ZH
RU
ES

Thickness a

Thickness a, Total:40 items.

In the international standard classification, Thickness a involves: Materials for aerospace construction, Non-ferrous metals, Powder metallurgy, Components for aerospace construction.


Aerospace, Security and Defence Industries Association of Europe (ASD), Thickness a

  • ASD-STAN PREN 2071-1989 Sheets in Aluminium and Aluminium Alloys - Thickness A Less Than or Equal to 6 mm - Dimensions (C6/A01)
  • ASD-STAN PREN 4411-1998 Aerospace Series Sheets, Cold Rolled in Steel Thickness 0,5 mm Less Than or Equal to a Less Than or Equal to 3,0 mm Dimensions (Edition P 1)
  • ASD-STAN PREN 4409-1998 Aerospace Series Square Bars, Extruded in Aluminium and Aluminium Alloys Thickness 6 mm Less Than or Equal to a Less Than or Equal to 200 mm Dimensions (Edition P 1)
  • ASD-STAN PREN 4410-1998 Aerospace Series Rectangular Bars, Extruded in Aluminium and Aluminium Alloys Thickness 6 mm Less Than or Equal to a Less Than or Equal to 160 mm Dimensions (Edition P 1)
  • ASD-STAN PREN 2622-1996 Aerospace Series Circular Tube for Fluids in Heat Resisting Alloys Diameter 3,2 mm Less Than or Equal to D Less Than or Equal to 100 mm Thickness 0,32 mm Less Than or Equal to a Less Than or Equal to 2,5 mm Dimensions (Edition P 1)
  • ASD-STAN PREN 4180-1994 Aerospace Series Titanium and Titanium Alloys Circular Tubes for Fluids Large Tolerances Diameter 4 mm Less Than or Equal to D Less Than or Equal to 40 mm Thickness 0,4 mm Less Than or Equal to a Less Than or Equal to 2 mm Dimensions (Edition P 1)
  • ASD-STAN PREN 3506-1996 Aerospace Series Hot Rolled Sheets and Plates in Heat Resisting Alloys Thickness 2,0 mm Less Than or Equal to a Less Than or Equal to 100 mm Dimensions (Edition P 1)

German Institute for Standardization, Thickness a

  • DIN EN 2599:2002 Aerospace series - Strips in aluminium and aluminium alloys - Thickness 0,25 mm a 3,2 mm; Dimensions; German version EN 2599:2001
  • DIN EN 2366:2019 Aerospace series - Sheets and strips - Heat resisting alloys - Cold rolled - Thickness a 3 mm - Dimensions; German and English version EN 2366:2019

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Thickness a

  • PREN 2071-1989 Sheets in Aluminium and Aluminium Alloys - Thickness A Less Than or Equal to 6 mm - Dimensions (C6/A01)

ES-UNE, Thickness a

  • UNE-EN 2366:2019 Aerospace series - Sheets and strips - Heat resisting alloys - Cold rolled - Thickness a = 3 mm - Dimensions
  • UNE-EN 2033:2017 Aerospace series - Strips, cold rolled in steel, Thickness 0,1 mm = a = 2,5 mm - Dimensions
  • UNE-EN 2131:2001 Aerospace series- Plates in aluminium alloys- Thickness 6 mm<a<160 mm- Dimensions. (Endorsed by AENOR in February of 2002.)
  • UNE-EN 2589:2017 Aerospace series - Steel - Sheet and strip, cold rolled - Thickness 0,1 mm = a = 3 mm - Dimensions
  • UNE-EN 2339:2001 Aerospace series - Sheets, cold rolled in titanium and titanium alloys - Thickness 0,2 mm <= a <= 6 mm - Dimensions. (Endorsed by AENOR in December of 2001.)
  • UNE-EN 2071:2001 Aerospace series- Sheets in aluminium and aluminium alloys- Thickness 0,25<a<6 mm- Dimensions. (Endorsed by AENOR in February of 2002.)
  • UNE-EN 2338:2001 Aerospace series - Sheets, hot rolled in titanium and titanium alloys - Thickness 0,8 mm <= a <= 6 mm - Dimensions. (Endorsed by AENOR in December of 2001.)
  • UNE-EN 3506:2001 Aerospace series - Hot rolled sheets and plates in heat resisting alloys - Thickness 2,0 mm <= a <= 100 mm - Dimensions. (Endorsed by AENOR in December of 2001.)
  • UNE-EN 2045:2001 Aerospace series- Square bars, drawn in aluminium alloys- Tolerance class h 11- Thickness 6 mm<a<50 mm- Dimensions. (Endorsed by AENOR in February of 2002.)
  • UNE-EN 6025:2021 Aerospace series - Plates - Aluminium alloy 2024 - Close tolerances flatness - Thickness - 6 mm < a = 55 mm - Dimensions
  • UNE-EN 3842:2001 Aerospace series - Circular tubes for fluids in corrosion resistant steel - Diameter 3,2 mm <= D <= 100 mm - Thickness 0,32 mm <= a <= 2,5 mm - Dimensions. (Endorsed by AENOR in December of 2001.)

British Standards Institution (BSI), Thickness a

  • BS EN 2366:2019 Aerospace series. Sheets and strips. Heat resisting alloys. Cold rolled. Thickness a ≤ 3 mm. Dimensions
  • BS EN 2131:2002 Aerospace series - Plates in aluminium alloys - Thickness 6 mm a 160 mm - Dimensions
  • BS EN 2617:2001 Aerospace Series - Plates in titanium and titanium alloys - Thickness 6 mm a 100 mm - Dimensions

European Association of Aerospace Industries, Thickness a

  • AECMA PREN 2366-1983 Sheets and Strips Heat Resisting Alloys Cold Rolled Thickness a Less Than or Equal to 3 mm Dimensions Aerospace Series Edition 1
  • AECMA PREN 4062-1996 Aerospace Series Rolled Foil in Filler Metal for Brazing Thickness a Less Than or Equal to 1 mm Dimensions Edition P2
  • AECMA PREN 4062-1994 Aerospace Series Filler Metal for Brazing Rolled Foil Thickness a Less Than or Equal to 1 mm Dimensions Edition P1

Association Francaise de Normalisation, Thickness a

  • NF L12-140*NF EN 2366:2019 Aerospace series - Sheets and strips - Heat resisting alloys - Cold rolled - Thickness a less than or equal to 3 mm - Dimensions
  • NF L15-125*NF EN 2131:2002 Aerospace series - Plates in aluminium alloys - Thickness 6 mm inferior to a inferior or equal to 160 mm - Dimensions

European Committee for Standardization (CEN), Thickness a

  • EN 2599:2001 Aerospace series - Strips in aluminium and aluminium alloys; Thickness 0,25 mm <= a <= 3,2 mm - Dimensions
  • EN 2617:2001 Aerospace series - Plates in titanium and titanium alloys - Thickness 6 mm <= a <= 100 mm; Dimensions
  • EN 2338:2001 Aerospace series - Sheets, hot rolled in titanium and titanium alloys - Thickness 0,8 mm <= a <= 6 mm; Dimensions
  • EN 2339:2001 Aerospace series - Sheets, cold rolled in titanium and titanium alloys - Thickness 0,2 mm <= a <= 6 mm; Dimensions
  • EN 3506:2001 Aerospace series - Hot rolled sheets and plates in heat resisting alloys - Thickness 2,0 mm <= a <= 100 mm; Dimensions
  • EN 2045:2001 Aerospace series - Square bars, drawn in aluminium and aluminium alloys - Tolerance class h 11; Thickness 6 mm <= a <= 50 mm; Dimensions

Danish Standards Foundation, Thickness a

  • DS/EN 6025:2021 Aerospace series – Plates – Aluminium alloy 2024 – Close tolerances flatness – Thickness – 6 mm ≤ a ≤ 55 mm – Dimensions
  • DS/EN 2131:2002 Aerospace series - Plates in aluminium alloys - Thickness 6 mm < a < 160 mm - Dimensions

PL-PKN, Thickness a

  • PN-EN 6025-2021-08 E Aerospace series -- Plates -- Aluminium alloy 2024 -- Close tolerance flatness -- Thickness -- 6 mm ≤ a ≤ 55 mm -- Dimensions

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Thickness a

Lithuanian Standards Office , Thickness a

  • LST EN 2131-2002 Aerospace series - Plates in aluminium alloys - Thickness 6 mm < a < 160 mm - Dimensions

  astm thickness, Sample thickness, thickness, Penetration thickness, surface thickness, Electrode thickness, Transmission thickness, paper thickness, Penetration thickness, thickness test, Coating thickness, Floor thickness, Fluorescence thickness, Eddy current thickness, Chrome Plating Thickness Measurement, Mass Thickness vs Thickness, Fluorescence thickness thickness, Thickness a, a thickness, Thickness a.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved