ZH
RU
ES

Methods for Testing Fuel Cell Performance

Methods for Testing Fuel Cell Performance, Total:500 items.

In the international standard classification, Methods for Testing Fuel Cell Performance involves: Fuel cells, Internal combustion engines for road vehicles, Electric road vehicles, Railway engineering in general, Road vehicles in general, Galvanic cells and batteries, Powder metallurgy, Commercial vehicles, Ceramics, Solar energy engineering, Space systems and operations, Electrical engineering in general, Compressors and pneumatic machines, Test conditions and procedures in general, Plastics, Protection against fire, Products of the chemical industry, Nuclear energy engineering, Railway rolling stock, Processes of the textile industry, Road vehicle systems, Construction materials, Domestic safety, Insulating materials, Insulating fluids, Kitchen equipment, Rubber and plastics products, Piezoelectric and dielectric devices, Shipbuilding and marine structures in general, Alarm and warning systems, Domestic, commercial and industrial heating appliances, Fuels, Electronic tubes, Paints and varnishes, Testing of metals, Miscellaneous domestic and commercial equipment, Road engineering, Internal combustion engines, Clothes, Motor cycles and mopeds, Protective equipment, Manufacturing processes in the rubber and plastics industries, Burners. Boilers, Footwear, Packaging and distribution of goods in general, Vocabularies, Components for electrical equipment, Cellular materials, Acoustics and acoustic measurements, Reinforced plastics, Refractories, Medical equipment, Electrical wires and cables, Continuous handling equipment.

British Standards Institution (BSI), Methods for Testing Fuel Cell Performance

PD IEC/TS 62282-7-1:2017 Fuel cell technologies. Test methods. Single cell performance tests for polymer electrolyte fuel cells (PEFC)
BS PD IEC/TS 62282-7-2:2014 Fuel cell technologies. Test methods. Single cell and stack performance tests for solid oxide fuel cells (SOFC)
BS EN IEC 62282-7-2:2021 Tracked Changes. Fuel cell technologies. Test methods. Single cell and stack performance tests for solid oxide fuel cells
BS PD IEC/TS 62282-7-1:2017 Fuel cell technologies. Test methods. Single cell performance tests for polymer electrolyte fuel cells (PEFC)
BS EN 62282-6-200:2012 Fuel cell technologies. Micro fuel cell power systems. Performance test methods
BS EN 62282-3-201:2017+A1:2022 Fuel cell technologies - Stationary fuel cell power systems. Performance test methods for small fuel cell power systems
BS EN 62282-3-200:2012 Fuel cell technologies. Stationary fuel cell power systems. Performance test methods
BS EN 62282-3-200:2016 Fuel cell technologies. Stationary fuel cell power systems. Performance test methods
BS EN 62282-3-2:2006 Fuel cell technologies - Stationary fuel cell power systems - Performance test methods
BS EN 62282-6-200:2017 Tracked Changes. Fuel cell technologies. Micro fuel cell power systems. Performance test methods
BS EN 62282-3-201:2013 Fuel cell technologies. Stationary fuel cell power systems. Performance test methods for small fuel cell power systems
20/30412786 DC BS EN 62282-7-2. Fuel cell technologies. Part 7-2. Test methods. Single cell and stack performance tests for solid oxide fuel cells (SOFC)
BS EN 62282-4-102:2017 Fuel cell technologies. Fuel cell power systems for industrial electric trucks. Performance test methods
BS EN IEC 62282-4-102:2023 Tracked Changes. Fuel cell technologies. Fuel cell power systems for electrically powered industrial trucks. Performance test methods
BS EN 62282-6-200:2008 Fuel cell technologies — Part 6-200: Micro fuel cell power systems — Performance test methods
23/30470502 DC BS EN IEC 62282-3-200. Fuel cell technologies - Part 3-200. Stationary fuel cell power systems. Performance test methods
23/30470506 DC BS EN IEC 62282-3-201. Fuel cell technologies - Part 3-201. Stationary fuel cell power systems. Performance test methods for small fuel cell power systems
20/30422600 DC BS EN 62282-3-201 AMD1. Fuel cell technologies. Part 3-201. Stationary fuel cell power systems. Performance test methods for small fuel cell power systems
19/30397959 DC BS EN 62282-3-201 AMD1. Fuel cell technologies. Part 3-201. Stationary fuel cell power systems. Performance test methods for small fuel cell power systems
BS EN IEC 62282-4-600:2022 Fuel cell technologies - Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Fuel cell/battery hybrid systems performance test methods for excavators
20/30419213 DC BS EN 62282-4-202. Fuel cell technologies. Part 4-202. Fuel Cell Power Systems for unmanned aircraft systems. Performance test methods
BS EN IEC 62282-8-201:2020 Fuel cell technologies. Energy storage systems using fuel cell modules in reverse mode. Test procedures for the performance of power-to-power systems
BS EN IEC 62282-8-101:2020 Fuel cell technologies. Energy storage systems using fuel cell modules in reverse mode. Test procedures for the performance of solid oxide single cells and stacks, including reversible operation
21/30440606 DC BS EN 62282-6-401. Fuel cell technologies. Part 6-401. Micro fuel cell power systems. Power and data interchangeability. Performance test methods for laptop computers
21/30434916 DC BS EN 62282-4-600. Fuel cell technologies. Part 4-600. Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Fuel cell/battery hybrid power pack systems performance test methods for excavators
21/30433542 DC BS EN 62282-8-301. Fuel cell technologies. Part 8-301. Energy storage systems using fuel cell modules in reverse mode. Power to methane energy systems based on solid oxide cells including reversible operation. Performance test methods
BS EN IEC 62282-8-102:2020 Fuel cell technologies - Energy storage systems using fuel cell modules in reverse mode. Test procedures for the performance of single cells and stacks with proton exchange membranes, including reversible operation
PD IEC TS 62282-9-101:2020 Fuel cell technologies. Evaluation methodology for the environmental performance of fuel cell power systems based on life cycle thinking. Streamlined life-cycle considered environmental performance characterization of stationary fuel cell combined heat...
20/30402570 DC BS IEC 62282-4-600. Fuel cell technologies. Part 4-600. Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Fuel cell and battery hybrid power pack systems performance test methods for excavators
22/30445185 DC BS EN 62282-8-201. Fuel cell technologies. Part 8-201. Energy storage systems using fuel cell modules in reverse mode. Test procedures for the performance of power-to-power systems
21/30440998 DC BS EN IEC 62282-4-102. Fuel cell technologies. Part 4-102. Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Fuel cell power systems for electrically powered industrial trucks. Performance test methods
23/30434816 DC BS EN IEC 63341-3. Railway applications. Rolling stock - Part 3. Fuel cell systems for propulsion. Performance test methods
18/30352664 DC BS IEC 62282-8-102. Fuel cell technologies. Part 8-102. Energy storage systems using fuel cell modules in reverse mode. Test procedures for proton exchange membrane single cell and stack performance including reversing operation
17/30352625 DC BS IEC 62282-8-101. Fuel cell technologies. Part 8-101. Energy storage systems using fuel cell modules in reverse mode. Test procedures for solid oxide single cell and stack performance including reversing operation
PD IEC/TR 61430:1997 Secondary cells and batteries. Test methods for checking the performance of devices designed for reducing explosion hazards. Lead-acid starter batteries
BS PD IEC TS 62282-9-102:2021 Fuel cell technologies. Evaluation methodology for the environmental performance of fuel cell power systems based on life cycle thinking. Product category rules for environmental product declarations of stationary fuel cell power systems and alternative s
BS EN IEC 62932-2-1:2020 Flow battery energy systems for stationary applications - Performance general requirements and test methods
BS 2782-1 Method 140D:1997 Methods of testing plastics. Thermal properties. Flammability of a test piece 550 mm x 35 mm of thin polyvinyl chloride sheeting (laboratory method)
BS 2782-1 Method 140E:1982 Methods of testing plastics. Thermal properties. Flammability of a small, inclined test piece exposed to an alcohol flame (laboratory method)
BS ISO 13774:1998 Rubber and plastics hoses for fuels for internal combustion engines. Method of test for flammability
DD CEN/TS 15406:2006 Solid recovered fuels — Methods for the determination of bridging properties of bulk material
BS 2782-1 Method 153A:1991 Methods of testing plastics. Thermal properties. Determination of stiffness in torsion of flexible materials (general method)
BS 2782 Pt.3 Meth.335A:1993 Test methods for plastics. Part 3: Mechanical properties. Test method 335A: Determination of bending properties
17/30332619 DC Flow Battery Systems for Stationary applications - Part 2-1 Performance general requirement & method of test
BS EN 50194:2000 Electrical apparatus for the detection of combustible gases in domestic premises. Test methods and performance requirements
BS 2782-10 Method 1003:1977 Methods of testing plastics. Glass reinforced plastics. Determination of tensile properties
21/30415001 DC BS IEC 63300. Test methods for electrical and magnetic properties of magnetic powder cores

International Electrotechnical Commission (IEC), Methods for Testing Fuel Cell Performance

IEC TS 62282-7-1:2017 Fuel cell technologies - Part 7-1: Test methods - Single cell performance tests for polymer electrolyte fuel cells (PEFC)
IEC 62282-3-200:2015 Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods
IEC 62282-6-200:2016 Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods
IEC 62282-3-201:2017 Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems
IEC 62282-6-200:2007 Fuel cell technologies - Part 6-2: Micro fuel cell power systems - Performance test methods
IEC 62282-6-200:2012 Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods
IEC 62282-3-200:2011 Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods
IEC TS 62282-7-2:2014 Fuel cell technologies - Part 7-2: Test methods - Single cell and stack performance test methods for solid oxide fuel cells (SOFC)
IEC 62282-7-2:2021 Fuel cell technologies - Part 7-2: Test methods - Single cell and stack performance tests for solid oxide fuel cells (SOFCs)
IEC 62282-3-201:2013 Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems
IEC 62282-3-2:2006 Fuel cell technologies - Part 3-2: Stationary fuel cell power plants - Performance test methods
IEC 62282-3-201:2017+AMD1:2022 CSV Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems
IEC 62282-4-102:2017 Fuel cell technologies - Part 4-102: Fuel cell power systems for industrial electric trucks - Performance test methods
IEC 62282-3-201:2017/AMD1:2022 Amendment 1 - Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems
IEC 105/443/DTS:2013 IEC/TS 62282-7-2: Fuel cell technologies - Part 7-2: Single cell/stack performance test methods for solid oxide fuel cells (SOFC)
IEC 105/429/CD:2012 IEC 62282-7-2: Fuel cell technologies - Part 7-2: Single cell/stack performance test methods for solid oxide fuel cells (SOFC)
IEC 105/241/DTS:2009 Fuel cell technologies - Part 7-1: Single cell test methods for polymer electrolyte fuel cell (PEFC)
IEC 62282-4-600:2022 Fuel cell technologies - Part 4-600: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Fuel cell/battery hybrid systems performance test methods for exc
IEC 62282-4-202:2023 Fuel cell technologies - Part 4-202: Fuel cell power systems for propulsion and auxiliary power units - Unmanned aircrafts - Performance test methods
IEC 105/362/CD:2011 IEC/TS 62282-7-2, Ed. 1: Fuel cell technologies - Part 7-2: Single cell/stack performance test methods for solid oxide fuel cells (SOFC)
IEC TS 62282-9-101:2020 Fuel cell technologies - Part 9-101: Evaluation methodology for the environmental performance of fuel cell power systems based on life cycle thinking - Streamlined life-cycle considered environmental
IEC 62282-8-102:2019 Fuel cell technologies - Part 8-102: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of single cells and stacks with proton exchange membrane, incl
IEC 62282-8-201:2020 Fuel cell technologies - Part 8-201: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of power-to-power systems
IEC 62282-8-101:2020 Fuel cell technologies - Part 8-101: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of solid oxide single cells and stacks, including reversible o
IEC TS 62282-9-102:2021 Fuel cell technologies - Part 9-102: Evaluation methodology for the environmental performance of fuel cell power systems based on life cycle thinking - Product category rules for environmental product
IEC TS 61430:1997 Secondary cells and batteries - Test methods for checking the performance of devices designed for reducing explosion hazards - Lead-acid starter batteries
IEC TR2 61430:1997 Secondary cells and batteries - Test methods for checking the performance of devices designed for reducing explosion hazards - Lead-acid starter batteries
IEC TR 61430:1997 Secondary cells and batteries - Test methods for checking the performance of devices designed for reducing explosion hazards - Lead-acid starter batteries

Association Francaise de Normalisation, Methods for Testing Fuel Cell Performance

NF EN 62282-6-200:2017 Technologies des piles à combustibles - Partie 6-200 : Systèmes à micro-piles à combustible - Méthodes d'essai des performances
NF EN 15502-2-1/IN1:2017 Technologies des piles à combustibles - Partie 6-200 : Systèmes à micro-piles à combustible - Méthodes d'essai des performances
NF C56-282-7-2*NF EN IEC 62282-7-2:2021 Fuel cell technologies - Part 7-2 : test methods - Single cell and stack performance tests for solid oxide fuel cells (SOFCs)
NF EN 62282-3-200:2016 Technologies des piles à combustible - Partie 3-200 : systèmes à piles à combustible stationnaires - Méthodes d'essai des performances
NF C56-282-6-200:2008 Fuel cell technologies - Part 6-200 : micro fuel cell power systems - Performance test methods.
NF C56-282-6-200:2012 Fuel cell technologies - Part 6-200 : micro fuel cell power systems - Performance test methods
NF C56-282-6-200*NF EN 62282-6-200:2017 Fuel cell technologies - Part 6-200 : micro fuel cell power systems - Performance test methods
NF C56-282-3-200*NF EN 62282-3-200:2016 Fuel cell technologies - Part 3-200 : stationary fuel cell power systems - Performance test methods
NF C56-282-3-201/A1*NF EN 62282-3-201/A1:2022 Fuel cell technologies - Part 3-201 : stationary fuel cell power systems - Performance test methods for small fuel cell power systems
NF C56-282-3-201*NF EN 62282-3-201:2017 Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems
NF C56-282-4-102*NF EN 62282-4-102:2017 Fuel cell technologies - Part 4-102 : fuel cell power systems for industrial electric trucks - Performance test methods
NF C56-282-3-200:2012 Fuel cell technologies - Part 3-200 : stationary fuel cell power systems -Performance test methods.
NF C56-282-3-201:2013 Fuel cell technologies - Part 3-201 : stationary fuel cell power systems - Performance test methods for small fuel cell power systems
NF EN IEC 62282-8-201:2020 Technologies des piles à combustible - Partie 8 201 : systèmes de stockage de l'énergie utilisant des modules à piles à combustible en mode inversé - Procédures d'essai pour la performance des systèmes électriques à électriques
NF EN ISO 9972:2015 Performance thermique des bâtiments - Détermination de la perméabilité à l'air des bâtiments - Méthode de pressurisation par ventilateur
NF C56-282-8-101*NF EN IEC 62282-8-101:2020 Fuel cell technologies - Part 8-101 : energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of solid oxide single cells and stacks, including reversible operation
NF C56-282-8-201*NF EN IEC 62282-8-201:2020 Fuel cell technologies - Part 8-201: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of power-to-power systems
NF C56-282-8-102*NF EN IEC 62282-8-102:2020 Fuel cell technologies - Part 8-102 : energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of single cells and stacks with proton exchange membranes, including reversible operation
NF EN IEC 63300:2023 Méthodes d\'essai des propriétés électriques et magnétiques des noyaux en poudre magnétique
NF G62-615*NF EN ISO 10765:2010 Footwear - Test method for the characterization of elastic materials - Tensile performance.
NF C58-432-2-1*NF EN IEC 62932-2-1:2020 Flow battery energy systems for stationary applications - Part 2-1 : performance general requirements and test methods

European Committee for Electrotechnical Standardization（CENELEC）, Methods for Testing Fuel Cell Performance

EN IEC 62282-7-2:2021 Fuel cell technologies - Part 7-2: Test methods - Single cell and stack performance tests for solid oxide fuel cells (SOFCs)
EN 62282-6-200:2012 Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods
EN 62282-6-200:2017 Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods
EN 62282-3-201:2013 Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems
EN 62282-3-201:2017 Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems
EN IEC 62282-4-102:2023 Fuel cell technologies - Part 4-102: Fuel cell power systems for electrically powered industrial trucks - Performance test methods
EN 62282-4-102:2017 Fuel cell technologies - Part 4-102: Fuel cell power systems for industrial electric trucks - Performance test methods
EN 62282-3-200:2016 Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods
EN IEC 62282-4-600:2022 Fuel cell technologies - Part 4-600: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Fuel cell/battery hybrid systems performance test methods for excavators
EN 62282-3-200:2012 Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods
EN IEC 62282-8-301:2023 Fuel cell technologies - Part 8-301: Energy storage systems using fuel cell modules in reverse mode - Power-to-methane energy systems based on solid oxide cells including reversible operation - Performance test methods
EN IEC 62282-8-101:2020 Fuel cell technologies - Part 8-101: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of solid oxide single cells and stacks, including reversible operation
EN IEC 62282-8-201:2020 Fuel cell technologies - Part 8-201: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of power-to-power systems
EN IEC 62282-8-102:2020 Fuel cell technologies - Part 8-102: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of single cells and stacks with proton exchange membranes, including reversible operation
EN IEC 62932-2-1:2020 Flow battery energy systems for stationary applications - Part 2-1: Performance general requirements and test methods

Danish Standards Foundation, Methods for Testing Fuel Cell Performance

DS/EN IEC 62282-7-2:2021 Fuel cell technologies – Part 7-2: Test methods – Single cell and stack performance tests for solid oxide fuel cells (SOFCs)
DS/EN 62282-6-200:2013 Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods
DS/EN 62282-3-200:2012 Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods
DS/EN 62282-3-201:2013 Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems
DS/IEC/TS 62282-7-1:2012 Fuel cell technologies - Part 7-1: Single cell test methods for polymer electrolyte fuel cell (PEFC)
DS/IEC TS 62282-9-101:2020 Fuel cell technologies – Part 9-101: Evaluation methodology for the environmental performance of fuel cell power systems based on life cycle thinking – Streamlined life-cycle considered environmental performance characterization of stationary fuel cell co
DS/EN 61427:2005 Secondary cells and batteries for photovoltaic energy systems (PVES) - General requirements and methods of test
DS/ISO 16110-2:2012 Hydrogen generators using fuel processing technologies - Part 2: Test methods for performance

Korean Agency for Technology and Standards (KATS), Methods for Testing Fuel Cell Performance

KS C IEC TS 62282-7-2:2016 Fuel cell technologies ― Part 7-2: Test methods ― Single cell and stack performance tests for solid oxide fuel cells(SOFC)
KS C IEC 62282-6-200:2009 Micro fuel cell power systems-Performance test methods
KS C IEC 62282-6-200:2014 Fuel cell technologies — Part 6-200: Micro fuel cell power systems — Performance test methods
KS C IEC 62282-3-200-2014(2019) Fuel cell technologies — Part 3-200: Stationary fuel cell power systems — Performance test methods
KS C IEC 62282-6-200-2014(2019) Fuel cell technologies — Part 6-200: Micro fuel cell power systems — Performance test methods
KS C IEC 62282-3-200:2014 Fuel cell technologies — Part 3-200: Stationary fuel cell power systems — Performance test methods
KS C IEC TS 62282-7-2-2016(2021) Fuel cell technologies ― Part 7-2: Test methods ― Single cell and stack performance tests for solid oxide fuel cells(SOFC)
KS C IEC 62282-3-201:2014 Fuel cell technologies — Part 3-201: Stationary fuel cell power sytems — Performance test methods for small fuel cell power systems
KS C IEC 62282-3-201-2014(2019) Fuel cell technologies — Part 3-201: Stationary fuel cell power sytems — Performance test methods for small fuel cell power systems
KS K 0813-2018 Test method for flammability of blankets
KS C 0291-2002 Environmental testing－Flammability of solid non－metallic materials when exposed to flame sources-list of test methods
KS C 6590-2007 Performance requirements for combustible gas detectors
KS C 6598-2007 Electrical apparatus for the detection of combustible gases in domestic premises－Test methods and performance requirements
KS C 8534-2002 On-site measurements of photovoltaic array I-V characteristics
KS M 2039-2006(2016) Motor fuels — Determination of knock characteristics —Research method
KS C IEC 61430:2003 Secondary cells and batteries－Test methods for checking the performance of devices designed for reducing explosion hazards－Lead-acid stater batteries
KS K 0140-2008(2015) Testing method for the dusting behavior of dyes
KS C 8530-2005 Environmental and endurance test methods forcrystalline solar cell modules
KS M 2228-2009(2019) Testing method for water separation characteristic of aviation turbine fuels
KS C IEC TS 61430:2018 Secondary cells and batteries — Test methods for checking the performance of devices designed for reducing explosion hazards — Lead-acid starter batteries
KS R 6100-4-2022 Swappable common-use battery pack for electric motorcycles — Part 4: Test methods for performance, safety and reliability of battery pack
KS B 6003-2013(2018) Testing method for performance of fuel injection pump of diesel engine
KS M 3032-2002 TESTING METHOD FOR FLAMMABILITY OF POLYMERIC MATERIALS USING THE OXYGEN INDEX METHOD
KS F 2835-2015 Reaction to fire tests for building products exposed to the thermal attack by a single burning item
KS F 2835-2009 Reaction to fire tests for building products exposed to the thermal attack by a single burning item
KS L 5503-1992(1997) TESTING METHOD FOR REFRACTORINESS OF FIRECLAY PLASTIC REFRACTORIES
KS L 5503-1986 TESTING METHOD FOR REFRACTORINESS OF FIRECLAY PLASTIC REFRACTORIES
KS M 2045-2007(2022) Testing method for octane number of motor fuel by motor method

ES-UNE, Methods for Testing Fuel Cell Performance

UNE-EN IEC 62282-7-2:2021 Fuel cell technologies - Part 7-2: Test methods - Single cell and stack performance tests for solid oxide fuel cells (SOFCs) (Endorsed by Asociación Española de Normalización in September of 2021.)
UNE-EN 62282-6-200:2017 Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods (Endorsed by Asociación Española de Normalización in March of 2017.)
UNE-EN 62282-3-200:2016 Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods (Endorsed by AENOR in April of 2016.)
UNE-EN 62282-3-201:2017/A1:2022 Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems (Endorsed by Asociación Española de Normalización in April of 2022.)
UNE-EN 62282-3-201:2017 Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems (Endorsed by Asociación Española de Normalización in December of 2017.)
UNE-EN IEC 62282-4-102:2023 Fuel cell technologies - Part 4-102: Fuel cell power systems for electrically powered industrial trucks - Performance test methods (Endorsed by Asociación Española de Normalización in March of 2023.)
UNE-EN 62282-4-102:2017 Fuel cell technologies - Part 4-102: Fuel cell power systems for industrial electric trucks - Performance test methods (Endorsed by Asociación Española de Normalización in August of 2017.)
UNE-EN IEC 62282-8-201:2020 Fuel cell technologies - Part 8-201: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of power-to-power systems (Endorsed by Asociación Española de Normalización in April of 2020.)
UNE-EN IEC 62282-8-102:2020 Fuel cell technologies - Part 8-102: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of single cells and stacks with proton exchange membranes, including reversible operation (Endorsed by Asociación...
UNE-EN IEC 62282-8-301:2023 Fuel cell technologies - Part 8-301: Energy storage systems using fuel cell modules in reverse mode - Power-to-methane energy systems based on solid oxide cells including reversible operation - Performance test methods (Endorsed by Asociación Español...
UNE-EN IEC 62282-8-101:2020 Fuel cell technologies - Part 8-101: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of solid oxide single cells and stacks, including reversible operation (Endorsed by Asociación Española de Norma...
UNE-EN IEC 62932-2-1:2020 Flow battery energy systems for stationary applications - Part 2-1: Performance general requirements and test methods (Endorsed by Asociación Española de Normalización in June of 2020.)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Methods for Testing Fuel Cell Performance

GB/T 24554-2009 Performance test methods for fuel cell engines
GB/T 24554-2022 Performance test methods for fuel cell system
GB/T 28817-2012 Single cell test methods for polymer electrolyte fuel cell (PEFC)
GB/T 23751.2-2009 Micro fuel cell power systems.Part 2:Performance test methods
GB/T 27748.2-2013 Stationary fuel cell power systems.Part 2:Performance test methods
GB/T 43092-2023 High-temperature performance test method for electrochemical performance testing of lithium-ion battery cathode materials
GB/T 28183-2011 Test methods of fuel cell power system for bus
GB/T 23645-2009 Test methods of fuel cell power system for passenger cars
GB/T 42847.3-2023 Reversible mode fuel cell modules for energy storage systems Part 3: Electrical energy storage system performance test methods
GB/Z 27753-2011 Test method for adaptability to operating conditions of membrane electrode assembly used in PEM fuel cells
GB/T 6494-1986 Measurement procedures for electrical characteristics of astronautic solar cells
GB 6495-1986 Measurement procedures for electrical characteristics of terrestrial solar cells
GB/Z 21743-2008 Stationary proton exchange membrane fuel cell power system(separate).Tests methods for the performance
GB/T 20042.7-2014 Proton exchange membrane fuel cells.Part 7: Test method of carbon paper properties
GB/T 31035-2014 Test methods for proton exchange membrane fuel cell stack at subzero environment
GB 11012-1989 Inspection procedures for electrical performance test equipments for solar cells
GB/T 42847.2-2023 Reversible mode fuel cell modules for energy storage systems Part 2: Performance test methods for reversible mode proton exchange membrane cells and stacks
GB/T 20042.6-2011 Proton exchange membrane fuel cell.Part 6: Test method of bipolar plate properties
GB/T 9343-1988 Test method for flammability of plastics--Flash-ignition temperature and self-ignition temperature test
GB/T 20042.5-2009 Proton exchange membrane fuel cell.Part 5:Test method for membrane electrode assembly
GB/T 15750-2008 Test methods for the properties of piezoelectric ceramics.Test for the ageing properties
GB/T 3389-2008 Testing of Performance Parameters of Piezoelectric Ceramic Material Performance Test Method
GB/T 3389.7-1986 Test methods for the properties of piezoelectric ceramics--Test for dielectric properties in high electric field
GB/T 9343-2008 Test method for flammability of plastics.Determination of flash-ignition temperature and self-ignition temperature
GB/T 4610-1984 Test for flammability of plastics--Ignition temperature test
GB/T 20042.4-2009 Proton exchange membrane fuel cell.Part 4:Test method for electrocatalysts
GB/T 31886.1-2015 Test method about the influence of gaseous contaminants in reaction gas on the performance of proton exchange membrane fuel cells.Part 1:Gaseous contaminants in air
GB/T 31886.2-2015 Test method about the influence of gaseous contaminants in reaction gas on the performance of proton exchange membrane fuel cells.Part 2:Gaseous contaminants in hydrogen
GB/T 16304-2008 Test methods of the properties for piezoelectric ceramics.Test for relation between electric field and strain
GB/T 11020-1989 Test methods for the determination of the flammability of solid electrical insulating materials when exposed to an igniting source
GB/T 20042.3-2009 Proton exchange membrane fuel cell.Part 3:Test method for proton exchange membrane
GB/T 3389.8-1986 Test methods for the properties of piezoelectric ceramics--Test for the pyroelectric coefficient
GB/T 11320-1989 Test methods for the properties of piezoelectric ceramics material with the low mechanical quality factor
GB 11320-1989 Piezoelectric Ceramic Material Properties Test Method for Low Mechanical Quality Factor Piezoelectric Ceramic Material Properties
GB/T 11311-1989 Test methods for the properties of piezoelectric ceramics test for poisson's Ratio σ**E
GB 5594.1-1985 Performance test methods for structural ceramic materials of electronic components Test methods for air tightness
GB/T 5594.1-1985 Test methods for properties of structure ceramic used in electronic components--Test method for gas-tightness
GB/T 3789.17-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of electrical intensity
GB/T 3789.22-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of vibration stability
GB/T 11387-2008 Test methods for the properties of piezoelectric ceramics.Test for the static flexural strength
GB/T 3789.19-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of frequency characteristic curve
GB/T 5594.6-1985 Test methods for properties of structure ceramic used in electronic components--Test method for chemical durability
GB/T 3389.3-2001 Test methods for the properties of piezoelectric ceramics test for Curie temperature Tc
GB/T 3789.3-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of cathode emission current
GB/T 3789.4-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of reverse grids current
GB 5594.5-1985 Test methods for performance of structural ceramic materials for electronic components Test methods for volume resistivity
GB/T 5594.5-1985 Test methods for properties of structure ceramic used in electronic components--Test method for volume resistivity
GB/T 11310-1989 Test methods for the properties of piezoelectric ceramics--Test methods for temperature characteristics of relative free dielectric constants
GB 11310-1989 Piezoelectric Ceramic Material Performance Test Method Relative Free Permittivity Temperature Characteristics Test
GB/T 3789.12-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of interelectrode insulation
GB/T 3789.15-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of output power
GB/T 3789.26-1991 Measurements of the electrical properties of transmitting tubes--Methods of measuring the power gain
GB/T 3789.28-1991 Measurements of the electrical properties of transmitting tubes--Method of measuring the cross modulation
GB/T 5594.7-1985 Test methods for properties of structure ceramic used in electronic components--Test method for liquid permeability
GB/T 23467-2009 Standard test method for evaluation of flame resistant clothing protection against flash fire simulations using an instrumented mainikin
GB/T 3789.21-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of static characteristic reference point
GB/T 3789.29-1991 Measurements of the electrical properties of transmitting tubes--Method of measuring the non-linearity in the luminance of the lower frequency
GB/T 3789.23-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of grid No3 control ability
GB/T 3789.5-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of grid thermo-emission current
GB/T 3789.13-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of static characteristic curve for common grid circuit
GB/T 3789.14-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of static characteristic curve for common cathode circuit
GB/T 3789.7-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of anode ion current
GB/T 3789.2-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of current of anode and grid
GB/T 3789.11-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of grid No3 cut-off voltage
GB/T 3789.10-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of grid No1 cut-off voltage
GB/T 3389.2-1999 Test methods for the properties of piezoelectric ceramics. Static test for piezoelectric strain constant d33
GB/T 3785-1983 Electric,sonic properties and measuring methods for sound level meters
GB/T 3789.6-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of transconductance and amplification factor
GB/T 3789.16-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of pulse output power
GB/T 3789.27-1991 Measurements of the electrical properties of transmitting tubes--Methods of measuring the inter modulation distortion of a three tone signal
GB/T 3789.31-1991 Measurements of the electrical properties of transmitting tubes--Methods of measuring the press of synchronizing pulse
GB/T 3789.25-1991 Measurements of the electrical properties of transmitting tubes--Methods of measuring the vision output power
GB/T 3789.20-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of grid No1 current cut-off voltage

Group Standards of the People's Republic of China, Methods for Testing Fuel Cell Performance

T/CI 090-2023 Performance test methods of ejector for fuel cell system
T/SDAS 187-2020 Fule cell rolling stock-Performance test methods of fuel cell stack
T/CSAE 149-2020 Electromagnetic compatibility test methods for fuel cell engine
T/CSAE 183-2021 General performance test methods for fuel cell stacks and fuel cell systems
T/CSAE 122-2019 Test methods for cold startperformancesof fuel cell electric vehicles under sub-zero temperature
T/CASME 674-2023 Specification for performance test of voltage monitors for fuel cell systems
T/SCSAE 002-2022 Bench test method for dual power source system of fuel cell hybrid electric bus
T/CEEIA 502-2021 Direct methanol fuel cell - Performance test method under specific environmental conditions
T/CAAMTB 12-2020 Proton exchange membrane fuel cell membrane electrode test method
T/CSAE 187-2021 Performance test methods for centrifugal air compressor of hydrogen fuel cell engine
T/SPSTS 026-2023 Electrical and safety performance requirements and test methods of Li-air battery
T/ZZAS 001-2018 Test method for electrical performance of high power lithium-ion battery
T/SCSAE 001-2022 Energy consumption bench test method for powertrain of fuel cell hybrid electric bus
T/CASME 520-2023 Test method for proton exchange membrane fuel cell coating metal bipolar plate
T/CSAE 236-2021 Proton exchange membrane fuel cell engine—Test methods for bench reliability
T/CES 176-2022 Evaluation method for lifetime of stationary proton exchange membrane fuel cell stack
T/GDCKCJH 026-2020 Performance index and test methods for polymer quasi-solid-state electrolyte power battery
T/GDCKCJH 056-2022 Technical performance and test method of high temperature ternary polymer lithium-ion power battery for special vehicle
T/GDCKCJH 054-2022 Technical performance and test method of low temperature rechargeable lithium ion battery for outdoor energy storage
T/CSEE 0073-2018 Thermogravimetric test and evaluation method of combustion performance of power coal
T/GDCKCJH 057-2022 Technical performance and test method of polymer lithium-ion energy storage battery with wide temperature range for field operation

European Committee for Standardization (CEN), Methods for Testing Fuel Cell Performance

CENELEC EN 62282-6-200-2008 Fuel cell technologies — Part 6-200: Micro fuel cell power systems — Performance test methods

CENELEC - European Committee for Electrotechnical Standardization, Methods for Testing Fuel Cell Performance

EN 62282-6-200:2008 Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods
EN 62282-3-2:2006 Fuel cell technologies Part 3-2: Stationary fuel cell power systems - Performance test methods
EN 61056-1:1993 Portable Lead-Acid Cells and Batteries (Valve- Regulated Types) Part 1: General Requirements@ Functional Characteristics - Methods of Test

AENOR, Methods for Testing Fuel Cell Performance

UNE-EN 62282-6-200:2013 Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods
UNE-EN 62282-3-200:2012 Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods
UNE-EN 62282-3-201:2013 Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems
UNE 51118:1983 STANDARD TEST METHOD FOR OXIDATION STABILITY OF AVIATION FUELS (POTENTIAL RESIDUE METHOD)

German Institute for Standardization, Methods for Testing Fuel Cell Performance

DIN IEC/TS 62282-7-1:2017 Fuel cell technologies - Part 7-1: Test methods - Single cell performance tests for polymer electrolyte fuel cells (PEFC) (IEC/TS 62282-7-1:2017)
DIN IEC/TS 62282-7-2:2015 Fuel cell technologies - Part 7-2: Test methods - Single cell and stack performance tests for solid oxide fuel cells (SOFC) (IEC/TS 62282-7-2:2014)
DIN EN 62282-6-200:2008 Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods (IEC 62282-6-200:2007); German version EN 62282-6-200:2008
DIN IEC/TS 62282-7-2:2011 Fuel cell technologies - Part 7-2: Single cell/stack-performance test methods for solid oxide fuel cells (SOFC) (IEC 105/322/NP:2011)
DIN EN 62282-3-201:2014 Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems (IEC 62282-3-201:2013); German version EN 62282-3-201:2013
DIN EN 62282-3-200:2012 Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods (IEC 62282-3-200:2011); German version EN 62282-3-200:2012
DIN EN 62282-6-200:2013 Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods (IEC 62282-6-200:2012); German version EN 62282-6-200:2012
DIN IEC/TS 62282-7-1:2012 Fuel cell technologies - Part 7-1: Single cell test methods for polymer electrolyte fuel cell (PEFC) (IEC/TS 62282-7-1:2010)
DIN EN IEC 62282-8-102:2021 Fuel cell technologies - Part 8-102: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of single cells and stacks with proton exchange membranes, including reversible operation (IEC 62282-8-102:2019); Ger
DIN EN IEC 62282-8-201:2020 Fuel cell technologies - Part 8-201: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of power-to-power systems (IEC 62282-8-201:2020); German version EN IEC 62282-8-201:2020
DIN 51627-4:2009 Automotive fuels - Test methods - Part 4: Determination of electrical conductivity in ethanol fuel

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Methods for Testing Fuel Cell Performance

GB/T 34582-2017 Single cell and stack performance test methods for solid oxide fuel cells (SOFC)
GB/T 27748.4-2017 Stationary fuel cell power systems Part 4: Performance test methods for small fuel cell power systems
GB/T 23751.2-2017 Micro fuel cell power systems－Part 2: Performance test methods
GB/T 33983.2-2017 Direct methanol fuel cell system—Part 2：Performance test method
GB/T 34593-2017 Test methods of hydrogen emission for fuel cell engine
GB/T 33979-2017 Test methods for proton exchange membrane fuel cell power system at subzero environment
GB/T 6494-2017 Measurement method for electrical characteristics of aerospace solar cells

Lithuanian Standards Office , Methods for Testing Fuel Cell Performance

LST EN IEC 62282-7-2:2021 Fuel cell technologies - Part 7-2: Test methods - Single cell and stack performance tests for solid oxide fuel cells (SOFCs) (IEC 62282-7-2:2021)
LST EN 62282-6-200-2008 Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods (IEC 62282-6-200:2007)
LST EN 62282-6-200-2013 Fuel cell technologies -- Part 6-200: Micro fuel cell power systems - Performance test methods (IEC 62282-6-200:2012)
LST EN 62282-3-200-2012 Fuel cell technologies -- Part 3-200: Stationary fuel cell power systems - Performance test methods (IEC 62282-3-200:2011)

Standard Association of Australia （SAA）, Methods for Testing Fuel Cell Performance

IEC 62282-4-102:2022 RLV Fuel cell technologies — Part 4-102: Fuel cell power systems for electrically powered industrial trucks — Performance test methods
IEC 62282-4-102:2022 Fuel cell technologies — Part 4-102: Fuel cell power systems for electrically powered industrial trucks — Performance test methods
AS 1180.12:1974 Methods of test for hose made from elastomeric materials - Resistance to ignition
AS 4594.1:1999 Internal combustion engines - Performance - Standard reference conditions, declarations of power, fuel and lubricating oil consumption and test methods
AS/NZS 4695.2.13:1996 Fire hazard testing of electrotechnical products Part 2.13:Test methods - Glow-wire ignitability test on materials
AS 1530.1:1994 Methods for fire tests on building materials, components and structures - Combustibility test for materials
AS 1530.2:1993 Methods for fire tests on building materials, components and structures - Test for flammability of materials
AS 1530.1:1994(R2016) Methods for fire tests on building materials, components and structures - Combustibility test for materials
AS ISO 16110.2:2020 Hydrogen generators using fuel processing technologies, Part 2: Test methods for performance
AS/NZS 4695.2.12:1996 Fire hazard testing of electrotechnical products Part 2.12:Test methods - Glow-wire Flammability test on materials
AS 1334.9:1982 Methods of testing conveyor and elevator belting - Determination of electrical resistance of conveyor belting

Japanese Industrial Standards Committee (JISC), Methods for Testing Fuel Cell Performance

JIS C 8842:2013 Single cell and stack-performance test methods for solid oxide fuel cell (SOFC)
JIS C 62282-4-102:2021 Fuel cell technologies -- Part 4-102: Fuel cell power systems for electrically powered industrial trucks -- Performance test methods
JIS C 8841-3:2011 Small solid oxide fuel cell power systems -- Part 3: Performance testing methods and environment testing methods
JIS R 1761:2016 Testing method for gas permeability of porous ceramics using solid oxide fuel cell
JIS C 8832:2008 Performance test for stationary polymer electrolyte fuel cell stack
JIS C 8823:2008 Testing methods for small polymer electrolyte fuel cell power systems
JIS C 8802:2003 Accelerated life test methods for phosphoric acid fuel cell
JIS C 8824:2008 Testing methods for environment of small polymer electrolyte fuel cell power systems
JIS C 8851:2013 Measurement methods for 11 mode energy efficiency of small fuel cell power systems and for annual energy consumption of standard residence
JIS B 8013:1977 Methods of performance test for small size land internal combustion engines
JIS K 7105:1981 Testing methods for optical properties of plastics
JIS C 8917:1989 Environmental and endurance test methods for crystalline solar cell modules
JIS C 8826:2008 Testing methods of power conditioner for grid interconnected small polymer electrolyte fuel cell power systems
JIS C 8826:2011 Testing methods of power conditioner for grid interconnected small fuel cell power systems
JIS A 1322:1966 Testing method for incombustibility of thin materials for buildings
JIS C 8841-2:2011 Small solid oxide fuel cell power systems -- Part 2: General safety codes and safety testing methods
JIS C 8938 AMD 1:2005 Environmental and endurance test methods for amorphous solar cell modules (Amendment 1)
JIS K 4830 AMD 1:2007 Performance testing methods for flexible intermediate bulk containers of ammonium nitrate fuel oil explosives(Amendment 1)
JIS K 7220:1995 Testing method for compressive properties of rigid cellular plastics
JIS T 0309:2009 Test method for fatigue properties of metallic biomaterials

RU-GOST R, Methods for Testing Fuel Cell Performance

GOST IEC 62282-3-201-2015 Fuel cell technologies. Part 3-201. Stationary fuel cell power systems. Performance test methods for small fuel cell power systems
GOST R IEC 62282-3-200-2014 Fuel cell technologies. Part 3-200. Stationary fuel cell power systems. Performance test method
GOST IEC/TS 62282-7-1-2016 Fuel cell technologies. Part 7-1. Single cell test methods for polymer electrolyte fuel cell
GOST R IEC 61430-2004 Secondary cells and batteries. Test methods for checking the performance of devices designed for reducing explosion hazards. Lead-acid starter batteries
GOST R 50695-1994 Methods of test for the determination of the flammability of solid electrical insulating materials when exposed to an igniting source
GOST 30262-1995 Test procedures for determining physical properties of brush materials for electrical machines

KR-KS, Methods for Testing Fuel Cell Performance

KS C IEC TS 62282-7-2-2016 Fuel cell technologies ― Part 7-2: Test methods ― Single cell and stack performance tests for solid oxide fuel cells(SOFC)
KS C IEC 62282-4-102-2023 Fuel cell technologies — Part 4-102: Fuel cell power systems for industrial electric trucks — Performance test methods
KS C IEC 62282-8-102-2023 Fuel cell technologies — Part 8-102: Energy storage systems using fuel cell modules in reverse mode — Test procedures for the performance of single cells and stacks with proton exchange membranes, inc
KS C IEC TS 61430-2018(2023) Secondary cells and batteries — Test methods for checking the performance of devices designed for reducing explosion hazards — Lead-acid starter batteries
KS C IEC TS 61430-2018 Secondary cells and batteries — Test methods for checking the performance of devices designed for reducing explosion hazards — Lead-acid starter batteries

Society of Automotive Engineers (SAE), Methods for Testing Fuel Cell Performance

SAE J2615-2011 Testing Performance of Fuel Cell Systems for Automotive Applications
SAE J2616-2011 Testing Performance of the Fuel Processor Subsystem of an Automotive Fuel Cell System
SAE J2617-2007 Recommended Practice for Testing Performance of PEM Fuel Cell Stack Sub-system for Automotive Applications
SAE J2617-2011 Recommended Practice for Testing Performance of PEM Fuel Cell Stack Sub-system for Automotive Applications
SAE J2265-1995 Diesel Engines Diesel Fuel Performance Requirement and Test method for Assessing Fuel Lubricity
SAE J369-1970 FLAMMABILITY OF AUTOMOTIVE INTERIOR TRIM MATERIALS—HORIZONTAL TEST METHOD
SAE J2665-2006 Test Procedure to Measure the Fuel Permeability of Materials by the Cup Weight Loss Method
SAE J369-2003 Flammability of Polymeric Interior Materials Horizontal Test Method
SAE J369-1994 FLAMMABILITY OF POLYMERIC INTERIOR MATERIALS—HORIZONTAL TEST METHOD

SAE - SAE International, Methods for Testing Fuel Cell Performance

SAE J2616-2005 Testing Performance of the Fuel Processor Subsystem of an Automotive Fuel Cell System
SAE J2265-2015 Diesel Engines - Diesel Fuel – PerformanceRequirement and Test Method for Assessing Fuel Lubricity
SAE J2665-2018 Test Procedure to Measure the Fuel Permeability of Materials by the Cup Weight Loss Method

Professional Standard - Energy, Methods for Testing Fuel Cell Performance

NB/T10820-2021
NB/T10821-2021
NB/T 10670-2021 Solid Oxide Fuel Cell Electrolyte Membranes Test Methods Part 1: Self-supporting Membranes
NB/T10670-2021

国家能源局, Methods for Testing Fuel Cell Performance

NB/T 10820-2021 Solid oxide fuel cell single cell test method
NB/T 10821-2021 Solid oxide fuel cell stack test method
NB/T 42081-2016 All-vanadium redox flow battery single cell performance test method

国家市场监督管理总局、中国国家标准化管理委员会, Methods for Testing Fuel Cell Performance

GB/T 28817-2022 Single cell test methods for polymer electrolyte fuel cell (PEFC)
GB/T 27748.2-2022 Stationary fuel cell power system—Part 2: Performance test methods
GB/T 41134.2-2021 Fuel cell power systems for industrial electric trucks—Part 2: Performance test methods
GB/T 37154-2018 Fuel cell electric vehicles—Test methods of hydrogen emission
GB/T 20042.3-2022 Proton exchange membrane fuel cell—Part 3: Test method for proton exchange membrane
GB/T 38914-2020 Evaluation method for lifetime of proton exchange membrane fuel cell stack in vehicle application
GB/T 41347-2022 Test method for flex durability of flexible packaging material

AT-OVE/ON, Methods for Testing Fuel Cell Performance

OVE EN 62282-3-201/A1-2021 Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems (IEC 105/839/CDV) (Amendment) (english version)
OVE EN IEC 62282-4-600:2021 Fuel cell technologies - Part 4-600: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Fuel cell/battery hybrid systems performance test methods for excavators (IEC 105/864/CDV) (english version)
OVE EN IEC 62282-8-102:2021 Fuel cell technologies - Part 8-102: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of single cells and stacks with proton exchange membranes, including reversible operation ((IEC 62282-8-102:2019) EN

Professional Standard - Aerospace, Methods for Testing Fuel Cell Performance

QJ 1019-1986 电源
QJ 1019A-1995 Solar cell electrical performance test method

Guangdong Provincial Standard of the People's Republic of China, Methods for Testing Fuel Cell Performance

DB44/T 1485-2014 Test method for energy consumption of fuel cell electric vehicles

工业和信息化部, Methods for Testing Fuel Cell Performance

SJ/T 11793-2022 Test method for electrochemical properties of lithium-ion battery electrode materials
SJ/T 10171-2016 General test method for basic properties of alkaline battery separators
SJ/T 11792-2022 Test method for conductivity of lithium-ion battery electrode materials
SJ/T 11795-2022 Test method for magnetic foreign matter content in lithium-ion battery electrode materials
SJ/T 11794-2022 Test method for free lithium in lithium-ion battery cathode materials
SJ/T 11632-2016 Testing method for microcrack defects in silicon wafers for solar cells
JC/T 2499-2018 Test method for electromagnetic wave absorption performance of building materials

IEC - International Electrotechnical Commission, Methods for Testing Fuel Cell Performance

TS 62282-7-1-2010 Fuel cell technologies – Part 7-1: Single cell test methods for polymer electrolyte fuel cell (PEFC) (Edition 1.0)

IX-IX-IEC, Methods for Testing Fuel Cell Performance

IEC 62282-8-301:2023 Fuel cell technologies - Part 8-301: Energy storage systems using fuel cell modules in reverse mode - Power-to-methane energy systems based on solid oxide cells including reversible operation - Performance test methods

未注明发布机构, Methods for Testing Fuel Cell Performance

BS EN IEC 62282-8-301:2023 Fuel cell technologies Part 8 - 301 : Energy storage systems using fuel cell modules in reverse mode — Power - to - methane energy systems based on solid oxide cells including reversible operation — Performance test methods
DIN EN 60952-1:2005 Aircraft batteries – Part 1: General test methods and performance characteristics
DIN EN 932-5:2000 Test methods for general properties of aggregates

Professional Standard - Electron, Methods for Testing Fuel Cell Performance

SJ/T 2196-1982 Test method for electrical characteristics of terrestrial silicon solar cells
SJ/T 11061-1996 Inspection method of solar cell electrical performance testing equipment
SJ/T 2429-1983 Test method for electrical characteristics of astronautic monocrystal silicon solar cells
SJ 2857.2-1988 Methods for measurement of thermoelectric refrigeration materials properties--Methods for measurements of conductivity
SJ 2857.1-1988 Methods for measurement of thermoelectric refrigeration materials properties--Methods for measurement of thermal conductivity
SJ 2857.3-1988 Methods for measurement of thermoelectric refrigeration materials properties--Methods for measurement of thermoelectric electromotance
SJ 3234-1989 Test method for dynamic relating to vacuum gas emission properties of electronic material
SJ/T 10865-1996 Methods of measurement for electrical properties of disk-seal tubes - Methods of measurement for the frequency response characteristics
SJ/T 10869-1996 Methods of measurement for electrical properties of disk-seal tubes - Methods of measurement for the power gain
SJ/T 10866-1996 Methods of measurement for electrical properties of disk-seal tubes - Methods of measurement for the frequency position
SJ/T 10868-1996 Methods of measurement for electrical properties of disk-seal tubes - Methods of measurement for the self-neutralization frequency
SJ/T 10871-1996 Methods of measurement for electrical properties of disk-seal tubes - Methods of measurement for the three tone inter-modulation distortion

BE-NBN, Methods for Testing Fuel Cell Performance

NBN D 19-001-1981

American Society for Testing and Materials (ASTM), Methods for Testing Fuel Cell Performance

ASTM E948-95 Standard Test Method for Electrical Performance of Photovoltaic Cells Using Reference Cells Under Simulated Sunlight
ASTM E948-95(2001) Standard Test Method for Electrical Performance of Photovoltaic Cells Using Reference Cells Under Simulated Sunlight
ASTM E1321-97a(2002) Standard Test Method for Determining Material Ignition and Flame Spread Properties
ASTM E1321-97a(2002)e1 Standard Test Method for Determining Material Ignition and Flame Spread Properties
ASTM E1321-08 Standard Test Method for Determining Material Ignition and Flame Spread Properties
ASTM D1929-96 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM D1929-96(2001)e1 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM D1929-10 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM E869-93(2006) Standard Test Method for Performance Evaluation of Fuel Ethanol Manufacturing Facilities
ASTM E1321-09 Standard Test Method for Determining Material Ignition and Flame Spread Properties
ASTM E948-15 Standard Test Method for Electrical Performance of Photovoltaic Cells Using Reference Cells Under Simulated Sunlight
ASTM E948-05a Standard Test Method for Electrical Performance of Photovoltaic Cells Using Reference Cells Under Simulated Sunlight
ASTM F1695-20 Standard Test Method for Performance of Underfired Broilers
ASTM E1321-13 Standard Test Method for Determining Material Ignition and Flame Spread Properties
ASTM D873-99a Standard Test Method for Oxidation Stability of Aviation Fuels (Potential Residue Method)
ASTM E162-94 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
ASTM E162-90e1 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
ASTM E162-98 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
ASTM E162-02 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
ASTM E162-16 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
ASTM D873-12(2018) Standard Test Method for Oxidation Stability of Aviation Fuels (Potential Residue Method)
ASTM D873-02(2007) Standard Test Method for Oxidation Stability of Aviation Fuels (Potential Residue Method)
ASTM D3675-09a Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source
ASTM G124-18 Standard Test Method for Determining the Combustion Behavior of Metallic Materials in Oxygen-Enriched Atmospheres
ASTM E953/E953M-08 Standard Test Method for Fusibility of Refuse-Derived Fuel (RDF) Ash
ASTM D2792-69(2004) Standard Test Method for Solvent and Fuel Resistance of Traffic Paint
ASTM E948-05 Standard Test Method for Electrical Performance of Photovoltaic Cells Using Reference Cells Under Simulated Sunlight
ASTM E948-16(2020) Standard Test Method for Electrical Performance of Photovoltaic Cells Using Reference Cells Under Simulated Sunlight
ASTM E948-16 Standard Test Method for Electrical Performance of Photovoltaic Cells Using Reference Cells Under Simulated Sunlight
ASTM E948-09 Standard Test Method for Electrical Performance of Photovoltaic Cells Using Reference Cells Under Simulated Sunlight
ASTM E2236-10(2015) Standard Test Methods for Measurement of Electrical Performance and Spectral Response of Nonconcentrator Multijunction Photovoltaic Cells and Modules
ASTM D3675-21 Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source
ASTM D3675-19 Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source
ASTM D3675-21a Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source
ASTM D3675-17 Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source
ASTM D1692-68 Standard Method Of Test For Flammability Of Plastic Sheeting And Cellular Plastics
ASTM E162-15 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
ASTM E162-15b Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
ASTM F1958/F1958M-99(2010) Standard Test Method for Determining the Ignitability of Non-flame-Resistant Materials for Clothing by Electric Arc Exposure Method Using Mannequins
ASTM E869-93(1998) Standard Test Method for Performance Evaluation of Fuel Ethanol Manufacturing Facilities
ASTM D3874-10 Standard Test Method for Ignition of Materials by Hot Wire Sources
ASTM D6423-19 Standard Test Method for Determination of pHe of Denatured Fuel Ethanol and Ethanol Fuel Blends
ASTM D6423-20 Standard Test Method for Determination of pHe of Denatured Fuel Ethanol and Ethanol Fuel Blends
ASTM D6423-20a Standard Test Method for Determination of pHe of Denatured Fuel Ethanol and Ethanol Fuel Blends
ASTM D6423-18 Standard Test Method for Determination of pHe of Denatured Fuel Ethanol and Ethanol Fuel Blends
ASTM D7261-06a Standard Test Method for Determining Water Separation Characteristics of Diesel Fuels by Portable Separometer
ASTM D7261-06 Standard Test Method for Determining Water Separation Characteristics of Diesel Fuels by Portable Separometer
ASTM D7261-07 Standard Test Method for Determining Water Separation Characteristics of Diesel Fuels by Portable Separometer
ASTM D7261-08 Standard Test Method for Determining Water Separation Characteristics of Diesel Fuels by Portable Separometer
ASTM D2624-06 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
ASTM D2624-06a Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
ASTM D2624-02 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
ASTM D2624-21a Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
ASTM D2624-21 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
ASTM E1036-15 Standard Test Methods for Electrical Performance of Nonconcentrator Terrestrial Photovoltaic Modules and Arrays Using Reference Cells
ASTM E1036-08 Standard Test Methods for Electrical Performance of Nonconcentrator Terrestrial Photovoltaic Modules and Arrays Using Reference Cells
ASTM D6423-14 Standard Test Method for Determination of pHe of Denatured Fuel Ethanol and Ethanol Fuel Blends
ASTM F1959/F1959M-05 Standard Test Method for Determining the Arc Thermal Performance Value of Materials for Clothing
ASTM F1959/F1959M-04 Standard Test Method for Determining the Arc Thermal Performance Value of Materials for Clothing
ASTM D6423-99(2004) Standard Test Method for Determination of pHe of Ethanol, Denatured Fuel Ethanol, and Fuel Ethanol (Ed75-Ed85)
ASTM E162-09 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
ASTM E162-11 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
ASTM E1036-02(2007) Standard Test Methods for Electrical Performance of Nonconcentrator Terrestrial Photovoltaic Modules and Arrays Using Reference Cells
ASTM E1036-02 Standard Test Methods for Electrical Performance of Nonconcentrator Terrestrial Photovoltaic Modules and Arrays Using Reference Cells
ASTM E1036-12 Standard Test Methods for Electrical Performance of Nonconcentrator Terrestrial Photovoltaic Modules and Arrays Using Reference Cells
ASTM D2700-03 Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
ASTM D2700-03a Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
ASTM D2700-03b Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
ASTM D495-99(2004) Standard Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation
ASTM D495-99 Standard Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation
ASTM E2236-05a Standard Test Methods for Measurement of Electrical Performance and Spectral Response of Nonconcentrator Multijunction Photovoltaic Cells and Modules
ASTM E2236-05 Standard Test Methods for Measurement of Electrical Performance and Spectral Response of Nonconcentrator Multijunction Photovoltaic Cells and Modules
ASTM E2236-10 Standard Test Methods for Measurement of Electrical Performance and Spectral Response of Nonconcentrator Multijunction Photovoltaic Cells and Modules
ASTM D6423-08 Standard Test Method for Determination of pHe of Ethanol, Denatured Fuel Ethanol, and Fuel Ethanol (Ed75-Ed85)
ASTM D2624-09 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
ASTM D2624-00 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
ASTM E2236-10(2019) Standard Test Methods for Measurement of Electrical Performance and Spectral Response of Nonconcentrator Multijunction Photovoltaic Cells and Modules
ASTM F1959/F1959M-12 Standard Test Method for Determining the Arc Rating of Materials for Clothing
ASTM E2236-02 Standard Test Methods for Measurement of Electrical Performance and Spectral Response of Nonconcentrator Multijunction Photovoltaic Cells and Modules
ASTM D4804-19 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics
ASTM D4804-19a Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics

ZA-SANS, Methods for Testing Fuel Cell Performance

SANS 61430:1997 Secondary cells and batteries - Test methods for checking the performance of devices designed for reducing explosion hazards - Lead-acid starter batteries

American Society of Mechanical Engineers (ASME), Methods for Testing Fuel Cell Performance

ASME PTC 32.2 Report-1978 Methods of measuring the performance of nuclear reactor fuel in light water reactors

GOSTR, Methods for Testing Fuel Cell Performance

GOST R IEC 62984-3-2020 High-temperature secondary batteries. Part 3. Sodium-based batteries. Performance requirements and test methods
GOST R IEC 63115-1-2020 Secondary cells and batteries containing alkaline or other non-acid electrolytes. Secondary sealed nickel-metal hydride cells and batteries for use in industrial applications. Part 1. Labeling and designation requirements. Performance test methods
GOST ISO 16110-2-2016 Hydrogen generators using fuel processing technologies. Part 2. Test methods for performance

PL-PKN, Methods for Testing Fuel Cell Performance

PN-EN IEC 62282-8-101-2020-11 E Fuel cell technologies - Part 8-101: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of solid oxide single cells and stacks, including reversible operation (IEC 62282-8-101:2020)
PN E04160-16-1989 Electric cab?es Methods of testing Test of the stripping properties of insuiation

RO-ASRO, Methods for Testing Fuel Cell Performance

STAS E 12267-1984 SOLID ELECTRICAL INSULATING MATERIALS Methods of test for the delt rminalion of the flammability in Llic case of exposure In an igniting source
STAS 7137-1988 PL.ASTICS Determination of rigid plastics flamability by incandoseent rod method
STAS 10336-1975 ELECTRIC COFFEE MAKERS Methods for performance measuring

Shandong Provincial Standard of the People's Republic of China, Methods for Testing Fuel Cell Performance

DB37/T 4097-2020 Durability evaluation method for proton exchange membrane fuel cell stacks for commercial vehicles

American National Standards Institute （ANSI), Methods for Testing Fuel Cell Performance

ANSI/ASTM D3874:2013 Test Method for Ignition of Materials by Hot Wire Sources
ANSI/ASTM D2624:2021 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
ANSI/NFPA 289-2009 Standard Method of Fire Test for Determining the Fire Performance Characteristics of Individual Fuel Packages
ANSI/UL 2360-2004 Test Methods for Determining the Combustibility Characteristics of Plastics Used in Semi-Conductor Tool Construction
ANSI/ASTM E162:2021 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
ANSI/ASTM E1321:2013 Test Method for Determining Material Ignition and Flame Spread Properties
ANSI/SAE J369-1994 Flammability of Polymeric Interior Materials - Horizontal Test Method
ANSI/ASTM D6824:2013 Test Method For Determining Filterability of Aviation Turbine Fuel
ANSI/ASTM D3675:2001 Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source

FI-SFS, Methods for Testing Fuel Cell Performance

SFS 5235-1986

Canadian General Standards Board （CGSB), Methods for Testing Fuel Cell Performance

CGSB 4.2 NO 27.4-2010-CAN/CGSB-2010 M閠hodes pour 閜reuves textiles Textiles ?Comportement au feu ?D閠ermination de la facilit?d抋llumage d掗prouvettes orient閑s verticalement
CGSB 1-GP-71 METH 118.5-1979 Methodes D'Essai Des Peintures Et Pigments Resistance A La Combustion Feuils Cuits

CN-DB 4, Methods for Testing Fuel Cell Performance

DB4206/T 61-2023

Professional Standard-Ships, Methods for Testing Fuel Cell Performance

CB/T 3794-2014 Test methods for the properties of piezoelectric ceramics.Test for electrode joint strength

AT-ON, Methods for Testing Fuel Cell Performance

ONORM S 1450-1979 Testing of textiles; determination of the burning behaviour — vertical method

Canadian Standards Association (CSA), Methods for Testing Fuel Cell Performance

CSA C381.2-08-2008 Test method for determining the energy efficiency of battery-charging systems First Edition
CAN/CSA-C381.2-2014 Test method for determining the energy performance of battery-charging systems (Second Edition; Includes Errata: May 2015)

Professional Standard - Railway, Methods for Testing Fuel Cell Performance

TB/T 2639.2-1995 Test method of electric burner for fire resistance test of materials used in railway vehicles

CEN - European Committee for Standardization, Methods for Testing Fuel Cell Performance

PD CEN/TS 15406:2006 Solid recovered fuels - Methods for the determination of bridging properties of bulk material

Professional Standard - Chemical Industry, Methods for Testing Fuel Cell Performance

HG/T 4560-2013 Test method for anti-condensation of coating

Malaysia Standards, Methods for Testing Fuel Cell Performance

MS 911-1984

Indonesia Standards, Methods for Testing Fuel Cell Performance

SNI 09-4405-1997 Test method for driving perfomance of motor cycle

IN-BIS, Methods for Testing Fuel Cell Performance

IS 13360 Pt.6/Sec.6-1994

Professional Standard - Aviation, Methods for Testing Fuel Cell Performance

HB 7068.1-1994 Test method for combustion performance of polyurethane foam absorbing materials used in radio frequency non-reflection chamber Conductivity combustion test

SE-SIS, Methods for Testing Fuel Cell Performance

SIS SS 404 09 89-1992 Methods of test for the determination of the ignitability of solid electrical insulating materials when exposed to electrically heated wire sources

Professional Standard - Coal, Methods for Testing Fuel Cell Performance

MT/T 386-2011 Test methods and compliance of flame resistant performance for mining cables