ZH
RU
ES

What are the four

What are the four, Total:75 items.

In the international standard classification, What are the four involves: Farming and forestry, Special purpose vehicles, Environmental protection, Packaging and distribution of goods in general, Laboratory medicine, Rubber, Motor cycles and mopeds, Building accessories, Rubber and plastics products, Construction materials, Insulating materials, Wood technology processes, Road vehicle systems, Medical equipment, Protective equipment, Printed circuits and boards, Electronic component assemblies.

Association Francaise de Normalisation, What are the four

FD CR 13695-1:2000 Emballage - Exigences pour la mesure et la vérification des quatre métaux lourds et autres substances dangereuses présents dans l'emballage et leur cession dans l'environnement - Partie 1 : exigences pour la mesure et la vérification des quatre m...
FD H60-150*FD CR 13695-1:2000 Packaging - Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging in their release into the environment - Part 1 : requirements for measuring and verifying the four heavy metals present in packa
NF S52-512*NF EN 15997:2012 All terrain vehicles (ATVs - Quads) - Safety requirements and test methods.
FD P85-210-3-2002 This document is intended for the exclusive and non collective use of AFNOR SAGAWEB.(Standards on line) customers. All network exploitation,reproduction and re-dissemination,even partial,whatever the form(hardcopy or other media), is strictly prohibited.
NF S76-035*NF EN 12942:1998 Respiratory protective devices. Power assisted filtering devices incorporating full face masks, half masks or quarter masks. Requirements, testing, marking.
NF S76-035/A1*NF EN 12942/A1:2003 Respiratory protective devices - Power assisted filtering devices incorporating full face masks, half masks or quarter masks - Requirements, testing, marking
NF S76-035/A2*NF EN 12942/A2:2009 Respiratory protective devices - Power assisted filtering devices incorporating full face masks, half masks or quarter masks - Requirements, testing, marking
NF C93-643-240:1993 Specification for flexible insulating sleeving. Part 3 : specification requirements for individual types of sleeving. Sheets 240 to 243 : heat-shrinkable ptfe sleeving.
FD CEN/TR 13695-2:2005 Emballage - Exigences pour la mesure et la vérification des quatre métaux lourds et autres substances dangereuses présents dans l'emballage et leur cession dans l'environnement - Partie 2 : exigences pour la mesure et la vérification des substanc...
FD H60-151*FD CEN/TR 13695-2:2005 Packaging - Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging, and their release into the environment - Part 2 : requirements for measuring and verifying dangerous substances present in pack
NF C93-643-400*NF EN 60684-3-400 A 402:2003 Flexible insulating sleeving - Part 3 : specification requirements for individual types of sleeving - Sheets 400 to 402 : glass textile sleeving with silicone elastomer coating

Sichuan Provincial Standard of the People's Republic of China, What are the four

DB51/T 705-2023 Seedling quality classification of main afforestation tree species in Sichuan

US-CFR-file, What are the four

CFR 33-150.10-2013 Navigation and navigable waters. Part150:Deepwater ports: operations. Section150.10:What are the general requirements for operations manuals?
CFR 40-80.1453-2013 Protection of Environment. Part80:Regulation of fuels and fuel additives.Section80.1453:What are the product transfer document (PTD) requirements for the RFS program?
CFR 21-4.3-2013 Food and Drugs. Part4:Regulation of combination products. Section4.3:What current good manufacturing practice requirements apply to my combination product?
CFR 50-23.18-2014 Wildlife and fisheries. Part23:Convention on international trade in endangered species of wild fauna and flora (cites). Section23.18:What CITES documents are required to export Appendix-I wildlife?
CFR 50-23.19-2014 Wildlife and fisheries. Part23:Convention on international trade in endangered species of wild fauna and flora (cites). Section23.19:What CITES documents are required to export Appendix-I plants?
CFR 30-585.627-2014 Mineral Resources. Part585:Renewable energy and alternate uses of existing facilities on the outer continental shelf. Section585.627:What information and certificationsmust I submit with my COP to assist the BOEM in complying with NEPA and other relevan
CFR 30-585.611-2014 Mineral Resources. Part585:Renewable energy and alternate uses of existing facilities on the outer continental shelf. Section585.611:What information and certifications must I submit with my SAP to assist BOEM in complying with NEPA and other relevant law
CFR 30-585.646-2014 Mineral Resources. Part585:Renewable energy and alternate uses of existing facilities on the outer continental shelf. Section585.646:What information and certificationsmust I submit with my GAPto assist BOEM in complying withNEPA and other relevant
CFR 40-63.144-2014 Protection of Environment. Part63:National emission standards for hazardous air pollutants for source categories. Section63.144:Process wastewater provisions—test methods and procedures for determining applicability and Group 1/Group 2 determinations (det

Yunnan Provincial Standard of the People's Republic of China, What are the four

DB53/T 100.2-2002 Simao Organic Tea Comprehensive Standard Part 2: Main Planting Varieties of Simao Organic Tea
DB5331/T 41-2023 Technical specifications for age classes and age group division of main tree species in non-state-owned artificial timber forests in Dehong Prefecture

Professional Standard - Agriculture, What are the four

SN/T 3788-2014 Determination of four organochlorine pesticides in textiles for import and export by gas chromatography

国家质量监督检验检疫总局, What are the four

SN/T 4979-2017 Inspection and quarantine requirements for toxic and harmful weed seeds in agricultural products

British Standards Institution (BSI), What are the four

PD CR 13695-1:2000 Packaging. Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging and their release into the environment. Requirements for measuring and verifying the four heavy metals present in packaging
BS PD CR 13695-1:2000 Packaging — Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging and their release into the environment Part 1: Requirements for measuring and verifying the four heavy metals presen
BS EN 13126-1:2006 Building hardware - Requirements and test methods for windows and doors height windows - Part 1: Requirements common to all types of hardware
BS EN 60684-3-240 to 243:2002 Specification for flexible insulating sleeving - Specification requirements for individual types of sleeving - Heat-shrinkable PTFE sleeving
BS ISO 27186:2013 Active implantable medical devices. Four-pole connector system for implantable cardiac rhythm management devices. Dimensional and test requirements
BS ISO 27186:2020 Active implantable medical devices. Four-pole connector system for implantable cardiac rhythm management devices. Dimensional and test requirements
BS EN 60684-3-400 to 402:2002 Specification for flexible insulating sleeving - Specification requirements for individual types of sleeving - Glass textile sleeving with silicone elastomer coating
20/30397032 DC BS ISO 27186. Active implantable medical devices. Four-pole connector system for implantable cardiac rhythm management devices. Dimensional and test requirements
BS EN 60684-3-403 to 405:2002 Specification for flexible insulating sleeving - Specification requirements for individual types of sleeving - Glass textile sleeving with acrylic based coating - Glass textile sleeving with acrylic coating

RU-GOST R, What are the four

GOST R 54314-2011 Special vehicles with multifunctional facilities. General technical requirements

CEN - European Committee for Standardization, What are the four

PD CR 13695-1-2000 Packaging - Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging and their release into the environment - Part 1: Requirements for measuring and verifying the four heavy metals present in packa
PD CEN/TR 13695-2:2019 Tracked Changes. Packaging. Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging, and their release into the environment. Requirements for measuring and verifying dangerous substances presen...

Danish Standards Foundation, What are the four

DS/CEN/CR 13695-1:2000 Packaging - Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging and their release into the environment - Part 1: Requirements for measuring and verifying the four heavy metals present in packa
DS/ISO 27186:2021 Active implantable medical devices – Four-pole connector system for implantable cardiac rhythm management devices – Dimensional and test requirements
DS/CEN/TR 13695-2:2005 Packaging - Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging, and their release into the environment - Part 2: Requirements for measuring and verifying dangerous substances present in packa

AENOR, What are the four

UNE-CR 13695-1:2001 Packaging. Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging and their release into the environment. Part 1: Requirements for measuring and verifying the four heavy metals present in packagi
UNE-CEN/TR 13695-2:2006 Packaging - Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging, and their release into the environment - Part 2: Requirements for measuring and verifying dangerous substances present in packa

American Society for Testing and Materials (ASTM), What are the four

ASTM D7427-16(2021) Standard Test Method for Immunological Measurement of Four Principal Allergenic Proteins (Hev b 1, 3, 5 and 6.02) in Hevea Natural Rubber and Its Products Derived from Latex
ASTM D7427-08 Standard Test Method for Immunological Measurement of Four Principal Allergenic Proteins (Hev b 1, 3, 5 and 6.02) in Natural Rubber and Its Products Derived from Latex
ASTM D7427-16 Standard Test Method for Immunological Measurement of Four Principal Allergenic Proteins (Hev b 1, 3, 5 and 6.02) in Hevea Natural Rubber and Its Products Derived from Latex
ASTM D7427-14 Standard Test Method for Immunological Measurement of Four Principal Allergenic Proteins &40;Hev b 1, 3, 5 and 6.02&41; in Natural Rubber and Its Products Derived from Latex
ASTM D7427-08e2 Standard Test Method for Immunological Measurement of Four Principal Allergenic Proteins (Hev b 1, 3, 5 and 6.02) in Natural Rubber and Its Products Derived from Latex

German Institute for Standardization, What are the four

DIN 1164-10:2023-02 Special cement - Part 10: Cement with low effective alkali content - Composition and requirements
DIN 1164-12:2005 Special cement - Part 12: Composition, specification and conformity evaluation for cement with higher quantity of organic constituents
DIN 40738:1991-01 Lead storage batteries; stationary cells with positive plante plates, narrow plate distance; rated capacities, main dimensions
DIN EN 61188-5-6:2003 Printed boards and printed board assemblies - Design and use - Part 5-6: Attachment (land/joint) considerations; Chip carriers with J-leads on four sides (IEC 61188-5-6:2003); German version EN 61188-5-6:2003
DIN EN 13126-1:2012 Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 1: Requirements common to all types of hardware; German version EN 13126-1:2011
DIN CEN/TR 13695-2:2020-07 Packaging - Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging, and their release into the environment - Part 2: Requirements for measuring and verifying dangerous substances present in pa...

ES-UNE, What are the four

UNE 142405-4:2020 Fertilizers products. Requirements for labelling of fertilizers different from CE fertilizers. Part 4: Other fertilizers and special products.
UNE-CEN/TR 13695-2:2020 IN:2020 Packaging - Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging, and their release into the environment - Part 2: Requirements for measuring and verifying dangerous substances present in pa...

International Organization for Standardization (ISO), What are the four

ISO 15170-2:2001/cor 1:2013 Road vehicles - Four-pole electrical connectors with pins and twist lock - Part 2: Tests and requirements; Technical Corrigendum 1
ISO/CD 27186 Active implantable medical devices — Four-pole connector system for implantable cardiac rhythm management devices — Dimensional and test requirements
ISO 27186:2010 Space systems - Programme management - Quality assurance requirements
ISO 27186:2020 Active implantable medical devices - Four-pole connector system for implantable cardiac rhythm management devices - Dimensional and test requirements

IN-BIS, What are the four

Hunan Provincial Standard of the People's Republic of China, What are the four

DB43/T 800.1-2013 Organic Tea Export Planting Base Safety and Quality Control Technical Regulations Part 1: Basic Requirements

国家食品药品监督管理局, What are the four

YY/T 0972-2016 Dimensions and test requirements for four-pole connector systems for active implantable medical devices and implantable cardiac rhythm regulation devices

American National Standards Institute （ANSI), What are the four

ANSI/AAMI/ISO 27186:2010 Active implantable medical devices - Four-pole connector system for implantable cardiac rhythm management devices - Dimensional and test requirements

SE-SIS, What are the four

SIS SS-EN 147-1991 Respiratory protective devices — Power assisted particle filtering devices incorporating full face masks, half masks or quarter masks — Requirements, testing and marking

European Committee for Electrotechnical Standardization（CENELEC）, What are the four

HD 523.3.240 TO 243 S1-1993 Specification for Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving Sheets 240 to 243: Heat-Shrinkable PTFE Sleeving

RO-ASRO, What are the four

STAS 9617/5-1980 Pneumatic drives THREE AND FOUR POSITION DIRECTIONAL VALVES WITH MANUAL, PEDAL AND MECHA- NICAL CONTROL WITHOUT DETENT Types and main dimensions

ZA-SANS, What are the four

SANS 12942:1998 Respiratory protective devices - Power assisted filtering devices incorporating full face masks, half masks or quarter masks - Requirements, testing, marking

International Electrotechnical Commission (IEC), What are the four

IEC 60684-3-240 to 243:1991 Specification for flexible insulating sleeving; part 3: specification requirements for individual types of sleeving; sheets 240 to 243: heat-shrinkable PTFE sleeving

European Committee for Standardization (CEN), What are the four

prHD 523.3.240 bis 243 S1-1992 Specification for flexible insulating sleeving; part 3: specification requirements for individual types of sleeving; sheets 240 to 243: heat-shrinkable PTFE sleeving (IEC 684-3-240 to 243:1991)
PD CEN/TR 13695-2:2004 Packaging - Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging, and their release into the environment - Part 2: Requirements for measuring and verifying dangerous substances present in packa

Korean Agency for Technology and Standards (KATS), What are the four

KS C IEC 61188-5-5:2009 Printed boards and printed board assemblies-Design and use-Part 5-5:Attachment (land/joint) considerations-Components with gull-wing leads on four sides
KS C IEC 61188-5-5:2013 Printed boards and printed board assemblies－Design and use－Part 5-5：Attachment (land/joint) considerations－Components with gull-wing leads on four sides
KS C IEC 61188-5-6:2009 Printed boards and printed board assemblies &##8211; Design and use-Part 5-6:Attachment(land/joint) considerations-Chip carriers with J-leads on four sides
KS C IEC 61188-5-6:2013 Printed boards and printed board assemblies ? Design and use－Part 5-6：Attachment(land/joint) considerations－Chip carriers with J-leads on four sides