ZH
RU
ES
thermoplastic
thermoplastic, Total:499 items.
In the international standard classification, thermoplastic involves: Rubber and plastics products, Installations in buildings, Plastics, Adhesives, Valves, Pipeline components and pipelines, Wastes, Processes in the food industry, Welding, brazing and soldering, External sewage systems, Paints and varnishes, Farm buildings, structures and installations, Fasteners, Insulating fluids, Agricultural machines, implements and equipment, Bearings, Analytical chemistry, Fluid storage devices, Standardization. General rules, Road vehicle systems, Gears, Road engineering, Rubber, Company organization and management, Farming and forestry, Miscellaneous domestic and commercial equipment, FLUID SYSTEMS AND COMPONENTS FOR GENERAL USE.
United States Navy, thermoplastic
Aerospace Industries Association/ANSI Aerospace Standards, thermoplastic
国家市场监督管理总局、中国国家标准化管理委员会, thermoplastic
- GB/T 37842-2019 Ball valves of thermoplastics materials
- GB/T 38008-2019 Gate valves of thermoplastics materials
- GB/T 39385-2020 Plastics piping and ducting systems—Thermoplastics pipes—Determination of ring flexibility
- GB/T 17037.2-2020 Plastics—Injection moulding of test specimens of thermoplastic materials—Part 2:Small tensile bars
- GB/T 39743-2021 Plain bearings—Thermoplastic bushes—Dimensions and tolerance
- GB/T 40933-2021 Plastics—Film and sheeting—Guidance on the testing of thermoplastic films
- GB/T 39997-2021 Thermoplastic pipework for underground installation at petrol filling stations
- GB/T 39379-2020 Thermoplastics piping systems for non-pressure applications—Test method for watertightness
Japanese Industrial Standards Committee (JISC), thermoplastic
- JIS A 5709:1979 Thermoplastic bathtubs
- JIS K 7212:1999 Plastics -- Determination of thermal stability of thermoplastics -- Oven method
- JIS K 6814:2008 Thermoplastics pipes -- Thermal reversion test method
- JIS K 5981:1992 Thermoplastic and thermosetting powder coating films
- JIS K 7151 AMD 1:2009 Plastics -- Compression moulding test specimens of thermoplastic materials(Amendment 1)
- JIS K 7152-3:1999 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 3: Small plates
- JIS K 6339:1999 Spray thermoplastic hoses for agricultural use
- JIS K 7152-2:1999 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 2: Small tensile bars
- JIS K 7206:1991 Testing method for Vicat softening temperature of thermoplastics
- JIS K 6263:2022 Rubber, vulcanized or thermoplastics -- Determination of stress relaxation
- JIS B 8362:2000 Textile reinforced thermoplastic hose assemblies for hydraulic use
Guangdong Provincial Standard of the People's Republic of China, thermoplastic
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, thermoplastic
- GB/T 27725-2011 Butterfly valves of thermoplastics materials
- GB/T 9352-2008 Plastic.Compression moulding of test specimens of thermoplastic materials
- GB/T 28494-2012 Globe valves of thermoplastics materials
- GB/T 9352-1988 Plastics--Compression moulding test specimens of thermoplastic materials
- GB/T 10798-2001 Table of universal wall thickness of thermoplastics pipe
- GB/T 10798-2001(XG1-2003) Table of universal wall thickness of thermoplastics pipe
- GB/T 9647-2015 Determination of Ring Stiffness of Thermoplastic Pipes
- GB/T 9647-2003 Thermoplastics pipes--Determination of ring stiffness
- GB/T 25197-2010 Welded static non-pressurized thermoplastic tanks
- GB/T 17037.3-2003 Plastics--Injection moulding of test specimens of thermoplastic materials--Part 3: Small plates
- GB/T 1633-2000 Plastics--Thermoplastic materials--Determination of vicat softening temperature(VST)
- GB/T 6671-2001 Thermoplastics pipes-Determination of longitudinal reversion
- GB/T 15585-1995 Determination of shrinkage for injection moulding thermoplastics
- GB/T 18991-2003 Thermoplastics pipes and fittings for hot and cold water systems
- GB/T 18042-2000 Thermoplastics pipes-Determination of creep ratio
- GB/T 27726-2011 Thermoplastics valves.Pressure test methods and requirements
- GB/T 17037.4-2003 Plastic--Injection moulding of test specimens of thermoplastic materials--Part 4: Determination of moulding shrinkage
- GB/T 8802-2001 Thermoplastics pipes and fitting-Determination of vicat softening temperature
TR-TSE, thermoplastic
- TS 859-1970 THERMOPLASTIC INSULATION TAPE
- TS 1825-1975 PLASTICS DETERMINATION OF THE VICAT SOFTENING TEMPERATURE OF THERMOPLASTICS
- TS 1800-1975 POLYETHYLENE THERMOPLASTIC MATERIALS — DESIGNATION —
- TS 1148-1978 PLASTICS-COMPRESSION MOULDING TEST SPECIMENS OF THERMOPLASTIC MATERIALS
- TS 212-1965 THERMOPLASTIC AND RUBBER INSULATED Y - CABLES
Association of German Mechanical Engineers, thermoplastic
National Sanitation Foundation (NSF), thermoplastic
- NSF 21-2015 Thermoplastic refuse containers
- NSF 21-2007 Thermoplastic Refuse Containers Printed 04/30/2007
- NSF 21-2003 Thermoplastic Refuse Containers Printed 03/27/03;
Korean Agency for Technology and Standards (KATS), thermoplastic
Lithuanian Standards Office , thermoplastic
- LST EN ISO 3994:2011 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (ISO 3994:2007)
- LST EN 1778-2000 Characteristic values for welded thermoplastics constructions - Determination of allowable stresses and moduli for design of thermoplastics equipment
- LST EN 15860-2010 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
- LST EN 12061-2002 Plastics piping systems - Thermoplastics fittings - Test method for impact resistance
- LST EN ISO 9969:2008 Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2007)
- LST EN ISO 9967:2008 Thermoplastics pipes - Determination of creep ratio (ISO 9967:2007)
- LST EN ISO 16136:2006 Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006)
- LST EN 28233-2001 Thermoplastics valves - Torque - Test method (ISO 8233:1988)
- LST EN 16296-2013 Imperfections in thermoplastics welded joints - Quality levels
- LST EN 16296-2021 Imperfections in thermoplastics welded joints - Quality levels
- LST EN ISO 13967:2010 Thermoplastics fittings - Determination of ring stiffness (ISO 13967:2009)
- LST EN 1871-2021 Road marking materials - Paint, thermoplastic and cold plastic materials - Physical properties
- LST EN 13067-2020 Plastics welding personnel - Qualification of welders - Thermoplastics welded assemblies
- LST EN 13655-2002 Plastics - Mulching thermoplastic films for use in agriculture and horticulture
- LST EN 12943-2001 Filler materials for thermoplastics - Scope, designation, requirements, tests
- LST EN ISO 16138:2006 Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006)
- LST EN 28659-2001 Thermoplastics valves - Fatigue strength - Test method (ISO 8659:1989)
- LST EN 14680-2007 Adhesives for non-pressure thermoplastic piping systems - Specifications
PL-PKN, thermoplastic
- PN C89418-1990 Plastics Determination of volatile matter in thermoplastics
- PN B75704-02-1990 Toilet seats of thermoplastics Toilet seats for standard water closet Dimensions
- PN B75704-03-1988 Toilet seats of thermoplastics Toilet seats for compact water closet Dimensions
- PN B75704-04-1988 Toilet seats of thermoplastics Toilet seats for children's water closet Dimensions
- PN C89004-1987 Thermoplastics products Marks and marking
- PN C89024-1993 Plastics. Thermoplastic materials. Determination of Vicat softening temperature
- PN-EN 16296-2021-10 E Imperfections in thermoplastics welded joints--Quality levels
- PN-EN 1871-2021-03 E Road marking materials -- Paint, thermoplastic and cold plastic materials -- Physical properties
- PN B75704-01-1986 Toilet seats of thermoplastics General specification and methods of test
- PN-EN 13067-2021-02 E Platics welding personnel--Qualfication of welders--Thermoplastics welded assemblies
Danish Standards Foundation, thermoplastic
- DS/EN ISO 3994:2011 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification
- DS/EN ISO 16135:2006 Industrial valves – Ball valves of thermoplastics materials
- DS/EN 1778:2000 Characteristic values for welded thermoplastics constructions - Determination of allowable stresses and moduli for design of thermoplastics equipment
- DS/EN ISO 16136:2006 Industrial valves – Butterfly valves of thermoplastics materials
- DS/EN ISO 16139:2006 Industrial valves – Gate valves of thermoplastics materials
- DS/EN 28233:2003 Thermoplastics valves - Torque - Test method
- DS/EN ISO 9967:2008 Thermoplastics pipes - Determination of creep ratio
- DS/EN ISO 9969:2008 Thermoplastics pipes - Determination of ring stiffness
- DS/EN ISO 13967:2010 Thermoplastics fittings - Determination of ring stiffness
- DS/EN ISO 16137:2006 Industrial valves – Check valves of thermoplastics materials
- DS/EN ISO 21787:2006 Industrial valves – Globe valves of thermoplastics materials
- DS/EN 15860:2010 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
- DS/EN ISO 16138:2006 Industrial valves - Diaphragm valves of thermoplastics materials
- DS/EN 12061:1999 Plastics piping systems - Thermoplastics fittings - Test method for impact resistance
- DS/EN 16296:2013 Imperfections in thermoplastics welded joints - Quality levels
- DS/EN 16296:2021 Imperfections in thermoplastics welded joints – Quality levels
- DS/EN 1871:2020 Road marking materials – Paint, thermoplastic and cold plastic materials – Physical properties
- DS/EN 13655:2003 Plastics - Mulching thermoplastic films for use in agriculture and horticulture
- DS/EN 12943:2000 Filler materials for thermoplastics - Scope, designation, requirements, tests
- DS/EN ISO 13968:2008 Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility
- DS/EN ISO 2505:2006 Thermoplastics pipes - Longitudinal reversion - Test method and parameters
- DS/CEN ISO/TR 27165:2012 Thermoplastics piping systems - Guidance for definitions of wall constructions for pipes
- DS/EN 14680:2007 Adhesives for non-pressure thermoplastic piping systems - Specifications
American National Standards Institute （ANSI), thermoplastic
- ANSI/NSF 21-1996 Thermoplastic Refuse Containers
- ANSI/ASTM F2686:2010 Specification for Glass Fiber Reinforced Thermoplastic Pipe
- ANSI/AWS B2.4:2012 Specification for Welding Procedure and Performance Qualification for Thermoplastics
- ANSI/AWS G1.2M/G1.2:1999 Specification for Standardized Ultrasonic Welding Test Specimen for Thermoplastics
- ANSI/ASTM D2837:2013 Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products
AASHTO - American Association of State Highway and Transportation Officials, thermoplastic
German Institute for Standardization, thermoplastic
- DIN 16986:1987 Thermoplastics flat bars; dimensions
- DIN 35230:2016-09 Plastics - Welding of thermoplastics - Specification of welding procedures; German version CEN/TS 16892:2015
- DIN EN ISO 9967:2008 Thermoplastics pipes - Determination of creep ratio (ISO 9967:2007); English version of DIN EN ISO 9967:2008-02
- DIN EN ISO 9969:2016-06 Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2016); German version EN ISO 9969:2016
- DIN EN ISO 13263:2018-01 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength (ISO 13263:2010); German version EN ISO 13263:2017
- DIN EN ISO 9969:2008 Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2007); English version of DIN EN ISO 9969:2008-03
- DIN 16960-1:1974 Welding of Thermoplastics; Principles
- DIN EN ISO 8233:2023-02 Thermoplastics valves - Torque - Test method (ISO/DIS 8233:2023); German and English version prEN ISO 8233:2023 / Note: Date of issue 2023-01-06*Intended as replacement for DIN EN 28233 (1991-06).
- DIN EN ISO 9967:2016-07 Thermoplastics pipes - Determination of creep ratio (ISO 9967:2016); German version EN ISO 9967:2016
- DIN EN ISO 13967:2010-04 Thermoplastics fittings - Determination of ring stiffness (ISO 13967:2009); German version EN ISO 13967:2009
- DIN EN ISO 13263:2018 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength (ISO 13263:2010)
- DIN EN ISO 16135 Berichtigung 1:2008 Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006); German version EN ISO 16135:2006, Corrigenda to DIN EN ISO 16135:2006-06
- DIN EN ISO 13967:2010 Thermoplastics fittings - Determination of ring stiffness (ISO 13967:2009); German version EN ISO 13967:2009
- DIN EN 15860:2018 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
- DIN EN ISO 13267:2022-09 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance (ISO 13267:2022); German and English version prEN ISO 13267:2022 / Note: Date ...
- DIN EN ISO 16138 Berichtigung 1:2008 Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006); German version EN ISO 16138:2006, Corrigenda to DIN EN ISO 16138:2006-06
- DIN EN 13655:2003 Plastics - Mulching thermoplastic films for use in agriculture and horticulture; German version EN 13655:2002
- DIN EN 28233:1991 Thermoplastics valves; torques; test method (ISO 8233:1988); german version EN 28233:1990
- DIN EN ISO 8659:2020-07 Thermoplastics valves - Fatigue strength - Test method (ISO 8659:2020); German version EN ISO 8659:2020
- DIN ISO 6691:2001-05 Thermoplastic for plain bearings - Classification and designation (ISO 6691:2000)
- DIN EN ISO 13264:2018-01 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings (ISO 13264:2010); German version EN ISO 13264:2017
- DIN EN 28233:1991-06 Thermoplastics valves; torques; test method (ISO 8233:1988); german version EN 28233:1990 / Note: To be replaced by DIN EN ISO 8233 (2020-09), DIN EN ISO 8233 (2023-02).
- DIN EN 16296:2021-07 Imperfections in thermoplastics welded joints - Quality levels; German version EN 16296:2021
- DIN EN ISO 13262:2018 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam (ISO 13262:2010)
- DIN EN ISO 13262:2018-01 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam (ISO 13262:2010); German version EN ISO 13262:2017
- DIN EN 1871:2020-12 Road marking materials - Paint, thermoplastic and cold plastic materials - Physical properties; German version EN 1871:2020
- DIN EN 12943:1999-12 Filler materials for thermoplastics - Scope, designation, requirements, tests; German version EN 12943:1999
- DIN EN 14541-1:2021 Plastics pipes and fittings - Utilisation of thermoplastics recyclates - Part 1: Terminology; German and English version prEN 14541-1:2021
- DIN EN 14541-1:2022 Plastics pipes and fittings - Utilisation of thermoplastics recyclates - Part 1: Vocabulary
- DIN EN 14541-1:2023-05 Plastics pipes and fittings - Utilisation of thermoplastics recyclates - Part 1: Vocabulary; German version EN 14541-1:2022
- DIN EN 14541-1:2023 Plastics pipes and fittings - Utilisation of thermoplastics recyclates - Part 1: Vocabulary
- DIN EN 15534-5:2014-04 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5: Specifications for cladding profiles and tiles; German version EN 15534-5:2014 / Note: To be re...
- DIN EN 15534-1:2018-02 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1: Test methods for characterisation of compounds and products; German version EN 15534-1:2014+A1:...
- DIN EN ISO 13968:2009 Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility (ISO 13968:2008); English version of DIN EN ISO 13968:2009-01
- DIN EN 28659:1991 Thermoplastic valves; fatigue strength; test method (ISO 8659:1989); german version EN 28659:1990
- DIN EN 13067:2019 Plastics welding personnel - Qualification of welders - Thermoplastics welded assemblies; German and English version prEN 13067:2019
- DIN EN 13067:2020-11 Plastics welding personnel - Qualification of welders - Thermoplastics welded assemblies; German version EN 13067:2020
- DIN 16887:1990-07 Determination of the long-term hydrostatic pressure resistance of thermoplastics pipes
- DIN EN ISO 13264:2018 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings (ISO 13264:2010)
- DIN EN ISO 8659:2020 Thermoplastics valves - Fatigue strength - Test method (ISO 8659:2020)
CZ-CSN, thermoplastic
- CSN 64 0861-1979 Plastios. Determination of melt flow index of thermoplastics
- CSN 64 0521-1984 Plastics. Determination of the Vicat oftening temperature of thermo- lastics
- CSN 64 0321-1963 Testing of polystyrene hermoplastics
- CSN ISO 9113:1993 Plastics. Polypropylene (PP) and propylene-copolymer thermoplastics. Determination of izotaciticity index
- CSN 64 0626-1989 Plastics. Determination of tensile trenght of thermoplastics pipes on n annular test piece
- CSN 64 0815-1986 Thermoplastic pipes. Methods for determination of longitudlnal reversion after annealing
International Organization for Standardization (ISO), thermoplastic
- ISO 1133:1981 Plastics — Determination of the melt flow rate of thermoplastics
- ISO 306:1974 Plastics — Determination of the Vicat softening temperature of thermoplastics
- ISO 13263:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength
- ISO 7349:1983 Thermoplastics valves; Connection references
- ISO 16790:2005 Plastics - Determination of drawing characteristics of thermoplastics in the molten state
- ISO 16790:2021 Plastics - Determination of drawing characteristics of thermoplastics in the molten state
- ISO 13267:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance
- ISO 13968:2008 Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility
- ISO 13967:2009 Thermoplastics fittings - Determination of ring stiffness
- ISO 13967:1998 Thermoplastics fittings - Determination of ring stiffness
- ISO 9967:1994 Thermoplastics pipes; determination of creep ratio
- ISO 9969:1994 Thermoplastics pipes; determination of ring stiffness
- ISO 9969:2007 Thermoplastics pipes - Determination of ring stiffness
- ISO 8233:1988 Thermoplastics valves; torque; test method
- ISO 4065:1996 Thermoplastic pipes - Universal wall thickness table
- ISO/DIS 8233 Thermoplastics valves — Torque — Test method
- ISO 4065:2018 Thermoplastics pipes - Universal wall thickness table
- ISO/FDIS 8233:2023 Thermoplastics valves — Torque — Test method
- ISO 13262:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam
- ISO 12091:1995 Structured-wall thermoplastics pipes - Oven test
- ISO 8328:1989 Plastics; amorphous thermoplastic moulding materials; determination of maximum reversion
- ISO 6691:1989 Thermoplastics for plain bearings — Classification and designation
- ISO 8659:1989 Thermoplastics valves; fatigue strength; test method
- ISO 8659:2020 Thermoplastics valves — Fatigue strength — Test method
- ISO 13966:1998 Thermoplastics pipes and fittings - Nominal ring stiffnesses
- ISO 10508:1995 Thermoplastics pipes and fittings for hot and cold water systems
- ISO 11173:1994 Thermoplastics pipes - Determination of resistance to external blows - Staircase method
- ISO 13268:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness
- ISO 7628:2010 Road vehicles - Thermoplastics tubing for air braking systems
- ISO 2505-1:1994 Thermoplastics pipes - Longitudinal reversion - Part 1: Determination methods
- ISO 2505-2:1994 Thermoplastics pipes - Longitudinal reversion - Part 2: Determination parameters
RO-ASRO, thermoplastic
- STAS 9047-1971 PLASTICS Determination of the melt flow rate of thermoplastics
- STAS 6572/1-1979 Plastics THERMOPLASTICS SPECIMENS MOULDING BY INJECTION General specifications
- STAS 6572/2-1979 Plastics THERMOPLASTICS SPECIMENS MOULDING BY COMPRESSION General specifications
- STAS SR ISO/TR 9080:1996 Thermoplastics pipes for the transport of fluids - Methods of extrapolation of hydrostatic stress rupture data to determine the long-term hydrostatic strength of thermoplastics pipe materials
British Standards Institution (BSI), thermoplastic
- BS PD CEN/TS 16892:2015 Plastics. Welding of thermoplastics. Specification of welding procedures
- BS 4998:1985 Specification for moulded thermoplastics dustbins (excluding lids)
- BS ISO 13263:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength
- BS ISO 16790:2005 Plastics - Determination of drawing characteristics of thermoplastics in the molten state
- BS EN ISO 9967:2008 Thermoplastics pipes - Determination of creep ratio
- BS ISO 4065:2018 Thermoplastics pipes. Universal wall thickness table
- BS EN ISO 16138:2006+A1:2019 Industrial valves. Diaphragm valves of thermoplastics materials
- BS ISO 13267:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance
- BS EN ISO 9969:1995 Thermoplastics pipes - Determination of ring stiffness
- BS EN ISO 9967:1995 Thermoplastics pipes - Determination of creep ratio
- BS EN ISO 9969:2008 Thermoplastics pipes - Determination of ring stiffness
- BS EN 16296:2012 Imperfections in thermoplastics welded joints. Quality levels
- BS EN ISO 13967:2010 Thermoplastics fittings. Determination of ring stiffness
- BS 5255:1989 Specification for thermoplastics waste pipe and fittings
- BS EN 28233:1992 Thermoplastics valves. Torque. Test method
- BS EN ISO 13967:2009 Thermoplastics fittings - Determination of ring stiffness
- BS EN ISO 13263:2017 Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics fittings. Test method for impact strength
- BS EN 13655:2002 Plastics. Mulching thermoplastic films for use in agriculture and horticulture
- BS EN 13655:2018 Plastics. Mulching thermoplastic films for use in agriculture and horticulture
- BS ISO 13264:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings
- BS EN 28659:1992 Thermoplastics valves - Fatigue strength - Test method
- BS ISO 7628:2010 Road vehicles - Thermoplastics tubing for air braking systems
- BS EN ISO 8659:2020 Tracked Changes. Thermoplastics valves. Fatigue strength. Test method
- BS 2782-11 Method 1121H:1996 Methods of testing plastics. Thermoplastics pipes, fittings and valves. Thermoplastics pipes for the transport of liquids under pressure. Calculation of head losses
- BS EN ISO 13267:2023 Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics inspection chamber and manhole bases. Test methods for buckling resistance
- BS 2782-11 Method 1121C:1997 Methods of testing plastics. Thermoplastics pipes, fittings and valves. Thermoplastics pipes for the conveyance of fluids. Nominal outside diameters and nominal pressures. Inch-based series
- BS EN ISO 1133:2005 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
- 20/30406605 DC BS ISO 16790. Plastics. Determination of drawing characteristics of thermoplastics in the molten state
- BS EN ISO 13262:2017 Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics spirally-formed structured-wall pipes. Determination of the tensile strength of a seam
- 20/30409938 DC BS ISO 13267. Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics inspection chamber and manhole bases. Test methods for buckling resistance
- BS ISO 4665:2016 Tracked Changes. Rubber, vulcanized or thermoplastic. Resistance to weathering
- BS EN 15860:2010 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
- BS EN 14541-1:2022 Plastics pipes and fittings — Utilisation of thermoplastics recyclates Part 1 : Vocabulary
- BS EN ISO 13264:2017 Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics fittings. Test method for mechanical strength or flexibility of fabricated fittings
- BS ISO 16790:2021 Tracked Changes. Plastics. Determination of drawing characteristics of thermoplastics in the molten state
- 23/30453876 DC BS EN ISO 8233. Thermoplastics valves. Torque. Test method
- BS EN ISO 9969:2016 Tracked Changes. Thermoplastics pipes. Determination of ring stiffness
- BS EN ISO 9967:2016 Tracked Changes. Thermoplastics pipes. Determination of creep ratio
- 20/30412494 DC BS EN ISO 8233. Thermoplastics valves. Torque. Test method
- BS 6728-2:1993 Thermoplastics hot water bottles - Specification for hot water bottles manufactured from polyolefin materials
CEN - European Committee for Standardization, thermoplastic
- EN ISO 1133:2005 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
- EN ISO 1133:1999 Plastics - Determination of the Melt Mass-Flow Rate (MFR) and the Melt Volume-Flow Rate (MVR) of Thermoplastics
- EN ISO 306:2004 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)
- EN ISO 9967:2007 Thermoplastics pipes - Determination of creep ratio
- EN ISO 9969:2007 Thermoplastics pipes - Determination of ring stiffness
- PREN 1871-2018 Road marking materials - Paint@ thermoplastic and cold plastic materials - Physical properties
European Committee for Standardization (CEN), thermoplastic
- EN ISO 306:2022 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2022)
- EN ISO 306:1996 Plastics - Thermoplastic Materials - Determination of Vicat Softening Temperature (VST) ISO 306:1994
- EN ISO 306:2013 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)
- PD CEN/TS 16892:2015 Plastics - Welding of thermoplastics - Specification of welding procedures
- CEN/TS 16892:2015 Plastics - Welding of thermoplastics - Specification of welding procedures
- EN ISO 13263:2017 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength (ISO 13263:2010)
- EN ISO 13967:2009 Thermoplastics fittings - Determination of ring stiffness (ISO 13967:2009)
- EN ISO 9967:1995 Plastics Pipes - Determination of Creep Ratio (ISO 9967 : 1994)
- EN ISO 9969:1995 Thermoplastic Pipes - Determination of Ring Stiffness (ISO 9969 : 1994)
- EN 16296:2012 Imperfections in thermoplastics welded joints - Quality levels
- EN 16296:2021 Imperfections in thermoplastics welded joints - Quality levels
- EN ISO 13262:2017 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam
- EN ISO 16137:2006 Industrial valves - Check valves of thermoplastics materials ISO 16137:2006
- EN ISO 8659:2020 Thermoplastics valves - Fatigue strength - Test method (ISO 8659:2020)
- EN ISO 294-3:2020 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020)
- EN ISO 294-3:1998 Plastics - Injection Moulding of Test Specimens of Thermoplastic Materials - Part 3: Small Plates ISO 294-3:1996
- EN ISO 294-3:2003 Plastics - Injection Moulding of Test Specimens of Thermoplastic Materials - Part 3: Small Plates ISO 294-3: 2002
- EN ISO 9967:2016 Thermoplastics pipes - Determination of creep ratio
- EN ISO 9969:2016 Thermoplastics pipes - Determination of ring stiffness
- EN ISO 11173:2017 Thermoplastics pipes - Determination of resistance to external blows - Staircase method (ISO 11173:1994)
- EN ISO 13968:2008 Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility
- FprEN ISO 8233:2021 Thermoplastics valves - Torque - Test method (ISO/FDIS 8233:2021)
- prEN ISO 8233 Thermoplastics valves - Torque - Test method (ISO/DIS 8233:2023)
- EN ISO/TR 27165:2012 Thermoplastics piping systems - Guidance for definitions of wall constructions for pipes
AENOR, thermoplastic
- UNE-EN ISO 3994:2014 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (ISO 3994:2014)
- UNE-EN 1778:2000 Characteristic values for welded thermoplastics constructions - Determination of allowable stresses and moduli for design of thermoplastics equipment
- UNE-EN 15860:2011 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
- UNE-EN 12061:1999 Plastics piping systems - Thermoplastics fittings - Test method for impact resistance
- UNE-EN ISO 16136:2007 Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006)
- UNE-EN 28233:1992 THERMOPLASTICS VALVES. TORQUE. TEST METHOD. (ISO 8233:1988)
- UNE-EN 16296:2013 Imperfections in thermoplastics welded joints - Quality levels
- UNE-EN ISO 13967:2010 Thermoplastics fittings - Determination of ring stiffness (ISO 13967:2009)
- UNE 53994:2012 Plastics. Thermoplastics and thermoplastic reinforced with steel strip pipes and fittings for drainage for drainage in building and civil engineering and agricultural drainage
- UNE-EN 12943:2000 FILLER MATERIALS FOR THERMOPLASTICS - SCOPE, DESIGNATION, REQUIREMENTS, TESTS
- UNE-EN ISO 16138:2007 Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006)
- UNE-EN 28659:1992 THERMOPLASTICS VALVES. FATIGUE STRENGTH. TEST METHOD. (ISO 8659:1989)
CH-SNV, thermoplastic
PT-IPQ, thermoplastic
NO-SN, thermoplastic
IN-BIS, thermoplastic
RU-GOST R, thermoplastic
- GOST 15088-2014 Plastics. Method for determination of Vicat softening temperature of thermoplastics
- GOST ISO 4065-2005 Thermoplastics pipes. Universal wall thickness table
- GOST R 59398-2021 Imperfections in thermoplastic welded joints. Classification
- GOST R 59399-2021 Imperfections in thermoplastics welded joints. Quality levels
- GOST R ISO 580-2008 Plastics piping systems. Injection-moulded thermoplastics fittings. Methods for determination of fittings appearance alteration after heating
- GOST 27078-2014 Thermoplastics pipes. Longitudinal reversion. Test method and parameters
- GOST R 54792-2011 Imperfections in thermoplastic welding joint. Description and evaluation
AIA/NAS - Aerospace Industries Association of America Inc., thermoplastic
KR-KS, thermoplastic
Association Francaise de Normalisation, thermoplastic
Professional Standard - Aviation, thermoplastic
- HB 7597-1998 General Specification for Thermoplastic Molded Parts
- HB/Z 349-2001 Heat-resistant thermoplastic injection molding process
AT-ON, thermoplastic
VDI - Verein Deutscher Ingenieure, thermoplastic
- VDI 2006-1970 Gestalten von Spritzgussteilen aus thermoplastischen Kunststoffen
CL-INN, thermoplastic
HU-MSZT, thermoplastic
Taiwan Provincial Standard of the People's Republic of China, thermoplastic
- CNS 9354-1982 Bushes for Plain Bearings, Press Bushes Made From Thermoplastics
- CNS 8516-1982 Method of Test for Flow Rates of Thermoplastics by Extrusion Plastometer
- CNS 12627-1989 General Rules for Tests for Thermal Ageing Properties of Thermoplastics in the Form of Sheet by Means of Ovens
- CNS 4393-1978 Method of Test for Vicat Softening Temperature of Thermoplastics
- CNS 7048-1981 Method of Determination for Dimensios of Thermoplastic Pipe and Fittings
- CNS 4395-1978 Compression Moulding Test Specimens of Thermoplastic Materials
- CNS 4394-1978 Injection Moulding Test Specimens of Thermoplastic Material
SG-SPRING SG, thermoplastic
- SS 369-2014 Specification for moulded thermoplastic refuse bins
AWS - American Welding Society, thermoplastic
- G1.1M/G1.1-2006 Guide to Ultrasonic Assembly of Thermoplastics
- B2.4-2006 Specification for Welding Procedure and Performance Qualification for Thermoplastics
ECIA - Electronic Components Industry Association, thermoplastic
- 230-1959 Color Marking of Thermoplastic Covered Wire
未注明发布机构, thermoplastic
- BS ISO 4065:2018(2020) Thermoplastics pipes — Universal wall thickness table
- BS EN ISO 13263:2017(2018) Thermoplastics piping systems for non - pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength
- BS EN 28233:1992(2000) Thermoplastics valves — Torque — Test method
- BS 5255:1989(2009) Specification for Thermoplastics waste pipe and fittings
- DIN EN ISO 294-3:1998 Plastics Injection molding of thermoplastic test specimens Part 3: Small plates
- BS ISO 13267:2022 Thermoplastics piping systems for non - pressure underground drainage and sewerage — Thermoplastics inspection chamber and manhole bases — Test methods for buckling resistance
- BS EN ISO 13264:2017(2018) Thermoplastics piping systems for non - pressure underground drainage and sewerage - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings
- BS EN 921:1995(1999)*BS 2782-11 MTD 1127A:1995 Plastics piping systems — Thermoplasticspipes — Determination of resistance to internal pressure at constant temperature
- BS 4998:1985(2012) Specification for Moulded thermoplastics dustbins (excluding lids)
- DIN EN ISO 306:2004 Plastics – Thermoplastics – Determination of Vicat softening temperature (VST) (ISO 306:2004); German version EN ISO 306:2004
- BS EN 638:1995(1999) Plastics piping and ducting systems — Thermoplastics pipes — Determination of tensile properties
ES-UNE, thermoplastic
- UNE-EN ISO 9969:2016 Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2016)
- UNE-EN ISO 13263:2018 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength (ISO 13263:2010)
- UNE-EN ISO 9967:2016 Thermoplastics pipes - Determination of creep ratio (ISO 9967:2016)
- UNE-EN ISO 8659:2021 Thermoplastics valves - Fatigue strength - Test method (ISO 8659:2020)
- UNE-EN ISO 13264:2018 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings (ISO 13264:2010)
- UNE-EN 16296:2022 Imperfections in thermoplastics welded joints - Quality levels
- UNE-EN ISO 13262:2018 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam (ISO 13262:2010)
- UNE-EN 1871:2021 Road marking materials - Paint, thermoplastic and cold plastic materials - Physical properties
- UNE-EN 14541-1:2022 Plastics pipes and fittings - Utilisation of thermoplastics recyclates - Part 1: Vocabulary
- UNE-CEN/TS 17158:2018 Composites made from cellulose based materials and thermoplastics (usually called wood polymer composites (WPC) or natural fibre composites (NFC)) - Determination of particle size of lignocellosic material (Endorsed by Asociación Española de Normaliz...
- UNE-ISO 1817:2018 Rubber, vulcanized or thermoplastic. Determination of the effect of liquids
- UNE-EN 13067:2021 Plastics welding personnel - Qualification of welders - Thermoplastics welded assemblies
GM North America, thermoplastic
VN-TCVN, thermoplastic
- TCVN 6141-2003 Thermoplastics pipes.Universal wall thickness table
- TCVN 6148-2007 Thermoplastics pipes.Longitudinal reversion.Test method and parameters
SE-SIS, thermoplastic
Professional Standard - Petrochemical Industry, thermoplastic
GOSTR, thermoplastic
- GOST ISO 4065-2019 Thermoplastic pipes. Universal wall thickness table
- GOST 34288-2017 Pipeline valves. Butterfly valves of thermoplastics materials. General specifications
- GOST 34289-2017 Pipeline valves. Gate valves of thermoplastics materials. General specifications
GM Europe, thermoplastic
- GME 14012-2008 Thermoplastic Tubing for Hot Diesel Fuel Lines (English/German; This standard may be applied only for current projects incl. Global Epsilon e (37##). It is Superceded for all future projects and replaced by GMW14587.)
International Federation of Trucks and Engines, thermoplastic
Aerospace Industries Association, thermoplastic
Professional Standard - Agriculture, thermoplastic
- GB/T 1633-1979 Test method for softening point (Vicat) of thermoplastics
Professional Standard - Commodity Inspection, thermoplastic
- SN/T 0906-2000 Method for injection moulding test spcimens of thermoplastic materials for import and export
ZA-SANS, thermoplastic
- SANS 1655:2004 Welding of thermoplastics - Welding rods, fillers and solvents
- SANS 6269:2005 Welding of thermoplastics - Test methods for welded joints
- SANS 10269:2009 Welding of thermoplastics - Testing and approval of welders
- SANS 3127:1994 Thermoplastics pipes - Determination of resistance to external blows - Round-the-clock method
(U.S.) Ford Automotive Standards, thermoplastic
- FORD WD 954-2012 Material and Performance Requirements for Screws Used in Thermoplastics Materials
- FORD WD954-2015 Material and Performance Requirements for Screws Used in Thermoplastics Materials
BE-NBN, thermoplastic
- NBN-EN 28659-1992 Thermoplastic valves - Fatigue strength - Test method
- NBN T 42-003-1989 Thermoplastic pipes - General definitions, nominal values and tolerances
- NBN T 42-009-1988 Thermoplastic pipes - Directives for storage, handling, transport and assembling
(U.S.) Plastic Pipe Association, thermoplastic
TH-TISI, thermoplastic
- TIS 1899-1999 Thermoplastics pipes and fittings for hot and cold water systems
Professional Standard - Chemical Industry, thermoplastic
- HG/T 2301-2008 Plastics hoses.Textile-reinforced types for compressed-air applications.Specification
- HG/T 3045-2008 Plastics hoses-Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials-specification
- HG/T 2301-1992 Fabric reinforced thermoplastic hoses for compressed air
- HG/T 3044-2011 Thermoplastics hoses,textile-reinforced, for general-purpose water applications.Specification
IT-UNI, thermoplastic
- UNI EN 16296-2021 Imperfections in thermoplastics welded joints - Quality levels
- UNI EN 13067-2021 Plastics welding personnel - Qualification of welders - Thermoplastics welded assemblies
API - American Petroleum Institute, thermoplastic
- API SPEC 5LP-1981 SPECIFICATION FOR THERMOPLASTIC LINE PIPE (PVC AND CPVC) (FIFTH EDITION)
- API SPEC 15LP-1981 SPECIFICATION FOR THERMOPLASTIC LINE PIPE (PVC AND CPVC) FIFTH EDITION
American Society for Testing and Materials (ASTM), thermoplastic
- ASTM D2837-11 Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products
- ASTM D2837-13 Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products
- ASTM D2837-13e1 Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products
- ASTM D2774-94 Standard Practice for Underground Installation of Thermoplastic Pressure Piping
- ASTM D2774-01 Standard Practice for Underground Installation of Thermoplastic Pressure Piping
- ASTM D5630-94 Standard Test Method for Ash Content in Thermoplastics
- ASTM D5630-01 Standard Test Method for Ash Content in Thermoplastics
- ASTM D2774-21a Standard Practice for Underground Installation of Thermoplastic Pressure Piping
- ASTM D2774-21 Standard Practice for Underground Installation of Thermoplastic Pressure Piping
- ASTM F409-17 Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings
- ASTM D1238-90b Standard Test Method for Flow Rates of Thermoplastics by Extrusion Plastometer
- ASTM D1238-85 Standard Test Method for Flow Rates of Thermoplastics by Extrusion Plastometer
Professional Standard - Machinery, thermoplastic
- JB/T 8720-1998 General specifications of thermoplastic parts for tractors
Group Standards of the People's Republic of China, thermoplastic
- T/CPCIF 0194-2022 The anti-blooming test of powder flame retardants in thermoplastics
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, thermoplastic
- GB/T 34445-2017 Test method of hot-tack property for heat sealing surfaces of thermoplastic polymer and thermoplastic composite material
Underwriters Laboratories (UL), thermoplastic