ZH
RU
ES

Stability and Thermal Stability

Stability and Thermal Stability, Total:499 items.

In the international standard classification, Stability and Thermal Stability involves: Electromechanical components for electronic and telecommunications equipment, Petroleum products in general, Adhesives, Products of the chemical industry, Paint ingredients, Industrial trucks, Coals, Materials for the reinforcement of composites, Lubricants, industrial oils and related products, Waxes, bituminous materials and other petroleum products, Raw materials for rubber and plastics, Pesticides and other agrochemicals, Elements of buildings, Commercial vehicles, Plastics, Fuels, Refractories, Environmental protection, Fertilizers, Products of the textile industry, Leather technology, Electricity. Magnetism. Electrical and magnetic measurements, Insulating materials, Beverages, Agricultural machines, implements and equipment, Optoelectronics. Laser equipment, Protective equipment, Construction materials, Equipment for the metallurgical industry, Motor cycles and mopeds, Cycles, Structure and structure elements, Medical equipment, Protection against dangerous goods, Analytical chemistry, Glass, Insulating fluids, Testing of metals, Vocabularies, Heat recovery. Thermal insulation, Industrial automation systems, Thermodynamics and temperature measurements, Protection against fire, Organic chemicals, Non-ferrous metals, Protection of and in buildings, Hydraulic fluids, Furniture, Paints and varnishes, Insulation, Non-textile floor coverings, Photography, Wood, sawlogs and sawn timber, Burners. Boilers, Pulps, Semiconducting materials, Electrical wires and cables, Farming and forestry, Aids for disabled or handicapped persons, Aircraft and space vehicles in general, Earthworks. Excavations. Foundation construction. Underground works, Standardization. General rules, Environmental testing, Graphic technology, Lifting equipment, Dentistry, Cellular materials, Road vehicles in general, Iron and steel products.


Institute of Interconnecting and Packaging Electronic Circuits (IPC), Stability and Thermal Stability

CZ-CSN, Stability and Thermal Stability

International Truck and Engine Corporation (ITEC), Stability and Thermal Stability

KR-KS, Stability and Thermal Stability

Danish Standards Foundation, Stability and Thermal Stability

  • DS/EN ISO 10363:1996 Hot-melt adhesives - Determination of thermal stability
  • DS/EN ISO 8497:1997 Thermal insulation - Determination of steady-state thermal transmission properties of thermal insulation for circular pipes
  • DS/ISO 7172:1991 Furniture. Tables. Determination of stability
  • DS/INSTA 216:1990 Plastics pipes. Thermoanalytic test methods for the determination on oxidation stability
  • DS/ISO 8130-8:2021 Coating powders – Part 8: Assessment of the storage stability of thermosetting powders
  • DS/EN 1239:2011 Adhesives - Freeze-thaw stability
  • DS/EN 13631-2:2003 Explosives for civil uses - High explosives - Part 2: Determination of thermal stability of explosives
  • DS/EN ISO 23999:2012 Resilient floor coverings - Determination of dimensional stability and curling after exposure to heat
  • DS/EN 12458:1999 Surface active agents - Determination of stability in hard water

Korean Agency for Technology and Standards (KATS), Stability and Thermal Stability

International Federation of Trucks and Engines, Stability and Thermal Stability

PL-PKN, Stability and Thermal Stability

  • PN C04592-1972 Water and waste water , Determination coefficient of stability and thermostability of water
  • PN C89284-1986 Polyethylene Determination of thermooxidative stability
  • PN A86768-1967 Canned fish Termostat ?esting
  • PN F06105-1993 Furniture. Tables. Determination of stability
  • PN C89291 ArkusZ13-1973 Polyyinyl chloride resins Determrnatlon of ?he thermal s?abili?y by ?he discolorclion me?hod
  • PN C89291-13-1988 Poly(vinyl chloride) resins Determination of the thermal stability by the cliscoloration method
  • PN C89291-15-1991 Poly(vinyl chloride) resins Determination of the thermal stability by the pH method
  • PN C04404-20-1988 Pigments for paints General methods of test Determination of heat stability
  • PN F06103-1993 Furniture. Storage units. Determination of stability
  • PN C04084-1988 Determination of hydrolytic stability of hydraulic fluids
  • PN M73241-02-1992 Hydraulic fluid power Determination of characteristics of motors Startability
  • PN C04063-1966 Petroleum produc?s Thermal stabili?y of aviation turbin? fuels

Professional Standard - Commodity Inspection, Stability and Thermal Stability

  • SN/T 2902-2011 Screening experiments for thermal stability and air stability of dangerous goods

GM North America, Stability and Thermal Stability

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Stability and Thermal Stability

  • GB/T 2392-2014 Dyes.Determination of thermo stability
  • GB/T 2392-2006 Dyes.Determination of thermo stability
  • GB/T 16998-1997 Hot-melt adhesives--Determination of thermal stability
  • GB/T 31959-2015 Determination of thermal oxidative resistance of carbon fiber
  • GB/T 1573-2001 Determination of thermal stability of coal
  • GB/T 1670-1988 Plasticizers--Test method of heat-resistance
  • GB/T 23800-2009 Heat transfer fluids.Determination of thermal stability
  • GB/T 2392-1980 Determination of heat stability for reactive dyes
  • GB/T 1670-2008 Plasticizers-test method of heat-resistance
  • GB/T 19136-2003 Testing method for the storage stability at elevated temperature of pesticides
  • GB/T 17391-1998 Test method for thermal stability of polyethylene pipes and fittings
  • GB/T 3298-1991 Standard test method for thermal shock resistance of domestic ceramic ware
  • GB/T 41603.2-2022 Self-propelled agricultural machinery—Assessment of stability—Part 2：Determination of static stability and test procedures
  • GB/T 14235.9-1993 Testing method for thermal stability of pattern materials in investment casting
  • GB/T 21280-2007 Test method of thermal stability for dangerous products
  • GB/T 10701-1989 Test methods for thermal stability of silica glass
  • GB/T 10701-2008 Test methods for thermal stability of silica glass
  • GB/T 13464-1992 Thermal analysis test methods for thermal stability of materials
  • GB/T 13464-2008 Thermal analysis test methods for thermal stability of materials
  • GB/T 13475-2008 Thermal insulation.Determination of steady-state thermal transmission.Properties.Calibrated and guard hot box
  • GB/T 10296-2008 Thermal insulation-Determination of steady-state thermal transmission properties.Pipe insulation apparatus
  • GB/T 22232-2008 Test method for the thermal stability of chemicals by differential scanning calorimetry
  • GB/T 7193.5-1987 Unsaturated polyester resin--Determination of heat stability at 80 Centigrade
  • GB/T 11833-2014 Determination of steady-state thermal transmission properties of thermal insulation.Spherical method
  • GB/T 10296-1988 Thermal insulation--Determination of steady-state thermal transmission properties--Pipe insulation apparatus
  • GB/T 11833-1989 Thermal insulation--Determination of steady-state thermal transmission properties--Spherical method
  • GB/T 21782.8-2008 Coating powders.Part 8: Assessment of the storage stability of thermosetting powders
  • GB/T 29174-2012 Thermal analysis test method for constant-temperature stability of materials
  • GB/T 1603-2001 Determination method of emulsion stability for pesticide
  • GB/T 19137-2003 Testing method for the storage stability at low temperature of pesticides
  • GB/T 1640-1979 Determination of the stability of solubilised reduced dyes
  • GB/T 24175-2009 Test method for stability of steel slag
  • GB/T 24175-2009(英文版) Test method for stability of steel slag

Japanese Industrial Standards Committee (JISC), Stability and Thermal Stability

  • JIS D 6011:1999 Fork lift trucks -- Stability and stability tests
  • JIS D 6014:1982 Order picking trucks -- Stability and stability tests
  • JIS K 7212:1999 Plastics -- Determination of thermal stability of thermoplastics -- Oven method
  • JIS D 6013:1982 Side fork lift trucks -- Stability and stability tests
  • JIS D 6011:1993 Fork lift trucks -- Stability and stability tests
  • JIS C 2143-6:2014 Electrical insulating materials -- Thermal endurance properties -- Part 6: Determination of thermal endurance indices (temperature index and relative thermal endurance index) of an insulating material using the fixed time frame method
  • JIS D 6011-1:2013 Fork lift trucks.Stability and verification of stability .Part 1: General
  • JIS K 2540:1989 Testing method for thermal stability of lubricating oils
  • JIS A 1420:1999 Determination of steady-state thermal transmission properties -- Hot box method
  • JIS K 2540:2000 Petroleum products -- Lubricating oils -- Determination of thermal stability
  • JIS T 1190:1987 Stabilometers
  • JIS D 6012:1982 Reach fork lift trucks and straddle fork lift trucks -- Stability and stability tests
  • JIS S 1202:1998 Furniture -- Tables -- Determination of stability
  • JIS D 6011-5:2013 Fork lift trucks.Stability and verification of stability .Part 5: Single side loading trucks
  • JIS K 2514-2:2013 Lubricating oils -- Determination of oxidation stability -- Part 2: Oxidation stability of turbine oils
  • JIS K 2514-1:2013 Lubricating oils-Determination of oxidation stability.Part 1: Oxidation stability of internal combustion engine oils
  • JIS D 6011-2:2013 Fork lift trucks.Stability and verification of stability .Part 2: Counterbalanced trucks
  • JIS D 6011-3:2013 Fork lift trucks.Stability and verification of stability .Part 3: Reach and straddle trucks
  • JIS K 5402:1971 Ford cup for determining consistency of coatings
  • JIS K 2514:1996 Lubricating oils -- Determination of oxidation stability

British Standards Institution (BSI), Stability and Thermal Stability

  • BS EN ISO 10363:1995 Hot-melt adhesives - Determination of thermal stability
  • PD ISO/TS 4667:2022 Coal. Determination of the thermal stability and thermal fragmentation
  • BS EN 13631-2:2003 Explosives for civil uses - High explosives - Determination of thermal stability of explosives
  • BS EN 13631-2:2002(2003) Explosives for civil uses - High explosives - Determination of thermal stability of explosives
  • BS EN 13631-2:2002 Civil Explosives High Explosives Determination of Thermal Stability of Explosives
  • BS 4875 Pt.2:1985 Strength and stability of furniture. Methods for determination of stability of chairs and stools
  • BS 4875 Pt.4:1985 Strength and stability of furniture. Methods for determination of stability of settees
  • BS EN ISO 8497:1997 Thermal insulation - Determination of steady-state thermal transmission properties of thermal insulation for circular pipes
  • BS ISO 7176-1:1999 Wheelchairs - Determination of static stability
  • BS ISO 7176-1:2014 Wheelchairs. Determination of static stability
  • BS EN 1239:2011 Adhesives. Freeze-thaw stability
  • DD 248-1999 Determination of the hot storage stability of modified bitumen binders
  • BS EN ISO 16231-2:2015 Self-propelled agricultural machinery. Assessment of stability. Determination of static stability and test procedure
  • BS 4875-8:1998 Furniture - Strength and stability of furniture - Methods for determination of stability of non-domestic storage furniture
  • BS ISO 23999:2009 Resilient floor coverings. Determination of dimensional stability and curling after exposure to heat
  • BS 2782-1 Method 130A:1991 Methods of testing plastics. Thermal properties. Determination of the thermal stability of polyvinyl chloride by the Congo red method
  • BS EN 1022:2005 Domestic furniture - Seating - Determination of stability
  • BS ISO 13765-3:2006 Refractory mortars - Determination of joint stability
  • BS ISO 4305:2014+A1:2016 Mobile cranes. Determination of stability
  • BS EN 13763-2:2003 Explosives for civil uses - Detonators and relays - Determination of thermal stability
  • BS EN 13763-2:2002 Explosives for civil uses - Detonators and relays - Determination of thermal stability
  • BS EN 13763-2:2002(2003) Explosives for civil uses - Detonators and relays - Determination of thermal stability

Professional Standard - Petrochemical Industry, Stability and Thermal Stability

International Organization for Standardization (ISO), Stability and Thermal Stability

  • ISO 10363:1992 Hot-melt adhesives; determination of thermal stability
  • ISO/TS 4667:2022 Coal — Determination of the thermal stability and thermal fragmentation
  • ISO 11645:1993 | IULTCS Leather — Heat stability of industrial-glove leather
  • ISO 11645:1993 Leather; heat stability of industrial-glove leather
  • ISO 7172:1988 Furniture - Tables - Determination of Stability First Edition
  • ISO/CD 22207:1980 Kraft lignin - Determination of thermal stability by Thermogravimetry
  • ISO/DIS 22207:2023 Kraft lignin — Determination of thermal stability by Thermogravimetry
  • ISO 8130-8:1994 Coating powders - Part 8: Assessment of the storage stability of thermosetting powders
  • ISO 8130-8:2021 Coating powders - Part 8: Assessment of the storage stability of thermosetting powders
  • ISO 7171:1988 Furniture; storage units; determination of stability
  • ISO/TR 4616:1980 Plastics — Determination of the thermal stability of polyvinyl chloride (PVC) — Conductometric method
  • ISO 8301:1991 Thermal insulation; determination of steady-state thermal resistance and related properties; heat flow meter apparatus
  • ISO 8497:1994 Thermal insulation; determination of steady-state thermal transmission properties of thermal insulation for circular pipes
  • ISO 7491:2000 Dental materials - Determination of colour stability
  • ISO/TR 3485:1980 Plastics — Polypropylene granules — Determination of thermal stability in air by pH method
  • ISO/TR 7469:1977 Dimensional stability of hardboards

Canadian General Standards Board （CGSB), Stability and Thermal Stability

(U.S.) Ford Automotive Standards, Stability and Thermal Stability

Professional Standard - Coal, Stability and Thermal Stability

国家安全生产监督管理总局, Stability and Thermal Stability

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Stability and Thermal Stability

GM Daewoo, Stability and Thermal Stability

Association Francaise de Normalisation, Stability and Thermal Stability

  • NF T76-120*NF EN ISO 10363:1995 Hot-melt adhesives. Determination of thermal stability.
  • NF EN ISO 10363:1995 Adhésifs thermofusibles - Détermination de la stabilité thermique.
  • NF ISO 4305:2014 Grues mobiles - Détermination de la stabilité
  • NF EN ISO 16231-2:2015 Machines agricoles automotrices - Évaluation de la stabilité - Partie 2 : détermination de la stabilité statique et modes opératoires d'essai
  • NF T30-507:1981 Thermosetting powder paints. Evaluation of storage stability.
  • NF P85-515:1985 Sealants. Plastic type mastics for packing seals. Determination of resistance to heat.
  • NF P62-111:2012 Resilient floor coverings - Determination of dimensional stability and curling after exposure to heat.
  • NF P62-111:1994 Resilient floor coverings. Determination of dimensional stability and curling after exposure to heat.
  • NF D61-003*NF EN 1022:2018 Furniture - Seating - Determination of stability
  • NF EN 1239:2011 Adhésifs - Stabilité au gel-dégel
  • NF EN 12458:1999 Agents de surface - Détermination de la stabilité à l'eau dure.
  • NF ISO 6249:2021 Produits pétroliers - Détermination de la stabilité à l'oxydation thermique des carburéacteurs
  • NF T66-024:1984 BITUMEN EMULSIONS. TEST OF STABILITY WITH CEMENT.
  • NF P62-111*NF EN ISO 23999:2021 Resilient floor coverings - Determination of dimensional stability and curling after exposure to heat
  • NF EN ISO 23999:2021 Revêtements de sol résilients - Détermination de la stabilité dimensionnelle et de l'incurvation après exposition à la chaleur
  • NF ISO 4305/A1:2016 Grues mobiles - Détermination de la stabilité - Amendement 1
  • NF D61-003:2005 Domestic furniture - Seating - Determination of stability.

未注明发布机构, Stability and Thermal Stability

  • BS EN ISO 10363:1995(1999) Hot - melt adhesives — Determination of thermal stability
  • BS EN 434:1994(1999) Resilient floor coverings — Determination of dimensional stability and curling after exposure to heat
  • DIN EN 434:1994 Resilient floor coverings — Determination of dimensional stability and curling after exposure to heat
  • PD 6691:2022 Assessment and verification of constancy of performance

YU-JUS, Stability and Thermal Stability

ZA-SANS, Stability and Thermal Stability

国家市场监督管理总局、中国国家标准化管理委员会, Stability and Thermal Stability

  • GB/T 19136-2021 Testing method of the accelerated storage stability at elevated temperature for pesticides

GM Global, Stability and Thermal Stability

  • GMW 16948-2013 Polyamide 6 - Heat Stabilized, Impact Modified, UV Stabilized Issue 1; English

IN-BIS, Stability and Thermal Stability

Lithuanian Standards Office , Stability and Thermal Stability

  • LST EN ISO 10363:2000 Hot-melt adhesives - Determination of thermal stability (ISO 10363:1992)
  • LST EN 1239-2011 Adhesives - Freeze-thaw stability
  • LST EN ISO 8497:2000 Thermal insulation - Determination of steady-state thermal transmission properties of thermal insulation for circular pipes (ISO 8497:1994)
  • LST EN 13631-2-2003 Explosives for civil uses - High explosives - Part 2: Determination of thermal stability of explosives
  • LST ISO 7171:1996 Furniture. Storage units. Determination of stability
  • LST EN 12458-2002 Surface active agents - Determination of stability in hard water
  • LST ISO 1063:1997 Surface active agents. Determination of stability in hard water

AENOR, Stability and Thermal Stability

  • UNE-EN ISO 10363:1996 HOT-MELT ADHESIVES. DETERMINATION OF THERMAL STABILITY. (ISO 10363:1992).
  • UNE 53340-1:2004 Plastics. Acrylics sheets. Determination of thermal stability.
  • UNE 53246:1981 PLASTICS. DETERMINATION OF DIMENSION STABILITY OF THERMOPLASTIC MOULDED ARTICLES
  • UNE 55116:1975 FATS. DETERMINATION OF THE STABILITY. (METHOD OF ACTIVE OXYGEN).
  • UNE 26377:1987 BRAKE FLUIDS. HIGH TEMPERATURE STABILITY.
  • UNE-EN 1239:2011 Adhesives - Freeze-thaw stability
  • UNE-EN 13631-2:2003 Explosives for civil uses. High explosives. Part 2: Determination of thermal stability of explosives.
  • UNE-EN 12458:1999 SURFACE ACTIVE AGENTS. DETERMINATION OF STABILITY IN HARD WATER

RO-ASRO, Stability and Thermal Stability

RU-GOST R, Stability and Thermal Stability

  • GOST 26253-1984 Buildings and structures. Method for determining the building structure ability to maintain a relatively constant temperature of its inside surface under cycling thermal influence
  • GOST 7875-1983 Refractory products. Method for detemination of thermal stability
  • GOST 33403-2015 Testing of chemicals of environmental hazard. Screening test for thermal stability and stability in air
  • GOST 29104.14-1991 Industrial fabrics. Method for determination of heat resistance
  • GOST 938.28-1977 Leather. Method of determination of hygrothermic stability
  • GOST 7714-1975 Coals and anthracites. Method for the determination of thermal stability
  • GOST R 51154-1998 Beer and beer beverages. Methods for determination of carbon dioxide and stability
  • GOST 13917-1992 Optical materials. Methods for determination of chemical stability. Groups of chemical stability
  • GOST 7875.1-1994 Refractory products. Procedure for determination of thermal shook resistance on bricks
  • GOST 27711-1988 Dipping varnishes. Method for accelerated determination of thermal endurance
  • GOST 28097-1989 Varnished cloth. Methods for accelerated determination of thermal endurance
  • GOST 25645.321-1987 Polymeric materials radiation resistance. Terms and definitions
  • GOST 24445.6-1992 Phthalic anhydride for industrial use. Method for determination of colour stability
  • GOST 7875.2-1994 Refractory products. Procedure for determination of thermal shock resistance on samples
  • GOST 961-1989 Acid-resistant and thermostable acid-resistant ceramic tiles. Specifications
  • GOST R 50051-1992 Furniture. Chairs. Determination of stability
  • GOST 28447.0-1990 Pneumotextured threads. Methods for the determination of structure and tensile strength instability
  • GOST 28747-1990 Insulating flexible tubes. Accelerated test method for heating resistance
  • GOST 25579-1983 Modified wood. Method for determination of dimensions stability
  • GOST 10519-1976 Enamelled wires. Method of accelerated determination of thermal resistance
  • GOST 28793-1990 Furniture. Tables. Determination of stability
  • GOST 19295-1973 Lubricating greases. Method of mechanical stability determination
  • GOST R 51368-1999 Climatic environment stability test methods for machines, instruments and other industrial products. Test for stability influence of temperature
  • GOST 7875.0-1994 Refactory products. Basic requirements for procedures of thermal shock resistance determination
  • GOST 8979-1975 Artificial leather and films. Determination methods of resistance to heat and light stability
  • GOST 27712-1988 Laminated plastic sheets. Methods for accelerated determination of thermal endurance
  • GOST 28096-1989 Slot insulation materials. Method for accelerated determination of thermal endurance
  • GOST 981-1975 Mineral oils. Method for determination of oxidation stability
  • GOST 22567.3-1977 Synthetic detergents. Method for determination of stability
  • GOST 29188.3-1991 Cosmetics. Methods for determination of emulsion stability
  • GOST 18136-2017 Oils. Method for determination of oxidation stability
  • GOST 20989-1975 Rigid cellular plastics. Method for determining dimension stability
  • GOST 29264-1991 Surface active agents. Determination of stability in hard water
  • GOST R 52302-2004 Road vehicles. Handling and stability. Technical requirements. Test methods
  • GOST R 52954-2013 Petroleum products. Determination of thermal oxidation stability of gas turbine fuels

TR-TSE, Stability and Thermal Stability

  • TS 1836-1975 DBTE?RMINATION OP THERMAL STABILffiTY OF AVIATION T?RB?NE FUEL.S

European Committee for Standardization (CEN), Stability and Thermal Stability

  • EN ISO 10363:1995 Hot-Melt Adhesives - Determination of Thermal Stability (ISO 10363 : 1992)
  • EN ISO 23999:2021 Resilient floor coverings - Determination of dimensional stability and curling after exposure to heat (ISO 23999:2021)
  • EN ISO 23999:2018 Resilient floor coverings - Determination of dimensional stability and curling after exposure to heat
  • EN 434:1994 Resilient Floor Coverings - Determination of Dimensional Stability and Curling After Exposure to Heat
  • prEN 434-1990 Resilient floorcoverings; determination of dimensional stability and curling after exposure to heat
  • EN ISO 23999:2012 Resilient floor coverings - Determination of dimensional stability and curling after exposure to heat
  • EN 1239:2011 Adhesives - Freeze-thaw stability
  • EN ISO 8497:1996 Thermal Insulation - Determination of Steady-State Thermal Transmission Properties of Thermal Insulation for Circular Pipes ISO 8497: 1994
  • EN 1022:2005 Domestic Furniture - Seating - Determination of Stability
  • EN 1022:1996 Domestic Furniture - Seating - Determination of Stability Incorporates Corrigendum March 1997
  • EN 12458:1999 Surface active agents - Determination of stability in hard water

PT-IPQ, Stability and Thermal Stability

International Telecommunication Union (ITU), Stability and Thermal Stability

Professional Standard - Chemical Industry, Stability and Thermal Stability

US-FCR, Stability and Thermal Stability

Standard Association of Australia （SAA）, Stability and Thermal Stability

Professional Standard - Energy, Stability and Thermal Stability

  • NB/SH/T 0859-2013 Standard test method for the thermal stability of chemicals by thermal analysis
  • NB/SH/T 0906-2015 Determination of high temperature deposits of engine oils by hot tube test
  • NB/SH/T 0872-2013 Standard test method for determination of shear stability of lubricating grease in presence of water (water stability test)

German Institute for Standardization, Stability and Thermal Stability

  • DIN EN ISO 10363:1995-11 Hot-melt adhesives - Determination of thermal stability (ISO 10363:1992); German version EN ISO 10363:1995
  • DIN 51371:2008 Liquid fuels - Determination of thermal stability of fuel oil EL
  • DIN 51371:2008-08 Liquid fuels - Determination of thermal stability of fuel oil EL
  • DIN EN ISO 8497:1996 Thermal insulation - Determination of steady-state thermal transmission properties of thermal insulation for circular pipes (ISO 8497:1994); German version EN ISO 8497:1996
  • DIN EN 1022:2022-03 Furniture - Seating - Determination of stability; German and English version prEN 1022:2022 / Note: Date of issue 2022-02-18*Intended as replacement for DIN EN 1022 (2019-04).
  • DIN EN 1022:2019-04 Furniture - Seating - Determination of stability; German version EN 1022:2018 / Note: To be replaced by DIN EN 1022 (2022-03).
  • DIN EN ISO 23999:2012 Resilient floor coverings - Determination of dimensional stability and curling after exposure to heat (ISO 23999:2008); German version EN ISO 23999:2012
  • DIN 19901:2012-12 Installations for separation for light liquids and greases - Verification of structural stability and steadiness
  • DIN EN 1022:2017 Furniture - Seating - Determination of stability; German and English version prEN 1022:2017
  • DIN EN 1022:2019 Furniture - Seating - Determination of stability
  • DIN EN 1022:2022 Furniture - Seating - Determination of stability; German and English version prEN 1022:2022
  • DIN 4126:2013 Stability analysis of diaphragm walls
  • DIN 4126:2013-09 Stability analysis of diaphragm walls
  • DIN EN 1239:2011-07 Adhesives - Freeze-thaw stability; German version EN 1239:2011
  • DIN EN ISO 8497:1996-09 Thermal insulation - Determination of steady-state thermal transmission properties of thermal insulation for circular pipes (ISO 8497:1994); German version EN ISO 8497:1996
  • DIN 55415:2022-09 Transport stability - Test methods to determine the transport stability of unit loads in intermodal transportation
  • DIN 55415:2022 Transport stability - Test methods to determine the transport stability of unit loads in intermodal transportation
  • DIN EN 13631-2:2002-12 Explosives for civil uses - High explosives - Part 2: Determination of thermal stability of explosives; German version EN 13631-2:2002 / Note: To be replaced by DIN EN 13631-2 (2021-05).
  • DIN EN ISO 23999:2022-02 Resilient floor coverings - Determination of dimensional stability and curling after exposure to heat (ISO 23999:2021); German version EN ISO 23999:2021
  • DIN EN ISO 7491:2001 Dental materials - Determination of colour stability (ISO 7491:2000); German version EN ISO 7491:2000
  • DIN EN 1022:2005 Domestic furniture - Seating - Determination of stability; German version EN 1022:2005
  • DIN EN 12458:1999-04 Surface active agents - Determination of stability in hard water; German version EN 12458:1999
  • DIN EN 140401-804:2019-11 Detail Specification: Fixed low power film high stability SMD resistors - Rectangular - Stability classes 0,1; 0,25; German version EN 140401-804:2011 + A1:2013 + A2:2019 / Note: DIN EN 140401-804 (2014-09) remains valid alongside this standard until 2...

ES-AENOR, Stability and Thermal Stability

SE-SIS, Stability and Thermal Stability

FI-SFS, Stability and Thermal Stability

CU-NC, Stability and Thermal Stability

  • NC 33-88-1988 Oil Industry. Soluble Oil. Determination of Thermal Stability

GOSTR, Stability and Thermal Stability

  • GOST 7875.1-2018 Refractory products. Method for determination of thermal shock resistance on bricks
  • GOST 7875.2-2018 Refractory products. Method for determination of thermal shock resistance on samples
  • GOST 7875.0-2018 Refractory products. Basic requirements for methods of thermal shock resistance determination

Hebei Provincial Standard of the People's Republic of China, Stability and Thermal Stability

  • DB13/T 81.7-1991 Determination method of thermal stability of fireworks and firecrackers

Society of Automotive Engineers (SAE), Stability and Thermal Stability

Taiwan Provincial Standard of the People's Republic of China, Stability and Thermal Stability

  • CNS 12212-1988 Method of Test for Thermal Oxidation Stability of Gear Lubricants

National Metrological Technical Specifications of the People's Republic of China, Stability and Thermal Stability

Professional Standard - Electron, Stability and Thermal Stability

  • SJ/T 11037-1996 Test method for thermal stability of electronic glass
  • SJ/T 11497-2015 Test method for thermal stability testing of gallium arsenide wafers

工业和信息化部, Stability and Thermal Stability

American Society for Testing and Materials (ASTM), Stability and Thermal Stability

  • ASTM D4499-95(2000) Standard Test Method for Heat Stability of Hot-Melt Adhesives
  • ASTM D449-89(1999)e1 Standard Specification for Asphalt Used in Dampproofing and Waterproofing
  • ASTM D2070-91(1996) Standard Test Method for Thermal Stability of Hydraulic Oils
  • ASTM D2070-16 Standard Test Method for Thermal Stability of Hydraulic Oils
  • ASTM D2070-16e1 Standard Test Method for Thermal Stability of Hydraulic Oils
  • ASTM E2550-17 Standard Test Method for Thermal Stability by Thermogravimetry
  • ASTM UOP413-82 One Day Fuel Oil Stability
  • ASTM UOP835-82 Accelerated Fuel Oil Stability
  • ASTM E2550-07 Standard Test Method for Thermal Stability by Thermogravimetry
  • ASTM E2550-11 Standard Test Method for Thermal Stability by Thermogravimetry
  • ASTM E2114-04 Standard Terminology for Sustainability Relative to the Performance of Buildings
  • ASTM D6743-01 Standard Test Method for Thermal Stability of Organic Heat Transfer Fluids
  • ASTM D6743-01e1 Standard Test Method for Thermal Stability of Organic Heat Transfer Fluids
  • ASTM D6743-06(2011) Standard Test Method for Thermal Stability of Organic Heat Transfer Fluids
  • ASTM E2550-21 Standard Test Method for Thermal Stability by Thermogravimetry
  • ASTM F1212-89(2002) Standard Test Method for Thermal Stability Testing of Gallium Arsenide Wafers
  • ASTM F1212-89(1996)e1 Standard Test Method for Thermal Stability Testing of Gallium Arsenide Wafers
  • ASTM D2070-91(2001) Standard Test Method for Thermal Stability of Hydraulic Oils
  • ASTM D2070-91(2006) Standard Test Method for Thermal Stability of Hydraulic Oils
  • ASTM D2070-91(2010) Standard Test Method for Thermal Stability of Hydraulic Oils
  • ASTM F1721-96 Standard Practices for Determining Stability of Direct Thermal Imaging Products
  • ASTM D4499-07 Standard Test Method for Heat Stability of Hot-Melt Adhesives
  • ASTM D6743-11(2015) Standard Test Method for Thermal Stability of Organic Heat Transfer Fluids
  • ASTM D6743-20 Standard Test Method for Thermal Stability of Organic Heat Transfer Fluids
  • ASTM D5704-22a Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles
  • ASTM D5704-07 Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles
  • ASTM D5704-08 Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles
  • ASTM D5704-09 Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles

Professional Standard - Light Industry, Stability and Thermal Stability

  • QB/T 3567-1999 Method for determination of thermal stability of casserole for ceramic cooker
  • QB/T 4202-2011 Pigment for leather coating.Test method for the resistance to heat

Group Standards of the People's Republic of China, Stability and Thermal Stability

  • T/CI 102-2023 Determination of thermal stability of rare earth ceramic phosphors for laser-based lighting

ESDU - Engineering Sciences Data Unit, Stability and Thermal Stability

  • ESDU 74019 B-1981 THE STABILITY AND RESPONSE OF LINEAR SYSTEMS PART I: INTRODUCTORY CONCEPTS OF STABILITY
  • ESDU 74020 C-2007 The stability and response of linear systems. Part II: methods of displaying stability characteristics.
  • ESDU 74020 B-1981 THE STABILITY AND RESPONSE OF LINEAR SYSTEMS PART II: METHODS OF DISPLAYING STABILITY CHARACTERISTICS

WRC - Welding Research Council, Stability and Thermal Stability

  • BULLETIN 81-1962 TESTS ON THE STABILITY OF WELDED STEEL FRAMES TESTS ON THE STABILITY OF WELDED STEEL FRAMES

HU-MSZT, Stability and Thermal Stability

AT-ON, Stability and Thermal Stability

IT-UNI, Stability and Thermal Stability

Building Officials and Code Administrators International(U.S.), Stability and Thermal Stability

IPC - Association Connecting Electronics Industries, Stability and Thermal Stability

SAE - SAE International, Stability and Thermal Stability

ES-UNE, Stability and Thermal Stability

  • UNE-EN 1022:2019 Furniture - Seating - Determination of stability
  • UNE-EN ISO 23999:2022 Resilient floor coverings - Determination of dimensional stability and curling after exposure to heat (ISO 23999:2021)
  • UNE-EN 140401-804:2011/A2:2019 Detail Specification: Fixed low power film high stability SMD resistors - Rectangular - Stability classes 0,1; 0,25 (Endorsed by Asociación Española de Normalización in June of 2019.)
  • UNE-EN 140401-804:2011/AC:2012 Detail Specification: Fixed low power film high stability SMD resistors - Rectangular - Stability classes 0,1; 0,25 (Endorsed by Asociación Española de Normalización in January of 2017.)
  • UNE-EN 140401-804:2011 Detail Specification: Fixed low power film high stability SMD resistors - Rectangular - Stability classes 0,1; 0,25 (Endorsed by AENOR in September of 2011.)
  • UNE-EN 140401-804:2011/A1:2013 Detail Specification: Fixed low power film high stability SMD resistors - Rectangular - Stability classes 0,1; 0,25 (Endorsed by AENOR in January of 2014.)

国家质量监督检验检疫总局, Stability and Thermal Stability

  • SN/T 3078.2-2015 Determination of thermal stability of chemicals Part 2: Thermogravimetric analysis

American National Standards Institute （ANSI), Stability and Thermal Stability

国家能源局, Stability and Thermal Stability

  • SY/T 7646-2021 Technical requirements for salt cavity stability monitoring and evaluation
  • SY/T 7395-2017 Stability design of column-stabilized platform cylindrical shell structure

GB-REG, Stability and Thermal Stability

Professional Standard - Agriculture, Stability and Thermal Stability

  • NY/T 1860.4-2016 Guidelines on the determination of physico-chemical properties of pesticides.Part 4:Thermal stability
  • GB 1603-1979 Method for Determination of Stability of Pesticide Emulsion

BR-ABNT, Stability and Thermal Stability

CEN - European Committee for Standardization, Stability and Thermal Stability

ISA - International Society of Automation, Stability and Thermal Stability

VN-TCVN, Stability and Thermal Stability

  • TCVN 7615-2007 Determination of the thermal stability of polyethylene (PE) for use in gas pipes and fittings

BE-NBN, Stability and Thermal Stability

Professional Standard - Public Safety Standards, Stability and Thermal Stability

  • GA/T 76-1994 Test method for thermal analysis of the constant temperature stability of substances

Professional Standard - Medicine, Stability and Thermal Stability

National Aeronautics and Space Administration (NASA), Stability and Thermal Stability

Instrument Society of America (ISA), Stability and Thermal Stability

North Atlantic Treaty Organization Standards Agency, Stability and Thermal Stability

  thermal stability, liquid thermal stability, temperature thermal stability, thermal stability temperature, Dye Thermal Stability, Thermal stability meter, Material thermal stability, plastic thermal stability, How about thermal stability, Thermal Stability Analysis, heat stable plastic, Stability and Thermal Stability, Calculation of Thermal Stability, heat stable discoloration, Thermal Stability Oven, plastic thermal stability, plasticizer thermal stability, Thermal Stability Index, Thermal Stability+ Instrumentation, Thermal Stability Evaluation.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved