ZH
RU
ES
super terrarium
super terrarium, Total:499 items.
In the international standard classification, super terrarium involves: Bottles. Pots. Jars, Packaging and distribution of goods in general, Glass, Measurement of volume, mass, density, viscosity, Equipment for the chemical industry, Surface treatment and coating, Capacitors, Analytical chemistry, Commercial vehicles, Screw threads, Cans. Tins. Tubes, Barrels. Drums. Canisters, Aerosol containers, Paper and board, Fluid storage devices, Conducting materials, Galvanic cells and batteries, Vocabularies, Pharmaceutics, Biology. Botany. Zoology, Microbiology, Rubber and plastics products, Electronic tubes, Mining equipment, Resistors, Aircraft and space vehicles in general, Medical equipment, Laboratory medicine, Materials and articles in contact with foodstuffs.
AENOR, super terrarium
- UNE 126102:2011 Glass containers. Dimensional relationships for a normal glass container.
- UNE 126101:2011 Glass containers. Glass terminology. General.
- UNE 126203:2008 Glass containers. Glass bottles Rhin type. General characteristics.
- UNE 126204:2002 Glass containers. Glass bottle Cava type. General characteristics.
- UNE 126201:2007 Glass containers. Glass bottles Bordeaux type. General characteristics.
- UNE 126202:2007 Glass containers. Glass bottles Borgo？a type. General characteristics.
- UNE-EN 14854:2006 Aerosol containers - Glass containers - Dimensions of the neck finish
- UNE 126205:2007 Glass containers. Glass bottles Sherry type. General characteristics.
- UNE 43714:1980 INTERNAL PRESSURE TEST ON GLASS CONTAINERS
- UNE 43715:1980 POLARISCOPIC EXAMINATION OF GLASS CONTAINERS
- UNE 126107:2001 Glass containers. Lixiviation. Test methods.
- UNE 126108:2005 Glass containers. Positioning notchs. Dimensional characterisitics.
- UNE-EN 14849:2006 Aerosol containers - Glass containers - Dimensions of aerosol valve ferrules
- UNE-EN 13311-3:2001 Biotechnology - Performance criteria for vessels - Part 3: Glass pressure vessels.
- UNE-EN ISO 648:2009 Laboratory glassware - Single-volume pipettes (ISO 648:2008)
- UNE-EN ISO 7458:2004 Glass containers - Internal pressure resistance - Test methods (ISO 7458:2004)
- UNE-EN ISO 8106:2005 Glass containers - Determination of capacity by gravimetric method - Test method (ISO 8106:2004)
RU-GOST R, super terrarium
CZ-CSN, super terrarium
SE-SIS, super terrarium
International Organization for Standardization (ISO), super terrarium
- ISO 9058:1992 Glass containers; tolerances
- ISO/DIS 4802-2 Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 2: Determination by flame spectrometry and classification
- ISO 4802-1:1988 Glassware; hydrolytic resistance of the interior surfaces of glass containers; part 1: determination by titration method and classification
- ISO 4787:1984 Laboratory glassware; Volumetric glassware; Methods for use and testing of capacity
- ISO 4802-2:1988 Glassware; hydrolytic resistance of the interior surfaces of glass containers; part 2: determination by flame spectrometry and classification
- ISO 4802:1982 Glass — Hydrolytic resistance of the interior surfaces of glass containers — Methods of test
- ISO 9058:2008 Glass containers - Standard tolerances for bottles
- ISO 8162:1985 Glass containers; Tall crown finishes; Dimensions
- ISO 8163:1985 Glass containers; Shallow crown finishes; Dimensions
- ISO 7458:2004 Glass containers - Internal pressure resistance - Test methods
- ISO 7458:1984 Glass containers; Internal pressure resistance; Test methods
- ISO 8164:1990 Glass containers; 520 ml Euro-form bottles; dimensions
- ISO 9056:1990 Glass containers; series of pilferproof finish; dimensions
- ISO 8106:2004 Glass containers - Determination of capacity by gravimetric method - Test method
- ISO 8106:1985 Glass containers; Determination of capacity by gravimetric method; Test method
- ISO 16496:2016 Laboratory glassware - Vacuum-jacketed vessels for heat insulation
- ISO 1042:1975 Title missing - Legacy paper document
- ISO 1042:1981 Title missing - Legacy paper document
- ISO 1042:1998 Laboratory glassware - One-mark volumetric flasks
- ISO 7348:1992 Glass containers; manufacture; vocabulary
- ISO/DIS 4802-1 Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 1: Determination by titration method and classification
- ISO 8113:2004 Glass containers - Resistance to vertical load - Test method
- ISO 648:2008 Laboratory glassware - Single-volume pipettes
- ISO 8113:1985 Glass containers; Resistance to vertical load; Test method
- ISO 9100:1992 Wide-mouth glass containers; vacuum lug finishes; dimensions
- ISO 4802-1:2010 Glassware - Hydrolytic resistance of the interior surfaces of glass containers - Part 1: Determination by titration method and classification
- ISO 4802-1:2016 Glassware - Hydrolytic resistance of the interior surfaces of glass containers - Part 1: Determination by titration method and classification
- ISO 7086-2:1982 Glassware and glass ceramic ware in contact with food; Release of lead and cadmium; Part 2 : Permissible limits
Korean Agency for Technology and Standards (KATS), super terrarium
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, super terrarium
- GB/T 21299-2007 Glass containers.Tolerances
- GB/T 24694-2009 Glass containers.Chinese spirits bottle
- GB/T 42413-2023 Test method for resistance to freezing of glassware and glass containers
- GB/T 21299-2015 Glass containers.Standard tolerances for bottles
- GB/T 12416.1-1990 Pharmaceutical glass containers--Hydrolytic resistance--Test method and classification
- GB/T 8452-1987 Glass containers--Vertical axis deviation of bottles test methods
- GB/T 23259-2009 Sight glass for pressure vessels
- GB/T 25026-2010 One piece glass-lined steel vessels with agitator
- GB/T 25027-2010 Two piece glass-lined steel vessels with agitator
- GB/T 4548.2-2003 Glassware-Hydrolytic resistance of the interior surfaces of glass containers-Determination by flame spectrometry and classification
- GB/T 4771-2015 Released alkali tests of glasses and glass containers for pharmaceutical preparations
- GB/T 4771-1984 Released alkali tests of glasses and glass containers for pharmaceutical preparations
- GB/T 12810-1991 Laboratory glassware--Volumetric galssware--Methods for use and testing of capacity
- GB/T 4548-1995 Test method and classification for hydrolytic resistance of the interior surfaces of glass containers
- GB/T 7996-2006 Norminal capacity and diameter of glass lined vessel
- GB/T 7996-2013 Norminal capacity and diameter of glass-lined equipment
- GB/T 7996-1987 Nominal volume and nominal diameter for glass-lined vessel
- GB/T 17449-1998 Packaging--Glass containers--Thread finish dimensions
- GB/T 4546-2008 Glass containers.Internal pressure resistance.Test methods
- GB/T 42387-2023 Technical requirements for quality classification of glass measuring vessels
- GB/T 6552-2015 Glass containers.Test method for impact resistance
- GB/T 12806-1991 Laboratory glassware-one-mark volumetric flasks
- GB/T 12415-1990 Pharmaceutical glass containers--Stress examination--Test methods
- GB/T 12806-2011 Laboratory glassware.One-mark volumetric flasks
- GB/T 12415-2015 Test method for internal stress of pharmaceutical glass containers
- GB/T 22934-2008 Glass containers.Resistance to vertical load.Test method
- GB/T 20858-2007 Glass containers Determination of capacity by gravimetric method Test method
- GB/T 35595-2017 Glass containers.Testing methods for arsenic and antimony release
- GB/T 21170-2007 Glass hollowware-Test method for lead and cadmium release
Professional Standard - Chemical Industry, super terrarium
Professional Standard - Light Industry, super terrarium
Group Standards of the People's Republic of China, super terrarium
工业和信息化部, super terrarium
国家发展和改革委员会, super terrarium
Professional Standard - Electron, super terrarium
- SJ 20029-1992 Specification for glass for glass dielectric trimmer capacitors
- SJ/T 11892-2023 General specifications for pseudocapacitive supercapacitors
- SJ/T 11894-2023 General specifications for marine supercapacitors
- SJ 1584-1980 Glass dielectric trimmer capacitors for Type CWB51
- SJ 1583-1980 General specification for glass dielectric trimmer capacitors
- SJ 2296-1983 Variable glass vacuum capacitors for Type CKBB400/7.5/40
- SJ 2764-1987 Fixed glass vacuum capacitors for Type CKB50/15/40
- SJ 2765-1987 Variable glass vacuum capacitors for Type CKBB750/10/75
Danish Standards Foundation, super terrarium
- DS/ISO 4802-1:2010 Glassware - Hydrolytic resistance of the interior surfaces of glass containers - Part 1: Determination by titration method and classification
- DS/EN 14854:2006 Aerosol containers - Glass containers - Dimensions of the neck finish
- DS/ISO 9058:2008 Glass containers - Standard tolerances for bottles
- DS/EN ISO 648:2008 Laboratory glassware - Single-volume pipettes
- DS/EN ISO 8106:2005 Glass containers - Determination of capacity by gravimetric method - Test method
- DS/EN ISO 1042:1999 Laboratory glassware - One-mark volumetric flasks
- DS/EN ISO 7458:2004 Glass containers - Internal pressure resistance - Test methods
- DS/EN 14849:2006 Aerosol containers - Glass containers - Dimensions of aerosol valve ferrules
- DS/EN ISO 8113:2004 Glass containers - Resistance to vertical load - Test method
- DS/EN ISO 4787:2011 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use
- DS/EN 13311-3:2001 Biotechnology - Performance criteria for vessels - Part 3: Glass pressure vessels
Professional Standard - Automobile, super terrarium
IET - Institution of Engineering and Technology, super terrarium
KR-KS, super terrarium
- KS L ISO 4787-2016 Laboratory glassware－Volumetric glassware－Methods for use and testing of capacity
- KS B ISO 4787-2007 Laboratory glassware－Volumetric glassware－Methods for use and testing of capacity
Taiwan Provincial Standard of the People's Republic of China, super terrarium
- CNS 14932-2005 Waste glass cullet as a raw material for manufacture of glass containers
- CNS 4228-1978 Finishes with External Screw Thread for Glass Containers
- CNS 993-1973 Method of Sampling for Glass Containers
- CNS 994-1973 Method of Intenal Pressure Test on Glass Containers
- CNS 2574-1975 Glass Containers for Food (General)
- CNS 2576-1966 Method of Test for Off-Roundness of Glass Containers for Food Storage
- CNS 995-1973 Method of Thermal Shock Test on Glass Containers
- CNS 2577-1972 Method of Test for Perpendicularity of Glass Containers
- CNS 2578-1972 Method of Test for Stability of Glass Containers
- CNS 996-1973 Method of Test for Resistance of Glass Containers to Chemical Attack
VN-TCVN, super terrarium
- TCVN 5513-1991 Glass containers for canned food products
- TCVN 1044-2007 Laboratory glassware.Volumetric glassware.Methods for use and testing of capacity
- TCVN 7307-2007 Glass containers.Internal pressure resistance.Test methods
- TCVN 326-1988 Laboratory volumetric glassware.Technical requirements
- TCVN 7151-2010 Laboratory glassware.Single-volume pipettes
- TCVN 7153-2002 Laboratory glassware.One-mark volumetric flasks
- TCVN 1044-2011 Laboratory glassware - Volumetric instruments Methods for testing of capacity and for use
- TCVN 7310-2007 Glass containers.Resistance to vertical load.Test method
British Standards Institution (BSI), super terrarium
Professional Standard-Packaging, super terrarium
PL-PKN, super terrarium
- PN O79714-1990 Glass containers VICHY-form bottles
- PN B13021-1990 Laboratory glassware Volumetric glassware Graduated pipettes
- PN B13027-1974 Labora?ory glassware Volumetric glassware Bang microburretfes
- PN B13023-1990 Laboratory glassware Volumetric glassware One-mark pipettes
- PN O79134-1971 Glass cantainers Systematics of testing
- PN G13170-1954 Glass Weiss vessel for fish hatchery
- PN B13014-1992 Laboratory glassware. Principles of design and construction of volumetric glassware
- PN B13018-1992 Laboratory glassware. Volumetric glassware. Methods for use and testing of capacity
- PN O79713-1989 Glass containers Internal pressure resistance Test methods
- PN O79715-1991 Glass containers for medicines. Vials for injectables
- PN O79712-1989 Glass containers Resistance to vertical load. Test method
- PN O79711-1989 Glass containers Determination of capacity by gravimetric method Test method
IN-BIS, super terrarium
未注明发布机构, super terrarium
Professional Standard - Agriculture, super terrarium
- GB 12416.1-1990 Water resistance test method and classification of pharmaceutical glass containers
- GB 8452-1987 Glass containers - test methods for vertical axis deviation of glass bottles
- GB 10809-1989 Glass container crown neck size
- GB 12806-1991 Laboratory Glass Instruments Single Marked Line Volumetric Flask
- GB 12415-1990 Test method for internal stress of pharmaceutical glass containers
Japanese Industrial Standards Committee (JISC), super terrarium
Association Francaise de Normalisation, super terrarium
- NF H44-052:2006 Aerosol containers - Glass containers - Dimensions of the neck finish.
- NF B35-309:1983 Laboratory glassware - Volumetric glassware - Methods for testing and use
- NF B35-300:1983 Laboratory glassware. Principles of design and construction of volumetric glassware.
- NF EN 14849:2006 Récipients pour aérosols - Récipients en verre - Dimensions des bagues de valves pour aérosols
- NF EN ISO 7458:2004 Récipients en verre - Résistance à la pression interne - Méthodes d'essai
- NF EN ISO 648:2008 Verrerie de laboratoire - Pipettes à un volume
- NF EN ISO 8106:2005 Récipients en verre - Détermination de la capacité par la méthode gravimétrique - Méthode d'essai
- NF H44-052*NF EN 14854:2021 Glass packaging - Dimensions of neck finishes for aerosol and spray glass containers
- NF H35-001*NF EN ISO 7458:2004 Glass containers - Internal pressure resistance - Test methods
- NF EN ISO 1042:2000 Verrerie de laboratoire - Fioles jaugées à un trait
- NF H35-003*NF EN ISO 8106:2005 Glass containers - Determination of capacity by gravimetric method - Test method
- NF H44-043*NF EN 14849:2006 Aerosol containers - Glass containers - Dimensions of aerosol valve ferrules
- NF H44-009:1986 Aerosols dispensers. Glass containers. Dimensions of finish 18 mm.
- NF H44-034:1986 Aerosols dispensers. Glass containers. Dimensions of finish 11 mm.
- NF H44-032:1986 Aerosols dispensers. Glass containers. Dimensions of finish 17 mm.
- NF H44-033:1986 Aerosols dispensers. Glass containers. Dimensions of finish 13 mm.
- NF H44-010:1986 Aerosols dispensers. Glass containers. Dimensions of finish 20 mm.
- NF EN ISO 8113:2004 Récipients en verre - Résistance à la charge verticale - Méthode d'essai
- NF EN 13311-3:2001 Biotechnologie - Critères de performance des récipients - Partie 3 : récipients sous pression en verre
- NF H44-008:1986 Aerosols dispensers. Glass containers. Dimensions of finish 15 mm.
- NF B35-040*NF EN ISO 16496:2016 Laboratory glassware - Vacuum-jacketed vessels for heat insulation
- NF H35-004*NF EN ISO 8113:2004 Glass containers - Resistance to vertical load - Test method
- NF H35-092:1991 Bottling industry. Wide-mouth glass containers (thead finish).
- NF H35-093:1991 Bottling industry. Wide-mouth glass containers (crimp finish).
- NF B30-108-1:1989 Glassware. Hydrolytic resistance of the interior surfaces of glass containers. Part 1 : determination by titration method and classification.
- NF X42-135*NF EN 13311-3:2001 Biotechnology - Performance criteria for vessels - Part 3 : glass pressure vessels.
- NF B30-108-2:1989 Glassware. Hydrolytic resistance of the interior surfaces of glass containers. Part 2 : determination by flame spectrometry and classification.
- NF EN ISO 16496:2016 Verrerie de laboratoire - Récipients à double enveloppe à vide pour isolation thermique
- NF H00-061:1980 Packages for certain pre-packed foodstuffs. Capacities of glass and metal containers.
European Committee for Standardization (CEN), super terrarium
- EN 14854:2005 Aerosol containers - Glass containers - Dimensions of the neck finish
- EN 14854:2021 Glass packaging - Dimensions of neck finishes for aerosol and spray glass containers
- EN 14849:2005 Aerosol containers - Glass containers - Dimensions of aerosol valve ferrules
- EN ISO 1042:1999 Laboratory Glassware - One-Mark Volumetric Flasks
- EN ISO 648:2008 Laboratory glassware - Single-volume pipettes (ISO 648:2008)
- EN 13311-3:2001 Biotechnology - Performance Criteria for Vessels - Part 3: Glass Pressure Vessels
- EN 76:1978 Packages for certain pre-packed foodstuffs capacities of glass and metal containers
Lithuanian Standards Office , super terrarium
- LST EN 14854-2006 Aerosol containers - Glass containers - Dimensions of the neck finish
- LST EN 14849-2006 Aerosol containers - Glass containers - Dimensions of aerosol valve ferrules
- LST EN 13311-3-2002 Biotechnology - Performance criteria for vessels - Part 3: Glass pressure vessels
- LST EN ISO 648:2009 Laboratory glassware - Single-volume pipettes (ISO 648:2008)
- LST EN ISO 8106:2005 Glass containers - Determination of capacity by gravimetric method - Test method (ISO 8106:2004)
ZA-SANS, super terrarium
- SANS 4787:1984 Laboratory glassware - Volumetric glassware - Methods for use and testing of capacity
- SANS 5010:1975 Limit of alkalinity of glass containers for pharmaceutical products
- SANS 112:2009 Laboratory glassware - Single-volume pipettes
RO-ASRO, super terrarium
YU-JUS, super terrarium
- JUS M.Z2.902-1984 uiaacontainers tor tooa mdustry. Glaudomjrm — Tvvist - off
- JUS Z.M5.060-1979 Glass containers for food industry. Gtassjars 370 ml Oosure P. T
- JUS Z.M5.058-1979 Glass containers for food industij. Glassjars 370ml Cio sure P.T
- JUS Z.M5.062-1979 Glass containers for food industry. Glassjars 720 ml. ClosureP.T
- JUS Z.M5.061-1979 Glass containers for food industry. Glassjars370 ml. Closure T.O
- JUS Z.M5.065-1979 Glass containers for food industry. Glassjars 2500 ml. Gosure T.O
- JUS Z.M5.057-1979 Glass containers for food industry. Glass jars 200 ml. Cbsure T.O
- JUS Z.M5.059-1979 Glass containers for food industry. Glassjars 370 ml Cbsure T.0
- JUS Z.M5.063-1979 Glass containers for food industry. Glassjars 720 mi Closure T.O
- JUS Z.M5.056-1979 Glass containers for food industrv. Glassjars 200 ml Cbsure P. T
- JUS Z.M5.055-1979 Glass containers for food industry. Glassjars 100 ml Cbsure T.O
- JUS Z.M5.054-1979 Glass containers for food industry. Gkssjars 100 ml. Cbsure P.T
- JUS Z.M5.064-1979 Glasscontainersforfoodindustry. Glassjars2500ml ClosureP.T
- JUS B.E8.125-1988 Glass for laboratory and pharmaceutical use. Ejdrolitic resistance of the interior surfaces of glass containers. Hethods of test and classiflcation
- JUS M.Z2.901-1980 Glasscontainersforfoodindustry.Capsforjars. Cap P. T
- JUS B.E8.100-1987 Glass containers. Interna! pressure resistance. Test methods
- JUS Z.M5.118-1980 Glass container s for food industry. Quality control
- JUS M.Z2.902-1980 Glass containers for food industr/. Caps forjars. Cap T. O
- JUS B.E4.350-1987 Laboratory glassvvare. General quality reguirements of design and construction of volumetric glassvvare
PK-PSQCA, super terrarium
- PS 341-1963 Glass Container for the preserved Fruit Industry
American Society for Testing and Materials (ASTM), super terrarium
- ASTM C224-78(2004)e1 Standard Practice for Sampling Glass Containers
- ASTM E708-79(1999) Standard Specification for Waste Glass as a Raw Material for the Manufacture of Glass Containers
- ASTM E708-79(2017) Standard Specification for Waste Glass as a Raw Material for the Manufacture of Glass Containers
- ASTM C224-78(1999) Standard Practice for Sampling Glass Containers
- ASTM C224-78(2020) Standard Practice for Sampling Glass Containers
- ASTM E688-94(2006) Standard Test Methods for Waste Glass as a Raw Material for Glass Manufacturing
- ASTM C149-86(2005) Standard Test Method for Thermal Shock Resistance of Glass Containers
- ASTM C224-78(2009) Standard Practice for Sampling Glass Containers
- ASTM F2179-02(2007) Standard Specification for Annealed Soda-Lime-Silicate Glass Containers That Are Produced for Use as Candle Containers
- ASTM F2179-02 Standard Specification for Annealed Soda-Lime-Silicate Glass Containers That Are Produced for Use as Candle Containers
- ASTM C224-78(2014) Standard Practice for Sampling Glass Containers
- ASTM C147-86(2010) Standard Test Methods for Internal Pressure Strength of Glass Containers
- ASTM C149-86(2010) Standard Test Method for Thermal Shock Resistance of Glass Containers
- ASTM C225-85(2004) Standard Test Methods for Resistance of Glass Containers to Chemical Attack
- ASTM C147-86(1995) Standard Test Methods for Internal Pressure Strength of Glass Containers
- ASTM C148-00(2006) Standard Test Methods for Polariscopic Examination of Glass Containers
- ASTM C148-00 Standard Test Methods for Polariscopic Examination of Glass Containers
- ASTM C147-86(2005) Standard Test Methods for Internal Pressure Strength of Glass Containers
German Institute for Standardization, super terrarium
- DIN 12605:2013 Laboratory glassware - Weighing vessels
- DIN 12605:2013-03 Laboratory glassware - Weighing vessels
- DIN EN 17829:2022-04 Glass packaging - 28 millimetre-screw finishes for glass containers (MCA range) - Dimensions; German and English version prEN 17829:2022 / Note: Date of issue 2022-03-04*Intended as replacement for DIN EN 16287-1 (2014-07), DIN EN 16287-2 (2014-07), DI...
- DIN EN 14854:2020 Glass packaging - Dimensions of neck finishes for aerosol and spray glass containers; German and English version prEN 14854:2020
- DIN EN 14854:2022-01 Glass packaging - Dimensions of neck finishes for aerosol and spray glass containers; German version EN 14854:2021
- DIN 28005-2:2001 General tolerances for vessels - Part 2: Glass lined vessels
- DIN 28005-2:2017 General tolerances for vessels - Part 2: Glass lined vessels
- DIN 28005-2:2017-04 General tolerances for vessels - Part 2: Glass lined vessels
- DIN EN ISO 7458:2004-05 Glass containers - Internal pressure resistance - Test methods (ISO 7458:2004); German version EN ISO 7458:2004
- DIN EN ISO 648:2009-01 Laboratory glassware - Single-volume pipettes (ISO 648:2008); German version EN ISO 648:2008
- DIN ISO 384:1978 Laboratory Glassware; Principes of Design and Construction of Volumetric Glassware
- DIN 6129-2:1999 Means of packaging - Bottles and hollow-ware from glass - Part 2: Volumes
- DIN 6129-2:2014 Means of packaging - Bottles and hollow-ware made of glass - Part 2: Volumes
- DIN EN ISO 1042:1999-08 Laboratory glassware - One-mark volumetric flasks (ISO 1042:1998); German version EN ISO 1042:1999
- DIN 12420:1981 Laboratory glassware; Dean and Stark distillation receiver
- DIN 28006-2:2017 General tolerances for agitator vessels - Part 2: Glass lined agitator vessels
- DIN 28006-2:2001 General tolerances for agitator vessels - Part 2: Glass lined agitator vessels
- DIN EN 14849:2006-02 Aerosol containers - Glass containers - Dimensions of aerosol valve ferrules; German version EN 14849:2005
- DIN EN ISO 8106:2005 Glass containers - Determination of capacity by gravimetric method - Test method (ISO 8106:2004); German version EN ISO 8106:2004
- DIN EN ISO 8113:2004 Glass containers - Resistance to vertical load - Test method (ISO 8113:2004); German version EN ISO 8113:2004
- DIN 6106:2017-11 Packaging - Glass containers - Side and base bosses
- DIN EN ISO 8113:2004-05 Glass containers - Resistance to vertical load - Test method (ISO 8113:2004); German version EN ISO 8113:2004
- DIN EN 17829:2022 Glass packaging - 28 millimetre-screw finishes for glass containers (MCA range) - Dimensions; German and English version prEN 17829:2022
- DIN 28006-2:2017-04 General tolerances for agitator vessels - Part 2: Glass lined agitator vessels
- DIN EN ISO 8106:2005-02 Glass containers - Determination of capacity by gravimetric method - Test method (ISO 8106:2004); German version EN ISO 8106:2004
- DIN EN 13311-3:2001 Biotechnology - Performance criteria for vessels - Part 3: Glass pressure vessels; German version EN 13311-3:2001
- DIN EN 13311-3:2001-06 Biotechnology - Performance criteria for vessels - Part 3: Glass pressure vessels; German version EN 13311-3:2001
- DIN 6106:2017 Packaging - Glass containers - Side and base bosses
- DIN EN ISO 7458:2004 Glass containers - Internal pressure resistance - Test methods (ISO 7458:2004); German version EN ISO 7458:2004
- DIN EN ISO 648:2009 Laboratory glassware - Single-volume pipettes (ISO 648:2008); English version of DIN EN ISO 648:2009-01
- DIN 6106:2011 Packaging - Glass containers - Side and base bosses
- DIN EN 14854:2022 Glass packaging - Dimensions of neck finishes for aerosol and spray glass containers; German version EN 14854:2021
国家市场监督管理总局、中国国家标准化管理委员会, super terrarium
PT-IPQ, super terrarium
ES-UNE, super terrarium
- UNE-EN 14854:2022 Glass packaging - Dimensions of neck finishes for aerosol and spray glass containers
- ISO/PRF 4802-1:2023 Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 1: Determination by titration method and classification
- ISO/PRF 4802-2:2023 Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 2: Determination by flame spectrometry and classification
IT-UNI, super terrarium
TR-TSE, super terrarium
Professional Standard - Electricity, super terrarium
CU-NC, super terrarium
- NC 97-58-1985 Packaging. Glass Containers Determination of Deformations
- NC 46-02-1985 Glass. Pressed Vessels. General Quality Specifications
- NC 97-67-1985 Packaging. Glass Containers for Drugs. General Quality Specifications
- NC 97-62-1985 Packaging. Glass Containers Determination of Axial Load Strenght
- NC 97-19-1988 Packing and Packaqing. Glass Container Finishing Terms and Definitions
AT-ON, super terrarium
BELST, super terrarium
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, super terrarium
Professional Standard - Commodity Inspection, super terrarium
Hubei Provincial Standard of the People's Republic of China, super terrarium
- DB42/T 1471-2018 Specifications for packaging, storage and transportation of glass containers
NATO - North Atlantic Treaty Organization, super terrarium
- ANEP 45-1994 Electro-Magnetic Compatibility (EMC) in Glass Reinforced Plastic (GRP) Vessels (ED 1; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2 – 707 5556@ emai
Heilongjiang Provincial Standard of the People's Republic of China, super terrarium
ECIA - Electronic Components Industry Association, super terrarium
- IS-39-1987 Ceramic Dielectric Axial Capacitors (Glass Encapsulated)
GOSTR, super terrarium
- GOST 32671-2020 Glass packaging for baby's nutrition. General specifications
- GOST 13904-2019 Glass packing. Methods of testing the resistance to internal hydrostatic pressure
Henan Provincial Standard of the People's Republic of China, super terrarium
- DB41/T 1880-2019 Specification for periodic inspection of glass-lined pressure vessels
- DB41/T 1882-2019 Specification for supervision and inspection of glass-lined pressure vessels
Defense Logistics Agency, super terrarium
国家煤矿安全监察局, super terrarium
U.S. Military Regulations and Norms, super terrarium
Military Standard of the People's Republic of China-General Armament Department, super terrarium
- GJB 728-1989 General specification for glass dielectric trimmer variable capacitors
DE-GPVA, super terrarium
TH-TISI, super terrarium
- TIS 501-2003 Test methods for chemical resistance of pharmaceutical glass containers
Professional Standard - Building Materials, super terrarium
- JC 586-1995 Thermosetting fiberglass reinforced plastic food container