ZH
RU
ES
temperature
temperature, Total:497 items.
In the international standard classification, temperature involves: Environmental testing, Farm buildings, structures and installations, Cans. Tins. Tubes, Road vehicle systems, Fluid storage devices, Pipeline components and pipelines, Semiconductor devices, Heat pumps, Fasteners for aerospace construction, Thermodynamics and temperature measurements, Kitchen equipment, Pumps, Fibre optic communications, Analytical chemistry, Linear and angular measurements, Testing of metals, Construction materials, Sports equipment and facilities, Valves, Protection against excessive pressure, Services, Processes in the food industry, Water quality, Lighting, Optics and optical measurements, Agricultural machines, implements and equipment, Rubber, Geology. Meteorology. Hydrology, Protection of and in buildings, Welding, brazing and soldering, Quantities and units, Refrigerating technology, Resistors, Elements of buildings, Tyres, Non-metalliferous minerals, Terminology (principles and coordination), Internal combustion engines for road vehicles, Medical equipment, Measurement of force, weight and pressure, Laboratory medicine, Leather technology, Vocabularies, Equipment for children, Energy and heat transfer engineering in general, Printed circuits and boards, Metrology and measurement in general, Reinforced plastics, Radiation measurements, Extraction and processing of petroleum and natural gas, Farming and forestry, Protection against fire, Automatic controls for household use, Heat treatment, Equipment for the chemical industry, Shop fittings, Meat, meat products and other animal produce, Rubber and plastics products, Materials for aerospace construction, Electrical accessories, Prepackaged and prepared foods, Products of the textile industry, Installations in buildings, Glass, Building accessories, Ferrous metals.
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, temperature
- GB/T 28850-2012 Thermostatic baths and circulators.Heated liquid baths
- GB/T 26808-2011 Thermostatic baths and circulators.Refrigerated baths
- GB/T 28853-2012 Thermostatic baths and circulators.Heated circulators
- GB/T 26809-2011 Thermostatic baths and circulators.Refrigerated circulators
- GB/T 18621-2002 Design regulation on greenhouse ventilation and cooling
- GB 26538-2011 Fired heat preservation brick and block
- GB/T 41837-2022 Hot spring service—Hot spring water quality requirement
- GB/T 13195-1991 Water quality--Determination of water temperature--Thermometer or reversing thermometer method
- GB/T 29060-2012 The bricks & blocks composited insulation materials
- GB/T 8071-2001 Chrysotile asbestos
- GB/T 8071-2008 Chrysotile asbestos
- GB/T 18591-2001 Welding--Guidance on the measurement of preheating temperature,interpass temperature and preheat maintenance temperature
- GB/T 21985-2008 Temperature index of high temperature harm for main crops
- GB/T 32539-2016 High temperature carburizing
- GB/T 7759-1996 Rubber, Vulcanized or thermoplastic--Determination of compression set at ambient elevated or low temperatures
Qinghai Provincial Standard of the People's Republic of China, temperature
Ningxia Provincial Standard of the People's Republic of China, temperature
Korean Agency for Technology and Standards (KATS), temperature
- KS B 6156-2014(2019) Temperature limiters and thermostats for hot water boilers
- KS B 6156-1998 Temperature limiters and thermostats for hot water boilers
- KS B 6156-1988 Temperature limiters and thermostats for hot water boilers
- KS B ISO 24490-2017(2022) Cryogenic vessels－Pumps for cryogenic service
- KS C 0076-1990 Methods for determining distribution temperature and colour temperature or correlated co1our temperature of light sources
- KS A 0513-2016 Methods of temperature measurement by optical pyrometers
- KS W ISO 8279-2007(2018) Aerospace－Nuts, hexagonal, plain, normal height, normal across flats, with MJ threads, classifications：600 MPa(at ambient temperature)/120 ℃,600 MPa(at ambient temperature)/235 ℃, 900 MPa(at ambient t
- KS B ISO 24490:2006 Cryogenic vessels－Pumps for cryogenic service
- KS B ISO 24490:2017 Cryogenic vessels－Pumps for cryogenic service
- KS C 0076-1990(2022) Methods for determining distribution temperature and colour temperature or correlated co1our temperature of light sources
- KS B ISO 23208:2006 Cryogenic vessels－Cleanliness for cryogenic service
- KS A 0512-1994 Method of temperature measurement by liquid-in-glass thermometers
- KS B ISO 23208-2023 Cleanability of cryogenic containers and cryogenic devices
- KS C 0076-1990(2017) Methods for determining distribution temperature and colour temperature or correlated co1our temperature of light sources
- KS A 0514-2005(2020) Method of temperature measurement by filled-system thermometers and bimetaillic thermometers
- KS B ISO 13916-2003(2008) Welding－Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
- KS A 0512-2009 Method of temperature measurement by liquid-in-glass thermometers
- KS B ISO 23208:2018 Cryogenic vessels — Cleanliness for cryogenic service
- KS R 3036-2016 Thermostat
- KS P 3104-2007 Moxa cautery apparatus
- KS B 5312-2001(2021) Barographs
- KS C 8308-1990(2020) Thermostats
- KS R 3036-2016(2021) Thermostat
- KS P 3104-1979 Moxa cautery apparatus
- KS C 8308-1985 Thermostats
- KS B ISO 13916:2003 Welding-Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
- KS A 0514-1994 Method of temperature measurement by filled-system thermometers and bimetallic thermometers
- KS B ISO 13916:2013 Welding－Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
- KS W ISO 9199:2020 Aerospace — Nuts, bihexagonal, selflocking, MJ threads,classifications: 1 100 MPa (at ambient temperature)/425 °C, 1 100MPa (at ambient temperature)/650 °C, 1 210 MPa (at ambient temperature)/425 °C,
- KS W 0935-2018 Aerospace — Nuts, hexagonal, slotted(castellated), normal height, normal across flats, with MJ threads, classifications: 600 MPa(at ambient temperature)/120 ℃, 600 MPa(at ambient temperature)/ 235 ℃,
- KS R 0016-1971 Method of high and low temperature test for automobile parts
- KS A 0513-2016(2021) Methods of temperature measurement by optical pyrometers
- KS B ISO 21028-1:2006 Cryogenic vessels-Toughness requirements for material at cryogenic temperature-Part 1:Temperatures below-80 ℃
- KS B ISO 21028-2:2021 Cryogenic vessels — Toughness requirements for materials at cryogenic temperature —Part 2: Temperatures between −80 ℃ and −20 ℃
- KS B ISO 21028-1:2017 Cryogenic vessels－Toughness requirements for material at cryogenic temperature－Part 1：Temperatures below－80 ℃
- KS W ISO 9199:2007 Aerospace－Nuts, bihexagonal, self-locking, MJ threads,classifications：1 100 MPa(at ambient temperature)/425 ℃,1 100 MPa(at ambient temperature)/650 ℃1 210 MPa(at ambient temperature)/425 ℃,1 210 MPa(at ambient temperature)/730 ℃1 550 MPa(at ambient temper
- KS B ISO 21028-1-2017(2022) Cryogenic vessels－Toughness requirements for material at cryogenic temperature－Part 1：Temperatures below－80 ℃
- KS A 0512-2009(2019) Method of temperature measurement by liquid-in-glass thermometers
- KS C IEC PAS 62178-2003(2008) Temperature cycling
- KS B 5310-2001(2016) Thermographs
- KS B ISO 21028-2-2006(2016) Cryogenic vessels－Toughness requirements for materials at cryogenic temperature－Part 2：Temperatures between －80 ℃ and －20℃
- KS W ISO 9618:2007 Aerospace－Nuts, hexagonal, slotted(castellated), reduced height,normal across flats, with MJ threads, classifications：450 MPa (at ambient temperature)/120 ℃,450 MPa (at ambient temperature)/235 ℃,600 MPa (at ambient temperature)/425 ℃,900 MPa (at ambient
- KS B 6156-2014 Temperature limiters and thermostats for hot water boilers
- KS R 9191-1996 High and low temperature testing methods for parts of railway signaling
- KS B 6156-2003 Temperature limiters and thermostats for hot water boilers
- KS D 0410-2012(2017) Method for determination of flow rate at elevated temperatures for powder mixed intended for warm compacting
CZ-CSN, temperature
United States Navy, temperature
Professional Standard - Light Industry, temperature
Group Standards of the People's Republic of China, temperature
HU-MSZT, temperature
NO-SN, temperature
- NS 5508-1978 Thermometers - Thermometer wells for industrial thermometers type C
- NS 5509-1978 Thermometers - Glass inserts for industrial thermometers
- NS 4248-1978 Greenhouses equipment
British Standards Institution (BSI), temperature
- BS EN 12434:2000 Cryogenic vessels - Cryogenic flexible hoses
- BS EN 12434:2000(2008) Cryogenic vessels - Cryogenic flexible hoses
- BS A 317:1997 Nuts, hexagonal, plain, normal height, normal across flats, with MJ threads, classifications - 600 MPa (at ambient temperature)/120 °C, 600 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/425 °C, 1100 MPa (at ambient temperature)/235
- BS EN ISO 24490:2016 Cryogenic vessels. Pumps for cryogenic service
- BS EN 13275:2000 Cryogenic vessels - Pumps for cryogenic service
- BS ISO 21014:2007 Cryogenic vessels - Cryogenic insulation performance
- BS ISO 21014:2019+A1:2022 Cryogenic vessels. Cryogenic insulation performance
- BS EN 13275:2000(2008) Cryogenic vessels - Pumps for cryogenic service
- BS ISO 8279:2008 Aerospace - Nuts, hexagonal, plain, normal height, normal across flats, with MJ threads, classifications: 600 MPa (at ambient temperature)/120 °C, 600 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/425 °C, 1100 MPa (at ambient tempe
- BS A 314:1997 Aerospace - Nuts, hexagonal, plain, reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/120 °C, 450 MPa (at ambient temperature)/235 °C, 600 MPa (at ambient temperature)/425 °C, 900 MPa (at ambient tempe
- BS ISO 21011:2009 Cryogenic vessels. Valves for cryogenic service
- BS ISO 21011:2008 Cryogenic vessels - Valves for cryogenic service
- BS EN 1626:2008 Cryogenic vessels - Valves for cryogenic service
- BS EN ISO 13916:2017 Welding. Measurement of preheating temperature, interpass temperature and preheat maintenance temperature
- BS A 315:1997 Aerospace - Nuts, hexagonal, slotted (castellated), reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/120 °C, 450 MPa (at ambient temperature)/235 °C, 600 MPa (at ambient temperature)/425 °C, 900 MPa (
- BS EN ISO 21028-1:2016 Cryogenic vessels. Toughness requirements for materials at cryogenic temperature. Temperatures below -80 C
- BS ISO 9609:2016 Aerospace - Nuts, hexagonal, plain, reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature) /120 degrees C, 450 MPa (at ambient temperature) /235 degrees C, 600 MPa (at ambient temperature) /425 degrees C, 9
- BS ISO 23208:2017 Cryogenic vessels. Cleanliness for cryogenic service
- BS EN 12300:1999(2008) Cryogenic vessels - Cleanliness for cryogenic service
- BS EN 12300:1999 Cryogenic vessels - Cleanliness for cryogenic service
- BS EN 17527:2021 Helium cryostats. Protection against excessive pressure
- BS EN ISO 23208:2019+A1:2020 Cryogenic vessels. Cleanliness for cryogenic service
- BS EN 13371:2002 Cryogenic vessels - Couplings for cryogenic service
- BS EN 13371:2002(2008) Cryogenic vessels - Couplings for cryogenic service
- BS EN ISO 13916:1997 Welding - Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
- 21/30429537 DC BS EN ISO 21011. Cryogenic vessels. Valves for cryogenic service
- 22/30436784 DC BS ISO 21014 AMD1. Cryogenic vessels. Cryogenic insulation performance
- BS EN 13031-1:2019 Greenhouses - Design and construction - Commercial production greenhouses
- BS EN 13031-1:2002 Greenhouses - Design and construction - Commercial production greenhouses
- BS EN 60751:2008 Industrial platinum resistance thermometers and platinum temperature sensors
- 20/30392676 DC BS EN 17527. Helium cryostats. Protection against excessive pressure
ESDU - Engineering Sciences Data Unit, temperature
Danish Standards Foundation, temperature
Lithuanian Standards Office , temperature
AENOR, temperature
KR-KS, temperature
- KS B ISO 24490-2017 Cryogenic vessels－Pumps for cryogenic service
- KS B ISO 23208-2018 Cryogenic vessels — Cleanliness for cryogenic service
- KS B ISO 23208-2018(2023) Cryogenic vessels — Cleanliness for cryogenic service
- KS P 6111-2017(2022) Incubator
- KS W ISO 9199-2020 Aerospace — Nuts, bihexagonal, selflocking, MJ threads,classifications: 1 100 MPa (at ambient temperature)/425 °C, 1 100MPa (at ambient temperature)/650 °C, 1 210 MPa (at ambient temperature)/425 °C,
- KS B ISO 21028-2-2021 Cryogenic vessels — Toughness requirements for materials at cryogenic temperature —Part 2: Temperatures between −80 ℃ and −20 ℃
- KS B ISO 21028-1-2017 Cryogenic vessels－Toughness requirements for material at cryogenic temperature－Part 1：Temperatures below－80 ℃
German Institute for Standardization, temperature
- DIN EN 12434:2000 Cryogenic vessels - Cryogenic flexible hoses; German version EN 12434:2000
- DIN EN ISO 24490:2016-08 Cryogenic vessels - Pumps for cryogenic service (ISO 24490:2016); German version EN ISO 24490:2016
- DIN EN 13275:2000 Cryogenic vessels - Pumps for cryogenic service; German version EN 13275:2000
- DIN EN 17527:2022 Helium cryostats - Protection against excessive pressure
- DIN EN 17527:2020 Helium cryostats - Protection against excessive pressure; German and English version prEN 17527:2020
- DIN EN 17527:2022-05 Helium cryostats - Protection against excessive pressure; German version EN 17527:2021
- DIN EN 1626:2009 Cryogenic vessels - Valves for cryogenic service; English version of DIN EN 1626:2009-01
- DIN EN ISO 13916:2018-03 Welding - Measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO 13916:2017); German version EN ISO 13916:2017
- DIN EN 1626:1999 Cryogenic vessels - Valves for cryogenic service; German version EN 1626:1999
- DIN EN ISO 23208:2020-11 Cryogenic vessels - Cleanliness for cryogenic service (ISO 23208:2017 + Amd 1:2020); German version EN ISO 23208:2019 + A1:2020
- DIN EN ISO 13916:1996 Welding - Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO 13916:1996); German version EN ISO 13916:1996
- DIN EN 1626:2009-01 Cryogenic vessels - Valves for cryogenic service; German version EN 1626:2008 / Note: To be replaced by DIN EN ISO 21011 (2021-04).
- DIN EN ISO 21011:2021 Cryogenic vessels - Valves for cryogenic service (ISO/DIS 21011:2021); German and English version prEN ISO 21011:2021
- DIN EN 13371:2002-03 Cryogenic vessels - Couplings for cryogenic service; German version EN 13371:2001
- DIN EN ISO 21011:2021-04 Cryogenic vessels - Valves for cryogenic service (ISO/DIS 21011:2021); German and English version prEN ISO 21011:2021 / Note: Date of issue 2021-03-19*Intended as replacement for DIN EN 1626 (2009-01).
- DIN SPEC 18072:2014 Sales greenhouses
- DIN SPEC 18072:2014-03 Sales greenhouses
- DIN EN 60751:2009 Industrial platinum resistance thermometers and platinum temperature sensors (IEC 60751:2008); German version EN 60751:2008
National Metrological Technical Specifications of the People's Republic of China, temperature
- JJF 1170-2007 Calibration Specification for Cryogenic Resistance Thermometers with Negative Sensitivity
- JJF 1632-2017 Calibration Specification for Temperature Parameters of Temperature Switches
PL-PKN, temperature
Defense Logistics Agency, temperature
AT-ON, temperature
- ONORM M 5820-1965 Die Auswahl der Begriffe und deren Erkl?rung erfolgte im Hinblick auf den praktischen Gebrauch von Strahlungspyrometern.
- ONORM M 5801-1955
- OENORM EN ISO 21011:2021 Cryogenic vessels - Valves for cryogenic service (ISO/DIS 21011:2021)
- ONORM EN ISO 13916:1996 Welding-Guidance on the measurement of preheating trmperature,interpass temperature and preheat maintenance temperature
- ONORM C 9436-1994 Testing of elastomers - Determination of compression set under constant deflection at normal temperature, at higher and low temperatures
Taiwan Provincial Standard of the People's Republic of China, temperature
IN-BIS, temperature
American National Standards Institute （ANSI), temperature
European Committee for Standardization (CEN), temperature
- prEN ISO 24490 rev Cryogenic vessels - Pumps for cryogenic service
- EN ISO 24490:2016 Cryogenic vessels - Pumps for cryogenic service
- EN 13275:2000 Cryogenic Vessels - Pumps for Cryogenic Service
- FprEN 17527-2021 Helium cryostats - Protection against excessive pressure
- EN 13371:2001 Cryogenic vessels - Couplings for cryogenic service
- EN ISO 21028-1:2016 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 °C (ISO 21028-1:2016)
- prEN ISO 21011:2021 Cryogenic vessels - Valves for cryogenic service (ISO/DIS 21011:2021)
- FprEN ISO 21011 Cryogenic vessels - Valves for cryogenic service (ISO/FDIS 21011:2023)
- EN ISO 13916:1996 Welding - Guidance on the Measurement of Preheating Temperature, Interpass Temperature and Preheat Maintenance Temperature ISO 13916: 1996
- EN 13031-1:2001 Greenhouses - Design and construction - Part 1: Commercial production greenhouses
Canadian Standards Association (CSA), temperature
Professional Standard - Machinery, temperature
Association Francaise de Normalisation, temperature
ES-UNE, temperature
- UNE-EN ISO 24490:2016 Cryogenic vessels - Pumps for cryogenic service (ISO 24490:2016)
- UNE-EN 17527:2022 Helium cryostats - Protection against excessive pressure
- UNE-EN ISO 23208:2020 Cryogenic vessels - Cleanliness for cryogenic service (ISO 23208:2017)
- UNE-EN ISO 13916:2018 Welding - Measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO 13916:2017)
- UNE-EN ISO 23208:2020/A1:2021 Cryogenic vessels - Cleanliness for cryogenic service - Amendment 1 (ISO 23208:2017/Amd 1:2020)
- UNE-EN IEC 60751:2022 Industrial platinum resistance thermometers and platinum temperature sensors (Endorsed by Asociación Española de Normalización in April of 2022.)
- UNE-EN 60751:2008 Industrial platinum resistance thermometers and platinum temperature sensors (Endorsed by AENOR in February of 2009.)
机械电子工业部, temperature
- JB 5376-1991 Low temperature constant temperature bath technical conditions
American Society for Testing and Materials (ASTM), temperature
- ASTM E667-98(2003) Standard Specification for Mercury-in-Glass, Maximum Self-Registering Clinical Thermometers
- ASTM E667-98 Standard Specification for Mercury-in-Glass, Maximum Self-Registering Clinical Thermometers
- ASTM E667-98(2009) Standard Specification for Mercury-in-Glass, Maximum Self-Registering Clinical Thermometers
- ASTM A524/A524M-21 Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures
RU-GOST R, temperature
- GOST 9454-1978 Metals. Method for testing the impact strength at low, room and high temperature
- GOST 14002-1974 Pickup-temperature and differential temperature gauging switches ssi
- GOST 29297-1992 Welding, brazing soldering and braze welding of metals. Nomenclature and reference numbers of processes
- GOST 14894-1969 Thermoelectric standard 2-class and general industry use thermometers for low temperatures. Methods and means of verification
- GOST 33519-2015 Polymer composites. Test method for compression at normal, low and high temperatures
- GOST 9249-1959 Normal temperature
International Organization for Standardization (ISO), temperature
- ISO 21014:2006 Cryogenic vessels - Cryogenic insulation performance
- ISO 24490:2016 Cryogenic vessels - Pumps for cryogenic service
- ISO 24490:2005 Cryogenic vessels - Pumps for cryogenic service
- ISO 21014:2019 Cryogenic vessels — Cryogenic insulation performance
- ISO 8279:2008 Aerospace - Nuts, hexagonal, plain, normal height, normal across flats, with MJ threads, classifications: 600 MPa (at ambient temperature)/120 °C, 600 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/425 °C, 1100 MPa (at ambient tempe
- ISO 21011:2008 Cryogenic vessels - Valves for cryogenic service
- ISO 23208:2005 Cryogenic vessels - Cleanliness for cryogenic service
- ISO 3383:1985 Rubber; General directions for achieving elevated or subnormal temperatures for test purposes
- ISO 23208:2017 Cryogenic vessels - Cleanliness for cryogenic service
- ISO 13916:2017 Welding - Measurement of preheating temperature, interpass temperature and preheat maintenance temperature
- ISO 9157:2002 Aerospace - Nuts, spline-drive, self-locking, with MJ threads, classifications: 1100 MPa (at ambient temperature)/425°C, 1100 MPa (at ambient temperature)/650°C, 1210 MPa (at ambient temperature)/425°C, 1210 MPa (at ambient temperature)/730°C, 1550 MPa (a
- ISO/CD 24490:2023 Cryogenic vessels — Pumps for cryogenic service
- ISO 13916:1996 Welding - Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
- ISO/FDIS 21011 Cryogenic vessels — Valves for cryogenic service
- ISO 21028-2:2004 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 2: Temperatures between - 80 °C and - 20 °C
- ISO 21028-1:2004 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 °C
- ISO 21028-1:2016 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 degrees C
- ISO 21028-2:2018 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 2: Temperatures between -80 degrees C and -20 degrees C
- ISO/CD 21028-1:2011 Cryogenic vessels — Toughness requirements for materials at cryogenic temperature — Part 1: Temperatures below -80 degrees C
- ISO 21014:2019/Amd 1:2022 Cryogenic vessels — Cryogenic insulation performance — Amendment 1
- ISO 14064-1:2018/CD Amd 1:2023 Greenhouse gases
- ISO 9199:1998 Aerospace - Nuts, bihexagonal, self-locking, MJ threads, classifications: 1100 MPa (at ambient temperature)/425 °C, 1100 MPa (at ambient temperature)/650 °C, 1210 MPa (at ambient temperature)/425 °C, 1210 MPa (at ambient temperature)/730 °C, 1550 MPa (at
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), temperature
Professional Standard - Agriculture, temperature
RO-ASRO, temperature
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, temperature
Standard Association of Australia （SAA）, temperature
JO-JSMO, temperature
Association of German Mechanical Engineers, temperature
Tianjin Provincial Standard of the People's Republic of China, temperature
- DB12/T 564-2015 Low temperature food storage and transportation temperature control technology
- DB12/T 3016-2018 Technical requirements for temperature control of low-temperature food storage and transportation
- DB12/T 811-2018 Technical Specifications for Solar Greenhouse Intelligent Electric Heating System
TR-TSE, temperature
中华人民共和国环境保护部, temperature
- GB 13195-1991 Water quality-Determination of water tecuperature-Thermometer or reverging thermometer method
Japanese Industrial Standards Committee (JISC), temperature
- JIS Z 8725:2015 Methods for determining distribution temperature and colour temperature or correlated colour temperature of light sources
- JIS Z 8707:1992 Method of temperature measurement by filled-system thermometers and bimetallic thermometers
- JIS Z 8725:1999 Methods for determining distribution temperature and color temperature or correlated color temperature of light sources
- JIS Z 8706:1980 Methods of temperature measurement by optical pyrometers
- JIS T 1702:1997 Incubator
- JIS Z 3703:2004 Welding -- Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
- JIS S 2004:1984 Heat retaining bottles
- JIS K 6262:2006 Rubber, vulcanized or thermoplastic -- Determination of compression set at ambient, elevated or low temperatures
- JIS Z 8725:1987 Methods for determining distribution temperature and colour temperature or correlated colour temperature of light sources
- JIS Z 8705:1992 Method of temperature measurement by liquid-in-glass thermometers
CEN - European Committee for Standardization, temperature
- EN ISO 23208:2019 Cryogenic vessels - Cleanliness for cryogenic service
- EN ISO 13916:2017 Welding - Measurement of preheating temperature@ interpass temperature and preheat maintenance temperature
- EN ISO 21028-2:2018 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 2: Temperatures between -80 degrees C and -20 degrees C
Xinjiang Provincial Standard of the People's Republic of China, temperature
Military Standard of the People's Republic of China-General Armament Department, temperature
- GJB 1087-1991 Room temperature curing high temperature inorganic adhesive
- GJB 10058-2021 Specification for high-temperature multi-color irreversible temperature-indicating coatings
未注明发布机构, temperature
- DIN EN 12300:1999 Cryo container – purity for cryogenic operation DIN
- DIN V 18165-1:2002 Fiber insulation materials for construction Part 1: Insulation materials for thermal insulation
IT-UNI, temperature
Society of Automotive Engineers (SAE), temperature
Guangdong Provincial Standard of the People's Republic of China, temperature
Beijing Provincial Standard of the People's Republic of China, temperature
- DB11/T 3016-2018 Technical requirements for temperature control of low-temperature food storage and transportation
Hebei Provincial Standard of the People's Republic of China, temperature
- DB13/T 3016-2018 Technical requirements for temperature control of ground temperature food storage and transportation
Professional Standard - Petroleum, temperature
- SY/T 5825-1993 Mechanical downhole thermometer temperature test
- SY/T 5825-2014 Procedures of temperature test with down-hole electronic thermometers
- SY/T 0324-2014 Technical specification for thermal insulation of directly buried high temperature steel pipeline
- SY/T 5825-2007 Procedures of temperature test by a electronic down-hole thermometer
- SY 0324-2014 Technical specification for thermal insulation of directly buried high temperature steel pipes
Shandong Provincial Standard of the People's Republic of China, temperature
Anhui Provincial Standard of the People's Republic of China, temperature
- DB34/T 1279-2014 Inorganic thermal insulation mortar wall thermal insulation system
- DB34/T 3826-2021 Technical standard for thermal insulation board external wall external thermal insulation engineering
- DB34/T 2418-2015 Expanded Perlite Insulation Board Exterior Wall Exterior Insulation System
National Metrological Verification Regulations of the People's Republic of China, temperature
- JJG 212-2003 Colour Temperature Meters
- JJG 985-2004 Reference Standard Facility of High Temperature Platinum Resistance Thermometers
- JJG 2030-1989 Verification Scheme of Measuring Instruments for Colour Temperature (Distribution Temperature)
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., temperature
US-VA, temperature
US-FCR, temperature
SAE - SAE International, temperature
CH-SNV, temperature
ZA-SANS, temperature
- SANS 5909:1979 Refractoriness under load (with rising temperature) of refractory bricks
EEMUA - Engineering Equipment and Materials Users Association, temperature
- PUB NO 192-1998 Guide for the Procurement of Valves for Low Temperature (Non-Cryogenic) Service
TIA - Telecommunications Industry Association, temperature
Liaoning Provincial Standard of the People's Republic of China, temperature
- DB21/T 3315-2020 Technical specification for heating and heat preservation of household biogas digesters
- DB21/T 2156-2013 Technical specifications for external thermal insulation of fire-proof and thermal insulation blocks
Gansu Provincial Standard of the People's Republic of China, temperature
ES-AENOR, temperature
YU-JUS, temperature
- JUS G.S0.052-1990 Rubber. General directions for achieving elevated or subnormal temperatures for test purposes
Professional Standard - Geology, temperature
- DZ/T 0064.3-2021 Groundwater Quality Analysis Methods Part 3: Determination of Temperature Thermometer (Pyrometer) Method
Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, temperature
- GJB 5517-2005 Specification for non-reversible multi-coloring temperature-indicating high temperation coatings
- GJB 1087A-2005 Specification for RT solidified inorganic adhesive for high temperature resistance
(U.S.) Telecommunications Industries Association , temperature
Professional Standard - Construction Industry, temperature
- JG/T 287-2013 The materials of external thermal insulation systems based on insulated decorative panel
Professional Standard - Petrochemical Industry, temperature
- SH/T 0376-1992 No. 4 high temperature grease (No. 50 high temperature grease)
Professional Standard - Aviation Industry, temperature
- Q/HBm 109-1994 High temperature and low temperature test methods for auto parts
Jiangsu Provincial Standard of the People's Republic of China, temperature
- DB32/T 4100-2021 Specifications for temperature setting of cucumber production in intelligent greenhouse
Engineering Equipment and Materials Users Association （EEMUA), temperature
廊坊市市场监督管理局, temperature
- DB1310/T 289-2022 Early warning level of low temperature chilling damage to tomatoes in solar greenhouses
石家庄市市场监督管理局, temperature
- DB1301/T 438-2022 Technical regulations for high temperature and stuffy greenhouses in solar greenhouses in summer
国家能源局, temperature
(U.S.) Ford Automotive Standards, temperature
CL-INN, temperature
FI-SFS, temperature
Professional Standard - Medicine, temperature
International Electrotechnical Commission (IEC), temperature
American Society of Mechanical Engineers (ASME), temperature
(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, temperature
Building Officials and Code Administrators International(U.S.), temperature
Institute of Interconnecting and Packaging Electronic Circuits (IPC), temperature
GM North America, temperature
Compressed Gas Association (U.S.), temperature
GB-REG, temperature
WRC - Welding Research Council, temperature
National Aeronautics and Space Administration (NASA), temperature
International Federation of Trucks and Engines, temperature
CN-STDBOOK, temperature
工业和信息化部, temperature
American Welding Society (AWS), temperature
- WRC 187:1973 High-Temperature Brazing
- WRC 575:2019 Revisiting the Bree Diagram: Derivation with Temperature Dependent Properties
Military Standards (MIL-STD), temperature
Professional Standard - Electron, temperature
- SJ 2028.2-1983 Positive temperature coefficient thermistors used for temperature control for Type MZ61
European Committee for Electrotechnical Standardization（CENELEC）, temperature
- EN 60751:2008 Industrial platinum resistance thermometers and platinum temperature sensors
CENELEC - European Committee for Electrotechnical Standardization, temperature
- EN 60751:1995 Industrial Platinum Resistance Thermometer Sensors (Incorporates Amendment A2: 1995)
Malaysia Standards, temperature
Professional Standard - Aviation, temperature
- HB 6744-1993 Test method for low temperature flexure of room temperature vulcanizing sealants
- HBm 60-1987 High-temperature and low-temperature test methods for instrumentation of miniature automobiles
工业和信息化部/国家能源局, temperature
- JB/T 13078-2017 Facility agricultural equipment greenhouse cooling paper wet curtain