool and other animal fibers

Underwriters Laboratories (UL), Fiber Testing Instruments

  • UL 920002 BULLETIN-2017 UL Standard for Safety Installation@ Operation@ and Maintenance of Toxic Gas-Detection Instruments (COMMENTS DUE: SEPTEMBER 25@ 2017)

国家市场监督管理总局、中国国家标准化管理委员会, Fiber Testing Instruments

  • GB/T 37492-2019 Inspection of grain and oils—Determination of soluble dietary fibre in cereals and cereals products—Enzyme gravimetric method

NO-SN, Fiber Testing Instruments

  • NS 1563-1972 ISO system for limits and fits - Inspection limits for indicating measuring instruments

Institute of Electrical and Electronics Engineers (IEEE), Fiber Testing Instruments

  • IEEE N322-1997 Inspection, test, construction, and performance requirements for direct reading electrostatic/electroscope type dosimeters




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved