ZH

RU

ES

bulk density bulk density

bulk density bulk density, Total:393 items.

In the international standard classification, bulk density bulk density involves: Construction materials, Fertilizers, Measurement of volume, mass, density, viscosity, Products of the chemical industry, Cutting tools, Nuclear energy engineering, Powder metallurgy, Analytical chemistry, Refractories, Soil quality. Pedology, Metalliferous minerals, Fuels, Non-metalliferous minerals, Inorganic chemicals, Milk and milk products, Protection of and in buildings, Paper and board, Paper products, Paint ingredients, Tea. Coffee. Cocoa, Air quality, Non-ferrous metals, Magnetic materials, Ceramics, Road vehicles in general, Plastics, Testing of metals, Wastes, Cereals, pulses and derived products, Aerospace electric equipment and systems, Pesticides and other agrochemicals, Waxes, bituminous materials and other petroleum products, Textile auxiliary materials, Particle size analysis. Sieving, Road engineering, Mining and quarrying, Rubber and plastics products.


European Committee for Standardization (CEN), bulk density bulk density

  • EN 772-4:1998 Methods of test for masonry units - Part 4: Determination of real and bulk density and of total and open porosity for natural stone masonry units
  • EN 1237:1995 Fertilizers - Determination of bulk density (tapped) (ISO 5311:1992 modified)
  • CEN/TS 15401:2010 Solid recovered fuels - Determination of bulk density
  • EN 20534:1993 Paper and Board - Determination of Thickness and Apparent Bulk Density or Apparent Sheet Density (ISO 534 : 1988)
  • EN 1236:1995 Fertilizers - Determination of bulk density (loose) (ISO 3944:1992 modified)
  • EN ISO 17828:2015 Solid biofuels - Determination of bulk density (ISO 17828:2015)
  • prEN ISO 23145-1 rev Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of bulk density of ceramic powders - Part 1: Tap density (ISO 23145-1:2007)
  • FprEN 12697-7-2021 Bituminous mixtures - Test methods - Part 7: Determination of the bulk density of bituminous specimens by gamma rays

AENOR, bulk density bulk density

  • UNE-EN 1236:1996 FERTILIZERS. DETERMINATION OF BULK DENSITY (LOOSE).
  • UNE 32205:1984 COKE. DETERMINATION OF BULK DENSITY.
  • UNE-EN ISO 7837:2001 FERTILIZERS. DETERMINATION OF BULK DENSITY (LOOSE) OF FINE-GRAINED FERTILIZERS. (ISO 7837:1992)
  • UNE-EN 1237:1996 FERTILIZERS. DETERMINATION OF BULK DENSITY (TAPPED).
  • UNE-EN ISO 12625-3:2015 Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk (ISO 12625-3:2014)
  • UNE-EN 1097-3:1999 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES. PART 3: DETERMINATION OF LOOSE BULK DENSITY AND VOIDS.
  • UNE 53137:1977 PLASTICS. PVC RESINS. DETERMINATION OF THE COMPACTED APPARENT BULK DENSITY
  • UNE-EN 1015-6:1999/A1:2007 Methods of test for mortar for masonry - Part 6: Determination of bulk density of fresh mortar
  • UNE-EN 1015-6:1999 METHODS OF TEST FOR MORTAR FOR MASONRY - PART 6: DETERMINATION OF BULK DENSITY OF FRESH MORTAR
  • UNE-EN 993-18:2003 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum.
  • UNE-EN ISO 10545-3:1997 CERAMIC TILES. PART 3: DETERMINATION OF WATER ABSORPTION, APPARENT POROSITY, APPARENT RELATIVE DENSITY AND BULK DENSITY. (ISO 10545-3:1995), INCLUDING TECHNICAL CORRIGENDUM 1:1997).
  • UNE-EN 1015-10:2000/A1:2007 Methods of test for mortar for masonry - Part 10: Determination of dry bulk density of hardened mortar
  • UNE-EN 993-17:1999 METHODS OF TEST FOR DENSE SHAPED REFARACTORY PRODUCTS - PART 17: DETERMINATION OF BULK DENSITY OF GRANULAR MATERIALS BY THE MERCURY METHOD WITH VACCUM
  • UNE-EN 993-1:1996 METHODS OF TEST FOR DENSE SHAPED REFRACTORY PRODUCTS. PART 1: DETERMINATION OF BULK DENSITY, APPARENT POROSITY AND TRUE POSORITY.
  • UNE-EN ISO 7971-3:2010 Cereals - Determination of bulk density, called mass per hectolitre - Part 3: Routine method (ISO 7971-3:2009)
  • UNE-EN ISO 7971-1:2010 Cereals - Determination of bulk density, called mass per hectolitre - Part 1: Reference method (ISO 7971-1:2009)

未注明发布机构, bulk density bulk density

  • BS EN 1236:1995(2010) Fertilizers — Determination of bulk density (loose)
  • BS EN ISO 7837:2001(2010) Fertilizers — Determination of bulk density (loose) of fine - grained fertilizers
  • BS EN 1237:1995(2010) Fertilizers — Determination of bulk density (tapped)
  • BS ISO 8967:2005(2006) Dried milk and dried milk products — Determination of bulk density
  • BS ISO 9136-1:2004(2008) Abrasive grains — Determination of bulk density — Part 1 : Macrogrits
  • DIN EN 384:2004 Timber for load-bearing purposes – determination of characteristic values for mechanical properties and bulk density
  • BS ISO 3852:2007(2008) Iron ores for blast furnace and direct reduction feedstocks — Determination of bulk density
  • BS 3482-10:1991(1999) Methods of test for Desiccants — Part 10 : Determination of bulk density (dry basis)
  • BS EN 1094-4:1995(1999) Insulating refractory products — Part 4 : Determination of bulk density and true porosity
  • DIN EN 12390-7:2019 Testing of hardened concrete – Part 7: Bulk density of hardened concrete
  • BS 1902-3.17:1990(2011) Methods of testing Refractory materials — Part 3 : General and textural properties — Section 3.17 Determination of volume and bulk density of dense shaped products (methods 1902 - 317)

ES-AENOR, bulk density bulk density

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, bulk density bulk density

  • GB/T 13566.1-2008 Fertilizers.Determination of bulk density.Part 1:Loose density
  • GB 6286-1986 Method for Determination of Bulk Density of Molecular Sieve
  • GB/T 6286-1986 Determination of bulk density for molecular sieve
  • GB/T 23771-2009 Determination of bulk density for inorganic chemical products
  • GB/T 21877-2015 Dyestuffs and intermediate of dyes.Determination of tapping density
  • GB/T 21877-2008 Dyestuffs and intermediate of dyes.Determination of tapping density
  • GB/T 8331-2008(英文版) Determination of bulk density of ion exchange resins in wet state
  • GB/T 16913.3-1997 Methods of dust character test--Part 3: Determination of bulk density--Natural bulk method
  • GB/T 3171.1-1982 Determination of apparent density of aluminum powder--Funnel method
  • GB/T 6522-1986 Aluminium oxide powders--Determination of apparent density
  • GB/T 20316.2-2006 Abrasive grains. Determination of bulk density. Part 2: Microgrits
  • GB/T 18798.5-2013 Instant tea.Part 5:Methods for determination of free-flow and compacted bulk densities
  • GB/T 3171.2-1982 Determination of apparent density of aluminum powder--Volume meter method
  • GB/T 20316.1-2009 Abrasive grains.Determiantaion of bulk density.Part 1:Macrogrits
  • GB/T 4107-1983 Magnesium powders--Determination of apparent density--Scott volumetric method
  • GB/T 4107-2004 Determination of apparant density of magnesium powder Scott volumetric method
  • GB/T 5211.4-1985 Determination of tamped volume and apparent density of pigments
  • GB 5211.4-1985 Determination of Apparent Density of Packed Volume of Pigments
  • GB/T 1479-1984 Metallic powders--Determination of apparent density--Part 1:Funnel method
  • GB/T 1479.1-2011 Metallic powders—Determination of apparent density—Part 1:Funnal method
  • GB/T 30202.1-2013 Test method for granular coal-based activated carbon for desulfurization and denitration process.Part 1 : Bulk density
  • GB/T 5061-1998 Metallic powders--Determination of apparent density Part 3: Oscillating funnel method
  • GB/T 31057.1-2014 Granular materials.The physical properties.Part 1:Determination of apparent density
  • GB/T 5060-1985 Metallic powders--Determination of apparent density--Part 2: Scott volumeter method
  • GB/T 1479.2-2011 Metallic powders—Determination of apparent density—Part 2:Scott volumeter method

Danish Standards Foundation, bulk density bulk density

  • DS/EN ISO 7837:2000 Fertilizeres - Determination of bulk density (loose) of fine-grained fertilizers
  • DS/EN 1237:1996 Fertilizers - Determination of bulk density (tapped)
  • DS/EN 1236:1996 Fertilizers - Determination of bulk density (loose)
  • DS/EN 1097-3:1998 Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids
  • DS/EN 725-9:2006 Advanced technical ceramics - Methods of test for ceramic powders - Part 9: Determination of un-tapped bulk density
  • DS/EN 1015-6/A1:2007 Methods of test for mortar for masonry - Part 6: Determination of bulk density of fresh mortar
  • DS/EN 1015-6:1999 Methods of test for mortar for masonry - Part 6: Determination of bulk density of fresh mortar
  • DS/EN ISO 7971-1:2009 Cereals - Determination of bulk density, called mass per hectolitre - Part 1: Reference method
  • DS/EN ISO 7971-3:2009 Cereals - Determination of bulk density, called mass per hectolitre - Part 3: Routine method
  • DS/EN 993-17:1999 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vacuum
  • DS/EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum
  • DS/EN 1015-10/A1:2007 Methods of test for mortar for masonry - Part 10: Determination of dry bulk density of hardened mortar
  • DS/EN 1015-10:2002 Methods of test for mortar for masonry - Part 10: Determination of dry bulk density of hardened mortar
  • DS/EN 772-4:1999 Methods of test for masonry units - Part 4: Determination of real and bulk density and of total and open porosity for natural stone masonry units
  • DS/EN 725-8:2006 Advanced technical ceramics - Methods of test for ceramic powders - Part 8: Determination of tapped bulk density

American Society for Testing and Materials (ASTM), bulk density bulk density

  • ASTM UOP563-14 Packed Apparent Bulk Density of Molecular Sieves
  • ASTM D7481-18 Standard Test Methods for Determining Loose and Tapped Bulk Densities of Powders using a Graduated Cylinder
  • ASTM UOP294-14 Apparent Bulk Density of Catalyst Particles
  • ASTM UOP778-81 Apparent Bulk Density of Extruded Catalyst
  • ASTM UOP254-14 Apparent Bulk Density of Fluid Cracking Catalyst
  • ASTM UOP762-76 Apparent Bulk Density of Solid Phosphoric Acid Catalyst
  • ASTM D6347/D6347M-99 Standard Test Method for Determination of Bulk Density of Coal Using Nuclear Backscatter Depth Density Methods
  • ASTM D6347/D6347M-05(2018) Standard Test Method for Determination of Bulk Density of Coal Using Nuclear Backscatter Depth Density Methods
  • ASTM E873-82(2006) Standard Test Method for Bulk Density of Densified Particulate Biomass Fuels
  • ASTM E873-82(2013) Standard Test Method for Bulk Density of Densified Particulate Biomass Fuels
  • ASTM E873-82(2019) Standard Test Method for Bulk Density of Densified Particulate Biomass Fuels
  • ASTM D4531-86(1996) Standard Test Methods for Bulk Density of Peat and Peat Products
  • ASTM D7481-09 Standard Test Methods for Determining Loose and Tapped Bulk Densities of Powders using a Graduated Cylinder
  • ASTM D5057-90(2006) Standard Test Method for Screening Apparent Specific Gravity and Bulk Density of Waste
  • ASTM D5057-90(2001) Standard Test Method for Screening Apparent Specific Gravity and Bulk Density of Waste
  • ASTM D5057-90(1996) Standard Test Method for Screening Apparent Specific Gravity and Bulk Density of Waste
  • ASTM D4292-23 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke
  • ASTM C29/C29M-07 Standard Test Method for Bulk Density ("Unit Weight") and Voids in Aggregate
  • ASTM D5057-10 Standard Test Method for Screening Apparent Specific Gravity and Bulk Density of Waste
  • ASTM D5057-17 Standard Test Method for Screening Apparent Specific Gravity and Bulk Density of Waste
  • ASTM D7454-19 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus
  • ASTM E727/E727M-08(2013)e1 Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
  • ASTM E727-91(1998) Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
  • ASTM E727-02 Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
  • ASTM E727/E727M-08(2020) Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
  • ASTM D8167/D8167M-18a Standard Test Method for In-Place Bulk Density of Soil and Soil-Aggregate by a Low-Activity Nuclear Method (Shallow Depth)
  • ASTM D8167/D8167M-18 Standard Test Method for In-Place Bulk Density of Soil and Soil-Aggregate by a Low-Activity Nuclear Method (Shallow Depth)
  • ASTM D6752-02a Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
  • ASTM D6752-02 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
  • ASTM D6683-19 Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids as Function of Compressive Stress
  • ASTM D2726/D2726M-21 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Asphalt Mixtures
  • ASTM D2726-08 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
  • ASTM D2726-09 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
  • ASTM D2726/D2726M-19 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Asphalt Mixtures
  • ASTM D2726/D2726M-17 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Asphalt Mixtures
  • ASTM C914-95(2004) Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
  • ASTM C914-09 Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
  • ASTM C914-09(2015) Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
  • ASTM D6683-01 Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids
  • ASTM D8167/D8167M-23 Standard Test Method for In-Place Bulk Density of Soil and Soil-Aggregate by a Low-Activity Nuclear Method (Shallow Depth)
  • ASTM D8167/D8167M-23e1 Standard Test Method for In-Place Bulk Density of Soil and Soil-Aggregate by a Low-Activity Nuclear Method (Shallow Depth)
  • ASTM D4699-03(2013) Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles
  • ASTM D6111-19 Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement
  • ASTM D4781-03(2008) Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
  • ASTM D4164-13(2018) Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers
  • ASTM D6111-19a Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement
  • ASTM D6111-18 Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement
  • ASTM D4164-13 Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers
  • ASTM D4781-03(2013) Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
  • ASTM D6111-13 Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement
  • ASTM D6111-13a Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement
  • ASTM D6111-09 Standard Test Method for Bulk Density and Specific Gravity of Plastic Lumber and Shapes by Displacement
  • ASTM C134-95(2023) Standard Test Methods for Size, Dimensional Measurements, and Bulk Density of Refractory Brick and Insulating Firebrick

Universal Oil Products Company (UOP), bulk density bulk density

  • UOP 563-2014 Packed Apparent Bulk Density of Molecular Sieves
  • UOP 778-2007 Packed Apparent Bulk Density (ABD) of Extruded Catalyst
  • UOP 294-2014 Apparent Bulk Density of Catalyst Particles
  • UOP 254-2014 Apparent Bulk Density of Fluid Cracking Catalyst

Lithuanian Standards Office , bulk density bulk density

  • LST EN 1236-2002 Fertilizers - Determination of bulk density (loose) (ISO 3944:1992 modified)
  • LST EN ISO 7837:2001 Fertilizers - Determination of bulk density (loose) of fine-grained fertilizers (ISO 7837:1992)
  • LST EN 1237-2002 Fertilizers - Determination of bulk density (tapped) (ISO 5311:1992 modified)
  • LST ISO 6782:1995 Aggregates for concrete. Determination of bulk density
  • LST EN ISO 12625-3:2005 Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness and apparent bulk density (ISO 12625-3:2005)
  • LST ISO 8967:2006 Dried milk and dried milk products - Determination of bulk density (identical ISO 8967:2005)
  • LST EN 1097-3-2002 Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids
  • LST EN 725-9-2006 Advanced technical ceramics - Methods of test for ceramic powders - Part 9: Determination of un-tapped bulk density
  • LST EN 1015-6-2002 Methods of test for mortar for masonry - Part 6: Determination of bulk density of fresh mortar
  • LST EN 1015-6-2002/A1-2007 Methods of test for mortar for masonry - Part 6: Determination of bulk density of fresh mortar
  • LST EN 993-18-2003 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum
  • LST EN 993-17-2001 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vacuum
  • LST EN 1015-10-2002 Methods of test for mortar for masonry - Part 10: Determination of dry bulk density of hardened mortar
  • LST EN 1015-10-2002/A1-2007 Methods of test for mortar for masonry - Part 10: Determination of dry bulk density of hardened mortar
  • LST EN 772-4-2000 Methods of test for masonry units - Part 4: Determination of real and bulk density and of total and open porosity for natural stone masonry units
  • LST EN 725-8-2006 Advanced technical ceramics - Methods of test for ceramic powders - Part 8: Determination of tapped bulk density
  • LST EN ISO 7971-3:2009 Cereals - Determination of bulk density, called mass per hectolitre - Part 3: Routine method (ISO 7971-3:2009)
  • LST EN ISO 7971-1:2009 Cereals - Determination of bulk density, called mass per hectolitre - Part 1: Reference method (ISO 7971-1:2009)

International Organization for Standardization (ISO), bulk density bulk density

  • ISO 3944:1992 Fertilizers; determination of bulk density (loose)
  • ISO 9136:1989 Abrasive macrograins; determination of bulk density
  • ISO 9161:2004 Uranium dioxide powder - Determination of apparent density and tap density
  • ISO 7837:1992 Fertilizers; determination of bulk density (loose) of fine-grained fertilizers
  • ISO 5311:1983 Fertilizers — Determination of bulk density (tapped)
  • ISO 6782:1982 Aggregates for concrete; Determination of bulk density
  • ISO 3944:1980 Fertilizers — Determination of bulk density (loose)
  • ISO 3944:1977 Title missing - Legacy paper document
  • ISO/CD 18708:2023 Solid recovered fuels — Determination of bulk density
  • ISO 8967:2005 | IDF 134:2005 Dried milk and dried milk products — Determination of bulk density
  • ISO 9136-1:2004 Abrasive grains - Determination of bulk density - Part 1: Macrogrits
  • ISO 6770:1982 Instant tea; Determination of free-flow and compacted bulk densities
  • ISO 8460:1987 Instant coffee; Determination of free-flow and compacted bulk densities
  • ISO 9136-2:1999 Abrasive grains - Determination of bulk density - Part 2: Microgrits
  • ISO 7837:1983 Fertilizers — Determination of bulk density (loose) of fine-grained fertilizers
  • ISO 5016:1986 Shaped insulating refractory products; Determination of bulk density and true porosity
  • ISO 12625-3:2014 Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk
  • ISO 7971-3:2019 Cereals — Determination of bulk density, called mass per hectolitre — Part 3: Routine method

VN-TCVN, bulk density bulk density

  • TCVN 4778-2009 Coal.Determination of bulk density
  • TCVN 4778-2015 Coal - Determination of bulk density for the use in charging of coke ovens
  • TCVN 5088-1990 Instant tea.Determination of free-flow and compacted bulk densities
  • TCVN 7034-2002 Instant coffee.Determination of free-flow and compacted bulk densities

German Institute for Standardization, bulk density bulk density

  • DIN EN 1236:1995-08 Fertilizers - Determination of bulk density (loose) (ISO 3944:1992 modified); German version EN 1236:1995
  • DIN EN ISO 7837:2000-06 Fertilizers - Determination of bulk density (loose) of fine-grained fertilizers (ISO 7837:1992); German version EN ISO 7837:2000
  • DIN EN ISO 12625-3:2014-09 Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness, apparent bulk density and bulk (ISO 12625-3:2014); German version EN ISO 12625-3:2014
  • DIN EN ISO 7837:2000 Fertilizers - Determination of bulk density (loose) of fine-grained fertilizers (ISO 7837:1992); German version EN ISO 7837:2000
  • DIN ISO 9136-2:2000 Abrasive grains - Determination of bulk density - Part 2: Microgrits (ISO 9136-2:1999)
  • DIN EN 15761:2010-04 Pre-shaped growing media - Determination of length, width, height, volume and bulk density; German version EN 15761:2009 / Note: To be replaced by DIN EN 15761 (2022-01).
  • DIN EN ISO 17828:2016-05 Solid biofuels - Determination of bulk density (ISO 17828:2015); German version EN ISO 17828:2015
  • DIN CEN/TS 15401:2010-09*DIN SPEC 1122:2010-09 Solid recovered fuels - Determination of bulk density; German version CEN/TS 15401:2010
  • DIN 52102:2013-10 Test methods for aggregates - Determination of dry bulk density by the cylinder method and calculation of the ratio of density
  • DIN ISO 9136-1:2006 Abrasive grains - Determination of bulk density - Part 1: Macrogrits (ISO 9136-1:2004);English version of DIN ISO 9136-1:2006-03
  • DIN EN 1237:1995-08 Fertilizers - Determination of bulk density (tapped) (ISO 5311:1992 modified); German version EN 1237:1995
  • DIN EN 1097-3:1998-06 Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids; German version EN 1097-3:1998
  • DIN EN ISO 10545-3:2018-06 Ceramic tiles - Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density (ISO 10545-3:2018); German version EN ISO 10545-3:2018
  • DIN 51705:2001-06 Testing of solid fuels - Determination of the bulk density of solid fuels
  • DIN 51918:2018-07 Testing of carbonaceous materials - Determination of bulk density and the open porosity
  • DIN ISO 9136-2:2000-07 Abrasive grains - Determination of bulk density - Part 2: Microgrits (ISO 9136-2:1999)
  • DIN EN 15761:2022-01 Pre-shaped growing media - Determination of the dimensions measured and bulk density; German and English version prEN 15761:2021 / Note: Date of issue 2021-12-10*Intended as replacement for DIN EN 15761 (2010-04).
  • DIN ISO 9136-1:2006-03 Abrasive grains - Determination of bulk density - Part 1: Macrogrits (ISO 9136-1:2004)
  • DIN 51932:2010-06 Testing of carbon materials - Determination of bulk density of cylindrically machined electrodes
  • DIN EN ISO 12625-3:2014 Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness, apparent bulk density and bulk (ISO 12625-3:2014); German version EN ISO 12625-3:2014
  • DIN 65180:1986 Aerospace; electrical circular connectors, medium and high density, rear release contacts; assembly procedures
  • DIN EN ISO 23145-1:2016-11 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of bulk density of ceramic powders - Part 1: Tap density (ISO 23145-1:2007); German version EN ISO 23145-1:2016
  • DIN EN 993-17:1999-01 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vakuum; German version EN 993-17:1998
  • DIN EN ISO 23145-2:2016-11 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of bulk density of ceramic powders - Part 2: Untapped density (ISO 23145-2:2012); German version EN ISO 23145-2:2016
  • DIN EN 12697-6:2020 Bituminous mixtures - Test methods - Part 6: Determination of bulk density of bituminous specimens
  • DIN EN 12697-6:2020-05 Bituminous mixtures - Test methods - Part 6: Determination of bulk density of bituminous specimens; German version EN 12697-6:2020
  • DIN EN ISO 7971-3:2020-02 Cereals - Determination of bulk density, called mass per hectolitre - Part 3: Routine method (ISO 7971-3:2019); German version EN ISO 7971-3:2019
  • DIN EN 1236:1995 Fertilizers - Determination of bulk density (loose) (ISO 3944:1992 modified); German version EN 1236:1995
  • DIN EN 12130:1998 Feather and down - Test methods - Determination of the filling power (bulk density); German version EN 12130:1998
  • DIN 54408:2007-10 Testing of ion exchangers - Determination of bulk weight density, equilibrium moisture content and solids
  • DIN 52170-1:2023-02 Determination of composition of hardened concrete - Part 1: General, terms, sampling and dry-bulk density
  • DIN EN 1094-4:1995-09 Insulating refractory products - Part 4: Determination of bulk density and true porosity of shaped products; German version EN 1094-4:1995
  • DIN EN 772-4:1998-10 Methods of test for masonry units - Part 4: Determination of real and bulk density and of total and open porosity for natural stone masonry units; German version EN 772-4:1998
  • DIN EN ISO 17892-2:2015-03 Geotechnical investigation and testing - Laboratory testing of soil - Part 2: Determination of bulk density (ISO 17892-2:2014); German version EN ISO 17892-2:2014
  • DIN EN 993-18:2002-11 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum; German version EN 993-18:2002
  • DIN EN ISO 7971-1:2010 Cereals - Determination of bulk density, called mass per hectolitre - Part 1: Reference method (ISO 7971-1:2009)
  • DIN EN 12697-7:2022 Bituminous mixtures - Test methods - Part 7: Determination of the bulk density of bituminous specimens by gamma rays
  • DIN EN 12697-7:2020 Bituminous mixtures - Test methods - Part 7: Determination of the bulk density of bituminous specimens by gamma rays; German and English version prEN 12697-7:2020
  • DIN EN 12697-7:2022-04 Bituminous mixtures - Test methods - Part 7: Determination of the bulk density of bituminous specimens by gamma rays; German version EN 12697-7:2022

RO-ASRO, bulk density bulk density

  • STAS SR 12271-19-1996 Uranium dioxide. Determination of apparent density and tap density
  • STAS SR ISO 3953:1993 Metallic powders. Determination of tap density
  • STAS 1314/18-1975 MANGANESE ORES AND CONCENTRATES Determination of the bulk density of loose product
  • STAS 5875-1980 PLASTICS Determination of bulk density of moulding mixtures that can be poured from a funnel
  • STAS 9546/5-1973 CHRYSOTYL ASBESTOS Determination of bulk apparent density in loose condition

RU-GOST R, bulk density bulk density

  • GOST 27801-1993 Alumina. Method for the determination of bulk density
  • GOST R 55450-2013 Organic fertilizers. Method for determination of bulk density
  • GOST R ISO 6770-2012 Instant tea. Determination of free flow and compacted bulk densities
  • GOST EN 1236-2013 Fertilizers. Method of determination of bulk density without loose
  • GOST ISO 1013-1995 Coke determination of bulk density in a large container
  • GOST ISO 8460-2015 IInstant coffee. Determination of free-flow and compacted bulk densities
  • GOST EN 1237-2013 Fertilizers. Method for determination of bulk density (tapped)
  • GOST 25732-1988 Iron and manganese ores, concentrates, agglomerates and pellets. Methods for determination of real, middle, bulk density and porosity
  • GOST ISO 7971-3-2021 Cereals. Determination of bulk density, called mass per hectolitre. Part 3. Routine method
  • GOST ISO 7971-3-2013 Determination of bulk density, called mass per hektolitre. Part 3. Routine method
  • PNST 106-2016 Automobile roads of general use. Hot asphalt mixtures and asphalt. Method for determination of bulk density

CZ-CSN, bulk density bulk density

YU-JUS, bulk density bulk density

  • JUS U.M1.009-1993 Concrete - Determination of bulk density of concrete
  • JUS C.A2.028-1978 Metallic powders - determination ofapparent density by cup andfunnel method
  • JUS H.B8.801-1991 Solid fertilizers.Determination of bulk densitv(loose)
  • JUS H.B8.803-1991 Solid fertilizers.Determination of bulk densitv(loose) of fine-qrained fertilizers
  • JUS C.A2.038-1987 Physical tests of meta/s. Determination ofapparent density ofmetallic povvders. Funnel method
  • JUS H.M8.114-1982 Testing of accessory materials for rubber industr/. Determination of pour density of pelleted carbon black
  • JUS C.A2.039-1987 Physical tests of metafs. ?etermination of apparent density of metallic povvders. Oscillating funnel method

Standard Association of Australia (SAA), bulk density bulk density

Association Francaise de Normalisation, bulk density bulk density

  • NF ISO 3852:1989 Minerais de fer - Détermination de la masse volumique apparente
  • NF EN ISO 9161:2021 Poudre de dioxyde d'uranium - Détermination de la masse volumique apparente et de la masse volumique après tassement
  • NF EN ISO 10545-3:2018 Carreaux et dalles céramiques - Partie 3 : détermination de l'absorption d'eau, de la porosité ouverte, de la densité relative apparente et de la masse volumique globale
  • NF ISO 2031:2015 Granulés de liège - Détermination de la masse volumique apparente
  • NF X31-502:1992 Qualité des sols - Méthodes physiques - Mesure de la masse volumique apparente - Densitomètre à membrane.
  • NF EN 15761:2010 Supports de culture préformés - Détermination de la longueur, de la largeur, de la hauteur, du volume et de la masse volumique apparente
  • NF EN ISO 17828:2016 Biocombustibles solides - Détermination de la masse volumique apparente
  • NF EN ISO 845:2009 Caoutchoucs et plastiques alvéolaires - Détermination de la masse volumique apparente
  • NF EN ISO 23145-1:2016 Céramiques techniques - Détermination de la masse volumique en vrac des poudres céramiques - Partie 1 : masse volumique après tassement
  • NF EN ISO 23145-2:2016 Céramiques techniques - Détermination de la masse volumique en vrac des poudres céramiques - Partie 2 : Masse volumique sans tassement
  • NF E75-231-2*NF ISO 9136-2:1999 Abrasive grains - Determination of bulk density - Part 2 : microgrits.
  • NF E75-231-1*NF ISO 9136-1:2005 Abrasive grains - Determination of bulk density - Part 1 : macrogrits.
  • NF EN ISO 29470:2020 Produits isolants thermiques destinés aux applications du bâtiment - Détermination de la masse volumique apparente
  • NF EN 1602:2013 Produits isolants thermiques destinés aux applications du bâtiment - Détermination de la masse volumique apparente
  • NF U42-402:1985 Fertilizers. Determination of bulk density (loose) of fine-grained fertilizers.
  • NF ISO 1306:2005 Ingrédients de mélange du caoutchouc - Noir de carbone (en granules) - Détermination de la masse volumique apparente
  • NF ISO 15100:2001 Plastiques - Fibres de renfort - Fils coupés - Détermination de la masse volumique apparente
  • NF ISO 5017:2013 Produits réfractaires façonnés denses - Détermination de la masse volumique apparente, de la porosité ouverte et de la porosité totale
  • NF EN ISO 3923-1:2018 Poudres métalliques - Détermination de la masse volumique apparente - Partie 1 : méthode de l'entonnoir
  • NF ISO 9136-1:2005 Grains abrasifs - Détermination de la masse volumique apparente - Partie 1 : macrograins
  • NF EN ISO 60:1999 Plastiques - Détermination de la masse volumique apparente des matières susceptibles de s'écouler à travers un entonnoir donné
  • NF Q34-030-3*NF EN ISO 12625-3:2014 Tissue paper and tissue products - Part 3 : determination of thickness, bulking thickness and apparent bulk density and bulk
  • NF EN ISO 61:1999 Matières plastiques - Détermination de la masse volumique apparente des matières à mouler non susceptibles de s'écouler à travers un entonnoir donné
  • NF EN 14617-1:2013 Pierre agglomérée - Méthodes d'essai - Partie 1 : détermination de la masse volumique apparente et du coefficient d'absorption d'eau
  • NF EN 993-1:2018 Méthodes d'essai pour produits réfractaires façonnés denses - Partie 1 : détermination de la masse volumique apparente, de la porosité ouverte et de la porosité totale
  • NF EN 993-18:2002 Méthodes d'essai pour produits réfractaires façonnés denses - Partie 18 : détermination de la masse volumique apparente des matériaux en grains par la méthode à l'eau sous vide
  • NF B42-008:1997 Advanced technical ceramics. Methods of test for ceramic powders. Part 8 : determination of tapped bulk density.
  • NF X31-501:1992 Qualité des sols - Méthodes physiques - Mesure de la masse volumique apparente d'un échantillon de sol non remanié - Méthode du cylindre.
  • NF B42-009:1997 Advanced technical ceramics. Methods of test for ceramic powders. Part 9 : determination of untamped bulk density.
  • NF EN 12697-7:2022 Mélanges bitumineux - Méthodes d'essai - Partie 7 : détermination de la masse volumique apparente des éprouvettes bitumineuses par les rayons gamma

Korean Agency for Technology and Standards (KATS), bulk density bulk density

IN-BIS, bulk density bulk density

Japanese Industrial Standards Committee (JISC), bulk density bulk density

国家市场监督管理总局、中国国家标准化管理委员会, bulk density bulk density

  • GB/T 6286-2021 Determination of bulk density for molecular sieve
  • GB/T 40549-2021 Determination of bulk density of coke in a small container
  • GB/T 40380.1-2021 Metallic powders—Determination of apparent density and flow rate at elevated temperatures—Part 1: Determination of apparent density at elevated temperatures

British Standards Institution (BSI), bulk density bulk density

  • BS ISO 8840:2021 Refractory materials. Determination of bulk density of granular materials (grain density)
  • BS ISO 9136-2:2000 Abrasive grains - Determination of bulk density - Microgrits
  • BS EN 1236:1995 Fertilizers - Determination of bulk density (loose)
  • DD CEN/TS 15401:2010 Solid recovered fuels. Determination of bulk density
  • 21/30395144 DC BS ISO 8840. Refractory materials. Determination of bulk density of granular materials (grain density)
  • BS ISO 8967:2005 Dried milk and dried milk products. Determination of bulk density
  • BS ISO 9136-1:2004 Abrasive grains. Determination of bulk density - Macrogrits
  • BS ISO 1013:2020 Coke. Determination of bulk density in a large container
  • BS EN 15761:2010 Pre-shaped growing media. Determination of length, width height, volume and bulk density
  • BS EN 15761:2009 Pre-shaped growing media - Determination of length, width, height, volume and bulk density
  • DD CEN/TS 15401:2006 Solid recovered fuels — Methods for the determination of bulk density
  • BS ISO 18549-1:2009 Metallic powders - Determination of apparent density and flow rate at elevated temperatures - Determination of apparent density at elevated temperatures
  • 21/30397451 DC BS ISO 567. Coke. Determination of bulk density in a small container
  • BS EN ISO 11272:2017 Tracked Changes. Soil quality. Determination of dry bulk density
  • BS ISO 567:2021 Tracked Changes. Coke. Determination of bulk density in a small container
  • BS EN ISO 10545-3:2018 Tracked Changes. Ceramic tiles. Determination of water absorption, apparent porosity, apparent relative density and bulk density
  • BS EN ISO 12625-3:2014 Tissue paper and tissue products. Determination of thickness, bulking thickness and apparent bulk density and bulk
  • BS EN ISO 23145-1:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of bulk density of ceramic powders. Tap density
  • BS ISO 15100:2000 Plastics. Reinforcement fibres. Chopped strands. Determination of bulk density
  • BS EN ISO 23145-2:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of bulk density of ceramic powders - Untapped density
  • BS 2782-6 Method 621D:1978 Methods of testing plastics. Dimensional properties. Determination of compacted apparent bulk density of PVC resins
  • BS ISO 3852:2007 Iron ores for blast furnace and direct reduction feedstocks. Determination of bulk density
  • BS ISO 20290-1:2021 Aggregates for concrete. Test methods for mechanical and physical properties - Determination of bulk density, particle density, particle mass-per-volume and water absorption
  • BS 6986-2:1988 Analysis of instant tea. Methods for determination of free-flow and compacted bulk densities
  • 21/30436585 DC BS EN 15761. Pre-shaped growing media. Determination of the dimensions measured and bulk density
  • BS EN ISO 787-11:1995 General methods of test for pigments and extenders. Determination of tamped volume and apparent density after tamping
  • BS 1902-3.17:1990 Methods of testing refractory materials - General and textural properties - Determination of volume and bulk density of dense shaped products (methods 1902-317)
  • 19/30373025 DC BS ISO 20290-1. Aggregates for concrete. Test methods for mechanical and physical properties. Part 1. Determination of bulk density, particle density, particle mass-per-volume and water absorption
  • BS 1902 Sec.3.17:1990 Methods of testing refractory materials. General and textural properties. Determination of volume and bulk density of dense shaped products (methods 1902-317)
  • BS 3762-4.2:1986 Analysis of formulated detergents. Physical test methods. Method for determination of apparent bulk density
  • BS EN ISO 7971-3:2019 Tracked Changes. Cereals. Determination of bulk density, called mass per hectolitre. Routine method
  • BS EN 1097-3:1998 Tests for mechanical and physical properties of aggregates - Determination of loose bulk density and voids
  • BS EN 993-1:2018 Tracked Changes. Methods of test for dense shaped refractory products. Determination of bulk density, apparent porosity and true porosity
  • BS EN 12697-7:2022 Tracked Changes. Bituminous mixtures. Test methods. Determination of the bulk density of bituminous specimens by gamma rays
  • 18/30382725 DC BS EN 12697-6. Bituminous mixtures. Test methods. Part 6. Determination of bulk density of bituminous specimens

Group Standards of the People's Republic of China, bulk density bulk density

  • T/CISA 099-2021 Determination of apparent density,bulk density and porosity for iron tailings
  • T/REIANM 0302-2022 Sintered NdFeB alloy powder—Determination of Density Part 1 :Determination of Aerated Bulk density

Professional Standard - Chemical Industry, bulk density bulk density

  • HG/T 4680-2014 Test method for single pellet crush strength of fertilizer catalysts

Professional Standard - Machinery, bulk density bulk density

HU-MSZT, bulk density bulk density

Professional Standard - Ferrous Metallurgy, bulk density bulk density

  • YB/T 187-2001 Method of the test for bulk density of continuous casting mold powder

National Metrological Verification Regulations of the People's Republic of China, bulk density bulk density

National Metrological Technical Specifications of the People's Republic of China, bulk density bulk density

工业和信息化部, bulk density bulk density

  • YB/T 187-2017 Test method for bulk density of continuous casting molding slag

Professional Standard - Nuclear Industry, bulk density bulk density

  • EJ/T 898-2014 Uranium dioxide powder.Determination for apparent density and tap density
  • EJ/T 899-1994 Determination of Bulk Density of Uranium Dioxide Powder by Funnel Method

International Dairy Federation (IDF), bulk density bulk density

  • IDF 134-2005 Dried milk and dried milk products - Determination of bulk density

Military Standard of the People's Republic of China-General Armament Department, bulk density bulk density

  • GJB 772.113-1994 Test methods for explosives - Wet method for determination of bulk density
  • GJB 772.114-1994 Test methods for explosives - Dry method for determination of bulk density
  • GJB 771.101-1989 Gunpowder Performance Test Methods Determination of Bulk Density
  • GJB 8683.5-2015 Test methods for physical parameters of pyrotechnics Part 5: Determination of bulk density using glass measuring cylinder method
  • GJB 8683.4-2015 Test methods for physical parameters of pyrotechnics Part 4: Standard graduated cylinder method for determination of bulk density

国家机械工业局, bulk density bulk density

CEN - European Committee for Standardization, bulk density bulk density

  • PD CEN/TS 15103:2005 Solid biofuels - Methods for the determination of bulk density
  • PD CEN/TS 15401:2006 Solid recovered fuels - Methods for the determination of bulk density
  • PREN 12697-6-2018 Bituminous mixtures - Test methods - Part 6: Determination of bulk density of bituminous specimens

GOSTR, bulk density bulk density

  • GOST 34260-2017 Glass fiber. Chopped strands. Determination of bulk density
  • GOST R 58401.10-2019 Automobile roads of general use. Asphalt mixtures and asphalt concrete for road pavement. Methods for determining of bulk density

ES-UNE, bulk density bulk density

  • UNE-EN ISO 17828:2016 Solid biofuels - Determination of bulk density (ISO 17828:2015)
  • UNE-EN ISO 10545-3:2018 Ceramic tiles - Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density (ISO 10545-3:2018)
  • UNE-EN ISO 23145-1:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of bulk density of ceramic powders - Part 1: Tap density (ISO 23145-1:2007) (Endorsed by AENOR in June of 2016.)
  • UNE-EN ISO 23145-2:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of bulk density of ceramic powders - Part 2: Untapped density (ISO 23145-2:2012) (Endorsed by AENOR in June of 2016.)
  • UNE-EN 12697-6:2022 Bituminous mixtures - Test methods - Part 6: Determination of bulk density of bituminous specimens
  • UNE-EN ISO 7971-3:2019 Cereals - Determination of bulk density, called mass per hectolitre - Part 3: Routine method (ISO 7971-3:2019)
  • UNE-EN 993-1:2018 Methods of test for dense shaped refractory products - Part 1: Determination of bulk density, apparent porosity and true porosity (Endorsed by Asociación Española de Normalización in January of 2019.)
  • UNE-EN 772-4:1999 METHODS OF TEST FOR MASONRY UNITS - PART 4: DETERMINATION OF REAL AND BULK DENSITY AND OF TOTAL AND OPEN POROSITY FOR NATURAL STONE MASONRY UNITS
  • UNE-EN ISO 17892-2:2015 Geotechnical investigation and testing - Laboratory testing of soil - Part 2: Determination of bulk density (ISO 17892-2:2014)
  • UNE-EN 12697-7:2022 Bituminous mixtures - Test methods - Part 7: Determination of the bulk density of bituminous specimens by gamma rays

Indonesia Standards, bulk density bulk density

  • SNI ISO 12625-3:2014 Tissue paper and tissue products — Part 3: Determination of thickness, bulking thickness, apparent bulk density and bulk

Professional Standard - Electron, bulk density bulk density

  • SJ/T 10215-1991 Determination of density for magnetic oxide powders.Determination of apparent density:Oscillating funnel method

KR-KS, bulk density bulk density

  • KS M ISO 12625-3-2016 Tissue paper and tissue products-Part 3:Determination of thickness, bulking thickness and apparent bulk density

Professional Standard - Commodity Inspection, bulk density bulk density

  • SN/T 2712-2010 General method for import and export chemicals.Determination of bulk density

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, bulk density bulk density

  • GJB 5891.2-2006 Test method of loading material for initiating explosive device Part 2: Measurement of bulk density
  • GJB 5382.4-2005 Test methods of physical parameter for pyrotechnic. Part 4: Determination of bulk density. Standard measuring cylinder method
  • GJB 5382.5-2005 Test methods of physical parameter for pyrotechnic. Part 5: Determination of bulk density. Glass measuring cylinder method

The American Road & Transportation Builders Association, bulk density bulk density

  • AASHTO T 275-2007 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Paraffin-Coated Specimens
  • AASHTO T 166-2007 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
  • AASHTO T 19M/T 19-2014 Standard Method of Test for Bulk Density (“Unit Weight”) and Voids in Aggregate
  • AASHTO T 331-2007 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method

Professional Standard - Agriculture, bulk density bulk density

AASHTO - American Association of State Highway and Transportation Officials, bulk density bulk density

  • T 19M/T 19-2009 Standard Method of Test for Bulk Density (“Unit Weight”) and Voids in Aggregate
  • T 19M/T 19-2014 Standard Method of Test for Bulk Density (“Unit Weight”) and Voids in Aggregate

Professional Standard - Military and Civilian Products, bulk density bulk density

  • WJ 2707.3-2008 Test methods for physical and chemical properties of cloud explosives Part 3: Bulk density

CH-SNV, bulk density bulk density

国家能源局, bulk density bulk density

  • SH/T 0958-2017 Determination of bulk density of shaped catalysts and catalyst carriers by mechanical tapping

TR-TSE, bulk density bulk density

  • TS 2415-1976 P L A S T I C S PVC RESINS — DETERMINATION OF COMPACTED APPARENT BULK DENSITY

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, bulk density bulk density

  • GB/T 1479.3-2017 Metallic powders-Determination of apparent density-Part 3: Oscillating funnel method

FI-SFS, bulk density bulk density

AT-ON, bulk density bulk density

  • OENORM EN 12697-7-2021 Bituminous mixtures - Test methods - Part 7: Determination of the bulk density of bituminous specimens by gamma rays




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved