ZH
RU
ES

Plastic resin three-point bending test

Plastic resin three-point bending test, Total:48 items.

In the international standard classification, Plastic resin three-point bending test involves: Materials for aerospace construction, Plastics, Materials for the reinforcement of composites, Reinforced plastics, Valves, Pipeline components and pipelines, Inorganic chemicals, Refractories, Insulating materials, Road vehicle systems, Products of the textile industry, Raw materials for rubber and plastics, Construction materials, Waxes, bituminous materials and other petroleum products, Adhesives, Structures of buildings.

British Standards Institution (BSI), Plastic resin three-point bending test

BS EN 2746:1998 Glass fibre reinforced plastics - Flexural test - Three point bend method
BS 2782-10 Method 1005:1977 Methods of testing plastics. Glass reinforced plastics. Determination of flexural properties. Three point method
BS PD CEN/TS 15963:2014 Bitumen and bituminous binders. Determination of the fracture toughness temperature by a three point bending test on a notched specimen
BS DD CEN/TS 15963:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen

American Society for Testing and Materials (ASTM), Plastic resin three-point bending test

ASTM D5023-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-99 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D6272-02(2008)e1 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D6272-17 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D6272-17e1 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D8058-23 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D5934-96 Standard Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending
ASTM D8458-22 Standard Test Method for Evaluation of Fatigue Performance of Asphalt Mixtures Using the Three-Point Bending Cylinder (3PBC) Test
ASTM D8058-17 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D8058-17e1 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D5934-02 Standard Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending
ASTM D6272-10 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D6272-02 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D6272-00 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending

Professional Standard - Textile, Plastic resin three-point bending test

FZ/T 60042-2014 3D braided polymer matrix composites.Test method for bending properties
FZ/T 60042-2013 Test method for flexural properties of resin-based three-dimensional braided composites

European Committee for Standardization (CEN), Plastic resin three-point bending test

EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
EN 12100:1997 Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports

Danish Standards Foundation, Plastic resin three-point bending test

DS/EN 2746:1999 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method

Lithuanian Standards Office , Plastic resin three-point bending test

LST EN 2746-2001 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method

AENOR, Plastic resin three-point bending test

UNE-EN 2746:1999 AEROSPACE SERIES. GLASS FIBRE REINFORCED PLASTICS. FLEXURAL TEST. THREE POINT BEND METHOD.

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Plastic resin three-point bending test

GB/T 33621-2017 Test method for bending properties of 3D braided fabric and its polymer matrix composites

German Institute for Standardization, Plastic resin three-point bending test

DIN EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998
DIN EN 12100:1997 Plastics piping systems - Polyethylene (PE) valves - Test method for the resistance to bending between supports; German version EN 12100:1997
DIN 51902:1997 Testing of carbon materials - Determination of flexural strength by three point method - Solid matters
DIN 54813:1994 Testing of plastics; testing of joints of textile glass reinforced polyester resins; determination of the breaking load by the bending shear test
DIN 51902:2020 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN 51902:2020-12 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN 16841:2012 Plastics piping systems - Testing of pipes and components - Determination of flexural creep of plastics by four-point loading

Malaysia Standards, Plastic resin three-point bending test

MS 1473-1999 Method of test for measuring the dynamic mechanical properties of plastics using three point bending

国家市场监督管理总局、中国国家标准化管理委员会, Plastic resin three-point bending test

GB/T 38978-2020 Refractory products—Determination of stress-strain (three-point bending method）

Japanese Industrial Standards Committee (JISC), Plastic resin three-point bending test

JIS K 7084:1993 Testing method for impact properties of carbon fibre reinforced plastics by instrumented 3-point bending impact test

Society of Automotive Engineers (SAE), Plastic resin three-point bending test

SAE J949-2009 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three Point Bending Test
SAE J949-2022 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three-Point Bending Test

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Plastic resin three-point bending test

PREN 6061-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Sandwich Flexural Strength 4 Point Bending (Edition P1)

European Association of Aerospace Industries, Plastic resin three-point bending test

AECMA PREN 2746-1990 Aerospace Series Glass Fibre Reinforced Plastics Determination of Flexural Properties Three Point Bend Method Issue P 1
AECMA PREN 6061-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Sandwich Flexural Strength 4 Point Bending Edition P1

未注明发布机构, Plastic resin three-point bending test

BS 2782-10-Method 1008B:1996(1999) Methods of testing Plastics — Part 10 : Glass reinforced plastics — Method 1008B : Determination of flexural strength on rods made of roving - reinforced resin

Aerospace, Security and Defence Industries Association of Europe (ASD), Plastic resin three-point bending test

ASD-STAN PREN 6061-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Sandwich Flexural Strength 4 Point Bending (Edition P1)

Association Francaise de Normalisation, Plastic resin three-point bending test

NF T76-336-3/IN1:2010 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 3 : creep deformation test at cyclic climate conditions with specimens loaded in bending shear.
NF T76-336-3:2010 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 3 : creep deformation test at cyclic climate conditions with specimens loaded in bending shear.
NF T76-336-3/IN1*NF EN 15416-3/IN1:2019 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 3 : creep deformation test at cyclic climate conditions with specimens loaded in bending shear
NF T76-336-3*NF EN 15416-3+A1:2019 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 3 : creep deformation test at cyclic climate conditions with specimens loaded in bending shear