ZH
RU
ES

Auto Calibration Method Gas

Auto Calibration Method Gas, Total:286 items.

In the international standard classification, Auto Calibration Method Gas involves: Analytical chemistry, Geology. Meteorology. Hydrology, Metrology and measurement in general, Fluid power systems, Measurement of volume, mass, density, viscosity, Air quality, Equipment for petroleum and natural gas industries, Products of the chemical industry, Road vehicle systems, Petroleum products in general, Valves, Burners. Boilers, Medical equipment, Measurement of fluid flow, Protection against fire, Earthworks. Excavations. Foundation construction. Underground works, Pipeline components and pipelines, Lubricants, industrial oils and related products, Radiation measurements, Thermodynamics and temperature measurements, Fuels, Hydraulic fluids, Protective equipment.

British Standards Institution (BSI), Auto Calibration Method Gas

BS EN ISO 6145-1:2004 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Methods of calibration
BS EN ISO 6145-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Methods of calibration
BS EN ISO 6145-1:2019 Gas analysis. Preparation of calibration gas mixtures using dynamic methods - General aspects
BS EN ISO 6145-10:2002 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Permeation method
BS EN ISO 6145-10:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Permeation method
BS EN ISO 6145-5:2010 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Capillary calibration devices
BS EN ISO 6145-6:2017 Gas analysis. Preparation of calibration gas mixtures using dynamic methods. Critical flow orifices
20/30408159 DC BS ISO 11943. Hydraulic fluid power. Online automatic particle-counting systems for liquids. Methods of calibration and validation
BS EN ISO 6145-8:2005 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Diffusion method
BS EN ISO 6145-8:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Diffusion method
BS EN ISO 6145-6:2003 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Critical orifices
BS EN ISO 6145-6:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Critical orifices
BS ISO 6145-2:2014 Gas analysis. Preparation of calibration gas mixtures using dynamic methods. Piston pumps
BS ISO 11943:2021 Tracked Changes. Hydraulic fluid power. Online automatic particle-counting systems for liquids. Methods of calibration and validation
BS ISO 11943:1999 Hydraulic fluid power - On-line automatic particle-counting systems for liquids - Methods of calibration and validation
BS ISO 11943:2018 Hydraulic fluid power. Online automatic particle-counting systems for liquids. Methods of calibration and validation
BS EN ISO 6145-11:2006 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Electrochemical generation
BS EN ISO 6145-11:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 11:Electrochemical generation
BS EN ISO 6145-4:2005 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Continuous syringe injection method
BS EN ISO 6145-4:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Continuous syringe injection method
BS EN ISO 6145-7:2018 Tracked Changes. Gas analysis. Preparation of calibration gas mixtures using dynamic methods. Thermal mass-flow controllers
BS ISO 6145-7:2009 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Thermal mass-flow controllers
BS EN ISO 6145-7:2010 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Thermal mass-flow controllers
20/30419851 DC BS ISO 12963 AMD1. Gas analysis. Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration
BS EN 14662-3:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Automated pumped sampling with in situ gas chromatography
BS 5540-6:1990 Evaluating particulate contamination of hydraulic fluids - Method of calibrating liquid automatic particle-count instruments (using mono-sized latex spheres)
BS EN 14662-3:2015 Tracked Changes. Ambient air. Standard method for the measurement of benzene concentrations. Automated pumped sampling with in situ gas chromatography

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Auto Calibration Method Gas

GB/T 5275.1-2014 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 1:Methods of calibration
GB/T 5275.5-2014 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 5:Capillary calibration devices
GB/T 21540-2022 Hydraulic fluid power—On-line automatic particle-counting systems for liquids—Methods of calibration and validation
GB/T 21540-2008 Hydraulic fluid power.On-line automatic particle-counting systems for liquids.Methodsof calibration and validation
GB/T 5275.10-2009 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 10:Permeation method
GB/T 5275.8-2014 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 8:Diffusion method
GB/T 5275.9-2014 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 9:Saturation method
GB/T 5275.4-2014 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 4:Continuous syringe injection method
GB/T 5275.2-2022 Gas analysis—Preparation of calibration gas mixtures using dynamic methods—Part 2: Piston pumps
GB/T 5275.2-2014 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 2:Volumetric pumps
GB/T 5275.11-2014 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 11:Electrochemical generation
GB/T 5275.6-2014 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 6:Gritical orifices
GB/T 5275.6-2023 Preparation of gas mixtures for calibration by dynamic method of gas analysis - Part 6: Critical flow orifice
GB/T 5275.7-2014 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 7:Thermal mass-flow controllers

European Committee for Standardization (CEN), Auto Calibration Method Gas

EN ISO 6145-1:2019 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 1: General aspects (ISO 6145-1:2019)
EN ISO 6145-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration (ISO 6145-1:2003)
EN ISO 6145-8:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8: Diffusion method (ISO 6145-8:2005)
EN ISO 6145-5:2010 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices (ISO 6145-5:2009)
EN ISO 6145-10:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10: Permeation method (ISO 6145-10:2002)
EN ISO 6145-6:2017 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 6: Critical flow orifices
EN ISO 6145-6:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 6: Critical orifices (ISO 6145-6:2003)
EN ISO 6145-11:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 11: Electrochemical generation
EN ISO 6145-4:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 4: Continuous syringe injection method (ISO 6145-4:2004)
EN ISO 6145-7:2010 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2009)
EN 14662-3:2005 Ambient Air Quality - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography
EN 14662-3:2015 Ambient air - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography

German Institute for Standardization, Auto Calibration Method Gas

DIN EN ISO 6145-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration (ISO 6145-1:2003); English version of DIN EN ISO 6145-1:2008-11
DIN EN ISO 6145-8:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8: Diffusion method (ISO 6145-8:2005); English version of DIN EN ISO 6145-8:2008-11
DIN EN ISO 6145-1:2020-02 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 1: General aspects (ISO 6145-1:2019); German version EN ISO 6145-1:2019
DIN EN ISO 6145-5:2011-03 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices (ISO 6145-5:2009); German version EN ISO 6145-5:2010
DIN EN ISO 6145-1:2020 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 1: General aspects (ISO 6145-1:2019)
DIN EN ISO 6145-10:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10: Permeation method (ISO 6145-10:2002); English version of DIN EN ISO 6145-10:2008-11
DIN EN ISO 6143:2006-11 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures (ISO 6143:2001); German version EN ISO 6143:2006
DIN EN ISO 6145-6:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 6: Critical orifices (ISO 6145-6:2003); English version of DIN EN ISO 6145-6:2008-11
DIN EN ISO 6145-11:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 11: Electrochemical generation (ISO 6145-11:2005); English version of DIN EN ISO 6145-11:2008-11
DIN 51898-1:2014-05 Gas analysis - Absolute volumetric method for dynamic preparation of calibration gases - Part 1: Preparation from pure gases, with CD-ROM / Note: CD-ROM enclosed
DIN 51898-2:2017-10 Gas analysis - Absolute volumetric method for dynamic preparation of calibration gases - Part 2: Preparation from gas mixtures
DIN EN ISO 6145-6:2017 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 6: Critical flow orifices (ISO 6145-6:2017)
DIN 51898-1:2014 Gas analysis - Absolute volumetric method for dynamic preparation of calibration gases - Part 1: Preparation from pure gases, with CD-ROM
DIN EN ISO 6145-6:2017-12 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 6: Critical flow orifices (ISO 6145-6:2017); German version EN ISO 6145-6:2017
DIN EN ISO 6145-4:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 4: Continuous syringe injection method (ISO 6145-4:2004); English version of DIN EN ISO 6145-4:2008-11
DIN EN ISO 6145-10:2008-11 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10: Permeation method (ISO 6145-10:2002); German version EN ISO 6145-10:2008
DIN EN ISO 6145-9:2011-03 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9: Saturation method (ISO 6145-9:2009); German version EN ISO 6145-9:2010
DIN EN ISO 6145-8:2008-11 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8: Diffusion method (ISO 6145-8:2005); German version EN ISO 6145-8:2008
DIN EN ISO 6145-7:2019 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2018)
DIN CEN ISO/TS 21805:2019-07*DIN SPEC 14039:2019-07 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2018); German version EN ISO 6145-7:2018
DIN EN ISO 6145-7:2019-07 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2018); German version EN ISO 6145-7:2018
DIN EN ISO 6145-5:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices (ISO 6145-5:2009); German version EN ISO 6145-5:2010
DIN EN ISO 6145-4:2008-11 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 4: Continuous syringe injection method (ISO 6145-4:2004); German version EN ISO 6145-4:2008
DIN EN ISO 6145-11:2008-11 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 11: Electrochemical generation (ISO 6145-11:2005); German version EN ISO 6145-11:2008
DIN EN ISO 6145-7:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2009); German version EN ISO 6145-7:2010
DIN EN 14662-3:2016-02 Ambient air - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography; German version EN 14662-3:2015

Korean Agency for Technology and Standards (KATS), Auto Calibration Method Gas

KS I ISO 6145-1-2015(2020) Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 1：Methods of calibration
KS I 2219-2015 General rules for calibration method of gas analyzer
KS B ISO 11943-2008(2018) Hydraulic fluid power－On-line automatic particle-counting systems for liquids－Methods of calibration and validation
KS B ISO 11943:2008 Hydraulic fluid power－On-line automatic particle-counting systems for liquids－Methods of calibration and validation
KS I 2219-2015(2020) General rules for calibration method of gas analyzer
KS I ISO 6145-5-2015(2020) Gas analysis－Preparation of calibraion gas mixtures using dynamic volumetric methods－Part 5：Capillary calibration devices
KS I ISO 6145-5:2010 Gas analysis-Preparation of calibraion gas mixtures using dynamic volumetric methods-Part 5:Capillary calibration devices
KS I ISO 6145-5:2015 Gas analysis－Preparation of calibraion gas mixtures using dynamic volumetric methods－Part 5：Capillary calibration devices
KS I ISO 6145-10:2020 Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 10: Permeation method
KS I ISO 6145-9:2020 Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 9: Saturation method
KS I ISO 6145-6-2015(2020) Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 6：Sonic orifices
KS I ISO 6145-1:2010 Gas analysis-Preparation of calibration gas mixtures using dynamic volumetric methods-Part 1:Methods of calibration
KS I ISO 6145-1:2015 Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 1：Methods of calibration
KS I ISO 6143-2015(2020) Gas analysis－Comparison methods for determining and checking the composition of calibration gas mixtures
KS I ISO 6145-6:2010 Gas analysis-Preparation of calibration gas mixtures using dynamic volumetric methods-Part 6:Sonic orifices
KS I ISO 6145-6:2015 Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 6：Sonic orifices
KS I ISO 6145-11-2015(2020) Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 11：Electrochemical generation
KS I ISO 6145-4-2015(2020) Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 4：Continuous syringe injection method
KS I ISO 6145-7:2010 Gas analysis-Preparation of calibration gas mixtures using dynamic volumetric methods-Part 7:Thermal mass-flow controllers
KS I ISO 6145-7:2015 Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 7：Thermal mass-flow controllers
KS C IEC 61303:2018 Medical electrical equipment — Radionuclide calibrators — Particular methods for describing performance
KS I ISO 14164:2006 Stationary source emissions－Determination of the volume flowrate of gas streams in ducts(Automated method)

Danish Standards Foundation, Auto Calibration Method Gas

DS/EN ISO 6145-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration
DS/EN ISO 6145-5:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices
DS/EN ISO 6145-9:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9: Saturation method
DS/EN ISO 6143:2006 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures
DS/EN ISO 6145-10:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10: Permeation method
DS/EN ISO 6145-8:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8: Diffusion method
DS/EN ISO 6145-6:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 6: Critical orifices
DS/EN ISO 6145-11:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 11: Electrochemical generation
DS/EN ISO 6145-4:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 4: Continuous syringe injection method
DS/EN ISO 6145-7:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers
DS/ISO 4402:1989 Hydraulic fluid power. Calibration of automatic-count instruments for particles suspended in liquids. Method using classified AC fine test dust contaminant
DS/ISO 14164:1999 Stationary source emissions - Determination of the volume flowrate of gas streams in ducts - Automated method

Professional Standard - Meteorology, Auto Calibration Method Gas

QX/T 291-2015 Field-calibration method for data logger of automatic weather station

Lithuanian Standards Office , Auto Calibration Method Gas

LST EN ISO 6145-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration (ISO 6145-1:2003)
LST EN ISO 6145-5:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices (ISO 6145-5:2009)
LST EN ISO 6145-10:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10: Permeation method (ISO 6145-10:2002)
LST EN ISO 6145-8:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8: Diffusion method (ISO 6145-8:2005)
LST EN ISO 6145-9:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9: Saturation method (ISO 6145-9:2009)
LST EN ISO 6143:2007 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures (ISO 6143:2001)
LST EN ISO 6145-6:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 6: Critical orifices (ISO 6145-6:2003)
LST EN ISO 6145-4:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 4: Continuous syringe injection method (ISO 6145-4:2004)
LST EN ISO 6145-11:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 11: Electrochemical generation (ISO 6145-11:2005)
LST EN ISO 6145-7:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2009)
LST ISO 14164:2001 Stationary source emissions - Determination of the volume flowrate of gas streams in ducts - Automated method (identical ISO 14164:1999)

AENOR, Auto Calibration Method Gas

UNE-EN ISO 6145-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration (ISO 6145-1:2003)
UNE-EN ISO 6145-5:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices (ISO 6145-5:2009)
UNE 77243-2:2004 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Part 2: Volumetric pumps
UNE-EN ISO 6145-10:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10: Permeation method (ISO 6145-10:2002)
UNE-EN ISO 6145-9:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9: Saturation method (ISO 6145-9:2009)
UNE-EN ISO 6145-8:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8: Diffusion method (ISO 6145-8:2005)
UNE-EN ISO 6143:2007 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures (ISO 6143:2001)
UNE-EN ISO 6145-6:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 6: Critical orifices (ISO 6145-6:2003)
UNE-EN ISO 6145-4:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 4: Continuous syringe injection method (ISO 6145-4:2004)
UNE-EN ISO 6145-11:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 11: Electrochemical generation (ISO 6145-11:2005)
UNE-EN ISO 6145-7:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2009)
UNE 77227:2001 Stationary source emissions. Determination of the volume flowrate of gas stream in ducts. Automated method.

Group Standards of the People's Republic of China, Auto Calibration Method Gas

T/CMA 032-2021 Calibration method for automatic benzene crystal point testers
T/CMA 037-2021 Calibration method for methanol alarm detectors
T/CMA 036-2021 Calibration method for ethylene oxide alarm detectors
T/CMA HG101-2023 calibration method for gas detectors and alarms of nitric oxide, nitrogen dioxide (measuring range 0 μmol/mol～500 μmol/mol) for mining

CZ-CSN, Auto Calibration Method Gas

CSN ISO 6145-1:1994 Gas analysis. Preparation of calibration gas mixtures. Dynamic volumetric methods
CSN 18 5201-1982 Technical requirements and testing methods of measuring transmitters with standard pneumatic output signál in automation

Association Francaise de Normalisation, Auto Calibration Method Gas

NF E48-682*NF ISO 11943:2021 Hydraulic fluid power - Online automatic particle-counting systems for liquids - Methods of calibration and validation
NF EN ISO 6145-5:2011 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes volumétriques dynamiques - Partie 5 : dispositifs d'étalonnage par capillaires
NF X20-204:1974 Gas analysis. Method for the dynamic preparation of gas mixtures for calibration by proportioning piston pumps.
NF X20-212:1986 Gas analysis. Preparation of calibration gas mixtures. Dynamic volumetric methods. Part 1 : methods of calibration.
NF X20-211:1983 Gas analysis. Preparation of calibration gas mixtures. Mass dynamic method.
NF E48-682:2000 Hydraulic fluid power - On-line liquid automatic particle-counting systems for liquid - Methods of calibration and validation.
NF X20-205-5*NF EN ISO 6145-5:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5 : capillary calibration devices
NF EN ISO 6145-1:2019 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes dynamiques - Partie 1 : aspects généraux
NF X20-205-6*NF EN ISO 6145-6:2017 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 6 : critical flow orifices
NF X20-205-9*NF EN ISO 6145-9:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9 : saturation method
NF ISO 11943:2021 Transmissions hydrauliques - Systèmes de comptage automatique en ligne de particules en suspension dans les liquides - Méthodes d'étalonnage et de validation
NF X20-205-8*NF EN ISO 6145-8:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8 : diffusion method.
NF X20-205-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1 : methods of calibration.
NF EN ISO 6143:2006 Analyse des gaz - Méthodes comparatives pour la détermination et la vérification de la composition des mélanges de gaz pour étalonnage
NF EN ISO 6145-8:2008 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes volumétriques dynamiques - Partie 8 : méthode par diffusion
NF EN ISO 6145-9:2011 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes volumétriques dynamiques - Partie 9 : méthode par saturation
NF EN ISO 6145-10:2008 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes volumétriques dynamiques - Partie 10 : méthode par perméation
NF EN ISO 6145-11:2008 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes volumétriques dynamiques - Partie 11 : génération électrochimique
NF X20-205-6:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 6 : critical orifices.
NF EN ISO 6145-7:2018 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes dynamiques - Partie 7 : régulateurs thermiques de débit massique
NF EN ISO 6145-6:2017 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes volumétriques dynamiques - Partie 6 : orifices de débit critiques
NF X20-205-7:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7 : thermal mass-flow controllers.
NF X20-105*NF ISO 12963:2017 Gas analysis - Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration
NF ISO 12963:2017 Analyse des gaz - Méthodes de comparaison pour la détermination de la composition des mélanges de gaz basées sur un ou deux points d'étalonnage
NF EN ISO 6145-4:2008 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes volumétriques dynamiques - Partie 4 : méthode continue par seringue d'injection
NF E29-445*NF EN 27842:1992 Automatic steam traps. Determination of discharge capacity. Test methods.
NF X20-105/A1*NF ISO 12963/A1:2021 Gas analysis - Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration - AMENDMENT 1 : correction to Formula 5
NF ISO 12963/A1:2021 Analyse des gaz - Méthodes de comparaison pour la détermination de la composition des mélanges de gaz basées sur un ou deux points d'étalonnage - Amendement 1 : correction de la Formule 5
NF EN ISO 8311:2014 Hydrocarbures réfrigérés et combustibles gazeux liquéfiés à base non pétrolière - Étalonnage des réservoirs à membrane et réservoirs pyramidaux - Méthodes manuelles et par mesurage électro-optique interne de la distance

International Organization for Standardization (ISO), Auto Calibration Method Gas

ISO 11943:2021 Hydraulic fluid power — Online automatic particle-counting systems for liquids — Methods of calibration and validation
ISO 11943:2018 Hydraulic fluid power - Online automatic particle-counting systems for liquids - Methods of calibration and validation
ISO 11943:1999 Hydraulic fluid power - On-line automatic particle-counting systems for liquids - Methods of calibration and validation
ISO 7395:1984 Gas analysis — Preparation of calibration gas mixtures — Mass dynamic method
ISO 4402:1977 Hydraulic fluid power; Calibration of liquid automatic particle-count instruments; Method using Air Cleaner Fine Test Dust contaminant
ISO 6145-5:2009 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices
ISO 6142:1981/Add 1:1983 Gas analysis — Preparation of calibration gas mixtures — Weighing methods — Addendum 1
ISO 6145-6:2017 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 6: Critical flow orifices
ISO 6145-2:2014 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 2: Piston pumps
ISO 6145-1:2003 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration
ISO/CD 6143 Gas analysis — Comparison methods for determining and checking the composition of calibration gas mixtures
ISO/DIS 6143:2023 Gas analysis — Comparison methods for determining and checking the composition of calibration gas mixtures
ISO 6145-1:1986 Gas analysis; Preparation of calibration gas mixtures; Dynamic volumetric methods; Part 1 : Methods of calibration
ISO 6145-3:1986 Gas analysis — Preparation of calibration gas mixtures — Dynamic volumetric methods — Part 3: Periodic injections into a flowing gas stream
ISO 6145-6:2003 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 6: Critical orifices
ISO 6145-1:2019 Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 11: Electrochemical generation
ISO 6145-7:2009 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers
ISO 6145-7:2018 Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 7: Thermal mass-flow controllers
ISO 6145-5:2001 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices
ISO 4402:1991 Hydraulic fluid power; calibration of automatic-count instruments for particles suspended in liquids; method using classified AC fine test dust contaminant
ISO 12963:2017/Amd 1:2020 Gas analysis - Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration - Amendment 1: Correction to Formula 5
ISO 14164:1999 Stationary source emissions - Determination of the volume flowrate of gas streams in ducts - Automated method
ISO 12917-1:2017/AWI Amd 1 Petroleum and liquid petroleum products — Calibration of horizontal cylindrical tanks — Part 1: Manual methods — Amendment 1

ES-UNE, Auto Calibration Method Gas

UNE-EN ISO 6145-1:2020 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 1: General aspects (ISO 6145-1:2019)
UNE-EN ISO 6145-6:2018 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 6: Critical flow orifices (ISO 6145-6:2017)
UNE-EN ISO 6145-7:2020 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2018)
UNE-EN 60444-5:1997 MEASUREMENT QUARTZ CRYSTAL UNIT PARAMETERS. PART 5: METHODS FOR THE DETERMINATION OF EQUIVALENT ELECTRICAL PARAMETERS USING AUTOMATIC NETWORK ANALYZER TECHNIQUES AND ERROR CORRECTION (Endorsed by AENOR in October of 1997.)
UNE-EN 14662-3:2016 Ambient air - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography

Japanese Industrial Standards Committee (JISC), Auto Calibration Method Gas

JIS K 0055:1986 General rules for calibration method of gas analyzer
JIS K 0055:2002 General rules for calibration method of gas analyzer
JIS B 9935:2001 Hydraulic fluid power -- On-line automatic particle-counting systems for liquids -- Methods of calibration and validation

American Society for Testing and Materials (ASTM), Auto Calibration Method Gas

ASTM E908-98(2012) Standard Practice for Calibrating Gaseous Reference Leaks
ASTM F377-80 Standard Method for Calibration Of Braking Force For Testing Of Pneumatic Tires
ASTM F377-94a(1999) Standard Practice for Calibration of Braking/Tractive Measuring Devices for Testing Tires
ASTM D5190-01 Standard Test Method for Vapor Pressure of Petroleum Products (Automatic Method)
ASTM D6749-02(2018) Standard Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method)
ASTM F1373-93(1999) Standard Test Method for Determination of Cycle Life of Automatic Valves for Gas Distribution System Components
ASTM F1373-93(2020) Standard Test Method for Determination of Cycle Life of Automatic Valves for Gas Distribution System Components
ASTM D6749-02 Standard Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method)
ASTM D6749-02(2007) Standard Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method)
ASTM D5190-07 Standard Test Method for Vapor Pressure of Petroleum Products (Automatic Method)
ASTM F1373-93(2005) Standard Test Method for Determination of Cycle Life of Automatic Valves for Gas Distribution System Components
ASTM F1373-93(2012) Standard Test Method for Determination of Cycle Life of Automatic Valves for Gas Distribution System Components
ASTM D6749-02(2012) Standard Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method)
ASTM F778-88(2007) Standard Methods for Gas Flow Resistance Testing of Filtration Media
ASTM D4525-04 Standard Test Method for Permeability of Rocks by Flowing Air
ASTM D4525-08 Standard Test Method for Permeability of Rocks by Flowing Air
ASTM F778-88(2023) Standard Methods for Gas Flow Resistance Testing of Filtration Media
ASTM D3270-91(1995)e1 Standard Test Methods for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Semiautomated Method)
ASTM F327-78(1996) Standard Practice for Sampling Gas Blow Down Systems and Components for Particulate Contamination by Automatic Particle Monitor Method
ASTM D8210-19a Standard Test Method for Automatic Determination of Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants Using a Rotational Viscometer
ASTM D8210-20 Standard Test Method for Automatic Determination of Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants Using a Rotational Viscometer
ASTM D8210-18 Standard Test Method for Automatic Determination of Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants Using a Rotational Viscometer
ASTM D8210-19 Standard Test Method for Automatic Determination of Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants Using a Rotational Viscometer
ASTM D8210-19b Standard Test Method for Automatic Determination of Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants Using a Rotational Viscometer
ASTM D8210-22 Standard Test Method for Automatic Determination of Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants Using a Rotational Viscometer
ASTM D7279-06 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer
ASTM D7279-08 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer
ASTM D3270-91e1 Standard Method for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Semiautomated Method)
ASTM D3270-80 Standard Method for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Semiautomated Method)
ASTM D7314-10 Standard Practice for Determination of the Heating Value of Gaseous Fuels using Calorimetry and On-line/At-line Sampling
ASTM D3270-00(2006) Standard Test Methods for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Semiautomated Method)
ASTM D3270-00 Standard Test Methods for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Semiautomated Method)
ASTM D3270-13(2021) Standard Test Methods for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Semiautomated Method)
ASTM D3270-13 Standard Test Methods for Analysis for Fluoride Content of the Atmosphere and Plant Tissues lpar;Semiautomated Methodrpar;
ASTM D7279-18e1 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer
ASTM D7454-08 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus
ASTM D7279-16 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer
ASTM D7279-18 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer
ASTM D7279-20 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer
ASTM D7454-14 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus
ASTM D7454-14e1 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus
ASTM D3266-91(2000)e1 Standard Test Method for Automated Separation and Collection of Particulate and Acidic Gaseous Fluoride in the Atmosphere (Double Paper Tape Sampler Method)
ASTM D3266-91(2018) Standard Test Method for Automated Separation and Collection of Particulate and Acidic Gaseous Fluoride in the Atmosphere (Double Paper Tape Sampler Method)
ASTM D7279-14 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer
ASTM D7279-14a Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer
ASTM D7828-12 Standard Test Method for Determination of Residue Composition in Liquefied Petroleum Gas (LPG) Using Automated Thermal Desorption/Gas Chromatography (ATD/GC)

Association of German Mechanical Engineers, Auto Calibration Method Gas

VDI 3490 Blatt 2-1980 Measurement of gases; calibration gas mixtures; preparation methods; general
VDI 3490 Blatt 7-1980 Measurement of gases; calibration gas mixtures; dynamic method of preparation by periodic injection
VDI 2100 Blatt 4-2015 Gaseous ambient air measurement - Indoor air pollution measurement - Gas chromatographic determination of organic compounds - Methods of preparing calibration gases and calibration solutions
VDI 2466 Blatt 2-2008 Gaseous emission measurement - Measurement of methane - Automatic method - Flame ionisation detector (FID)

Professional Standard - Petroleum, Auto Calibration Method Gas

SY/T 6810-2010 The calibration method of measuring instruments of core gas
SY 6810-2010 Calibration method of rock gas permeability tester

RU-GOST R, Auto Calibration Method Gas

GOST R ISO 11943-2010 Hydraulic fluid power. On-line automatic particle-counting systems for liquids. Methods of calibration and validation
GOST R 51383-2012 Automatic burner gas forced air. Technical safety requirements and test methods
GOST R 53283-2009 Automatic gas fire extinguishing systems. Distributing valves. General technical requirements. Test methods
GOST 32028-2012 Automatic shut-off valves for gas burners and gas appliances. General technical requirements and test methods
GOST R 53282-2009 Automatic gas fire extinguishing systems. Isothermal tanks. General technical requirements. Test methods
GOST R 53281-2009 Automatic gas fire extinguishing systems. Cylinders and cylinder banks. General technical requirements. Test methods
GOST R 56028-2014 Fire engineering. Automatic gas-powder fire extinguishing systems. General technical requirements. Test methods
GOST R EN 308-2011 Heat exchangers. Test methods for determining the power criteria of air/air and an air/exhaust gas mixture heat recovery devices
GOST 31850-2012 Automatic forced draught burners for gaseous fuels. Technical requirements, requirements of safety and test methods
GOST 12.4.238-2013 Occupational safety standards system. Air breathing self-contained apparatus. General technical requirements and testing methods

Professional Standard - Machinery, Auto Calibration Method Gas

JB/T 8626-1997 Preparation method of mixed gas product model for calibration

Society of Automotive Engineers (SAE), Auto Calibration Method Gas

SAE ARP1192-1971 METHOD FOR CALIBRATION AND VERIFICATION OF AUTOMATIC LIQUIDBORNE PARTICLE COUNTER (LIGHT METHOD)

KR-KS, Auto Calibration Method Gas

KS I ISO 6145-10-2020 Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 10: Permeation method
KS I ISO 6145-9-2020 Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 9: Saturation method
KS C IEC 61303-2018 Medical electrical equipment — Radionuclide calibrators — Particular methods for describing performance

未注明发布机构, Auto Calibration Method Gas

BS EN ISO 6143:2006(2007) Gas analysis — Comparison methods for determining and checking the composition of calibration gas mixtures
BS EN ISO 6145-8:2008(2009) Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 8 : Diffusion method
BS EN ISO 6145-10:2008(2009) Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 10 : Permeation method
BS EN ISO 6145-11:2008(2009) Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 11 : Electrochemical generation
BS EN ISO 6145-4:2008(2009) Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 4 : Continuous syringe injection method
BS 5540-6:1990(2011) Evaluating particulate contamination of hydraulic fluids — Part 6 : Method of calibrating liquid automatic particle - count instruments (using mono - sized latex spheres)

Professional Standard - Aerospace, Auto Calibration Method Gas

QJ 2873-1997 Method for calibrating pressure sensors and gauges with gaseous media

BELST, Auto Calibration Method Gas

STB 11.13.20-2010 System of fire safety standards. Automatic gas fire extinguishing systems. Cylinders and cylinder banks. General technical requirements. Test methods
STB 11.13.19-2010 Fire safety standards systems. Automatic powder fire extinguishing systems. Cylinders. General technical requirements. Test methods
STB 11.16.05-2011 System of fire safety standards. Installations of an aerosol fire extinguishing automatic. Fire-extinguishing aerosol generators. General technical requirements. Control methods

国家能源局, Auto Calibration Method Gas

SY/T 6679.4-2016 Comprehensive logging tool calibration method Part 4: Infrared gas analyzer

CEN - European Committee for Standardization, Auto Calibration Method Gas

EN ISO 6145-7:2018 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers

API - American Petroleum Institute, Auto Calibration Method Gas

API MPMS 4.9.4-2010 Manual of Petroleum Measurement Standards Chapter 4—Proving Systems Section 9—Methods of Calibration for Displacement and Volumetric Tank Provers Part 4—Determination of the Volume of Displacement and Tank Provers by the Gravimetric Method of Calibration
API MPMS 4.9.3-2010 Manual of Petroleum Measurement Standards Chapter 4—Proving Systems Section 9—Methods of Calibration for Displacement and Volumetric Tank Provers Part 3—Determination of the Volume of Displacement Provers by the Master Meter Method of Calibration Measurem

GOSTR, Auto Calibration Method Gas

GOST 32028-2017 Automatic shut-off valves for gas burners and gas appliances

Professional Standard - Nuclear Industry, Auto Calibration Method Gas

EJ/T 1010-1996 Calibration of α and β radioactive aerosol monitors and testing methods for effectiveness of radon daughter compensation