Breaking Strength and Tear Strength

Breaking Strength and Tear Strength, Total:500 items.

In the international standard classification, Breaking Strength and Tear Strength involves: Cellular materials, Rubber, Electromechanical components for electronic and telecommunications equipment, Leather technology, Fishing and fish breeding, Products of the textile industry, Test conditions and procedures in general, Construction materials, Adhesives, Paper and board, Headgear. Clothing accessories. Fastening of clothing, Footwear, Mechanical testing, Insulating materials, Rubber and plastics products, Analytical chemistry, Plastics, Electrical wires and cables, Materials for aerospace construction, Powder metallurgy, Non-textile floor coverings, Testing of metals, Textile fibres, Farming and forestry, Ceramics, Continuous handling equipment, Materials for the reinforcement of composites.

Japanese Industrial Standards Committee (JISC), Breaking Strength and Tear Strength

JIS K 6400-5:2012 Flexible cellular polymeric materials -- Physical properties -- Part 5: Determination of tensile strength, elongation at break and tear strength
JIS K 6400-5:2004 Flexible cellular polymeric materials -- Determination of physical properties -- Part 5: Tensile strength, elongation at break and tear strength
JIS P 8116:1994 Paper and board -- Determination of tearing resistance
JIS P 8116:2022 Paper -- Determination of tearing resistance -- Elmendorf tearing tester method
JIS P 8116:2000 Paper -- Determination of tearing resistance --Elmendorf tearing tester method
JIS K 6274:2006 Rubber and plastics -- Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
JIS K 6274:2018 Rubber and plastics -- Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
JIS A 1509-4:2008 Test methods for ceramic tiles -- Part 4: Determination of modulus of rupture and breaking strength
JIS R 1607:1995 Testing methods for fracture toughness of fine ceramics

RU-GOST R, Breaking Strength and Tear Strength

GOST R 50359-1992 Rubber, vulcanized. Determination of tear strength (throuser, angle and crescent test pieces)
GOST 17316-1971 Artificial leather. Measuring method of tearing load and elongation of break
GOST 938.19-1971 Leather. Method of tear strength testing
GOST R 50203.4-1992 Smallwares. Method for determination of the breaking strength and breaking elongation
GOST 17074-1971 Artificial leather. Method for the determination of tear strength
GOST 26128-1984 Polymer films. Methods of tear resistance determination
GOST ISO 20872-2011 Footwear. Test methods for outsoles. Tear strength
GOST 23016-1978 Rubber. Method for the determination of the tear resistance on test strips
GOST ISO 5626-1997 Paper. Determination of folding endurance (Shopper, Lomarge, Kellers-Molena, MIT methods)
GOST R ISO 2960-1999 Textiles. Determination of bursting strength and bursting distension by diaphragm method
GOST R ISO 3376-2013 Leather. Determination of the tensile strength at break and elongation
GOST 13525.3-1997 Pulp and paper. Method for determination of tearing resistance (Elmendorf method)
GOST R 56284-2014 Artificial leather. Measuring method of tearing load and elongation of break
GOST R ISO 17696-2016 Footwear. Test methods for uppers, lining and insocks. Tear strength
GOST R 53552-2009 Cotton fibre. Method for determination of unit breaking strength
GOST 30304-1995 Fabrics coated with rubber or plastics. Determination of tear resistanse

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Breaking Strength and Tear Strength

IPC TM-650 2.4.17-1973 Tear Strength (Propagation)
IPC TM-650 5.1.420-1975 Analysis of Glass Fabrics for Breaking Strength; (Tentative)

ZA-SANS, Breaking Strength and Tear Strength

SANS 5637:2000 Determination of tearing strength
SANS 1093:2006 Breaking strength and elongation at break (strip method)
SANS 5873:1976 Tear strength of vulcanized rubbers
SANS 5176:2007 Textile fabrics: tearing strength of selvedges
SANS 5328:2004 Tear resistance of textile felts
SANS 5873:2008 Tear strength of vulcanized rubbers
SANS 5652:1972 Determination of split tear strength of elastomeric material
SANS 6132:1989 Wet stitch tear strength of leather welting
SANS 5506:2008 Tear resistance of rubber cable sheathing
SANS 5323:2008 Breaking strength of seams in textiles
SANS 5323:2005 Breaking strength of seams in textiles
SANS 1095:1973 Breaking strength of textile fabrics: grab method
SANS 1092:2007 Breaking strength and extension at break of textile fabrics - Strip method using constant rate of load
SANS 468:2007 Breaking strength and extension at break of textile fabrics: narrow strip method using constant rate of traverse
SANS 5237:2005 Chlorine retention of fabrics: reduction in breaking strength method
SANS 5414:2007 Tensile strength and extension at break: modified (dumb-bell) strip method
SANS 5962:1982 Determination of wet split tear strength of inner sole and runner materials (other than leather)

CH-SNV, Breaking Strength and Tear Strength

SNV 742 401.11-1971 Fiber tear strength

German Institute for Standardization, Breaking Strength and Tear Strength

DIN EN ISO 1805:2007 Fishing nets - Determination of breaking force and knot breaking force of netting yarns (ISO 1805:2006); English version of DIN EN ISO 1805:2007-02
DIN EN 14410:2003-06 Self adhesive tapes - Measurement of breaking strength and elongation at break; German version EN 14410:2003
DIN EN ISO 29864:2019-09 Self adhesive tapes - Measurement of breaking strength and elongation at break (ISO 29864:2018); German version EN ISO 29864:2019
DIN EN 12025:1996 Self adhesive tapes - Measurement of tear resistance by the pendulum; German version EN 12025:1996
DIN EN ISO 1974:2012-09 Paper - Determination of tearing resistance - Elmendorf method (ISO 1974:2012); German version EN ISO 1974:2012
DIN EN 12031:1996 Self adhesive tapes - Measurement of bursting strength; German version EN 12031:1996
DIN EN ISO 10545-4:2019-06 Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength (ISO 10545-4:2019); German version EN ISO 10545-4:2019
DIN EN 12773:2000-01 Footwear - Test methods for outsoles - Needle tear strength; German version EN 12773:1999 / Note: To be replaced by DIN EN ISO 20874 (2016-01).
DIN EN 12771:2000 Footwear - Test methods for outsoles - Tear strength; German version EN 12771:1999
DIN EN ISO 29864:2019 Self adhesive tapes - Measurement of breaking strength and elongation at break (ISO 29864:2018)
DIN VDE 0472-613:1985 Testing of cables, wires and flexible cords; tear resistance
DIN EN 12774:2000-04 Footwear - Test methods for outsoles - Determination of split tear strength and delamination resistance; German version EN 12774:1999 / Note: To be replaced by DIN EN ISO 20875 (2016-01).
DIN EN 12782:2000 Footwear - Test methods for insoles - Resistance to stitch tear; German version EN 12782:1999
DIN EN ISO 8067:2018-12 Flexible cellular polymeric materials - Determination of tear strength (ISO 8067:2018); German version EN ISO 8067:2018
DIN EN ISO 10545-4:2019 Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength (ISO 10545-4:2019)
DIN EN ISO 17696:2018-12 Footwear - Test methods for uppers, lining and insocks - Tear strength (ISO 17696:2004); German version EN ISO 17696:2018
DIN ISO 6133:2004 Rubber and plastics - Analysis of multipeak traces obtained in determination of tear strength and adhesion strength (ISO 6133:1998)
DIN EN ISO 3327:2009-10 Hardmetals - Determination of transverse rupture strength (ISO 3327:2009); German version EN ISO 3327:2009
DIN EN 2262:1995-11 Aerospace series - Silicone rubber (VMQ/PVMQ) with high tear strength - Hardness 50 IRHD; German version EN 2262:1995
DIN EN ISO 505:2000 Conveyor belts - Method for the determination of the tear propagation resistance of textile conveyor belts (ISO 505:1999); German version EN ISO 505:1999
DIN EN 12771:2000-03 Footwear - Test methods for outsoles - Tear strength; German version EN 12771:1999 / Note: To be replaced by DIN EN ISO 20872 (2016-01).

Korean Agency for Technology and Standards (KATS), Breaking Strength and Tear Strength

KS K 0534-2014 Test method for tearing strength of cloth: Wing rip method
KS K 0769-2007(2012) Test method for tearing strength of geotextile
KS F 2127-1994 Testing method for tearing strength of geotextile
KS M ISO 29864:2014 Self adhesive tapes — Measurement of breaking strength and elongation at break
KS M ISO 29864-2014(2019) Self adhesive tapes — Measurement of breaking strength and elongation at break
KS M ISO 29864-2019 Self adhesive tapes — Measurement of breaking strength and elongation at break
KS K 0536-2014 Test method for tearing strength of cloth: Tongue method
KS K 0536-1986 Test method for tearing strength of cloth: Tongue method
KS M ISO 6383-1-2021 Plastics - Film and sheeting - Determination of tear resistance - Part 1 : Trouser tear method
KS M ISO 20872:2020 Footwear — Test methods for outsoles — Tear strength
KS K 0796-2020 Test method for trapezoid tearing strength of geotextiles
KS M ISO 1974:2006 Paper-Determination of tearing resistance(Elmendorf method)
KS M ISO 20874:2020 Footwear — Test methods for outsoles — Needle tear strength
KS M ISO 1974:2014 Paper — Determination of tearing resistance — Elmendorf method
KS K 0796-2015(2020) Test method for trapezoid tearing strength of geotextiles
KS K 0536-2019 Test method for tearing strength of cloth: Tongue method
KS M ISO 8067-2023 Flexible cellular polymeric materials — Determination of tear strength
KS M ISO 20875:2020 Footwear — Test methods for outsoles — Determination of split tear strength and delamination resistance
KS M ISO 20875:2012 Footwear-Test methods for outsoles-Determination of split tear strength and delamination resistance
KS K 0535-2015 Textiles－Tear properties of fabrics－ Part 1: Determination of tear force using ballistic pendulum method (Elmendorf)
KS M ISO 17696-2005(2020) Footwear ― Test methods for uppers, linings and insocks ― tear strength
KS M ISO 4674-1-2022 Rubber- or plastics-coated fabrics — Determination of tear resistance — Part 1: Constant rate of tear methods
KS M ISO 3303:2002 Rubber－or plastics－coated fabrics－Determination of bursting strength
KS M ISO 8067:2008 Flexible cellular polymeric materials－Determination of tear strength
KS M ISO 8067:2018 Flexible cellular polymeric materials — Determination of tear strength
KS M ISO 17696-2020 Footwear ― Test methods for uppers, linings and insocks ― tear strength
KS D ISO 3327:2011 Hardmetals-Determination of transverse rupture strength
KS B 0818-2012 Hardmetals－Determination of transverse rupture strength
KS B 0818-2001(2011) Hardmetals－Determination of transverse rupture strength
KS D ISO 3327-2015 Hardmetals－Determination of transverse rupture strength
KS K 0534-2019 Test method for tearing strength of cloth: Wing rip method
KS K 0743-2016 Test method for breaking strength and elongation of geotextiles：Grab method
KS K 0410-2022 Test method for breaking strength and elongation of cords
KS M ISO 15107-2007(2022) Adhesives－Determination of cleavage strength of bonded joints
KS K 0520-1995 Testing method for breaking strength and elingation of woven cloth

British Standards Institution (BSI), Breaking Strength and Tear Strength

BS EN ISO 1805:2006 Fishing nets - Determination of breaking force and knot breaking force of netting yarns
BS EN ISO 10545-4:2019 Ceramic tiles. Determination of modulus of rupture and breaking strength
BS EN 12031:1997 Self-adhesive tapes - Measurement of bursting strength
BS EN 14410:2003 Self adhesive tapes - Measurement of breaking strength and elongation at break
BS EN ISO 29864:2019 Self adhesive tapes - Measurement of breaking strength and elongation at break
BS ISO 29864:2018 Self adhesive tapes — Measurement of breaking strength and elongation at break
BS EN 2262:1995 Silicone rubber (VMQ/PVMQ) with high tear strength - Hardness 50 IRHD
BS EN 1940:1996 Self adhesive tapes - Measurement of breaking strength
BS EN 12782:2000 Footwear - Test methods for insoles - Resistance to stitch tear
BS EN ISO 8067:2018 Flexible cellular polymeric materials. Determination of tear strength
BS ISO 6133:2015 Rubber and plastics. Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
BS EN ISO 8067:2009 Flexible cellular polymeric materials. Determination of tear strength
BS EN ISO 8067:2008 Flexible cellular polymeric materials - Determination of tear strength
16/30332721 DC BS EN ISO 20872. Footwear. Test methods for outsoles. Tear strength
BS EN 1875-3:1998 Rubber and plastics-coated fabrics - Determination of tear strength - Trapezoidal method
BS EN 12390-6:2000 Testing hardened concrete - Tensile splitting strength of test specimens
BS EN 12390-6:2009 Testing hardened concrete - Tensile splitting strength of test specimens
BS EN 12390-6:2010 Testing hardened concrete. Tensile splitting strength of test specimens
16/30332255 DC BS EN ISO 20874. Footwear. Test methods for outsoles. Needle tear strength
BS ISO 6133:1998 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
16/30332259 DC BS EN ISO 20875. Footwear. Test methods for outsoles. Determination of split tear strength and delamination resistance

Association Francaise de Normalisation, Breaking Strength and Tear Strength

NF EN ISO 1805:2007 Fishing nets - Determination of breaking force and knot breaking force of net threads
NF G07-148:1981 Textiles. Tests for fabrics. Determination of tear strength under live froce. Initiated tear.
NF G07-146:1981 TEXTILES. TESTING WOVEN FABRICS. DETERMINATION OF TEAR STRENGTH ON DYNAMOMETER. INITIATED TEAR.
NF X41-050:2003 Self adhesive tapes - Measurement of breaking strength and elongation at break.
NF G07-147:1981 Textiles. Testing woven fabrics. Determination of tear strength under live force. Nail tear.
NF EN ISO 29864:2019 Self-adhesive tapes - Measuring breaking strength and elongation at break
NF EN ISO 6383-1:2016 Plastics - Film and sheet - Determination of tear resistance - Part 1: pants tearing method
NF P61-534-4*NF EN ISO 10545-4:2019 Ceramic tiles - Part 4 : determination of modulus of rupture and breaking strength
NF G07-145:1981 Textiles. Testing woven fabrics. Determination of tear strength on dynamometer. Nail tear.
NF G07-149:1981 TEXTILES. TESTING WOVEN FABRICS. DETERMINATION OF TEAR STRENGTH UNDER LIVE FORCE. INITIATED TEAR. (LOW CAPACITY DROP HAMMER).
NF G52-004:1976 DETERMINATION OF RESISTANCE OF LEATHER TO TEARING (ON SPECIMEN HAVING A LONGITUDINAL INCISION).
NF T54-140:1984 Plastics. Film and sheeting. Determination of tear resistance. Part 1 : trouser tear method.
NF G62-309*NF EN 12771:2000 Footwear - Test methods for outsoles - Tear strength
NF EN ISO 10545-4:2019 Ceramic tiles and slabs - Part 4: determination of bending strength and breaking force
NF G62-301*NF EN 12774:2000 Footwear - Test methods for outsoles - Determination of split tear strength and delamination resistance
NF EN ISO 5079:2020 Textile fibers - Determination of breaking force and breaking elongation of individual fibers
NF G62-006:1983 FOOTWEAR. RUBBER AND PLASTIC SOLINGS. DETERMINATION OF THE BREAKING STRENGTH AND OF THE ELONGATION AT BREAK.
NF T56-109:2009 Flexible cellular polymeric materials - Determination of tear strength.
NF G62-305*NF EN 12773:2000 Footwear -Test methods for outsoles - Needle tear strength
NF G62-205*NF EN 12782:2000 Footwear - Test methods for insoles - Resistance to stitch tear
NF EN ISO 1974:2012 Paper - Determination of tear resistance - Elmendorf method
NF G62-108:2002 Footwear - Test methods for uppers, lining and insocks - Tear strength.
NF A95-423:1993 Hardmetals. Determination of transverse rupture strength.
NF G07-001:1973 TEXTILES. TESTING WOVEN FABRICS. DETERMINATION OF BREAKING FORCE AND ELONGATION AT TENSILE BREAK. (TEST ON UNRAVELLED OR CUT STRIP). SIMPLIFIED METHOD.
NF T56-109:1995 Flexible cellular polymeric materials. Determination of tear strength.
NF T56-109*NF EN ISO 8067:2018 Flexible cellular polymeric materials - Determination of tear strength
NF EN ISO 8067:2018 Flexible cellular polymer materials - Determination of tear resistance
NF P61-354-4:2012 Ceramic tiles - Part 4 : determination of modulus of rupture and breaking strength.
NF P61-534-4:2014 Ceramic tiles - Part 4 : determination of modulus of rupture and breaking strength
NF P61-537:1997 Ceramic tiles. Part 4 : determination of modulus of rupture and breaking strength.
NF G62-131*NF EN ISO 17696:2018 Footwear - Test methods for uppers, linings and insocks - Tear strength
NF T46-055:2005 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength.
NF ISO 6133:2015 Rubber and plastics - Analysis of multi-peak plots obtained during determinations of tear resistance and adhesion force
NF A95-423*NF EN ISO 3327:2009 Hardmetals - Determination of transverse rupture strength
NF ISO 4606:1996 Textile glass - Fabrics - Determination of tensile breaking force and elongation at break using the strip method
NF T46-033:1977 VULCANIZED RUBBERS-DETERMINATION OF TEARSTRENGTH OF SMALL TEST PIECES(DELFT TEST PIECES).
NF T46-055*NF ISO 6133:2015 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
NF A03-183:1987 Iron and steel - Mechanics of fracture - Determination from curve J-△a of the conventional characteristic values J and dJ/da of the ductile tear strength
NF L17-250-6*NF EN 2262:1996 Aerospace series. Silicone rubber (vmq/pvmq) with high tear strenght. Hardness 50 irhd.
NF T47-126:2000 Conveyor belts - Method for the determination of the tear propagation resistance of textile conveyor belts.
NF EN 12782:2000 Footwear - Test methods applicable to insoles - Resistance to tearing of stitches
NF EN ISO 17706:2018 Footwear - Upper testing methods - Breaking strength and elongation

Canadian General Standards Board （CGSB), Breaking Strength and Tear Strength

CAN/CGSB-4.2 NO.12.1-2016 Textile test methods Tearing strength - Single-rip method
CAN/CGSB-4.2 NO.12.2-2012 Textile test methods Tearing strength - Trapezoid method
CGSB 4.2 NO. 12.2-95-CAN/CGSB AMD 1-2000 Textile Test Methods Tearing Strength - Trapezoid Method
CGSB 40-GP-1M METH 5-1978 Methods of Sampling and Testing Cordage Breaking Strength

SCC, Breaking Strength and Tear Strength

CAN/CGSB-4.2 No. 12.1-2016 Textile test methodsTearing strength – Single-rip method
CAN/CGSB-4.2 No./No.12.1-M90-1990 Textile testing methods: Tear strength - Single tear method
CAN/CGSB-4.2 Nº 12.1-2016 Textile testing methodsTear strength — Single tear method
BS EN ISO 6383-1:2004 Plastics. Film and sheeting. Determination of tear resistance-Trouser tear method
BS EN ISO 10545-4:1997 Ceramic tiles-Determination of modulus of rupture and breaking strength
DANSK DS/ISO 29864:2018 Self adhesive tapes – Measurement of breaking strength and elongation at break
DANSK DS/EN 14410:2003 Self adhesive tapes – Measurement of breaking strength and elongation at break
NS-EN 14410:2003 Self adhesive tapes — Measurement of breaking strength and elongation at break
NS-EN 12771:1999 Footwear — Test methods for outsoles — Tear strength
DANSK DS/EN 12771:2000 Footwear - Test methods for outsoles - Tear strength
DANSK DS/EN ISO 6383-1:2016 Plastics - Film and sheeting - Determination of tear resistance - Part 1: Trouser tear method
NS-EN 12773:1999 Footwear — Test methods for outsoles — Needle tear strength
UNE 53234:2002 Plastics. Cellular polymeric flexible materials. Determination of tear strength. Radial tear method.
CAN/CGSB 4.2 No.9.3-M90-1990 Textile testing methods - Breaking strength of high strength fabrics - Principle of constant time breaking
NS-EN ISO 13937-2:2000 Textiles — Tear properties of fabrics — Part 2: Determination of tear force of trouser-shaped test specimens (Single tear method) (ISO 13937-2:2000)
NS-EN ISO 29864:2019 Self adhesive tapes — Measurement of breaking strength and elongation at break (ISO 29864:2018)
DANSK DS/EN ISO 29864:2019 Self adhesive tapes – Measurement of breaking strength and elongation at break (ISO 29864:2018)
CAN/CGSB-4.2 No 12.2-2012 Textile testing methods Tear strength - Trapezoidal method
CAN/CGSB-4.2 No.12.2-1995 Textile testing methods - Tear resistance - Trapezoidal method
CAN/CGSB-4.2 No. 12.2-2012 Textile test methods Tearing strength — Trapezoid method
CAN/CGSB-4.2 No./No.12.2-M90-1990 Textile Test Methods Tearing Strength - Trapezoid Method
CAN/CGSB 4.2 No.12.2-2012 Textile Test Methods - Tearing Strength - Trapezoid Method
DANSK DS/EN 12773:2000 Footwear - Test methods for outsoles - Needle tear strength
NS-EN 12774:1999 Footwear — Test methods for outsoles — Determination of split tear strength and delamination resistance
DANSK DS/EN 12774:2000 Footwear - Test methods for outsoles - Determination of split tear strength and delamination resistance
NS-EN 1940:1996 Self adhesive tapes — Measurement of breaking strength
NS-EN ISO 1974:2012 Paper — Determination of tearing resistance — Elmendorf method (ISO 1974:2012)
DANSK DS/EN 12025:1996 Self adhesive tape - Measurement of tear resistance by the pendulum
BS EN 21974:1994 Paper. Determination of tearing resistance (Elmendorf method)
DIN EN ISO 29864 E:2019 Draft Document - Self adhesive tapes - Measurement of breaking strength and elongation at break (ISO 29864:2018); German and English version prEN ISO 29864:2018
NS-EN ISO 10545-4:2019 Ceramic tiles — Part 4: Determination of modulus of rupture and breaking strength (ISO 10545-4:2019)
DANSK DS/EN ISO 10545-4:2019 Ceramic tiles – Part 4: Determination of modulus of rupture and breaking strength (ISO 10545-4:2019)
NS-EN ISO 10545-4:2014 Ceramic tiles — Part 4: Determination of modulus of rupture and breaking strength (ISO 10545-4:2014)
UNE-EN ISO 10545-4:1997 CERAMIC TILES. PART 4: DETERMINATION OF MODULUS OF RUPTURE AND BREAKING STRENGTH. (ISO 10545-4:1994).
NS-EN ISO 10545-4:1997 Ceramic tiles — Part 4: Determination of modulus of rupture and breaking strength (ISO 10545-4:1994)
NS-EN ISO 10545-4:2012 Ceramic tiles — Part 4: Determination of modulus of rupture and breaking strength (ISO 10545-4:2004)
DANSK DS/EN ISO 1805:2007 Fishing nets - Determination of breaking force and knot breaking force of netting yarns
DANSK DS/EN ISO 1974:2012 Paper - Determination of tearing resistance - Elmendorf method
BS EN ISO 8067:1995 Flexible cellular polymeric materials. Determination of tear strength
NS-EN 13571:2001 Footwear — Test methods for uppers, lining and insocks — Tear strength
DANSK DS/EN 13571:2002 Footwear – Test methods for uppers, lining and insocks – Tear strength
DANSK DS/EN 13571/AC:2004 Footwear – Test methods for uppers, lining and insocks – Tear strength
DANSK DS/EN ISO 3327:2009 Hardmetals - Determination of transverse rupture strength
AENOR UNE-EN ISO 5079:2021 Textile fibers - Determination of breaking strength and elongation at break of individual fibers (ISO 5079:2020)
NS-EN 2262:1995 Aerospace series — Silicone rubber (VMQ/PVMQ) with high tear strength — Hardness 50 IRHD
DANSK DS/EN 2262:1995 Aerospace series - Silicone rubber (VMQ/PVMQ) with high tear strength - Hardness 50 IRHD
DIN EN ISO 10545-4 E:2013 Draft Document - Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength (ISO/DIS 10545-4:2013); German version prEN ISO 10545-4:2013
NS-EN ISO 8067:2018 Flexible cellular polymeric materials — Determination of tear strength (ISO 8067:2018)
DANSK DS/EN ISO 8067:2018 Flexible cellular polymeric materials – Determination of tear strength (ISO 8067:2018)
DIN EN ISO 20872 E:2016 Draft Document - Footwear - Test methods for outsoles - Tear strength (ISO/DIS 20872:2016); German and English version prEN ISO 20872:2016
NS-EN ISO 8067:2008 Flexible cellular polymeric materials — Determination of tear strength (ISO 8067:2008)
NS-EN ISO 8067:1995 Flexible cellular polymeric materials — Determination of tear strenght (ISO 8067:1989)

American Society for Testing and Materials (ASTM), Breaking Strength and Tear Strength

ASTM D4704-13(2023) Standard Test Method for Tearing Strength, Tongue Tear of Leather
ASTM D4704-00(2005) Standard Test Method for Tearing Strength, Tongue Tear of Leather
ASTM D4704-00 Standard Test Method for Tearing Strength, Tongue Tear of Leather
ASTM D5587-96 Standard Test Method for Tearing Strength of Fabrics by Trapezoid Procedure
ASTM D5587-07ae1 Standard Test Method for Tearing Strength of Fabrics by Trapezoid Procedure
ASTM D5587-15(2019) Standard Test Method for Tearing Strength of Fabrics by Trapezoid Procedure
ASTM D4704-13(2017) Standard Test Method for Tearing Strength, Tongue Tear of Leather
ASTM D1004-07 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting
ASTM D4704-12 Standard Test Method for Tearing Strength, Tongue Tear of Leather
ASTM D4704-13 Standard Test Method for Tearing Strength, Tongue Tear of Leather
ASTM D5734-95(2001) Standard Test Method for Tearing Strength of Nonwoven Fabrics by Falling-Pendulum (Elmendorf) Apparatus
ASTM D6077-00 Standard Test Method for Trapezoid Tearing Strength of Leather
ASTM D6077-00(2005) Standard Test Method for Trapezoid Tearing Strength of Leather
ASTM D4831-00 Standard Test Method for Buckle Tear Strength of Leather
ASTM D4786-00 Standard Test Method for Stitch Tear Strength, Single Hole
ASTM D4786-00(2016) Standard Test Method for Stitch Tear Strength, Single Hole
ASTM D4831-00(2020) Standard Test Method for Buckle Tear Strength of Leather
ASTM D4786-00(2020) Standard Test Method for Stitch Tear Strength, Single Hole
ASTM D6077-16(2023) Standard Test Method for Trapezoid Tearing Strength of Leather
ASTM D4831-00(2016) Standard Test Method for Buckle Tear Strength of Leather
ASTM D6077-16 Standard Test Method for Trapezoid Tearing Strength of Leather
ASTM C648-20 Standard Test Method for Breaking Strength of Ceramic Tile
ASTM D5884-04a Standard Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes
ASTM D5884-04 Standard Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes
ASTM D5884/D5884M-04A(2015)e1 Standard Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes
ASTM D5884/D5884M-23 Standard Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes
ASTM D6077-10 Standard Test Method for Trapezoid Tearing Strength of Leather
ASTM D1578-93(2006)e1 Standard Test Method for Breaking Strength of Yarn in Skein Form
ASTM D4073-06 Standard Test Method for Tensile-Tear Strength of Bituminuous Roofing Membranes
ASTM D4705-00(2010) Standard Test Method for Stitch Tear Strength of Leather, Double Hole
ASTM D4705-00 Standard Test Method for Stitch Tear Strength of Leather, Double Hole
ASTM D4705-18 Standard Test Method for Stitch Tear Strength of Leather, Double Hole
ASTM D4705-18(2023) Standard Test Method for Stitch Tear Strength of Leather, Double Hole
ASTM D4705-12 Standard Test Method for Stitch Tear Strength of Leather, Double Hole
ASTM D4533/D4533M-15(2023) Standard Test Method for Trapezoid Tearing Strength of Geotextiles
ASTM D4705-13 Standard Test Method for Stitch Tear Strength of Leather, Double Hole
ASTM C648-98 Standard Test Method for Breaking Strength of Ceramic Tile
ASTM D2261-96 Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)
ASTM D2261-96(2002) Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)
ASTM D2261-07ae1 Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)
ASTM D3759/D3759M-05(2011) Standard Test Method for Breaking Strength and Elongation of Pressure-Sensitive Tape
ASTM D1004-94a Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting
ASTM D1004-13 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting
ASTM D1004-09 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting
ASTM D5884-99 Standard Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes
ASTM D5884-01 Standard Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes

CZ-CSN, Breaking Strength and Tear Strength

CSN 62 1459-1985 Rubber. Determination of tear strength
CSN 80 0810-1983 Determination of tearing strength and extension of knitted fabrics and articles
CSN ISO 2758:1993 Paper. Determination of bursting strength
CSN 80 6130-1992 Geotextiles. Determination of tensile strenght and breaking elongation

Taiwan Provincial Standard of the People's Republic of China, Breaking Strength and Tear Strength

CNS 1279-1981 Method of Test for Tearing Strength of Leather
CNS 3559-1985 Methods of Test for Tear Resistance of Vulcanized Rubber
CNS 13299-1993 Method of Test for Trapezoid Tearing Strength of Geotextiles
CNS 1355-1999 Method of test for tearing strength of paper and paperboard (Elmendr of tester)
CNS 13787-1996 Methods of Test for Tear Resistance of Plastic Films and Sheets
CNS 3559-2007 Methods of test for tear strength of rubber, vulcanized or thermoplastic

European Committee for Standardization (CEN), Breaking Strength and Tear Strength

EN ISO 1805:2006 Fishing nets - Determination of breaking force and knot breaking force of netting yarns
EN 12242:1999 Touch and close fasteners - Determination of peel strength
EN 14410:2003 Self adhesive tapes - Measurement of breaking strength and elongation at break
EN 12771:1999 Footwear - Test Methods for Outsoles - Tear Strength
EN 12774:1999 Footwear - Test Methods for Outsoles - Determination of Split Tear Strength and Delamination Resistance
EN ISO 8067:2018 Flexible cellular polymeric materials - Determination of tear strength
EN ISO 8067:2008 Flexible cellular polymeric materials - Determination of tear strength
EN 2262:1995 Aerospace series - Silicone rubber (VMQ/PVMQ) with high tear strength - Hardness 50 IRHD
EN ISO 505:2017 Conveyor belts - Method for the determination of the tear propagation resistance of textile conveyor belts

VN-TCVN, Breaking Strength and Tear Strength

TCVN 4639-1988 Artificial leather.Determination of tear resistance
TCVN 3229-2015 Paper - Determination of tearing resistance - Elmendorf method
TCVN 2376-1987 Raw silk.Method for determination of breaking strength and breaking elongation

Indonesia Standards, Breaking Strength and Tear Strength

SNI 06-4997-1999 Determination of tear strength of vulcanized rubber (Delft test pieces)
SNI ISO 20872:2011 Footwear - Test methods for outsoles - Tear strength
SNI ISO 17696:2011 Footwear - Test methods for uppers, linings and insocks - Tear strength

SE-SIS, Breaking Strength and Tear Strength

SIS 25 12 31-1970 Textiles. Determination of tearing strength
SIS PR 20 04 03 experiment method. Tear strength of gypsum foil
SIS SS 16 92 16-1979 Flexible cellular materials — Determination of tear resistance
SIS SS 24 21 23-1982 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
SIS SS 24 21 21-1980 Fabrics coated with rubber or plastics - Determination of breaking strength and elongation at break
SIS SS 25 12 67-1977 Textiles — Woven fabrics — Determination of breaking strength and elongation (Strip method)
SIS PR 20 04 04 experiment method. Tear strength of plastic fiber cages
SIS SS 24 10 22-1982 Plastics - Film and sheeting - Determination of tear resistance - Trouser shaped test piece
SIS 11 26 18-1974 Hardmetals. Determination of transverse rupture strength
SIS SS 24 21 22-1980 Fabrics coated with rubber or plastics — Determination of tear resistance
SIS 25 12 32-1973 Textiles. Determination of tear resistance by Elmendorf pendulum apparatus
SIS SS 24 10 23-1984 Plastics - Film and sheeting - Determination of tear resistance - Elmendorf method

HU-MSZT, Breaking Strength and Tear Strength

MSZ 5367-1971 Paper testing. tear strength definition
MSZ 105/31-1982 Strength testing and fracture testing of metals and alloys

RO-ASRO, Breaking Strength and Tear Strength

STAS 12971-1991 Plastic film and sheets Determination of tesr resistance Trouser tear method
STAS 8994/4-1980 ARTIFICIAL LEATHER Determination of tear resistance
STAS 6127-1987 PLASTICS Tear strength determinatiQn of plastic flexible sheets
STAS 6144-1986 Woven fabric s DETERMINAT ION OF RESIS TANCE TO TEARING BY WING-RIP TECHNIQUE
STAS 9760-1984 TESTINGS OF METALS Determination of breaking tenacity under plane breaking strain conditions K10 METHOD
STAS SR ISO 9290:1995 Textiles. Woven fabrics - Determination of tear resistance by the falling pendulum method

PL-PKN, Breaking Strength and Tear Strength

PN C04254-1986 Rubber, vulcanized Determination of tear strenght
PN P04884-04-1987 Medical knitted articles Blood vessel prosthesis Determination of breaking strength and breaking alongation
PN E04160 ArkusZ20-1973 Elec?ric cables Me?hods ot ?es?ing Determination ot tear strenght
PN P04930-07-1993 Wool. Determination of tensile breaking strength and elongation at rupture for fibres
PN C89073-1963 Plastics. Determination of tear strength of non rigid cellular niaterials

国家市场监督管理总局、中国国家标准化管理委员会, Breaking Strength and Tear Strength

GB/T 36878-2018 Determination of tear resistance for sealant
GB/T 3903.12-2021 Footwear—Test methods for outsoles—Tear strength
GB/T 39039-2020 Evaluation method for hydrogen-induced delayed fracture of high strength steels

GSO, Breaking Strength and Tear Strength

GSO ISO 20872:2013 Footwear -- Test methods for outsoles -- Tear strength
GSO ISO 29864:2015 Self adhesive tapes - Measurement of breaking strength and elongation at break
BH GSO ISO 29864:2017 Self adhesive tapes - Measurement of breaking strength and elongation at break
OS GSO ISO 29864:2015 Self adhesive tapes - Measurement of breaking strength and elongation at break
GSO ISO 20874:2013 Footwear -- Test methods for outsoles -- Needle tear strength
OS GSO ISO 20872:2013 Footwear -- Test methods for outsoles -- Tear strength
GSO ISO 10545-4:2023 Ceramic tiles — Part 4: Determination of modulus of rupture and breaking strength
GSO ISO 13937-2:2012 Textiles -- Tear properties of fabrics -- Part 2: Determination of tear force of trouser-shaped test specimens (Single tear method)
GSO ISO 13937-3:2012 Textiles - Tear properties of fabrics - Part 3 : Determination of tear force of wing-shaped test specimens (Single tear method)
GSO ISO 6383-1:2013 Plastics - Film and sheeting - Determination of tear resistance - Part 1: Trouser tear method
GSO ISO 13937-4:2012 Textiles - Tear properties of fabrics - Part 4 : Determination of tear force of tongue-shaped test specimens (Double tear test)
GSO ISO 20875:2013 Footwear -- Test methods for outsoles -- Determination of split tear strength and delamination resistance
OS GSO ISO 20875:2013 Footwear -- Test methods for outsoles -- Determination of split tear strength and delamination resistance
GSO ISO 1974:2016 Paper -- Determination of tearing resistance -- Elmendorf method
BH GSO ISO 1974:2017 Paper -- Determination of tearing resistance -- Elmendorf method
GSO ISO 13937-1:2013 Textiles -- Tear properties of fabrics -- Part 1: Determination of tear force using ballistic pendulum method (Elmendorf)
GSO ISO 4674-1:2014 Rubber- or plastics-coated fabrics -- Determination of tear resistance -- Part 1: Constant rate of tear methods
GSO ISO 17696:2008 Footwear - Test methods for uppers, linings and insocks – Tear strength
OS GSO ISO 6133:2015 Rubber and plastics -- Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
BH GSO ISO 6133:2016 Rubber and plastics -- Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
OS GSO ISO 1805:2015 Fishing nets -- Determination of breaking force and knot breaking force of netting yarns
BH GSO ISO 1805:2016 Fishing nets -- Determination of breaking force and knot breaking force of netting yarns
OS GSO ISO 8067:2013 Flexible cellular polymeric materials -- Determination of tear strength
GSO ISO 8067:2013 Flexible cellular polymeric materials -- Determination of tear strength
BH GSO ISO 8067:2016 Flexible cellular polymeric materials -- Determination of tear strength
OS GSO ISO 17696:2008 Footwear - Test methods for uppers, linings and insocks – Tear strength
OS GSO ISO 4674-1:2014 Rubber- or plastics-coated fabrics -- Determination of tear resistance -- Part 1: Constant rate of tear methods
BH GSO ISO 4674-1:2016 Rubber- or plastics-coated fabrics -- Determination of tear resistance -- Part 1: Constant rate of tear methods
OS GSO ISO 3327:2015 Hardmetals -- Determination of transverse rupture strength
BH GSO ISO 3327:2017 Hardmetals -- Determination of transverse rupture strength
GSO ASTM D4705:2021 Standard Test Method for Stitch Tear Strength of Leather, Double Hole
BH GSO ASTM D4705:2022 Standard Test Method for Stitch Tear Strength of Leather, Double Hole

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Breaking Strength and Tear Strength

GB/T 33429-2016 Silicone rubber compunds.High tear strength type and high tensile strength type
GB/T 3903.12-2005 Footwear-Test methods for outsoles-Tear streagh
GB/T 17928-1999 Leather--Determination of the stitch tear resistance
GB/T 3903.29-2022 Footwear—Test methods for outsoles—Determination of split tear strength and delamination resistance
GB/T 12833-2006 Rubber and plastics. Analysis of multipeak traces obtained in determinations of tear strength and adhesion strength
GB/T 10808-2006 Flexible cellular polymeric materials.Determination of tear strength
GB/T 17928-2023 Determination of pinhole tear strength for physical and mechanical tests of leather
GB/T 27629-2011 Determination of breaking tenacity of animal fibre bundles
GB 5886-1986 Test method for breaking strength of ramie single fiber
GB 5882-1986 Test method for breaking strength of ramie bundle fibers
GB/T 13835.5-2009 Test method for rabbit hair.Part 5:Breaking tenacity and elongation at break of single fibre
GB/T 13783-1992 Cotton fibres--Determination of breaking tenacity of flat bundles
GB/T 3851-2015 Hardmetals.Determination of transverse rupture strength
GB/T 3903.29-2008 Footwear.Test methods for outsoles.Split tear strength and delamination resistance

CEN - European Committee for Standardization, Breaking Strength and Tear Strength

EN ISO 29864:2019 Self adhesive tapes - Measurement of breaking strength and elongation at break
EN ISO 3327:2009 Hardmetals - Determination of transverse rupture strength

International Organization for Standardization (ISO), Breaking Strength and Tear Strength

ISO 29864:2007 Self adhesive tapes - Measurement of breaking strength and elongation at break
ISO 29864:2018 Self adhesive tapes - Measurement of breaking strength and elongation at break
ISO 10545-4:2019 Ceramic tiles — Part 4: Determination of modulus of rupture and breaking strength
ISO 20872:2018 Footwear - Test methods for outsoles - Tear strength
ISO 20872:2001 Footwear - Test methods for outsoles - Tear strengh
ISO 20874:2001 Footwear - Test methods for outsoles - Needle tear strength
ISO 20874:2018 Footwear - Test methods for outsoles - Needle tear strength
ISO 1421:1977 Fabrics coated with rubber or plastics; Determination of breaking strength and elongation at break
ISO 8067:2008 Flexible cellular polymeric materials - Determination of tear strength
ISO 8067:2018 Flexible cellular polymeric materials - Determination of tear strength
ISO 8067:1989 Flexible cellular polymeric materials; determination of tear strength
ISO 1805:1973 Fishing nets; Determination of breaking load and knot breaking load of netting yarns
ISO 3303:1990 Rubber- or plastics-coated fabrics; determination of bursting strength
ISO 6133:2015 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
ISO 6133:1998 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
ISO 2473:1972 Ebonite — Determination of cross-breaking strength
ISO 3327:1975 Title missing - Legacy paper document
ISO 3327:2009 Hardmetals - Determination of transverse rupture strength
ISO 3327:1982 Hardmetals; Determination of transverse rupture strength
ISO 6133:1981 Rubber and plastics; Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
ISO 505:1999 Conveyor belts - Method for the determination of the tear propagation resistance of textile conveyor belts
ISO 505:2017 Conveyor belts - Method for the determination of the tear propagation resistance of textile conveyor belts

Danish Standards Foundation, Breaking Strength and Tear Strength

DS/EN 14410:2003 Self adhesive tapes - Measurement of breaking strength and elongation at break
DS/EN ISO 10545-4:2012 Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength
DS/EN ISO 6383-1:2004 Plastics - Film and sheeting - Determination of tear resistance - Part 1: Trouser tear method
DS/EN 12771:2000 Footwear - Test methods for outsoles - Tear strength
DS 1097.9:1982 Floorings. Tensile strength and elongation at rupture
DS/EN 12773:2000 Footwear - Test methods for outsoles - Needle tear strength
DS/EN ISO 1974:2012 Paper - Determination of tearing resistance - Elmendorf method
DS/EN ISO 1805:2007 Fishing nets - Determination of breaking force and knot breaking force of netting yarns
DS/EN ISO 8067:2009 Flexible cellular polymeric materials - Determination of tear strength
DS/EN 13571/AC:2004 Footwear - Test methods for uppers, lining and insocks - Tear strength
DS/EN 13571:2002 Footwear - Test methods for uppers, lining and insocks - Tear strength
DS/EN 23327:1994 Hardmetals. Determination of transverse rupture strength
DS/EN ISO 3327:2009 Hardmetals - Determination of transverse rupture strength
DS/EN 2262:1996 Aerospace series - Silicone rubber (VMQ/PVMQ) with high tear strength - Hardness 50 IRHD
DS/ISO 6133:1981 Rubber and plastics. Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength

Lithuanian Standards Office , Breaking Strength and Tear Strength

LST EN 14410-2003 Self adhesive tapes - Measurement of breaking strength and elongation at break
LST EN 12771-2002 Footwear - Test methods for outsoles - Tear strength
LST EN 12773-2001 Footwear - Test methods for outsoles - Needle tear strength
LST EN ISO 10545-4:2012 Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength (ISO 10545-4:2004)
LST EN 13571-2002 Footwear - Test methods for uppers, lining and insocks - Tear strength
LST EN 13571-2002/AC-2005 Footwear - Test methods for uppers, lining and insocks - Tear strength
LST EN 2262-2001 Aerospace series - Silicone rubber (VMQ/PVMQ) with high tear strength - Hardness 50 IRHD
LST EN ISO 1805:2007 Fishing nets - Determination of breaking force and knot breaking force of netting yarns (ISO 1805:2006)
LST EN ISO 8067:2009 Flexible cellular polymeric materials - Determination of tear strength (ISO 8067:2008)

AENOR, Breaking Strength and Tear Strength

UNE-EN 14410:2003 Self adhesive tapes - Measurement of breaking strength and elongation at break
UNE-EN 12771:2000 FOOTWEAR - TEST METHODS FOR OUTSOLES - TEAR STRENGTH
UNE 53612:1984 RUBBER-ANALYSIS OF MULTI-PEAK TRACES OBTAINED IN DETERMINATIONS OF TEAR STRENGTH AND ADHESION STRENGTH
UNE-EN 12773:2000 FOOTWEAR - TEST METHODS FOR OUTSOLES - NEEDLE TEAR STRENGTH
UNE 40413:2002 Textiles. Fabric tear strengt by punching elements.
UNE-EN ISO 10545-4:2015 Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength (ISO 10545-4:2014)
UNE-EN 13571:2002 Footwear - Test methods for uppers, lining and insocks - Tear strength.
UNE 40247-1:1974 IN COTTON FIBRES. DETERMINATION OF BREAKING TENACITY OF FLAT BUNDLES.
UNE-EN ISO 1805:2007 Fishing nets - Determination of breaking force and knot breaking force of netting yarns (ISO 1805:2006)
UNE-EN 2262:1996 AEROSPACE SERIES. SILICONE RUBBER (VMQ/PVMQ) WITH HIGH TEAR STRENGTH. HARDNESS 50 IRHD.
UNE-EN ISO 8067:2009 Flexible cellular polymeric materials - Determination of tear strength (ISO 8067:2008)

Standard Association of Australia （SAA）, Breaking Strength and Tear Strength

AS ISO 10545.4:2020 Ceramic tiles, Method 4: Determination of modulus of rupture and breaking strength
AS/NZS 4275.2:1995 Methods of testing underground marking tape - Tear resistance
AS 4878.7:2001 Methods of test for coated fabrics - Determination of tear resistance
AS 3706.3:2012 Test methods for geotextiles Determination of tear strength Trapezoidal method
AS 2282.7:1999 Methods for testing flexible cellular polyurethane - Determination of tear resistance

ES-UNE, Breaking Strength and Tear Strength

UNE-EN ISO 29864:2020 Self adhesive tapes - Measurement of breaking strength and elongation at break (ISO 29864:2018)
UNE-EN ISO 10545-4:2019 Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength (ISO 10545-4:2019)
UNE-EN ISO 8067:2019 Flexible cellular polymeric materials - Determination of tear strength (ISO 8067:2018)
UNE-ISO 6133:2022 Rubber and plastics. Analysis of multi-peak traces obtained of determinations of tear strength and adhesion strength
UNE-EN ISO 17696:2019 Footwear - Test methods for uppers, linings and insocks - Tear strength (ISO 17696:2004)

IPC - Association Connecting Electronics Industries, Breaking Strength and Tear Strength

IPC TM-650 2.4.16B-2014 Initiation Tear Strength@ Flexible Insulating Materials
IPC TM-650 2.4.16A-1982 Initiation Tear Strength@ Flexible Insulating Materials
IPC TM-650 2.4.17.1A-1982 Propagation Tear Strength@ Flexible Insulating Material
IPC TM-650 2.4.17.1B-2013 Propagation Tear Strength@ Flexible Insulating Material

CU-NC, Breaking Strength and Tear Strength

NC 41-32-3-1985 Leather. Conglomerate Determination of Breakíng Elongation and Tensile Strength
NC 40-73-1985 Textiles. Determination of Puli B reaking Strength and Elongation of Fibres. Testing Methods

YU-JUS, Breaking Strength and Tear Strength

JUS G.S2.030-1987 Testing of leather. Determination of stitch tear force
JUS H.K8.024-1979 Wood adhesives testing methods. Determination ofshear strenght
JUS G.S2.152-1985 Rubber and plastics. Analysis of multi-peak traces obtained in determination of tear strength and adhesion strength

KR-KS, Breaking Strength and Tear Strength

KS M ISO 20872-2020 Footwear — Test methods for outsoles — Tear strength
KS M ISO 20874-2020 Footwear — Test methods for outsoles — Needle tear strength
KS M ISO 20875-2020 Footwear — Test methods for outsoles — Determination of split tear strength and delamination resistance
KS M ISO 8067-2018 Flexible cellular polymeric materials — Determination of tear strength
KS D ISO 3327-2011 Hardmetals－Determination of transverse rupture strength

未注明发布机构, Breaking Strength and Tear Strength

DIN EN ISO 29864 E:2019-01 Measurement of breaking strength and elongation at break of self-adhesive tapes (draft)
ASTM RR-D13-1119 2004 D5587-Test Method for Tearing Strength of Fabrics by Trapezoid Procedure
ASTM RR-D35-1022 2015 D4533-Standard Test Method for Trapezoid Tearing Strength of Geotextiles
DIN ISO 6133 E:2016-09 Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
DIN EN ISO 8067 E:2017-07 Determination of tear strength of flexible cellular polymeric materials (draft)
ASTM RR-D13-1108 2003 D2261-Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)
DIN EN ISO 17696 E:2018-04 Test methods for footwear uppers, linings and insoles - Tear strength (draft)

SAE - SAE International, Breaking Strength and Tear Strength

SAE AMS3802C-1969 CLOTH@ AIRPLANE@ COTTON@ MERCERIZED 50 1b Breaking Strength
SAE AMS3802A-1946 Cloth; Airplane@ Cotton@ Mercerized 50 1bs. Breaking Strength
SAE AMS3802B-1954 Cloth@ Airplane@ Cotton@ Mercerized 50 1b Breaking Strenght
SAE AMS3806D-1988 CLOTH@ AIRPLANE@ COTTON@ MERCERIZED 80 1b (355 N) Breaking Strength
SAE AMS3802D-1984 Cloth@ Airplane@ Cotton@ Mercerized 50 1b (220 N) Breaking Strenght
SAE AMS3802F-2016 Cloth@ Airplane@ Cotton@ Mercerized 50 Pounds (220 N) Breaking Strength
SAE AMS3804E-2016 Cloth@ Airplane@ Cotton@ Mercerized 65 Pounds (290 N) Breaking Strength
SAE AMS3777/5B-1995 TAPE@ NYLON@ NONMELTING@ REINFORCING 1 (25) WIDE@ (2335 N) BREAKING STRENGTH

GM North America, Breaking Strength and Tear Strength

GM GM9149P-1988 Stitch Tear Resistance of Vinyl Coated Genuine Leather

Professional Standard - Chemical Industry, Breaking Strength and Tear Strength

HG/T 2726-1995 Test method for tear strength of microporous sole materials

TR-TSE, Breaking Strength and Tear Strength

TS 1619-1974 SEAM BREAKING STRENGTH OF WOVEN TEXTILE FABRICS
TS 2150-1975 BREAKING STRENGTH AND ELONGATION OF TEXTILE FABRICS : GRAB METHOD
TS 253-1965 METHOD OF DETERMIN?NG THE WEFT AND WARP BREAKING STRENGTH OF THE CLOTH
TS 1998-1975 TEARING STRENGTH OF WOVEN FABRICS BY THE TONGUE (SINGLE RIP) METHOD (CONSTANT — RATE — OF — EXTENSION TENSILE TESTING MACHINE)
TS 3241-1978 FABRICS COATED WITH RUBBER OR PLASTICS - DETERMINATION OF TEAR RESISTANCE

Society of Automotive Engineers (SAE), Breaking Strength and Tear Strength

SAE AMS3802E-1993 (Noncurrent)Cloth, Airplane, Cotton, Mercerized 50 Pounds (220 N) Breaking Strength
SAE AMS3372A-2001 Silicone Resin, Elastomeric High Tear Strength Elevated Temperature Cure
SAE AMS3372-1969 SILICONE RESIN, ELASTOMERIC High Tear Strength, Elevated Temperature Cure
SAE AMS3804D-1993 (Noncurrent)Cloth, Airplane, Cotton, Mercerized 65 Pounds (290 N) Breaking Strength
SAE AMS3806-1946 CLOTH; AIRPLANE, COTTON, MERCERIZED 80 lbs. Breaking Strength
SAE AMS3804-1946 CLOTH; AIRPLANE, COTTON, MERCERIZED 65 lbs. Breaking Strength
SAE AMS3804A-1954 CLOTH, AIRPLANE, COTTON, MERCERIZED 65 lb Breaking Strength
SAE AMS3806A-1952 CLOTH, AIRPLANE, COTTON, MERCERIZED 80 lb Breaking Strength
SAE AMS3806B-1968 CLOTH, AIRPLANE, COTTON, MERCERIZED 80 lb Breaking Strength
SAE AMS3804B-1969 CLOTH, AIRPLANE, COTTON, MERCERIZED 65 lb Breaking Strength
SAE AMS3806C-1980 CLOTH, AIRPLANE, COTTON, MERCERIZED 80 lb (355 N) Breaking Strength

GM Daewoo, Breaking Strength and Tear Strength

GMKOREA EDS-T-7690-2012 Test Method for Determining Tear Strength of Trim Materials ?? ??? ?? ?? ???? Version 3; English/Korean; Do Not Use on New Program; No Replacement [Replaced: GMKOREA EDS-T-7690]
GMKOREA EDS-T-7677-2011 Determination of Tear Propagation Strength (Version 3; English/Korean)
GMKOREA EDS-T-7646-2012 Test Method for Determining the Tear Strength of Textiles and Coated Fabric ??? ?? ??? ???? ???? Version 4; English/Korean; This standard may be applied only for current projects. It is Superceded for all future projects and replaced by ISO13937-2 [Repla

Military Standard of the People's Republic of China-General Armament Department, Breaking Strength and Tear Strength

GJB 1483-1992 Kie test method for surface crack fracture toughness of ultra-high strength steel plates

NZ-SNZ, Breaking Strength and Tear Strength

AS/NZS 3889:1993 Rubber and Plastics - Analysis of Multi-Peak Traces Obtained in Determinations of Tear Strength and Adhesion Strength

(U.S.) Parachute Industry Association, Breaking Strength and Tear Strength

PIA-TEST METHOD-4108C-2011 STRENGTH AND ELONGATION, BREAKING; TEXTILE WEBBING, TAPE AND BRAIDED ITEMS

Professional Standard - Aquaculture, Breaking Strength and Tear Strength

SC/T 4022-2007 Fishing nets.Determination of breaking load and knot breaking load of netting yarns

PK-PSQCA, Breaking Strength and Tear Strength

PS 349-1963 PAKISTAN STANDARD SPECIFICATION FOR DETERMINATION OF TEAR STRENGTH OF RUBBERS

ES-AENOR, Breaking Strength and Tear Strength

UNE 49 401 h19 Technical characteristics and tear strength test methods of packaging paper

NO-SN, Breaking Strength and Tear Strength

NS 3507-1982 Floorcoverings - Tensile strength and elongation at rupture

FI-SFS, Breaking Strength and Tear Strength

SFS 5443-1988 BETONI. HALKAISULUJUUS

Sichuan Provincial Standard of the People's Republic of China, Breaking Strength and Tear Strength

DB51/T 2150.2-2016 Nylon/spandex covered yarn test method part 2: breaking strength and elongation at break
DB51/T 1916.6-2014 Aramid III Fiber Test Methods Part 6: Breaking Strength, Elongation at Break and Modulus
DB51/T 2149.4-2016 Test methods for raw bamboo fibers - Part 4: Test methods for breaking strength and elongation at break

Hubei Provincial Standard of the People's Republic of China, Breaking Strength and Tear Strength

DB42/T 464-2008 The Testing method of breaking strength and breaking elongation of Polymer fibres used in construction

Professional Standard - Agriculture, Breaking Strength and Tear Strength

NY/T 2635-2014 Test method for breaking tenacity of ramie fiber

American National Standards Institute （ANSI), Breaking Strength and Tear Strength

ANSI/TAPPI T1009 om-2010 Tensile strength and elongation at break for fiber glass mats

Professional Standard - Light Industry, Breaking Strength and Tear Strength

QB/T 4118-2010 Footwear.Test methods for uppers.Tensile strength and elongation

IN-BIS, Breaking Strength and Tear Strength

IS 10810 Pt.8-1984 Cable test methods Part 8 Breaking strength and breaking elongation of impregnated paper insulation