ZH
RU
ES

General Tablet Hardness

General Tablet Hardness, Total:115 items.

In the international standard classification, General Tablet Hardness involves: Aerospace electric equipment and systems, Plastics, Coatings and related processes used in aerospace industry, Lubricants, industrial oils and related products, Paper and board, Materials for aerospace construction, Paint ingredients, Hydraulic fluids, Ceramics, Products of the chemical industry, Construction materials, Hand-held tools, Road engineering, Iron and steel products, Surface treatment and coating, Electrical accessories.

CU-NC, General Tablet Hardness

NC 21-02-1967 Aproximate concentration reagent solutions for general use
NC 21-03-1968 Exact concentration reagent solutions for general use

United States Navy, General Tablet Hardness

NAVY MIL-P-24705 A-1992 PENETRATORS, MULTIPLE CABLE, FOR ELECTRIC CABLES, GENERAL SPECIFICATION FOR
NAVY QPL-AS29600-QPD-2011 Connectors, Electrical, Circular, Miniature, Composite, High Density, Quick Coupling, Environment Resistant, Removable Crimp Contacts Associated Hardware, General Specification for
NAVY QPL-29600-2-1994 CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, COMPOSITE, HIGH DENSITY, QUICK COUPLING, ENVIRONMENT RESISTANT, REMOVABLE CRIMP CONTACTS, ASSOCIATED HARDWARE, GENERAL SPECIFICATION FOR

RO-ASRO, General Tablet Hardness

STAS 6541-1990 Turning tools with sintered carbide tips. General technical requirements for quality
STAS 8967-1971 SHELL TYPE MILLING CUTTERS WITH CARBIDE TIPPED BLADES AND ADJUSTABLE TOOLS General requirements
STAS 9907-1975 RUBBER GASKETS FOR REFRIGERANT COMPRESSORS General technical requirements for quality
STAS SR ISO 2380-2:1994 SCREWDRIVERS FOR SLOTTED-HEAD SCREWS Part 2: General requirements, lengts of blades and marking of hand operated screwdrivers
STAS 11337/1-1989 POLYESTER RESINS REINFORCED WITH GLASS FIBRES General specifications for strength determination at chemical agents action

Korean Agency for Technology and Standards (KATS), General Tablet Hardness

KS M 3820-2022 General rules for testing methods of epoxide resins and hardeners
KS M ISO 5628:2012 Paper and board-Determination of bending stiffness-General principles for two-point, three-point and four-point methods
KS M ISO 787-4:2022 General methods of test for pigments and extenders — Part 4: Determination of acidity or alkalinity of the aqueous extract
KS M ISO 787-10:2022 General methods of test for pigments and extenders — Part 10: Determination of density — Pyknometer method
KS M ISO 787-23:2022 General methods of test for pigments and extenders — Part 23: Determination of density(using a centrifuge to remove entrained air)
KS M ISO 787-11:2022 General methods of test for pigments and extenders — Part 11: Determination of tamped volume and apparent density after tamping
KS B ISO 2380-2-2012(2017) Assembly tools for screws and nuts－Screwdrivers for slotted-head screws－Part 2：General requirements, lengths of blades and marking of hand-operated screwdrivers
KS M ISO 787-24:2022 General methods of test for pigments and extenders — Part 24: Determination of relative tinting strength of coloured pigments and relative scattering power of white pigments — Photometric methods
KS B ISO 2380-2-2012(2022) Assembly tools for screws and nuts－Screwdrivers for slotted-head screws－Part 2：General requirements, lengths of blades and marking of hand-operated screwdrivers

Society of Automotive Engineers (SAE), General Tablet Hardness

SAE AMS2431/1E-2010 Peening Media (ASR) Cast Steel Shot, Regular Hardness (45 to 52 HRC)
SAE AMS3358B-1995 Silicone Potting Compound, Elastomeric Two-Part, General Purpose 80 to 180 Poise (8 to 18 Pa-s) Viscosity
SAE AMS3361B-1995 Silicone Potting Compound, Elastomeric Two-Part, General Purpose 150 to 400 Poise (15 to 40 Pa-s) Viscosity
SAE AMS3359B-1995 Silicone Potting Compound, Elastomeric Two-Part, General Purpose 200 to 400 Poises (20 to 40 Pa-s) Viscosity
SAE AMS3361C-2012 Silicone Potting Compound, Elastomeric, Two-Part, General Purpose, 140 to 400 Poise (15 to 40 Pa˙s) Viscosity
SAE AMS3358C-2012 Silicone Potting Compound, Elastomeric, Two-Part General Purpose, 80 to 180 Poise (8 to 18 Pa˙s) Viscosity

SE-SIS, General Tablet Hardness

SIS SS 2673-1988 Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — General data
SIS SS 2666-1988 Indexable hardmetal (carbide) inserts with rounded corners, with partly cylindrical fixing hole - General data
SIS SS 2672-1988 Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole — General data

(U.S.) Ford Automotive Standards, General Tablet Hardness

FORD ESE-M8G142-A1-1979 GASKET, MEDIUM CORK/ CHLOROSULFONATED POLYETHYLENE SPONGE BINDER
FORD ESE-M8G127-A2-2000 GASKET, CORK/CHLOROSULFONATED POLYETHYLENE BINDER - MEDIUM [Replaced: FORD ESE-M8G127-A]
FORD WSE-M2D472-A-2009 SILICONE (VMQ) RUBBER, MEDIUM DUROMETER, LOW VOLATILES, LONG LIFE GASKET ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M4G348-A-2007 SEALER, EXPANDING, PUMPABLE, ANTI-FLUTTER, 35 - 55 A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSE-M2D399-A3-2009 SILICONE RUBBER (VMQ), MEDIUM HARDNESS, HIGH TEMPERATURE, LOW VOLATILE SILICONE, GASKET ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSD-M2D393-A2-2009 SILICONE (VMQ) RUBBER, HIGH TEMPERATURE RESISTANT, HIGH ELONGATION, 45 HARDNESS (IRHD), LONG-LIFE GASKET ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2D489-A3-2009 SILICONE (VMQ) RUBBER, IMPROVED COMPRESSION SET, 60 DUROMETER, HIGH ELONGATION, LONG LIFE GASKET ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2D487-A1-2004 SILICONE (VMQ) RUBBER, IMPROVED COMPRESSION SET, 40 DUROMETER, LOW VOLATILES, LONG LIFE GASKET ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2D488-A1-2009 SILICONE (VMQ) RUBBER, IMPROVED COMPRESSION SET, 50 DUROMETER, LOW VOLATILES, LONG LIFE GASKET ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2D488-A2-2009 SILICONE (VMQ) RUBBER, IMPROVED COMPRESSION SET, 50 DUROMETER, LOW VOLATILES, LONG LIFE GASKET ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2D489-A1-2009 SILICONE (VMQ) RUBBER, IMPROVED COMPRESSION SET, 60 DUROMETER, LOW VOLATILES, LONG LIFE GASKET ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2D489-A2-2009 SILICONE (VMQ) RUBBER, IMPROVED COMPRESSION SET, 60 DUROMETER, LOW VOLATILES, LONG LIFE GASKET ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2D490-A1-2009 SILICONE (VMQ) RUBBER, IMPROVED COMPRESSION SET, 70 DUROMETER, LOW VOLATILES, LONG LIFE GASKET ***TO BE USED WITH FORD WSS-M99P1111-A***

German Institute for Standardization, General Tablet Hardness

DIN 51350-1:2010 Testing of lubricants - Testing in the four-ball tester - Part 1: General working principles
DIN 51350-1:2015 Testing of lubricants - Testing in the four-ball tester - Part 1: General working principles
DIN 51389-1:1982 Determination of lubricants; mechanical testing of hydraulic fluids in the vane-cell-pump; general working principles
DIN 52007-1:2006 Bitumen and bituminous binders - Determination of viscosity - Part 1: General principles and evaluation
DIN 52007-1:2013 Bitumen and bituminous binders - Determination of viscosity - Part 1: General principles and evaluation
DIN EN ISO 787-4:2018 General methods of test for pigments and extenders - Part 4: Determination of acidity or alkalinity of the aqueous extract (ISO 787-4:1981)
DIN EN 13286-1:2022-01 Unbound and hydraulically bound mixtures - Part 1: Test methods for laboratory reference density and water content - Introduction, general requirements and sampling; German version EN 13286-1:2021

Military Standard of the People's Republic of China-General Armament Department, General Tablet Hardness

GJB 312.7-1987 Aircraft Maintenance Quality Specification General Requirements for Aircraft Core Hardness Maintenance

PL-PKN, General Tablet Hardness

PN C99040-05-1987 |Photographic black-and-white developers Qua]itative and usable characteristic of positiv develoDers in powder for genera? use OPG-03 (121-03)
PN C99040-06-1987 Photographig_ black-and-white developers Qualitative and usable characteristic of negative dcvelopers in powder for genera? use ONG-04 (Hl-04)
PN C99040-07-1987 Photographic black-and white dcvelopers Qualitative and usable characteristic of positive developers in powdcr for genera? use OPG-05 (121-05)
PN C99040-11-1990 Photographic black-and-white developers Qualitative and usable characteristic of negatives deve!opers in liquid for geneial use ONL-09 (112-09)
PN J80010-1973 Photometric dosimeters of X and gamma radiation General re?uirements and methods of testing
PN M01002-01-1992 Basic quantities in cutting and grinding. Geometry of the active part of cutting tools. General terms, reference systems, tool and working angles, chip breakers

U.S. Military Regulations and Norms, General Tablet Hardness

ARMY QPL-55365-81 NOTICE 1-2008 Capacitor, Fixed, Electrolytic (Tantalum), Chip, Established Reliability and Nonestablished Reliability, General Specification for

British Standards Institution (BSI), General Tablet Hardness

BS EN ISO 787-10:1993 General methods of test for pigments and extenders - Determination of density - Pyknometer method
BS 6829-1.2:1988 Analysis of surface active agents (raw materials). General methods. Method for determination of free alkalinity or free acidity
BS 6829-1.6:1991 Analysis of surface active agents (raw materials). General methods. Method for determination of solubility in water
BS EN ISO 787-11:1982 General methods of test for pigments and extenders - Determination of tamped volume and apparent density after tamping
BS 6829 Sec.1.3:1988 Analysis of surface active agents (raw materials). General methods. Method for determination of alkalinity
BS EN 623-3:2001 Advanced technical ceramics - Monolithic ceramics - General and textural properties - Determination of grain size and size distribution (characterized by the linear intercept method)
BS 6829 Sec.1.2:1988 Analysis of surface active agents (raw materials). General methods. Method for determination of free alkalinity or free acidity
BS EN ISO 787-23:1980 General methods of test for pigments and extenders - Determination of density (using a centrifuge to remove entrained air)
BS EN 10137-1:1996 Plates and Wide Flats Made of High Yield Strength Structural Steels in the Quenched and Tempered or Precipitation Hardened Conditions - Part 1: General Delivery Conditions
BS EN 13286-1:2021 Tracked Changes. Unbound and hydraulically bound mixtures. Test methods for laboratory reference density and water content. Introduction, general requirements and sampling
20/30410971 DC BS EN 13286-1. Unbound and hydraulically bound mixtures. Part 1. Test methods for laboratory reference density and water content. Introduction, general requirements and sampling
BS EN ISO 787-24:1988 General methods of test for pigments and extenders - Determination of relative tinting strength of coloured pigments and relative scattering power of white pigments - Photometric methods

European Committee for Standardization (CEN), General Tablet Hardness

prEN 623-2-1992 Advanced technical ceramics; monolithic ceramics; general and textural properties; part 2: determination of density and porosity
EN ISO 4608:1998 Plastics - Homopolymer and Copolymer Resins of Vinyl Chloride for General Use - Determination of Plasticizer Absorption at Room Temperature ISO 4608:1998
EN 10137-1:1995 Plates and Wide Flats Made of High Yield Strength Structural Steels in the Quenched and Tempered or Precipitation Hardened Conditions - Part 1: General Delivery Conditions

BE-NBN, General Tablet Hardness

NBN EN 623-2-1993 Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 2: Determination of density and porosity
NBN T 21-306-1984 General methods of test for pigments and extenders - Dermination of relative tinting strength of coloured pigments and relative scattering power of white pigments - Photometric method

Association Francaise de Normalisation, General Tablet Hardness

NF B41-203:1993 Advanced technical ceramics. Monolithic ceramics. General and textural properties. Part 2 : determination of density and porosity.
NF DTU 26.2 P1-2:2008 Travaux de bâtiment - Chapes et dalles à base de liants hydrauliques - Partie 1-2 : critères généraux de choix des matériaux
NF DTU 26.2 P1-2/A1:2015 Travaux de bâtiment - Chapes et dalles à base de liants hydrauliques - Partie 1-2 : critères généraux de choix des matériaux
NF P14-201-1-2/A1*NF DTU 26.2 P1-2/A1:2015 Building works - Screeds and slabs with a base of hydraulic binders - Part 1-2 : general criteria for selection of materials
NF EN 13286-1:2021 Mélanges traités et mélanges non traités aux liants hydrauliques - Méthode d'essai de détermination en laboratoire de la masse volumique de référence et de la teneur en eau - Partie 1 : introduction, exigences générales et échantillonnage
NF B41-205*NF EN 623-4:2005 Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 4 : guidance on the determination of surface roughness
NF E74-356:1993 Screwdrivers for cross-recessed head screws. Part 2 : general requirements, lengths of blades and marking of hand-operated screwdrivers.
NF A36-204-1:1995 Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions. Part 1 : general delivery conditions.
NF ISO 8764-2:2005 Outils de manoeuvre pour vis et écrous - Tournevis pour vis à empreinte cruciforme - Partie 2 : spécifications générales, longueurs des lames et marquage des tournevis à main
NF ISO 2380-2:2005 Outils de manoeuvre pour vis et écrous - Tournevis pour vis à tête fendue - Partie 2 : spécifications générales, longueurs des lames et marquage des tournevis à main
NF B41-204:2002 Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 3 : determination of grain size and size distribution (characterized by the linear intercept method).

KR-KS, General Tablet Hardness

KS M ISO 787-4-2022 General methods of test for pigments and extenders — Part 4: Determination of acidity or alkalinity of the aqueous extract
KS M ISO 787-10-2022 General methods of test for pigments and extenders — Part 10: Determination of density — Pyknometer method
KS M ISO 787-23-2022 General methods of test for pigments and extenders — Part 23: Determination of density(using a centrifuge to remove entrained air)
KS M ISO 787-11-2022 General methods of test for pigments and extenders — Part 11: Determination of tamped volume and apparent density after tamping
KS M ISO 787-24-2022 General methods of test for pigments and extenders — Part 24: Determination of relative tinting strength of coloured pigments and relative scattering power of white pigments — Photometric methods

International Organization for Standardization (ISO), General Tablet Hardness

ISO 787-10:1981 General methods of test for pigments and extenders — Part 10: Determination of density — Pyknometer method
ISO 11127-4:2020 Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 4: Assessment of hardness by a glass slide test

Danish Standards Foundation, General Tablet Hardness

DS/EN ISO 787-10:1995 General methods of test for pigments and extenders - Part 10: Determination of density - Pycnometer method
DS/EN ISO 787-24:1995 General methods of test for pigments and extenders - Part 24: Determination of relative tinting strength of coloured pigments and relative scattering power of white pigments - Photometric methods

GOSTR, General Tablet Hardness

GOST R 58400.1-2019 Automobile roads of general use. Petroleum-based bitumen binder. Specifications based on operational temperature range
GOST R 58400.5-2019 Automobile roads of general use. Petroleum based bitumen binders. Method of aging under the action of pressure and temperature (PAV)
GOST R 58400.11-2019 Automobile roads of general use. Petroleum-based bitumen binders. Method of determining the temperature of cracking using the device ABCD
GOST R 58400.8-2019 Automobile roads of general use. Petroleum-based bitumen binders. Method of determining the flexural creep stiffness at subzero temperatures using the bending beam rheometer (BBR)

AENOR, General Tablet Hardness

UNE-EN 623-2:1995 ADVANCED TECHNICAL CERAMICS. MONOLITHIC CERAMICS. GENERAL AND TEXTURAL PROPERTIES. PART 2: DETERMINATION OF DENSITY AND POROSITY.
UNE 55575:1981 SURFACE ACTIVE AGENTS. GENERAL METHOD FOR DETERMINATION OF ARSENIC. PHOTOMETRIC METHOD WITH SILVER DIETHYLDITHIOCARBAMATE
UNE-EN ISO 787-10:1996 GENERAL METHODS OF TEST FOR PIGMENTS AND EXTENDERS. PART 10: DETERMINATION OF DENSITY. PYCNOMETER METHOD. (ISO 787-10:1993).
UNE 16516-2:2006 Assembly tools for screws and nuts. Screwdrivers for slotted head screws. Part 2: General requirements, lengths of blades and marking of hand operated screwdrivers
UNE-EN ISO 787-11:1996 GENERAL METHODS OF TEST FOR PIGMENTS AND EXTENDERS. PART 11: DETERMINATION OF TAMPED VOLUME AND APPARENT DENSITY AFTER TAMPING. (ISO 787-11:1981).
UNE-EN ISO 787-2:1996 GENERAL METHODS OF TEST FOR PIGMENTS AND EXTENDERS. PART 2: DETERMINATION OF MATTER VOLATILE AT 105 DEGREES C. (ISO 787-2:1981).
UNE-EN ISO 787-23:1996 GENERAL METHODS OF TEST FOR PIGMENTS AND EXTENDERS. PART 23: DETERMINATION OF DENSITY (USING A CENTRIFUGE TO REMOVE ENTRAINED AIR ). (ISO 787-23:1979).
UNE 16520-2:2008 Assembly tools for screws and nuts. Screwdrivers for cross-recessed head screws. Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers.
UNE-EN ISO 787-24:1996 GENERAL METHODS OF TEST FOR PIGMENTS AND EXTENDERS. PART 24: DETERMINATION OF RELATIVE TINTING STRENGTH OF COLOURED PIGMENTS AND RELATIVE SCATTERING POWER OF WHITE PIGMENTS. PHOTOMETRIC METHODS. (ISO 787-24:1985).

Lithuanian Standards Office , General Tablet Hardness

LST EN ISO 787-10:2002 General methods of test for pigments and extenders - Part 10: Determination of density - Pycnometer method (ISO 787-10:1993)
LST EN ISO 787-11:2002 General methods of test for pigments and extenders - Part 11: Determination of tamped volume and apparent density after tamping (ISO 787-11:1981)

RU-GOST R, General Tablet Hardness

PNST 83-2016 Automobile roads of general use. Petroleum-based bitumen binders. The method determining of the temperature of cracking using the device ABCD
PNST 80-2016 Automobile roads of general use. Petroleum-based bitumen binders. Method for determination of the volume of amendments, correction to a base temperature
PNST 95-2016 Automobile roads of general use. Hot asphalt mixtures and asphalt. Method for determining the degree of coating grains of aggregate by asphalt binder

American Society for Testing and Materials (ASTM), General Tablet Hardness

ASTM A635/A635M-05 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for
ASTM A635/A635M-13 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for
ASTM A635/A635M-09b Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for

ES-UNE, General Tablet Hardness

UNE-EN 13286-1:2022 Unbound and hydraulically bound mixtures - Part 1: Test methods for laboratory reference density and water content - Introduction, general requirements and sampling